drivers/target/target_core_cdb.c

   1 /*
   2  * CDB emulation for non-READ/WRITE commands.
   3  *
   4  * Copyright (c) 2002, 2003, 2004, 2005 PyX Technologies, Inc.
   5  * Copyright (c) 2005, 2006, 2007 SBE, Inc.
   6  * Copyright (c) 2007-2010 Rising Tide Systems
   7  * Copyright (c) 2008-2010 Linux-iSCSI.org
   8  *
   9  * Nicholas A. Bellinger <nab@kernel.org>
  10  *
  11  * This program is free software; you can redistribute it and/or modify
  12  * it under the terms of the GNU General Public License as published by
  13  * the Free Software Foundation; either version 2 of the License, or
  14  * (at your option) any later version.
  15  *
  16  * This program is distributed in the hope that it will be useful,
  17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  * GNU General Public License for more details.
  20  *
  21  * You should have received a copy of the GNU General Public License
  22  * along with this program; if not, write to the Free Software
  23  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  24  */
  25
  26 #include <asm/unaligned.h>
  27 #include <scsi/scsi.h>
  28
  29 #include <target/target_core_base.h>
  30 #include <target/target_core_transport.h>
  31 #include <target/target_core_fabric_ops.h>
  32 #include "target_core_ua.h"
  33
  34 static void
  35 target_fill_alua_data(struct se_port *port, unsigned char *buf)
  36 {
  37         struct t10_alua_tg_pt_gp *tg_pt_gp;
  38         struct t10_alua_tg_pt_gp_member *tg_pt_gp_mem;
  39
  40         /*
  41          * Set SCCS for MAINTENANCE_IN + REPORT_TARGET_PORT_GROUPS.
  42          */
  43         buf[5]  = 0x80;
  44
  45         /*
  46          * Set TPGS field for explict and/or implict ALUA access type
  47          * and opteration.
  48          *
  49          * See spc4r17 section 6.4.2 Table 135
  50          */
  51         if (!port)
  52                 return;
  53         tg_pt_gp_mem = port->sep_alua_tg_pt_gp_mem;
  54         if (!tg_pt_gp_mem)
  55                 return;
  56
  57         spin_lock(&tg_pt_gp_mem->tg_pt_gp_mem_lock);
  58         tg_pt_gp = tg_pt_gp_mem->tg_pt_gp;
  59         if (tg_pt_gp)
  60                 buf[5] |= tg_pt_gp->tg_pt_gp_alua_access_type;
  61         spin_unlock(&tg_pt_gp_mem->tg_pt_gp_mem_lock);
  62 }
  63
  64 static int
  65 target_emulate_inquiry_std(struct se_cmd *cmd)
  66 {
  67         struct se_lun *lun = SE_LUN(cmd);
  68         struct se_device *dev = SE_DEV(cmd);
  69         unsigned char *buf = cmd->t_task->t_task_buf;
  70
  71         /*
  72          * Make sure we at least have 6 bytes of INQUIRY response
  73          * payload going back for EVPD=0
  74          */
  75         if (cmd->data_length < 6) {
  76                 printk(KERN_ERR "SCSI Inquiry payload length: %u"
  77                         " too small for EVPD=0\n", cmd->data_length);
  78                 return -1;
  79         }
  80
  81         buf[0] = dev->transport->get_device_type(dev);
  82         if (buf[0] == TYPE_TAPE)
  83                 buf[1] = 0x80;
  84         buf[2] = dev->transport->get_device_rev(dev);
  85
  86         /*
  87          * Enable SCCS and TPGS fields for Emulated ALUA
  88          */
  89         if (T10_ALUA(dev->se_sub_dev)->alua_type == SPC3_ALUA_EMULATED)
  90                 target_fill_alua_data(lun->lun_sep, buf);
  91
  92         if (cmd->data_length < 8) {
  93                 buf[4] = 1; /* Set additional length to 1 */
  94                 return 0;
  95         }
  96
  97         buf[7] = 0x32; /* Sync=1 and CmdQue=1 */
  98
  99         /*
 100          * Do not include vendor, product, reversion info in INQUIRY
 101          * response payload for cdbs with a small allocation length.
 102          */
 103         if (cmd->data_length < 36) {
 104                 buf[4] = 3; /* Set additional length to 3 */
 105                 return 0;
 106         }
 107
 108         snprintf((unsigned char *)&buf[8], 8, "LIO-ORG");
 109         snprintf((unsigned char *)&buf[16], 16, "%s",
 110                  &DEV_T10_WWN(dev)->model[0]);
 111         snprintf((unsigned char *)&buf[32], 4, "%s",
 112                  &DEV_T10_WWN(dev)->revision[0]);
 113         buf[4] = 31; /* Set additional length to 31 */
 114         return 0;
 115 }
 116
 117 /* supported vital product data pages */
 118 static int
 119 target_emulate_evpd_00(struct se_cmd *cmd, unsigned char *buf)
 120 {
 121         buf[1] = 0x00;
 122         if (cmd->data_length < 8)
 123                 return 0;
 124
 125         buf[4] = 0x0;
 126         /*
 127          * Only report the INQUIRY EVPD=1 pages after a valid NAA
 128          * Registered Extended LUN WWN has been set via ConfigFS
 129          * during device creation/restart.
