[SCSI] be2iscsi: Driver Version change to 2.0.549.0
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / ieee1394 / ieee1394.h
blobaf320e2c50793c6bb39995a55a1caa9f79897504
1 /*
2 * Generic IEEE 1394 definitions
3 */
5 #ifndef _IEEE1394_IEEE1394_H
6 #define _IEEE1394_IEEE1394_H
8 #define TCODE_WRITEQ 0x0
9 #define TCODE_WRITEB 0x1
10 #define TCODE_WRITE_RESPONSE 0x2
11 #define TCODE_READQ 0x4
12 #define TCODE_READB 0x5
13 #define TCODE_READQ_RESPONSE 0x6
14 #define TCODE_READB_RESPONSE 0x7
15 #define TCODE_CYCLE_START 0x8
16 #define TCODE_LOCK_REQUEST 0x9
17 #define TCODE_ISO_DATA 0xa
18 #define TCODE_STREAM_DATA 0xa
19 #define TCODE_LOCK_RESPONSE 0xb
21 #define RCODE_COMPLETE 0x0
22 #define RCODE_CONFLICT_ERROR 0x4
23 #define RCODE_DATA_ERROR 0x5
24 #define RCODE_TYPE_ERROR 0x6
25 #define RCODE_ADDRESS_ERROR 0x7
27 #define EXTCODE_MASK_SWAP 0x1
28 #define EXTCODE_COMPARE_SWAP 0x2
29 #define EXTCODE_FETCH_ADD 0x3
30 #define EXTCODE_LITTLE_ADD 0x4
31 #define EXTCODE_BOUNDED_ADD 0x5
32 #define EXTCODE_WRAP_ADD 0x6
34 #define ACK_COMPLETE 0x1
35 #define ACK_PENDING 0x2
36 #define ACK_BUSY_X 0x4
37 #define ACK_BUSY_A 0x5
38 #define ACK_BUSY_B 0x6
39 #define ACK_TARDY 0xb
40 #define ACK_CONFLICT_ERROR 0xc
41 #define ACK_DATA_ERROR 0xd
42 #define ACK_TYPE_ERROR 0xe
43 #define ACK_ADDRESS_ERROR 0xf
45 /* Non-standard "ACK codes" for internal use */
46 #define ACKX_NONE (-1)
47 #define ACKX_SEND_ERROR (-2)
48 #define ACKX_ABORTED (-3)
49 #define ACKX_TIMEOUT (-4)
51 #define IEEE1394_SPEED_100 0x00
52 #define IEEE1394_SPEED_200 0x01
53 #define IEEE1394_SPEED_400 0x02
54 #define IEEE1394_SPEED_800 0x03
55 #define IEEE1394_SPEED_1600 0x04
56 #define IEEE1394_SPEED_3200 0x05
57 #define IEEE1394_SPEED_MAX IEEE1394_SPEED_3200
59 /* Maps speed values above to a string representation */
60 extern const char *hpsb_speedto_str[];
62 /* 1394a cable PHY packets */
63 #define SELFID_PWRCL_NO_POWER 0x0
64 #define SELFID_PWRCL_PROVIDE_15W 0x1
65 #define SELFID_PWRCL_PROVIDE_30W 0x2
66 #define SELFID_PWRCL_PROVIDE_45W 0x3
67 #define SELFID_PWRCL_USE_1W 0x4
68 #define SELFID_PWRCL_USE_3W 0x5
69 #define SELFID_PWRCL_USE_6W 0x6
70 #define SELFID_PWRCL_USE_10W 0x7
72 #define SELFID_PORT_CHILD 0x3
73 #define SELFID_PORT_PARENT 0x2
74 #define SELFID_PORT_NCONN 0x1
75 #define SELFID_PORT_NONE 0x0
77 #define SELFID_SPEED_UNKNOWN 0x3 /* 1394b PHY */
79 #define PHYPACKET_LINKON 0x40000000
80 #define PHYPACKET_PHYCONFIG_R 0x00800000
81 #define PHYPACKET_PHYCONFIG_T 0x00400000
82 #define EXTPHYPACKET_TYPE_PING 0x00000000
83 #define EXTPHYPACKET_TYPE_REMOTEACCESS_BASE 0x00040000
84 #define EXTPHYPACKET_TYPE_REMOTEACCESS_PAGED 0x00140000
85 #define EXTPHYPACKET_TYPE_REMOTEREPLY_BASE 0x000C0000
86 #define EXTPHYPACKET_TYPE_REMOTEREPLY_PAGED 0x001C0000
87 #define EXTPHYPACKET_TYPE_REMOTECOMMAND 0x00200000
88 #define EXTPHYPACKET_TYPE_REMOTECONFIRMATION 0x00280000
89 #define EXTPHYPACKET_TYPE_RESUME 0x003C0000
91 #define EXTPHYPACKET_TYPEMASK 0xC0FC0000
93 #define PHYPACKET_PORT_SHIFT 24
94 #define PHYPACKET_GAPCOUNT_SHIFT 16
96 /* 1394a PHY register map bitmasks */
97 #define PHY_00_PHYSICAL_ID 0xFC
98 #define PHY_00_R 0x02 /* Root */
99 #define PHY_00_PS 0x01 /* Power Status*/
