4 * Detection routine for the Gravis Ultrasound.
6 * Copyright (C) by Hannu Savolainen 1993-1997
9 * Frank van de Pol : Fixed GUS MAX interrupt handling, enabled simultanious
10 * usage of CS4231A codec, GUS wave and MIDI for GUS MAX.
11 * Christoph Hellwig: Adapted to module_init/module_exit, simple cleanups.
18 #include <linux/config.h>
19 #include <linux/init.h>
20 #include <linux/interrupt.h>
21 #include <linux/module.h>
23 #include "sound_config.h"
28 irqreturn_t
gusintr(int irq
, void *dev_id
, struct pt_regs
*dummy
);
30 int gus_base
= 0, gus_irq
= 0, gus_dma
= 0;
31 int gus_no_wave_dma
= 0;
32 extern int gus_wave_volume
;
33 extern int gus_pcm_volume
;
34 extern int have_gus_max
;
36 #ifdef CONFIG_SOUND_GUS16
37 static int db16
; /* Has a Gus16 AD1848 on it */
40 static void __init
attach_gus(struct address_info
*hw_config
)
42 gus_wave_init(hw_config
);
44 if (sound_alloc_dma(hw_config
->dma
, "GUS"))
45 printk(KERN_ERR
"gus_card.c: Can't allocate DMA channel %d\n", hw_config
->dma
);
46 if (hw_config
->dma2
!= -1 && hw_config
->dma2
!= hw_config
->dma
)
47 if (sound_alloc_dma(hw_config
->dma2
, "GUS(2)"))
48 printk(KERN_ERR
"gus_card.c: Can't allocate DMA channel %d\n", hw_config
->dma2
);
49 gus_midi_init(hw_config
);
50 if(request_irq(hw_config
->irq
, gusintr
, 0, "Gravis Ultrasound", hw_config
)<0)
51 printk(KERN_ERR
"gus_card.c: Unable to allocate IRQ %d\n", hw_config
->irq
);
56 static int __init
probe_gus(struct address_info
*hw_config
)
61 if (hw_config
->card_subtype
== 1)
66 if (hw_config
->card_subtype
== 0) /* GUS/MAX/ACE */
67 if (irq
!= 3 && irq
!= 5 && irq
!= 7 && irq
!= 9 &&
68 irq
!= 11 && irq
!= 12 && irq
!= 15)
70 printk(KERN_ERR
"GUS: Unsupported IRQ %d\n", irq
);
73 if (gus_wave_detect(hw_config
->io_base
))
76 #ifndef EXCLUDE_GUS_IODETECT
79 * Look at the possible base addresses (0x2X0, X=1, 2, 3, 4, 5, 6)
82 for (io_addr
= 0x210; io_addr
<= 0x260; io_addr
+= 0x10) {
83 if (io_addr
== hw_config
->io_base
) /* Already tested */
85 if (gus_wave_detect(io_addr
)) {
86 hw_config
->io_base
= io_addr
;
92 printk("NO GUS card found !\n");
96 static void __exit
unload_gus(struct address_info
*hw_config
)
98 DDB(printk("unload_gus(%x)\n", hw_config
->io_base
));
100 gus_wave_unload(hw_config
);
102 release_region(hw_config
->io_base
, 16);
103 release_region(hw_config
->io_base
+ 0x100, 12); /* 0x10c-> is MAX */
104 free_irq(hw_config
->irq
, hw_config
);
106 sound_free_dma(hw_config
->dma
);
108 if (hw_config
->dma2
!= -1 && hw_config
->dma2
!= hw_config
->dma
)
109 sound_free_dma(hw_config
->dma2
);
112 irqreturn_t
gusintr(int irq
, void *dev_id
, struct pt_regs
*dummy
)
115 extern int gus_timer_enabled
;
118 #ifdef CONFIG_SOUND_GUSMAX
120 struct address_info
*hw_config
= dev_id
;
121 adintr(irq
, (void *)hw_config
->slots
[1], NULL
);