 130          */
 131         if (SE_DEV(cmd)->se_sub_dev->su_dev_flags &
 132                         SDF_EMULATED_VPD_UNIT_SERIAL) {
 133                 buf[3] = 3;
 134                 buf[5] = 0x80;
 135                 buf[6] = 0x83;
 136                 buf[7] = 0x86;
 137         }
 138
 139         return 0;
 140 }
 141
 142 /* unit serial number */
 143 static int
 144 target_emulate_evpd_80(struct se_cmd *cmd, unsigned char *buf)
 145 {
 146         struct se_device *dev = SE_DEV(cmd);
 147         u16 len = 0;
 148
 149         buf[1] = 0x80;
 150         if (dev->se_sub_dev->su_dev_flags &
 151                         SDF_EMULATED_VPD_UNIT_SERIAL) {
 152                 u32 unit_serial_len;
 153
 154                 unit_serial_len =
 155                         strlen(&DEV_T10_WWN(dev)->unit_serial[0]);
 156                 unit_serial_len++; /* For NULL Terminator */
 157
 158                 if (((len + 4) + unit_serial_len) > cmd->data_length) {
 159                         len += unit_serial_len;
 160                         buf[2] = ((len >> 8) & 0xff);
 161                         buf[3] = (len & 0xff);
 162                         return 0;
 163                 }
 164                 len += sprintf((unsigned char *)&buf[4], "%s",
 165                         &DEV_T10_WWN(dev)->unit_serial[0]);
 166                 len++; /* Extra Byte for NULL Terminator */
 167                 buf[3] = len;
 168         }
 169         return 0;
 170 }
 171
 172 /*
 173  * Device identification VPD, for a complete list of
 174  * DESIGNATOR TYPEs see spc4r17 Table 459.
 175  */
 176 static int
 177 target_emulate_evpd_83(struct se_cmd *cmd, unsigned char *buf)
 178 {
 179         struct se_device *dev = SE_DEV(cmd);
 180         struct se_lun *lun = SE_LUN(cmd);
 181         struct se_port *port = NULL;
 182         struct se_portal_group *tpg = NULL;
 183         struct t10_alua_lu_gp_member *lu_gp_mem;
 184         struct t10_alua_tg_pt_gp *tg_pt_gp;
 185         struct t10_alua_tg_pt_gp_member *tg_pt_gp_mem;
 186         unsigned char binary, binary_new;
 187         unsigned char *prod = &DEV_T10_WWN(dev)->model[0];
 188         u32 prod_len;
 189         u32 unit_serial_len, off = 0;
 190         int i;
 191         u16 len = 0, id_len;
 192
 193         buf[1] = 0x83;
 194         off = 4;
 195
 196         /*
 197          * NAA IEEE Registered Extended Assigned designator format, see
 198          * spc4r17 section 7.7.3.6.5
 199          *
 200          * We depend upon a target_core_mod/ConfigFS provided
 201          * /sys/kernel/config/target/core/$HBA/$DEV/wwn/vpd_unit_serial
 202          * value in order to return the NAA id.
 203          */
 204         if (!(dev->se_sub_dev->su_dev_flags & SDF_EMULATED_VPD_UNIT_SERIAL))
 205                 goto check_t10_vend_desc;
 206
 207         if (off + 20 > cmd->data_length)
 208                 goto check_t10_vend_desc;
 209
 210         /* CODE SET == Binary */
 211         buf[off++] = 0x1;
 212
 213         /* Set ASSOICATION == addressed logical unit: 0)b */
 214         buf[off] = 0x00;
 215
 216         /* Identifier/Designator type == NAA identifier */
 217         buf[off++] = 0x3;
 218         off++;
 219
 220         /* Identifier/Designator length */
 221         buf[off++] = 0x10;
 222
 223         /*
 224          * Start NAA IEEE Registered Extended Identifier/Designator
 225          */
 226         buf[off++] = (0x6 << 4);
 227
 228         /*
 229          * Use OpenFabrics IEEE Company ID: 00 14 05
 230          */
 231         buf[off++] = 0x01;
 232         buf[off++] = 0x40;
 233         buf[off] = (0x5 << 4);
 234
 235         /*
 236          * Return ConfigFS Unit Serial Number information for
 237          * VENDOR_SPECIFIC_IDENTIFIER and
 238          * VENDOR_SPECIFIC_IDENTIFIER_EXTENTION
 239          */
 240         binary = transport_asciihex_to_binaryhex(
 241                                 &DEV_T10_WWN(dev)->unit_serial[0]);
 242         buf[off++] |= (binary & 0xf0) >> 4;
 243         for (i = 0; i < 24; i += 2) {
 244                 binary_new = transport_asciihex_to_binaryhex(
 245                         &DEV_T10_WWN(dev)->unit_serial[i+2]);
 246                 buf[off] = (binary & 0x0f) << 4;
 247                 buf[off++] |= (binary_new & 0xf0) >> 4;
 248                 binary = binary_new;
 249         }
 250         len = 20;
 251         off = (len + 4);
 252
 253 check_t10_vend_desc:
 254         /*
 255          * T10 Vendor Identifier Page, see spc4r17 section 7.7.3.4
 256          */
 257         id_len = 8; /* For Vendor field */
 258         prod_len = 4; /* For VPD Header */
 259         prod_len += 8; /* For Vendor field */
 260         prod_len += strlen(prod);
 261         prod_len++; /* For : */
 262
 263         if (dev->se_sub_dev->su_dev_flags &
 264                         SDF_EMULATED_VPD_UNIT_SERIAL) {
 265                 unit_serial_len =
 266                         strlen(&DEV_T10_WWN(dev)->unit_serial[0]);
 267                 unit_serial_len++; /* For NULL Terminator */
 268
 269                 if ((len + (id_len + 4) +
 270                     (prod_len + unit_serial_len)) >
 271                                 cmd->data_length) {
 272                         len += (prod_len + unit_serial_len);
 273                         goto check_port;
 274                 }
 275                 id_len += sprintf((unsigned char *)&buf[off+12],
 276                                 "%s:%s", prod,
 277                                 &DEV_T10_WWN(dev)->unit_serial[0]);
 278         }
 279         buf[off] = 0x2; /* ASCII */
 280         buf[off+1] = 0x1; /* T10 Vendor ID */
 281         buf[off+2] = 0x0;
 282         memcpy((unsigned char *)&buf[off+4], "LIO-ORG", 8);
 283         /* Extra Byte for NULL Terminator */
 284         id_len++;
 285         /* Identifier Length */
 286         buf[off+3] = id_len;
 287         /* Header size for Designation descriptor */
 288         len += (id_len + 4);
 289         off += (id_len + 4);
 290         /*
 291          * struct se_port is only set for INQUIRY VPD=1 through $FABRIC_MOD
 292          */
 293 check_port:
 294         port = lun->lun_sep;
 295         if (port) {
 296                 struct t10_alua_lu_gp *lu_gp;
 297                 u32 padding, scsi_name_len;
 298                 u16 lu_gp_id = 0;
 299                 u16 tg_pt_gp_id = 0;
 300                 u16 tpgt;
 301
 302                 tpg = port->sep_tpg;
 303                 /*
 304                  * Relative target port identifer, see spc4r17
