BUG_ON() Conversion in fs/sysv/
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / arch / alpha / boot / main.c
blob78c9b0b6eea7cdb7e1758ccbcd4e97cfef76fae4
1 /*
2 * arch/alpha/boot/main.c
4 * Copyright (C) 1994, 1995 Linus Torvalds
6 * This file is the bootloader for the Linux/AXP kernel
7 */
8 #include <linux/kernel.h>
9 #include <linux/string.h>
10 #include <linux/version.h>
11 #include <linux/mm.h>
13 #include <asm/system.h>
14 #include <asm/console.h>
15 #include <asm/hwrpb.h>
16 #include <asm/pgtable.h>
18 #include <stdarg.h>
20 #include "ksize.h"
22 extern int vsprintf(char *, const char *, va_list);
23 extern unsigned long switch_to_osf_pal(unsigned long nr,
24 struct pcb_struct * pcb_va, struct pcb_struct * pcb_pa,
25 unsigned long *vptb);
26 struct hwrpb_struct *hwrpb = INIT_HWRPB;
27 static struct pcb_struct pcb_va[1];
30 * Find a physical address of a virtual object..
32 * This is easy using the virtual page table address.
35 static inline void *
36 find_pa(unsigned long *vptb, void *ptr)
38 unsigned long address = (unsigned long) ptr;
39 unsigned long result;
41 result = vptb[address >> 13];
42 result >>= 32;
43 result <<= 13;
44 result |= address & 0x1fff;
45 return (void *) result;
49 * This function moves into OSF/1 pal-code, and has a temporary
50 * PCB for that. The kernel proper should replace this PCB with
51 * the real one as soon as possible.
53 * The page table muckery in here depends on the fact that the boot
54 * code has the L1 page table identity-map itself in the second PTE
55 * in the L1 page table. Thus the L1-page is virtually addressable
56 * itself (through three levels) at virtual address 0x200802000.
59 #define VPTB ((unsigned long *) 0x200000000)
60 #define L1 ((unsigned long *) 0x200802000)
62 void
63 pal_init(void)
65 unsigned long i, rev;
66 struct percpu_struct * percpu;
67 struct pcb_struct * pcb_pa;
69 /* Create the dummy PCB. */
70 pcb_va->ksp = 0;
71 pcb_va->usp = 0;
72 pcb_va->ptbr = L1[1] >> 32;
73 pcb_va->asn = 0;
74 pcb_va->pcc = 0;
75 pcb_va->unique = 0;
76 pcb_va->flags = 1;
77 pcb_va->res1 = 0;
78 pcb_va->res2 = 0;
79 pcb_pa = find_pa(VPTB, pcb_va);
82 * a0 = 2 (OSF)
83 * a1 = return address, but we give the asm the vaddr of the PCB
84 * a2 = physical addr of PCB
85 * a3 = new virtual page table pointer
86 * a4 = KSP (but the asm sets it)
88 srm_printk("Switching to OSF PAL-code .. ");
90 i = switch_to_osf_pal(2, pcb_va, pcb_pa, VPTB);
91 if (i) {
92 srm_printk("failed, code %ld\n", i);
93 __halt();
96 percpu = (struct percpu_struct *)
97 (INIT_HWRPB->processor_offset + (unsigned long) INIT_HWRPB);
98 rev = percpu->pal_revision = percpu->palcode_avail[2];
100 srm_printk("Ok (rev %lx)\n", rev);
102 tbia(); /* do it directly in case we are SMP */
105 static inline long openboot(void)
107 char bootdev[256];
108 long result;
110 result = callback_getenv(ENV_BOOTED_DEV, bootdev, 255);
111 if (result < 0)
112 return result;
113 return callback_open(bootdev, result & 255);
116 static inline long close(long dev)
118 return callback_close(dev);
121 static inline long load(long dev, unsigned long addr, unsigned long count)
123 char bootfile[256];
124 extern char _end;
125 long result, boot_size = &_end - (char *) BOOT_ADDR;
127 result = callback_getenv(ENV_BOOTED_FILE, bootfile, 255);
128 if (result < 0)
129 return result;
130 result &= 255;
131 bootfile[result] = '\0';
132 if (result)
133 srm_printk("Boot file specification (%s) not implemented\n",
134 bootfile);
135 return callback_read(dev, count, addr, boot_size/512 + 1);
139 * Start the kernel.
141 static void runkernel(void)
143 __asm__ __volatile__(
144 "bis %1,%1,$30\n\t"
145 "bis %0,%0,$26\n\t"
146 "ret ($26)"
147 : /* no outputs: it doesn't even return */
148 : "r" (START_ADDR),
149 "r" (PAGE_SIZE + INIT_STACK));
152 void start_kernel(void)
154 long i;
155 long dev;
156 int nbytes;
157 char envval[256];
159 srm_printk("Linux/AXP bootloader for Linux " UTS_RELEASE "\n");
160 if (INIT_HWRPB->pagesize != 8192) {
161 srm_printk("Expected 8kB pages, got %ldkB\n", INIT_HWRPB->pagesize >> 10);
162 return;
164 pal_init();
165 dev = openboot();
166 if (dev < 0) {
167 srm_printk("Unable to open boot device: %016lx\n", dev);
168 return;
170 dev &= 0xffffffff;
171 srm_printk("Loading vmlinux ...");
172 i = load(dev, START_ADDR, KERNEL_SIZE);
173 close(dev);
174 if (i != KERNEL_SIZE) {
175 srm_printk("Failed (%lx)\n", i);
176 return;
179 nbytes = callback_getenv(ENV_BOOTED_OSFLAGS, envval, sizeof(envval));
180 if (nbytes < 0) {
181 nbytes = 0;
183 envval[nbytes] = '\0';
184 strcpy((char*)ZERO_PGE, envval);
186 srm_printk(" Ok\nNow booting the kernel\n");
187 runkernel();
188 for (i = 0 ; i < 0x100000000 ; i++)
189 /* nothing */;
190 __halt();