?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
OMAP2+: sdrc: fix compile break on OMAP4-only config on current omap-for-linus
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / input / touchscreen / h3600_ts_input.c
blobb4d7f63deff106a6d08c0507c7e3febe0662e783
1 /*
2 * Copyright (c) 2001 "Crazy" James Simmons jsimmons@transvirtual.com
3 *
4 * Sponsored by Transvirtual Technology.
5 *
6 * Derived from the code in h3600_ts.[ch] by Charles Flynn
7 */
8
9 /*
10 * Driver for the h3600 Touch Screen and other Atmel controlled devices.
11 */
12
13 /*
14 * This program is free software; you can redistribute it and/or modify
15 * it under the terms of the GNU General Public License as published by
16 * the Free Software Foundation; either version 2 of the License, or
17 * (at your option) any later version.
18 *
19 * This program is distributed in the hope that it will be useful,
20 * but WITHOUT ANY WARRANTY; without even the implied warranty of
21 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
22 * GNU General Public License for more details.
23 *
24 * You should have received a copy of the GNU General Public License
25 * along with this program; if not, write to the Free Software
26 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
27 *
28 * Should you need to contact me, the author, you can do so by
29 * e-mail - mail your message to <jsimmons@transvirtual.com>.
30 */
31
32 #include <linux/errno.h>
33 #include <linux/kernel.h>
34 #include <linux/module.h>
35 #include <linux/slab.h>
36 #include <linux/input.h>
37 #include <linux/serio.h>
38 #include <linux/init.h>
39 #include <linux/delay.h>
40
41 /* SA1100 serial defines */
42 #include <mach/hardware.h>
43 #include <mach/irqs.h>
44
45 #define DRIVER_DESC "H3600 touchscreen driver"
46
47 MODULE_AUTHOR("James Simmons <jsimmons@transvirtual.com>");
48 MODULE_DESCRIPTION(DRIVER_DESC);
49 MODULE_LICENSE("GPL");
50
51 /*
52 * Definitions & global arrays.
53 */
54
55 /* The start and end of frame characters SOF and EOF */
56 #define CHAR_SOF 0x02
57 #define CHAR_EOF 0x03
58 #define FRAME_OVERHEAD 3 /* CHAR_SOF,CHAR_EOF,LENGTH = 3 */
59
60 /*
61 Atmel events and response IDs contained in frame.
62 Programmer has no control over these numbers.
63 TODO there are holes - specifically 1,7,0x0a
64 */
65 #define VERSION_ID 0 /* Get Version (request/respose) */
66 #define KEYBD_ID 2 /* Keyboard (event) */
67 #define TOUCHS_ID 3 /* Touch Screen (event)*/
68 #define EEPROM_READ_ID 4 /* (request/response) */
69 #define EEPROM_WRITE_ID 5 /* (request/response) */
70 #define THERMAL_ID 6 /* (request/response) */
71 #define NOTIFY_LED_ID 8 /* (request/response) */
72 #define BATTERY_ID 9 /* (request/response) */
73 #define SPI_READ_ID 0x0b /* ( request/response) */
74 #define SPI_WRITE_ID 0x0c /* ( request/response) */
75 #define FLITE_ID 0x0d /* backlight ( request/response) */
76 #define STX_ID 0xa1 /* extension pack status (req/resp) */
77
78 #define MAX_ID 14
79
80 #define H3600_MAX_LENGTH 16
81 #define H3600_KEY 0xf
82
83 #define H3600_SCANCODE_RECORD 1 /* 1 -> record button */
84 #define H3600_SCANCODE_CALENDAR 2 /* 2 -> calendar */
85 #define H3600_SCANCODE_CONTACTS 3 /* 3 -> contact */
86 #define H3600_SCANCODE_Q 4 /* 4 -> Q button */
87 #define H3600_SCANCODE_START 5 /* 5 -> start menu */
88 #define H3600_SCANCODE_UP 6 /* 6 -> up */
89 #define H3600_SCANCODE_RIGHT 7 /* 7 -> right */
90 #define H3600_SCANCODE_LEFT 8 /* 8 -> left */
91 #define H3600_SCANCODE_DOWN 9 /* 9 -> down */
92
93 /*
94 * Per-touchscreen data.
