drivers/regulator/ab8500.c

   1 /*
   2  * Copyright (C) ST-Ericsson SA 2010
   3  *
   4  * License Terms: GNU General Public License v2
   5  *
   6  * Author: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
   7  *
   8  * AB8500 peripheral regulators
   9  *
  10  * AB8500 supports the following regulators,
  11  * LDOs - VAUDIO, VANAMIC2/2, VDIGMIC, VINTCORE12, VTVOUT,
  12  *        VAUX1/2/3, VANA
  13  *
  14  * for DB8500 cut 1.0 and previous versions of the silicon, all accesses
  15  * to registers are through the DB8500 SPI. In cut 1.1 onwards, these
  16  * accesses are through the DB8500 PRCMU I2C
  17  *
  18  */
  19 #include <linux/init.h>
  20 #include <linux/kernel.h>
  21 #include <linux/err.h>
  22 #include <linux/platform_device.h>
  23 #include <linux/mfd/ab8500.h>
  24 #include <linux/mfd/abx500.h>
  25 #include <linux/regulator/driver.h>
  26 #include <linux/regulator/machine.h>
  27 #include <linux/regulator/ab8500.h>
  28
  29 /**
  30  * struct ab8500_regulator_info - ab8500 regulator information
  31  * @desc: regulator description
  32  * @regulator_dev: regulator device
  33  * @max_uV: maximum voltage (for variable voltage supplies)
  34  * @min_uV: minimum voltage (for variable voltage supplies)
  35  * @fixed_uV: typical voltage (for fixed voltage supplies)
  36  * @update_bank: bank to control on/off
  37  * @update_reg: register to control on/off
  38  * @mask: mask to enable/disable regulator
  39  * @enable: bits to enable the regulator in normal(high power) mode
  40  * @voltage_bank: bank to control regulator voltage
  41  * @voltage_reg: register to control regulator voltage
  42  * @voltage_mask: mask to control regulator voltage
  43  * @supported_voltages: supported voltage table
  44  * @voltages_len: number of supported voltages for the regulator
  45  */
  46 struct ab8500_regulator_info {
  47         struct device           *dev;
  48         struct regulator_desc   desc;
  49         struct regulator_dev    *regulator;
  50         int max_uV;
  51         int min_uV;
  52         int fixed_uV;
  53         u8 update_bank;
  54         u8 update_reg;
  55         u8 mask;
  56         u8 enable;
  57         u8 voltage_bank;
  58         u8 voltage_reg;
  59         u8 voltage_mask;
  60         int const *supported_voltages;
  61         int voltages_len;
  62 };
  63
  64 /* voltage tables for the vauxn/vintcore supplies */
  65 static const int ldo_vauxn_voltages[] = {
  66         1100000,
  67         1200000,
  68         1300000,
  69         1400000,
  70         1500000,
  71         1800000,
  72         1850000,
  73         1900000,
  74         2500000,
  75         2650000,
  76         2700000,
  77         2750000,
  78         2800000,
  79         2900000,
  80         3000000,
  81         3300000,
  82 };
  83
  84 static const int ldo_vintcore_voltages[] = {
  85         1200000,
  86         1225000,
  87         1250000,
  88         1275000,
  89         1300000,
  90         1325000,
  91         1350000,
  92 };
  93
  94 static int ab8500_regulator_enable(struct regulator_dev *rdev)
  95 {
  96         int regulator_id, ret;
  97         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
  98
  99         regulator_id = rdev_get_id(rdev);
 100         if (regulator_id >= AB8500_NUM_REGULATORS)
 101                 return -EINVAL;
 102
 103         ret = abx500_mask_and_set_register_interruptible(info->dev,
 104                 info->update_bank, info->update_reg, info->mask, info->enable);
 105         if (ret < 0)
 106                 dev_err(rdev_get_dev(rdev),
 107                         "couldn't set enable bits for regulator\n");
 108         return ret;
 109 }
 110
 111 static int ab8500_regulator_disable(struct regulator_dev *rdev)
 112 {
 113         int regulator_id, ret;
 114         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 115
 116         regulator_id = rdev_get_id(rdev);
 117         if (regulator_id >= AB8500_NUM_REGULATORS)
 118                 return -EINVAL;
 119
 120         ret = abx500_mask_and_set_register_interruptible(info->dev,
 121                 info->update_bank, info->update_reg, info->mask, 0x0);
 122         if (ret < 0)
 123                 dev_err(rdev_get_dev(rdev),
 124                         "couldn't set disable bits for regulator\n");
 125         return ret;
