2 * Aic94xx SAS/SATA driver SCB management.
4 * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
5 * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
7 * This file is licensed under GPLv2.
9 * This file is part of the aic94xx driver.
11 * The aic94xx driver is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; version 2 of the
16 * The aic94xx driver is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
19 * General Public License for more details.
21 * You should have received a copy of the GNU General Public License
22 * along with the aic94xx driver; if not, write to the Free Software
23 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
27 #include <linux/pci.h>
28 #include <scsi/scsi_host.h>
31 #include "aic94xx_reg.h"
32 #include "aic94xx_hwi.h"
33 #include "aic94xx_seq.h"
35 #include "aic94xx_dump.h"
37 /* ---------- EMPTY SCB ---------- */
41 #define PRIMITIVE_RECVD 0x08
42 #define PHY_EVENT 0x10
43 #define LINK_RESET_ERROR 0x18
44 #define TIMER_EVENT 0x20
45 #define REQ_TASK_ABORT 0xF0
46 #define REQ_DEVICE_RESET 0xF1
47 #define SIGNAL_NCQ_ERROR 0xF2
48 #define CLEAR_NCQ_ERROR 0xF3
50 #define PHY_EVENTS_STATUS (CURRENT_LOSS_OF_SIGNAL | CURRENT_OOB_DONE \
51 | CURRENT_SPINUP_HOLD | CURRENT_GTO_TIMEOUT \
54 static inline void get_lrate_mode(struct asd_phy
*phy
, u8 oob_mode
)
56 struct sas_phy
*sas_phy
= phy
->sas_phy
.phy
;
58 switch (oob_mode
& 7) {
60 /* FIXME: sas transport class doesn't have this */
61 phy
->sas_phy
.linkrate
= SAS_LINK_RATE_6_0_GBPS
;
62 phy
->sas_phy
.phy
->negotiated_linkrate
= SAS_LINK_RATE_6_0_GBPS
;
65 phy
->sas_phy
.linkrate
= SAS_LINK_RATE_3_0_GBPS
;
66 phy
->sas_phy
.phy
->negotiated_linkrate
= SAS_LINK_RATE_3_0_GBPS
;
69 phy
->sas_phy
.linkrate
= SAS_LINK_RATE_1_5_GBPS
;
70 phy
->sas_phy
.phy
->negotiated_linkrate
= SAS_LINK_RATE_1_5_GBPS
;
73 sas_phy
->negotiated_linkrate
= phy
->sas_phy
.linkrate
;
74 sas_phy
->maximum_linkrate_hw
= SAS_LINK_RATE_3_0_GBPS
;
75 sas_phy
->minimum_linkrate_hw
= SAS_LINK_RATE_1_5_GBPS
;
76 sas_phy
->maximum_linkrate
= phy
->phy_desc
->max_sas_lrate
;
77 sas_phy
->minimum_linkrate
= phy
->phy_desc
->min_sas_lrate
;
79 if (oob_mode
& SAS_MODE
)
80 phy
->sas_phy
.oob_mode
= SAS_OOB_MODE
;
81 else if (oob_mode
& SATA_MODE
)
82 phy
->sas_phy
.oob_mode
= SATA_OOB_MODE
;
85 static inline void asd_phy_event_tasklet(struct asd_ascb
*ascb
,
86 struct done_list_struct
*dl
)
88 struct asd_ha_struct
*asd_ha
= ascb
->ha
;
89 struct sas_ha_struct
*sas_ha
= &asd_ha
->sas_ha
;
90 int phy_id
= dl
->status_block
[0] & DL_PHY_MASK
;
91 struct asd_phy
*phy
= &asd_ha
->phys
[phy_id
];
93 u8 oob_status
= dl
->status_block
[1] & PHY_EVENTS_STATUS
;
94 u8 oob_mode
= dl
->status_block
[2];
97 case CURRENT_LOSS_OF_SIGNAL
:
98 /* directly attached device was removed */
99 ASD_DPRINTK("phy%d: device unplugged\n", phy_id
);
100 asd_turn_led(asd_ha
