?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
b43: Use SSB block-I/O to do PIO
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / net / wireless / rtl8180_dev.c
blobc181f23e930dc96048f3b1d700434bbf92a6a26b
1
2 /*
3 * Linux device driver for RTL8180 / RTL8185
4 *
5 * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
6 * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
7 *
8 * Based on the r8180 driver, which is:
9 * Copyright 2004-2005 Andrea Merello <andreamrl@tiscali.it>, et al.
10 *
11 * Thanks to Realtek for their support!
12 *
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License version 2 as
15 * published by the Free Software Foundation.
16 */
17
18 #include <linux/init.h>
19 #include <linux/pci.h>
20 #include <linux/delay.h>
21 #include <linux/etherdevice.h>
22 #include <linux/eeprom_93cx6.h>
23 #include <net/mac80211.h>
24
25 #include "rtl8180.h"
26 #include "rtl8180_rtl8225.h"
27 #include "rtl8180_sa2400.h"
28 #include "rtl8180_max2820.h"
29 #include "rtl8180_grf5101.h"
30
31 MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
32 MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>");
33 MODULE_DESCRIPTION("RTL8180 / RTL8185 PCI wireless driver");
34 MODULE_LICENSE("GPL");
35
36 static struct pci_device_id rtl8180_table[] __devinitdata = {
37 /* rtl8185 */
38 { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8185) },
39 { PCI_DEVICE(PCI_VENDOR_ID_BELKIN, 0x700f) },
40 { PCI_DEVICE(PCI_VENDOR_ID_BELKIN, 0x701f) },
41
42 /* rtl8180 */
43 { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8180) },
44 { PCI_DEVICE(0x1799, 0x6001) },
45 { PCI_DEVICE(0x1799, 0x6020) },
46 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x3300) },
47 { }
48 };
49
50 MODULE_DEVICE_TABLE(pci, rtl8180_table);
51
52 static const struct ieee80211_rate rtl818x_rates[] = {
53 { .bitrate = 10, .hw_value = 0, },
54 { .bitrate = 20, .hw_value = 1, },
55 { .bitrate = 55, .hw_value = 2, },
56 { .bitrate = 110, .hw_value = 3, },
57 { .bitrate = 60, .hw_value = 4, },
58 { .bitrate = 90, .hw_value = 5, },
59 { .bitrate = 120, .hw_value = 6, },
60 { .bitrate = 180, .hw_value = 7, },
61 { .bitrate = 240, .hw_value = 8, },
62 { .bitrate = 360, .hw_value = 9, },
63 { .bitrate = 480, .hw_value = 10, },
64 { .bitrate = 540, .hw_value = 11, },
65 };
66
67 static const struct ieee80211_channel rtl818x_channels[] = {
68 { .center_freq = 2412 },
69 { .center_freq = 2417 },
70 { .center_freq = 2422 },
71 { .center_freq = 2427 },
72 { .center_freq = 2432 },
73 { .center_freq = 2437 },
74 { .center_freq = 2442 },
75 { .center_freq = 2447 },
76 { .center_freq = 2452 },
77 { .center_freq = 2457 },
78 { .center_freq = 2462 },
79 { .center_freq = 2467 },
80 { .center_freq = 2472 },
81 { .center_freq = 2484 },
82 };
83
84
85
86
87 void rtl8180_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data)
88 {
89 struct rtl8180_priv *priv = dev->priv;
90 int i = 10;
91 u32 buf;
92
93 buf = (data << 8) | addr;
94
95 rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->PHY[0], buf | 0x80);
96 while (i--) {
97 rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->PHY[0], buf);
98 if (rtl818x_ioread8(priv, &priv->map->PHY[2]) == (data & 0xFF))
99 return;
100 }
101 }
102
103 static void rtl8180_handle_rx(struct ieee80211_hw *dev)
104 {
105 struct rtl8180_priv *priv = dev->priv;
106 unsigned int count = 32;
107
108 while (count--) {
109 struct rtl8180_rx_desc *entry = &priv->rx_ring[priv->rx_idx];
110 struct sk_buff *skb = priv->rx_buf[priv->rx_idx];
111 u32 flags = le32_to_cpu(entry->flags);
112
113 if (flags & RTL8180_RX_DESC_FLAG_OWN)
114 return;
115
116 if (unlikely(flags & (RTL8180_RX_DESC_FLAG_DMA_FAIL |
117 RTL8180_RX_DESC_FLAG_FOF |
118 RTL8180_RX_DESC_FLAG_RX_ERR)))
119 goto done;
120 else {
121 u32 flags2 = le32_to_cpu(entry->flags2);
122 struct ieee80211_rx_status rx_status = {0};
123 struct sk_buff *new_skb = dev_alloc_skb(MAX_RX_SIZE);
124
125 if (unlikely(!new_skb))
126 goto done;
127
128 pci_unmap_single(priv->pdev,
129 *((dma_addr_t *)skb->cb),
130 MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
131 skb_put(skb, flags & 0xFFF);
132
133 rx_status.antenna = (flags2 >> 15) & 1;
134 /* TODO: improve signal/rssi reporting */
135 rx_status.signal = flags2 & 0xFF;
136 rx_status.ssi = (flags2 >> 8) & 0x7F;
137 /* XXX: is this correct? */
138 rx_status.rate_idx = (flags >> 20) & 0xF;
139 rx_status.freq = dev->conf.channel->center_freq;
140 rx_status.band = dev->conf.channel->band;
141 rx_status.mactime = le64_to_cpu(entry->tsft);
142 rx_status.flag |= RX_FLAG_TSFT;
143 if (flags & RTL8180_RX_DESC_FLAG_CRC32_ERR)
144 rx_status.flag |= RX_FLAG_FAILED_FCS_CRC;
145
146 ieee80211_rx_irqsafe(dev, skb, &rx_status);
147
148 skb = new_skb;
149 priv->rx_buf[priv->rx_idx] = skb;
150 *((dma_addr_t *) skb->cb) =
151 pci_map_single(priv->pdev, skb_tail_pointer(skb),
152 MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
153 }
154
155 done:
156 entry->rx_buf = cpu_to_le32(*((dma_addr_t *)skb->cb));
157 entry->flags = cpu_to_le32(RTL8180_RX_DESC_FLAG_OWN |
158 MAX_RX_SIZE);
159 if (priv->rx_idx == 31)
160 entry->flags |= cpu_to_le32(RTL8180_RX_DESC_FLAG_EOR);
161 priv->rx_idx = (priv->rx_idx + 1) % 32;
162 }
163 }
164
165 static void rtl8180_handle_tx(struct ieee80211_hw *dev, unsigned int prio)
166 {
167 struct rtl8180_priv *priv = dev->priv;
168 struct rtl8180_tx_ring *ring = &priv->tx_ring[prio];
169
170 while (skb_queue_len(&ring->queue)) {
171 struct rtl8180_tx_desc *entry = &ring->desc[ring->idx];
172 struct sk_buff *skb;
173 struct ieee80211_tx_status status;
174 struct ieee80211_tx_control *control;
175 u32 flags = le32_to_cpu(entry->flags);
176
177 if (flags & RTL8180_TX_DESC_FLAG_OWN)
178 return;
179
180 memset(&status, 0, sizeof(status));
181
182 ring->idx = (ring->idx + 1) % ring->entries;
183 skb = __skb_dequeue(&ring->queue);
184 pci_unmap_single(priv->pdev, le32_to_cpu(entry->tx_buf),
185 skb->len, PCI_DMA_TODEVICE);
186
187 control = *((struct ieee80211_tx_control **)skb->cb);
188 if (control)
189 memcpy(&status.control, control, sizeof(*control));
190 kfree(control);
191
192 if (!(status.control.flags & IEEE80211_TXCTL_NO_ACK)) {
193 if (flags & RTL8180_TX_DESC_FLAG_TX_OK)
194 status.flags = IEEE80211_TX_STATUS_ACK;
195 else
196 status.excessive_retries = 1;
197 }
198 status.retry_count = flags & 0xFF;
199
200 ieee80211_tx_status_irqsafe(dev, skb, &status);
201 if (ring->entries - skb_queue_len(&ring->queue) == 2)
202 ieee80211_wake_queue(dev, prio);
203 }
204 }
205
206 static irqreturn_t rtl8180_interrupt(int irq, void *dev_id)
207 {
208 struct ieee80211_hw *dev = dev_id;
209 struct rtl8180_priv *priv = dev->priv;
210 u16 reg;
211
212 spin_lock(&priv->lock);
213 reg = rtl818x_ioread16(priv, &priv->map->INT_STATUS);
214 if (unlikely(reg == 0xFFFF)) {
215 spin_unlock(&priv->lock);
216 return IRQ_HANDLED;
217 }
218
219 rtl818x_iowrite16(priv, &priv->map->INT_STATUS, reg);
220
221 if (reg & (RTL818X_INT_TXB_OK | RTL818X_INT_TXB_ERR))
222 rtl8180_handle_tx(dev, 3);
223
224 if (reg & (RTL818X_INT_TXH_OK | RTL818X_INT_TXH_ERR))
225 rtl8180_handle_tx(dev, 2);
226
227 if (reg & (RTL818X_INT_TXN_OK | RTL818X_INT_TXN_ERR))
228 rtl8180_handle_tx(dev, 1);
229
230 if (reg & (RTL818X_INT_TXL_OK | RTL818X_INT_TXL_ERR))
231 rtl8180_handle_tx(dev, 0);
232
233 if (reg & (RTL818X_INT_RX_OK | RTL818X_INT_RX_ERR))
234 rtl8180_handle_rx(dev);
235
236 spin_unlock(&priv->lock);
237
238 return IRQ_HANDLED;
239 }
240
241 static int rtl8180_tx(struct ieee80211_hw *dev, struct sk_buff *skb,
242 struct ieee80211_tx_control *control)
243 {
244 struct rtl8180_priv *priv = dev->priv;
245 struct rtl8180_tx_ring *ring;
246 struct rtl8180_tx_desc *entry;
247 unsigned long flags;
248 unsigned int idx, prio;
249 dma_addr_t mapping;
250 u32 tx_flags;
251 u16 plcp_len = 0;
252 __le16 rts_duration = 0;
253
254 prio = control->queue;
255 ring = &priv->tx_ring[prio];
256
257 mapping = pci_map_single(priv->pdev, skb->data,
258 skb->len, PCI_DMA_TODEVICE);
259
260 BUG_ON(!control->tx_rate);
261
262 tx_flags = RTL8180_TX_DESC_FLAG_OWN | RTL8180_TX_DESC_FLAG_FS |
263 RTL8180_TX_DESC_FLAG_LS |
264 (control->tx_rate->hw_value << 24) | skb->len;
265
266 if (priv->r8185)
267 tx_flags |= RTL8180_TX_DESC_FLAG_DMA |
268 RTL8180_TX_DESC_FLAG_NO_ENC;
269
270 if (control->flags & IEEE80211_TXCTL_USE_RTS_CTS) {
271 BUG_ON(!control->rts_cts_rate);
272 tx_flags |= RTL8180_TX_DESC_FLAG_RTS;
273 tx_flags |= control->rts_cts_rate->hw_value << 19;
274 } else if (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT) {
275 BUG_ON(!control->rts_cts_rate);
276 tx_flags |= RTL8180_TX_DESC_FLAG_CTS;
277 tx_flags |= control->rts_cts_rate->hw_value << 19;
278 }
279
280 *((struct ieee80211_tx_control **) skb->cb) =
281 kmemdup(control, sizeof(*control), GFP_ATOMIC);
282
283 if (control->flags & IEEE80211_TXCTL_USE_RTS_CTS)
284 rts_duration = ieee80211_rts_duration(dev, priv->vif, skb->len,
285 control);
286
287 if (!priv->r8185) {
288 unsigned int remainder;
289
290 plcp_len = DIV_ROUND_UP(16 * (skb->len + 4),
291 (control->tx_rate->bitrate * 2) / 10);
292 remainder = (16 * (skb->len + 4)) %
293 ((control->tx_rate->bitrate * 2) / 10);
294 if (remainder > 0 && remainder <= 6)
295 plcp_len |= 1 << 15;
296 }
297
298 spin_lock_irqsave(&priv->lock, flags);
299 idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries;
300 entry = &ring->desc[idx];
301
302 entry->rts_duration = rts_duration;
303 entry->plcp_len = cpu_to_le16(plcp_len);
304 entry->tx_buf = cpu_to_le32(mapping);
305 entry->frame_len = cpu_to_le32(skb->len);
306 entry->flags2 = control->alt_retry_rate != NULL ?
307 control->alt_retry_rate->bitrate << 4 : 0;
308 entry->retry_limit = control->retry_limit;
309 entry->flags = cpu_to_le32(tx_flags);
310 __skb_queue_tail(&ring->queue, skb);
311 if (ring->entries - skb_queue_len(&ring->queue) < 2)
312 ieee80211_stop_queue(dev, control->queue);
313 spin_unlock_irqrestore(&priv->lock, flags);
314
315 rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING, (1 << (prio + 4)));
316
317 return 0;
318 }
319
320 void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam)
321 {
322 u8 reg;
323
324 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
325 reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
326 rtl818x_iowrite8(priv, &priv->map->CONFIG3,
327 reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
328 rtl818x_iowrite32(priv, &priv->map->ANAPARAM, anaparam);
329 rtl818x_iowrite8(priv, &priv->map->CONFIG3,
330 reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
331 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
332 }
333
334 static int rtl8180_init_hw(struct ieee80211_hw *dev)
335 {
336 struct rtl8180_priv *priv = dev->priv;
337 u16 reg;
338
339 rtl818x_iowrite8(priv, &priv->map->CMD, 0);
340 rtl818x_ioread8(priv, &priv->map->CMD);
341 msleep(10);
342
343 /* reset */
344 rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
345 rtl818x_ioread8(priv, &priv->map->CMD);
346
347 reg = rtl818x_ioread8(priv, &priv->map->CMD);
348 reg &= (1 << 1);
349 reg |= RTL818X_CMD_RESET;
350 rtl818x_iowrite8(priv, &priv->map->CMD, RTL818X_CMD_RESET);
351 rtl818x_ioread8(priv, &priv->map->CMD);
352 msleep(200);
353
354 /* check success of reset */
355 if (rtl818x_ioread8(priv, &priv->map->CMD) & RTL818X_CMD_RESET) {
356 printk(KERN_ERR "%s: reset timeout!\n", wiphy_name(dev->wiphy));
357 return -ETIMEDOUT;
358 }
359
360 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_LOAD);
361 rtl818x_ioread8(priv, &priv->map->CMD);
362 msleep(200);
363
364 if (rtl818x_ioread8(priv, &priv->map->CONFIG3) & (1 << 3)) {
365 /* For cardbus */
366 reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
367 reg |= 1 << 1;
368 rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
369 reg = rtl818x_ioread16(priv, &priv->map->FEMR);
370 reg |= (1 << 15) | (1 << 14) | (1 << 4);
371 rtl818x_iowrite16(priv, &priv->map->FEMR, reg);
372 }
373
374 rtl818x_iowrite8(priv, &priv->map->MSR, 0);
375
376 if (!priv->r8185)
377 rtl8180_set_anaparam(priv, priv->anaparam);
378
379 rtl818x_iowrite32(priv, &priv->map->RDSAR, priv->rx_ring_dma);
380 rtl818x_iowrite32(priv, &priv->map->TBDA, priv->tx_ring[3].dma);
381 rtl818x_iowrite32(priv, &priv->map->THPDA, priv->tx_ring[2].dma);
382 rtl818x_iowrite32(priv, &priv->map->TNPDA, priv->tx_ring[1].dma);
383 rtl818x_iowrite32(priv, &priv->map->TLPDA, priv->tx_ring[0].dma);
384
385 /* TODO: necessary? specs indicate not */
386 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
387 reg = rtl818x_ioread8(priv, &priv->map->CONFIG2);
388 rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg & ~(1 << 3));
389 if (priv->r8185) {
390 reg = rtl818x_ioread8(priv, &priv->map->CONFIG2);
391 rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg | (1 << 4));
392 }
393 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
394
395 /* TODO: set CONFIG5 for calibrating AGC on rtl8180 + philips radio? */
396
397 /* TODO: turn off hw wep on rtl8180 */
398
399 rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0);
400
401 if (priv->r8185) {
402 rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0);
403 rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0x81);
404 rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (8 << 4) | 0);
405
406 rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
407
408 /* TODO: set ClkRun enable? necessary? */
409 reg = rtl818x_ioread8(priv, &priv->map->GP_ENABLE);
410 rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, reg & ~(1 << 6));
411 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
412 reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
413 rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | (1 << 2));
414 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
415 } else {
416 rtl818x_iowrite16(priv, &priv->map->BRSR, 0x1);
417 rtl818x_iowrite8(priv, &priv->map->SECURITY, 0);
418
419 rtl818x_iowrite8(priv, &priv->map->PHY_DELAY, 0x6);
420 rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER, 0x4C);
421 }
422
423 priv->rf->init(dev);
424 if (priv->r8185)
425 rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
426 return 0;
427 }
428
429 static int rtl8180_init_rx_ring(struct ieee80211_hw *dev)
430 {
431 struct rtl8180_priv *priv = dev->priv;
432 struct rtl8180_rx_desc *entry;
433 int i;
434
435 priv->rx_ring = pci_alloc_consistent(priv->pdev,
436 sizeof(*priv->rx_ring) * 32,
437 &priv->rx_ring_dma);
438
439 if (!priv->rx_ring || (unsigned long)priv->rx_ring & 0xFF) {
440 printk(KERN_ERR "%s: Cannot allocate RX ring\n",
441 wiphy_name(dev->wiphy));
442 return -ENOMEM;
443 }
444
445 memset(priv->rx_ring, 0, sizeof(*priv->rx_ring) * 32);
446 priv->rx_idx = 0;
447
448 for (i = 0; i < 32; i++) {
449 struct sk_buff *skb = dev_alloc_skb(MAX_RX_SIZE);
450 dma_addr_t *mapping;
451 entry = &priv->rx_ring[i];
452 if (!skb)
453 return 0;
454
455 priv->rx_buf[i] = skb;
456 mapping = (dma_addr_t *)skb->cb;
457 *mapping = pci_map_single(priv->pdev, skb_tail_pointer(skb),
458 MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
459 entry->rx_buf = cpu_to_le32(*mapping);
460 entry->flags = cpu_to_le32(RTL8180_RX_DESC_FLAG_OWN |
461 MAX_RX_SIZE);
462 }
463 entry->flags |= cpu_to_le32(RTL8180_RX_DESC_FLAG_EOR);
464 return 0;
465 }
466
467 static void rtl8180_free_rx_ring(struct ieee80211_hw *dev)
468 {
469 struct rtl8180_priv *priv = dev->priv;
470 int i;
471
472 for (i = 0; i < 32; i++) {
473 struct sk_buff *skb = priv->rx_buf[i];
474 if (!skb)
475 continue;
476
477 pci_unmap_single(priv->pdev,
478 *((dma_addr_t *)skb->cb),
479 MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
480 kfree_skb(skb);
481 }
482
483 pci_free_consistent(priv->pdev, sizeof(*priv->rx_ring) * 32,
484 priv->rx_ring, priv->rx_ring_dma);
485 priv->rx_ring = NULL;
486 }
487
488 static int rtl8180_init_tx_ring(struct ieee80211_hw *dev,
489 unsigned int prio, unsigned int entries)
490 {
491 struct rtl8180_priv *priv = dev->priv;
492 struct rtl8180_tx_desc *ring;
493 dma_addr_t dma;
494 int i;
495
496 ring = pci_alloc_consistent(priv->pdev, sizeof(*ring) * entries, &dma);
497 if (!ring || (unsigned long)ring & 0xFF) {
498 printk(KERN_ERR "%s: Cannot allocate TX ring (prio = %d)\n",
499 wiphy_name(dev->wiphy), prio);
500 return -ENOMEM;
501 }
502
503 memset(ring, 0, sizeof(*ring)*entries);
504 priv->tx_ring[prio].desc = ring;
505 priv->tx_ring[prio].dma = dma;
506 priv->tx_ring[prio].idx = 0;
507 priv->tx_ring[prio].entries = entries;
508 skb_queue_head_init(&priv->tx_ring[prio].queue);
509
510 for (i = 0; i < entries; i++)
511 ring[i].next_tx_desc =
512 cpu_to_le32((u32)dma + ((i + 1) % entries) * sizeof(*ring));
513
514 return 0;
515 }
516
517 static void rtl8180_free_tx_ring(struct ieee80211_hw *dev, unsigned int prio)
518 {
519 struct rtl8180_priv *priv = dev->priv;
520 struct rtl8180_tx_ring *ring = &priv->tx_ring[prio];
521
522 while (skb_queue_len(&ring->queue)) {
523 struct rtl8180_tx_desc *entry = &ring->desc[ring->idx];
524 struct sk_buff *skb = __skb_dequeue(&ring->queue);
525
526 pci_unmap_single(priv->pdev, le32_to_cpu(entry->tx_buf),
527 skb->len, PCI_DMA_TODEVICE);
528 kfree(*((struct ieee80211_tx_control **) skb->cb));
529 kfree_skb(skb);
530 ring->idx = (ring->idx + 1) % ring->entries;
531 }
532
533 pci_free_consistent(priv->pdev, sizeof(*ring->desc)*ring->entries,
534 ring->desc, ring->dma);
535 ring->desc = NULL;
536 }
537
538 static int rtl8180_start(struct ieee80211_hw *dev)
539 {
540 struct rtl8180_priv *priv = dev->priv;
541 int ret, i;
542 u32 reg;
543
544 ret = rtl8180_init_rx_ring(dev);
545 if (ret)
546 return ret;
547
548 for (i = 0; i < 4; i++)
549 if ((ret = rtl8180_init_tx_ring(dev, i, 16)))
550 goto err_free_rings;
551
552 ret = rtl8180_init_hw(dev);
553 if (ret)
554 goto err_free_rings;
555
556 rtl818x_iowrite32(priv, &priv->map->RDSAR, priv->rx_ring_dma);
557 rtl818x_iowrite32(priv, &priv->map->TBDA, priv->tx_ring[3].dma);
558 rtl818x_iowrite32(priv, &priv->map->THPDA, priv->tx_ring[2].dma);
559 rtl818x_iowrite32(priv, &priv->map->TNPDA, priv->tx_ring[1].dma);
560 rtl818x_iowrite32(priv, &priv->map->TLPDA, priv->tx_ring[0].dma);
561
562 ret = request_irq(priv->pdev->irq, &rtl8180_interrupt,
563 IRQF_SHARED, KBUILD_MODNAME, dev);
564 if (ret) {
565 printk(KERN_ERR "%s: failed to register IRQ handler\n",
566 wiphy_name(dev->wiphy));
567 goto err_free_rings;
568 }
569
570 rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
571
572 rtl818x_iowrite32(priv, &priv->map->MAR[0], ~0);
573 rtl818x_iowrite32(priv, &priv->map->MAR[1], ~0);
574
575 reg = RTL818X_RX_CONF_ONLYERLPKT |
576 RTL818X_RX_CONF_RX_AUTORESETPHY |
577 RTL818X_RX_CONF_MGMT |
578 RTL818X_RX_CONF_DATA |
579 (7 << 8 /* MAX RX DMA */) |
580 RTL818X_RX_CONF_BROADCAST |
581 RTL818X_RX_CONF_NICMAC;
582
583 if (priv->r8185)
584 reg |= RTL818X_RX_CONF_CSDM1 | RTL818X_RX_CONF_CSDM2;
585 else {
586 reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE1)
587 ? RTL818X_RX_CONF_CSDM1 : 0;
588 reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE2)
589 ? RTL818X_RX_CONF_CSDM2 : 0;
590 }
591
592 priv->rx_conf = reg;
593 rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
594
595 if (priv->r8185) {
596 reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
597 reg &= ~RTL818X_CW_CONF_PERPACKET_CW_SHIFT;
598 reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT;
599 rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
600
601 reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
602 reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT;
603 reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT;
604 reg |= RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
605 rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
606
607 /* disable early TX */
608 rtl818x_iowrite8(priv, (u8 __iomem *)priv->map + 0xec, 0x3f);
609 }
610
611 reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
612 reg |= (6 << 21 /* MAX TX DMA */) |
613 RTL818X_TX_CONF_NO_ICV;
614
615 if (priv->r8185)
616 reg &= ~RTL818X_TX_CONF_PROBE_DTS;
617 else
618 reg &= ~RTL818X_TX_CONF_HW_SEQNUM;
619
620 /* different meaning, same value on both rtl8185 and rtl8180 */
621 reg &= ~RTL818X_TX_CONF_SAT_HWPLCP;
622
623 rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
624
625 reg = rtl818x_ioread8(priv, &priv->map->CMD);
626 reg |= RTL818X_CMD_RX_ENABLE;
627 reg |= RTL818X_CMD_TX_ENABLE;
628 rtl818x_iowrite8(priv, &priv->map->CMD, reg);
629
630 priv->mode = IEEE80211_IF_TYPE_MNTR;
631 return 0;
632
633 err_free_rings:
634 rtl8180_free_rx_ring(dev);
635 for (i = 0; i < 4; i++)
636 if (priv->tx_ring[i].desc)
637 rtl8180_free_tx_ring(dev, i);
638
639 return ret;
640 }
641
642 static void rtl8180_stop(struct ieee80211_hw *dev)
643 {
644 struct rtl8180_priv *priv = dev->priv;
645 u8 reg;
646 int i;
647
648 priv->mode = IEEE80211_IF_TYPE_INVALID;
649
650 rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
651
652 reg = rtl818x_ioread8(priv, &priv->map->CMD);
653 reg &= ~RTL818X_CMD_TX_ENABLE;
654 reg &= ~RTL818X_CMD_RX_ENABLE;
655 rtl818x_iowrite8(priv, &priv->map->CMD, reg);
656
657 priv->rf->stop(dev);
658
659 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
660 reg = rtl818x_ioread8(priv, &priv->map->CONFIG4);
661 rtl818x_iowrite8(priv, &priv->map->CONFIG4, reg | RTL818X_CONFIG4_VCOOFF);
662 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
663
664 free_irq(priv->pdev->irq, dev);
665
666 rtl8180_free_rx_ring(dev);
667 for (i = 0; i < 4; i++)
668 rtl8180_free_tx_ring(dev, i);
669 }
670
671 static int rtl8180_add_interface(struct ieee80211_hw *dev,
672 struct ieee80211_if_init_conf *conf)
673 {
674 struct rtl8180_priv *priv = dev->priv;
675
676 if (priv->mode != IEEE80211_IF_TYPE_MNTR)
677 return -EOPNOTSUPP;
678
679 switch (conf->type) {
680 case IEEE80211_IF_TYPE_STA:
681 priv->mode = conf->type;
682 break;
683 default:
684 return -EOPNOTSUPP;
685 }
686
687 priv->vif = conf->vif;
688
689 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
690 rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->MAC[0],
691 le32_to_cpu(*(__le32 *)conf->mac_addr));
692 rtl818x_iowrite16(priv, (__le16 __iomem *)&priv->map->MAC[4],
693 le16_to_cpu(*(__le16 *)(conf->mac_addr + 4)));
694 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
695
696 return 0;
697 }
698
699 static void rtl8180_remove_interface(struct ieee80211_hw *dev,
700 struct ieee80211_if_init_conf *conf)
701 {
702 struct rtl8180_priv *priv = dev->priv;
703 priv->mode = IEEE80211_IF_TYPE_MNTR;
704 priv->vif = NULL;
705 }
706
707 static int rtl8180_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
708 {
709 struct rtl8180_priv *priv = dev->priv;
710
711 priv->rf->set_chan(dev, conf);
712
713 return 0;
714 }
715
716 static int rtl8180_config_interface(struct ieee80211_hw *dev,
717 struct ieee80211_vif *vif,
718 struct ieee80211_if_conf *conf)
719 {
720 struct rtl8180_priv *priv = dev->priv;
721 int i;
722
723 for (i = 0; i < ETH_ALEN; i++)
724 rtl818x_iowrite8(priv, &priv->map->BSSID[i], conf->bssid[i]);
725
726 if (is_valid_ether_addr(conf->bssid))
727 rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_INFRA);
728 else
729 rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_NO_LINK);
730
731 return 0;
732 }
733
734 static void rtl8180_configure_filter(struct ieee80211_hw *dev,
735 unsigned int changed_flags,
736 unsigned int *total_flags,
737 int mc_count, struct dev_addr_list *mclist)
738 {
739 struct rtl8180_priv *priv = dev->priv;
740
741 if (changed_flags & FIF_FCSFAIL)
742 priv->rx_conf ^= RTL818X_RX_CONF_FCS;
743 if (changed_flags & FIF_CONTROL)
744 priv->rx_conf ^= RTL818X_RX_CONF_CTRL;
745 if (changed_flags & FIF_OTHER_BSS)
746 priv->rx_conf ^= RTL818X_RX_CONF_MONITOR;
747 if (*total_flags & FIF_ALLMULTI || mc_count > 0)
748 priv->rx_conf |= RTL818X_RX_CONF_MULTICAST;
749 else
750 priv->rx_conf &= ~RTL818X_RX_CONF_MULTICAST;
751
752 *total_flags = 0;
753
754 if (priv->rx_conf & RTL818X_RX_CONF_FCS)
755 *total_flags |= FIF_FCSFAIL;
756 if (priv->rx_conf & RTL818X_RX_CONF_CTRL)
757 *total_flags |= FIF_CONTROL;
758 if (priv->rx_conf & RTL818X_RX_CONF_MONITOR)
759 *total_flags |= FIF_OTHER_BSS;
760 if (priv->rx_conf & RTL818X_RX_CONF_MULTICAST)
761 *total_flags |= FIF_ALLMULTI;
762
763 rtl818x_iowrite32(priv, &priv->map->RX_CONF, priv->rx_conf);
764 }
765
766 static const struct ieee80211_ops rtl8180_ops = {
767 .tx = rtl8180_tx,
768 .start = rtl8180_start,
769 .stop = rtl8180_stop,
770 .add_interface = rtl8180_add_interface,
771 .remove_interface = rtl8180_remove_interface,
772 .config = rtl8180_config,
773 .config_interface = rtl8180_config_interface,
774 .configure_filter = rtl8180_configure_filter,
775 };
776
777 static void rtl8180_eeprom_register_read(struct eeprom_93cx6 *eeprom)
778 {
779 struct ieee80211_hw *dev = eeprom->data;
780 struct rtl8180_priv *priv = dev->priv;
781 u8 reg = rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
782
783 eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE;
784 eeprom->reg_data_out = reg & RTL818X_EEPROM_CMD_READ;
785 eeprom->reg_data_clock = reg & RTL818X_EEPROM_CMD_CK;
786 eeprom->reg_chip_select = reg & RTL818X_EEPROM_CMD_CS;
787 }
788
789 static void rtl8180_eeprom_register_write(struct eeprom_93cx6 *eeprom)
790 {
791 struct ieee80211_hw *dev = eeprom->data;
