drm/radeon/kms: move panel mode setup into encoder mode set
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / rtc / rtc-ds1374.c
blobe6e71deb188f7cc91a6512584724df883f307a27
1 /*
2 * RTC client/driver for the Maxim/Dallas DS1374 Real-Time Clock over I2C
4 * Based on code by Randy Vinson <rvinson@mvista.com>,
5 * which was based on the m41t00.c by Mark Greer <mgreer@mvista.com>.
7 * Copyright (C) 2006-2007 Freescale Semiconductor
9 * 2005 (c) MontaVista Software, Inc. This file is licensed under
10 * the terms of the GNU General Public License version 2. This program
11 * is licensed "as is" without any warranty of any kind, whether express
12 * or implied.
15 * It would be more efficient to use i2c msgs/i2c_transfer directly but, as
16 * recommened in .../Documentation/i2c/writing-clients section
17 * "Sending and receiving", using SMBus level communication is preferred.
20 #include <linux/kernel.h>
21 #include <linux/module.h>
22 #include <linux/interrupt.h>
23 #include <linux/i2c.h>
24 #include <linux/rtc.h>
25 #include <linux/bcd.h>
26 #include <linux/workqueue.h>
27 #include <linux/slab.h>
28 #include <linux/pm.h>
30 #define DS1374_REG_TOD0 0x00 /* Time of Day */
31 #define DS1374_REG_TOD1 0x01
32 #define DS1374_REG_TOD2 0x02
33 #define DS1374_REG_TOD3 0x03
34 #define DS1374_REG_WDALM0 0x04 /* Watchdog/Alarm */
35 #define DS1374_REG_WDALM1 0x05
36 #define DS1374_REG_WDALM2 0x06
37 #define DS1374_REG_CR 0x07 /* Control */
38 #define DS1374_REG_CR_AIE 0x01 /* Alarm Int. Enable */
39 #define DS1374_REG_CR_WDALM 0x20 /* 1=Watchdog, 0=Alarm */
40 #define DS1374_REG_CR_WACE 0x40 /* WD/Alarm counter enable */
41 #define DS1374_REG_SR 0x08 /* Status */
42 #define DS1374_REG_SR_OSF 0x80 /* Oscillator Stop Flag */
43 #define DS1374_REG_SR_AF 0x01 /* Alarm Flag */
44 #define DS1374_REG_TCR 0x09 /* Trickle Charge */
46 static const struct i2c_device_id ds1374_id[] = {
47 { "ds1374", 0 },
48 { }
50 MODULE_DEVICE_TABLE(i2c, ds1374_id);
52 struct ds1374 {
53 struct i2c_client *client;
54 struct rtc_device *rtc;
55 struct work_struct work;
57 /* The mutex protects alarm operations, and prevents a race
58 * between the enable_irq() in the workqueue and the free_irq()
59 * in the remove function.
61 struct mutex mutex;
62 int exiting;
65 static struct i2c_driver ds1374_driver;
67 static int ds1374_read_rtc(struct i2c_client *client, u32 *time,
68 int reg, int nbytes)
70 u8 buf[4];
71 int ret;
72 int i;
74 if (nbytes > 4) {
75 WARN_ON(1);
76 return -EINVAL;
79 ret = i2c_smbus_read_i2c_block_data(client, reg, nbytes, buf);
81 if (ret < 0)
82 return ret;
83 if (ret < nbytes)
84 return -EIO;
86 for (i = nbytes - 1, *time = 0; i >= 0; i--)
87 *time = (*time << 8) | buf[i];
89 return 0;
92 static int ds1374_write_rtc(struct i2c_client *client, u32 time,
93 int reg, int nbytes)
95 u8 buf[4];
96 int i;
98 if (nbytes > 4) {
99 WARN_ON(1);
100 return -EINVAL;
103 for (i = 0; i < nbytes; i++) {
104 buf[i] = time & 0xff;
105 time >>= 8;
108 return i2c_smbus_write_i2c_block_data(client, reg, nbytes, buf);
111 static int ds1374_check_rtc_status(struct i2c_client *client)
113 int ret = 0;
114 int control, stat;
116 stat = i2c_smbus_read_byte_data(client, DS1374_REG_SR);
117 if (stat < 0)
118 return stat;
120 if (stat & DS1374_REG_SR_OSF)
121 dev_warn(&client->dev,
122 "oscillator discontinuity flagged, "
123 "time unreliable\n");
125 stat &= ~(DS1374_REG_SR_OSF | DS1374_REG_SR_AF);
127 ret = i2c_smbus_write_byte_data(client, DS1374_REG_SR, stat);
128 if (ret < 0)
129 return ret;
131 /* If the alarm is pending, clear it before requesting
132 * the interrupt, so an interrupt event isn't reported
133 * before everything is initialized.
