[PATCH] arch/i386/mach-voyager/voyager_cat.c: named initializers

[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / fs / splice.c

/*
 * "splice": joining two ropes together by interweaving their strands.
 *
 * This is the "extended pipe" functionality, where a pipe is used as
 * an arbitrary in-memory buffer. Think of a pipe as a small kernel
 * buffer that you can use to transfer data from one end to the other.
 *
 * The traditional unix read/write is extended with a "splice()" operation
 * that transfers data buffers to or from a pipe buffer.
 *
 * Named by Larry McVoy, original implementation from Linus, extended by
 * Jens to support splicing to files and fixing the initial implementation
 * bugs.
 *
 * Copyright (C) 2005 Jens Axboe <axboe@suse.de>
 * Copyright (C) 2005 Linus Torvalds <torvalds@osdl.org>
 *
 */
#include <linux/fs.h>
#include <linux/file.h>
#include <linux/pagemap.h>
#include <linux/pipe_fs_i.h>
#include <linux/mm_inline.h>
#include <linux/swap.h>
#include <linux/writeback.h>
#include <linux/buffer_head.h>
#include <linux/module.h>
#include <linux/syscalls.h>

/*
 * Passed to the actors
 */
struct splice_desc {
        unsigned int len, total_len;    /* current and remaining length */
        unsigned int flags;             /* splice flags */
        struct file *file;              /* file to read/write */
        loff_t pos;                     /* file position */
};

/*
 * Attempt to steal a page from a pipe buffer. This should perhaps go into
 * a vm helper function, it's already simplified quite a bit by the
 * addition of remove_mapping(). If success is returned, the caller may
 * attempt to reuse this page for another destination.
 */
static int page_cache_pipe_buf_steal(struct pipe_inode_info *info,
                                     struct pipe_buffer *buf)
{
        struct page *page = buf->page;
        struct address_space *mapping = page_mapping(page);

        WARN_ON(!PageLocked(page));
        WARN_ON(!PageUptodate(page));

        /*
         * At least for ext2 with nobh option, we need to wait on writeback
         * completing on this page, since we'll remove it from the pagecache.
         * Otherwise truncate wont wait on the page, allowing the disk
         * blocks to be reused by someone else before we actually wrote our
         * data to them. fs corruption ensues.
         */
        wait_on_page_writeback(page);

        if (PagePrivate(page))
                try_to_release_page(page, mapping_gfp_mask(mapping));

        if (!remove_mapping(mapping, page))
                return 1;

        buf->flags |= PIPE_BUF_FLAG_STOLEN | PIPE_BUF_FLAG_LRU;
        return 0;
}

static void page_cache_pipe_buf_release(struct pipe_inode_info *info,
                                        struct pipe_buffer *buf)
{
        page_cache_release(buf->page);
        buf->page = NULL;
        buf->flags &= ~(PIPE_BUF_FLAG_STOLEN | PIPE_BUF_FLAG_LRU);
}

static void *page_cache_pipe_buf_map(struct file *file,
                                     struct pipe_inode_info *info,
                                     struct pipe_buffer *buf)
{
        struct page *page = buf->page;

        lock_page(page);

        if (!PageUptodate(page)) {
                unlock_page(page);
                return ERR_PTR(-EIO);
        }

        if (!page->mapping) {
                unlock_page(page);
                return ERR_PTR(-ENODATA);
        }

        return kmap(buf->page);
}

static void page_cache_pipe_buf_unmap(struct pipe_inode_info *info,
                                      struct pipe_buffer *buf)
{
        unlock_page(buf->page);
        kunmap(buf->page);
}

static struct pipe_buf_operations page_cache_pipe_buf_ops = {
        .can_merge = 0,
        .map = page_cache_pipe_buf_map,
        .unmap = page_cache_pipe_buf_unmap,
        .release = page_cache_pipe_buf_release,
        .steal = page_cache_pipe_buf_steal,
};

/*
 * Pipe output worker. This sets up our pipe format with the page cache
 * pipe buffer operations. Otherwise very similar to the regular pipe_writev().
 */
static ssize_t move_to_pipe(struct inode *inode, struct page **pages,
                            int nr_pages, unsigned long offset,
                            unsigned long len, unsigned int flags)
{
        struct pipe_inode_info *info;
        int ret, do_wakeup, i;

        ret = 0;
        do_wakeup = 0;
        i = 0;

        mutex_lock(PIPE_MUTEX(*inode));

        info = inode->i_pipe;
        for (;;) {
                int bufs;

                if (!PIPE_READERS(*inode)) {
                        send_sig(SIGPIPE, current, 0);
                        if (!ret)
                                ret = -EPIPE;
                        break;
                }

                bufs = info->nrbufs;
                if (bufs < PIPE_BUFFERS) {
                        int newbuf = (info->curbuf + bufs) & (PIPE_BUFFERS - 1);
                        struct pipe_buffer *buf = info->bufs + newbuf;
                        struct page *page = pages[i++];
                        unsigned long this_len;

