drivers/gpu/drm/i915/intel_crt.c

   1 /*
   2  * Copyright © 2006-2007 Intel Corporation
   3  *
   4  * Permission is hereby granted, free of charge, to any person obtaining a
   5  * copy of this software and associated documentation files (the "Software"),
   6  * to deal in the Software without restriction, including without limitation
   7  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
   8  * and/or sell copies of the Software, and to permit persons to whom the
   9  * Software is furnished to do so, subject to the following conditions:
  10  *
  11  * The above copyright notice and this permission notice (including the next
  12  * paragraph) shall be included in all copies or substantial portions of the
  13  * Software.
  14  *
  15  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  16  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  17  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  18  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  19  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  20  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
  21  * DEALINGS IN THE SOFTWARE.
  22  *
  23  * Authors:
  24  *      Eric Anholt <eric@anholt.net>
  25  */
  26
  27 #include <linux/dmi.h>
  28 #include <linux/i2c.h>
  29 #include <linux/slab.h>
  30 #include "drmP.h"
  31 #include "drm.h"
  32 #include "drm_crtc.h"
  33 #include "drm_crtc_helper.h"
  34 #include "drm_edid.h"
  35 #include "intel_drv.h"
  36 #include "i915_drm.h"
  37 #include "i915_drv.h"
  38
  39 /* Here's the desired hotplug mode */
  40 #define ADPA_HOTPLUG_BITS (ADPA_CRT_HOTPLUG_PERIOD_128 |                \
  41                            ADPA_CRT_HOTPLUG_WARMUP_10MS |               \
  42                            ADPA_CRT_HOTPLUG_SAMPLE_4S |                 \
  43                            ADPA_CRT_HOTPLUG_VOLTAGE_50 |                \
  44                            ADPA_CRT_HOTPLUG_VOLREF_325MV |              \
  45                            ADPA_CRT_HOTPLUG_ENABLE)
  46
  47 struct intel_crt {
  48         struct intel_encoder base;
  49         bool force_hotplug_required;
  50 };
  51
  52 static struct intel_crt *intel_attached_crt(struct drm_connector *connector)
  53 {
  54         return container_of(intel_attached_encoder(connector),
  55                             struct intel_crt, base);
  56 }
  57
  58 static void pch_crt_dpms(struct drm_encoder *encoder, int mode)
  59 {
  60         struct drm_device *dev = encoder->dev;
  61         struct drm_i915_private *dev_priv = dev->dev_private;
  62         u32 temp;
  63
  64         temp = I915_READ(PCH_ADPA);
  65         temp &= ~ADPA_DAC_ENABLE;
  66
  67         switch (mode) {
  68         case DRM_MODE_DPMS_ON:
  69                 temp |= ADPA_DAC_ENABLE;
  70                 break;
  71         case DRM_MODE_DPMS_STANDBY:
  72         case DRM_MODE_DPMS_SUSPEND:
  73         case DRM_MODE_DPMS_OFF:
  74                 /* Just leave port enable cleared */
  75                 break;
  76         }
  77
  78         I915_WRITE(PCH_ADPA, temp);
  79 }
  80
  81 static void gmch_crt_dpms(struct drm_encoder *encoder, int mode)
  82 {
  83         struct drm_device *dev = encoder->dev;
  84         struct drm_i915_private *dev_priv = dev->dev_private;
  85         u32 temp;
  86
  87         temp = I915_READ(ADPA);
  88         temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
  89         temp &= ~ADPA_DAC_ENABLE;
  90
  91         switch (mode) {
  92         case DRM_MODE_DPMS_ON:
  93                 temp |= ADPA_DAC_ENABLE;
  94                 break;
  95         case DRM_MODE_DPMS_STANDBY:
  96                 temp |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE;
  97                 break;
  98         case DRM_MODE_DPMS_SUSPEND:
  99                 temp |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE;
 100                 break;
 101         case DRM_MODE_DPMS_OFF:
 102                 temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;
 103                 break;
 104         }
 105
 106         I915_WRITE(ADPA, temp);
 107 }
 108
 109 static int intel_crt_mode_valid(struct drm_connector *connector,
 110                                 struct drm_display_mode *mode)
 111 {
 112         struct drm_device *dev = connector->dev;
 113
 114         int max_clock = 0;
 115         if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
 116                 return MODE_NO_DBLESCAN;
 117
 118         if (mode->clock < 25000)
