memcg swap: use mem_cgroup_uncharge_swap fix
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / net / mac80211 / mesh.c
blobe5fbb7cf356250ce75968d8102d4dd87430ef551
1 /*
2 * Copyright (c) 2008, 2009 open80211s Ltd.
3 * Authors: Luis Carlos Cobo <luisca@cozybit.com>
4 * Javier Cardona <javier@cozybit.com>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
11 #include <linux/slab.h>
12 #include <asm/unaligned.h>
13 #include "ieee80211_i.h"
14 #include "mesh.h"
16 #define MESHCONF_CAPAB_ACCEPT_PLINKS 0x01
17 #define MESHCONF_CAPAB_FORWARDING 0x08
19 #define TMR_RUNNING_HK 0
20 #define TMR_RUNNING_MP 1
21 #define TMR_RUNNING_MPR 2
23 int mesh_allocated;
24 static struct kmem_cache *rm_cache;
26 #ifdef CONFIG_MAC80211_MESH
27 bool mesh_action_is_path_sel(struct ieee80211_mgmt *mgmt)
29 return (mgmt->u.action.u.mesh_action.action_code ==
30 WLAN_MESH_ACTION_HWMP_PATH_SELECTION);
32 #else
33 bool mesh_action_is_path_sel(struct ieee80211_mgmt *mgmt)
34 { return false; }
35 #endif
37 void ieee80211s_init(void)
39 mesh_pathtbl_init();
40 mesh_allocated = 1;
41 rm_cache = kmem_cache_create("mesh_rmc", sizeof(struct rmc_entry),
42 0, 0, NULL);
45 void ieee80211s_stop(void)
47 mesh_pathtbl_unregister();
48 kmem_cache_destroy(rm_cache);
51 static void ieee80211_mesh_housekeeping_timer(unsigned long data)
53 struct ieee80211_sub_if_data *sdata = (void *) data;
54 struct ieee80211_local *local = sdata->local;
55 struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
57 set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags);
59 if (local->quiescing) {
60 set_bit(TMR_RUNNING_HK, &ifmsh->timers_running);
61 return;
64 ieee80211_queue_work(&local->hw, &sdata->work);
67 /**
68 * mesh_matches_local - check if the config of a mesh point matches ours
70 * @ie: information elements of a management frame from the mesh peer
71 * @sdata: local mesh subif
73 * This function checks if the mesh configuration of a mesh point matches the
74 * local mesh configuration, i.e. if both nodes belong to the same mesh network.
76 bool mesh_matches_local(struct ieee802_11_elems *ie, struct ieee80211_sub_if_data *sdata)
78 struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
79 struct ieee80211_local *local = sdata->local;
82 * As support for each feature is added, check for matching
83 * - On mesh config capabilities
84 * - Power Save Support En
85 * - Sync support enabled
86 * - Sync support active
87 * - Sync support required from peer
88 * - MDA enabled
89 * - Power management control on fc
91 if (!(ifmsh->mesh_id_len == ie->mesh_id_len &&
92 memcmp(ifmsh->mesh_id, ie->mesh_id, ie->mesh_id_len) == 0 &&
93 (ifmsh->mesh_pp_id == ie->mesh_config->meshconf_psel) &&
94 (ifmsh->mesh_pm_id == ie->mesh_config->meshconf_pmetric) &&
95 (ifmsh->mesh_cc_id == ie->mesh_config->meshconf_congest) &&
96 (ifmsh->mesh_sp_id == ie->mesh_config->meshconf_synch) &&
97 (ifmsh->mesh_auth_id == ie->mesh_config->meshconf_auth)))
98 goto mismatch;
100 /* disallow peering with mismatched channel types for now */
101 if (ie->ht_info_elem &&
102 (local->_oper_channel_type !=
103 ieee80211_ht_info_to_channel_type(ie->ht_info_elem)))
