Documentation: configfs examples crash fix

[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / mmc / host / tmio_mmc_pio.c

/*
 * linux/drivers/mmc/host/tmio_mmc_pio.c
 *
 * Copyright (C) 2011 Guennadi Liakhovetski
 * Copyright (C) 2007 Ian Molton
 * Copyright (C) 2004 Ian Molton
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * Driver for the MMC / SD / SDIO IP found in:
 *
 * TC6393XB, TC6391XB, TC6387XB, T7L66XB, ASIC3, SH-Mobile SoCs
 *
 * This driver draws mainly on scattered spec sheets, Reverse engineering
 * of the toshiba e800  SD driver and some parts of the 2.4 ASIC3 driver (4 bit
 * support). (Further 4 bit support from a later datasheet).
 *
 * TODO:
 *   Investigate using a workqueue for PIO transfers
 *   Eliminate FIXMEs
 *   SDIO support
 *   Better Power management
 *   Handle MMC errors better
 *   double buffer support
 *
 */

#include <linux/delay.h>
#include <linux/device.h>
#include <linux/highmem.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/mfd/tmio.h>
#include <linux/mmc/host.h>
#include <linux/mmc/tmio.h>
#include <linux/module.h>
#include <linux/pagemap.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/scatterlist.h>
#include <linux/workqueue.h>
#include <linux/spinlock.h>

#include "tmio_mmc.h"

static u16 sd_ctrl_read16(struct tmio_mmc_host *host, int addr)
{
        return readw(host->ctl + (addr << host->bus_shift));
}

static void sd_ctrl_read16_rep(struct tmio_mmc_host *host, int addr,
                u16 *buf, int count)
{
        readsw(host->ctl + (addr << host->bus_shift), buf, count);
}

static u32 sd_ctrl_read32(struct tmio_mmc_host *host, int addr)
{
        return readw(host->ctl + (addr << host->bus_shift)) |
               readw(host->ctl + ((addr + 2) << host->bus_shift)) << 16;
}

static void sd_ctrl_write16(struct tmio_mmc_host *host, int addr, u16 val)
{
        writew(val, host->ctl + (addr << host->bus_shift));
}

static void sd_ctrl_write16_rep(struct tmio_mmc_host *host, int addr,
                u16 *buf, int count)
{
        writesw(host->ctl + (addr << host->bus_shift), buf, count);
}

static void sd_ctrl_write32(struct tmio_mmc_host *host, int addr, u32 val)
{
        writew(val, host->ctl + (addr << host->bus_shift));
        writew(val >> 16, host->ctl + ((addr + 2) << host->bus_shift));
}

void tmio_mmc_enable_mmc_irqs(struct tmio_mmc_host *host, u32 i)
{
        u32 mask = sd_ctrl_read32(host, CTL_IRQ_MASK) & ~(i & TMIO_MASK_IRQ);
        sd_ctrl_write32(host, CTL_IRQ_MASK, mask);
}

void tmio_mmc_disable_mmc_irqs(struct tmio_mmc_host *host, u32 i)
{
        u32 mask = sd_ctrl_read32(host, CTL_IRQ_MASK) | (i & TMIO_MASK_IRQ);
        sd_ctrl_write32(host, CTL_IRQ_MASK, mask);
}

static void tmio_mmc_ack_mmc_irqs(struct tmio_mmc_host *host, u32 i)
{
        sd_ctrl_write32(host, CTL_STATUS, ~i);
}

static void tmio_mmc_init_sg(struct tmio_mmc_host *host, struct mmc_data *data)
{
        host->sg_len = data->sg_len;
        host->sg_ptr = data->sg;
        host->sg_orig = data->sg;
        host->sg_off = 0;
}

static int tmio_mmc_next_sg(struct tmio_mmc_host *host)
{
        host->sg_ptr = sg_next(host->sg_ptr);
        host->sg_off = 0;
        return --host->sg_len;
}