, phy_id
, 0);
101 sas_phy_disconnected(&phy
->sas_phy
);
102 sas_ha
->notify_phy_event(&phy
->sas_phy
, PHYE_LOSS_OF_SIGNAL
);
104 case CURRENT_OOB_DONE
:
105 /* hot plugged device */
106 asd_turn_led(asd_ha
, phy_id
, 1);
107 get_lrate_mode(phy
, oob_mode
);
108 ASD_DPRINTK("phy%d device plugged: lrate:0x%x, proto:0x%x\n",
109 phy_id
, phy
->sas_phy
.linkrate
, phy
->sas_phy
.iproto
);
110 sas_ha
->notify_phy_event(&phy
->sas_phy
, PHYE_OOB_DONE
);
112 case CURRENT_SPINUP_HOLD
:
113 /* hot plug SATA, no COMWAKE sent */
114 asd_turn_led(asd_ha
, phy_id
, 1);
115 sas_ha
->notify_phy_event(&phy
->sas_phy
, PHYE_SPINUP_HOLD
);
117 case CURRENT_GTO_TIMEOUT
:
118 case CURRENT_OOB_ERROR
:
119 ASD_DPRINTK("phy%d error while OOB: oob status:0x%x\n", phy_id
,
120 dl
->status_block
[1]);
121 asd_turn_led(asd_ha
, phy_id
, 0);
122 sas_phy_disconnected(&phy
->sas_phy
);
123 sas_ha
->notify_phy_event(&phy
->sas_phy
, PHYE_OOB_ERROR
);
128 /* If phys are enabled sparsely, this will do the right thing. */
129 static inline unsigned ord_phy(struct asd_ha_struct
*asd_ha
,
132 u8 enabled_mask
= asd_ha
->hw_prof
.enabled_phys
;
135 for_each_phy(enabled_mask
, enabled_mask
, i
) {
136 if (&asd_ha
->phys
[i
] == phy
)
144 * asd_get_attached_sas_addr -- extract/generate attached SAS address
145 * phy: pointer to asd_phy
146 * sas_addr: pointer to buffer where the SAS address is to be written
148 * This function extracts the SAS address from an IDENTIFY frame
149 * received. If OOB is SATA, then a SAS address is generated from the
152 * LOCKING: the frame_rcvd_lock needs to be held since this parses the frame
155 static inline void asd_get_attached_sas_addr(struct asd_phy
*phy
, u8
*sas_addr
)
157 if (phy
->sas_phy
.frame_rcvd
[0] == 0x34
158 && phy
->sas_phy
.oob_mode
== SATA_OOB_MODE
) {
159 struct asd_ha_struct
*asd_ha
= phy
->sas_phy
.ha
->lldd_ha
;
160 /* FIS device-to-host */
161 u64 addr
= be64_to_cpu(*(__be64
*)phy
->phy_desc
->sas_addr
);
163 addr
+= asd_ha
->hw_prof
.sata_name_base
+ ord_phy(asd_ha
, phy
);
164 *(__be64
*)sas_addr
= cpu_to_be64(addr
);
166 struct sas_identify_frame
*idframe
=
167 (void *) phy
->sas_phy
.frame_rcvd
;
168 memcpy(sas_addr
, idframe
->sas_addr
, SAS_ADDR_SIZE
);
172 static inline void asd_bytes_dmaed_tasklet(struct asd_ascb
*ascb
,
173 struct done_list_struct
*dl
,
174 int edb_id
, int phy_id
)
177 int edb_el
= edb_id
+ ascb
->edb_index
;
178 struct asd_dma_tok
*edb
= ascb
->ha
->seq
.edb_arr
[edb_el
];
179 struct asd_phy
*phy
= &ascb
->ha
->phys
[phy_id
];
180 struct sas_ha_struct
*sas_ha
= phy
->sas_phy
.ha
;
181 u16 size
= ((dl
->status_block
[3] & 7) << 8) | dl
->status_block
[2];
183 size
= min(size
, (u16
) sizeof(phy
->frame_rcvd
));
185 spin_lock_irqsave(&phy
->sas_phy
.frame_rcvd_lock
, flags
);
186 memcpy(phy
->sas_phy
.frame_rcvd
, edb
->vaddr
, size
);
187 phy
->sas_phy