104 goto mismatch;
106 return true;
107 mismatch:
108 return false;
112 * mesh_peer_accepts_plinks - check if an mp is willing to establish peer links
114 * @ie: information elements of a management frame from the mesh peer
116 bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie)
118 return (ie->mesh_config->meshconf_cap &
119 MESHCONF_CAPAB_ACCEPT_PLINKS) != 0;
123 * mesh_accept_plinks_update: update accepting_plink in local mesh beacons
125 * @sdata: mesh interface in which mesh beacons are going to be updated
127 void mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata)
129 bool free_plinks;
131 /* In case mesh_plink_free_count > 0 and mesh_plinktbl_capacity == 0,
132 * the mesh interface might be able to establish plinks with peers that
133 * are already on the table but are not on PLINK_ESTAB state. However,
134 * in general the mesh interface is not accepting peer link requests
135 * from new peers, and that must be reflected in the beacon
137 free_plinks = mesh_plink_availables(sdata);
139 if (free_plinks != sdata->u.mesh.accepting_plinks)
140 ieee80211_mesh_housekeeping_timer((unsigned long) sdata);
143 int mesh_rmc_init(struct ieee80211_sub_if_data *sdata)
145 int i;
147 sdata->u.mesh.rmc = kmalloc(sizeof(struct mesh_rmc), GFP_KERNEL);
148 if (!sdata->u.mesh.rmc)
149 return -ENOMEM;
150 sdata->u.mesh.rmc->idx_mask = RMC_BUCKETS - 1;
151 for (i = 0; i < RMC_BUCKETS; i++)
152 INIT_LIST_HEAD(&sdata->u.mesh.rmc->bucket[i].list);
153 return 0;
156 void mesh_rmc_free(struct ieee80211_sub_if_data *sdata)
158 struct mesh_rmc *rmc = sdata->u.mesh.rmc;
159 struct rmc_entry *p, *n;
160 int i;
162 if (!sdata->u.mesh.rmc)
163 return;
165 for (i = 0; i < RMC_BUCKETS; i++)
166 list_for_each_entry_safe(p, n, &rmc->bucket[i].list, list) {
167 list_del(&p->list);
168 kmem_cache_free(rm_cache, p);
171 kfree(rmc);
172 sdata->u.mesh.rmc = NULL;
176 * mesh_rmc_check - Check frame in recent multicast cache and add if absent.
178 * @sa: source address
179 * @mesh_hdr: mesh_header
181 * Returns: 0 if the frame is not in the cache, nonzero otherwise.
183 * Checks using the source address and the mesh sequence number if we have
184 * received this frame lately. If the frame is not in the cache, it is added to
185 * it.
187 int mesh_rmc_check(u8 *sa, struct ieee80211s_hdr *mesh_hdr,
188 struct ieee80211_sub_if_data *sdata)
190 struct mesh_rmc *rmc = sdata->u.mesh.rmc;
191 u32 seqnum = 0;
192 int entries = 0;
193 u8 idx;
194 struct rmc_entry *p, *n;
196 /* Don't care about endianness since only match matters */
197 memcpy(&seqnum, &mesh_hdr->seqnum, sizeof(mesh_hdr->seqnum));
198 idx = le32_to_cpu(mesh_hdr->seqnum) & rmc->idx_mask;
199 list_for_each_entry_safe(p, n, &rmc->bucket[idx].list, list) {
200 ++entries;
201 if (time_after(jiffies, p->exp_time) ||
202 (entries == RMC_QUEUE_MAX_LEN)) {
203 list_del(&p->list);
204 kmem_cache_free(rm_cache, p);
205 --entries;
206 } else if ((seqnum == p->seqnum) &&
207 (compare_ether_addr(sa, p->sa) == 0))
208 return -1;
211 p = kmem_cache_alloc(rm_cache, GFP_ATOMIC);
212 if (!p)
213 return 0;
215 p->seqnum = seqnum;