 119                 return MODE_CLOCK_LOW;
 120
 121         if (IS_GEN2(dev))
 122                 max_clock = 350000;
 123         else
 124                 max_clock = 400000;
 125         if (mode->clock > max_clock)
 126                 return MODE_CLOCK_HIGH;
 127
 128         return MODE_OK;
 129 }
 130
 131 static bool intel_crt_mode_fixup(struct drm_encoder *encoder,
 132                                  struct drm_display_mode *mode,
 133                                  struct drm_display_mode *adjusted_mode)
 134 {
 135         return true;
 136 }
 137
 138 static void intel_crt_mode_set(struct drm_encoder *encoder,
 139                                struct drm_display_mode *mode,
 140                                struct drm_display_mode *adjusted_mode)
 141 {
 142
 143         struct drm_device *dev = encoder->dev;
 144         struct drm_crtc *crtc = encoder->crtc;
 145         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 146         struct drm_i915_private *dev_priv = dev->dev_private;
 147         int dpll_md_reg;
 148         u32 adpa, dpll_md;
 149         u32 adpa_reg;
 150
 151         dpll_md_reg = DPLL_MD(intel_crtc->pipe);
 152
 153         if (HAS_PCH_SPLIT(dev))
 154                 adpa_reg = PCH_ADPA;
 155         else
 156                 adpa_reg = ADPA;
 157
 158         /*
 159          * Disable separate mode multiplier used when cloning SDVO to CRT
 160          * XXX this needs to be adjusted when we really are cloning
 161          */
 162         if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) {
 163                 dpll_md = I915_READ(dpll_md_reg);
 164                 I915_WRITE(dpll_md_reg,
 165                            dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK);
 166         }
 167
 168         adpa = ADPA_HOTPLUG_BITS;
 169         if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
 170                 adpa |= ADPA_HSYNC_ACTIVE_HIGH;
 171         if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
 172                 adpa |= ADPA_VSYNC_ACTIVE_HIGH;
 173
 174         /* For CPT allow 3 pipe config, for others just use A or B */
 175         if (HAS_PCH_CPT(dev))
 176                 adpa |= PORT_TRANS_SEL_CPT(intel_crtc->pipe);
 177         else if (intel_crtc->pipe == 0)
 178                 adpa |= ADPA_PIPE_A_SELECT;
 179         else
 180                 adpa |= ADPA_PIPE_B_SELECT;
 181
 182         if (!HAS_PCH_SPLIT(dev))
 183                 I915_WRITE(BCLRPAT(intel_crtc->pipe), 0);
 184
 185         I915_WRITE(adpa_reg, adpa);
 186 }
 187
 188 static bool intel_ironlake_crt_detect_hotplug(struct drm_connector *connector)
 189 {
 190         struct drm_device *dev = connector->dev;
 191         struct intel_crt *crt = intel_attached_crt(connector);
 192         struct drm_i915_private *dev_priv = dev->dev_private;
 193         u32 adpa;
 194         bool ret;
 195
 196         /* The first time through, trigger an explicit detection cycle */
 197         if (crt->force_hotplug_required) {
 198                 bool turn_off_dac = HAS_PCH_SPLIT(dev);
 199                 u32 save_adpa;
 200
 201                 crt->force_hotplug_required = 0;
 202
 203                 save_adpa = adpa = I915_READ(PCH_ADPA);
 204                 DRM_DEBUG_KMS("trigger hotplug detect cycle: adpa=0x%x\n", adpa);
 205
 206                 adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER;
 207                 if (turn_off_dac)
 208                         adpa &= ~ADPA_DAC_ENABLE;
 209
 210                 I915_WRITE(PCH_ADPA, adpa);
 211
 212                 if (wait_for((I915_READ(PCH_ADPA) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0,
 213                              1000))
 214                         DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");
 215
 216                 if (turn_off_dac) {
 217                         I915_WRITE(PCH_ADPA, save_adpa);
 218                         POSTING_READ(PCH_ADPA);
 219                 }
 220         }
 221
 222         /* Check the status to see if both blue and green are on now */
 223         adpa = I915_READ(PCH_ADPA);
 224         if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0)
 225                 ret = true;
 226         else
 227                 ret = false;
 228         DRM_DEBUG_KMS("ironlake hotplug adpa=0x%x, result %d\n", adpa, ret);
 229
 230         return ret;
 231 }
 232
 233 /**
 234  * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect CRT presence.
