Merge branch 'fix/hda' into for-linus
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / net / 82596.c
blob1663bc9e45dec633d723259f892d82da82c52d2d
1 /* 82596.c: A generic 82596 ethernet driver for linux. */
2 /*
3 Based on Apricot.c
4 Written 1994 by Mark Evans.
5 This driver is for the Apricot 82596 bus-master interface
7 Modularised 12/94 Mark Evans
10 Modified to support the 82596 ethernet chips on 680x0 VME boards.
11 by Richard Hirst <richard@sleepie.demon.co.uk>
12 Renamed to be 82596.c
14 980825: Changed to receive directly in to sk_buffs which are
15 allocated at open() time. Eliminates copy on incoming frames
16 (small ones are still copied). Shared data now held in a
17 non-cached page, so we can run on 68060 in copyback mode.
19 TBD:
20 * look at deferring rx frames rather than discarding (as per tulip)
21 * handle tx ring full as per tulip
22 * performance test to tune rx_copybreak
24 Most of my modifications relate to the braindead big-endian
25 implementation by Intel. When the i596 is operating in
26 'big-endian' mode, it thinks a 32 bit value of 0x12345678
27 should be stored as 0x56781234. This is a real pain, when
28 you have linked lists which are shared by the 680x0 and the
29 i596.
31 Driver skeleton
32 Written 1993 by Donald Becker.
33 Copyright 1993 United States Government as represented by the Director,
34 National Security Agency. This software may only be used and distributed
35 according to the terms of the GNU General Public License as modified by SRC,
36 incorporated herein by reference.
38 The author may be reached as becker@scyld.com, or C/O
39 Scyld Computing Corporation, 410 Severn Ave., Suite 210, Annapolis MD 21403
43 #include <linux/module.h>
44 #include <linux/kernel.h>
45 #include <linux/string.h>
46 #include <linux/errno.h>
47 #include <linux/ioport.h>
48 #include <linux/slab.h>
49 #include <linux/interrupt.h>
50 #include <linux/delay.h>
51 #include <linux/netdevice.h>
52 #include <linux/etherdevice.h>
53 #include <linux/skbuff.h>
54 #include <linux/init.h>
55 #include <linux/bitops.h>
57 #include <asm/io.h>
58 #include <asm/dma.h>
59 #include <asm/pgtable.h>
60 #include <asm/cacheflush.h>
62 static char version[] __initdata =
63 "82596.c $Revision: 1.5 $\n";
65 #define DRV_NAME "82596"
67 /* DEBUG flags
70 #define DEB_INIT 0x0001
71 #define DEB_PROBE 0x0002
72 #define DEB_SERIOUS 0x0004
73 #define DEB_ERRORS 0x0008
74 #define DEB_MULTI 0x0010
75 #define DEB_TDR 0x0020
76 #define DEB_OPEN 0x0040
77 #define DEB_RESET 0x0080
78 #define DEB_ADDCMD 0x0100
79 #define DEB_STATUS 0x0200
80 #define DEB_STARTTX 0x0400
81 #define DEB_RXADDR 0x0800
82 #define DEB_TXADDR 0x1000
83 #define DEB_RXFRAME 0x2000
84 #define DEB_INTS 0x4000
85 #define DEB_STRUCT 0x8000
86 #define DEB_ANY 0xffff
89 #define DEB(x,y) if (i596_debug & (x)) y
92 #if defined(CONFIG_MVME16x_NET) || defined(CONFIG_MVME16x_NET_MODULE)
93 #define ENABLE_MVME16x_NET
94 #endif
95 #if defined(CONFIG_BVME6000_NET) || defined(CONFIG_BVME6000_NET_MODULE)
96 #define ENABLE_BVME6000_NET
97 #endif
98 #if defined(CONFIG_APRICOT) || defined(CONFIG_APRICOT_MODULE)
99 #define ENABLE_APRICOT
100 #endif
102 #ifdef ENABLE_MVME16x_NET
103 #include <asm/mvme16xhw.h>
104 #endif
105 #ifdef ENABLE_BVME6000_NET
106 #include <asm/bvme6000hw.h>
107 #endif
110 * Define various macros for Channel Attention, word swapping etc., dependent
111 * on architecture. MVME and BVME are 680x0 based, otherwise it is Intel.
114 #ifdef __mc68000__
115 #define WSWAPrfd(x) ((struct i596_rfd *) (((u32)(x)<<16) | ((((u32)(x)))>>16)))
116 #define WSWAPrbd(x) ((struct i596_rbd *) (((u32)(x)<<16) | ((((u32)(x)))>>16)))
117 #define WSWAPiscp(x) ((struct i596_iscp *)(((u32)(x)<<16) | ((((u32)(x)))>>16)))
118 #define WSWAPscb(x) ((struct i596_scb *) (((u32)(x)<<16) | ((((u32)(x)))>>16)))
119 #define WSWAPcmd(x) ((struct i596_cmd *) (((u32)(x)<<16) | ((((u32)(x)))>>16)))
120 #define WSWAPtbd(x) ((struct i596_tbd *) (((u32)(x)<<16) | ((((u32)(x)))>>16)))
121 #define WSWAPchar(x) ((char *) (((u32)(x)<<16) | ((((u32)(x)))>>16)))
122 #define ISCP_BUSY 0x00010000
123 #define MACH_IS_APRICOT 0
124 #else
125 #define WSWAPrfd(x) ((struct i596_rfd *)((long)x))
126 #define WSWAPrbd(x) ((struct i596_rbd *)((long)x))
127 #define WSWAPiscp(x) ((struct i596_iscp *)((long)x))
128 #define WSWAPscb(x) ((struct i596_scb *)((long)x))
129 #define WSWAPcmd(x) ((struct i596_cmd *)((long)x))
130 #define WSWAPtbd(x) ((struct i596_tbd *)((long)x))
131 #define WSWAPchar(x) ((char *)((long)x))
132 #define ISCP_BUSY 0x0001
133 #define MACH_IS_APRICOT 1
134 #endif
137 * The MPU_PORT command allows direct access to the 82596. With PORT access
138 * the following commands are available (p5-18). The 32-bit port command
139 * must be word-swapped with the most significant word written first.
140 * This only applies to VME boards.
142 #define PORT_RESET 0x00 /* reset 82596 */
143 #define PORT_SELFTEST 0x01 /* selftest */
144 #define PORT_ALTSCP 0x02 /* alternate SCB address */
145 #define PORT_ALTDUMP 0x03 /* Alternate DUMP address */
147 static int i596_debug = (DEB_SERIOUS|DEB_PROBE);
149 MODULE_AUTHOR("Richard Hirst");
150 MODULE_DESCRIPTION("i82596 driver");
151 MODULE_LICENSE("GPL");
153 module_param(i596_debug, int, 0);
154 MODULE_PARM_DESC(i596_debug, "i82596 debug mask");
157 /* Copy frames shorter than rx_copybreak, otherwise pass on up in
158 * a full sized sk_buff. Value of 100 stolen from tulip.c (!alpha).