216 p->exp_time = jiffies + RMC_TIMEOUT;
217 memcpy(p->sa, sa, ETH_ALEN);
218 list_add(&p->list, &rmc->bucket[idx].list);
219 return 0;
223 mesh_add_meshconf_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
225 struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
226 u8 *pos, neighbors;
227 u8 meshconf_len = sizeof(struct ieee80211_meshconf_ie);
229 if (skb_tailroom(skb) < 2 + meshconf_len)
230 return -ENOMEM;
232 pos = skb_put(skb, 2 + meshconf_len);
233 *pos++ = WLAN_EID_MESH_CONFIG;
234 *pos++ = meshconf_len;
236 /* Active path selection protocol ID */
237 *pos++ = ifmsh->mesh_pp_id;
238 /* Active path selection metric ID */
239 *pos++ = ifmsh->mesh_pm_id;
240 /* Congestion control mode identifier */
241 *pos++ = ifmsh->mesh_cc_id;
242 /* Synchronization protocol identifier */
243 *pos++ = ifmsh->mesh_sp_id;
244 /* Authentication Protocol identifier */
245 *pos++ = ifmsh->mesh_auth_id;
246 /* Mesh Formation Info - number of neighbors */
247 neighbors = atomic_read(&ifmsh->mshstats.estab_plinks);
248 /* Number of neighbor mesh STAs or 15 whichever is smaller */
249 neighbors = (neighbors > 15) ? 15 : neighbors;
250 *pos++ = neighbors << 1;
251 /* Mesh capability */
252 ifmsh->accepting_plinks = mesh_plink_availables(sdata);
253 *pos = MESHCONF_CAPAB_FORWARDING;
254 *pos++ |= ifmsh->accepting_plinks ?
255 MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00;
256 *pos++ = 0x00;
258 return 0;
262 mesh_add_meshid_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
264 struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
265 u8 *pos;
267 if (skb_tailroom(skb) < 2 + ifmsh->mesh_id_len)
268 return -ENOMEM;
270 pos = skb_put(skb, 2 + ifmsh->mesh_id_len);
271 *pos++ = WLAN_EID_MESH_ID;
272 *pos++ = ifmsh->mesh_id_len;
273 if (ifmsh->mesh_id_len)
274 memcpy(pos, ifmsh->mesh_id, ifmsh->mesh_id_len);
276 return 0;
280 mesh_add_vendor_ies(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
282 struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
283 u8 offset, len;
284 const u8 *data;
286 if (!ifmsh->ie || !ifmsh->ie_len)
287 return 0;
289 /* fast-forward to vendor IEs */
290 offset = ieee80211_ie_split_vendor(ifmsh->ie, ifmsh->ie_len, 0);
292 if (offset) {
293 len = ifmsh->ie_len - offset;
294 data = ifmsh->ie + offset;
295 if (skb_tailroom(skb) < len)
296 return -ENOMEM;
297 memcpy(skb_put(skb, len), data, len);
300 return 0;
304 mesh_add_rsn_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
306 struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
307 u8 len = 0;
308 const u8 *data;
310 if (!ifmsh->ie || !ifmsh->ie_len)
311 return 0;
313 /* find RSN IE */
314 data = ifmsh->ie;
315 while (data < ifmsh->ie + ifmsh->ie_len) {
316 if (*data == WLAN_EID_RSN) {
317 len = data[1] + 2;
318 break;
320 data++;
323 if (len) {
324 if (skb_tailroom(skb) < len)
325 return -ENOMEM;
326 memcpy(skb_put(skb, len), data, len);
329 return 0;
332 int mesh_add_ds_params_ie(struct sk_buff *skb,
333 struct ieee80211_sub_if_data *sdata)
335 struct ieee80211_local *local = sdata->local;
336 struct ieee80211_supported_band *sband;
337 u8 *pos;
339 if (skb_tailroom(skb) < 3)
340 return -ENOMEM;