 126 }
 127
 128 static int ab8500_regulator_is_enabled(struct regulator_dev *rdev)
 129 {
 130         int regulator_id, ret;
 131         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 132         u8 value;
 133
 134         regulator_id = rdev_get_id(rdev);
 135         if (regulator_id >= AB8500_NUM_REGULATORS)
 136                 return -EINVAL;
 137
 138         ret = abx500_get_register_interruptible(info->dev,
 139                 info->update_bank, info->update_reg, &value);
 140         if (ret < 0) {
 141                 dev_err(rdev_get_dev(rdev),
 142                         "couldn't read 0x%x register\n", info->update_reg);
 143                 return ret;
 144         }
 145
 146         if (value & info->mask)
 147                 return true;
 148         else
 149                 return false;
 150 }
 151
 152 static int ab8500_list_voltage(struct regulator_dev *rdev, unsigned selector)
 153 {
 154         int regulator_id;
 155         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 156
 157         regulator_id = rdev_get_id(rdev);
 158         if (regulator_id >= AB8500_NUM_REGULATORS)
 159                 return -EINVAL;
 160
 161         /* return the uV for the fixed regulators */
 162         if (info->fixed_uV)
 163                 return info->fixed_uV;
 164
 165         if (selector >= info->voltages_len)
 166                 return -EINVAL;
 167
 168         return info->supported_voltages[selector];
 169 }
 170
 171 static int ab8500_regulator_get_voltage(struct regulator_dev *rdev)
 172 {
 173         int regulator_id, ret;
 174         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 175         u8 value;
 176
 177         regulator_id = rdev_get_id(rdev);
 178         if (regulator_id >= AB8500_NUM_REGULATORS)
 179                 return -EINVAL;
 180
 181         ret = abx500_get_register_interruptible(info->dev, info->voltage_bank,
 182                 info->voltage_reg, &value);
 183         if (ret < 0) {
 184                 dev_err(rdev_get_dev(rdev),
 185                         "couldn't read voltage reg for regulator\n");
 186                 return ret;
 187         }
 188
 189         /* vintcore has a different layout */
 190         value &= info->voltage_mask;
 191         if (regulator_id == AB8500_LDO_INTCORE)
 192                 ret = info->supported_voltages[value >> 0x3];
 193         else
 194                 ret = info->supported_voltages[value];
 195
 196         return ret;
 197 }
 198
 199 static int ab8500_get_best_voltage_index(struct regulator_dev *rdev,
 200                 int min_uV, int max_uV)
 201 {
 202         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 203         int i;
 204
 205         /* check the supported voltage */
 206         for (i = 0; i < info->voltages_len; i++) {
 207                 if ((info->supported_voltages[i] >= min_uV) &&
 208                     (info->supported_voltages[i] <= max_uV))
 209                         return i;
 210         }
 211
 212         return -EINVAL;
 213 }
 214
 215 static int ab8500_regulator_set_voltage(struct regulator_dev *rdev,
 216                                         int min_uV, int max_uV,
 217                                         unsigned *selector)
 218 {
 219         int regulator_id, ret;
 220         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 221
 222         regulator_id = rdev_get_id(rdev);
 223         if (regulator_id >= AB8500_NUM_REGULATORS)
 224                 return -EINVAL;
 225
 226         /* get the appropriate voltages within the range */
 227         ret = ab8500_get_best_voltage_index(rdev, min_uV, max_uV);
 228         if (ret < 0) {
 229                 dev_err(rdev_get_dev(rdev),
 230                                 "couldn't get best voltage for regulator\n");
 231                 return ret;
 232         }
 233
 234         *selector = ret;
 235
 236         /* set the registers for the request */
 237         ret = abx500_mask_and_set_register_interruptible(info->dev,
 238                 info->voltage_bank, info->voltage_reg,
 239                 info->voltage_mask, (u8)ret);
 240         if (ret < 0)
 241                 dev_err(rdev_get_dev(rdev),
 242                 "couldn't set voltage reg for regulator\n");
 243
 244         return ret;
 245 }
 246
 247 static struct regulator_ops ab8500_regulator_ops = {