 235  *
 236  * Not for i915G/i915GM
 237  *
 238  * \return true if CRT is connected.
 239  * \return false if CRT is disconnected.
 240  */
 241 static bool intel_crt_detect_hotplug(struct drm_connector *connector)
 242 {
 243         struct drm_device *dev = connector->dev;
 244         struct drm_i915_private *dev_priv = dev->dev_private;
 245         u32 hotplug_en, orig, stat;
 246         bool ret = false;
 247         int i, tries = 0;
 248
 249         if (HAS_PCH_SPLIT(dev))
 250                 return intel_ironlake_crt_detect_hotplug(connector);
 251
 252         /*
 253          * On 4 series desktop, CRT detect sequence need to be done twice
 254          * to get a reliable result.
 255          */
 256
 257         if (IS_G4X(dev) && !IS_GM45(dev))
 258                 tries = 2;
 259         else
 260                 tries = 1;
 261         hotplug_en = orig = I915_READ(PORT_HOTPLUG_EN);
 262         hotplug_en |= CRT_HOTPLUG_FORCE_DETECT;
 263
 264         for (i = 0; i < tries ; i++) {
 265                 /* turn on the FORCE_DETECT */
 266                 I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
 267                 /* wait for FORCE_DETECT to go off */
 268                 if (wait_for((I915_READ(PORT_HOTPLUG_EN) &
 269                               CRT_HOTPLUG_FORCE_DETECT) == 0,
 270                              1000))
 271                         DRM_DEBUG_KMS("timed out waiting for FORCE_DETECT to go off");
 272         }
 273
 274         stat = I915_READ(PORT_HOTPLUG_STAT);
 275         if ((stat & CRT_HOTPLUG_MONITOR_MASK) != CRT_HOTPLUG_MONITOR_NONE)
 276                 ret = true;
 277
 278         /* clear the interrupt we just generated, if any */
 279         I915_WRITE(PORT_HOTPLUG_STAT, CRT_HOTPLUG_INT_STATUS);
 280
 281         /* and put the bits back */
 282         I915_WRITE(PORT_HOTPLUG_EN, orig);
 283
 284         return ret;
 285 }
 286
 287 static bool intel_crt_detect_ddc(struct drm_connector *connector)
 288 {
 289         struct intel_crt *crt = intel_attached_crt(connector);
 290         struct drm_i915_private *dev_priv = crt->base.base.dev->dev_private;
 291
 292         /* CRT should always be at 0, but check anyway */
 293         if (crt->base.type != INTEL_OUTPUT_ANALOG)
 294                 return false;
 295
 296         if (intel_ddc_probe(&crt->base, dev_priv->crt_ddc_pin)) {
 297                 struct edid *edid;
 298                 bool is_digital = false;
 299                 struct i2c_adapter *i2c;
 300
 301                 i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->crt_ddc_pin);
 302                 edid = drm_get_edid(connector, i2c);
 303                 /*
 304                  * This may be a DVI-I connector with a shared DDC
 305                  * link between analog and digital outputs, so we
 306                  * have to check the EDID input spec of the attached device.
 307                  *
 308                  * On the other hand, what should we do if it is a broken EDID?