                        this_len = PAGE_CACHE_SIZE - offset;
                        if (this_len > len)
                                this_len = len;

                        buf->page = page;
                        buf->offset = offset;
                        buf->len = this_len;
                        buf->ops = &page_cache_pipe_buf_ops;
                        info->nrbufs = ++bufs;
                        do_wakeup = 1;

                        ret += this_len;
                        len -= this_len;
                        offset = 0;
                        if (!--nr_pages)
                                break;
                        if (!len)
                                break;
                        if (bufs < PIPE_BUFFERS)
                                continue;

                        break;
                }

                if (flags & SPLICE_F_NONBLOCK) {
                        if (!ret)
                                ret = -EAGAIN;
                        break;
                }

                if (signal_pending(current)) {
                        if (!ret)
                                ret = -ERESTARTSYS;
                        break;
                }

                if (do_wakeup) {
                        wake_up_interruptible_sync(PIPE_WAIT(*inode));
                        kill_fasync(PIPE_FASYNC_READERS(*inode), SIGIO,
                                    POLL_IN);
                        do_wakeup = 0;
                }

                PIPE_WAITING_WRITERS(*inode)++;
                pipe_wait(inode);
                PIPE_WAITING_WRITERS(*inode)--;
        }

        mutex_unlock(PIPE_MUTEX(*inode));

        if (do_wakeup) {
                wake_up_interruptible(PIPE_WAIT(*inode));
                kill_fasync(PIPE_FASYNC_READERS(*inode), SIGIO, POLL_IN);
        }

        while (i < nr_pages)
                page_cache_release(pages[i++]);

        return ret;
}

static int __generic_file_splice_read(struct file *in, struct inode *pipe,
                                      size_t len, unsigned int flags)
{
        struct address_space *mapping = in->f_mapping;
        unsigned int offset, nr_pages;
        struct page *pages[PIPE_BUFFERS], *shadow[PIPE_BUFFERS];
        struct page *page;
        pgoff_t index, pidx;
        int i, j;

        index = in->f_pos >> PAGE_CACHE_SHIFT;
        offset = in->f_pos & ~PAGE_CACHE_MASK;
        nr_pages = (len + offset + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;

        if (nr_pages > PIPE_BUFFERS)
                nr_pages = PIPE_BUFFERS;

        /*
         * initiate read-ahead on this page range
         */
        do_page_cache_readahead(mapping, in, index, nr_pages);

        /*
         * Get as many pages from the page cache as possible..
         * Start IO on the page cache entries we create (we
         * can assume that any pre-existing ones we find have
         * already had IO started on them).
         */
        i = find_get_pages(mapping, index, nr_pages, pages);

        /*
         * common case - we found all pages and they are contiguous,
         * kick them off
         */
        if (i && (pages[i - 1]->index == index + i - 1))
                goto splice_them;

        /*
         * fill shadow[] with pages at the right locations, so we only
         * have to fill holes
         */
        memset(shadow, 0, nr_pages * sizeof(struct page *));
        for (j = 0; j < i; j++)
                shadow[pages[j]->index - index] = pages[j];

        /*
         * now fill in the holes
         */
        for (i = 0, pidx = index; i < nr_pages; pidx++, i++) {
                int error;

                if (shadow[i])
                        continue;

                /*
                 * no page there, look one up / create it
                 */
                page = find_or_create_page(mapping, pidx,
                                                   mapping_gfp_mask(mapping));
                if (!page)
                        break;

                if (PageUptodate(page))
                        unlock_page(page);
                else {
                        error = mapping->a_ops->readpage(in, page);

                        if (unlikely(error)) {
                                page_cache_release(page);
                                break;
                        }
                }
                shadow[i] = page;
        }

        if (!i) {
                for (i = 0; i < nr_pages; i++) {
                         if (shadow[i])
                                page_cache_release(shadow[i]);
                }
                return 0;
        }

        memcpy(pages, shadow, i * sizeof(struct page *));

        /*
         * Now we splice them into the pipe..
         */
splice_them:
        return move_to_pipe(pipe, pages, i, offset, len, flags);
}