 248         .enable         = ab8500_regulator_enable,
 249         .disable        = ab8500_regulator_disable,
 250         .is_enabled     = ab8500_regulator_is_enabled,
 251         .get_voltage    = ab8500_regulator_get_voltage,
 252         .set_voltage    = ab8500_regulator_set_voltage,
 253         .list_voltage   = ab8500_list_voltage,
 254 };
 255
 256 static int ab8500_fixed_get_voltage(struct regulator_dev *rdev)
 257 {
 258         int regulator_id;
 259         struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 260
 261         regulator_id = rdev_get_id(rdev);
 262         if (regulator_id >= AB8500_NUM_REGULATORS)
 263                 return -EINVAL;
 264
 265         return info->fixed_uV;
 266 }
 267
 268 static struct regulator_ops ab8500_ldo_fixed_ops = {
 269         .enable         = ab8500_regulator_enable,
 270         .disable        = ab8500_regulator_disable,
 271         .is_enabled     = ab8500_regulator_is_enabled,
 272         .get_voltage    = ab8500_fixed_get_voltage,
 273         .list_voltage   = ab8500_list_voltage,
 274 };
 275
 276 #define AB8500_LDO(_id, min, max, bank, reg, reg_mask,          \
 277                 reg_enable, volt_bank, volt_reg, volt_mask,     \
 278                 voltages, len_volts)                            \
 279 {                                                               \
 280         .desc   = {                                             \
 281                 .name   = "LDO-" #_id,                          \
 282                 .ops    = &ab8500_regulator_ops,                \
 283                 .type   = REGULATOR_VOLTAGE,                    \
 284                 .id     = AB8500_LDO_##_id,                     \
 285                 .owner  = THIS_MODULE,                          \
 286         },                                                      \
 287         .min_uV         = (min) * 1000,                         \
 288         .max_uV         = (max) * 1000,                         \
 289         .update_bank    = bank,                                 \
 290         .update_reg     = reg,                                  \
 291         .mask           = reg_mask,                             \
 292         .enable         = reg_enable,                           \
 293         .voltage_bank   = volt_bank,                            \
 294         .voltage_reg    = volt_reg,                             \
 295         .voltage_mask   = volt_mask,                            \
 296         .supported_voltages = voltages,                         \
 297         .voltages_len   = len_volts,                            \
 298         .fixed_uV       = 0,                                    \
 299 }
 300
 301 #define AB8500_FIXED_LDO(_id, fixed, bank, reg,         \
 302                         reg_mask, reg_enable)           \
 303 {                                                       \
 304         .desc   = {                                     \
 305                 .name   = "LDO-" #_id,                  \
 306                 .ops    = &ab8500_ldo_fixed_ops,        \
 307                 .type   = REGULATOR_VOLTAGE,            \
 308                 .id     = AB8500_LDO_##_id,             \
 309                 .owner  = THIS_MODULE,                  \
 310         },                                              \
 311         .fixed_uV       = fixed * 1000,                 \
 312         .update_bank    = bank,                         \
 313         .update_reg     = reg,                          \
 314         .mask           = reg_mask,                     \
 315         .enable         = reg_enable,                   \
 316 }
 317
 318 static struct ab8500_regulator_info ab8500_regulator_info[] = {
 319         /*
 320          * Variable Voltage LDOs
 321          * name, min uV, max uV, ctrl bank, ctrl reg, reg mask, enable mask,
 322          *      volt ctrl bank, volt ctrl reg, volt ctrl mask, volt table,
 323          *      num supported volts
 324          */
 325         AB8500_LDO(AUX1, 1100, 3300, 0x04, 0x09, 0x3, 0x1, 0x04, 0x1f, 0xf,
 326                         ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
 327         AB8500_LDO(AUX2, 1100, 3300, 0x04, 0x09, 0xc, 0x4, 0x04, 0x20, 0xf,
 328                         ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