 309                  */
 310                 if (edid != NULL) {
 311                         is_digital = edid->input & DRM_EDID_INPUT_DIGITAL;
 312                         connector->display_info.raw_edid = NULL;
 313                         kfree(edid);
 314                 }
 315
 316                 if (!is_digital) {
 317                         DRM_DEBUG_KMS("CRT detected via DDC:0x50 [EDID]\n");
 318                         return true;
 319                 } else {
 320                         DRM_DEBUG_KMS("CRT not detected via DDC:0x50 [EDID reports a digital panel]\n");
 321                 }
 322         }
 323
 324         return false;
 325 }
 326
 327 static enum drm_connector_status
 328 intel_crt_load_detect(struct intel_crt *crt)
 329 {
 330         struct drm_device *dev = crt->base.base.dev;
 331         struct drm_i915_private *dev_priv = dev->dev_private;
 332         uint32_t pipe = to_intel_crtc(crt->base.base.crtc)->pipe;
 333         uint32_t save_bclrpat;
 334         uint32_t save_vtotal;
 335         uint32_t vtotal, vactive;
 336         uint32_t vsample;
 337         uint32_t vblank, vblank_start, vblank_end;
 338         uint32_t dsl;
 339         uint32_t bclrpat_reg;
 340         uint32_t vtotal_reg;
 341         uint32_t vblank_reg;
 342         uint32_t vsync_reg;
 343         uint32_t pipeconf_reg;
 344         uint32_t pipe_dsl_reg;
 345         uint8_t st00;
 346         enum drm_connector_status status;
 347
 348         DRM_DEBUG_KMS("starting load-detect on CRT\n");
 349
 350         bclrpat_reg = BCLRPAT(pipe);
 351         vtotal_reg = VTOTAL(pipe);
 352         vblank_reg = VBLANK(pipe);
 353         vsync_reg = VSYNC(pipe);
 354         pipeconf_reg = PIPECONF(pipe);
 355         pipe_dsl_reg = PIPEDSL(pipe);
 356
 357         save_bclrpat = I915_READ(bclrpat_reg);
 358         save_vtotal = I915_READ(vtotal_reg);
 359         vblank = I915_READ(vblank_reg);
 360
 361         vtotal = ((save_vtotal >> 16) & 0xfff) + 1;
 362         vactive = (save_vtotal & 0x7ff) + 1;
 363
 364         vblank_start = (vblank & 0xfff) + 1;
 365         vblank_end = ((vblank >> 16) & 0xfff) + 1;
 366
 367         /* Set the border color to purple. */
 368         I915_WRITE(bclrpat_reg, 0x500050);
 369
 370         if (!IS_GEN2(dev)) {
 371                 uint32_t pipeconf = I915_READ(pipeconf_reg);
 372                 I915_WRITE(pipeconf_reg, pipeconf | PIPECONF_FORCE_BORDER);
 373                 POSTING_READ(pipeconf_reg);
 374                 /* Wait for next Vblank to substitue
 375                  * border color for Color info */
 376                 intel_wait_for_vblank(dev, pipe);
 377                 st00 = I915_READ8(VGA_MSR_WRITE);
 378                 status = ((st00 & (1 << 4)) != 0) ?
 379                         connector_status_connected :
 380                         connector_status_disconnected;
 381
 382                 I915_WRITE(pipeconf_reg, pipeconf);
 383         } else {
 384                 bool restore_vblank = false;
 385                 int count, detect;
 386
 387                 /*
 388                 * If there isn't any border, add some.
 389                 * Yes, this will flicker
 390                 */
 391                 if (vblank_start <= vactive && vblank_end >= vtotal) {
 392                         uint32_t vsync = I915_READ(vsync_reg);
 393                         uint32_t vsync_start = (vsync & 0xffff) + 1;
 394
 395                         vblank_start = vsync_start;
 396                         I915_WRITE(vblank_reg,
 397                                    (vblank_start - 1) |
 398                                    ((vblank_end - 1) << 16));
 399                         restore_vblank = true;
 400                 }
 401                 /* sample in the vertical border, selecting the larger one */
 402                 if (vblank_start - vactive >= vtotal - vblank_end)
 403                         vsample = (vblank_start + vactive) >> 1;
 404                 else
 405                         vsample = (vtotal + vblank_end) >> 1;
 406
 407                 /*
 408                  * Wait for the border to be displayed
 409                  */
 410                 while (I915_READ(pipe_dsl_reg) >= vactive)
 411                         ;
 412                 while ((dsl = I915_READ(pipe_dsl_reg)) <= vsample)
 413                         ;
 414                 /*
 415                  * Watch ST00 for an entire scanline
 416                  */
 417                 detect = 0;
 418                 count = 0;
 419                 do {
 420                         count++;
 421                         /* Read the ST00 VGA status register */
 422                         st00 = I915_READ8(VGA_MSR_WRITE);
 423                         if (st00 & (1 << 4))
 424                                 detect++;
 425                 } while ((I915_READ(pipe_dsl_reg) == dsl));
 426
 427                 /* restore vblank if necessary */
 428                 if (restore_vblank)
 429                         I915_WRITE(vblank_reg, vblank);
 430                 /*
 431                  * If more than 3/4 of the scanline detected a monitor,
 432                  * then it is assumed to be present. This works even on i830,
 433                  * where there isn't any way to force the border color across
 434                  * the screen
 435                  */
 436                 status = detect * 4 > count * 3 ?
