2 * lis3lv02d.h - ST LIS3LV02DL accelerometer driver
4 * Copyright (C) 2007-2008 Yan Burman
5 * Copyright (C) 2008-2009 Eric Piel
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
21 #include <linux/platform_device.h>
22 #include <linux/input-polldev.h>
25 * This driver tries to support the "digital" accelerometer chips from
26 * STMicroelectronics such as LIS3LV02DL, LIS302DL, LIS3L02DQ, LIS331DL,
27 * LIS35DE, or LIS202DL. They are very similar in terms of programming, with
28 * almost the same registers. In addition to differing on physical properties,
29 * they differ on the number of axes (2/3), precision (8/12 bits), and special
30 * features (freefall detection, click...). Unfortunately, not all the
31 * differences can be probed via a register.
32 * They can be connected either via I²C or SPI.
35 #include <linux/lis3lv02d.h>
48 HP_FILTER_RESET
= 0x23,
65 FF_WU_DURATION_1
= 0x33,
69 FF_WU_DURATION_2
= 0x37,
74 CLICK_TIMELIMIT
= 0x3D,
85 FF_WU_DURATION
= 0x36,
96 WAI_12B
= 0x3A, /* 12 bits: LIS3LV02D[LQ]... */
97 WAI_8B
= 0x3B, /* 8 bits: LIS[23]02D[LQ]... */
98 WAI_6B
= 0x52, /* 6 bits: LIS331DLF - not supported */
101 enum lis3lv02d_ctrl1_12b
{
112 /* Delta to ctrl1_12b version */
113 enum lis3lv02d_ctrl1_8b
{
121 enum lis3lv02d_ctrl2
{
128 CTRL2_BDU
= 0x40, /* Block Data Update */
129 CTRL2_FS
= 0x80, /* Full Scale selection */
137 enum lis3lv02d_ctrl3
{
146 enum lis3lv02d_status_reg
{
157 enum lis3lv02d_ff_wu_cfg
{
158 FF_WU_CFG_XLIE
= 0x01,
159 FF_WU_CFG_XHIE
= 0x02,
160 FF_WU_CFG_YLIE
= 0x04,
161 FF_WU_CFG_YHIE
= 0x08,
162 FF_WU_CFG_ZLIE
= 0x10,
163 FF_WU_CFG_ZHIE
= 0x20,
164 FF_WU_CFG_LIR
= 0x40,
165 FF_WU_CFG_AOI
= 0x80,
168 enum lis3lv02d_ff_wu_src
{
178 enum lis3lv02d_dd_cfg
{
189 enum lis3lv02d_dd_src
{
199 struct axis_conversion
{
206 void *bus_priv
; /* used by the bus layer only */
207 int (*init
) (struct lis3lv02d
*lis3
);
208 int (*write
) (struct lis3lv02d
*lis3
, int reg
, u8 val
);
209 int (*read
) (struct lis3lv02d
*lis3
, int reg
, u8
*ret
);
211 int *odrs
; /* Supported output data rates */
212 u8 odr_mask
; /* ODR bit mask */
213 u8 whoami
; /* indicates measurement precision */
214 s16 (*read_data
) (struct lis3lv02d
*lis3
, int reg
);
218 * relationship between 1 LBS and mG
219 * (1/1000th of earth gravity)
222 struct input_polled_dev
*idev
; /* input device */
223 struct platform_device
*pdev
; /* platform device */
224 atomic_t count
; /* interrupt count after last read */
225 struct axis_conversion ac
; /* hw -> logical axis */
227 u32 irq
; /* IRQ number */
228 struct fasync_struct
*async_queue
; /* queue for the misc device */
229 wait_queue_head_t misc_wait
; /* Wait queue for the misc device */
230 unsigned long misc_opened
; /* bit0: whether the device is open */
232 struct lis3lv02d_platform_data
*pdata
; /* for passing board config */
233 struct mutex mutex
; /* Serialize poll and selftest */
236 int lis3lv02d_init_device(struct lis3lv02d
*lis3
);
237 int lis3lv02d_joystick_enable(void);
238 void lis3lv02d_joystick_disable(void);
239 void lis3lv02d_poweroff(struct lis3lv02d
*lis3
);
240 void lis3lv02d_poweron(struct lis3lv02d
*lis3
);
241 int lis3lv02d_remove_fs(struct lis3lv02d
*lis3
);
243 extern struct lis3lv02d lis3_dev
;