160 static int rx_copybreak = 100;
162 #define PKT_BUF_SZ 1536
163 #define MAX_MC_CNT 64
165 #define I596_TOTAL_SIZE 17
167 #define I596_NULL ((void *)0xffffffff)
169 #define CMD_EOL 0x8000 /* The last command of the list, stop. */
170 #define CMD_SUSP 0x4000 /* Suspend after doing cmd. */
171 #define CMD_INTR 0x2000 /* Interrupt after doing cmd. */
173 #define CMD_FLEX 0x0008 /* Enable flexible memory model */
175 enum commands {
176 CmdNOp = 0, CmdSASetup = 1, CmdConfigure = 2, CmdMulticastList = 3,
177 CmdTx = 4, CmdTDR = 5, CmdDump = 6, CmdDiagnose = 7
180 #define STAT_C 0x8000 /* Set to 0 after execution */
181 #define STAT_B 0x4000 /* Command being executed */
182 #define STAT_OK 0x2000 /* Command executed ok */
183 #define STAT_A 0x1000 /* Command aborted */
185 #define CUC_START 0x0100
186 #define CUC_RESUME 0x0200
187 #define CUC_SUSPEND 0x0300
188 #define CUC_ABORT 0x0400
189 #define RX_START 0x0010
190 #define RX_RESUME 0x0020
191 #define RX_SUSPEND 0x0030
192 #define RX_ABORT 0x0040
194 #define TX_TIMEOUT 5
197 struct i596_reg {
198 unsigned short porthi;
199 unsigned short portlo;
200 unsigned long ca;
203 #define EOF 0x8000
204 #define SIZE_MASK 0x3fff
206 struct i596_tbd {
207 unsigned short size;
208 unsigned short pad;
209 struct i596_tbd *next;
210 char *data;
213 /* The command structure has two 'next' pointers; v_next is the address of
214 * the next command as seen by the CPU, b_next is the address of the next
215 * command as seen by the 82596. The b_next pointer, as used by the 82596
216 * always references the status field of the next command, rather than the
217 * v_next field, because the 82596 is unaware of v_next. It may seem more
218 * logical to put v_next at the end of the structure, but we cannot do that
219 * because the 82596 expects other fields to be there, depending on command
220 * type.
223 struct i596_cmd {
224 struct i596_cmd *v_next; /* Address from CPUs viewpoint */
225 unsigned short status;
226 unsigned short command;
227 struct i596_cmd *b_next; /* Address from i596 viewpoint */
230 struct tx_cmd {
231 struct i596_cmd cmd;
232 struct i596_tbd *tbd;
233 unsigned short size;
234 unsigned short pad;
235 struct sk_buff *skb; /* So we can free it after tx */
238 struct tdr_cmd {
239 struct i596_cmd cmd;
240 unsigned short status;
241 unsigned short pad;
244 struct mc_cmd {
245 struct i596_cmd cmd;
246 short mc_cnt;
247 char mc_addrs[MAX_MC_CNT*6];
250 struct sa_cmd {
251 struct i596_cmd cmd;
252 char eth_addr[8];
255 struct cf_cmd {
256 struct i596_cmd cmd;
257 char i596_config[16];
260 struct i596_rfd {
261 unsigned short stat;
262 unsigned short cmd;
263 struct i596_rfd *b_next; /* Address from i596 viewpoint */
264 struct i596_rbd *rbd;
265 unsigned short count;
266 unsigned short size;
267 struct i596_rfd *v_next; /* Address from CPUs viewpoint */
268 struct i596_rfd *v_prev;
271 struct i596_rbd {
272 unsigned short count;
273 unsigned short zero1;
274 struct i596_rbd *b_next;
275 unsigned char *b_data; /* Address from i596 viewpoint */
276 unsigned short size;
277 unsigned short zero2;
278 struct sk_buff *skb;
279 struct i596_rbd *v_next;
280 struct i596_rbd *b_addr; /* This rbd addr from i596 view */
281 unsigned char *v_data; /* Address from CPUs viewpoint */
284 #define TX_RING_SIZE 64
285 #define RX_RING_SIZE 16
287 struct i596_scb {
288 unsigned short status;
289 unsigned short command;
290 struct i596_cmd *cmd;
291 struct i596_rfd *rfd;
292 unsigned long crc_err;
293 unsigned long align_err;
294 unsigned long resource_err;
295 unsigned long over_err;
296 unsigned long rcvdt_err;
297 unsigned long short_err;
298 unsigned short t_on;
299 unsigned short t_off;
302 struct i596_iscp {
303 unsigned long stat;
304 struct i596_scb *scb;
307 struct i596_scp {
308 unsigned long sysbus;
309 unsigned long pad;
310 struct i596_iscp *iscp;
313 struct i596_private {
314 volatile struct i596_scp scp;
315 volatile struct i596_iscp iscp;
316 volatile struct i596_scb scb;
317 struct sa_cmd sa_cmd;
318 struct cf_cmd cf_cmd;
319 struct tdr_cmd tdr_cmd;
320 struct mc_cmd mc_cmd;
321 unsigned long stat;
322 int last_restart __attribute__((aligned(4)));
323 struct i596_rfd *rfd_head;
324 struct i596_rbd *rbd_head;
325 struct i596_cmd *cmd_tail;
326 struct i596_cmd *cmd_head;
327 int cmd_backlog;
328 unsigned long last_cmd;
329 struct i596_rfd rfds[RX_RING_SIZE];
330 struct i596_rbd rbds[RX_RING_SIZE];
331 struct tx_cmd tx_cmds[TX_RING_SIZE];
332 struct i596_tbd tbds[TX_RING_SIZE];
333 int next_tx_cmd;
334 spinlock_t lock;
337 static char init_setup[] =
339 0x8E, /* length, prefetch on */
340 0xC8, /* fifo to 8, monitor off */
341 #ifdef CONFIG_VME
342 0xc0, /* don't save bad frames */
343 #else
344 0x80, /* don't save bad frames */
345 #endif
346 0x2E, /* No source address insertion, 8 byte preamble */
347 0x00, /* priority and backoff defaults */
348 0x60, /* interframe spacing */
349 0x00, /* slot time LSB */
350 0xf2, /* slot time and retries */
351 0x00, /* promiscuous mode */
352 0x00, /* collision detect */
353 0x40, /* minimum frame length */
354 0xff,
355 0x00,
356 0x7f /* *multi IA */ };
358 static int i596_open(struct net_device *dev);
359 static netdev_tx_t i596_start_xmit(struct sk_buff *skb, struct net_device *dev);
360 static irqreturn_t i596_interrupt(int irq, void *dev_id);
361 static int i596_close(struct net_device *dev);
362 static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd);
363 static void i596_tx_timeout (struct net_device *dev);
364 static void print_eth(unsigned char *buf, char *str);
365 static void set_multicast_list(struct net_device *dev);
367 static int rx_ring_size = RX_RING_SIZE;
368 static int ticks_limit = 25;
369 static int max_cmd_backlog = TX_RING_SIZE-1;
372 static inline void CA(struct net_device *dev)
374 #ifdef ENABLE_MVME16x_NET
375 if (MACH_IS_MVME16x) {
376 ((struct i596_reg *) dev->base_addr)->ca = 1;
378 #endif
379 #ifdef ENABLE_BVME6000_NET
380 if (MACH_IS_BVME6000) {
381 volatile u32 i;
383 i = *(volatile u32 *) (dev->base_addr);
385 #endif
386 #ifdef ENABLE_APRICOT
387 if (MACH_IS_APRICOT) {
388 outw(0, (short) (dev->base_addr) + 4);
390 #endif
394 static inline void MPU_PORT(struct net_device *dev, int c, volatile void *x)
396 #ifdef ENABLE_MVME16x_NET
397 if (MACH_IS_MVME16x) {
398 struct i596_reg *p = (struct i596_reg *) (dev->base_addr);
399 p->porthi = ((c) | (u32) (x)) & 0xffff;
400 p->portlo = ((c) | (u32) (x)) >> 16;
402 #endif