124 #ifdef CONFIG_SOUND_GUS16
126 struct address_info
*hw_config
= dev_id
;
127 adintr(irq
, (void *)hw_config
->slots
[3], NULL
);
133 if (!(src
= inb(u_IrqStatus
)))
136 if (src
& DMA_TC_IRQ
)
140 if (src
& (MIDI_TX_IRQ
| MIDI_RX_IRQ
))
142 gus_midi_interrupt(0);
144 if (src
& (GF1_TIMER1_IRQ
| GF1_TIMER2_IRQ
))
146 if (gus_timer_enabled
)
147 sound_timer_interrupt();
148 gus_write8(0x45, 0); /* Ack IRQ */
149 gus_timer_command(4, 0x80); /* Reset IRQ flags */
151 if (src
& (WAVETABLE_IRQ
| ENVELOPE_IRQ
))
154 return IRQ_RETVAL(handled
);
158 * Some extra code for the 16 bit sampling option
161 #ifdef CONFIG_SOUND_GUS16
163 static int __init
init_gus_db16(struct address_info
*hw_config
)
165 struct resource
*ports
;
167 ports
= request_region(hw_config
->io_base
, 4, "ad1848");
171 if (!ad1848_detect(ports
, NULL
, hw_config
->osp
)) {
172 release_region(hw_config
->io_base
, 4);
176 gus_pcm_volume
= 100;
177 gus_wave_volume
= 90;
179 hw_config
->slots
[3] = ad1848_init("GUS 16 bit sampling", ports
,
188 static void __exit
unload_gus_db16(struct address_info
*hw_config
)
191 ad1848_unload(hw_config
->io_base
,
195 sound_unload_audiodev(hw_config
->slots
[3]);
199 #ifdef CONFIG_SOUND_GUS16
202 #ifdef CONFIG_SOUND_GUSMAX
203 static int no_wave_dma
; /* Set if no dma is to be used for the
204 wave table (GF1 chip) */
209 * Note DMA2 of -1 has the right meaning in the GUS driver as well
213 static struct address_info cfg
;
215 static int __initdata io
= -1;
216 static int __initdata irq
= -1;
217 static int __initdata dma
= -1;
218 static int __initdata dma16
= -1; /* Set this for modules that need it */
219 static int __initdata type
= 0; /* 1 for PnP */
221 module_param(io
, int, 0);
222 module_param(irq
, int, 0);
223 module_param(dma
, int, 0);
224 module_param(dma16
, int, 0);
225 module_param(type
, int, 0);
226 #ifdef CONFIG_SOUND_GUSMAX
227 module_param(no_wave_dma
, int, 0);
229 #ifdef CONFIG_SOUND_GUS16
230 module_param(db16
, int, 0);
231 module_param(gus16
, int, 0);
233 MODULE_LICENSE("GPL");
235 static int __init
init_gus(void)
237 printk(KERN_INFO
"Gravis Ultrasound audio driver Copyright (C) by Hannu Savolainen 1993-1996\n");
243 cfg
.card_subtype
= type
;
244 #ifdef CONFIG_SOUND_GUSMAX
245 gus_no_wave_dma
= no_wave_dma
;
248 if (cfg
.io_base
== -1 || cfg
.dma
== -1 || cfg
.irq
== -1) {
249 printk(KERN_ERR
"I/O, IRQ, and DMA are mandatory\n");
253 #ifdef CONFIG_SOUND_GUS16
254 if (gus16
&& init_gus_db16(&cfg
))
257 if (!probe_gus(&cfg
))
264 static void __exit
cleanup_gus(void)
266 #ifdef CONFIG_SOUND_GUS16
268 unload_gus_db16(&cfg
);
273 module_init(init_gus
);
274 module_exit(cleanup_gus
);
277 static int __init
setup_gus(char *str
)
279 /* io, irq, dma, dma2 */
282 str
= get_options(str
, ARRAY_SIZE(ints
), ints
);
292 __setup("gus=", setup_gus
);