.frame_rcvd_size
= size
;
188 asd_get_attached_sas_addr(phy
, phy
->sas_phy
.attached_sas_addr
);
189 spin_unlock_irqrestore(&phy
->sas_phy
.frame_rcvd_lock
, flags
);
190 asd_dump_frame_rcvd(phy
, dl
);
191 sas_ha
->notify_port_event(&phy
->sas_phy
, PORTE_BYTES_DMAED
);
194 static inline void asd_link_reset_err_tasklet(struct asd_ascb
*ascb
,
195 struct done_list_struct
*dl
,
198 struct asd_ha_struct
*asd_ha
= ascb
->ha
;
199 struct sas_ha_struct
*sas_ha
= &asd_ha
->sas_ha
;
200 struct asd_sas_phy
*sas_phy
= sas_ha
->sas_phy
[phy_id
];
201 u8 lr_error
= dl
->status_block
[1];
202 u8 retries_left
= dl
->status_block
[2];
206 ASD_DPRINTK("phy%d: Receive ID timer expired\n", phy_id
);
209 ASD_DPRINTK("phy%d: Loss of signal\n", phy_id
);
212 ASD_DPRINTK("phy%d: Loss of dword sync\n", phy_id
);
215 ASD_DPRINTK("phy%d: Receive FIS timeout\n", phy_id
);
218 ASD_DPRINTK("phy%d: unknown link reset error code: 0x%x\n",
223 asd_turn_led(asd_ha
, phy_id
, 0);
224 sas_phy_disconnected(sas_phy
);
225 sas_ha
->notify_port_event(sas_phy
, PORTE_LINK_RESET_ERR
);
227 if (retries_left
== 0) {
229 struct asd_ascb
*cp
= asd_ascb_alloc_list(ascb
->ha
, &num
,
232 asd_printk("%s: out of memory\n", __FUNCTION__
);
235 ASD_DPRINTK("phy%d: retries:0 performing link reset seq\n",
237 asd_build_control_phy(cp
, phy_id
, ENABLE_PHY
);
238 if (asd_post_ascb_list(ascb
->ha
, cp
, 1) != 0)
245 static inline void asd_primitive_rcvd_tasklet(struct asd_ascb
*ascb
,
246 struct done_list_struct
*dl
,
250 struct sas_ha_struct
*sas_ha
= &ascb
->ha
->sas_ha
;
251 struct asd_sas_phy
*sas_phy
= sas_ha
->sas_phy
[phy_id
];
252 u8 reg
= dl
->status_block
[1];
253 u32 cont
= dl
->status_block
[2] << ((reg
& 3)*8);
257 case LmPRMSTAT0BYTE0
:
263 ASD_DPRINTK("phy%d: BROADCAST change received:%d\n",
265 spin_lock_irqsave(&sas_phy
->sas_prim_lock
, flags
);
266 sas_phy
->sas_prim
= ffs(cont
);
267 spin_unlock_irqrestore(&sas_phy
->sas_prim_lock
, flags
);
268 sas_ha
->notify_port_event(sas_phy
,PORTE_BROADCAST_RCVD
);
272 ASD_DPRINTK("phy%d: unknown BREAK\n", phy_id
);
276 ASD_DPRINTK("phy%d: primitive reg:0x%x, cont:0x%04x\n",
281 case LmPRMSTAT1BYTE0
:
284 ASD_DPRINTK("phy%d: HARD_RESET primitive rcvd\n",
286 /* The sequencer disables all phys on that port.
287 * We have to re-enable the phys ourselves. */
288 sas_ha
->notify_port_event(sas_phy
, PORTE_HARD_RESET
);
292 ASD_DPRINTK("phy%d: primitive reg:0x%x, cont:0x%04x\n",
298 ASD_DPRINTK("unknown primitive register:0x%x\n",
299 dl
->status_block
[1]);
305 * asd_invalidate_edb -- invalidate an EDB and if necessary post the ESCB
306 * @ascb: pointer to Empty SCB
307 * @edb_id: index [0,6] to the empty data buffer which is to be invalidated
309 * After an EDB has been invalidated, if all EDBs in this ESCB have been
310 * invalidated, the ESCB is posted back to the sequencer.
311 * Context is tasklet/IRQ.
