arch/arm/mach-imx/mach-mx25_3ds.c

   1 /*
   2  * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
   3  *
   4  * This program is free software; you can redistribute it and/or
   5  * modify it under the terms of the GNU General Public License
   6  * as published by the Free Software Foundation; either version 2
   7  * of the License, or (at your option) any later version.
   8  * This program is distributed in the hope that it will be useful,
   9  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  10  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  11  * GNU General Public License for more details.
  12  *
  13  * You should have received a copy of the GNU General Public License
  14  * along with this program; if not, write to the Free Software
  15  * Foundation, Inc., 51 Franklin Street, Fifth Floor,
  16  * Boston, MA  02110-1301, USA.
  17  */
  18
  19 /*
  20  * This machine is known as:
  21  *  - i.MX25 3-Stack Development System
  22  *  - i.MX25 Platform Development Kit (i.MX25 PDK)
  23  */
  24
  25 #include <linux/types.h>
  26 #include <linux/init.h>
  27 #include <linux/delay.h>
  28 #include <linux/clk.h>
  29 #include <linux/irq.h>
  30 #include <linux/gpio.h>
  31 #include <linux/platform_device.h>
  32 #include <linux/input/matrix_keypad.h>
  33 #include <linux/usb/otg.h>
  34
  35 #include <mach/hardware.h>
  36 #include <asm/mach-types.h>
  37 #include <asm/mach/arch.h>
  38 #include <asm/mach/time.h>
  39 #include <asm/memory.h>
  40 #include <asm/mach/map.h>
  41 #include <mach/common.h>
  42 #include <mach/mx25.h>
  43 #include <mach/iomux-mx25.h>
  44
  45 #include "devices-imx25.h"
  46
  47 static const struct imxuart_platform_data uart_pdata __initconst = {
  48         .flags = IMXUART_HAVE_RTSCTS,
  49 };
  50
  51 static iomux_v3_cfg_t mx25pdk_pads[] = {
  52         MX25_PAD_FEC_MDC__FEC_MDC,
  53         MX25_PAD_FEC_MDIO__FEC_MDIO,
  54         MX25_PAD_FEC_TDATA0__FEC_TDATA0,
  55         MX25_PAD_FEC_TDATA1__FEC_TDATA1,
  56         MX25_PAD_FEC_TX_EN__FEC_TX_EN,
  57         MX25_PAD_FEC_RDATA0__FEC_RDATA0,
  58         MX25_PAD_FEC_RDATA1__FEC_RDATA1,
  59         MX25_PAD_FEC_RX_DV__FEC_RX_DV,
  60         MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
  61         MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */
  62         MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */
  63
  64         /* LCD */
  65         MX25_PAD_LD0__LD0,
  66         MX25_PAD_LD1__LD1,
  67         MX25_PAD_LD2__LD2,
  68         MX25_PAD_LD3__LD3,
  69         MX25_PAD_LD4__LD4,
  70         MX25_PAD_LD5__LD5,
  71         MX25_PAD_LD6__LD6,
  72         MX25_PAD_LD7__LD7,
  73         MX25_PAD_LD8__LD8,
  74         MX25_PAD_LD9__LD9,
  75         MX25_PAD_LD10__LD10,
  76         MX25_PAD_LD11__LD11,
  77         MX25_PAD_LD12__LD12,
  78         MX25_PAD_LD13__LD13,
  79         MX25_PAD_LD14__LD14,
  80         MX25_PAD_LD15__LD15,
  81         MX25_PAD_GPIO_E__LD16,
  82         MX25_PAD_GPIO_F__LD17,
  83         MX25_PAD_HSYNC__HSYNC,
  84         MX25_PAD_VSYNC__VSYNC,
  85         MX25_PAD_LSCLK__LSCLK,
  86         MX25_PAD_OE_ACD__OE_ACD,
  87         MX25_PAD_CONTRAST__CONTRAST,
  88
  89         /* Keypad */
  90         MX25_PAD_KPP_ROW0__KPP_ROW0,
  91         MX25_PAD_KPP_ROW1__KPP_ROW1,
  92         MX25_PAD_KPP_ROW2__KPP_ROW2,
  93         MX25_PAD_KPP_ROW3__KPP_ROW3,
  94         MX25_PAD_KPP_COL0__KPP_COL0,
  95         MX25_PAD_KPP_COL1__KPP_COL1,
  96         MX25_PAD_KPP_COL2__KPP_COL2,
  97         MX25_PAD_KPP_COL3__KPP_COL3,
  98
  99         /* SD1 */
 100         MX25_PAD_SD1_CMD__SD1_CMD,
 101         MX25_PAD_SD1_CLK__SD1_CLK,
 102         MX25_PAD_SD1_DATA0__SD1_DATA0,
 103         MX25_PAD_SD1_DATA1__SD1_DATA1,
 104         MX25_PAD_SD1_DATA2__SD1_DATA2,
 105         MX25_PAD_SD1_DATA3__SD1_DATA3,
 106 };
 107
 108 static const struct fec_platform_data mx25_fec_pdata __initconst = {
 109         .phy    = PHY_INTERFACE_MODE_RMII,
 110 };
 111
 112 #define FEC_ENABLE_GPIO         IMX_GPIO_NR(2, 3)
 113 #define FEC_RESET_B_GPIO        IMX_GPIO_NR(4, 8)
 114
 115 static void __init mx25pdk_fec_reset(void)
 116 {
 117         gpio_request(FEC_ENABLE_GPIO, "FEC PHY enable");
 118         gpio_request(FEC_RESET_B_GPIO, "FEC PHY reset");
 119