#ifdef CONFIG_MMC_DEBUG

#define STATUS_TO_TEXT(a, status, i) \
        do { \
                if (status & TMIO_STAT_##a) { \
                        if (i++) \
                                printk(" | "); \
                        printk(#a); \
                } \
        } while (0)

static void pr_debug_status(u32 status)
{
        int i = 0;
        printk(KERN_DEBUG "status: %08x = ", status);
        STATUS_TO_TEXT(CARD_REMOVE, status, i);
        STATUS_TO_TEXT(CARD_INSERT, status, i);
        STATUS_TO_TEXT(SIGSTATE, status, i);
        STATUS_TO_TEXT(WRPROTECT, status, i);
        STATUS_TO_TEXT(CARD_REMOVE_A, status, i);
        STATUS_TO_TEXT(CARD_INSERT_A, status, i);
        STATUS_TO_TEXT(SIGSTATE_A, status, i);
        STATUS_TO_TEXT(CMD_IDX_ERR, status, i);
        STATUS_TO_TEXT(STOPBIT_ERR, status, i);
        STATUS_TO_TEXT(ILL_FUNC, status, i);
        STATUS_TO_TEXT(CMD_BUSY, status, i);
        STATUS_TO_TEXT(CMDRESPEND, status, i);
        STATUS_TO_TEXT(DATAEND, status, i);
        STATUS_TO_TEXT(CRCFAIL, status, i);
        STATUS_TO_TEXT(DATATIMEOUT, status, i);
        STATUS_TO_TEXT(CMDTIMEOUT, status, i);
        STATUS_TO_TEXT(RXOVERFLOW, status, i);
        STATUS_TO_TEXT(TXUNDERRUN, status, i);
        STATUS_TO_TEXT(RXRDY, status, i);
        STATUS_TO_TEXT(TXRQ, status, i);
        STATUS_TO_TEXT(ILL_ACCESS, status, i);
        printk("\n");
}

#else
#define pr_debug_status(s)  do { } while (0)
#endif

static void tmio_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
{
        struct tmio_mmc_host *host = mmc_priv(mmc);

        if (enable) {
                host->sdio_irq_enabled = 1;
                sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0001);
                sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK,
                        (TMIO_SDIO_MASK_ALL & ~TMIO_SDIO_STAT_IOIRQ));
        } else {
                sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, TMIO_SDIO_MASK_ALL);
                sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0000);
                host->sdio_irq_enabled = 0;
        }
}

static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock)
{
        u32 clk = 0, clock;

        if (new_clock) {
                for (clock = host->mmc->f_min, clk = 0x80000080;
                        new_clock >= (clock<<1); clk >>= 1)
                        clock <<= 1;
                clk |= 0x100;
        }

        if (host->set_clk_div)
                host->set_clk_div(host->pdev, (clk>>22) & 1);

        sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & 0x1ff);
}

static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)
{
        struct resource *res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);

        /* implicit BUG_ON(!res) */
        if (resource_size(res) > 0x100) {
                sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0000);
                msleep(10);
        }

        sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~0x0100 &
                sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
        msleep(10);
}

static void tmio_mmc_clk_start(struct tmio_mmc_host *host)
{
        struct resource *res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);

        sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, 0x0100 |
                sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
        msleep(10);

        /* implicit BUG_ON(!res) */
        if (resource_size(res) > 0x100) {
                sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100);
                msleep(10);
        }
}

static void tmio_mmc_reset(struct tmio_mmc_host *host)
{
        struct resource *res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);

        /* FIXME - should we set stop clock reg here */
        sd_ctrl_write16(host, CTL_RESET_SD, 0x0000);
        /* implicit BUG_ON(!res) */
        if (resource_size(res) > 0x100)
                sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0000);
        msleep(10);
        sd_ctrl_write16(host, CTL_RESET_SD, 0x0001);
        if (resource_size(res) > 0x100)
                sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0001);
        msleep(10);
}

static void tmio_mmc_reset_work(struct work_struct *work)
{
        struct tmio_mmc_host *host = container_of(work, struct tmio_mmc_host,
                                                  delayed_reset_work.work);
        struct mmc_request *mrq;
        unsigned long flags;

        spin_lock_irqsave(&host->lock, flags);
        mrq = host->mrq;

        /*
         * is request already finished? Since we use a non-blocking
         * cancel_delayed_work(), it can happen, that a .set_ios() call preempts
         * us, so, have to check for IS_ERR(host->mrq)
         */
        if (IS_ERR_OR_NULL(mrq)
            || time_is_after_jiffies(host->last_req_ts +
                msecs_to_jiffies(2000))) {
                spin_unlock_irqrestore(&host->lock, flags);
                return;
        }

        dev_warn(&host->pdev->dev,
                "timeout waiting for hardware interrupt (CMD%u)\n",
                mrq->cmd->opcode);

        if (host->data)
                host->data->error = -ETIMEDOUT;
        else if (host->cmd)
                host->cmd->error = -ETIMEDOUT;
        else
                mrq->cmd->error = -ETIMEDOUT;

        host->cmd = NULL;
        host->data = NULL;
        host->force_pio = false;

        spin_unlock_irqrestore(&host->lock, flags);

        tmio_mmc_reset(host);

        /* Ready for new calls */
        host->mrq = NULL;

        mmc_request_done(host->mmc, mrq);
}

/* called with host->lock held, interrupts disabled */
static void tmio_mmc_finish_request(struct tmio_mmc_host *host)
{
        struct mmc_request *mrq = host->mrq;

        if (!mrq)
                return;

        host->cmd = NULL;
        host->data = NULL;
        host->force_pio = false;

        cancel_delayed_work(&host->delayed_reset_work);

        host->mrq = NULL;

        /* FIXME: mmc_request_done() can schedule! */
        mmc_request_done(host->mmc, mrq);
}

/* These are the bitmasks the tmio chip requires to implement the MMC response
 * types. Note that R1 and R6 are the same in this scheme. */
#define APP_CMD        0x0040
#define RESP_NONE      0x0300
#define RESP_R1        0x0400
#define RESP_R1B       0x0500
#define RESP_R2        0x0600
#define RESP_R3        0x0700
#define DATA_PRESENT   0x0800
#define TRANSFER_READ  0x1000
#define TRANSFER_MULTI 0x2000
#define SECURITY_CMD   0x4000

static int tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd)
{
        struct mmc_data *data = host->data;
        int c = cmd->opcode;

        /* Command 12 is handled by hardware */
        if (cmd->opcode == 12 && !cmd->arg) {
                sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x001);
                return 0;
        }

        switch (mmc_resp_type(cmd)) {
        case MMC_RSP_NONE: c |= RESP_NONE; break;
        case MMC_RSP_R1:   c |= RESP_R1;   break;
        case MMC_RSP_R1B:  c |= RESP_R1B;  break;
        case MMC_RSP_R2:   c |= RESP_R2;   break;
        case MMC_RSP_R3:   c |= RESP_R3;   break;
        default:
                pr_debug("Unknown response type %d\n", mmc_resp_type(cmd));
                return -EINVAL;
        }

        host->cmd = cmd;

/* FIXME - this seems to be ok commented out but the spec suggest this bit
 *         should be set when issuing app commands.
 *      if(cmd->flags & MMC_FLAG_ACMD)
 *              c |= APP_CMD;
 */
        if (data) {
                c |= DATA_PRESENT;
                if (data->blocks > 1) {
                        sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x100);
                        c |= TRANSFER_MULTI;
                }
                if (data->flags & MMC_DATA_READ)
                        c |= TRANSFER_READ;
        }

        tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_CMD);

        /* Fire off the command */
        sd_ctrl_write32(host, CTL_ARG_REG, cmd->arg);
        sd_ctrl_write16(host, CTL_SD_CMD, c);

        return 0;
}

/*
 * This chip always returns (at least?) as much data as you ask for.
 * I'm unsure what happens if you ask for less than a block. This should be
 * looked into to ensure that a funny length read doesn't hose the controller.
 */
static void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
{
        struct mmc_data *data = host->data;
        void *sg_virt;
        unsigned short *buf;
        unsigned int count;
        unsigned long flags;

        if ((host->chan_tx || host->chan_rx) && !host->force_pio) {
                pr_err("PIO IRQ in DMA mode!\n");
                return;
        } else if (!data) {
                pr_debug("Spurious PIO IRQ\n");
                return;
        }

        sg_virt = tmio_mmc_kmap_atomic(host->sg_ptr, &flags);
        buf = (unsigned short *)(sg_virt + host->sg_off);

        count = host->sg_ptr->length - host->sg_off;
        if (count > data->blksz)
                count = data->blksz;

        pr_debug("count: %08x offset: %08x flags %08x\n",
                 count, host->sg_off, data->flags);

        /* Transfer the data */
        if (data->flags & MMC_DATA_READ)
                sd_ctrl_read16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
        else
                sd_ctrl_write16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);

        host->sg_off += count;

        tmio_mmc_kunmap_atomic(host->sg_ptr, &flags, sg_virt);

        if (host->sg_off == host->sg_ptr->length)
                tmio_mmc_next_sg(host);

        return;
}

static void tmio_mmc_check_bounce_buffer(struct tmio_mmc_host *host)
{
        if (host->sg_ptr == &host->bounce_sg) {
                unsigned long flags;
                void *sg_vaddr = tmio_mmc_kmap_atomic(host->sg_orig, &flags);
                memcpy(sg_vaddr, host->bounce_buf, host->bounce_sg.length);
                tmio_mmc_kunmap_atomic(host->sg_orig, &flags, sg_vaddr);
        }
}

/* needs to be called with host->lock held */
void tmio_mmc_do_data_irq(struct tmio_mmc_host *host)
{
        struct mmc_data *data = host->data;
        struct mmc_command *stop;

        host->data = NULL;

        if (!data) {
                dev_warn(&host->pdev->dev, "Spurious data end IRQ\n");
                return;
        }
        stop = data->stop;

        /* FIXME - return correct transfer count on errors */
        if (!data->error)
                data->bytes_xfered = data->blocks * data->blksz;
        else
                data->bytes_xfered = 0;

        pr_debug("Completed data request\n");

        /*
         * FIXME: other drivers allow an optional stop command of any given type
         *        which we dont do, as the chip can auto generate them.
         *        Perhaps we can be smarter about when to use auto CMD12 and
         *        only issue the auto request when we know this is the desired
         *        stop command, allowing fallback to the stop command the
         *        upper layers expect. For now, we do what works.
         */

        if (data->flags & MMC_DATA_READ) {
                if (host->chan_rx && !host->force_pio)
                        tmio_mmc_check_bounce_buffer(host);
                dev_dbg(&host->pdev->dev, "Complete Rx request %p\n",
                        host->mrq);
        } else {
                dev_dbg(&host->pdev->dev, "Complete Tx request %p\n",
                        host->mrq);
        }

        if (stop) {
                if (stop->opcode == 12 && !stop->arg)
                        sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x000);
                else
                        BUG();
        }

        tmio_mmc_finish_request(host);
}

static void tmio_mmc_data_irq(struct tmio_mmc_host *host)
{
        struct mmc_data *data;
        spin_lock(&host->lock);
        data = host->data;

        if (!data)
                goto out;

        if (host->chan_tx && (data->flags & MMC_DATA_WRITE) && !host->force_pio) {
                /*
                 * Has all data been written out yet? Testing on SuperH showed,
                 * that in most cases the first interrupt comes already with the
                 * BUSY status bit clear, but on some operations, like mount or
                 * in the beginning of a write / sync / umount, there is one
                 * DATAEND interrupt with the BUSY bit set, in this cases
                 * waiting for one more interrupt fixes the problem.
                 */
                if (!(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_CMD_BUSY)) {
                        tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND);
                        tasklet_schedule(&host->dma_complete);
                }
        } else if (host->chan_rx && (data->flags & MMC_DATA_READ) && !host->force_pio) {
                tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND);
                tasklet_schedule(&host->dma_complete);
        } else {
                tmio_mmc_do_data_irq(host);
                tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_READOP | TMIO_MASK_WRITEOP);
        }
out:
        spin_unlock(&host->lock);
}

static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
        unsigned int stat)
{
        struct mmc_command *cmd = host->cmd;
        int i, addr;

        spin_lock(&host->lock);

        if (!host->cmd) {
                pr_debug("Spurious CMD irq\n");
                goto out;
        }

        host->cmd = NULL;

        /* This controller is sicker than the PXA one. Not only do we need to
         * drop the top 8 bits of the first response word, we also need to
         * modify the order of the response for short response command types.
         */

        for (i = 3, addr = CTL_RESPONSE ; i >= 0 ; i--, addr += 4)
                cmd->resp[i] = sd_ctrl_read32(host, addr);

        if (cmd->flags &  MMC_RSP_136) {
                cmd->resp[0] = (cmd->resp[0] << 8) | (cmd->resp[1] >> 24);
                cmd->resp[1] = (cmd->resp[1] << 8) | (cmd->resp[2] >> 24);
                cmd->resp[2] = (cmd->resp[2] << 8) | (cmd->resp[3] >> 24);
                cmd->resp[3] <<= 8;
        } else if (cmd->flags & MMC_RSP_R3) {
                cmd->resp[0] = cmd->resp[3];
        }

        if (stat & TMIO_STAT_CMDTIMEOUT)
                cmd->error = -ETIMEDOUT;
        else if (stat & TMIO_STAT_CRCFAIL && cmd->flags & MMC_RSP_CRC)
                cmd->error = -EILSEQ;

        /* If there is data to handle we enable data IRQs here, and
         * we will ultimatley finish the request in the data_end handler.
         * If theres no data or we encountered an error, finish now.
         */
        if (host->data && !cmd->error) {
                if (host->data->flags & MMC_DATA_READ) {
                        if (host->force_pio || !host->chan_rx)
                                tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_READOP);
                        else
                                tasklet_schedule(&host->dma_issue);
                } else {
                        if (host->force_pio || !host->chan_tx)
                                tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_WRITEOP);
                        else
                                tasklet_schedule(&host->dma_issue);
                }
        } else {
                tmio_mmc_finish_request(host);
        }

out:
        spin_unlock(&host->lock);
}

irqreturn_t tmio_mmc_irq(int irq, void *devid)
{
        struct tmio_mmc_host *host = devid;
        struct tmio_mmc_data *pdata = host->pdata;
        unsigned int ireg, irq_mask, status;
        unsigned int sdio_ireg, sdio_irq_mask, sdio_status;

        pr_debug("MMC IRQ begin\n");

        status = sd_ctrl_read32(host, CTL_STATUS);
        irq_mask = sd_ctrl_read32(host, CTL_IRQ_MASK);
        ireg = status & TMIO_MASK_IRQ & ~irq_mask;

        sdio_ireg = 0;
        if (!ireg && pdata->flags & TMIO_MMC_SDIO_IRQ) {
                sdio_status = sd_ctrl_read16(host, CTL_SDIO_STATUS);
                sdio_irq_mask = sd_ctrl_read16(host, CTL_SDIO_IRQ_MASK);
                sdio_ireg = sdio_status & TMIO_SDIO_MASK_ALL & ~sdio_irq_mask;

                sd_ctrl_write16(host, CTL_SDIO_STATUS, sdio_status & ~TMIO_SDIO_MASK_ALL);

                if (sdio_ireg && !host->sdio_irq_enabled) {
                        pr_warning("tmio_mmc: Spurious SDIO IRQ, disabling! 0x%04x 0x%04x 0x%04x\n",
                                   sdio_status, sdio_irq_mask, sdio_ireg);
                        tmio_mmc_enable_sdio_irq(host->mmc, 0);
                        goto out;
                }

                if (host->mmc->caps & MMC_CAP_SDIO_IRQ &&
                        sdio_ireg & TMIO_SDIO_STAT_IOIRQ)
                        mmc_signal_sdio_irq(host->mmc);

                if (sdio_ireg)
                        goto out;
        }

        pr_debug_status(status);
        pr_debug_status(ireg);

        if (!ireg) {
                tmio_mmc_disable_mmc_irqs(host, status & ~irq_mask);

                pr_warning("tmio_mmc: Spurious irq, disabling! "
                        "0x%08x 0x%08x 0x%08x\n", status, irq_mask, ireg);
                pr_debug_status(status);

                goto out;
        }

        while (ireg) {
                /* Card insert / remove attempts */
                if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)) {
                        tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_CARD_INSERT |
                                TMIO_STAT_CARD_REMOVE);
                        mmc_detect_change(host->mmc, msecs_to_jiffies(100));
                }

                /* CRC and other errors */
/*              if (ireg & TMIO_STAT_ERR_IRQ)
 *                      handled |= tmio_error_irq(host, irq, stat);
 */

                /* Command completion */
                if (ireg & (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT)) {
                        tmio_mmc_ack_mmc_irqs(host,
                                     TMIO_STAT_CMDRESPEND |
                                     TMIO_STAT_CMDTIMEOUT);
                        tmio_mmc_cmd_irq(host, status);
                }

                /* Data transfer */
                if (ireg & (TMIO_STAT_RXRDY | TMIO_STAT_TXRQ)) {
                        tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ);
                        tmio_mmc_pio_irq(host);
                }

                /* Data transfer completion */
                if (ireg & TMIO_STAT_DATAEND) {
                        tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_DATAEND);
                        tmio_mmc_data_irq(host);
                }

                /* Check status - keep going until we've handled it all */
                status = sd_ctrl_read32(host, CTL_STATUS);
                irq_mask = sd_ctrl_read32(host, CTL_IRQ_MASK);
                ireg = status & TMIO_MASK_IRQ & ~irq_mask;

                pr_debug("Status at end of loop: %08x\n", status);
                pr_debug_status(status);
        }
        pr_debug("MMC IRQ end\n");

out:
        return IRQ_HANDLED;
}
EXPORT_SYMBOL(tmio_mmc_irq);

static int tmio_mmc_start_data(struct tmio_mmc_host *host,
        struct mmc_data *data)
{
        struct tmio_mmc_data *pdata = host->pdata;

        pr_debug("setup data transfer: blocksize %08x  nr_blocks %d\n",
                 data->blksz, data->blocks);

        /* Some hardware cannot perform 2 byte requests in 4 bit mode */
        if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) {
                int blksz_2bytes = pdata->flags & TMIO_MMC_BLKSZ_2BYTES;

                if (data->blksz < 2 || (data->blksz < 4 && !blksz_2bytes)) {
                        pr_err("%s: %d byte block unsupported in 4 bit mode\n",
                               mmc_hostname(host->mmc), data->blksz);
                        return -EINVAL;
                }
        }

        tmio_mmc_init_sg(host, data);
        host->data = data;

        /* Set transfer length / blocksize */
        sd_ctrl_write16(host, CTL_SD_XFER_LEN, data->blksz);
        sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks);

        tmio_mmc_start_dma(host, data);

        return 0;
}

/* Process requests from the MMC layer */
static void tmio_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
{
        struct tmio_mmc_host *host = mmc_priv(mmc);
        unsigned long flags;
        int ret;

        spin_lock_irqsave(&host->lock, flags);

        if (host->mrq) {
                pr_debug("request not null\n");
                if (IS_ERR(host->mrq)) {
                        spin_unlock_irqrestore(&host->lock, flags);
                        mrq->cmd->error = -EAGAIN;
                        mmc_request_done(mmc, mrq);
                        return;
                }
        }

        host->last_req_ts = jiffies;
        wmb();
        host->mrq = mrq;

        spin_unlock_irqrestore(&host->lock, flags);

        if (mrq->data) {
                ret = tmio_mmc_start_data(host, mrq->data);
                if (ret)
                        goto fail;
        }

        ret = tmio_mmc_start_command(host, mrq->cmd);
        if (!ret) {
                schedule_delayed_work(&host->delayed_reset_work,
                                      msecs_to_jiffies(2000));
                return;
        }

fail:
        host->force_pio = false;
        host->mrq = NULL;
        mrq->cmd->error = ret;
        mmc_request_done(mmc, mrq);
}

/* Set MMC clock / power.
 * Note: This controller uses a simple divider scheme therefore it cannot
 * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as
 * MMC wont run that fast, it has to be clocked at 12MHz which is the next
 * slowest setting.
 */
static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
        struct tmio_mmc_host *host = mmc_priv(mmc);
        struct tmio_mmc_data *pdata = host->pdata;
        unsigned long flags;

        spin_lock_irqsave(&host->lock, flags);
        if (host->mrq) {
                if (IS_ERR(host->mrq)) {
                        dev_dbg(&host->pdev->dev,
                                "%s.%d: concurrent .set_ios(), clk %u, mode %u\n",
                                current->comm, task_pid_nr(current),
                                ios->clock, ios->power_mode);
                        host->mrq = ERR_PTR(-EINTR);
                } else {
                        dev_dbg(&host->pdev->dev,
                                "%s.%d: CMD%u active since %lu, now %lu!\n",
                                current->comm, task_pid_nr(current),
                                host->mrq->cmd->opcode, host->last_req_ts, jiffies);
                }
                spin_unlock_irqrestore(&host->lock, flags);
                return;
        }

        host->mrq = ERR_PTR(-EBUSY);

        spin_unlock_irqrestore(&host->lock, flags);

        if (ios->clock)
                tmio_mmc_set_clock(host, ios->clock);

        /* Power sequence - OFF -> UP -> ON */
        if (ios->power_mode == MMC_POWER_UP) {
                if ((pdata->flags & TMIO_MMC_HAS_COLD_CD) && !pdata->power) {
                        pm_runtime_get_sync(&host->pdev->dev);
                        pdata->power = true;
                }
                /* power up SD bus */
                if (host->set_pwr)
                        host->set_pwr(host->pdev, 1);
        } else if (ios->power_mode == MMC_POWER_OFF || !ios->clock) {
                /* power down SD bus */
                if (ios->power_mode == MMC_POWER_OFF) {
                        if (host->set_pwr)
                                host->set_pwr(host->pdev, 0);
                        if ((pdata->flags & TMIO_MMC_HAS_COLD_CD) &&
                            pdata->power) {
                                pdata->power = false;
                                pm_runtime_put(&host->pdev->dev);
                        }
                }
                tmio_mmc_clk_stop(host);
        } else {
                /* start bus clock */
                tmio_mmc_clk_start(host);
        }

        switch (ios->bus_width) {
        case MMC_BUS_WIDTH_1:
                sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0);
        break;
        case MMC_BUS_WIDTH_4:
                sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0);
        break;
        }

        /* Let things settle. delay taken from winCE driver */
        udelay(140);
        if (PTR_ERR(host->mrq) == -EINTR)
                dev_dbg(&host->pdev->dev,
                        "%s.%d: IOS interrupted: clk %u, mode %u",
                        current->comm, task_pid_nr(current),
                        ios->clock, ios->power_mode);
        host->mrq = NULL;
}

static int tmio_mmc_get_ro(struct mmc_host *mmc)
{
        struct tmio_mmc_host *host = mmc_priv(mmc);
        struct tmio_mmc_data *pdata = host->pdata;

        return ((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) ||
                !(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT));
}

static int tmio_mmc_get_cd(struct mmc_host *mmc)
{
        struct tmio_mmc_host *host = mmc_priv(mmc);
        struct tmio_mmc_data *pdata = host->pdata;

        if (!pdata->get_cd)
                return -ENOSYS;
        else
                return pdata->get_cd(host->pdev);
}

static const struct mmc_host_ops tmio_mmc_ops = {
        .request        = tmio_mmc_request,
        .set_ios        = tmio_mmc_set_ios,
        .get_ro         = tmio_mmc_get_ro,
        .get_cd         = tmio_mmc_get_cd,
        .enable_sdio_irq = tmio_mmc_enable_sdio_irq,
};

int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host,
                                  struct platform_device *pdev,
                                  struct tmio_mmc_data *pdata)
{
        struct tmio_mmc_host *_host;
        struct mmc_host *mmc;
        struct resource *res_ctl;
        int ret;
        u32 irq_mask = TMIO_MASK_CMD;

        res_ctl = platform_get_resource(pdev, IORESOURCE_MEM, 0);
        if (!res_ctl)
                return -EINVAL;

        mmc = mmc_alloc_host(sizeof(struct tmio_mmc_host), &pdev->dev);
        if (!mmc)
                return -ENOMEM;

        pdata->dev = &pdev->dev;
        _host = mmc_priv(mmc);
        _host->pdata = pdata;
        _host->mmc = mmc;
        _host->pdev = pdev;
        platform_set_drvdata(pdev, mmc);

        _host->set_pwr = pdata->set_pwr;
        _host->set_clk_div = pdata->set_clk_div;

        /* SD control register space size is 0x200, 0x400 for bus_shift=1 */
        _host->bus_shift = resource_size(res_ctl) >> 10;

        _host->ctl = ioremap(res_ctl->start, resource_size(res_ctl));
        if (!_host->ctl) {
                ret = -ENOMEM;
                goto host_free;
        }

        mmc->ops = &tmio_mmc_ops;
        mmc->caps = MMC_CAP_4_BIT_DATA | pdata->capabilities;
        mmc->f_max = pdata->hclk;
        mmc->f_min = mmc->f_max / 512;
        mmc->max_segs = 32;
        mmc->max_blk_size = 512;
        mmc->max_blk_count = (PAGE_CACHE_SIZE / mmc->max_blk_size) *
                mmc->max_segs;
        mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
        mmc->max_seg_size = mmc->max_req_size;
        if (pdata->ocr_mask)
                mmc->ocr_avail = pdata->ocr_mask;
        else
                mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;

        pdata->power = false;
        pm_runtime_enable(&pdev->dev);
        ret = pm_runtime_resume(&pdev->dev);
        if (ret < 0)
                goto pm_disable;

        tmio_mmc_clk_stop(_host);
        tmio_mmc_reset(_host);

        tmio_mmc_disable_mmc_irqs(_host, TMIO_MASK_ALL);
        if (pdata->flags & TMIO_MMC_SDIO_IRQ)
                tmio_mmc_enable_sdio_irq(mmc, 0);

        spin_lock_init(&_host->lock);

        /* Init delayed work for request timeouts */
        INIT_DELAYED_WORK(&_host->delayed_reset_work, tmio_mmc_reset_work);

        /* See if we also get DMA */
        tmio_mmc_request_dma(_host, pdata);

        /* We have to keep the device powered for its card detection to work */
        if (!(pdata->flags & TMIO_MMC_HAS_COLD_CD))
                pm_runtime_get_noresume(&pdev->dev);

        mmc_add_host(mmc);

        /* Unmask the IRQs we want to know about */
        if (!_host->chan_rx)
                irq_mask |= TMIO_MASK_READOP;
        if (!_host->chan_tx)
                irq_mask |= TMIO_MASK_WRITEOP;

        tmio_mmc_enable_mmc_irqs(_host, irq_mask);

        *host = _host;

        return 0;

pm_disable:
        pm_runtime_disable(&pdev->dev);
        iounmap(_host->ctl);
host_free:
        mmc_free_host(mmc);

        return ret;
}
EXPORT_SYMBOL(tmio_mmc_host_probe);

void tmio_mmc_host_remove(struct tmio_mmc_host *host)
{
        struct platform_device *pdev = host->pdev;

        /*
         * We don't have to manipulate pdata->power here: if there is a card in
         * the slot, the runtime PM is active and our .runtime_resume() will not
         * be run. If there is no card in the slot and the platform can suspend
         * the controller, the runtime PM is suspended and pdata->power == false,
         * so, our .runtime_resume() will not try to detect a card in the slot.
         */
        if (host->pdata->flags & TMIO_MMC_HAS_COLD_CD)
                pm_runtime_get_sync(&pdev->dev);

        mmc_remove_host(host->mmc);
        cancel_delayed_work_sync(&host->delayed_reset_work);
        tmio_mmc_release_dma(host);

        pm_runtime_put_sync(&pdev->dev);
        pm_runtime_disable(&pdev->dev);

        iounmap(host->ctl);
        mmc_free_host(host->mmc);
}
EXPORT_SYMBOL(tmio_mmc_host_remove);

#ifdef CONFIG_PM
int tmio_mmc_host_suspend(struct device *dev)
{
        struct mmc_host *mmc = dev_get_drvdata(dev);
        struct tmio_mmc_host *host = mmc_priv(mmc);
        int ret = mmc_suspend_host(mmc);

        if (!ret)
                tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_ALL);

        host->pm_error = pm_runtime_put_sync(dev);

        return ret;
}
EXPORT_SYMBOL(tmio_mmc_host_suspend);

int tmio_mmc_host_resume(struct device *dev)
{
        struct mmc_host *mmc = dev_get_drvdata(dev);
        struct tmio_mmc_host *host = mmc_priv(mmc);

        /* The MMC core will perform the complete set up */
        host->pdata->power = false;

        if (!host->pm_error)
                pm_runtime_get_sync(dev);

        tmio_mmc_reset(mmc_priv(mmc));
        tmio_mmc_request_dma(host, host->pdata);

        return mmc_resume_host(mmc);
}
EXPORT_SYMBOL(tmio_mmc_host_resume);

#endif  /* CONFIG_PM */

int tmio_mmc_host_runtime_suspend(struct device *dev)
{
        return 0;
}
EXPORT_SYMBOL(tmio_mmc_host_runtime_suspend);

int tmio_mmc_host_runtime_resume(struct device *dev)
{
        struct mmc_host *mmc = dev_get_drvdata(dev);
        struct tmio_mmc_host *host = mmc_priv(mmc);
        struct tmio_mmc_data *pdata = host->pdata;

        tmio_mmc_reset(host);

        if (pdata->power) {
                /* Only entered after a card-insert interrupt */
                tmio_mmc_set_ios(mmc, &mmc->ios);
                mmc_detect_change(mmc, msecs_to_jiffies(100));
        }

        return 0;
}
EXPORT_SYMBOL(tmio_mmc_host_runtime_resume);

MODULE_LICENSE("GPL v2");