313 void asd_invalidate_edb(struct asd_ascb
*ascb
, int edb_id
)
315 struct asd_seq_data
*seq
= &ascb
->ha
->seq
;
316 struct empty_scb
*escb
= &ascb
->scb
->escb
;
317 struct sg_el
*eb
= &escb
->eb
[edb_id
];
318 struct asd_dma_tok
*edb
= seq
->edb_arr
[ascb
->edb_index
+ edb_id
];
320 memset(edb
->vaddr
, 0, ASD_EDB_SIZE
);
321 eb
->flags
|= ELEMENT_NOT_VALID
;
324 if (escb
->num_valid
== 0) {
326 /* ASD_DPRINTK("reposting escb: vaddr: 0x%p, "
327 "dma_handle: 0x%08llx, next: 0x%08llx, "
328 "index:%d, opcode:0x%02x\n",
330 (u64)ascb->dma_scb.dma_handle,
331 le64_to_cpu(ascb->scb->header.next_scb),
332 le16_to_cpu(ascb->scb->header.index),
333 ascb->scb->header.opcode);
335 escb
->num_valid
= ASD_EDBS_PER_SCB
;
336 for (i
= 0; i
< ASD_EDBS_PER_SCB
; i
++)
337 escb
->eb
[i
].flags
= 0;
338 if (!list_empty(&ascb
->list
))
339 list_del_init(&ascb
->list
);
340 i
= asd_post_escb_list(ascb
->ha
, ascb
, 1);
342 asd_printk("couldn't post escb, err:%d\n", i
);
346 /* hard reset a phy later */
347 static void do_phy_reset_later(void *data
)
349 struct sas_phy
*sas_phy
= data
;
352 ASD_DPRINTK("%s: About to hard reset phy %d\n", __FUNCTION__
,
353 sas_phy
->identify
.phy_identifier
);
354 /* Reset device port */
355 error
= sas_phy_reset(sas_phy
, 1);
357 ASD_DPRINTK("%s: Hard reset of phy %d failed (%d).\n",
358 __FUNCTION__
, sas_phy
->identify
.phy_identifier
, error
);
361 static void phy_reset_later(struct sas_phy
*sas_phy
, struct Scsi_Host
*shost
)
363 INIT_WORK(&sas_phy
->reset_work
, do_phy_reset_later
, sas_phy
);
364 queue_work(shost
->work_q
, &sas_phy
->reset_work
);
367 /* start up the ABORT TASK tmf... */
368 static void task_kill_later(struct asd_ascb
*ascb
)
370 struct asd_ha_struct
*asd_ha
= ascb
->ha
;
371 struct sas_ha_struct
*sas_ha
= &asd_ha
->sas_ha
;
372 struct Scsi_Host
*shost
= sas_ha
->core
.shost
;
373 struct sas_task
*task
= ascb
->uldd_task
;
375 INIT_WORK(&task
->abort_work
, (void (*)(void *))sas_task_abort
, task
);
376 queue_work(shost
->work_q
, &task
->abort_work
);
379 static void escb_tasklet_complete(struct asd_ascb
*ascb
,
380 struct done_list_struct
*dl
)
382 struct asd_ha_struct
*asd_ha
= ascb
->ha
;
383 struct sas_ha_struct
*sas_ha
= &asd_ha
->sas_ha
;
384 int edb
= (dl
->opcode
& DL_PHY_MASK
) - 1; /* [0xc1,0xc7] -> [0,6] */
385 u8 sb_opcode
= dl
->status_block
[0];
386 int phy_id
= sb_opcode
& DL_PHY_MASK
;
387 struct asd_sas_phy
*sas_phy
= sas_ha
->sas_phy
[phy_id
];
389 if (edb
> 6 || edb
< 0) {
390 ASD_DPRINTK("edb is 0x%x! dl->opcode is 0x%x\n",
392 ASD_DPRINTK("sb_opcode : 0x%x, phy_id: 0x%x\n",
394 ASD_DPRINTK("escb: vaddr: 0x%p, "
395 "dma_handle: 0x%llx, next: 0x%llx, "
396 "index:%d, opcode:0x%02x\n",
398 (unsigned long long)ascb
->dma_scb
.dma_handle
,
400 le64_to_cpu(ascb
->scb
->header
.next_scb
),
401 le16_to_cpu(ascb
->scb
->header
.index
),
402 ascb
->scb
->header
.opcode
);
405 /* Catch these before we mask off the sb_opcode bits */
407 case REQ_TASK_ABORT
: {
408 struct asd_ascb
*a
, *b
;
411 tc_abort
= *((u16
*)(&dl
->status_block
[1]));
412 tc_abort
= le16_to_cpu(tc_abort
);
414 ASD_DPRINTK("%s: REQ_TASK_ABORT, reason=0x%X\n",
415 __FUNCTION__
, dl
->status_block
[3]);
417 /* Find the pending task and abort it. */
418 list_for_each_entry_safe(a
, b
, &asd_ha
->seq
.pend_q
, list
)
419 if (a
->tc_index
== tc_abort
) {
425 case REQ_DEVICE_RESET
: {
426 struct Scsi_Host
*shost
= sas_ha
->core
.shost
;
427 struct sas_phy
*dev_phy
;
431 conn_handle
= *((u16
*)(&dl
->status_block
[1]));
432 conn_handle
= le16_to_cpu(conn_handle
);
434 ASD_DPRINTK("%s: REQ_DEVICE_RESET, reason=0x%X\n", __FUNCTION__
,
435 dl
->status_block
[3]);
437 /* Kill all pending tasks and reset the device */
439 list_for_each_entry(a
, &asd_ha
->seq
.pend_q
, list
) {
440 struct sas_task
*task
;
441 struct domain_device
*dev
;
449 x
= (u16
)dev
->lldd_dev
;
450 if (x
== conn_handle
) {
451 dev_phy
= dev
->port
->phy
;
456 /* Reset device port */
458 ASD_DPRINTK("%s: No pending commands; can't reset.\n",
462 phy_reset_later(dev_phy
, shost
);
465 case SIGNAL_NCQ_ERROR
:
466 ASD_DPRINTK("%s: SIGNAL_NCQ_ERROR\n", __FUNCTION__
);
468 case CLEAR_NCQ_ERROR
:
469 ASD_DPRINTK("%s: CLEAR_NCQ_ERROR\n", __FUNCTION__
);
473 sb_opcode
&= ~DL_PHY_MASK
;
477 ASD_DPRINTK("%s: phy%d: BYTES_DMAED\n", __FUNCTION__
, phy_id
);
478 asd_bytes_dmaed_tasklet(ascb
, dl
, edb
, phy_id
);
480 case PRIMITIVE_RECVD
:
481 ASD_DPRINTK("%s: phy%d: PRIMITIVE_RECVD\n", __FUNCTION__
,
483 asd_primitive_rcvd_tasklet(ascb
, dl
, phy_id
);
486 ASD_DPRINTK("%s: phy%d: PHY_EVENT\n", __FUNCTION__
, phy_id
);
487 asd_phy_event_tasklet(ascb
, dl
);
489 case LINK_RESET_ERROR
:
490 ASD_DPRINTK("%s: phy%d: LINK_RESET_ERROR\n", __FUNCTION__
,
492 asd_link_reset_err_tasklet(ascb
, dl
, phy_id
);
495 ASD_DPRINTK("%s: phy%d: TIMER_EVENT, lost dw sync\n",
496 __FUNCTION__
, phy_id
);
497 asd_turn_led(asd_ha
, phy_id
, 0);
498 /* the device is gone */
499 sas_phy_disconnected(sas_phy
);
500 sas_ha
->notify_port_event(sas_phy
, PORTE_TIMER_EVENT
);
503 ASD_DPRINTK("%s: phy%d: unknown event:0x%x\n", __FUNCTION__
,
505 ASD_DPRINTK("edb is 0x%x! dl->opcode is 0x%x\n",
507 ASD_DPRINTK("sb_opcode : 0x%x, phy_id: 0x%x\n",
509 ASD_DPRINTK("escb: vaddr: 0x%p, "
510 "dma_handle: 0x%llx, next: 0x%llx, "
511 "index:%d, opcode:0x%02x\n",
513 (unsigned long long)ascb
->dma_scb
.dma_handle
,
515 le64_to_cpu(ascb
->scb
->header
.next_scb
),
516 le16_to_cpu(ascb
->scb
->header
.index
),
517 ascb
->scb
->header
.opcode
);
522 asd_invalidate_edb(ascb
, edb
);
525 int asd_init_post_escbs(struct asd_ha_struct
*asd_ha
)
527 struct asd_seq_data
*seq
= &asd_ha
->seq
;
530 for (i
= 0; i
< seq
->num_escbs
; i
++)
531 seq
->escb_arr
[i
]->tasklet_complete
= escb_tasklet_complete
;
533 ASD_DPRINTK("posting %d escbs\n", i
);
534 return asd_post_escb_list(asd_ha
, seq
->escb_arr
[0], seq
->num_escbs
);
537 /* ---------- CONTROL PHY ---------- */
539 #define CONTROL_PHY_STATUS (CURRENT_DEVICE_PRESENT | CURRENT_OOB_DONE \
540 | CURRENT_SPINUP_HOLD | CURRENT_GTO_TIMEOUT \
544 * control_phy_tasklet_complete -- tasklet complete for CONTROL PHY ascb
545 * @ascb: pointer to an ascb
546 * @dl: pointer to the done list entry
548 * This function completes a CONTROL PHY scb and frees the ascb.
550 * - an LED blinks if there is IO though it,
551 * - if a device is connected to the LED, it is lit,
552 * - if no device is connected to the LED, is is dimmed (off).
554 static void control_phy_tasklet_complete(struct asd_ascb
*ascb
,
555 struct done_list_struct
*dl
)
557 struct asd_ha_struct
*asd_ha
= ascb
->ha
;
558 struct scb
*scb
= ascb
->scb
;
559 struct control_phy
*control_phy
= &scb
->control_phy
;
560 u8 phy_id
= control_phy
->phy_id
;
561 struct asd_phy
*phy
= &ascb
->ha
->phys
[phy_id
];
563 u8 status
= dl
->status_block
[0];
564 u8 oob_status
= dl
->status_block
[1];
565 u8 oob_mode
= dl
->status_block
[2];
566 /* u8 oob_signals= dl->status_block[3]; */
569 ASD_DPRINTK("%s: phy%d status block opcode:0x%x\n",
570 __FUNCTION__
, phy_id
, status
);
574 switch (control_phy
->sub_func
) {
576 asd_ha
->hw_prof
.enabled_phys
&= ~(1 << phy_id
);
577 asd_turn_led(asd_ha
, phy_id
, 0);
578 asd_control_led(asd_ha
, phy_id
, 0);
579 ASD_DPRINTK("%s: disable phy%d\n", __FUNCTION__
, phy_id
);
583 asd_control_led(asd_ha
, phy_id
, 1);
584 if (oob_status
& CURRENT_OOB_DONE
) {
585 asd_ha
->hw_prof
.enabled_phys
|= (1 << phy_id
);
586 get_lrate_mode(phy
, oob_mode
);
587 asd_turn_led(asd_ha
, phy_id
, 1);
588 ASD_DPRINTK("%s: phy%d, lrate:0x%x, proto:0x%x\n",
589 __FUNCTION__
, phy_id
,phy
->sas_phy
.linkrate
,
590 phy
->sas_phy
.iproto
);
591 } else if (oob_status
& CURRENT_SPINUP_HOLD
) {
592 asd_ha
->hw_prof
.enabled_phys
|= (1 << phy_id
);
593 asd_turn_led(asd_ha
, phy_id
, 1);
594 ASD_DPRINTK("%s: phy%d, spinup hold\n", __FUNCTION__
,
596 } else if (oob_status
& CURRENT_ERR_MASK
) {
597 asd_turn_led(asd_ha
, phy_id
, 0);
598 ASD_DPRINTK("%s: phy%d: error: oob status:0x%02x\n",
599 __FUNCTION__
, phy_id
, oob_status
);
600 } else if (oob_status
& (CURRENT_HOT_PLUG_CNCT
601 | CURRENT_DEVICE_PRESENT
)) {
602 asd_ha
->hw_prof
.enabled_phys
|= (1 << phy_id
);
603 asd_turn_led(asd_ha
, phy_id
, 1);
604 ASD_DPRINTK("%s: phy%d: hot plug or device present\n",
605 __FUNCTION__
, phy_id
);
607 asd_ha
->hw_prof
.enabled_phys
|= (1 << phy_id
);
608 asd_turn_led(asd_ha
, phy_id
, 0);
609 ASD_DPRINTK("%s: phy%d: no device present: "
611 __FUNCTION__
, phy_id
, oob_status
);
614 case RELEASE_SPINUP_HOLD
:
616 case EXECUTE_HARD_RESET
:
617 ASD_DPRINTK("%s: phy%d: sub_func:0x%x\n", __FUNCTION__
,
618 phy_id
, control_phy
->sub_func
);
622 ASD_DPRINTK("%s: phy%d: sub_func:0x%x?\n", __FUNCTION__
,
623 phy_id
, control_phy
->sub_func
);
630 static inline void set_speed_mask(u8
*speed_mask
, struct asd_phy_desc
*pd
)
632 /* disable all speeds, then enable defaults */
633 *speed_mask
= SAS_SPEED_60_DIS
| SAS_SPEED_30_DIS
| SAS_SPEED_15_DIS
634 | SATA_SPEED_30_DIS
| SATA_SPEED_15_DIS
;
636 switch (pd
->max_sas_lrate
) {
637 case SAS_LINK_RATE_6_0_GBPS
:
638 *speed_mask
&= ~SAS_SPEED_60_DIS
;
640 case SAS_LINK_RATE_3_0_GBPS
:
641 *speed_mask
&= ~SAS_SPEED_30_DIS
;
642 case SAS_LINK_RATE_1_5_GBPS
:
643 *speed_mask
&= ~SAS_SPEED_15_DIS
;
646 switch (pd
->min_sas_lrate
) {
647 case SAS_LINK_RATE_6_0_GBPS
:
648 *speed_mask
|= SAS_SPEED_30_DIS
;
649 case SAS_LINK_RATE_3_0_GBPS
:
650 *speed_mask
|= SAS_SPEED_15_DIS
;
652 case SAS_LINK_RATE_1_5_GBPS
:
657 switch (pd
->max_sata_lrate
) {
658 case SAS_LINK_RATE_3_0_GBPS
:
659 *speed_mask
&= ~SATA_SPEED_30_DIS
;
661 case SAS_LINK_RATE_1_5_GBPS
:
662 *speed_mask
&= ~SATA_SPEED_15_DIS
;
665 switch (pd
->min_sata_lrate
) {
666 case SAS_LINK_RATE_3_0_GBPS
:
667 *speed_mask
|= SATA_SPEED_15_DIS
;
669 case SAS_LINK_RATE_1_5_GBPS
:
676 * asd_build_control_phy -- build a CONTROL PHY SCB
677 * @ascb: pointer to an ascb
678 * @phy_id: phy id to control, integer
679 * @subfunc: subfunction, what to actually to do the phy
681 * This function builds a CONTROL PHY scb. No allocation of any kind
682 * is performed. @ascb is allocated with the list function.
683 * The caller can override the ascb->tasklet_complete to point
684 * to its own callback function. It must call asd_ascb_free()
685 * at its tasklet complete function.
686 * See the default implementation.
688 void asd_build_control_phy(struct asd_ascb
*ascb
, int phy_id
, u8 subfunc
)
690 struct asd_phy
*phy
= &ascb
->ha
->phys
[phy_id
];
691 struct scb
*scb
= ascb
->scb
;
692 struct control_phy
*control_phy
= &scb
->control_phy
;
694 scb
->header
.opcode
= CONTROL_PHY
;
695 control_phy
->phy_id
= (u8
) phy_id
;
696 control_phy
->sub_func
= subfunc
;
699 case EXECUTE_HARD_RESET
: /* 0x81 */
700 case ENABLE_PHY
: /* 0x01 */
701 /* decide hot plug delay */
702 control_phy
->hot_plug_delay
= HOTPLUG_DELAY_TIMEOUT
;
704 /* decide speed mask */
705 set_speed_mask(&control_phy
->speed_mask
, phy
->phy_desc
);
707 /* initiator port settings are in the hi nibble */
708 if (phy
->sas_phy
.role
== PHY_ROLE_INITIATOR
)
709 control_phy
->port_type
= SAS_PROTO_ALL
<< 4;
710 else if (phy
->sas_phy
.role
== PHY_ROLE_TARGET
)
711 control_phy
->port_type
= SAS_PROTO_ALL
;
713 control_phy
->port_type
=
714 (SAS_PROTO_ALL
<< 4) | SAS_PROTO_ALL
;
716 /* link reset retries, this should be nominal */
717 control_phy
->link_reset_retries
= 10;
719 case RELEASE_SPINUP_HOLD
: /* 0x02 */
720 /* decide the func_mask */
721 control_phy
->func_mask
= FUNCTION_MASK_DEFAULT
;
722 if (phy
->phy_desc
->flags
& ASD_SATA_SPINUP_HOLD
)
723 control_phy
->func_mask
&= ~SPINUP_HOLD_DIS
;
725 control_phy
->func_mask
|= SPINUP_HOLD_DIS
;
728 control_phy
->conn_handle
= cpu_to_le16(0xFFFF);
730 ascb
->tasklet_complete
= control_phy_tasklet_complete
;
733 /* ---------- INITIATE LINK ADM TASK ---------- */
735 static void link_adm_tasklet_complete(struct asd_ascb
*ascb
,
736 struct done_list_struct
*dl
)
738 u8 opcode
= dl
->opcode
;
739 struct initiate_link_adm
*link_adm
= &ascb
->scb