403 #ifdef ENABLE_BVME6000_NET
404 if (MACH_IS_BVME6000) {
405 u32 v = (u32) (c) | (u32) (x);
406 v = ((u32) (v) << 16) | ((u32) (v) >> 16);
407 *(volatile u32 *) dev->base_addr = v;
408 udelay(1);
409 *(volatile u32 *) dev->base_addr = v;
411 #endif
415 static inline int wait_istat(struct net_device *dev, struct i596_private *lp, int delcnt, char *str)
417 while (--delcnt && lp->iscp.stat)
418 udelay(10);
419 if (!delcnt) {
420 printk(KERN_ERR "%s: %s, status %4.4x, cmd %4.4x.\n",
421 dev->name, str, lp->scb.status, lp->scb.command);
422 return -1;
424 else
425 return 0;
429 static inline int wait_cmd(struct net_device *dev, struct i596_private *lp, int delcnt, char *str)
431 while (--delcnt && lp->scb.command)
432 udelay(10);
433 if (!delcnt) {
434 printk(KERN_ERR "%s: %s, status %4.4x, cmd %4.4x.\n",
435 dev->name, str, lp->scb.status, lp->scb.command);
436 return -1;
438 else
439 return 0;
443 static inline int wait_cfg(struct net_device *dev, struct i596_cmd *cmd, int delcnt, char *str)
445 volatile struct i596_cmd *c = cmd;
447 while (--delcnt && c->command)
448 udelay(10);
449 if (!delcnt) {
450 printk(KERN_ERR "%s: %s.\n", dev->name, str);
451 return -1;
453 else
454 return 0;
458 static void i596_display_data(struct net_device *dev)
460 struct i596_private *lp = dev->ml_priv;
461 struct i596_cmd *cmd;
462 struct i596_rfd *rfd;
463 struct i596_rbd *rbd;
465 printk(KERN_ERR "lp and scp at %p, .sysbus = %08lx, .iscp = %p\n",
466 &lp->scp, lp->scp.sysbus, lp->scp.iscp);
467 printk(KERN_ERR "iscp at %p, iscp.stat = %08lx, .scb = %p\n",
468 &lp->iscp, lp->iscp.stat, lp->iscp.scb);
469 printk(KERN_ERR "scb at %p, scb.status = %04x, .command = %04x,"
470 " .cmd = %p, .rfd = %p\n",
471 &lp->scb, lp->scb.status, lp->scb.command,
472 lp->scb.cmd, lp->scb.rfd);
473 printk(KERN_ERR " errors: crc %lx, align %lx, resource %lx,"
474 " over %lx, rcvdt %lx, short %lx\n",
475 lp->scb.crc_err, lp->scb.align_err, lp->scb.resource_err,
476 lp->scb.over_err, lp->scb.rcvdt_err, lp->scb.short_err);
477 cmd = lp->cmd_head;
478 while (cmd != I596_NULL) {
479 printk(KERN_ERR "cmd at %p, .status = %04x, .command = %04x, .b_next = %p\n",
480 cmd, cmd->status, cmd->command, cmd->b_next);
481 cmd = cmd->v_next;
483 rfd = lp->rfd_head;
484 printk(KERN_ERR "rfd_head = %p\n", rfd);
485 do {
486 printk(KERN_ERR " %p .stat %04x, .cmd %04x, b_next %p, rbd %p,"
487 " count %04x\n",
488 rfd, rfd->stat, rfd->cmd, rfd->b_next, rfd->rbd,
489 rfd->count);
490 rfd = rfd->v_next;
491 } while (rfd != lp->rfd_head);
492 rbd = lp->rbd_head;
493 printk(KERN_ERR "rbd_head = %p\n", rbd);
494 do {
495 printk(KERN_ERR " %p .count %04x, b_next %p, b_data %p, size %04x\n",
496 rbd, rbd->count, rbd->b_next, rbd->b_data, rbd->size);
497 rbd = rbd->v_next;
498 } while (rbd != lp->rbd_head);
502 #if defined(ENABLE_MVME16x_NET) || defined(ENABLE_BVME6000_NET)
503 static irqreturn_t i596_error(int irq, void *dev_id)
505 struct net_device *dev = dev_id;
506 #ifdef ENABLE_MVME16x_NET
507 if (MACH_IS_MVME16x) {
508 volatile unsigned char *pcc2 = (unsigned char *) 0xfff42000;
510 pcc2[0x28] = 1;
511 pcc2[0x2b] = 0x1d;
513 #endif
514 #ifdef ENABLE_BVME6000_NET
515 if (MACH_IS_BVME6000) {
516 volatile unsigned char *ethirq = (unsigned char *) BVME_ETHIRQ_REG;
518 *ethirq = 1;
519 *ethirq = 3;
521 #endif
522 printk(KERN_ERR "%s: Error interrupt\n", dev->name);
523 i596_display_data(dev);
524 return IRQ_HANDLED;
526 #endif
528 static inline void init_rx_bufs(struct net_device *dev)
530 struct i596_private *lp = dev->ml_priv;
531 int i;
532 struct i596_rfd *rfd;
533 struct i596_rbd *rbd;
535 /* First build the Receive Buffer Descriptor List */
537 for (i = 0, rbd = lp->rbds; i < rx_ring_size; i++, rbd++) {
538 struct sk_buff *skb = dev_alloc_skb(PKT_BUF_SZ);
540 if (skb == NULL)
541 panic("82596: alloc_skb() failed");
542 skb->dev = dev;
543 rbd->v_next = rbd+1;
544 rbd->b_next = WSWAPrbd(virt_to_bus(rbd+1));
545 rbd->b_addr = WSWAPrbd(virt_to_bus(rbd));
546 rbd->skb = skb;
547 rbd->v_data = skb->data;
548 rbd->b_data = WSWAPchar(virt_to_bus(skb->data));
549 rbd->size = PKT_BUF_SZ;
550 #ifdef __mc68000__
551 cache_clear(virt_to_phys(skb->data), PKT_BUF_SZ);
552 #endif
554 lp->rbd_head = lp->rbds;
555 rbd = lp->rbds + rx_ring_size - 1;
556 rbd->v_next = lp->rbds;
557 rbd->b_next = WSWAPrbd(virt_to_bus(lp->rbds));
559 /* Now build the Receive Frame Descriptor List */
561 for (i = 0, rfd = lp->rfds; i < rx_ring_size; i++, rfd++) {
562 rfd->rbd = I596_NULL;
563 rfd->v_next = rfd+1;
564 rfd->v_prev = rfd-1;
565 rfd->b_next = WSWAPrfd(virt_to_bus(rfd+1));
566 rfd->cmd = CMD_FLEX;
568 lp->rfd_head = lp->rfds;
569 lp->scb.rfd = WSWAPrfd(virt_to_bus(lp->rfds));
570 rfd = lp->rfds;
571 rfd->rbd = lp->rbd_head;
572 rfd->v_prev = lp->rfds + rx_ring_size - 1;
573 rfd = lp->rfds + rx_ring_size - 1;
574 rfd->v_next = lp->rfds;
575 rfd->b_next = WSWAPrfd(virt_to_bus(lp->rfds));
576 rfd->cmd = CMD_EOL|CMD_FLEX;
579 static inline void remove_rx_bufs(struct net_device *dev)
581 struct i596_private *lp = dev->ml_priv;
582 struct i596_rbd *rbd;
583 int i;
585 for (i = 0, rbd = lp->rbds; i < rx_ring_size; i++, rbd++) {
586 if (rbd->skb == NULL)
587 break;
588 dev_kfree_skb(rbd->skb);
593 static void rebuild_rx_bufs(struct net_device *dev)
595 struct i596_private *lp = dev->ml_priv;
596 int i;
598 /* Ensure rx frame/buffer descriptors are tidy */
600 for (i = 0; i < rx_ring_size; i++) {
601 lp->rfds[i].rbd = I596_NULL;
602 lp->rfds[i].cmd = CMD_FLEX;
604 lp->rfds[rx_ring_size-1].cmd = CMD_EOL|CMD_FLEX;
605 lp->rfd_head = lp->rfds;
606 lp->scb.rfd = WSWAPrfd(virt_to_bus(lp->rfds));
607 lp->rbd_head = lp->rbds;
608 lp->rfds[0].rbd = WSWAPrbd(virt_to_bus(lp->rbds));
612 static int init_i596_mem(struct net_device *dev)
614 struct i596_private *lp = dev->ml_priv;
615 #if !defined(ENABLE_MVME16x_NET) && !defined(ENABLE_BVME6000_NET) || defined(ENABLE_APRICOT)
616 short ioaddr = dev->base_addr;
617 #endif
618 unsigned long flags;
620 MPU_PORT(dev, PORT_RESET, NULL);
622 udelay(100); /* Wait 100us - seems to help */
624 #if defined(ENABLE_MVME16x_NET) || defined(ENABLE_BVME6000_NET)
625 #ifdef ENABLE_MVME16x_NET
626 if (MACH_IS_MVME16x) {
627 volatile unsigned char *pcc2 = (unsigned char *) 0xfff42000;
629 /* Disable all ints for now */
630 pcc2[0x28] = 1;
631 pcc2[0x2a] = 0x48;
632 /* Following disables snooping. Snooping is not required
633 * as we make appropriate use of non-cached pages for
634 * shared data, and cache_push/cache_clear.