 120         gpio_direction_output(FEC_ENABLE_GPIO, 0);  /* drop PHY power */
 121         gpio_direction_output(FEC_RESET_B_GPIO, 0); /* assert reset */
 122         udelay(2);
 123
 124         /* turn on PHY power and lift reset */
 125         gpio_set_value(FEC_ENABLE_GPIO, 1);
 126         gpio_set_value(FEC_RESET_B_GPIO, 1);
 127 }
 128
 129 static const struct mxc_nand_platform_data
 130 mx25pdk_nand_board_info __initconst = {
 131         .width          = 1,
 132         .hw_ecc         = 1,
 133         .flash_bbt      = 1,
 134 };
 135
 136 static struct imx_fb_videomode mx25pdk_modes[] = {
 137         {
 138                 .mode   = {
 139                         .name           = "CRT-VGA",
 140                         .refresh        = 60,
 141                         .xres           = 640,
 142                         .yres           = 480,
 143                         .pixclock       = 39683,
 144                         .left_margin    = 45,
 145                         .right_margin   = 114,
 146                         .upper_margin   = 33,
 147                         .lower_margin   = 11,
 148                         .hsync_len      = 1,
 149                         .vsync_len      = 1,
 150                 },
 151                 .bpp    = 16,
 152                 .pcr    = 0xFA208B80,
 153         },
 154 };
 155
 156 static const struct imx_fb_platform_data mx25pdk_fb_pdata __initconst = {
 157         .mode           = mx25pdk_modes,
 158         .num_modes      = ARRAY_SIZE(mx25pdk_modes),
 159         .pwmr           = 0x00A903FF,
 160         .lscr1          = 0x00120300,
 161         .dmacr          = 0x00020010,
 162 };
 163
 164 static const uint32_t mx25pdk_keymap[] = {
 165         KEY(0, 0, KEY_UP),
 166         KEY(0, 1, KEY_DOWN),
 167         KEY(0, 2, KEY_VOLUMEDOWN),
 168         KEY(0, 3, KEY_HOME),
 169         KEY(1, 0, KEY_RIGHT),
 170         KEY(1, 1, KEY_LEFT),
 171         KEY(1, 2, KEY_ENTER),
 172         KEY(1, 3, KEY_VOLUMEUP),
 173         KEY(2, 0, KEY_F6),
 174         KEY(2, 1, KEY_F8),
 175         KEY(2, 2, KEY_F9),
 176         KEY(2, 3, KEY_F10),
 177         KEY(3, 0, KEY_F1),
 178         KEY(3, 1, KEY_F2),
 179         KEY(3, 2, KEY_F3),
 180         KEY(3, 3, KEY_POWER),
 181 };
 182
 183 static const struct matrix_keymap_data mx25pdk_keymap_data __initconst = {
 184         .keymap         = mx25pdk_keymap,
 185         .keymap_size    = ARRAY_SIZE(mx25pdk_keymap),
 186 };
 187
 188 static int mx25pdk_usbh2_init(struct platform_device *pdev)
 189 {
 190         return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
 191 }
 192
 193 static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
 194         .init   = mx25pdk_usbh2_init,
 195         .portsc = MXC_EHCI_MODE_SERIAL,
 196 };
 197
 198 static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
 199         .operating_mode = FSL_USB2_DR_DEVICE,
 200         .phy_mode       = FSL_USB2_PHY_UTMI,
 201 };
 202
 203 static void __init mx25pdk_init(void)
 204 {
 205         mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
 206                         ARRAY_SIZE(mx25pdk_pads));
 207
 208         imx25_add_imx_uart0(&uart_pdata);
 209         imx25_add_fsl_usb2_udc(&otg_device_pdata);
 210         imx25_add_mxc_ehci_hs(&usbh2_pdata);
 211         imx25_add_mxc_nand(&mx25pdk_nand_board_info);
 212         imx25_add_imxdi_rtc(NULL);
 213         imx25_add_imx_fb(&mx25pdk_fb_pdata);
 214         imx25_add_imx2_wdt(NULL);
 215
 216         mx25pdk_fec_reset();
 217         imx25_add_fec(&mx25_fec_pdata);
 218         imx25_add_imx_keypad(&mx25pdk_keymap_data);
 219
 220         imx25_add_sdhci_esdhc_imx(0, NULL);
 221 }
 222
 223 static void __init mx25pdk_timer_init(void)
 224 {
 225         mx25_clocks_init();
 226 }
 227
 228 static struct sys_timer mx25pdk_timer = {
 229         .init   = mx25pdk_timer_init,
 230 };
 231
 232 MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
 233         /* Maintainer: Freescale Semiconductor, Inc. */
 234         .boot_params = MX25_PHYS_OFFSET + 0x100,
 235         .map_io = mx25_map_io,
 236         .init_early = imx25_init_early,
 237         .init_irq = mx25_init_irq,
 238         .timer = &mx25pdk_timer,
 239         .init_machine = mx25pdk_init,
 240 MACHINE_END