/**
 * generic_file_splice_read - splice data from file to a pipe
 * @in:         file to splice from
 * @pipe:       pipe to splice to
 * @len:        number of bytes to splice
 * @flags:      splice modifier flags
 *
 * Will read pages from given file and fill them into a pipe.
 *
 */
ssize_t generic_file_splice_read(struct file *in, struct inode *pipe,
                                 size_t len, unsigned int flags)
{
        ssize_t spliced;
        int ret;

        ret = 0;
        spliced = 0;
        while (len) {
                ret = __generic_file_splice_read(in, pipe, len, flags);

                if (ret <= 0)
                        break;

                in->f_pos += ret;
                len -= ret;
                spliced += ret;

                if (!(flags & SPLICE_F_NONBLOCK))
                        continue;
                ret = -EAGAIN;
                break;
        }

        if (spliced)
                return spliced;

        return ret;
}

EXPORT_SYMBOL(generic_file_splice_read);

/*
 * Send 'sd->len' bytes to socket from 'sd->file' at position 'sd->pos'
 * using sendpage().
 */
static int pipe_to_sendpage(struct pipe_inode_info *info,
                            struct pipe_buffer *buf, struct splice_desc *sd)
{
        struct file *file = sd->file;
        loff_t pos = sd->pos;
        unsigned int offset;
        ssize_t ret;
        void *ptr;
        int more;

        /*
         * sub-optimal, but we are limited by the pipe ->map. we don't
         * need a kmap'ed buffer here, we just want to make sure we
         * have the page pinned if the pipe page originates from the
         * page cache
         */
        ptr = buf->ops->map(file, info, buf);
        if (IS_ERR(ptr))
                return PTR_ERR(ptr);

        offset = pos & ~PAGE_CACHE_MASK;
        more = (sd->flags & SPLICE_F_MORE) || sd->len < sd->total_len;

        ret = file->f_op->sendpage(file, buf->page, offset, sd->len, &pos,more);

        buf->ops->unmap(info, buf);
        if (ret == sd->len)
                return 0;

        return -EIO;
}

/*
 * This is a little more tricky than the file -> pipe splicing. There are
 * basically three cases:
 *
 *      - Destination page already exists in the address space and there
 *        are users of it. For that case we have no other option that
 *        copying the data. Tough luck.
 *      - Destination page already exists in the address space, but there
 *        are no users of it. Make sure it's uptodate, then drop it. Fall
 *        through to last case.
 *      - Destination page does not exist, we can add the pipe page to
 *        the page cache and avoid the copy.
 *
 * If asked to move pages to the output file (SPLICE_F_MOVE is set in
 * sd->flags), we attempt to migrate pages from the pipe to the output
 * file address space page cache. This is possible if no one else has
 * the pipe page referenced outside of the pipe and page cache. If
 * SPLICE_F_MOVE isn't set, or we cannot move the page, we simply create
 * a new page in the output file page cache and fill/dirty that.
 */
static int pipe_to_file(struct pipe_inode_info *info, struct pipe_buffer *buf,
                        struct splice_desc *sd)
{
        struct file *file = sd->file;
        struct address_space *mapping = file->f_mapping;
        gfp_t gfp_mask = mapping_gfp_mask(mapping);
        unsigned int offset;
        struct page *page;
        pgoff_t index;
        char *src;
        int ret;

        /*
         * after this, page will be locked and unmapped
         */
        src = buf->ops->map(file, info, buf);
        if (IS_ERR(src))
                return PTR_ERR(src);

        index = sd->pos >> PAGE_CACHE_SHIFT;
        offset = sd->pos & ~PAGE_CACHE_MASK;

        /*
         * reuse buf page, if SPLICE_F_MOVE is set
         */
        if (sd->flags & SPLICE_F_MOVE) {
                /*
                 * If steal succeeds, buf->page is now pruned from the vm
                 * side (LRU and page cache) and we can reuse it.
                 */
                if (buf->ops->steal(info, buf))
                        goto find_page;

                page = buf->page;
                if (add_to_page_cache(page, mapping, index, gfp_mask))
                        goto find_page;

                if (!(buf->flags & PIPE_BUF_FLAG_LRU))
                        lru_cache_add(page);
        } else {
find_page:
                ret = -ENOMEM;
                page = find_or_create_page(mapping, index, gfp_mask);
                if (!page)
                        goto out;