636 pcc2[0x2b] = 0x08;
638 #endif
639 #ifdef ENABLE_BVME6000_NET
640 if (MACH_IS_BVME6000) {
641 volatile unsigned char *ethirq = (unsigned char *) BVME_ETHIRQ_REG;
643 *ethirq = 1;
645 #endif
647 /* change the scp address */
649 MPU_PORT(dev, PORT_ALTSCP, (void *)virt_to_bus((void *)&lp->scp));
651 #elif defined(ENABLE_APRICOT)
654 u32 scp = virt_to_bus(&lp->scp);
656 /* change the scp address */
657 outw(0, ioaddr);
658 outw(0, ioaddr);
659 outb(4, ioaddr + 0xf);
660 outw(scp | 2, ioaddr);
661 outw(scp >> 16, ioaddr);
663 #endif
665 lp->last_cmd = jiffies;
667 #ifdef ENABLE_MVME16x_NET
668 if (MACH_IS_MVME16x)
669 lp->scp.sysbus = 0x00000054;
670 #endif
671 #ifdef ENABLE_BVME6000_NET
672 if (MACH_IS_BVME6000)
673 lp->scp.sysbus = 0x0000004c;
674 #endif
675 #ifdef ENABLE_APRICOT
676 if (MACH_IS_APRICOT)
677 lp->scp.sysbus = 0x00440000;
678 #endif
680 lp->scp.iscp = WSWAPiscp(virt_to_bus((void *)&lp->iscp));
681 lp->iscp.scb = WSWAPscb(virt_to_bus((void *)&lp->scb));
682 lp->iscp.stat = ISCP_BUSY;
683 lp->cmd_backlog = 0;
685 lp->cmd_head = lp->scb.cmd = I596_NULL;
687 #ifdef ENABLE_BVME6000_NET
688 if (MACH_IS_BVME6000) {
689 lp->scb.t_on = 7 * 25;
690 lp->scb.t_off = 1 * 25;
692 #endif
694 DEB(DEB_INIT,printk(KERN_DEBUG "%s: starting i82596.\n", dev->name));
696 #if defined(ENABLE_APRICOT)
697 (void) inb(ioaddr + 0x10);
698 outb(4, ioaddr + 0xf);
699 #endif
700 CA(dev);
702 if (wait_istat(dev,lp,1000,"initialization timed out"))
703 goto failed;
704 DEB(DEB_INIT,printk(KERN_DEBUG "%s: i82596 initialization successful\n", dev->name));
706 /* Ensure rx frame/buffer descriptors are tidy */
707 rebuild_rx_bufs(dev);
708 lp->scb.command = 0;
710 #ifdef ENABLE_MVME16x_NET
711 if (MACH_IS_MVME16x) {
712 volatile unsigned char *pcc2 = (unsigned char *) 0xfff42000;
714 /* Enable ints, etc. now */
715 pcc2[0x2a] = 0x55; /* Edge sensitive */
716 pcc2[0x2b] = 0x15;
718 #endif
719 #ifdef ENABLE_BVME6000_NET
720 if (MACH_IS_BVME6000) {
721 volatile unsigned char *ethirq = (unsigned char *) BVME_ETHIRQ_REG;
723 *ethirq = 3;
725 #endif
728 DEB(DEB_INIT,printk(KERN_DEBUG "%s: queuing CmdConfigure\n", dev->name));
729 memcpy(lp->cf_cmd.i596_config, init_setup, 14);
730 lp->cf_cmd.cmd.command = CmdConfigure;
731 i596_add_cmd(dev, &lp->cf_cmd.cmd);
733 DEB(DEB_INIT,printk(KERN_DEBUG "%s: queuing CmdSASetup\n", dev->name));
734 memcpy(lp->sa_cmd.eth_addr, dev->dev_addr, 6);
735 lp->sa_cmd.cmd.command = CmdSASetup;
736 i596_add_cmd(dev, &lp->sa_cmd.cmd);
738 DEB(DEB_INIT,printk(KERN_DEBUG "%s: queuing CmdTDR\n", dev->name));
739 lp->tdr_cmd.cmd.command = CmdTDR;
740 i596_add_cmd(dev, &lp->tdr_cmd.cmd);
742 spin_lock_irqsave (&lp->lock, flags);
744 if (wait_cmd(dev,lp,1000,"timed out waiting to issue RX_START")) {
745 spin_unlock_irqrestore (&lp->lock, flags);
746 goto failed;
748 DEB(DEB_INIT,printk(KERN_DEBUG "%s: Issuing RX_START\n", dev->name));
749 lp->scb.command = RX_START;
750 CA(dev);
752 spin_unlock_irqrestore (&lp->lock, flags);
754 if (wait_cmd(dev,lp,1000,"RX_START not processed"))
755 goto failed;
756 DEB(DEB_INIT,printk(KERN_DEBUG "%s: Receive unit started OK\n", dev->name));
757 return 0;
759 failed:
760 printk(KERN_CRIT "%s: Failed to initialise 82596\n", dev->name);
761 MPU_PORT(dev, PORT_RESET, NULL);
762 return -1;
765 static inline int i596_rx(struct net_device *dev)
767 struct i596_private *lp = dev->ml_priv;
768 struct i596_rfd *rfd;
769 struct i596_rbd *rbd;
770 int frames = 0;
772 DEB(DEB_RXFRAME,printk(KERN_DEBUG "i596_rx(), rfd_head %p, rbd_head %p\n",
773 lp->rfd_head, lp->rbd_head));
775 rfd = lp->rfd_head; /* Ref next frame to check */
777 while ((rfd->stat) & STAT_C) { /* Loop while complete frames */
778 if (rfd->rbd == I596_NULL)
779 rbd = I596_NULL;
780 else if (rfd->rbd == lp->rbd_head->b_addr)
781 rbd = lp->rbd_head;
782 else {
783 printk(KERN_CRIT "%s: rbd chain broken!\n", dev->name);
784 /* XXX Now what? */
785 rbd = I596_NULL;
787 DEB(DEB_RXFRAME, printk(KERN_DEBUG " rfd %p, rfd.rbd %p, rfd.stat %04x\n",
788 rfd, rfd->rbd, rfd->stat));
790 if (rbd != I596_NULL && ((rfd->stat) & STAT_OK)) {
791 /* a good frame */
792 int pkt_len = rbd->count & 0x3fff;
793 struct sk_buff *skb = rbd->skb;
794 int rx_in_place = 0;
796 DEB(DEB_RXADDR,print_eth(rbd->v_data, "received"));
797 frames++;
799 /* Check if the packet is long enough to just accept
800 * without copying to a properly sized skbuff.
803 if (pkt_len > rx_copybreak) {
804 struct sk_buff *newskb;
806 /* Get fresh skbuff to replace filled one. */
807 newskb = dev_alloc_skb(PKT_BUF_SZ);
808 if (newskb == NULL) {
809 skb = NULL; /* drop pkt */
810 goto memory_squeeze;
812 /* Pass up the skb already on the Rx ring. */
813 skb_put(skb, pkt_len);
814 rx_in_place = 1;
815 rbd->skb = newskb;
816 newskb->dev = dev;
817 rbd->v_data = newskb->data;
818 rbd->b_data = WSWAPchar(virt_to_bus(newskb->data));
819 #ifdef __mc68000__
820 cache_clear(virt_to_phys(newskb->data), PKT_BUF_SZ);
821 #endif
823 else
824 skb = dev_alloc_skb(pkt_len + 2);
825 memory_squeeze:
826 if (skb == NULL) {
827 /* XXX tulip.c can defer packets here!! */
828 printk(KERN_WARNING "%s: i596_rx Memory squeeze, dropping packet.\n", dev->name);
829 dev->stats.rx_dropped++;
831 else {
832 if (!rx_in_place) {
833 /* 16 byte align the data fields */
834 skb_reserve(skb, 2);
835 memcpy(skb_put(skb,pkt_len), rbd->v_data, pkt_len);
837 skb->protocol=eth_type_trans(skb,dev);
838 skb->len = pkt_len;
839 #ifdef __mc68000__
840 cache_clear(virt_to_phys(rbd->skb->data),
841 pkt_len);
842 #endif
843 netif_rx(skb);
844 dev->stats.rx_packets++;
845 dev->stats.rx_bytes+=pkt_len;
848 else {
849 DEB(DEB_ERRORS, printk(KERN_DEBUG "%s: Error, rfd.stat = 0x%04x\n",
850 dev->name, rfd->stat));
851 dev->stats.rx_errors++;
852 if ((rfd->stat) & 0x0001)
853 dev->stats.collisions++;
854 if ((rfd->stat) & 0x0080)
855 dev->stats.rx_length_errors++;
856 if ((rfd->stat) & 0x0100)
857 dev->stats.rx_over_errors++;
858 if ((rfd->stat) & 0x0200)
859 dev->stats.rx_fifo_errors++;
860 if ((rfd->stat) & 0x0400)
861 dev->stats.rx_frame_errors++;
862 if ((rfd->stat) & 0x0800)
863 dev->stats.rx_crc_errors++;
864 if ((rfd->stat) & 0x1000)
865 dev->stats.rx_length_errors++;
868 /* Clear the buffer descriptor count and EOF + F flags */
870 if (rbd != I596_NULL && (rbd->count & 0x4000)) {
871 rbd->count = 0;
872 lp->rbd_head = rbd->v_next;
875 /* Tidy the frame descriptor, marking it as end of list */
877 rfd->rbd = I596_NULL;
878 rfd->stat = 0;
879 rfd->cmd = CMD_EOL|CMD_FLEX;
880 rfd->count = 0;
882 /* Remove end-of-list from old end descriptor */
884 rfd->v_prev->cmd = CMD_FLEX;
886 /* Update record of next frame descriptor to process */
888 lp->scb.rfd = rfd->b_next;
889 lp->rfd_head = rfd->v_next;
890 rfd = lp->rfd_head;
893 DEB(DEB_RXFRAME,printk(KERN_DEBUG "frames %d\n", frames));
895 return 0;
899 static void i596_cleanup_cmd(struct net_device *dev, struct i596_private *lp)
901 struct i596_cmd *ptr;
903 while (lp->cmd_head != I596_NULL) {
904 ptr = lp->cmd_head;
905 lp->cmd_head = ptr->v_next;
906 lp->cmd_backlog--;
908 switch ((ptr->command) & 0x7) {
909 case CmdTx:
911 struct tx_cmd *tx_cmd = (struct tx_cmd *) ptr;
912 struct sk_buff *skb = tx_cmd->skb;
914 dev_kfree_skb(skb);
916 dev->stats.tx_errors++;
917 dev->stats.tx_aborted_errors++;
919 ptr->v_next = ptr->b_next = I596_NULL;
920 tx_cmd->cmd.command = 0; /* Mark as free */
921 break;
923 default:
924 ptr->v_next = ptr->b_next = I596_NULL;
928 wait_cmd(dev,lp,100,"i596_cleanup_cmd timed out");
929 lp->scb.cmd = I596_NULL;
932 static void i596_reset(struct net_device *dev, struct i596_private *lp,
933 int ioaddr)
935 unsigned long flags;
937 DEB(DEB_RESET,printk(KERN_DEBUG "i596_reset\n"));
939 spin_lock_irqsave (&lp->lock, flags);
941 wait_cmd(dev,lp,100,"i596_reset timed out");
943 netif_stop_queue(dev);
945 lp->scb.command = CUC_ABORT | RX_ABORT;
946 CA(dev);
948 /* wait for shutdown */
949 wait_cmd(dev,lp,1000,"i596_reset 2 timed out");
950 spin_unlock_irqrestore (&lp->lock, flags);
952 i596_cleanup_cmd(dev,lp);
953 i596_rx(dev);
955 netif_start_queue(dev);
956 init_i596_mem(dev);
959 static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd)
961 struct i596_private *lp = dev->ml_priv;
962 int ioaddr = dev->base_addr;
963 unsigned long flags;
965 DEB(DEB_ADDCMD,printk(KERN_DEBUG "i596_add_cmd\n"));
967 cmd->status = 0;
968 cmd->command |= (CMD_EOL | CMD_INTR);
969 cmd->v_next = cmd->b_next = I596_NULL;
971 spin_lock_irqsave (&lp->lock, flags);
973 if (lp->cmd_head != I596_NULL) {
974 lp->cmd_tail->v_next = cmd;
975 lp->cmd_tail->b_next = WSWAPcmd(virt_to_bus(&cmd->status));
976 } else {
977 lp->cmd_head = cmd;
978 wait_cmd(dev,lp,100,"i596_add_cmd timed out");
979 lp->scb.cmd = WSWAPcmd(virt_to_bus(&cmd->status));
980 lp->scb.command = CUC_START;
981 CA(dev);
983 lp->cmd_tail = cmd;
984 lp->cmd_backlog++;
986 spin_unlock_irqrestore (&lp->lock, flags);
988 if (lp->cmd_backlog > max_cmd_backlog) {
989 unsigned long tickssofar = jiffies - lp->last_cmd;
991 if (tickssofar < ticks_limit)
992 return;
994 printk(KERN_NOTICE "%s: command unit timed out, status resetting.\n", dev->name);
996 i596_reset(dev, lp, ioaddr);
1000 static int i596_open(struct net_device *dev)
1002 int res = 0;
1004 DEB(DEB_OPEN,printk(KERN_DEBUG "%s: i596_open() irq %d.\n", dev->name, dev->irq));
1006 if (request_irq(dev->irq, i596_interrupt, 0, "i82596", dev)) {
1007 printk(KERN_ERR "%s: IRQ %d not free\n", dev->name, dev->irq);
1008 return -EAGAIN;
1010 #ifdef ENABLE_MVME16x_NET
1011 if (MACH_IS_MVME16x) {