100 #define PHY_01_RHB 0x80 /* Root Hold-Off */
101 #define PHY_01_IBR 0x80 /* Initiate Bus Reset */
102 #define PHY_01_GAP_COUNT 0x3F
103 #define PHY_02_EXTENDED 0xE0 /* 0x7 for 1394a-compliant PHY */
104 #define PHY_02_TOTAL_PORTS 0x1F
105 #define PHY_03_MAX_SPEED 0xE0
106 #define PHY_03_DELAY 0x0F
107 #define PHY_04_LCTRL 0x80 /* Link Active Report Control */
108 #define PHY_04_CONTENDER 0x40
109 #define PHY_04_JITTER 0x38
110 #define PHY_04_PWR_CLASS 0x07 /* Power Class */
111 #define PHY_05_WATCHDOG 0x80
112 #define PHY_05_ISBR 0x40 /* Initiate Short Bus Reset */
113 #define PHY_05_LOOP 0x20 /* Loop Detect */
114 #define PHY_05_PWR_FAIL 0x10 /* Cable Power Failure Detect */
115 #define PHY_05_TIMEOUT 0x08 /* Arbitration State Machine Timeout */
116 #define PHY_05_PORT_EVENT 0x04 /* Port Event Detect */
117 #define PHY_05_ENAB_ACCEL 0x02 /* Enable Arbitration Acceleration */
118 #define PHY_05_ENAB_MULTI 0x01 /* Ena. Multispeed Packet Concatenation */
120 #include <asm/byteorder.h>
122 /* '1' '3' '9' '4' in ASCII */
123 #define IEEE1394_BUSID_MAGIC cpu_to_be32(0x31333934)
125 #ifdef __BIG_ENDIAN_BITFIELD
127 struct selfid {
128 u32 packet_identifier:2; /* always binary 10 */
129 u32 phy_id:6;
130 /* byte */
131 u32 extended:1; /* if true is struct ext_selfid */
132 u32 link_active:1;
133 u32 gap_count:6;
134 /* byte */
135 u32 speed:2;
136 u32 phy_delay:2;
137 u32 contender:1;
138 u32 power_class:3;
139 /* byte */
140 u32 port0:2;
141 u32 port1:2;
142 u32 port2:2;
143 u32 initiated_reset:1;
144 u32 more_packets:1;
145 } __attribute__((packed));
147 struct ext_selfid {
148 u32 packet_identifier:2; /* always binary 10 */
149 u32 phy_id:6;
150 /* byte */
151 u32 extended:1; /* if false is struct selfid */
152 u32 seq_nr:3;
153 u32 reserved:2;
154 u32 porta:2;
155 /* byte */
156 u32 portb:2;
157 u32 portc:2;
158 u32 portd:2;
159 u32 porte:2;
160 /* byte */
161 u32 portf:2;
162 u32 portg:2;
163 u32 porth:2;
164 u32 reserved2:1;
165 u32 more_packets:1;
166 } __attribute__((packed));
168 #elif defined __LITTLE_ENDIAN_BITFIELD /* __BIG_ENDIAN_BITFIELD */
171 * Note: these mean to be bit fields of a big endian SelfID as seen on a little
172 * endian machine. Without swapping.
175 struct selfid {
176 u32 phy_id:6;
177 u32 packet_identifier:2; /* always binary 10 */
178 /* byte */
179 u32 gap_count:6;
180 u32 link_active:1;
181 u32 extended:1; /* if true is struct ext_selfid */
182 /* byte */
183 u32 power_class:3;
184 u32 contender:1;
185 u32 phy_delay:2;
186 u32 speed:2;
187 /* byte */
188 u32 more_packets:1;
189 u32 initiated_reset:1;
190 u32 port2:2;
191 u32 port1:2;
192 u32 port0:2;
193 } __attribute__((packed));
195 struct ext_selfid {
196 u32 phy_id:6;
197 u32 packet_identifier:2; /* always binary 10 */
198 /* byte */
199 u32 porta:2;
200 u32 reserved:2;
201 u32 seq_nr:3;
202 u32 extended:1; /* if false is struct selfid */
203 /* byte */
204 u32 porte:2;
205 u32 portd:2;
206 u32 portc:2;
207 u32 portb:2;
208 /* byte */
209 u32 more_packets:1;
210 u32 reserved2:1;
211 u32 porth:2;
212 u32 portg:2;
213 u32 portf:2;
214 } __attribute__((packed));
216 #else
217 #error What? PDP endian?
218 #endif /* __BIG_ENDIAN_BITFIELD */
220 #endif /* _IEEE1394_IEEE1394_H */