792 struct rtl8180_priv *priv = dev->priv;
793 u8 reg = 2 << 6;
794
795 if (eeprom->reg_data_in)
796 reg |= RTL818X_EEPROM_CMD_WRITE;
797 if (eeprom->reg_data_out)
798 reg |= RTL818X_EEPROM_CMD_READ;
799 if (eeprom->reg_data_clock)
800 reg |= RTL818X_EEPROM_CMD_CK;
801 if (eeprom->reg_chip_select)
802 reg |= RTL818X_EEPROM_CMD_CS;
803
804 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, reg);
805 rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
806 udelay(10);
807 }
808
809 static int __devinit rtl8180_probe(struct pci_dev *pdev,
810 const struct pci_device_id *id)
811 {
812 struct ieee80211_hw *dev;
813 struct rtl8180_priv *priv;
814 unsigned long mem_addr, mem_len;
815 unsigned int io_addr, io_len;
816 int err, i;
817 struct eeprom_93cx6 eeprom;
818 const char *chip_name, *rf_name = NULL;
819 u32 reg;
820 u16 eeprom_val;
821 DECLARE_MAC_BUF(mac);
822
823 err = pci_enable_device(pdev);
824 if (err) {
825 printk(KERN_ERR "%s (rtl8180): Cannot enable new PCI device\n",
826 pci_name(pdev));
827 return err;
828 }
829
830 err = pci_request_regions(pdev, KBUILD_MODNAME);
831 if (err) {
832 printk(KERN_ERR "%s (rtl8180): Cannot obtain PCI resources\n",
833 pci_name(pdev));
834 return err;
835 }
836
837 io_addr = pci_resource_start(pdev, 0);
838 io_len = pci_resource_len(pdev, 0);
839 mem_addr = pci_resource_start(pdev, 1);
840 mem_len = pci_resource_len(pdev, 1);
841
842 if (mem_len < sizeof(struct rtl818x_csr) ||
843 io_len < sizeof(struct rtl818x_csr)) {
844 printk(KERN_ERR "%s (rtl8180): Too short PCI resources\n",
845 pci_name(pdev));
846 err = -ENOMEM;
847 goto err_free_reg;
848 }
849
850 if ((err = pci_set_dma_mask(pdev, 0xFFFFFF00ULL)) ||
851 (err = pci_set_consistent_dma_mask(pdev, 0xFFFFFF00ULL))) {
852 printk(KERN_ERR "%s (rtl8180): No suitable DMA available\n",
853 pci_name(pdev));
854 goto err_free_reg;
855 }
856
857 pci_set_master(pdev);
858
859 dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8180_ops);
860 if (!dev) {
861 printk(KERN_ERR "%s (rtl8180): ieee80211 alloc failed\n",
862 pci_name(pdev));
863 err = -ENOMEM;
864 goto err_free_reg;
865 }
866
867 priv = dev->priv;
868 priv->pdev = pdev;
869
870 SET_IEEE80211_DEV(dev, &pdev->dev);
871 pci_set_drvdata(pdev, dev);
872
873 priv->map = pci_iomap(pdev, 1, mem_len);
874 if (!priv->map)
875 priv->map = pci_iomap(pdev, 0, io_len);
876
877 if (!priv->map) {
878 printk(KERN_ERR "%s (rtl8180): Cannot map device memory\n",
879 pci_name(pdev));
880 goto err_free_dev;
881 }
882
883 BUILD_BUG_ON(sizeof(priv->channels) != sizeof(rtl818x_channels));
884 BUILD_BUG_ON(sizeof(priv->rates) != sizeof(rtl818x_rates));
885
886 memcpy(priv->channels, rtl818x_channels, sizeof(rtl818x_channels));
887 memcpy(priv->rates, rtl818x_rates, sizeof(rtl818x_rates));
888
889 priv->band.band = IEEE80211_BAND_2GHZ;
890 priv->band.channels = priv->channels;
891 priv->band.n_channels = ARRAY_SIZE(rtl818x_channels);
892 priv->band.bitrates = priv->rates;
893 priv->band.n_bitrates = 4;
894 dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band;
895
896 dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
897 IEEE80211_HW_RX_INCLUDES_FCS;
898 dev->queues = 1;
899 dev->max_rssi = 65;
900
901 reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
902 reg &= RTL818X_TX_CONF_HWVER_MASK;
903 switch (reg) {
904 case RTL818X_TX_CONF_R8180_ABCD:
905 chip_name = "RTL8180";
906 break;
907 case RTL818X_TX_CONF_R8180_F:
908 chip_name = "RTL8180vF";
909 break;
910 case RTL818X_TX_CONF_R8185_ABC:
911 chip_name = "RTL8185";
912 break;
913 case RTL818X_TX_CONF_R8185_D:
914 chip_name = "RTL8185vD";
915 break;
916 default:
917 printk(KERN_ERR "%s (rtl8180): Unknown chip! (0x%x)\n",
918 pci_name(pdev), reg >> 25);
919 goto err_iounmap;
920 }
921
922 priv->r8185 = reg & RTL818X_TX_CONF_R8185_ABC;
923 if (priv->r8185) {
924 priv->band.n_bitrates = ARRAY_SIZE(rtl818x_rates);
925 pci_try_set_mwi(pdev);
926 }
927
928 eeprom.data = dev;
929 eeprom.register_read = rtl8180_eeprom_register_read;
930 eeprom.register_write = rtl8180_eeprom_register_write;
931 if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6))
932 eeprom.width = PCI_EEPROM_WIDTH_93C66;
933 else
934 eeprom.width = PCI_EEPROM_WIDTH_93C46;
935
936 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_PROGRAM);
937 rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
938 udelay(10);
939
940 eeprom_93cx6_read(&eeprom, 0x06, &eeprom_val);
941 eeprom_val &= 0xFF;
942 switch (eeprom_val) {
943 case 1: rf_name = "Intersil";
944 break;
945 case 2: rf_name = "RFMD";
946 break;
947 case 3: priv->rf = &sa2400_rf_ops;
948 break;
949 case 4: priv->rf = &max2820_rf_ops;
950 break;
951 case 5: priv->rf = &grf5101_rf_ops;
952 break;
953 case 9: priv->rf = rtl8180_detect_rf(dev);
954 break;
955 case 10:
956 rf_name = "RTL8255";
957 break;
958 default:
959 printk(KERN_ERR "%s (rtl8180): Unknown RF! (0x%x)\n",
960 pci_name(pdev), eeprom_val);
961 goto err_iounmap;
962 }
963
964 if (!priv->rf) {
965 printk(KERN_ERR "%s (rtl8180): %s RF frontend not supported!\n",
966 pci_name(pdev), rf_name);
967 goto err_iounmap;
968 }
969
970 eeprom_93cx6_read(&eeprom, 0x17, &eeprom_val);
971 priv->csthreshold = eeprom_val >> 8;
972 if (!priv->r8185) {
973 __le32 anaparam;
974 eeprom_93cx6_multiread(&eeprom, 0xD, (__le16 *)&anaparam, 2);
975 priv->anaparam = le32_to_cpu(anaparam);
976 eeprom_93cx6_read(&eeprom, 0x19, &priv->rfparam);
977 }
978
979 eeprom_93cx6_multiread(&eeprom, 0x7, (__le16 *)dev->wiphy->perm_addr, 3);
980 if (!is_valid_ether_addr(dev->wiphy->perm_addr)) {
981 printk(KERN_WARNING "%s (rtl8180): Invalid hwaddr! Using"
982 " randomly generated MAC addr\n", pci_name(pdev));
983 random_ether_addr(dev->wiphy->perm_addr);
984 }
985
986 /* CCK TX power */
987 for (i = 0; i < 14; i += 2) {
988 u16 txpwr;
989 eeprom_93cx6_read(&eeprom, 0x10 + (i >> 1), &txpwr);
990 priv->channels[i].hw_value = txpwr & 0xFF;
991 priv->channels[i + 1].hw_value = txpwr >> 8;
992 }
993
994 /* OFDM TX power */
995 if (priv->r8185) {
996 for (i = 0; i < 14; i += 2) {
997 u16 txpwr;
998 eeprom_93cx6_read(&eeprom, 0x20 + (i >> 1), &txpwr);
999 priv->channels[i].hw_value |= (txpwr & 0xFF) << 8;
1000 priv->channels[i + 1].hw_value |= txpwr & 0xFF00;
1001 }
1002 }
1003
1004 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
1005
1006 spin_lock_init(&priv->lock);
1007
1008 err = ieee80211_register_hw(dev);
1009 if (err) {
1010 printk(KERN_ERR "%s (rtl8180): Cannot register device\n",
1011 pci_name(pdev));
1012 goto err_iounmap;
1013 }
1014
1015 printk(KERN_INFO "%s: hwaddr %s, %s + %s\n",
1016 wiphy_name(dev->wiphy), print_mac(mac, dev->wiphy->perm_addr),
1017 chip_name, priv->rf->name);
1018
1019 return 0;
1020
1021 err_iounmap:
1022 iounmap(priv->map);
1023
1024 err_free_dev:
1025 pci_set_drvdata(pdev, NULL);
1026 ieee80211_free_hw(dev);
1027
1028 err_free_reg:
1029 pci_release_regions(pdev);
1030 pci_disable_device(pdev);
1031 return err;
1032 }
1033
1034 static void __devexit rtl8180_remove(struct pci_dev *pdev)
1035 {
1036 struct ieee80211_hw *dev = pci_get_drvdata(pdev);
1037 struct rtl8180_priv *priv;
1038
1039 if (!dev)
1040 return;
1041
1042 ieee80211_unregister_hw(dev);
1043
1044 priv = dev->priv;
1045
1046 pci_iounmap(pdev, priv->map);
1047 pci_release_regions(pdev);
1048 pci_disable_device(pdev);
1049 ieee80211_free_hw(dev);
1050 }
1051
1052 #ifdef CONFIG_PM
1053 static int rtl8180_suspend(struct pci_dev *pdev, pm_message_t state)
1054 {
1055 pci_save_state(pdev);
1056 pci_set_power_state(pdev, pci_choose_state(pdev, state));
1057 return 0;
1058 }
1059
1060 static int rtl8180_resume(struct pci_dev *pdev)
1061 {
1062 pci_set_power_state(pdev, PCI_D0);
1063 pci_restore_state(pdev);
1064 return 0;
1065 }
1066
1067 #endif /* CONFIG_PM */
1068
1069 static struct pci_driver rtl8180_driver = {
1070 .name = KBUILD_MODNAME,
1071 .id_table = rtl8180_table,
1072 .probe = rtl8180_probe,
1073 .remove = __devexit_p(rtl8180_remove),
1074 #ifdef CONFIG_PM
1075 .suspend = rtl8180_suspend,
1076 .resume = rtl8180_resume,
1077 #endif /* CONFIG_PM */
1078 };
1079
1080 static int __init rtl8180_init(void)
1081 {
1082 return pci_register_driver(&rtl8180_driver);
1083 }
1084
1085 static void __exit rtl8180_exit(void)
1086 {
1087 pci_unregister_driver(&rtl8180_driver);
1088 }
1089
1090 module_init(rtl8180_init);
1091 module_exit(rtl8180_exit);
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree