ext3: Fix debug messages in ext3_group_extend()
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / init / do_mounts.c
blob02e3ca4fc5271f33c4384d3ba8a77c8c4e5e306e
1 #include <linux/module.h>
2 #include <linux/sched.h>
3 #include <linux/ctype.h>
4 #include <linux/fd.h>
5 #include <linux/tty.h>
6 #include <linux/suspend.h>
7 #include <linux/root_dev.h>
8 #include <linux/security.h>
9 #include <linux/delay.h>
10 #include <linux/genhd.h>
11 #include <linux/mount.h>
12 #include <linux/device.h>
13 #include <linux/init.h>
14 #include <linux/fs.h>
15 #include <linux/initrd.h>
16 #include <linux/async.h>
17 #include <linux/fs_struct.h>
18 #include <linux/slab.h>
20 #include <linux/nfs_fs.h>
21 #include <linux/nfs_fs_sb.h>
22 #include <linux/nfs_mount.h>
24 #include "do_mounts.h"
26 int __initdata rd_doload; /* 1 = load RAM disk, 0 = don't load */
28 int root_mountflags = MS_RDONLY | MS_SILENT;
29 static char * __initdata root_device_name;
30 static char __initdata saved_root_name[64];
31 static int __initdata root_wait;
33 dev_t ROOT_DEV;
35 static int __init load_ramdisk(char *str)
37 rd_doload = simple_strtol(str,NULL,0) & 3;
38 return 1;
40 __setup("load_ramdisk=", load_ramdisk);
42 static int __init readonly(char *str)
44 if (*str)
45 return 0;
46 root_mountflags |= MS_RDONLY;
47 return 1;
50 static int __init readwrite(char *str)
52 if (*str)
53 return 0;
54 root_mountflags &= ~MS_RDONLY;
55 return 1;
58 __setup("ro", readonly);
59 __setup("rw", readwrite);
62 * Convert a name into device number. We accept the following variants:
64 * 1) device number in hexadecimal represents itself
65 * 2) /dev/nfs represents Root_NFS (0xff)
66 * 3) /dev/<disk_name> represents the device number of disk
67 * 4) /dev/<disk_name><decimal> represents the device number
68 * of partition - device number of disk plus the partition number
69 * 5) /dev/<disk_name>p<decimal> - same as the above, that form is
70 * used when disk name of partitioned disk ends on a digit.
72 * If name doesn't have fall into the categories above, we return (0,0).
73 * block_class is used to check if something is a disk name. If the disk
74 * name contains slashes, the device name has them replaced with
75 * bangs.
78 dev_t name_to_dev_t(char *name)
80 char s[32];
81 char *p;
82 dev_t res = 0;
83 int part;
85 if (strncmp(name, "/dev/", 5) != 0) {
86 unsigned maj, min;
88 if (sscanf(name, "%u:%u", &maj, &min) == 2) {
89 res = MKDEV(maj, min);
90 if (maj != MAJOR(res) || min != MINOR(res))
91 goto fail;
92 } else {
93 res = new_decode_dev(simple_strtoul(name, &p, 16));
94 if (*p)
95 goto fail;
97 goto done;
100 name += 5;
101 res = Root_NFS;
102 if (strcmp(name, "nfs") == 0)
103 goto done;
104 res = Root_RAM0;
105 if (strcmp(name, "ram") == 0)
106 goto done;
108 if (strlen(name) > 31)
109 goto fail;
110 strcpy(s, name);
111 for (p = s; *p; p++)
112 if (*p == '/')
113 *p = '!';
114 res = blk_lookup_devt(s, 0);
115 if (res)
116 goto done;
119 * try non-existant, but valid partition, which may only exist
120 * after revalidating the disk, like partitioned md devices
122 while (p > s && isdigit(p[-1]))
123 p--;
124 if (p == s || !*p || *p == '0')
125 goto fail;
127 /* try disk name without <part number> */
128 part = simple_strtoul(p, NULL, 10);
129 *p = '\0';
130 res = blk_lookup_devt(s, part);
131 if (res)
132 goto done;
134 /* try disk name without p<part number> */
135 if (p < s + 2 || !isdigit(p[-2]) || p[-1] != 'p')
136 goto fail;
137 p[-1] = '\0';
138 res = blk_lookup_devt(s, part);
139 if (res)
140 goto done;
142 fail:
143 return 0;
144 done:
145 return res;
148 static int __init root_dev_setup(char *line)
150 strlcpy(saved_root_name, line, sizeof(saved_root_name));
151 return 1;
154 __setup("root=", root_dev_setup);
156 static int __init rootwait_setup(char *str)
158 if (*str)
159 return 0;
160 root_wait = 1;
161 return 1;
164 __setup("rootwait", rootwait_setup);
166 static char * __initdata root_mount_data;
167 static int __init root_data_setup(char *str)
169 root_mount_data = str;
170 return 1;
173 static char * __initdata root_fs_names;
174 static int __init fs_names_setup(char *str)
176 root_fs_names = str;
177 return 1;
180 static unsigned int __initdata root_delay;
181 static int __init root_delay_setup(char *str)
183 root_delay = simple_strtoul(str, NULL, 0);
184 return 1;
187 __setup("rootflags=", root_data_setup);
188 __setup("rootfstype=", fs_names_setup);
189 __setup("rootdelay=", root_delay_setup);
191 static void __init get_fs_names(char *page)
193 char *s = page;
195 if (root_fs_names) {
196 strcpy(page, root_fs_names);
197 while (*s++) {
198 if (s[-1] == ',')
199 s[-1] = '\0';
201 } else {
202 int len = get_filesystem_list(page);
203 char *p, *next;
205 page[len] = '\0';
206 for (p = page-1; p; p = next) {
207 next = strchr(++p, '\n');
208 if (*p++ != '\t')
209 continue;
210 while ((*s++ = *p++) != '\n')
212 s[-1] = '\0';
215 *s = '\0';
218 static int __init do_mount_root(char *name, char *fs, int flags, void *data)
220 int err = sys_mount(name, "/root", fs, flags, data);
221 if (err)
222 return err;
224 sys_chdir("/root");
225 ROOT_DEV = current->fs->pwd.mnt->mnt_sb->s_dev;
226 printk("VFS: Mounted root (%s filesystem)%s on device %u:%u.\n",
227 current->fs->pwd.mnt->mnt_sb->s_type->name,
228 current->fs->pwd.mnt->mnt_sb->s_flags & MS_RDONLY ?
229 " readonly" : "", MAJOR(ROOT_DEV), MINOR(ROOT_DEV));
230 return 0;
233 void __init mount_block_root(char *name, int flags)
235 char *fs_names = __getname_gfp(GFP_KERNEL
236 | __GFP_NOTRACK_FALSE_POSITIVE);
237 char *p;
238 #ifdef CONFIG_BLOCK
239 char b[BDEVNAME_SIZE];
240 #else
241 const char *b = name;
242 #endif
244 get_fs_names(fs_names);
245 retry:
246 for (p = fs_names; *p; p += strlen(p)+1) {
247 int err = do_mount_root(name, p, flags, root_mount_data);
248 switch (err) {
249 case 0:
250 goto out;
251 case -EACCES:
252 flags |= MS_RDONLY;
253 goto retry;
254 case -EINVAL:
255 continue;
258 * Allow the user to distinguish between failed sys_open
259 * and bad superblock on root device.
260 * and give them a list of the available devices
262 #ifdef CONFIG_BLOCK
263 __bdevname(ROOT_DEV, b);
264 #endif
265 printk("VFS: Cannot open root device \"%s\" or %s\n",
266 root_device_name, b);
267 printk("Please append a correct \"root=\" boot option; here are the available partitions:\n");
269 printk_all_partitions();
270 #ifdef CONFIG_DEBUG_BLOCK_EXT_DEVT
271 printk("DEBUG_BLOCK_EXT_DEVT is enabled, you need to specify "
272 "explicit textual name for \"root=\" boot option.\n");
273 #endif
274 panic("VFS: Unable to mount root fs on %s", b);
277 printk("List of all partitions:\n");
278 printk_all_partitions();
279 printk("No filesystem could mount root, tried: ");
280 for (p = fs_names; *p; p += strlen(p)+1)
281 printk(" %s", p);
282 printk("\n");
283 #ifdef CONFIG_BLOCK
284 __bdevname(ROOT_DEV, b);
285 #endif
286 panic("VFS: Unable to mount root fs on %s", b);
287 out:
288 putname(fs_names);
291 #ifdef CONFIG_ROOT_NFS
292 static int __init mount_nfs_root(void)
294 void *data = nfs_root_data();
296 create_dev("/dev/root", ROOT_DEV);
297 if (data &&
298 do_mount_root("/dev/root", "nfs", root_mountflags, data) == 0)
299 return 1;
300 return 0;
302 #endif
304 #if defined(CONFIG_BLK_DEV_RAM) || defined(CONFIG_BLK_DEV_FD)
305 void __init change_floppy(char *fmt, ...)
307 struct termios termios;
308 char buf[80];
309 char c;
310 int fd;
311 va_list args;
312 va_start(args, fmt);
313 vsprintf(buf, fmt, args);
314 va_end(args);
315 fd = sys_open("/dev/root", O_RDWR | O_NDELAY, 0);
316 if (fd >= 0) {
317 sys_ioctl(fd, FDEJECT, 0);
318 sys_close(fd);
320 printk(KERN_NOTICE "VFS: Insert %s and press ENTER\n", buf);
321 fd = sys_open("/dev/console", O_RDWR, 0);
322 if (fd >= 0) {
323 sys_ioctl(fd, TCGETS, (long)&termios);
324 termios.c_lflag &= ~ICANON;
325 sys_ioctl(fd, TCSETSF, (long)&termios);
326 sys_read(fd, &c, 1);
327 termios.c_lflag |= ICANON;
328 sys_ioctl(fd, TCSETSF, (long)&termios);
329 sys_close(fd);
332 #endif
334 void __init mount_root(void)
336 #ifdef CONFIG_ROOT_NFS
337 if (MAJOR(ROOT_DEV) == UNNAMED_MAJOR) {
338 if (mount_nfs_root())
339 return;
341 printk(KERN_ERR "VFS: Unable to mount root fs via NFS, trying floppy.\n");
342 ROOT_DEV = Root_FD0;
344 #endif
345 #ifdef CONFIG_BLK_DEV_FD
346 if (MAJOR(ROOT_DEV) == FLOPPY_MAJOR) {
347 /* rd_doload is 2 for a dual initrd/ramload setup */
348 if (rd_doload==2) {
349 if (rd_load_disk(1)) {
350 ROOT_DEV = Root_RAM1;
351 root_device_name = NULL;
353 } else
354 change_floppy("root floppy");
356 #endif
357 #ifdef CONFIG_BLOCK
358 create_dev("/dev/root", ROOT_DEV);
359 mount_block_root("/dev/root", root_mountflags);
360 #endif
364 * Prepare the namespace - decide what/where to mount, load ramdisks, etc.
366 void __init prepare_namespace(void)
368 int is_floppy;
370 if (root_delay) {
371 printk(KERN_INFO "Waiting %dsec before mounting root device...\n",
372 root_delay);
373 ssleep(root_delay);
377 * wait for the known devices to complete their probing
379 * Note: this is a potential source of long boot delays.
380 * For example, it is not atypical to wait 5 seconds here
381 * for the touchpad of a laptop to initialize.
383 wait_for_device_probe();
385 md_run_setup();
387 if (saved_root_name[0]) {
388 root_device_name = saved_root_name;
389 if (!strncmp(root_device_name, "mtd", 3) ||
390 !strncmp(root_device_name, "ubi", 3)) {
391 mount_block_root(root_device_name, root_mountflags);
392 goto out;
394 ROOT_DEV = name_to_dev_t(root_device_name);
395 if (strncmp(root_device_name, "/dev/", 5) == 0)
396 root_device_name += 5;
399 if (initrd_load())
400 goto out;
402 /* wait for any asynchronous scanning to complete */
403 if ((ROOT_DEV == 0) && root_wait) {
404 printk(KERN_INFO "Waiting for root device %s...\n",
405 saved_root_name);
406 while (driver_probe_done() != 0 ||
407 (ROOT_DEV = name_to_dev_t(saved_root_name)) == 0)
408 msleep(100);
409 async_synchronize_full();
412 is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
414 if (is_floppy && rd_doload && rd_load_disk(0))
415 ROOT_DEV = Root_RAM0;
417 mount_root();
418 out:
419 devtmpfs_mount("dev");
420 sys_mount(".", "/", NULL, MS_MOVE, NULL);
421 sys_chroot(".");