342 sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
343 if (sband->band == IEEE80211_BAND_2GHZ) {
344 pos = skb_put(skb, 2 + 1);
345 *pos++ = WLAN_EID_DS_PARAMS;
346 *pos++ = 1;
347 *pos++ = ieee80211_frequency_to_channel(local->hw.conf.channel->center_freq);
350 return 0;
353 int mesh_add_ht_cap_ie(struct sk_buff *skb,
354 struct ieee80211_sub_if_data *sdata)
356 struct ieee80211_local *local = sdata->local;
357 struct ieee80211_supported_band *sband;
358 u8 *pos;
360 sband = local->hw.wiphy->bands[local->oper_channel->band];
361 if (!sband->ht_cap.ht_supported ||
362 local->_oper_channel_type == NL80211_CHAN_NO_HT)
363 return 0;
365 if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_ht_cap))
366 return -ENOMEM;
368 pos = skb_put(skb, 2 + sizeof(struct ieee80211_ht_cap));
369 ieee80211_ie_build_ht_cap(pos, &sband->ht_cap, sband->ht_cap.cap);
371 return 0;
374 int mesh_add_ht_info_ie(struct sk_buff *skb,
375 struct ieee80211_sub_if_data *sdata)
377 struct ieee80211_local *local = sdata->local;
378 struct ieee80211_channel *channel = local->oper_channel;
379 enum nl80211_channel_type channel_type = local->_oper_channel_type;
380 struct ieee80211_supported_band *sband =
381 local->hw.wiphy->bands[channel->band];
382 struct ieee80211_sta_ht_cap *ht_cap = &sband->ht_cap;
383 u8 *pos;
385 if (!ht_cap->ht_supported || channel_type == NL80211_CHAN_NO_HT)
386 return 0;
388 if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_ht_info))
389 return -ENOMEM;
391 pos = skb_put(skb, 2 + sizeof(struct ieee80211_ht_info));
392 ieee80211_ie_build_ht_info(pos, ht_cap, channel, channel_type);
394 return 0;
396 static void ieee80211_mesh_path_timer(unsigned long data)
398 struct ieee80211_sub_if_data *sdata =
399 (struct ieee80211_sub_if_data *) data;
400 struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
401 struct ieee80211_local *local = sdata->local;
403 if (local->quiescing) {
404 set_bit(TMR_RUNNING_MP, &ifmsh->timers_running);
405 return;
408 ieee80211_queue_work(&local->hw, &sdata->work);
411 static void ieee80211_mesh_path_root_timer(unsigned long data)
413 struct ieee80211_sub_if_data *sdata =
414 (struct ieee80211_sub_if_data *) data;
415 struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
416 struct ieee80211_local *local = sdata->local;
418 set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
420 if (local->quiescing) {
421 set_bit(TMR_RUNNING_MPR, &ifmsh->timers_running);
422 return;
425 ieee80211_queue_work(&local->hw, &sdata->work);
428 void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh)
430 if (ifmsh->mshcfg.dot11MeshHWMPRootMode)
431 set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
432 else {
433 clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
434 /* stop running timer */
435 del_timer_sync(&ifmsh->mesh_path_root_timer);
440 * ieee80211_fill_mesh_addresses - fill addresses of a locally originated mesh frame
441 * @hdr: 802.11 frame header
442 * @fc: frame control field
443 * @meshda: destination address in the mesh
444 * @meshsa: source address address in the mesh. Same as TA, as frame is
445 * locally originated.