 329         AB8500_LDO(AUX3, 1100, 3300, 0x04, 0x0a, 0x3, 0x1, 0x04, 0x21, 0xf,
 330                         ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
 331         AB8500_LDO(INTCORE, 1100, 3300, 0x03, 0x80, 0x44, 0x4, 0x03, 0x80, 0x38,
 332                 ldo_vintcore_voltages, ARRAY_SIZE(ldo_vintcore_voltages)),
 333
 334         /*
 335          * Fixed Voltage LDOs
 336          *               name,  o/p uV, ctrl bank, ctrl reg, enable, disable
 337          */
 338         AB8500_FIXED_LDO(TVOUT,   2000, 0x03,      0x80,     0x82,    0x2),
 339         AB8500_FIXED_LDO(AUDIO,   2000, 0x03,      0x83,     0x2,    0x2),
 340         AB8500_FIXED_LDO(ANAMIC1, 2050, 0x03,      0x83,     0x08,    0x08),
 341         AB8500_FIXED_LDO(ANAMIC2, 2050, 0x03,      0x83,     0x10,    0x10),
 342         AB8500_FIXED_LDO(DMIC,    1800, 0x03,      0x83,     0x04,   0x04),
 343         AB8500_FIXED_LDO(ANA,     1200, 0x04,      0x06,     0xc,    0x4),
 344 };
 345
 346 static __devinit int ab8500_regulator_probe(struct platform_device *pdev)
 347 {
 348         struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
 349         struct ab8500_platform_data *pdata;
 350         int i, err;
 351
 352         if (!ab8500) {
 353                 dev_err(&pdev->dev, "null mfd parent\n");
 354                 return -EINVAL;
 355         }
 356         pdata = dev_get_platdata(ab8500->dev);
 357
 358         /* make sure the platform data has the correct size */
 359         if (pdata->num_regulator != ARRAY_SIZE(ab8500_regulator_info)) {
 360                 dev_err(&pdev->dev, "platform configuration error\n");
 361                 return -EINVAL;
 362         }
 363
 364         /* register all regulators */
 365         for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
 366                 struct ab8500_regulator_info *info = NULL;
 367
 368                 /* assign per-regulator data */
 369                 info = &ab8500_regulator_info[i];
 370                 info->dev = &pdev->dev;
 371
 372                 info->regulator = regulator_register(&info->desc, &pdev->dev,
 373                                 &pdata->regulator[i], info);
 374                 if (IS_ERR(info->regulator)) {
 375                         err = PTR_ERR(info->regulator);
 376                         dev_err(&pdev->dev, "failed to register regulator %s\n",
 377                                         info->desc.name);
 378                         /* when we fail, un-register all earlier regulators */
 379                         while (--i >= 0) {
 380                                 info = &ab8500_regulator_info[i];
 381                                 regulator_unregister(info->regulator);
 382                         }
 383                         return err;
 384                 }
 385         }
 386
 387         return 0;
 388 }
 389
 390 static __devexit int ab8500_regulator_remove(struct platform_device *pdev)
 391 {
 392         int i;
 393
 394         for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
 395                 struct ab8500_regulator_info *info = NULL;
 396                 info = &ab8500_regulator_info[i];
 397                 regulator_unregister(info->regulator);
 398         }
 399
 400         return 0;
 401 }
 402
 403 static struct platform_driver ab8500_regulator_driver = {
 404         .probe = ab8500_regulator_probe,
 405         .remove = __devexit_p(ab8500_regulator_remove),
 406         .driver         = {
 407                 .name   = "ab8500-regulator",
 408                 .owner  = THIS_MODULE,
 409         },
 410 };
 411
 412 static int __init ab8500_regulator_init(void)
 413 {
 414         int ret;
 415
 416         ret = platform_driver_register(&ab8500_regulator_driver);
 417         if (ret != 0)
 418                 pr_err("Failed to register ab8500 regulator: %d\n", ret);
 419
 420         return ret;
 421 }
 422 subsys_initcall(ab8500_regulator_init);
 423
 424 static void __exit ab8500_regulator_exit(void)
 425 {
 426         platform_driver_unregister(&ab8500_regulator_driver);
 427 }
 428 module_exit(ab8500_regulator_exit);
 429
 430 MODULE_LICENSE("GPL v2");
 431 MODULE_AUTHOR("Sundar Iyer <sundar.iyer@stericsson.com>");
 432 MODULE_DESCRIPTION("Regulator Driver for ST-Ericsson AB8500 Mixed-Sig PMIC");
 433 MODULE_ALIAS("platform:ab8500-regulator");