 437                          connector_status_connected :
 438                          connector_status_disconnected;
 439         }
 440
 441         /* Restore previous settings */
 442         I915_WRITE(bclrpat_reg, save_bclrpat);
 443
 444         return status;
 445 }
 446
 447 static enum drm_connector_status
 448 intel_crt_detect(struct drm_connector *connector, bool force)
 449 {
 450         struct drm_device *dev = connector->dev;
 451         struct intel_crt *crt = intel_attached_crt(connector);
 452         struct drm_crtc *crtc;
 453         enum drm_connector_status status;
 454
 455         if (I915_HAS_HOTPLUG(dev)) {
 456                 if (intel_crt_detect_hotplug(connector)) {
 457                         DRM_DEBUG_KMS("CRT detected via hotplug\n");
 458                         return connector_status_connected;
 459                 } else {
 460                         DRM_DEBUG_KMS("CRT not detected via hotplug\n");
 461                         return connector_status_disconnected;
 462                 }
 463         }
 464
 465         if (intel_crt_detect_ddc(connector))
 466                 return connector_status_connected;
 467
 468         if (!force)
 469                 return connector->status;
 470
 471         /* for pre-945g platforms use load detect */
 472         crtc = crt->base.base.crtc;
 473         if (crtc && crtc->enabled) {
 474                 status = intel_crt_load_detect(crt);
 475         } else {
 476                 struct intel_load_detect_pipe tmp;
 477
 478                 if (intel_get_load_detect_pipe(&crt->base, connector, NULL,
 479                                                &tmp)) {
 480                         if (intel_crt_detect_ddc(connector))
 481                                 status = connector_status_connected;
 482                         else
 483                                 status = intel_crt_load_detect(crt);
 484                         intel_release_load_detect_pipe(&crt->base, connector,
 485                                                        &tmp);
 486                 } else
 487                         status = connector_status_unknown;
 488         }
 489
 490         return status;
 491 }
 492
 493 static void intel_crt_destroy(struct drm_connector *connector)
 494 {
 495         drm_sysfs_connector_remove(connector);
 496         drm_connector_cleanup(connector);
 497         kfree(connector);
 498 }
 499
 500 static int intel_crt_get_modes(struct drm_connector *connector)
 501 {
 502         struct drm_device *dev = connector->dev;
 503         struct drm_i915_private *dev_priv = dev->dev_private;
 504         int ret;
 505         struct i2c_adapter *i2c;
 506
 507         i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->crt_ddc_pin);
 508         ret = intel_ddc_get_modes(connector, i2c);
 509         if (ret || !IS_G4X(dev))
 510                 return ret;
 511
 512         /* Try to probe digital port for output in DVI-I -> VGA mode. */
 513         i2c = intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPB);
 514         return intel_ddc_get_modes(connector, i2c);
 515 }
 516
 517 static int intel_crt_set_property(struct drm_connector *connector,
 518                                   struct drm_property *property,
 519                                   uint64_t value)
 520 {
 521         return 0;
 522 }
 523
 524 static void intel_crt_reset(struct drm_connector *connector)
 525 {
 526         struct drm_device *dev = connector->dev;
 527         struct intel_crt *crt = intel_attached_crt(connector);
 528
 529         if (HAS_PCH_SPLIT(dev))
 530                 crt->force_hotplug_required = 1;
 531 }
 532
 533 /*
 534  * Routines for controlling stuff on the analog port
 535  */
 536
 537 static const struct drm_encoder_helper_funcs pch_encoder_funcs = {
 538         .mode_fixup = intel_crt_mode_fixup,
 539         .prepare = intel_encoder_prepare,
 540         .commit = intel_encoder_commit,
 541         .mode_set = intel_crt_mode_set,
 542         .dpms = pch_crt_dpms,
 543 };
 544
 545 static const struct drm_encoder_helper_funcs gmch_encoder_funcs = {
 546         .mode_fixup = intel_crt_mode_fixup,
 547         .prepare = intel_encoder_prepare,
 548         .commit = intel_encoder_commit,
 549         .mode_set = intel_crt_mode_set,
 550         .dpms = gmch_crt_dpms,
 551 };
 552