447 * Return the length of the 802.11 (does not include a mesh control header)
449 int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc,
450 const u8 *meshda, const u8 *meshsa)
452 if (is_multicast_ether_addr(meshda)) {
453 *fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS);
454 /* DA TA SA */
455 memcpy(hdr->addr1, meshda, ETH_ALEN);
456 memcpy(hdr->addr2, meshsa, ETH_ALEN);
457 memcpy(hdr->addr3, meshsa, ETH_ALEN);
458 return 24;
459 } else {
460 *fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS);
461 /* RA TA DA SA */
462 memset(hdr->addr1, 0, ETH_ALEN); /* RA is resolved later */
463 memcpy(hdr->addr2, meshsa, ETH_ALEN);
464 memcpy(hdr->addr3, meshda, ETH_ALEN);
465 memcpy(hdr->addr4, meshsa, ETH_ALEN);
466 return 30;
471 * ieee80211_new_mesh_header - create a new mesh header
472 * @meshhdr: uninitialized mesh header
473 * @sdata: mesh interface to be used
474 * @addr4or5: 1st address in the ae header, which may correspond to address 4
475 * (if addr6 is NULL) or address 5 (if addr6 is present). It may
476 * be NULL.
477 * @addr6: 2nd address in the ae header, which corresponds to addr6 of the
478 * mesh frame
480 * Return the header length.
482 int ieee80211_new_mesh_header(struct ieee80211s_hdr *meshhdr,
483 struct ieee80211_sub_if_data *sdata, char *addr4or5,
484 char *addr6)
486 int aelen = 0;
487 BUG_ON(!addr4or5 && addr6);
488 memset(meshhdr, 0, sizeof(*meshhdr));
489 meshhdr->ttl = sdata->u.mesh.mshcfg.dot11MeshTTL;
490 put_unaligned(cpu_to_le32(sdata->u.mesh.mesh_seqnum), &meshhdr->seqnum);
491 sdata->u.mesh.mesh_seqnum++;
492 if (addr4or5 && !addr6) {
493 meshhdr->flags |= MESH_FLAGS_AE_A4;
494 aelen += ETH_ALEN;
495 memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN);
496 } else if (addr4or5 && addr6) {
497 meshhdr->flags |= MESH_FLAGS_AE_A5_A6;
498 aelen += 2 * ETH_ALEN;
499 memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN);
500 memcpy(meshhdr->eaddr2, addr6, ETH_ALEN);
502 return 6 + aelen;
505 static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata,
506 struct ieee80211_if_mesh *ifmsh)
508 bool free_plinks;
510 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
511 printk(KERN_DEBUG "%s: running mesh housekeeping\n",
512 sdata->name);
513 #endif
515 ieee80211_sta_expire(sdata, IEEE80211_MESH_PEER_INACTIVITY_LIMIT);
516 mesh_path_expire(sdata);
518 free_plinks = mesh_plink_availables(sdata);
519 if (free_plinks != sdata->u.mesh.accepting_plinks)
520 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON);
522 mod_timer(&ifmsh->housekeeping_timer,
523 round_jiffies(jiffies + IEEE80211_MESH_HOUSEKEEPING_INTERVAL));
526 static void ieee80211_mesh_rootpath(struct ieee80211_sub_if_data *sdata)
528 struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
530 mesh_path_tx_root_frame(sdata);
531 mod_timer(&ifmsh->mesh_path_root_timer,
532 round_jiffies(TU_TO_EXP_TIME(
533 ifmsh->mshcfg.dot11MeshHWMPRannInterval)));
536 #ifdef CONFIG_PM
537 void ieee80211_mesh_quiesce(struct ieee80211_sub_if_data *sdata)
539 struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
541 /* use atomic bitops in case all timers fire at the same time */
543 if (del_timer_sync(&ifmsh->housekeeping_timer))
544 set_bit(TMR_RUNNING_HK, &ifmsh->timers_running);
545 if (del_timer_sync(&ifmsh->mesh_path_timer))
546 set_bit(TMR_RUNNING_MP, &ifmsh->timers_running);
547 if (del_timer_sync(&ifmsh->mesh_path_root_timer))