                /*
                 * If the page is uptodate, it is also locked. If it isn't
                 * uptodate, we can mark it uptodate if we are filling the
                 * full page. Otherwise we need to read it in first...
                 */
                if (!PageUptodate(page)) {
                        if (sd->len < PAGE_CACHE_SIZE) {
                                ret = mapping->a_ops->readpage(file, page);
                                if (unlikely(ret))
                                        goto out;

                                lock_page(page);

                                if (!PageUptodate(page)) {
                                        /*
                                         * page got invalidated, repeat
                                         */
                                        if (!page->mapping) {
                                                unlock_page(page);
                                                page_cache_release(page);
                                                goto find_page;
                                        }
                                        ret = -EIO;
                                        goto out;
                                }
                        } else {
                                WARN_ON(!PageLocked(page));
                                SetPageUptodate(page);
                        }
                }
        }

        ret = mapping->a_ops->prepare_write(file, page, 0, sd->len);
        if (ret == AOP_TRUNCATED_PAGE) {
                page_cache_release(page);
                goto find_page;
        } else if (ret)
                goto out;

        if (!(buf->flags & PIPE_BUF_FLAG_STOLEN)) {
                char *dst = kmap_atomic(page, KM_USER0);

                memcpy(dst + offset, src + buf->offset, sd->len);
                flush_dcache_page(page);
                kunmap_atomic(dst, KM_USER0);
        }

        ret = mapping->a_ops->commit_write(file, page, 0, sd->len);
        if (ret == AOP_TRUNCATED_PAGE) {
                page_cache_release(page);
                goto find_page;
        } else if (ret)
                goto out;

        balance_dirty_pages_ratelimited(mapping);
out:
        if (!(buf->flags & PIPE_BUF_FLAG_STOLEN)) {
                page_cache_release(page);
                unlock_page(page);
        }
        buf->ops->unmap(info, buf);
        return ret;
}

typedef int (splice_actor)(struct pipe_inode_info *, struct pipe_buffer *,
                           struct splice_desc *);

/*
 * Pipe input worker. Most of this logic works like a regular pipe, the
 * key here is the 'actor' worker passed in that actually moves the data
 * to the wanted destination. See pipe_to_file/pipe_to_sendpage above.
 */
static ssize_t move_from_pipe(struct inode *inode, struct file *out,
                              size_t len, unsigned int flags,
                              splice_actor *actor)
{
        struct pipe_inode_info *info;
        int ret, do_wakeup, err;
        struct splice_desc sd;

        ret = 0;
        do_wakeup = 0;

        sd.total_len = len;
        sd.flags = flags;
        sd.file = out;
        sd.pos = out->f_pos;

        mutex_lock(PIPE_MUTEX(*inode));

        info = inode->i_pipe;
        for (;;) {
                int bufs = info->nrbufs;

                if (bufs) {
                        int curbuf = info->curbuf;
                        struct pipe_buffer *buf = info->bufs + curbuf;
                        struct pipe_buf_operations *ops = buf->ops;

                        sd.len = buf->len;
                        if (sd.len > sd.total_len)
                                sd.len = sd.total_len;

                        err = actor(info, buf, &sd);
                        if (err) {
                                if (!ret && err != -ENODATA)
                                        ret = err;

                                break;
                        }

                        ret += sd.len;
                        buf->offset += sd.len;
                        buf->len -= sd.len;
                        if (!buf->len) {
                                buf->ops = NULL;
                                ops->release(info, buf);
                                curbuf = (curbuf + 1) & (PIPE_BUFFERS - 1);
                                info->curbuf = curbuf;
                                info->nrbufs = --bufs;
                                do_wakeup = 1;
                        }

                        sd.pos += sd.len;
                        sd.total_len -= sd.len;
                        if (!sd.total_len)
                                break;
                }

                if (bufs)
                        continue;
                if (!PIPE_WRITERS(*inode))
                        break;
                if (!PIPE_WAITING_WRITERS(*inode)) {
                        if (ret)
                                break;
                }

                if (flags & SPLICE_F_NONBLOCK) {
                        if (!ret)
                                ret = -EAGAIN;
                        break;
                }

                if (signal_pending(current)) {
                        if (!ret)
                                ret = -ERESTARTSYS;
                        break;
                }

                if (do_wakeup) {
                        wake_up_interruptible_sync(PIPE_WAIT(*inode));
                        kill_fasync(PIPE_FASYNC_WRITERS(*inode),SIGIO,POLL_OUT);
                        do_wakeup = 0;
                }

                pipe_wait(inode);
        }

        mutex_unlock(PIPE_MUTEX(*inode));

        if (do_wakeup) {
                wake_up_interruptible(PIPE_WAIT(*inode));
                kill_fasync(PIPE_FASYNC_WRITERS(*inode), SIGIO, POLL_OUT);
        }

        mutex_lock(&out->f_mapping->host->i_mutex);
        out->f_pos = sd.pos;
        mutex_unlock(&out->f_mapping->host->i_mutex);
        return ret;

}

/**
 * generic_file_splice_write - splice data from a pipe to a file
 * @inode:      pipe inode
 * @out:        file to write to
 * @len:        number of bytes to splice
 * @flags:      splice modifier flags
 *
 * Will either move or copy pages (determined by @flags options) from
 * the given pipe inode to the given file.
 *
 */
ssize_t generic_file_splice_write(struct inode *inode, struct file *out,
                                  size_t len, unsigned int flags)
{
        struct address_space *mapping = out->f_mapping;
        ssize_t ret = move_from_pipe(inode, out, len, flags, pipe_to_file);

        /*
         * if file or inode is SYNC and we actually wrote some data, sync it
         */
        if (unlikely((out->f_flags & O_SYNC) || IS_SYNC(mapping->host))
            && ret > 0) {
                struct inode *inode = mapping->host;
                int err;

                mutex_lock(&inode->i_mutex);
                err = generic_osync_inode(mapping->host, mapping,
                                                OSYNC_METADATA|OSYNC_DATA);
                mutex_unlock(&inode->i_mutex);

                if (err)
                        ret = err;
        }

        return ret;
}

EXPORT_SYMBOL(generic_file_splice_write);

/**
 * generic_splice_sendpage - splice data from a pipe to a socket
 * @inode:      pipe inode
 * @out:        socket to write to
 * @len:        number of bytes to splice
 * @flags:      splice modifier flags
 *
 * Will send @len bytes from the pipe to a network socket. No data copying
 * is involved.
 *
 */
ssize_t generic_splice_sendpage(struct inode *inode, struct file *out,
                                size_t len, unsigned int flags)
{
        return move_from_pipe(inode, out, len, flags, pipe_to_sendpage);
}

EXPORT_SYMBOL(generic_splice_sendpage);

/*
 * Attempt to initiate a splice from pipe to file.
 */
static long do_splice_from(struct inode *pipe, struct file *out, size_t len,
                           unsigned int flags)
{
        loff_t pos;
        int ret;

        if (!out->f_op || !out->f_op->splice_write)
                return -EINVAL;

        if (!(out->f_mode & FMODE_WRITE))
                return -EBADF;

        pos = out->f_pos;
        ret = rw_verify_area(WRITE, out, &pos, len);
        if (unlikely(ret < 0))
                return ret;

        return out->f_op->splice_write(pipe, out, len, flags);
}

/*
 * Attempt to initiate a splice from a file to a pipe.
 */
static long do_splice_to(struct file *in, struct inode *pipe, size_t len,
                         unsigned int flags)
{
        loff_t pos, isize, left;
        int ret;

        if (!in->f_op || !in->f_op->splice_read)
                return -EINVAL;

        if (!(in->f_mode & FMODE_READ))
                return -EBADF;

        pos = in->f_pos;
        ret = rw_verify_area(READ, in, &pos, len);
        if (unlikely(ret < 0))
                return ret;

        isize = i_size_read(in->f_mapping->host);
        if (unlikely(in->f_pos >= isize))
                return 0;
        
        left = isize - in->f_pos;
        if (left < len)
                len = left;

        return in->f_op->splice_read(in, pipe, len, flags);
}

/*
 * Determine where to splice to/from.
 */
static long do_splice(struct file *in, struct file *out, size_t len,
                      unsigned int flags)
{
        struct inode *pipe;

        pipe = in->f_dentry->d_inode;
        if (pipe->i_pipe)
                return do_splice_from(pipe, out, len, flags);

        pipe = out->f_dentry->d_inode;
        if (pipe->i_pipe)
                return do_splice_to(in, pipe, len, flags);

        return -EINVAL;
}

asmlinkage long sys_splice(int fdin, int fdout, size_t len, unsigned int flags)
{
        long error;
        struct file *in, *out;
        int fput_in, fput_out;

        if (unlikely(!len))
                return 0;

        error = -EBADF;
        in = fget_light(fdin, &fput_in);
        if (in) {
                if (in->f_mode & FMODE_READ) {
                        out = fget_light(fdout, &fput_out);
                        if (out) {
                                if (out->f_mode & FMODE_WRITE)
                                        error = do_splice(in, out, len, flags);
                                fput_light(out, fput_out);
                        }
                }

                fput_light(in, fput_in);
        }

        return error;
}