bnx2x: fixed ethtool statistics for MF modes
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / hwmon / ltc4151.c
blob4ac06b75aa60cb1f4f29020f0fe6ef60dcdaa1f2
1 /*
2 * Driver for Linear Technology LTC4151 High Voltage I2C Current
3 * and Voltage Monitor
5 * Copyright (C) 2011 AppearTV AS
7 * Derived from:
9 * Driver for Linear Technology LTC4261 I2C Negative Voltage Hot
10 * Swap Controller
11 * Copyright (C) 2010 Ericsson AB.
13 * Datasheet: http://www.linear.com/docs/Datasheet/4151fc.pdf
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License as published by
17 * the Free Software Foundation; either version 2 of the License, or
18 * (at your option) any later version.
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
25 * You should have received a copy of the GNU General Public License
26 * along with this program; if not, write to the Free Software
27 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
31 #include <linux/kernel.h>
32 #include <linux/module.h>
33 #include <linux/init.h>
34 #include <linux/err.h>
35 #include <linux/slab.h>
36 #include <linux/i2c.h>
37 #include <linux/hwmon.h>
38 #include <linux/hwmon-sysfs.h>
40 /* chip registers */
41 #define LTC4151_SENSE_H 0x00
42 #define LTC4151_SENSE_L 0x01
43 #define LTC4151_VIN_H 0x02
44 #define LTC4151_VIN_L 0x03
45 #define LTC4151_ADIN_H 0x04
46 #define LTC4151_ADIN_L 0x05
48 struct ltc4151_data {
49 struct device *hwmon_dev;
51 struct mutex update_lock;
52 bool valid;
53 unsigned long last_updated; /* in jiffies */
55 /* Registers */
56 u8 regs[6];
59 static struct ltc4151_data *ltc4151_update_device(struct device *dev)
61 struct i2c_client *client = to_i2c_client(dev);
62 struct ltc4151_data *data = i2c_get_clientdata(client);
63 struct ltc4151_data *ret = data;
65 mutex_lock(&data->update_lock);
68 * The chip's A/D updates 6 times per second
69 * (Conversion Rate 6 - 9 Hz)
71 if (time_after(jiffies, data->last_updated + HZ / 6) || !data->valid) {
72 int i;
74 dev_dbg(&client->dev, "Starting ltc4151 update\n");
76 /* Read all registers */
77 for (i = 0; i < ARRAY_SIZE(data->regs); i++) {
78 int val;
80 val = i2c_smbus_read_byte_data(client, i);
81 if (unlikely(val < 0)) {
82 dev_dbg(dev,
83 "Failed to read ADC value: error %d\n",
84 val);
85 ret = ERR_PTR(val);
86 goto abort;
88 data->regs[i] = val;
90 data->last_updated = jiffies;
91 data->valid = 1;
93 abort:
94 mutex_unlock(&data->update_lock);
95 return ret;
98 /* Return the voltage from the given register in mV */
99 static int ltc4151_get_value(struct ltc4151_data *data, u8 reg)
101 u32 val;
103 val = (data->regs[reg] << 4) + (data->regs[reg + 1] >> 4);
105 switch (reg) {
106 case LTC4151_ADIN_H:
107 /* 500uV resolution. Convert to mV. */
108 val = val * 500 / 1000;
109 break;
110 case LTC4151_SENSE_H:
112 * 20uV resolution. Convert to current as measured with
113 * an 1 mOhm sense resistor, in mA.
115 val = val * 20;
116 break;
117 case LTC4151_VIN_H:
118 /* 25 mV per increment */
119 val = val * 25;
120 break;
121 default:
122 /* If we get here, the developer messed up */
123 WARN_ON_ONCE(1);
124 val = 0;
125 break;
128 return val;
131 static ssize_t ltc4151_show_value(struct device *dev,
132 struct device_attribute *da, char *buf)
134 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
135 struct ltc4151_data *data = ltc4151_update_device(dev);
136 int value;
138 if (IS_ERR(data))
139 return PTR_ERR(data);
141 value = ltc4151_get_value(data, attr->index);
142 return snprintf(buf, PAGE_SIZE, "%d\n", value);
146 * Input voltages.
148 static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, \
149 ltc4151_show_value, NULL, LTC4151_VIN_H);
150 static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, \
151 ltc4151_show_value, NULL, LTC4151_ADIN_H);
153 /* Currents (via sense resistor) */
154 static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, \
155 ltc4151_show_value, NULL, LTC4151_SENSE_H);
157 /* Finally, construct an array of pointers to members of the above objects,
158 * as required for sysfs_create_group()
160 static struct attribute *ltc4151_attributes[] = {
161 &sensor_dev_attr_in1_input.dev_attr.attr,
162 &sensor_dev_attr_in2_input.dev_attr.attr,
164 &sensor_dev_attr_curr1_input.dev_attr.attr,
166 NULL,
169 static const struct attribute_group ltc4151_group = {
170 .attrs = ltc4151_attributes,
173 static int ltc4151_probe(struct i2c_client *client,
174 const struct i2c_device_id *id)
176 struct i2c_adapter *adapter = client->adapter;
177 struct ltc4151_data *data;
178 int ret;
180 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
181 return -ENODEV;
183 data = kzalloc(sizeof(*data), GFP_KERNEL);
184 if (!data) {
185 ret = -ENOMEM;
186 goto out_kzalloc;
189 i2c_set_clientdata(client, data);
190 mutex_init(&data->update_lock);
192 /* Register sysfs hooks */
193 ret = sysfs_create_group(&client->dev.kobj, &ltc4151_group);
194 if (ret)
195 goto out_sysfs_create_group;
197 data->hwmon_dev = hwmon_device_register(&client->dev);
198 if (IS_ERR(data->hwmon_dev)) {
199 ret = PTR_ERR(data->hwmon_dev);
200 goto out_hwmon_device_register;
203 return 0;
205 out_hwmon_device_register:
206 sysfs_remove_group(&client->dev.kobj, &ltc4151_group);
207 out_sysfs_create_group:
208 kfree(data);
209 out_kzalloc:
210 return ret;
213 static int ltc4151_remove(struct i2c_client *client)
215 struct ltc4151_data *data = i2c_get_clientdata(client);
217 hwmon_device_unregister(data->hwmon_dev);
218 sysfs_remove_group(&client->dev.kobj, &ltc4151_group);
220 kfree(data);
222 return 0;
225 static const struct i2c_device_id ltc4151_id[] = {
226 { "ltc4151", 0 },
229 MODULE_DEVICE_TABLE(i2c, ltc4151_id);
231 /* This is the driver that will be inserted */
232 static struct i2c_driver ltc4151_driver = {
233 .driver = {
234 .name = "ltc4151",
236 .probe = ltc4151_probe,
237 .remove = ltc4151_remove,
238 .id_table = ltc4151_id,
241 static int __init ltc4151_init(void)
243 return i2c_add_driver(&ltc4151_driver);
246 static void __exit ltc4151_exit(void)
248 i2c_del_driver(&ltc4151_driver);
251 MODULE_AUTHOR("Per Dalen <per.dalen@appeartv.com>");
252 MODULE_DESCRIPTION("LTC4151 driver");
253 MODULE_LICENSE("GPL");
255 module_init(ltc4151_init);
256 module_exit(ltc4151_exit);