->link_adm
;
740 u8 phy_id
= link_adm
->phy_id
;
742 if (opcode
!= TC_NO_ERROR
) {
743 asd_printk("phy%d: link adm task 0x%x completed with error "
744 "0x%x\n", phy_id
, link_adm
->sub_func
, opcode
);
746 ASD_DPRINTK("phy%d: link adm task 0x%x: 0x%x\n",
747 phy_id
, link_adm
->sub_func
, opcode
);
752 void asd_build_initiate_link_adm_task(struct asd_ascb
*ascb
, int phy_id
,
755 struct scb
*scb
= ascb
->scb
;
756 struct initiate_link_adm
*link_adm
= &scb
->link_adm
;
758 scb
->header
.opcode
= INITIATE_LINK_ADM_TASK
;
760 link_adm
->phy_id
= phy_id
;
761 link_adm
->sub_func
= subfunc
;
762 link_adm
->conn_handle
= cpu_to_le16(0xFFFF);
764 ascb
->tasklet_complete
= link_adm_tasklet_complete
;
767 /* ---------- SCB timer ---------- */
770 * asd_ascb_timedout -- called when a pending SCB's timer has expired
771 * @data: unsigned long, a pointer to the ascb in question
773 * This is the default timeout function which does the most necessary.
774 * Upper layers can implement their own timeout function, say to free
775 * resources they have with this SCB, and then call this one at the
776 * end of their timeout function. To do this, one should initialize
777 * the ascb->timer.{function, data, expires} prior to calling the post
778 * funcion. The timer is started by the post function.
780 void asd_ascb_timedout(unsigned long data
)
782 struct asd_ascb
*ascb
= (void *) data
;
783 struct asd_seq_data
*seq
= &ascb
->ha
->seq
;
786 ASD_DPRINTK("scb:0x%x timed out\n", ascb
->scb
->header
.opcode
);
788 spin_lock_irqsave(&seq
->pend_q_lock
, flags
);
790 list_del_init(&ascb
->list
);
791 spin_unlock_irqrestore(&seq
->pend_q_lock
, flags
);
796 /* ---------- CONTROL PHY ---------- */
798 /* Given the spec value, return a driver value. */
799 static const int phy_func_table
[] = {
800 [PHY_FUNC_NOP
] = PHY_NO_OP
,
801 [PHY_FUNC_LINK_RESET
] = ENABLE_PHY
,
802 [PHY_FUNC_HARD_RESET
] = EXECUTE_HARD_RESET
,
803 [PHY_FUNC_DISABLE
] = DISABLE_PHY
,
804 [PHY_FUNC_RELEASE_SPINUP_HOLD
] = RELEASE_SPINUP_HOLD
,
807 int asd_control_phy(struct asd_sas_phy
*phy
, enum phy_func func
, void *arg
)
809 struct asd_ha_struct
*asd_ha
= phy
->ha
->lldd_ha
;
810 struct asd_phy_desc
*pd
= asd_ha
->phys
[phy
->id
].phy_desc
;
811 struct asd_ascb
*ascb
;
812 struct sas_phy_linkrates
*rates
;
816 case PHY_FUNC_CLEAR_ERROR_LOG
:
818 case PHY_FUNC_SET_LINK_RATE
:
820 if (rates
->minimum_linkrate
) {
821 pd
->min_sas_lrate
= rates
->minimum_linkrate
;
822 pd
->min_sata_lrate
= rates
->minimum_linkrate
;
824 if (rates
->maximum_linkrate
) {
825 pd
->max_sas_lrate
= rates
->maximum_linkrate
;
826 pd
->max_sata_lrate
= rates
->maximum_linkrate
;
828 func
= PHY_FUNC_LINK_RESET
;
834 ascb
= asd_ascb_alloc_list(asd_ha
, &res
, GFP_KERNEL
);
838 asd_build_control_phy(ascb
, phy
->id
, phy_func_table
[func
]);
839 res
= asd_post_ascb_list(asd_ha
, ascb
, 1);