1012 if (request_irq(0x56, i596_error, 0, "i82596_error", dev))
1013 return -EAGAIN;
1015 #endif
1016 init_rx_bufs(dev);
1018 netif_start_queue(dev);
1020 /* Initialize the 82596 memory */
1021 if (init_i596_mem(dev)) {
1022 res = -EAGAIN;
1023 free_irq(dev->irq, dev);
1026 return res;
1029 static void i596_tx_timeout (struct net_device *dev)
1031 struct i596_private *lp = dev->ml_priv;
1032 int ioaddr = dev->base_addr;
1034 /* Transmitter timeout, serious problems. */
1035 DEB(DEB_ERRORS,printk(KERN_ERR "%s: transmit timed out, status resetting.\n",
1036 dev->name));
1038 dev->stats.tx_errors++;
1040 /* Try to restart the adaptor */
1041 if (lp->last_restart == dev->stats.tx_packets) {
1042 DEB(DEB_ERRORS,printk(KERN_ERR "Resetting board.\n"));
1043 /* Shutdown and restart */
1044 i596_reset (dev, lp, ioaddr);
1045 } else {
1046 /* Issue a channel attention signal */
1047 DEB(DEB_ERRORS,printk(KERN_ERR "Kicking board.\n"));
1048 lp->scb.command = CUC_START | RX_START;
1049 CA (dev);
1050 lp->last_restart = dev->stats.tx_packets;
1053 dev->trans_start = jiffies;
1054 netif_wake_queue (dev);
1057 static netdev_tx_t i596_start_xmit(struct sk_buff *skb, struct net_device *dev)
1059 struct i596_private *lp = dev->ml_priv;
1060 struct tx_cmd *tx_cmd;
1061 struct i596_tbd *tbd;
1062 short length = skb->len;
1063 dev->trans_start = jiffies;
1065 DEB(DEB_STARTTX,printk(KERN_DEBUG "%s: i596_start_xmit(%x,%p) called\n",
1066 dev->name, skb->len, skb->data));
1068 if (skb->len < ETH_ZLEN) {
1069 if (skb_padto(skb, ETH_ZLEN))
1070 return NETDEV_TX_OK;
1071 length = ETH_ZLEN;
1073 netif_stop_queue(dev);
1075 tx_cmd = lp->tx_cmds + lp->next_tx_cmd;
1076 tbd = lp->tbds + lp->next_tx_cmd;
1078 if (tx_cmd->cmd.command) {
1079 printk(KERN_NOTICE "%s: xmit ring full, dropping packet.\n",
1080 dev->name);
1081 dev->stats.tx_dropped++;
1083 dev_kfree_skb(skb);
1084 } else {
1085 if (++lp->next_tx_cmd == TX_RING_SIZE)
1086 lp->next_tx_cmd = 0;
1087 tx_cmd->tbd = WSWAPtbd(virt_to_bus(tbd));
1088 tbd->next = I596_NULL;
1090 tx_cmd->cmd.command = CMD_FLEX | CmdTx;
1091 tx_cmd->skb = skb;
1093 tx_cmd->pad = 0;
1094 tx_cmd->size = 0;
1095 tbd->pad = 0;
1096 tbd->size = EOF | length;
1098 tbd->data = WSWAPchar(virt_to_bus(skb->data));
1100 #ifdef __mc68000__
1101 cache_push(virt_to_phys(skb->data), length);
1102 #endif
1103 DEB(DEB_TXADDR,print_eth(skb->data, "tx-queued"));
1104 i596_add_cmd(dev, &tx_cmd->cmd);
1106 dev->stats.tx_packets++;
1107 dev->stats.tx_bytes += length;
1110 netif_start_queue(dev);
1112 return NETDEV_TX_OK;
1115 static void print_eth(unsigned char *add, char *str)
1117 printk(KERN_DEBUG "i596 0x%p, %pM --> %pM %02X%02X, %s\n",
1118 add, add + 6, add, add[12], add[13], str);
1121 static int io = 0x300;
1122 static int irq = 10;
1124 static const struct net_device_ops i596_netdev_ops = {
1125 .ndo_open = i596_open,
1126 .ndo_stop = i596_close,
1127 .ndo_start_xmit = i596_start_xmit,
1128 .ndo_set_multicast_list = set_multicast_list,
1129 .ndo_tx_timeout = i596_tx_timeout,
1130 .ndo_change_mtu = eth_change_mtu,
1131 .ndo_set_mac_address = eth_mac_addr,
1132 .ndo_validate_addr = eth_validate_addr,
1135 struct net_device * __init i82596_probe(int unit)
1137 struct net_device *dev;
1138 int i;
1139 struct i596_private *lp;
1140 char eth_addr[8];
1141 static int probed;
1142 int err;
1144 if (probed)
1145 return ERR_PTR(-ENODEV);
1146 probed++;
1148 dev = alloc_etherdev(0);
1149 if (!dev)
1150 return ERR_PTR(-ENOMEM);
1152 if (unit >= 0) {
1153 sprintf(dev->name, "eth%d", unit);
1154 netdev_boot_setup_check(dev);
1155 } else {
1156 dev->base_addr = io;
1157 dev->irq = irq;
1160 #ifdef ENABLE_MVME16x_NET
1161 if (MACH_IS_MVME16x) {
1162 if (mvme16x_config & MVME16x_CONFIG_NO_ETHERNET) {
1163 printk(KERN_NOTICE "Ethernet probe disabled - chip not present\n");
1164 err = -ENODEV;
1165 goto out;
1167 memcpy(eth_addr, (void *) 0xfffc1f2c, 6); /* YUCK! Get addr from NOVRAM */
1168 dev->base_addr = MVME_I596_BASE;
1169 dev->irq = (unsigned) MVME16x_IRQ_I596;
1170 goto found;
1172 #endif
1173 #ifdef ENABLE_BVME6000_NET
1174 if (MACH_IS_BVME6000) {
1175 volatile unsigned char *rtc = (unsigned char *) BVME_RTC_BASE;
1176 unsigned char msr = rtc[3];
1177 int i;
1179 rtc[3] |= 0x80;
1180 for (i = 0; i < 6; i++)
1181 eth_addr[i] = rtc[i * 4 + 7]; /* Stored in RTC RAM at offset 1 */
1182 rtc[3] = msr;
1183 dev->base_addr = BVME_I596_BASE;
1184 dev->irq = (unsigned) BVME_IRQ_I596;
1185 goto found;
1187 #endif
1188 #ifdef ENABLE_APRICOT
1190 int checksum = 0;
1191 int ioaddr = 0x300;
1193 /* this is easy the ethernet interface can only be at 0x300 */
1194 /* first check nothing is already registered here */
1196 if (!request_region(ioaddr, I596_TOTAL_SIZE, DRV_NAME)) {
1197 printk(KERN_ERR "82596: IO address 0x%04x in use\n", ioaddr);
1198 err = -EBUSY;
1199 goto out;
1202 dev->base_addr = ioaddr;
1204 for (i = 0; i < 8; i++) {
1205 eth_addr[i] = inb(ioaddr + 8 + i);
1206 checksum += eth_addr[i];
1209 /* checksum is a multiple of 0x100, got this wrong first time
1210 some machines have 0x100, some 0x200. The DOS driver doesn't
1211 even bother with the checksum.
1212 Some other boards trip the checksum.. but then appear as
1213 ether address 0. Trap these - AC */
1215 if ((checksum % 0x100) ||
1216 (memcmp(eth_addr, "\x00\x00\x49", 3) != 0)) {
1217 err = -ENODEV;
1218 goto out1;
1221 dev->irq = 10;
1222 goto found;
1224 #endif
1225 err = -ENODEV;
1226 goto out;
1228 found:
1229 dev->mem_start = (int)__get_free_pages(GFP_ATOMIC, 0);
1230 if (!dev->mem_start) {
1231 err = -ENOMEM;
1232 goto out1;
1235 DEB(DEB_PROBE,printk(KERN_INFO "%s: 82596 at %#3lx,", dev->name, dev->base_addr));
1237 for (i = 0; i < 6; i++)
1238 DEB(DEB_PROBE,printk(" %2.2X", dev->dev_addr[i] = eth_addr[i]));
1240 DEB(DEB_PROBE,printk(" IRQ %d.\n", dev->irq));
1242 DEB(DEB_PROBE,printk(KERN_INFO "%s", version));
1244 /* The 82596-specific entries in the device structure. */
1245 dev->netdev_ops = &i596_netdev_ops;
1246 dev->watchdog_timeo = TX_TIMEOUT;
1248 dev->ml_priv = (void *)(dev->mem_start);
1250 lp = dev->ml_priv;
1251 DEB(DEB_INIT,printk(KERN_DEBUG "%s: lp at 0x%08lx (%zd bytes), "
1252 "lp->scb at 0x%08lx\n",
1253 dev->name, (unsigned long)lp,
1254 sizeof(struct i596_private), (unsigned long)&lp->scb));
1255 memset((void *) lp, 0, sizeof(struct i596_private));
1257 #ifdef __mc68000__
1258 cache_push(virt_to_phys((void *)(dev->mem_start)), 4096);
1259 cache_clear(virt_to_phys((void *)(dev->mem_start)), 4096);
1260 kernel_set_cachemode((void *)(dev->mem_start), 4096, IOMAP_NOCACHE_SER);
1261 #endif
1262 lp->scb.command = 0;
1263 lp->scb.cmd = I596_NULL;
1264 lp->scb.rfd = I596_NULL;
1265 spin_lock_init(&lp->lock);
1267 err = register_netdev(dev);
1268 if (err)
1269 goto out2;
1270 return dev;
1271 out2:
1272 #ifdef __mc68000__
1273 /* XXX This assumes default cache mode to be IOMAP_FULL_CACHING,
1274 * XXX which may be invalid (CONFIG_060_WRITETHROUGH)
1276 kernel_set_cachemode((void *)(dev->mem_start), 4096,
1277 IOMAP_FULL_CACHING);
1278 #endif
1279 free_page ((u32)(dev->mem_start));
1280 out1:
1281 #ifdef ENABLE_APRICOT
1282 release_region(dev->base_addr, I596_TOTAL_SIZE);
1283 #endif
1284 out:
1285 free_netdev(dev);
1286 return ERR_PTR(err);
1289 static irqreturn_t i596_interrupt(int irq, void *dev_id)
1291 struct net_device *dev = dev_id;
1292 struct i596_private *lp;
1293 short ioaddr;
1294 unsigned short status, ack_cmd = 0;
1295 int handled = 0;
1297 #ifdef ENABLE_BVME6000_NET
1298 if (MACH_IS_BVME6000) {
1299 if (*(char *) BVME_LOCAL_IRQ_STAT & BVME_ETHERR) {
1300 i596_error(irq, dev_id);
1301 return IRQ_HANDLED;
1304 #endif
1305 if (dev == NULL) {
1306 printk(KERN_ERR "i596_interrupt(): irq %d for unknown device.\n", irq);
1307 return IRQ_NONE;
1310 ioaddr = dev->base_addr;
1311 lp = dev->ml_priv;
1313 spin_lock (&lp->lock);
1315 wait_cmd(dev,lp,100,"i596 interrupt, timeout");
1316 status = lp->scb.status;
1318 DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt, IRQ %d, status %4.4x.\n",
1319 dev->name, irq, status));
1321 ack_cmd = status & 0xf000;
1323 if ((status & 0x8000) || (status & 0x2000)) {
1324 struct i596_cmd *ptr;
1326 handled = 1;
1327 if ((status & 0x8000))
1328 DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt completed command.\n", dev->name));
1329 if ((status & 0x2000))
1330 DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt command unit inactive %x.\n", dev->name, status & 0x0700));
1332 while ((lp->cmd_head != I596_NULL) && (lp->cmd_head->status & STAT_C)) {
1333 ptr = lp->cmd_head;
1335 DEB(DEB_STATUS,printk(KERN_DEBUG "cmd_head->status = %04x, ->command = %04x\n",
1336 lp->cmd_head->status, lp->cmd_head->command));
1337 lp->cmd_head = ptr->v_next;
1338 lp->cmd_backlog--;
1340 switch ((ptr->command) & 0x7) {
1341 case CmdTx:
1343 struct tx_cmd *tx_cmd = (struct tx_cmd *) ptr;
1344 struct sk_buff *skb = tx_cmd->skb;
1346 if ((ptr->status) & STAT_OK) {
1347 DEB(DEB_TXADDR,print_eth(skb->data, "tx-done"));
1348 } else {
1349 dev->stats.tx_errors++;
1350 if ((ptr->status) & 0x0020)
1351 dev->stats.collisions++;
1352 if (!((ptr->status) & 0x0040))
1353 dev->stats.tx_heartbeat_errors++;
1354 if ((ptr->status) & 0x0400)
1355 dev->stats.tx_carrier_errors++;
1356 if ((ptr->status) & 0x0800)
1357 dev->stats.collisions++;
1358 if ((ptr->status) & 0x1000)
1359 dev->stats.tx_aborted_errors++;
1362 dev_kfree_skb_irq(skb);
1364 tx_cmd->cmd.command = 0; /* Mark free */
1365 break;
1367 case CmdTDR:
1369 unsigned short status = ((struct tdr_cmd *)ptr)->status;
1371 if (status & 0x8000) {
1372 DEB(DEB_TDR,printk(KERN_INFO "%s: link ok.\n", dev->name));
1373 } else {
1374 if (status & 0x4000)
1375 printk(KERN_ERR "%s: Transceiver problem.\n", dev->name);
1376 if (status & 0x2000)
1377 printk(KERN_ERR "%s: Termination problem.\n", dev->name);
1378 if (status & 0x1000)
1379 printk(KERN_ERR "%s: Short circuit.\n", dev->name);
1381 DEB(DEB_TDR,printk(KERN_INFO "%s: Time %d.\n", dev->name, status & 0x07ff));
1383 break;
1385 case CmdConfigure:
1386 case CmdMulticastList:
1387 /* Zap command so set_multicast_list() knows it is free */
1388 ptr->command = 0;
1389 break;
1391 ptr->v_next = ptr->b_next = I596_NULL;
1392 lp->last_cmd = jiffies;
1395 ptr = lp->cmd_head;
1396 while ((ptr != I596_NULL) && (ptr != lp->cmd_tail)) {
1397 ptr->command &= 0x1fff;
1398 ptr = ptr->v_next;
1401 if ((lp->cmd_head != I596_NULL))
1402 ack_cmd |= CUC_START;
1403 lp->scb.cmd = WSWAPcmd(virt_to_bus(&lp->cmd_head->status));
1405 if ((status & 0x1000) || (status & 0x4000)) {
1406 if ((status & 0x4000))
1407 DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt received a frame.\n", dev->name));
1408 i596_rx(dev);
1409 /* Only RX_START if stopped - RGH 07-07-96 */
1410 if (status & 0x1000) {
1411 if (netif_running(dev)) {
1412 DEB(DEB_ERRORS,printk(KERN_ERR "%s: i596 interrupt receive unit inactive, status 0x%x\n", dev->name, status));
1413 ack_cmd |= RX_START;
1414 dev->stats.rx_errors++;
1415 dev->stats.rx_fifo_errors++;
1416 rebuild_rx_bufs(dev);
1420 wait_cmd(dev,lp,100,"i596 interrupt, timeout");
1421 lp->scb.command = ack_cmd;
1423 #ifdef ENABLE_MVME16x_NET
1424 if (MACH_IS_MVME16x) {
1425 /* Ack the interrupt */
1427 volatile unsigned char *pcc2 = (unsigned char *) 0xfff42000;
1429 pcc2[0x2a] |= 0x08;
1431 #endif
1432 #ifdef ENABLE_BVME6000_NET
1433 if (MACH_IS_BVME6000) {
1434 volatile unsigned char *ethirq = (unsigned char *) BVME_ETHIRQ_REG;
1436 *ethirq = 1;
1437 *ethirq = 3;
1439 #endif
1440 #ifdef ENABLE_APRICOT
1441 (void) inb(ioaddr + 0x10);
1442 outb(4, ioaddr + 0xf);
1443 #endif
1444 CA(dev);
1446 DEB(DEB_INTS,printk(KERN_DEBUG "%s: exiting interrupt.\n", dev->name));
1448 spin_unlock (&lp->lock);
1449 return IRQ_RETVAL(handled);
1452 static int i596_close(struct net_device *dev)
1454 struct i596_private *lp = dev->ml_priv;
1455 unsigned long flags;
1457 netif_stop_queue(dev);
1459 DEB(DEB_INIT,printk(KERN_DEBUG "%s: Shutting down ethercard, status was %4.4x.\n",
1460 dev->name, lp->scb.status));
1462 spin_lock_irqsave(&lp->lock, flags);
1464 wait_cmd(dev,lp,100,"close1 timed out");
1465 lp->scb.command = CUC_ABORT | RX_ABORT;
1466 CA(dev);
1468 wait_cmd(dev,lp,100,"close2 timed out");
1470 spin_unlock_irqrestore(&lp->lock, flags);
1471 DEB(DEB_STRUCT,i596_display_data(dev));
1472 i596_cleanup_cmd(dev,lp);
1474 #ifdef ENABLE_MVME16x_NET
1475 if (MACH_IS_MVME16x) {
1476 volatile unsigned char *pcc2 = (unsigned char *) 0xfff42000;
1478 /* Disable all ints */
1479 pcc2[0x28] = 1;
1480 pcc2[0x2a] = 0x40;
1481 pcc2[0x2b] = 0x40; /* Set snooping bits now! */
1483 #endif
1484 #ifdef ENABLE_BVME6000_NET
1485 if (MACH_IS_BVME6000) {
1486 volatile unsigned char *ethirq = (unsigned char *) BVME_ETHIRQ_REG;
1488 *ethirq = 1;
1490 #endif
1492 free_irq(dev->irq, dev);
1493 remove_rx_bufs(dev);
1495 return 0;
1499 * Set or clear the multicast filter for this adaptor.
1502 static void set_multicast_list(struct net_device *dev)
1504 struct i596_private *lp = dev->ml_priv;
1505 int config = 0, cnt;
1507 DEB(DEB_MULTI,printk(KERN_DEBUG "%s: set multicast list, %d entries, promisc %s, allmulti %s\n",
1508 dev->name, dev->mc_count,
1509 dev->flags & IFF_PROMISC ? "ON" : "OFF",
1510 dev->flags & IFF_ALLMULTI ? "ON" : "OFF"));
1512 if (wait_cfg(dev, &lp->cf_cmd.cmd, 1000, "config change request timed out"))
1513 return;
1515 if ((dev->flags & IFF_PROMISC) && !(lp->cf_cmd.i596_config[8] & 0x01)) {
1516 lp->cf_cmd.i596_config[8] |= 0x01;
1517 config = 1;
1519 if (!(dev->flags & IFF_PROMISC) && (lp->cf_cmd.i596_config[8] & 0x01)) {
1520 lp->cf_cmd.i596_config[8] &= ~0x01;
1521 config = 1;
1523 if ((dev->flags & IFF_ALLMULTI) && (lp->cf_cmd.i596_config[11] & 0x20)) {
1524 lp->cf_cmd.i596_config[11] &= ~0x20;
1525 config = 1;
1527 if (!(dev->flags & IFF_ALLMULTI) && !(lp->cf_cmd.i596_config[11] & 0x20)) {
1528 lp->cf_cmd.i596_config[11] |= 0x20;
1529 config = 1;
1531 if (config) {
1532 lp->cf_cmd.cmd.command = CmdConfigure;
1533 i596_add_cmd(dev, &lp->cf_cmd.cmd);
1536 cnt = dev->mc_count;
1537 if (cnt > MAX_MC_CNT)
1539 cnt = MAX_MC_CNT;
1540 printk(KERN_ERR "%s: Only %d multicast addresses supported",
1541 dev->name, cnt);
1544 if (dev->mc_count > 0) {
1545 struct dev_mc_list *dmi;
1546 unsigned char *cp;
1547 struct mc_cmd *cmd;
1549 if (wait_cfg(dev, &lp->mc_cmd.cmd, 1000, "multicast list change request timed out"))
1550 return;
1551 cmd = &lp->mc_cmd;
1552 cmd->cmd.command = CmdMulticastList;
1553 cmd->mc_cnt = dev->mc_count * 6;
1554 cp = cmd->mc_addrs;
1555 for (dmi = dev->mc_list; cnt && dmi != NULL; dmi = dmi->next, cnt--, cp += 6) {
1556 memcpy(cp, dmi->dmi_addr, 6);
1557 if (i596_debug > 1)
1558 DEB(DEB_MULTI,printk(KERN_INFO "%s: Adding address %pM\n",
1559 dev->name, cp));
1561 i596_add_cmd(dev, &cmd->cmd);
1565 #ifdef MODULE
1566 static struct net_device *dev_82596;
1568 #ifdef ENABLE_APRICOT
1569 module_param(irq, int, 0);
1570 MODULE_PARM_DESC(irq, "Apricot IRQ number");
1571 #endif
1573 static int debug = -1;
1574 module_param(debug, int, 0);
1575 MODULE_PARM_DESC(debug, "i82596 debug mask");
1577 int __init init_module(void)
1579 if (debug >= 0)
1580 i596_debug = debug;
1581 dev_82596 = i82596_probe(-1);
1582 if (IS_ERR(dev_82596))
1583 return PTR_ERR(dev_82596);
1584 return 0;
1587 void __exit cleanup_module(void)
1589 unregister_netdev(dev_82596);
1590 #ifdef __mc68000__
1591 /* XXX This assumes default cache mode to be IOMAP_FULL_CACHING,
1592 * XXX which may be invalid (CONFIG_060_WRITETHROUGH)
1595 kernel_set_cachemode((void *)(dev_82596->mem_start), 4096,
1596 IOMAP_FULL_CACHING);
1597 #endif
1598 free_page ((u32)(dev_82596->mem_start));
1599 #ifdef ENABLE_APRICOT
1600 /* If we don't do this, we can't re-insmod it later. */
1601 release_region(dev_82596->base_addr, I596_TOTAL_SIZE);
1602 #endif
1603 free_netdev(dev_82596);
1606 #endif /* MODULE */