 305                  * section 7.7.3.7
 306                  *
 307                  * Get the PROTOCOL IDENTIFIER as defined by spc4r17
 308                  * section 7.5.1 Table 362
 309                  */
 310                 if (((len + 4) + 8) > cmd->data_length) {
 311                         len += 8;
 312                         goto check_tpgi;
 313                 }
 314                 buf[off] =
 315                         (TPG_TFO(tpg)->get_fabric_proto_ident(tpg) << 4);
 316                 buf[off++] |= 0x1; /* CODE SET == Binary */
 317                 buf[off] = 0x80; /* Set PIV=1 */
 318                 /* Set ASSOICATION == target port: 01b */
 319                 buf[off] |= 0x10;
 320                 /* DESIGNATOR TYPE == Relative target port identifer */
 321                 buf[off++] |= 0x4;
 322                 off++; /* Skip over Reserved */
 323                 buf[off++] = 4; /* DESIGNATOR LENGTH */
 324                 /* Skip over Obsolete field in RTPI payload
 325                  * in Table 472 */
 326                 off += 2;
 327                 buf[off++] = ((port->sep_rtpi >> 8) & 0xff);
 328                 buf[off++] = (port->sep_rtpi & 0xff);
 329                 len += 8; /* Header size + Designation descriptor */
 330                 /*
 331                  * Target port group identifier, see spc4r17
 332                  * section 7.7.3.8
 333                  *
 334                  * Get the PROTOCOL IDENTIFIER as defined by spc4r17
 335                  * section 7.5.1 Table 362
 336                  */
 337 check_tpgi:
 338                 if (T10_ALUA(dev->se_sub_dev)->alua_type !=
 339                                 SPC3_ALUA_EMULATED)
 340                         goto check_scsi_name;
 341
 342                 if (((len + 4) + 8) > cmd->data_length) {
 343                         len += 8;
 344                         goto check_lu_gp;
 345                 }
 346                 tg_pt_gp_mem = port->sep_alua_tg_pt_gp_mem;
 347                 if (!tg_pt_gp_mem)
 348                         goto check_lu_gp;
 349
 350                 spin_lock(&tg_pt_gp_mem->tg_pt_gp_mem_lock);
 351                 tg_pt_gp = tg_pt_gp_mem->tg_pt_gp;
 352                 if (!(tg_pt_gp)) {
 353                         spin_unlock(&tg_pt_gp_mem->tg_pt_gp_mem_lock);
 354                         goto check_lu_gp;
 355                 }
 356                 tg_pt_gp_id = tg_pt_gp->tg_pt_gp_id;
 357                 spin_unlock(&tg_pt_gp_mem->tg_pt_gp_mem_lock);
 358
 359                 buf[off] =
 360                         (TPG_TFO(tpg)->get_fabric_proto_ident(tpg) << 4);
 361                 buf[off++] |= 0x1; /* CODE SET == Binary */
 362                 buf[off] = 0x80; /* Set PIV=1 */
 363                 /* Set ASSOICATION == target port: 01b */
 364                 buf[off] |= 0x10;
 365                 /* DESIGNATOR TYPE == Target port group identifier */
 366                 buf[off++] |= 0x5;
 367                 off++; /* Skip over Reserved */
 368                 buf[off++] = 4; /* DESIGNATOR LENGTH */
 369                 off += 2; /* Skip over Reserved Field */
 370                 buf[off++] = ((tg_pt_gp_id >> 8) & 0xff);
 371                 buf[off++] = (tg_pt_gp_id & 0xff);
 372                 len += 8; /* Header size + Designation descriptor */
 373                 /*
 374                  * Logical Unit Group identifier, see spc4r17
 375                  * section 7.7.3.8
 376                  */
 377 check_lu_gp:
 378                 if (((len + 4) + 8) > cmd->data_length) {
 379                         len += 8;
 380                         goto check_scsi_name;
 381                 }
 382                 lu_gp_mem = dev->dev_alua_lu_gp_mem;
 383                 if (!(lu_gp_mem))
 384                         goto check_scsi_name;
 385
 386                 spin_lock(&lu_gp_mem->lu_gp_mem_lock);
 387                 lu_gp = lu_gp_mem->lu_gp;
 388                 if (!(lu_gp)) {
 389                         spin_unlock(&lu_gp_mem->lu_gp_mem_lock);
 390                         goto check_scsi_name;
 391                 }
 392                 lu_gp_id = lu_gp->lu_gp_id;
 393                 spin_unlock(&lu_gp_mem->lu_gp_mem_lock);
 394
 395                 buf[off++] |= 0x1; /* CODE SET == Binary */
 396                 /* DESIGNATOR TYPE == Logical Unit Group identifier */
 397                 buf[off++] |= 0x6;
 398                 off++; /* Skip over Reserved */
 399                 buf[off++] = 4; /* DESIGNATOR LENGTH */
 400                 off += 2; /* Skip over Reserved Field */
 401                 buf[off++] = ((lu_gp_id >> 8) & 0xff);
 402                 buf[off++] = (lu_gp_id & 0xff);
 403                 len += 8; /* Header size + Designation descriptor */
 404                 /*
 405                  * SCSI name string designator, see spc4r17
 406                  * section 7.7.3.11
 407                  *
 408                  * Get the PROTOCOL IDENTIFIER as defined by spc4r17
 409                  * section 7.5.1 Table 362
 410                  */
 411 check_scsi_name:
 412                 scsi_name_len = strlen(TPG_TFO(tpg)->tpg_get_wwn(tpg));
 413                 /* UTF-8 ",t,0x<16-bit TPGT>" + NULL Terminator */
 414                 scsi_name_len += 10;
 415                 /* Check for 4-byte padding */
 416                 padding = ((-scsi_name_len) & 3);
 417                 if (padding != 0)
 418                         scsi_name_len += padding;
 419                 /* Header size + Designation descriptor */
 420                 scsi_name_len += 4;
 421
 422                 if (((len + 4) + scsi_name_len) > cmd->data_length) {
 423                         len += scsi_name_len;
 424                         goto set_len;
 425                 }
 426                 buf[off] =
 427                         (TPG_TFO(tpg)->get_fabric_proto_ident(tpg) << 4);
 428                 buf[off++] |= 0x3; /* CODE SET == UTF-8 */
 429                 buf[off] = 0x80; /* Set PIV=1 */
 430                 /* Set ASSOICATION == target port: 01b */
 431                 buf[off] |= 0x10;
 432                 /* DESIGNATOR TYPE == SCSI name string */
 433                 buf[off++] |= 0x8;
 434                 off += 2; /* Skip over Reserved and length */
 435                 /*
 436                  * SCSI name string identifer containing, $FABRIC_MOD
 437                  * dependent information.  For LIO-Target and iSCSI
 438                  * Target Port, this means "<iSCSI name>,t,0x<TPGT> in
 439                  * UTF-8 encoding.