95 */
96 struct h3600_dev {
97 struct input_dev *dev;
98 struct serio *serio;
99 unsigned char event; /* event ID from packet */
100 unsigned char chksum;
101 unsigned char len;
102 unsigned char idx;
103 unsigned char buf[H3600_MAX_LENGTH];
104 char phys[32];
105 };
106
107 static irqreturn_t action_button_handler(int irq, void *dev_id)
108 {
109 int down = (GPLR & GPIO_BITSY_ACTION_BUTTON) ? 0 : 1;
110 struct input_dev *dev = dev_id;
111
112 input_report_key(dev, KEY_ENTER, down);
113 input_sync(dev);
114
115 return IRQ_HANDLED;
116 }
117
118 static irqreturn_t npower_button_handler(int irq, void *dev_id)
119 {
120 int down = (GPLR & GPIO_BITSY_NPOWER_BUTTON) ? 0 : 1;
121 struct input_dev *dev = dev_id;
122
123 /*
124 * This interrupt is only called when we release the key. So we have
125 * to fake a key press.
126 */
127 input_report_key(dev, KEY_SUSPEND, 1);
128 input_report_key(dev, KEY_SUSPEND, down);
129 input_sync(dev);
130
131 return IRQ_HANDLED;
132 }
133
134 #ifdef CONFIG_PM
135
136 static int flite_brightness = 25;
137
138 enum flite_pwr {
139 FLITE_PWR_OFF = 0,
140 FLITE_PWR_ON = 1
141 };
142
143 /*
144 * h3600_flite_power: enables or disables power to frontlight, using last bright */
145 unsigned int h3600_flite_power(struct input_dev *dev, enum flite_pwr pwr)
146 {
147 unsigned char brightness = (pwr == FLITE_PWR_OFF) ? 0 : flite_brightness;
148 struct h3600_dev *ts = input_get_drvdata(dev);
149
150 /* Must be in this order */
151 serio_write(ts->serio, 1);
152 serio_write(ts->serio, pwr);
153 serio_write(ts->serio, brightness);
154
155 return 0;
156 }
157
158 #endif
159
160 /*
161 * This function translates the native event packets to linux input event
162 * packets. Some packets coming from serial are not touchscreen related. In
163 * this case we send them off to be processed elsewhere.
164 */
165 static void h3600ts_process_packet(struct h3600_dev *ts)
166 {
167 struct input_dev *dev = ts->dev;
168 static int touched = 0;
169 int key, down = 0;
170
171 switch (ts->event) {
172 /*
173 Buttons - returned as a single byte
174 7 6 5 4 3 2 1 0
175 S x x x N N N N
176
177 S switch state ( 0=pressed 1=released)
178 x Unused.
179 NNNN switch number 0-15
180
181 Note: This is true for non interrupt generated key events.
182 */
183 case KEYBD_ID:
184 down = (ts->buf[0] & 0x80) ? 0 : 1;
185
186 switch (ts->buf[0] & 0x7f) {
187 case H3600_SCANCODE_RECORD:
188 key = KEY_RECORD;
189 break;
190 case H3600_SCANCODE_CALENDAR:
191 key = KEY_PROG1;
192 break;
193 case H3600_SCANCODE_CONTACTS:
194 key = KEY_PROG2;
195 break;
196 case H3600_SCANCODE_Q:
197 key = KEY_Q;
198 break;
199 case H3600_SCANCODE_START:
200 key = KEY_PROG3;
201 break;
202 case H3600_SCANCODE_UP:
203 key = KEY_UP;
204 break;
205 case H3600_SCANCODE_RIGHT:
206 key = KEY_RIGHT;
207 break;
208 case H3600_SCANCODE_LEFT:
209 key = KEY_LEFT;
210 break;
211 case H3600_SCANCODE_DOWN:
212 key = KEY_DOWN;
213 break;
214 default:
215 key = 0;
216 }
217 if (key)
218 input_report_key(dev, key, down);
219 break;
220 /*
221 * Native touchscreen event data is formatted as shown below:-
222 *
223 * +-------+-------+-------+-------+
224 * | Xmsb | Xlsb | Ymsb | Ylsb |
225 * +-------+-------+-------+-------+
226 * byte 0 1 2 3
227 */
228 case TOUCHS_ID:
229 if (!touched) {
230 input_report_key(dev, BTN_TOUCH, 1);
231 touched = 1;
232 }
233
234 if (ts->len) {
235 unsigned short x, y;
236
237 x = ts->buf[0]; x <<= 8; x += ts->buf[1];
238 y = ts->buf[2]; y <<= 8; y += ts->buf[3];
239
240 input_report_abs(dev, ABS_X, x);
241 input_report_abs(dev, ABS_Y, y);
242 } else {
243 input_report_key(dev, BTN_TOUCH, 0);
244 touched = 0;
245 }
246 break;
247 default:
248 /* Send a non input event elsewhere */
249 break;
250 }
251
252 input_sync(dev);
253 }
254
255 /*
256 * h3600ts_event() handles events from the input module.