548 set_bit(TMR_RUNNING_MPR, &ifmsh->timers_running);
551 void ieee80211_mesh_restart(struct ieee80211_sub_if_data *sdata)
553 struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
555 if (test_and_clear_bit(TMR_RUNNING_HK, &ifmsh->timers_running))
556 add_timer(&ifmsh->housekeeping_timer);
557 if (test_and_clear_bit(TMR_RUNNING_MP, &ifmsh->timers_running))
558 add_timer(&ifmsh->mesh_path_timer);
559 if (test_and_clear_bit(TMR_RUNNING_MPR, &ifmsh->timers_running))
560 add_timer(&ifmsh->mesh_path_root_timer);
561 ieee80211_mesh_root_setup(ifmsh);
563 #endif
565 void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata)
567 struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
568 struct ieee80211_local *local = sdata->local;
570 local->fif_other_bss++;
571 /* mesh ifaces must set allmulti to forward mcast traffic */
572 atomic_inc(&local->iff_allmultis);
573 ieee80211_configure_filter(local);
575 ifmsh->mesh_cc_id = 0; /* Disabled */
576 ifmsh->mesh_sp_id = 0; /* Neighbor Offset */
577 ifmsh->mesh_auth_id = 0; /* Disabled */
578 set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags);
579 ieee80211_mesh_root_setup(ifmsh);
580 ieee80211_queue_work(&local->hw, &sdata->work);
581 sdata->vif.bss_conf.beacon_int = MESH_DEFAULT_BEACON_INTERVAL;
582 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON |
583 BSS_CHANGED_BEACON_ENABLED |
584 BSS_CHANGED_BEACON_INT);
587 void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata)
589 struct ieee80211_local *local = sdata->local;
590 struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
592 ifmsh->mesh_id_len = 0;
593 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED);
594 sta_info_flush(local, NULL);
596 del_timer_sync(&sdata->u.mesh.housekeeping_timer);
597 del_timer_sync(&sdata->u.mesh.mesh_path_root_timer);
599 * If the timer fired while we waited for it, it will have
600 * requeued the work. Now the work will be running again
601 * but will not rearm the timer again because it checks
602 * whether the interface is running, which, at this point,
603 * it no longer is.
605 cancel_work_sync(&sdata->work);
607 local->fif_other_bss--;
608 atomic_dec(&local->iff_allmultis);
609 ieee80211_configure_filter(local);
612 static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
613 u16 stype,
614 struct ieee80211_mgmt *mgmt,
615 size_t len,
616 struct ieee80211_rx_status *rx_status)
618 struct ieee80211_local *local = sdata->local;
619 struct ieee802_11_elems elems;
620 struct ieee80211_channel *channel;
621 u32 supp_rates = 0;
622 size_t baselen;
623 int freq;
624 enum ieee80211_band band = rx_status->band;
626 /* ignore ProbeResp to foreign address */
627 if (stype == IEEE80211_STYPE_PROBE_RESP &&
628 compare_ether_addr(mgmt->da, sdata->vif.addr))
629 return;
631 baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt;
632 if (baselen > len)
633 return;
635 ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen,
636 &elems);
638 /* ignore beacons from secure mesh peers if our security is off */
639 if (elems.rsn_len && sdata->u.mesh.security == IEEE80211_MESH_SEC_NONE)
640 return;
642 if (elems.ds_params && elems.ds_params_len == 1)
643 freq = ieee80211_channel_to_frequency(elems.ds_params[0], band);
644 else
645 freq = rx_status->freq;
647 channel = ieee80211_get_channel(local->hw.wiphy, freq);
649 if (!channel || channel->flags & IEEE80211_CHAN_DISABLED)
650 return;
652 if (elems.mesh_id && elems.mesh_config &&
653 mesh_matches_local(&elems, sdata)) {
654 supp_rates = ieee80211_sta_get_rates(local, &elems, band);
655 mesh_neighbour_update(mgmt->sa, supp_rates, sdata, &elems);
659 static void ieee80211_mesh_rx_mgmt_action(struct ieee80211_sub_if_data *sdata,
660 struct ieee80211_mgmt *mgmt,
661 size_t len,
662 struct ieee80211_rx_status *rx_status)
664 switch (mgmt->u.action.category) {
665 case WLAN_CATEGORY_SELF_PROTECTED:
666 switch (mgmt->u.action.u.self_prot.action_code) {
667 case WLAN_SP_MESH_PEERING_OPEN:
668 case WLAN_SP_MESH_PEERING_CLOSE:
669 case WLAN_SP_MESH_PEERING_CONFIRM:
670 mesh_rx_plink_frame(sdata, mgmt, len, rx_status);
671 break;
673 break;
674 case WLAN_CATEGORY_MESH_ACTION:
675 if (mesh_action_is_path_sel(mgmt))
676 mesh_rx_path_sel_frame(sdata, mgmt, len);
677 break;
681 void ieee80211_mesh_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
682 struct sk_buff *skb)
684 struct ieee80211_rx_status *rx_status;
685 struct ieee80211_mgmt *mgmt;
686 u16 stype;
688 rx_status = IEEE80211_SKB_RXCB(skb);
689 mgmt = (struct ieee80211_mgmt *) skb->data;
690 stype = le16_to_cpu(mgmt->frame_control) & IEEE80211_FCTL_STYPE;
692 switch (stype) {
693 case IEEE80211_STYPE_PROBE_RESP:
694 case IEEE80211_STYPE_BEACON:
695 ieee80211_mesh_rx_bcn_presp(sdata, stype, mgmt, skb->len,
696 rx_status);
697 break;
698 case IEEE80211_STYPE_ACTION:
699 ieee80211_mesh_rx_mgmt_action(sdata, mgmt, skb->len, rx_status);
700 break;
704 void ieee80211_mesh_work(struct ieee80211_sub_if_data *sdata)
706 struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
708 if (ifmsh->preq_queue_len &&
709 time_after(jiffies,
710 ifmsh->last_preq + msecs_to_jiffies(ifmsh->mshcfg.dot11MeshHWMPpreqMinInterval)))
711 mesh_path_start_discovery(sdata);
713 if (test_and_clear_bit(MESH_WORK_GROW_MPATH_TABLE, &ifmsh->wrkq_flags))
714 mesh_mpath_table_grow();
716 if (test_and_clear_bit(MESH_WORK_GROW_MPP_TABLE, &ifmsh->wrkq_flags))
717 mesh_mpp_table_grow();
719 if (test_and_clear_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags))
720 ieee80211_mesh_housekeeping(sdata, ifmsh);
722 if (test_and_clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags))
723 ieee80211_mesh_rootpath(sdata);
726 void ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local)
728 struct ieee80211_sub_if_data *sdata;
730 rcu_read_lock();
731 list_for_each_entry_rcu(sdata, &local->interfaces, list)
732 if (ieee80211_vif_is_mesh(&sdata->vif))
733 ieee80211_queue_work(&local->hw, &sdata->work);
734 rcu_read_unlock();
737 void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata)
739 struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
741 setup_timer(&ifmsh->housekeeping_timer,
742 ieee80211_mesh_housekeeping_timer,
743 (unsigned long) sdata);
745 ifmsh->accepting_plinks = true;
746 ifmsh->preq_id = 0;
747 ifmsh->sn = 0;
748 ifmsh->num_gates = 0;
749 atomic_set(&ifmsh->mpaths, 0);
750 mesh_rmc_init(sdata);
751 ifmsh->last_preq = jiffies;
752 ifmsh->next_perr = jiffies;
753 /* Allocate all mesh structures when creating the first mesh interface. */
754 if (!mesh_allocated)
755 ieee80211s_init();
756 setup_timer(&ifmsh->mesh_path_timer,
757 ieee80211_mesh_path_timer,
758 (unsigned long) sdata);
759 setup_timer(&ifmsh->mesh_path_root_timer,
760 ieee80211_mesh_path_root_timer,
761 (unsigned long) sdata);
762 INIT_LIST_HEAD(&ifmsh->preq_queue.list);
763 spin_lock_init(&ifmsh->mesh_preq_queue_lock);