136 control = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
137 if (control < 0)
138 return control;
140 control &= ~(DS1374_REG_CR_WACE | DS1374_REG_CR_AIE);
141 return i2c_smbus_write_byte_data(client, DS1374_REG_CR, control);
144 static int ds1374_read_time(struct device *dev, struct rtc_time *time)
146 struct i2c_client *client = to_i2c_client(dev);
147 u32 itime;
148 int ret;
150 ret = ds1374_read_rtc(client, &itime, DS1374_REG_TOD0, 4);
151 if (!ret)
152 rtc_time_to_tm(itime, time);
154 return ret;
157 static int ds1374_set_time(struct device *dev, struct rtc_time *time)
159 struct i2c_client *client = to_i2c_client(dev);
160 unsigned long itime;
162 rtc_tm_to_time(time, &itime);
163 return ds1374_write_rtc(client, itime, DS1374_REG_TOD0, 4);
166 /* The ds1374 has a decrementer for an alarm, rather than a comparator.
167 * If the time of day is changed, then the alarm will need to be
168 * reset.
170 static int ds1374_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
172 struct i2c_client *client = to_i2c_client(dev);
173 struct ds1374 *ds1374 = i2c_get_clientdata(client);
174 u32 now, cur_alarm;
175 int cr, sr;
176 int ret = 0;
178 if (client->irq <= 0)
179 return -EINVAL;
181 mutex_lock(&ds1374->mutex);
183 cr = ret = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
184 if (ret < 0)
185 goto out;
187 sr = ret = i2c_smbus_read_byte_data(client, DS1374_REG_SR);
188 if (ret < 0)
189 goto out;
191 ret = ds1374_read_rtc(client, &now, DS1374_REG_TOD0, 4);
192 if (ret)
193 goto out;
195 ret = ds1374_read_rtc(client, &cur_alarm, DS1374_REG_WDALM0, 3);
196 if (ret)
197 goto out;
199 rtc_time_to_tm(now + cur_alarm, &alarm->time);
200 alarm->enabled = !!(cr & DS1374_REG_CR_WACE);
201 alarm->pending = !!(sr & DS1374_REG_SR_AF);
203 out:
204 mutex_unlock(&ds1374->mutex);
205 return ret;
208 static int ds1374_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
210 struct i2c_client *client = to_i2c_client(dev);
211 struct ds1374 *ds1374 = i2c_get_clientdata(client);
212 struct rtc_time now;
213 unsigned long new_alarm, itime;
214 int cr;
215 int ret = 0;
217 if (client->irq <= 0)
218 return -EINVAL;
220 ret = ds1374_read_time(dev, &now);
221 if (ret < 0)
222 return ret;
224 rtc_tm_to_time(&alarm->time, &new_alarm);
225 rtc_tm_to_time(&now, &itime);
227 /* This can happen due to races, in addition to dates that are
228 * truly in the past. To avoid requiring the caller to check for
229 * races, dates in the past are assumed to be in the recent past
230 * (i.e. not something that we'd rather the caller know about via
231 * an error), and the alarm is set to go off as soon as possible.
233 if (time_before_eq(new_alarm, itime))
234 new_alarm = 1;
235 else
236 new_alarm -= itime;
238 mutex_lock(&ds1374->mutex);
240 ret = cr = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
241 if (ret < 0)
242 goto out;
244 /* Disable any existing alarm before setting the new one
245 * (or lack thereof). */
246 cr &= ~DS1374_REG_CR_WACE;
248 ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, cr);
249 if (ret < 0)
250 goto out;
252 ret = ds1374_write_rtc(client, new_alarm, DS1374_REG_WDALM0, 3);
253 if (ret)
254 goto out;
256 if (alarm->enabled) {
257 cr |= DS1374_REG_CR_WACE | DS1374_REG_CR_AIE;
258 cr &= ~DS1374_REG_CR_WDALM;
260 ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, cr);
263 out:
264 mutex_unlock(&ds1374->mutex);
265 return ret;
268 static irqreturn_t ds1374_irq(int irq, void *dev_id)
270 struct i2c_client *client = dev_id;
271 struct ds1374 *ds1374 = i2c_get_clientdata(client);
273 disable_irq_nosync(irq);
274 schedule_work(&ds1374->work);
275 return IRQ_HANDLED;
278 static void ds1374_work(struct work_struct *work)
280 struct ds1374 *ds1374 = container_of(work, struct ds1374, work);
281 struct i2c_client *client = ds1374->client;
282 int stat, control;
284 mutex_lock(&ds1374->mutex);
286 stat = i2c_smbus_read_byte_data(client, DS1374_REG_SR);
287 if (stat < 0)
288 goto unlock;