 440                  */
 441                 tpgt = TPG_TFO(tpg)->tpg_get_tag(tpg);
 442                 scsi_name_len = sprintf(&buf[off], "%s,t,0x%04x",
 443                                         TPG_TFO(tpg)->tpg_get_wwn(tpg), tpgt);
 444                 scsi_name_len += 1 /* Include  NULL terminator */;
 445                 /*
 446                  * The null-terminated, null-padded (see 4.4.2) SCSI
 447                  * NAME STRING field contains a UTF-8 format string.
 448                  * The number of bytes in the SCSI NAME STRING field
 449                  * (i.e., the value in the DESIGNATOR LENGTH field)
 450                  * shall be no larger than 256 and shall be a multiple
 451                  * of four.
 452                  */
 453                 if (padding)
 454                         scsi_name_len += padding;
 455
 456                 buf[off-1] = scsi_name_len;
 457                 off += scsi_name_len;
 458                 /* Header size + Designation descriptor */
 459                 len += (scsi_name_len + 4);
 460         }
 461 set_len:
 462         buf[2] = ((len >> 8) & 0xff);
 463         buf[3] = (len & 0xff); /* Page Length for VPD 0x83 */
 464         return 0;
 465 }
 466
 467 /* Extended INQUIRY Data VPD Page */
 468 static int
 469 target_emulate_evpd_86(struct se_cmd *cmd, unsigned char *buf)
 470 {
 471         if (cmd->data_length < 60)
 472                 return 0;
 473
 474         buf[1] = 0x86;
 475         buf[2] = 0x3c;
 476         /* Set HEADSUP, ORDSUP, SIMPSUP */
 477         buf[5] = 0x07;
 478
 479         /* If WriteCache emulation is enabled, set V_SUP */
 480         if (DEV_ATTRIB(SE_DEV(cmd))->emulate_write_cache > 0)
 481                 buf[6] = 0x01;
 482         return 0;
 483 }
 484
 485 /* Block Limits VPD page */
 486 static int
 487 target_emulate_evpd_b0(struct se_cmd *cmd, unsigned char *buf)
 488 {
 489         struct se_device *dev = SE_DEV(cmd);
 490         int have_tp = 0;
 491
 492         /*
 493          * Following sbc3r22 section 6.5.3 Block Limits VPD page, when
 494          * emulate_tpu=1 or emulate_tpws=1 we will be expect a
 495          * different page length for Thin Provisioning.
 496          */
 497         if (DEV_ATTRIB(dev)->emulate_tpu || DEV_ATTRIB(dev)->emulate_tpws)
 498                 have_tp = 1;
 499
 500         if (cmd->data_length < (0x10 + 4)) {
 501                 printk(KERN_INFO "Received data_length: %u"
 502                         " too small for EVPD 0xb0\n",
 503                         cmd->data_length);
 504                 return -1;
 505         }
 506
 507         if (have_tp && cmd->data_length < (0x3c + 4)) {
 508                 printk(KERN_INFO "Received data_length: %u"
 509                         " too small for TPE=1 EVPD 0xb0\n",
 510                         cmd->data_length);
 511                 have_tp = 0;
 512         }
 513
 514         buf[0] = dev->transport->get_device_type(dev);
 515         buf[1] = 0xb0;
 516         buf[3] = have_tp ? 0x3c : 0x10;
 517
 518         /*
 519          * Set OPTIMAL TRANSFER LENGTH GRANULARITY
 520          */
 521         put_unaligned_be16(1, &buf[6]);
 522
 523         /*
 524          * Set MAXIMUM TRANSFER LENGTH
 525          */
 526         put_unaligned_be32(DEV_ATTRIB(dev)->max_sectors, &buf[8]);
 527
 528         /*
 529          * Set OPTIMAL TRANSFER LENGTH
 530          */
 531         put_unaligned_be32(DEV_ATTRIB(dev)->optimal_sectors, &buf[12]);
 532
 533         /*
 534          * Exit now if we don't support TP or the initiator sent a too
 535          * short buffer.
 536          */
 537         if (!have_tp || cmd->data_length < (0x3c + 4))
 538                 return 0;
 539
 540         /*
 541          * Set MAXIMUM UNMAP LBA COUNT
 542          */
 543         put_unaligned_be32(DEV_ATTRIB(dev)->max_unmap_lba_count, &buf[20]);
 544
 545         /*
 546          * Set MAXIMUM UNMAP BLOCK DESCRIPTOR COUNT
 547          */
 548         put_unaligned_be32(DEV_ATTRIB(dev)->max_unmap_block_desc_count,
 549                            &buf[24]);
 550
 551         /*
 552          * Set OPTIMAL UNMAP GRANULARITY
 553          */
 554         put_unaligned_be32(DEV_ATTRIB(dev)->unmap_granularity, &buf[28]);
 555
 556         /*
 557          * UNMAP GRANULARITY ALIGNMENT
 558          */
 559         put_unaligned_be32(DEV_ATTRIB(dev)->unmap_granularity_alignment,
 560                            &buf[32]);
 561         if (DEV_ATTRIB(dev)->unmap_granularity_alignment != 0)
 562                 buf[32] |= 0x80; /* Set the UGAVALID bit */
 563
 564         return 0;
 565 }
 566
 567 /* Thin Provisioning VPD */
 568 static int
 569 target_emulate_evpd_b2(struct se_cmd *cmd, unsigned char *buf)
 570 {
 571         struct se_device *dev = SE_DEV(cmd);
 572
 573         /*
 574          * From sbc3r22 section 6.5.4 Thin Provisioning VPD page:
 575          *
 576          * The PAGE LENGTH field is defined in SPC-4. If the DP bit is set to
 577          * zero, then the page length shall be set to 0004h.  If the DP bit
 578          * is set to one, then the page length shall be set to the value
 579          * defined in table 162.
 580          */
 581         buf[0] = dev->transport->get_device_type(dev);
 582         buf[1] = 0xb2;
 583
 584         /*
 585          * Set Hardcoded length mentioned above for DP=0
 586          */
 587         put_unaligned_be16(0x0004, &buf[2]);
 588
 589         /*
 590          * The THRESHOLD EXPONENT field indicates the threshold set size in
 591          * LBAs as a power of 2 (i.e., the threshold set size is equal to
 592          * 2(threshold exponent)).
 593          *
 594          * Note that this is currently set to 0x00 as mkp says it will be
 595          * changing again.  We can enable this once it has settled in T10
 596          * and is actually used by Linux/SCSI ML code.
 597          */
 598         buf[4] = 0x00;
 599
 600         /*
 601          * A TPU bit set to one indicates that the device server supports
 602          * the UNMAP command (see 5.25). A TPU bit set to zero indicates
 603          * that the device server does not support the UNMAP command.
 604          */
 605         if (DEV_ATTRIB(dev)->emulate_tpu != 0)
 606                 buf[5] = 0x80;
 607
 608         /*
 609          * A TPWS bit set to one indicates that the device server supports
 610          * the use of the WRITE SAME (16) command (see 5.42) to unmap LBAs.
 611          * A TPWS bit set to zero indicates that the device server does not
 612          * support the use of the WRITE SAME (16) command to unmap LBAs.
 613          */
 614         if (DEV_ATTRIB(dev)->emulate_tpws != 0)
 615                 buf[5] |= 0x40;
 616
 617         return 0;
 618 }
 619
 620 static int
 621 target_emulate_inquiry(struct se_cmd *cmd)
 622 {
 623         struct se_device *dev = SE_DEV(cmd);
 624         unsigned char *buf = cmd->t_task->t_task_buf;
 625         unsigned char *cdb = cmd->t_task->t_task_cdb;
 626
 627         if (!(cdb[1] & 0x1))
 628                 return target_emulate_inquiry_std(cmd);
 629
 630         /*
 631          * Make sure we at least have 4 bytes of INQUIRY response
 632          * payload for 0x00 going back for EVPD=1.  Note that 0x80
 633          * and 0x83 will check for enough payload data length and
 634          * jump to set_len: label when there is not enough inquiry EVPD
 635          * payload length left for the next outgoing EVPD metadata
 636          */
 637         if (cmd->data_length < 4) {
 638                 printk(KERN_ERR "SCSI Inquiry payload length: %u"
 639                         " too small for EVPD=1\n", cmd->data_length);
 640                 return -1;
 641         }
 642         buf[0] = dev->transport->get_device_type(dev);
 643
 644         switch (cdb[2]) {
 645         case 0x00:
 646                 return target_emulate_evpd_00(cmd, buf);
 647         case 0x80:
 648                 return target_emulate_evpd_80(cmd, buf);
 649         case 0x83:
 650                 return target_emulate_evpd_83(cmd, buf);
 651         case 0x86:
 652                 return target_emulate_evpd_86(cmd, buf);
 653         case 0xb0:
 654                 return target_emulate_evpd_b0(cmd, buf);
 655         case 0xb2:
 656                 return target_emulate_evpd_b2(cmd, buf);
 657         default:
 658                 printk(KERN_ERR "Unknown VPD Code: 0x%02x\n", cdb[2]);
 659                 return -1;
 660         }
 661
 662         return 0;
 663 }
 664
 665 static int
 666 target_emulate_readcapacity(struct se_cmd *cmd)
 667 {
 668         struct se_device *dev = SE_DEV(cmd);
 669         unsigned char *buf = cmd->t_task->t_task_buf;
 670         u32 blocks = dev->transport->get_blocks(dev);
 671
 672         buf[0] = (blocks >> 24) & 0xff;
 673         buf[1] = (blocks >> 16) & 0xff;
 674         buf[2] = (blocks >> 8) & 0xff;
 675         buf[3] = blocks & 0xff;
 676         buf[4] = (DEV_ATTRIB(dev)->block_size >> 24) & 0xff;
 677         buf[5] = (DEV_ATTRIB(dev)->block_size >> 16) & 0xff;
 678         buf[6] = (DEV_ATTRIB(dev)->block_size >> 8) & 0xff;
 679         buf[7] = DEV_ATTRIB(dev)->block_size & 0xff;
 680         /*
 681          * Set max 32-bit blocks to signal SERVICE ACTION READ_CAPACITY_16
 682         */
 683         if (DEV_ATTRIB(dev)->emulate_tpu || DEV_ATTRIB(dev)->emulate_tpws)
 684                 put_unaligned_be32(0xFFFFFFFF, &buf[0]);
 685
 686         return 0;
 687 }
 688
 689 static int
 690 target_emulate_readcapacity_16(struct se_cmd *cmd)
 691 {
 692         struct se_device *dev = SE_DEV(cmd);
 693         unsigned char *buf = cmd->t_task->t_task_buf;
 694         unsigned long long blocks = dev->transport->get_blocks(dev);
 695
 696         buf[0] = (blocks >> 56) & 0xff;
 697         buf[1] = (blocks >> 48) & 0xff;
 698         buf[2] = (blocks >> 40) & 0xff;
 699         buf[3] = (blocks >> 32) & 0xff;
 700         buf[4] = (blocks >> 24) & 0xff;
 701         buf[5] = (blocks >> 16) & 0xff;
 702         buf[6] = (blocks >> 8) & 0xff;
 703         buf[7] = blocks & 0xff;
 704         buf[8] = (DEV_ATTRIB(dev)->block_size >> 24) & 0xff;
 705         buf[9] = (DEV_ATTRIB(dev)->block_size >> 16) & 0xff;
 706         buf[10] = (DEV_ATTRIB(dev)->block_size >> 8) & 0xff;
 707         buf[11] = DEV_ATTRIB(dev)->block_size & 0xff;
 708         /*
 709          * Set Thin Provisioning Enable bit following sbc3r22 in section
 710          * READ CAPACITY (16) byte 14 if emulate_tpu or emulate_tpws is enabled.
 711          */
 712         if (DEV_ATTRIB(dev)->emulate_tpu || DEV_ATTRIB(dev)->emulate_tpws)
 713                 buf[14] = 0x80;
 714
 715         return 0;
 716 }
 717
 718 static int
 719 target_modesense_rwrecovery(unsigned char *p)
 720 {
 721         p[0] = 0x01;
 722         p[1] = 0x0a;
 723
 724         return 12;
 725 }
 726
 727 static int
 728 target_modesense_control(struct se_device *dev, unsigned char *p)
 729 {
 730         p[0] = 0x0a;
 731         p[1] = 0x0a;
 732         p[2] = 2;
 733         /*
 734          * From spc4r17, section 7.4.6 Control mode Page
 735          *
 736          * Unit Attention interlocks control (UN_INTLCK_CTRL) to code 00b
 737          *
 738          * 00b: The logical unit shall clear any unit attention condition
 739          * reported in the same I_T_L_Q nexus transaction as a CHECK CONDITION
 740          * status and shall not establish a unit attention condition when a com-
 741          * mand is completed with BUSY, TASK SET FULL, or RESERVATION CONFLICT
 742          * status.
 743          *
 744          * 10b: The logical unit shall not clear any unit attention condition
 745          * reported in the same I_T_L_Q nexus transaction as a CHECK CONDITION
 746          * status and shall not establish a unit attention condition when
 747          * a command is completed with BUSY, TASK SET FULL, or RESERVATION
 748          * CONFLICT status.
 749          *
 750          * 11b a The logical unit shall not clear any unit attention condition
 751          * reported in the same I_T_L_Q nexus transaction as a CHECK CONDITION
 752          * status and shall establish a unit attention condition for the
 753          * initiator port associated with the I_T nexus on which the BUSY,
 754          * TASK SET FULL, or RESERVATION CONFLICT status is being returned.
 755          * Depending on the status, the additional sense code shall be set to
 756          * PREVIOUS BUSY STATUS, PREVIOUS TASK SET FULL STATUS, or PREVIOUS
 757          * RESERVATION CONFLICT STATUS. Until it is cleared by a REQUEST SENSE
 758          * command, a unit attention condition shall be established only once
 759          * for a BUSY, TASK SET FULL, or RESERVATION CONFLICT status regardless
 760          * to the number of commands completed with one of those status codes.
 761          */
 762         p[4] = (DEV_ATTRIB(dev)->emulate_ua_intlck_ctrl == 2) ? 0x30 :
 763                (DEV_ATTRIB(dev)->emulate_ua_intlck_ctrl == 1) ? 0x20 : 0x00;
 764         /*
 765          * From spc4r17, section 7.4.6 Control mode Page
 766          *
 767          * Task Aborted Status (TAS) bit set to zero.
 768          *
 769          * A task aborted status (TAS) bit set to zero specifies that aborted
 770          * tasks shall be terminated by the device server without any response
 771          * to the application client. A TAS bit set to one specifies that tasks
 772          * aborted by the actions of an I_T nexus other than the I_T nexus on
 773          * which the command was received shall be completed with TASK ABORTED
 774          * status (see SAM-4).
 775          */
 776         p[5] = (DEV_ATTRIB(dev)->emulate_tas) ? 0x40 : 0x00;
 777         p[8] = 0xff;
 778         p[9] = 0xff;
 779         p[11] = 30;
 780
 781         return 12;
 782 }
 783
 784 static int
 785 target_modesense_caching(struct se_device *dev, unsigned char *p)
 786 {
 787         p[0] = 0x08;
 788         p[1] = 0x12;
 789         if (DEV_ATTRIB(dev)->emulate_write_cache > 0)
 790                 p[2] = 0x04; /* Write Cache Enable */
 791         p[12] = 0x20; /* Disabled Read Ahead */
 792
 793         return 20;
 794 }
 795
 796 static void
 797 target_modesense_write_protect(unsigned char *buf, int type)
 798 {
 799         /*
 800          * I believe that the WP bit (bit 7) in the mode header is the same for
 801          * all device types..
 802          */
 803         switch (type) {
 804         case TYPE_DISK:
 805         case TYPE_TAPE:
 806         default:
 807                 buf[0] |= 0x80; /* WP bit */
 808                 break;
 809         }
 810 }
 811
 812 static void
 813 target_modesense_dpofua(unsigned char *buf, int type)
 814 {
 815         switch (type) {
 816         case TYPE_DISK:
 817                 buf[0] |= 0x10; /* DPOFUA bit */
 818                 break;
 819         default:
 820                 break;
 821         }
 822 }
 823
 824 static int
 825 target_emulate_modesense(struct se_cmd *cmd, int ten)
 826 {
 827         struct se_device *dev = SE_DEV(cmd);
 828         char *cdb = cmd->t_task->t_task_cdb;
 829         unsigned char *rbuf = cmd->t_task->t_task_buf;
 830         int type = dev->transport->get_device_type(dev);
 831         int offset = (ten) ? 8 : 4;
 832         int length = 0;
 833         unsigned char buf[SE_MODE_PAGE_BUF];
 834
 835         memset(buf, 0, SE_MODE_PAGE_BUF);
 836
 837         switch (cdb[2] & 0x3f) {
 838         case 0x01:
 839                 length = target_modesense_rwrecovery(&buf[offset]);
 840                 break;
 841         case 0x08:
 842                 length = target_modesense_caching(dev, &buf[offset]);
 843                 break;
 844         case 0x0a:
 845                 length = target_modesense_control(dev, &buf[offset]);
 846                 break;
 847         case 0x3f:
 848                 length = target_modesense_rwrecovery(&buf[offset]);
 849                 length += target_modesense_caching(dev, &buf[offset+length]);
 850                 length += target_modesense_control(dev, &buf[offset+length]);
 851                 break;
 852         default:
 853                 printk(KERN_ERR "Got Unknown Mode Page: 0x%02x\n",
 854                                 cdb[2] & 0x3f);
 855                 return PYX_TRANSPORT_UNKNOWN_MODE_PAGE;
 856         }
 857         offset += length;
 858
 859         if (ten) {
 860                 offset -= 2;
 861                 buf[0] = (offset >> 8) & 0xff;
 862                 buf[1] = offset & 0xff;
 863
 864                 if ((SE_LUN(cmd)->lun_access & TRANSPORT_LUNFLAGS_READ_ONLY) ||
 865                     (cmd->se_deve &&
 866                     (cmd->se_deve->lun_flags & TRANSPORT_LUNFLAGS_READ_ONLY)))
 867                         target_modesense_write_protect(&buf[3], type);
 868
 869                 if ((DEV_ATTRIB(dev)->emulate_write_cache > 0) &&
 870                     (DEV_ATTRIB(dev)->emulate_fua_write > 0))
 871                         target_modesense_dpofua(&buf[3], type);
 872
 873                 if ((offset + 2) > cmd->data_length)
 874                         offset = cmd->data_length;
 875
 876         } else {
 877                 offset -= 1;
 878                 buf[0] = offset & 0xff;
 879
 880                 if ((SE_LUN(cmd)->lun_access & TRANSPORT_LUNFLAGS_READ_ONLY) ||
 881                     (cmd->se_deve &&
 882                     (cmd->se_deve->lun_flags & TRANSPORT_LUNFLAGS_READ_ONLY)))
 883                         target_modesense_write_protect(&buf[2], type);
 884
 885                 if ((DEV_ATTRIB(dev)->emulate_write_cache > 0) &&
 886                     (DEV_ATTRIB(dev)->emulate_fua_write > 0))
 887                         target_modesense_dpofua(&buf[2], type);
 888
 889                 if ((offset + 1) > cmd->data_length)
 890                         offset = cmd->data_length;
 891         }
 892         memcpy(rbuf, buf, offset);
 893
 894         return 0;
 895 }
 896
 897 static int
 898 target_emulate_request_sense(struct se_cmd *cmd)
 899 {
 900         unsigned char *cdb = cmd->t_task->t_task_cdb;
 901         unsigned char *buf = cmd->t_task->t_task_buf;
 902         u8 ua_asc = 0, ua_ascq = 0;
 903
 904         if (cdb[1] & 0x01) {
 905                 printk(KERN_ERR "REQUEST_SENSE description emulation not"
 906                         " supported\n");
 907                 return PYX_TRANSPORT_INVALID_CDB_FIELD;
 908         }
 909         if (!(core_scsi3_ua_clear_for_request_sense(cmd, &ua_asc, &ua_ascq))) {
 910                 /*
 911                  * CURRENT ERROR, UNIT ATTENTION
 912                  */
 913                 buf[0] = 0x70;
 914                 buf[SPC_SENSE_KEY_OFFSET] = UNIT_ATTENTION;
 915                 /*
 916                  * Make sure request data length is enough for additional
 917                  * sense data.
 918                  */
 919                 if (cmd->data_length <= 18) {
 920                         buf[7] = 0x00;
 921                         return 0;
 922                 }
 923                 /*
 924                  * The Additional Sense Code (ASC) from the UNIT ATTENTION
 925                  */
 926                 buf[SPC_ASC_KEY_OFFSET] = ua_asc;
 927                 buf[SPC_ASCQ_KEY_OFFSET] = ua_ascq;
 928                 buf[7] = 0x0A;
 929         } else {
 930                 /*
 931                  * CURRENT ERROR, NO SENSE
 932                  */
 933                 buf[0] = 0x70;
 934                 buf[SPC_SENSE_KEY_OFFSET] = NO_SENSE;
 935                 /*
 936                  * Make sure request data length is enough for additional
 937                  * sense data.
 938                  */
 939                 if (cmd->data_length <= 18) {
 940                         buf[7] = 0x00;
 941                         return 0;
 942                 }
 943                 /*
 944                  * NO ADDITIONAL SENSE INFORMATION
 945                  */
 946                 buf[SPC_ASC_KEY_OFFSET] = 0x00;
 947                 buf[7] = 0x0A;
 948         }
 949
 950         return 0;
 951 }
 952
 953 /*
 954  * Used for TCM/IBLOCK and TCM/FILEIO for block/blk-lib.c level discard support.
 955  * Note this is not used for TCM/pSCSI passthrough
 956  */
 957 static int
 958 target_emulate_unmap(struct se_task *task)
 959 {
 960         struct se_cmd *cmd = TASK_CMD(task);
 961         struct se_device *dev = SE_DEV(cmd);
 962         unsigned char *buf = cmd->t_task->t_task_buf, *ptr = NULL;
 963         unsigned char *cdb = &cmd->t_task->t_task_cdb[0];
 964         sector_t lba;
 965         unsigned int size = cmd->data_length, range;
 966         int ret, offset;
 967         unsigned short dl, bd_dl;
 968
 969         /* First UNMAP block descriptor starts at 8 byte offset */
 970         offset = 8;
 971         size -= 8;
 972         dl = get_unaligned_be16(&cdb[0]);
 973         bd_dl = get_unaligned_be16(&cdb[2]);
 974         ptr = &buf[offset];
 975         printk(KERN_INFO "UNMAP: Sub: %s Using dl: %hu bd_dl: %hu size: %hu"
 976                 " ptr: %p\n", dev->transport->name, dl, bd_dl, size, ptr);
 977
 978         while (size) {
 979                 lba = get_unaligned_be64(&ptr[0]);
 980                 range = get_unaligned_be32(&ptr[8]);
 981                 printk(KERN_INFO "UNMAP: Using lba: %llu and range: %u\n",
 982                                  (unsigned long long)lba, range);
 983
 984                 ret = dev->transport->do_discard(dev, lba, range);
 985                 if (ret < 0) {
 986                         printk(KERN_ERR "blkdev_issue_discard() failed: %d\n",
 987                                         ret);
 988                         return -1;
 989                 }
 990
 991                 ptr += 16;
 992                 size -= 16;
 993         }
 994
 995         task->task_scsi_status = GOOD;
 996         transport_complete_task(task, 1);
 997         return 0;
 998 }
 999
1000 /*
1001  * Used for TCM/IBLOCK and TCM/FILEIO for block/blk-lib.c level discard support.
1002  * Note this is not used for TCM/pSCSI passthrough
1003  */
1004 static int
1005 target_emulate_write_same(struct se_task *task)
1006 {
1007         struct se_cmd *cmd = TASK_CMD(task);
1008         struct se_device *dev = SE_DEV(cmd);
1009         sector_t lba = cmd->t_task->t_task_lba;
1010         unsigned int range;
1011         int ret;
1012
1013         range = (cmd->data_length / DEV_ATTRIB(dev)->block_size);
1014
1015         printk(KERN_INFO "WRITE_SAME UNMAP: LBA: %llu Range: %u\n",
1016                          (unsigned long long)lba, range);
1017
1018         ret = dev->transport->do_discard(dev, lba, range);
1019         if (ret < 0) {
1020                 printk(KERN_INFO "blkdev_issue_discard() failed for WRITE_SAME\n");
1021                 return -1;
1022         }
1023
1024         task->task_scsi_status = GOOD;
1025         transport_complete_task(task, 1);
1026         return 0;
1027 }
1028
1029 int
1030 transport_emulate_control_cdb(struct se_task *task)
1031 {
1032         struct se_cmd *cmd = TASK_CMD(task);
1033         struct se_device *dev = SE_DEV(cmd);
1034         unsigned short service_action;
1035         int ret = 0;
1036
1037         switch (cmd->t_task->t_task_cdb[0]) {
1038         case INQUIRY:
1039                 ret = target_emulate_inquiry(cmd);
1040                 break;
1041         case READ_CAPACITY:
1042                 ret = target_emulate_readcapacity(cmd);
1043                 break;
1044         case MODE_SENSE:
1045                 ret = target_emulate_modesense(cmd, 0);
1046                 break;
1047         case MODE_SENSE_10:
1048                 ret = target_emulate_modesense(cmd, 1);
1049                 break;
1050         case SERVICE_ACTION_IN:
1051                 switch (cmd->t_task->t_task_cdb[1] & 0x1f) {
1052                 case SAI_READ_CAPACITY_16:
1053                         ret = target_emulate_readcapacity_16(cmd);
1054                         break;
1055                 default:
1056                         printk(KERN_ERR "Unsupported SA: 0x%02x\n",
1057                                 cmd->t_task->t_task_cdb[1] & 0x1f);
1058                         return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
1059                 }
1060                 break;
1061         case REQUEST_SENSE:
1062                 ret = target_emulate_request_sense(cmd);
1063                 break;
1064         case UNMAP:
1065                 if (!dev->transport->do_discard) {
1066                         printk(KERN_ERR "UNMAP emulation not supported for: %s\n",
1067                                         dev->transport->name);
1068                         return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
1069                 }
1070                 ret = target_emulate_unmap(task);
1071                 break;
1072         case WRITE_SAME_16:
1073                 if (!dev->transport->do_discard) {
1074                         printk(KERN_ERR "WRITE_SAME_16 emulation not supported"
1075                                         " for: %s\n", dev->transport->name);
1076                         return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
1077                 }
1078                 ret = target_emulate_write_same(task);
1079                 break;
1080         case VARIABLE_LENGTH_CMD:
1081                 service_action =
1082                         get_unaligned_be16(&cmd->t_task->t_task_cdb[8]);
1083                 switch (service_action) {
1084                 case WRITE_SAME_32:
1085                         if (!dev->transport->do_discard) {
1086                                 printk(KERN_ERR "WRITE_SAME_32 SA emulation not"
1087                                         " supported for: %s\n",
1088                                         dev->transport->name);
1089                                 return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
1090                         }
1091                         ret = target_emulate_write_same(task);
1092                         break;
1093                 default:
1094                         printk(KERN_ERR "Unsupported VARIABLE_LENGTH_CMD SA:"
1095                                         " 0x%02x\n", service_action);
1096                         break;
1097                 }
1098                 break;
1099         case SYNCHRONIZE_CACHE:
1100         case 0x91: /* SYNCHRONIZE_CACHE_16: */
1101                 if (!dev->transport->do_sync_cache) {
1102                         printk(KERN_ERR
1103                                 "SYNCHRONIZE_CACHE emulation not supported"
1104                                 " for: %s\n", dev->transport->name);
1105                         return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
1106                 }
1107                 dev->transport->do_sync_cache(task);
1108                 break;
1109         case ALLOW_MEDIUM_REMOVAL:
1110         case ERASE:
1111         case REZERO_UNIT:
1112         case SEEK_10:
1113         case SPACE:
1114         case START_STOP:
1115         case TEST_UNIT_READY:
1116         case VERIFY:
1117         case WRITE_FILEMARKS:
1118                 break;
1119         default:
1120                 printk(KERN_ERR "Unsupported SCSI Opcode: 0x%02x for %s\n",
1121                         cmd->t_task->t_task_cdb[0], dev->transport->name);
1122                 return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
1123         }
1124
1125         if (ret < 0)
1126                 return ret;
1127         task->task_scsi_status = GOOD;
1128         transport_complete_task(task, 1);
1129
1130         return PYX_TRANSPORT_SENT_TO_TRANSPORT;
1131 }