 553 static const struct drm_connector_funcs intel_crt_connector_funcs = {
 554         .reset = intel_crt_reset,
 555         .dpms = drm_helper_connector_dpms,
 556         .detect = intel_crt_detect,
 557         .fill_modes = drm_helper_probe_single_connector_modes,
 558         .destroy = intel_crt_destroy,
 559         .set_property = intel_crt_set_property,
 560 };
 561
 562 static const struct drm_connector_helper_funcs intel_crt_connector_helper_funcs = {
 563         .mode_valid = intel_crt_mode_valid,
 564         .get_modes = intel_crt_get_modes,
 565         .best_encoder = intel_best_encoder,
 566 };
 567
 568 static const struct drm_encoder_funcs intel_crt_enc_funcs = {
 569         .destroy = intel_encoder_destroy,
 570 };
 571
 572 static int __init intel_no_crt_dmi_callback(const struct dmi_system_id *id)
 573 {
 574         DRM_INFO("Skipping CRT initialization for %s\n", id->ident);
 575         return 1;
 576 }
 577
 578 static const struct dmi_system_id intel_no_crt[] = {
 579         {
 580                 .callback = intel_no_crt_dmi_callback,
 581                 .ident = "ACER ZGB",
 582                 .matches = {
 583                         DMI_MATCH(DMI_SYS_VENDOR, "ACER"),
 584                         DMI_MATCH(DMI_PRODUCT_NAME, "ZGB"),
 585                 },
 586         },
 587         { }
 588 };
 589
 590 void intel_crt_init(struct drm_device *dev)
 591 {
 592         struct drm_connector *connector;
 593         struct intel_crt *crt;
 594         struct intel_connector *intel_connector;
 595         struct drm_i915_private *dev_priv = dev->dev_private;
 596         const struct drm_encoder_helper_funcs *encoder_helper_funcs;
 597
 598         /* Skip machines without VGA that falsely report hotplug events */
 599         if (dmi_check_system(intel_no_crt))
 600                 return;
 601
 602         crt = kzalloc(sizeof(struct intel_crt), GFP_KERNEL);
 603         if (!crt)
 604                 return;
 605
 606         intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
 607         if (!intel_connector) {
 608                 kfree(crt);
 609                 return;
 610         }
 611
 612         connector = &intel_connector->base;
 613         drm_connector_init(dev, &intel_connector->base,
 614                            &intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
 615
 616         drm_encoder_init(dev, &crt->base.base, &intel_crt_enc_funcs,
 617                          DRM_MODE_ENCODER_DAC);
 618
 619         intel_connector_attach_encoder(intel_connector, &crt->base);
 620
 621         crt->base.type = INTEL_OUTPUT_ANALOG;
 622         crt->base.clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT |
 623                                 1 << INTEL_ANALOG_CLONE_BIT |
 624                                 1 << INTEL_SDVO_LVDS_CLONE_BIT);
 625         crt->base.crtc_mask = (1 << 0) | (1 << 1);
 626         if (IS_GEN2(dev))
 627                 connector->interlace_allowed = 0;
 628         else
 629                 connector->interlace_allowed = 1;
 630         connector->doublescan_allowed = 0;
 631
 632         if (HAS_PCH_SPLIT(dev))
 633                 encoder_helper_funcs = &pch_encoder_funcs;
 634         else
 635                 encoder_helper_funcs = &gmch_encoder_funcs;
 636
 637         drm_encoder_helper_add(&crt->base.base, encoder_helper_funcs);
 638         drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
 639
 640         drm_sysfs_connector_add(connector);
 641
 642         if (I915_HAS_HOTPLUG(dev))
 643                 connector->polled = DRM_CONNECTOR_POLL_HPD;
 644         else
 645                 connector->polled = DRM_CONNECTOR_POLL_CONNECT;
 646
 647         /*
 648          * Configure the automatic hotplug detection stuff
 649          */
 650         crt->force_hotplug_required = 0;
 651         if (HAS_PCH_SPLIT(dev)) {
 652                 u32 adpa;
 653
 654                 adpa = I915_READ(PCH_ADPA);
 655                 adpa &= ~ADPA_CRT_HOTPLUG_MASK;
 656                 adpa |= ADPA_HOTPLUG_BITS;
 657                 I915_WRITE(PCH_ADPA, adpa);
 658                 POSTING_READ(PCH_ADPA);
 659
 660                 DRM_DEBUG_KMS("pch crt adpa set to 0x%x\n", adpa);
 661                 crt->force_hotplug_required = 1;
 662         }
 663
 664         dev_priv->hotplug_supported_mask |= CRT_HOTPLUG_INT_STATUS;
 665 }