290 if (stat & DS1374_REG_SR_AF) {
291 stat &= ~DS1374_REG_SR_AF;
292 i2c_smbus_write_byte_data(client, DS1374_REG_SR, stat);
294 control = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
295 if (control < 0)
296 goto out;
298 control &= ~(DS1374_REG_CR_WACE | DS1374_REG_CR_AIE);
299 i2c_smbus_write_byte_data(client, DS1374_REG_CR, control);
301 rtc_update_irq(ds1374->rtc, 1, RTC_AF | RTC_IRQF);
304 out:
305 if (!ds1374->exiting)
306 enable_irq(client->irq);
307 unlock:
308 mutex_unlock(&ds1374->mutex);
311 static int ds1374_alarm_irq_enable(struct device *dev, unsigned int enabled)
313 struct i2c_client *client = to_i2c_client(dev);
314 struct ds1374 *ds1374 = i2c_get_clientdata(client);
315 int ret;
317 mutex_lock(&ds1374->mutex);
319 ret = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
320 if (ret < 0)
321 goto out;
323 if (enabled) {
324 ret |= DS1374_REG_CR_WACE | DS1374_REG_CR_AIE;
325 ret &= ~DS1374_REG_CR_WDALM;
326 } else {
327 ret &= ~DS1374_REG_CR_WACE;
329 ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, ret);
331 out:
332 mutex_unlock(&ds1374->mutex);
333 return ret;
336 static const struct rtc_class_ops ds1374_rtc_ops = {
337 .read_time = ds1374_read_time,
338 .set_time = ds1374_set_time,
339 .read_alarm = ds1374_read_alarm,
340 .set_alarm = ds1374_set_alarm,
341 .alarm_irq_enable = ds1374_alarm_irq_enable,
344 static int ds1374_probe(struct i2c_client *client,
345 const struct i2c_device_id *id)
347 struct ds1374 *ds1374;
348 int ret;
350 ds1374 = kzalloc(sizeof(struct ds1374), GFP_KERNEL);
351 if (!ds1374)
352 return -ENOMEM;
354 ds1374->client = client;
355 i2c_set_clientdata(client, ds1374);
357 INIT_WORK(&ds1374->work, ds1374_work);
358 mutex_init(&ds1374->mutex);
360 ret = ds1374_check_rtc_status(client);
361 if (ret)
362 goto out_free;
364 if (client->irq > 0) {
365 ret = request_irq(client->irq, ds1374_irq, 0,
366 "ds1374", client);
367 if (ret) {
368 dev_err(&client->dev, "unable to request IRQ\n");
369 goto out_free;
372 device_set_wakeup_capable(&client->dev, 1);
375 ds1374->rtc = rtc_device_register(client->name, &client->dev,
376 &ds1374_rtc_ops, THIS_MODULE);
377 if (IS_ERR(ds1374->rtc)) {
378 ret = PTR_ERR(ds1374->rtc);
379 dev_err(&client->dev, "unable to register the class device\n");
380 goto out_irq;
383 return 0;
385 out_irq:
386 if (client->irq > 0)
387 free_irq(client->irq, client);
389 out_free:
390 kfree(ds1374);
391 return ret;
394 static int __devexit ds1374_remove(struct i2c_client *client)
396 struct ds1374 *ds1374 = i2c_get_clientdata(client);
398 if (client->irq > 0) {
399 mutex_lock(&ds1374->mutex);
400 ds1374->exiting = 1;
401 mutex_unlock(&ds1374->mutex);
403 free_irq(client->irq, client);
404 cancel_work_sync(&ds1374->work);
407 rtc_device_unregister(ds1374->rtc);
408 kfree(ds1374);
409 return 0;
412 #ifdef CONFIG_PM
413 static int ds1374_suspend(struct device *dev)
415 struct i2c_client *client = to_i2c_client(dev);
417 if (client->irq >= 0 && device_may_wakeup(&client->dev))
418 enable_irq_wake(client->irq);
419 return 0;
422 static int ds1374_resume(struct device *dev)
424 struct i2c_client *client = to_i2c_client(dev);
426 if (client->irq >= 0 && device_may_wakeup(&client->dev))
427 disable_irq_wake(client->irq);
428 return 0;
431 static SIMPLE_DEV_PM_OPS(ds1374_pm, ds1374_suspend, ds1374_resume);
433 #define DS1374_PM (&ds1374_pm)
434 #else
435 #define DS1374_PM NULL
436 #endif
438 static struct i2c_driver ds1374_driver = {
439 .driver = {
440 .name = "rtc-ds1374",
441 .owner = THIS_MODULE,
442 .pm = DS1374_PM,
444 .probe = ds1374_probe,
445 .remove = __devexit_p(ds1374_remove),
446 .id_table = ds1374_id,
449 static int __init ds1374_init(void)
451 return i2c_add_driver(&ds1374_driver);
454 static void __exit ds1374_exit(void)
456 i2c_del_driver(&ds1374_driver);
459 module_init(ds1374_init);
460 module_exit(ds1374_exit);
462 MODULE_AUTHOR("Scott Wood <scottwood@freescale.com>");
463 MODULE_DESCRIPTION("Maxim/Dallas DS1374 RTC Driver");
464 MODULE_LICENSE("GPL");