257 */
258 static int h3600ts_event(struct input_dev *dev, unsigned int type,
259 unsigned int code, int value)
260 {
261 #if 0
262 struct h3600_dev *ts = input_get_drvdata(dev);
263
264 switch (type) {
265 case EV_LED: {
266 // serio_write(ts->serio, SOME_CMD);
267 return 0;
268 }
269 }
270 return -1;
271 #endif
272 return 0;
273 }
274
275 /*
276 Frame format
277 byte 1 2 3 len + 4
278 +-------+---------------+---------------+--=------------+
279 |SOF |id |len | len bytes | Chksum |
280 +-------+---------------+---------------+--=------------+
281 bit 0 7 8 11 12 15 16
282
283 +-------+---------------+-------+
284 |SOF |id |0 |Chksum | - Note Chksum does not include SOF
285 +-------+---------------+-------+
286 bit 0 7 8 11 12 15 16
287
288 */
289
290 static int state;
291
292 /* decode States */
293 #define STATE_SOF 0 /* start of FRAME */
294 #define STATE_ID 1 /* state where we decode the ID & len */
295 #define STATE_DATA 2 /* state where we decode data */
296 #define STATE_EOF 3 /* state where we decode checksum or EOF */
297
298 static irqreturn_t h3600ts_interrupt(struct serio *serio, unsigned char data,
299 unsigned int flags)
300 {
301 struct h3600_dev *ts = serio_get_drvdata(serio);
302
303 /*
304 * We have a new frame coming in.
305 */
306 switch (state) {
307 case STATE_SOF:
308 if (data == CHAR_SOF)
309 state = STATE_ID;
310 break;
311 case STATE_ID:
312 ts->event = (data & 0xf0) >> 4;
313 ts->len = (data & 0xf);
314 ts->idx = 0;
315 if (ts->event >= MAX_ID) {
316 state = STATE_SOF;
317 break;
318 }
319 ts->chksum = data;
320 state = (ts->len > 0) ? STATE_DATA : STATE_EOF;
321 break;
322 case STATE_DATA:
323 ts->chksum += data;
324 ts->buf[ts->idx]= data;
325 if (++ts->idx == ts->len)
326 state = STATE_EOF;
327 break;
328 case STATE_EOF:
329 state = STATE_SOF;
330 if (data == CHAR_EOF || data == ts->chksum)
331 h3600ts_process_packet(ts);
332 break;
333 default:
334 printk("Error3\n");
335 break;
336 }
337
338 return IRQ_HANDLED;
339 }
340
341 /*
342 * h3600ts_connect() is the routine that is called when someone adds a
343 * new serio device that supports H3600 protocol and registers it as
344 * an input device.
345 */
346 static int h3600ts_connect(struct serio *serio, struct serio_driver *drv)
347 {
348 struct h3600_dev *ts;
349 struct input_dev *input_dev;
350 int err;
351
352 ts = kzalloc(sizeof(struct h3600_dev), GFP_KERNEL);
353 input_dev = input_allocate_device();
354 if (!ts || !input_dev) {
355 err = -ENOMEM;
356 goto fail1;
357 }
358
359 ts->serio = serio;
360 ts->dev = input_dev;
361 snprintf(ts->phys, sizeof(ts->phys), "%s/input0", serio->phys);
362
363 input_dev->name = "H3600 TouchScreen";
364 input_dev->phys = ts->phys;
365 input_dev->id.bustype = BUS_RS232;
366 input_dev->id.vendor = SERIO_H3600;
367 input_dev->id.product = 0x0666; /* FIXME !!! We can ask the hardware */
368 input_dev->id.version = 0x0100;
369 input_dev->dev.parent = &serio->dev;
370
371 input_set_drvdata(input_dev, ts);
372
373 input_dev->event = h3600ts_event;
374
375 input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS) |
376 BIT_MASK(EV_LED) | BIT_MASK(EV_PWR);
377 input_dev->ledbit[0] = BIT_MASK(LED_SLEEP);
378 input_set_abs_params(input_dev, ABS_X, 60, 985, 0, 0);
379 input_set_abs_params(input_dev, ABS_Y, 35, 1024, 0, 0);
380
381 set_bit(KEY_RECORD, input_dev->keybit);
382 set_bit(KEY_Q, input_dev->keybit);
383 set_bit(KEY_PROG1, input_dev->keybit);
384 set_bit(KEY_PROG2, input_dev->keybit);
385 set_bit(KEY_PROG3, input_dev->keybit);
386 set_bit(KEY_UP, input_dev->keybit);
387 set_bit(KEY_RIGHT, input_dev->keybit);
388 set_bit(KEY_LEFT, input_dev->keybit);
389 set_bit(KEY_DOWN, input_dev->keybit);
390 set_bit(KEY_ENTER, input_dev->keybit);
391 set_bit(KEY_SUSPEND, input_dev->keybit);
392 set_bit(BTN_TOUCH, input_dev->keybit);
393
394 /* Device specific stuff */
395 set_GPIO_IRQ_edge(GPIO_BITSY_ACTION_BUTTON, GPIO_BOTH_EDGES);
396 set_GPIO_IRQ_edge(GPIO_BITSY_NPOWER_BUTTON, GPIO_RISING_EDGE);
397
398 if (request_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, action_button_handler,
399 IRQF_SHARED | IRQF_DISABLED, "h3600_action", &ts->dev)) {
400 printk(KERN_ERR "h3600ts.c: Could not allocate Action Button IRQ!\n");
401 err = -EBUSY;
402 goto fail2;
403 }
404
405 if (request_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, npower_button_handler,
406 IRQF_SHARED | IRQF_DISABLED, "h3600_suspend", &ts->dev)) {
407 printk(KERN_ERR "h3600ts.c: Could not allocate Power Button IRQ!\n");
408 err = -EBUSY;
409 goto fail3;
410 }
411
412 serio_set_drvdata(serio, ts);
413
414 err = serio_open(serio, drv);
415 if (err)
416 return err;
417
418 //h3600_flite_control(1, 25); /* default brightness */
419 input_register_device(ts->dev);
420
421 return 0;
422
423 fail3: free_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, ts->dev);
424 fail2: free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, ts->dev);
425 fail1: serio_set_drvdata(serio, NULL);
426 input_free_device(input_dev);
427 kfree(ts);
428 return err;
429 }
430
431 /*
432 * h3600ts_disconnect() is the opposite of h3600ts_connect()
433 */
434
435 static void h3600ts_disconnect(struct serio *serio)
436 {
437 struct h3600_dev *ts = serio_get_drvdata(serio);
438
439 free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, &ts->dev);
440 free_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, &ts->dev);
441 input_get_device(ts->dev);
442 input_unregister_device(ts->dev);
443 serio_close(serio);
444 serio_set_drvdata(serio, NULL);
445 input_put_device(ts->dev);
446 kfree(ts);
447 }
448
449 /*
450 * The serio driver structure.
451 */
452
453 static struct serio_device_id h3600ts_serio_ids[] = {
454 {
455 .type = SERIO_RS232,
456 .proto = SERIO_H3600,
457 .id = SERIO_ANY,
458 .extra = SERIO_ANY,
459 },
460 { 0 }
461 };
462
463 MODULE_DEVICE_TABLE(serio, h3600ts_serio_ids);
464
465 static struct serio_driver h3600ts_drv = {
466 .driver = {
467 .name = "h3600ts",
468 },
469 .description = DRIVER_DESC,
470 .id_table = h3600ts_serio_ids,
471 .interrupt = h3600ts_interrupt,
472 .connect = h3600ts_connect,
473 .disconnect = h3600ts_disconnect,
474 };
475
476 /*
477 * The functions for inserting/removing us as a module.
478 */
479
480 static int __init h3600ts_init(void)
481 {
482 return serio_register_driver(&h3600ts_drv);
483 }
484
485 static void __exit h3600ts_exit(void)
486 {
487 serio_unregister_driver(&h3600ts_drv);
488 }
489
490 module_init(h3600ts_init);
491 module_exit(h3600ts_exit);
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree