Documentation: configfs examples crash fix
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / mmc / host / sdhci-pxa.c
blob089c9a68b7b1df68d1cd6a06267aa985664ecfd7
1 /* linux/drivers/mmc/host/sdhci-pxa.c
3 * Copyright (C) 2010 Marvell International Ltd.
4 * Zhangfei Gao <zhangfei.gao@marvell.com>
5 * Kevin Wang <dwang4@marvell.com>
6 * Mingwei Wang <mwwang@marvell.com>
7 * Philip Rakity <prakity@marvell.com>
8 * Mark Brown <markb@marvell.com>
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
15 /* Supports:
16 * SDHCI support for MMP2/PXA910/PXA168
18 * Refer to sdhci-s3c.c.
21 #include <linux/delay.h>
22 #include <linux/platform_device.h>
23 #include <linux/mmc/host.h>
24 #include <linux/clk.h>
25 #include <linux/io.h>
26 #include <linux/err.h>
27 #include <plat/sdhci.h>
28 #include "sdhci.h"
30 #define DRIVER_NAME "sdhci-pxa"
32 #define SD_FIFO_PARAM 0x104
33 #define DIS_PAD_SD_CLK_GATE 0x400
35 struct sdhci_pxa {
36 struct sdhci_host *host;
37 struct sdhci_pxa_platdata *pdata;
38 struct clk *clk;
39 struct resource *res;
41 u8 clk_enable;
44 /*****************************************************************************\
45 * *
46 * SDHCI core callbacks *
47 * *
48 \*****************************************************************************/
49 static void set_clock(struct sdhci_host *host, unsigned int clock)
51 struct sdhci_pxa *pxa = sdhci_priv(host);
52 u32 tmp = 0;
54 if (clock == 0) {
55 if (pxa->clk_enable) {
56 clk_disable(pxa->clk);
57 pxa->clk_enable = 0;
59 } else {
60 if (0 == pxa->clk_enable) {
61 if (pxa->pdata->flags & PXA_FLAG_DISABLE_CLOCK_GATING) {
62 tmp = readl(host->ioaddr + SD_FIFO_PARAM);
63 tmp |= DIS_PAD_SD_CLK_GATE;
64 writel(tmp, host->ioaddr + SD_FIFO_PARAM);
66 clk_enable(pxa->clk);
67 pxa->clk_enable = 1;
72 static int set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
74 u16 ctrl_2;
77 * Set V18_EN -- UHS modes do not work without this.
78 * does not change signaling voltage
80 ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
82 /* Select Bus Speed Mode for host */
83 ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
84 switch (uhs) {
85 case MMC_TIMING_UHS_SDR12:
86 ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
87 break;
88 case MMC_TIMING_UHS_SDR25:
89 ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
90 break;
91 case MMC_TIMING_UHS_SDR50:
92 ctrl_2 |= SDHCI_CTRL_UHS_SDR50 | SDHCI_CTRL_VDD_180;
93 break;
94 case MMC_TIMING_UHS_SDR104:
95 ctrl_2 |= SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_VDD_180;
96 break;
97 case MMC_TIMING_UHS_DDR50:
98 ctrl_2 |= SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180;
99 break;
102 sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
103 pr_debug("%s:%s uhs = %d, ctrl_2 = %04X\n",
104 __func__, mmc_hostname(host->mmc), uhs, ctrl_2);
106 return 0;
109 static struct sdhci_ops sdhci_pxa_ops = {
110 .set_uhs_signaling = set_uhs_signaling,
111 .set_clock = set_clock,
114 /*****************************************************************************\
116 * Device probing/removal *
118 \*****************************************************************************/
120 static int __devinit sdhci_pxa_probe(struct platform_device *pdev)
122 struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
123 struct device *dev = &pdev->dev;
124 struct sdhci_host *host = NULL;
125 struct resource *iomem = NULL;
126 struct sdhci_pxa *pxa = NULL;
127 int ret, irq;
129 irq = platform_get_irq(pdev, 0);
130 if (irq < 0) {
131 dev_err(dev, "no irq specified\n");
132 return irq;
135 iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
136 if (!iomem) {
137 dev_err(dev, "no memory specified\n");
138 return -ENOENT;
141 host = sdhci_alloc_host(&pdev->dev, sizeof(struct sdhci_pxa));
142 if (IS_ERR(host)) {
143 dev_err(dev, "failed to alloc host\n");
144 return PTR_ERR(host);
147 pxa = sdhci_priv(host);
148 pxa->host = host;
149 pxa->pdata = pdata;
150 pxa->clk_enable = 0;
152 pxa->clk = clk_get(dev, "PXA-SDHCLK");
153 if (IS_ERR(pxa->clk)) {
154 dev_err(dev, "failed to get io clock\n");
155 ret = PTR_ERR(pxa->clk);
156 goto out;
159 pxa->res = request_mem_region(iomem->start, resource_size(iomem),
160 mmc_hostname(host->mmc));
161 if (!pxa->res) {
162 dev_err(&pdev->dev, "cannot request region\n");
163 ret = -EBUSY;
164 goto out;
167 host->ioaddr = ioremap(iomem->start, resource_size(iomem));
168 if (!host->ioaddr) {
169 dev_err(&pdev->dev, "failed to remap registers\n");
170 ret = -ENOMEM;
171 goto out;
174 host->hw_name = "MMC";
175 host->ops = &sdhci_pxa_ops;
176 host->irq = irq;
177 host->quirks = SDHCI_QUIRK_BROKEN_ADMA
178 | SDHCI_QUIRK_BROKEN_TIMEOUT_VAL
179 | SDHCI_QUIRK_32BIT_DMA_ADDR
180 | SDHCI_QUIRK_32BIT_DMA_SIZE
181 | SDHCI_QUIRK_32BIT_ADMA_SIZE
182 | SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC;
184 if (pdata->quirks)
185 host->quirks |= pdata->quirks;
187 /* enable 1/8V DDR capable */
188 host->mmc->caps |= MMC_CAP_1_8V_DDR;
190 /* If slot design supports 8 bit data, indicate this to MMC. */
191 if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT)
192 host->mmc->caps |= MMC_CAP_8_BIT_DATA;
194 ret = sdhci_add_host(host);
195 if (ret) {
196 dev_err(&pdev->dev, "failed to add host\n");
197 goto out;
200 if (pxa->pdata->max_speed)
201 host->mmc->f_max = pxa->pdata->max_speed;
203 platform_set_drvdata(pdev, host);
205 return 0;
206 out:
207 if (host) {
208 clk_put(pxa->clk);
209 if (host->ioaddr)
210 iounmap(host->ioaddr);
211 if (pxa->res)
212 release_mem_region(pxa->res->start,
213 resource_size(pxa->res));
214 sdhci_free_host(host);
217 return ret;
220 static int __devexit sdhci_pxa_remove(struct platform_device *pdev)
222 struct sdhci_host *host = platform_get_drvdata(pdev);
223 struct sdhci_pxa *pxa = sdhci_priv(host);
224 int dead = 0;
225 u32 scratch;
227 if (host) {
228 scratch = readl(host->ioaddr + SDHCI_INT_STATUS);
229 if (scratch == (u32)-1)
230 dead = 1;
232 sdhci_remove_host(host, dead);
234 if (host->ioaddr)
235 iounmap(host->ioaddr);
236 if (pxa->res)
237 release_mem_region(pxa->res->start,
238 resource_size(pxa->res));
239 if (pxa->clk_enable) {
240 clk_disable(pxa->clk);
241 pxa->clk_enable = 0;
243 clk_put(pxa->clk);
245 sdhci_free_host(host);
246 platform_set_drvdata(pdev, NULL);
249 return 0;
252 #ifdef CONFIG_PM
253 static int sdhci_pxa_suspend(struct platform_device *dev, pm_message_t state)
255 struct sdhci_host *host = platform_get_drvdata(dev);
257 return sdhci_suspend_host(host, state);
260 static int sdhci_pxa_resume(struct platform_device *dev)
262 struct sdhci_host *host = platform_get_drvdata(dev);
264 return sdhci_resume_host(host);
266 #else
267 #define sdhci_pxa_suspend NULL
268 #define sdhci_pxa_resume NULL
269 #endif
271 static struct platform_driver sdhci_pxa_driver = {
272 .probe = sdhci_pxa_probe,
273 .remove = __devexit_p(sdhci_pxa_remove),
274 .suspend = sdhci_pxa_suspend,
275 .resume = sdhci_pxa_resume,
276 .driver = {
277 .name = DRIVER_NAME,
278 .owner = THIS_MODULE,
282 /*****************************************************************************\
284 * Driver init/exit *
286 \*****************************************************************************/
288 static int __init sdhci_pxa_init(void)
290 return platform_driver_register(&sdhci_pxa_driver);
293 static void __exit sdhci_pxa_exit(void)
295 platform_driver_unregister(&sdhci_pxa_driver);
298 module_init(sdhci_pxa_init);
299 module_exit(sdhci_pxa_exit);
301 MODULE_DESCRIPTION("SDH controller driver for PXA168/PXA910/MMP2");
302 MODULE_AUTHOR("Zhangfei Gao <zhangfei.gao@marvell.com>");
303 MODULE_LICENSE("GPL v2");