?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
rpc: fix garbage in printk in svc_tcp_accept()
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / spi / spi_imx.c
blob656be4a5094a68cfd1d6d10b5fb936e2dbf7a1e0
1 /*
2 * drivers/spi/spi_imx.c
3 *
4 * Copyright (C) 2006 SWAPP
5 * Andrea Paterniani <a.paterniani@swapp-eng.it>
6 *
7 * Initial version inspired by:
8 * linux-2.6.17-rc3-mm1/drivers/spi/pxa2xx_spi.c
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 */
20
21 #include <linux/init.h>
22 #include <linux/module.h>
23 #include <linux/device.h>
24 #include <linux/ioport.h>
25 #include <linux/errno.h>
26 #include <linux/interrupt.h>
27 #include <linux/platform_device.h>
28 #include <linux/dma-mapping.h>
29 #include <linux/spi/spi.h>
30 #include <linux/workqueue.h>
31 #include <linux/delay.h>
32
33 #include <asm/io.h>
34 #include <asm/irq.h>
35 #include <asm/hardware.h>
36 #include <asm/delay.h>
37
38 #include <asm/arch/hardware.h>
39 #include <asm/arch/imx-dma.h>
40 #include <asm/arch/spi_imx.h>
41
42 /*-------------------------------------------------------------------------*/
43 /* SPI Registers offsets from peripheral base address */
44 #define SPI_RXDATA (0x00)
45 #define SPI_TXDATA (0x04)
46 #define SPI_CONTROL (0x08)
47 #define SPI_INT_STATUS (0x0C)
48 #define SPI_TEST (0x10)
49 #define SPI_PERIOD (0x14)
50 #define SPI_DMA (0x18)
51 #define SPI_RESET (0x1C)
52
53 /* SPI Control Register Bit Fields & Masks */
54 #define SPI_CONTROL_BITCOUNT_MASK (0xF) /* Bit Count Mask */
55 #define SPI_CONTROL_BITCOUNT(n) (((n) - 1) & SPI_CONTROL_BITCOUNT_MASK)
56 #define SPI_CONTROL_POL (0x1 << 4) /* Clock Polarity Mask */
57 #define SPI_CONTROL_POL_ACT_HIGH (0x0 << 4) /* Active high pol. (0=idle) */
58 #define SPI_CONTROL_POL_ACT_LOW (0x1 << 4) /* Active low pol. (1=idle) */
59 #define SPI_CONTROL_PHA (0x1 << 5) /* Clock Phase Mask */
60 #define SPI_CONTROL_PHA_0 (0x0 << 5) /* Clock Phase 0 */
61 #define SPI_CONTROL_PHA_1 (0x1 << 5) /* Clock Phase 1 */
62 #define SPI_CONTROL_SSCTL (0x1 << 6) /* /SS Waveform Select Mask */
63 #define SPI_CONTROL_SSCTL_0 (0x0 << 6) /* Master: /SS stays low between SPI burst
64 Slave: RXFIFO advanced by BIT_COUNT */
65 #define SPI_CONTROL_SSCTL_1 (0x1 << 6) /* Master: /SS insert pulse between SPI burst
66 Slave: RXFIFO advanced by /SS rising edge */
67 #define SPI_CONTROL_SSPOL (0x1 << 7) /* /SS Polarity Select Mask */
68 #define SPI_CONTROL_SSPOL_ACT_LOW (0x0 << 7) /* /SS Active low */
69 #define SPI_CONTROL_SSPOL_ACT_HIGH (0x1 << 7) /* /SS Active high */
70 #define SPI_CONTROL_XCH (0x1 << 8) /* Exchange */
71 #define SPI_CONTROL_SPIEN (0x1 << 9) /* SPI Module Enable */
72 #define SPI_CONTROL_MODE (0x1 << 10) /* SPI Mode Select Mask */
73 #define SPI_CONTROL_MODE_SLAVE (0x0 << 10) /* SPI Mode Slave */
74 #define SPI_CONTROL_MODE_MASTER (0x1 << 10) /* SPI Mode Master */
75 #define SPI_CONTROL_DRCTL (0x3 << 11) /* /SPI_RDY Control Mask */
76 #define SPI_CONTROL_DRCTL_0 (0x0 << 11) /* Ignore /SPI_RDY */
77 #define SPI_CONTROL_DRCTL_1 (0x1 << 11) /* /SPI_RDY falling edge triggers input */
78 #define SPI_CONTROL_DRCTL_2 (0x2 << 11) /* /SPI_RDY active low level triggers input */
79 #define SPI_CONTROL_DATARATE (0x7 << 13) /* Data Rate Mask */
80 #define SPI_PERCLK2_DIV_MIN (0) /* PERCLK2:4 */
81 #define SPI_PERCLK2_DIV_MAX (7) /* PERCLK2:512 */
82 #define SPI_CONTROL_DATARATE_MIN (SPI_PERCLK2_DIV_MAX << 13)
83 #define SPI_CONTROL_DATARATE_MAX (SPI_PERCLK2_DIV_MIN << 13)
84 #define SPI_CONTROL_DATARATE_BAD (SPI_CONTROL_DATARATE_MIN + 1)
85
86 /* SPI Interrupt/Status Register Bit Fields & Masks */
87 #define SPI_STATUS_TE (0x1 << 0) /* TXFIFO Empty Status */
88 #define SPI_STATUS_TH (0x1 << 1) /* TXFIFO Half Status */
89 #define SPI_STATUS_TF (0x1 << 2) /* TXFIFO Full Status */
90 #define SPI_STATUS_RR (0x1 << 3) /* RXFIFO Data Ready Status */
91 #define SPI_STATUS_RH (0x1 << 4) /* RXFIFO Half Status */
92 #define SPI_STATUS_RF (0x1 << 5) /* RXFIFO Full Status */
93 #define SPI_STATUS_RO (0x1 << 6) /* RXFIFO Overflow */
94 #define SPI_STATUS_BO (0x1 << 7) /* Bit Count Overflow */
95 #define SPI_STATUS (0xFF) /* SPI Status Mask */
96 #define SPI_INTEN_TE (0x1 << 8) /* TXFIFO Empty Interrupt Enable */
97 #define SPI_INTEN_TH (0x1 << 9) /* TXFIFO Half Interrupt Enable */
98 #define SPI_INTEN_TF (0x1 << 10) /* TXFIFO Full Interrupt Enable */
99 #define SPI_INTEN_RE (0x1 << 11) /* RXFIFO Data Ready Interrupt Enable */
100 #define SPI_INTEN_RH (0x1 << 12) /* RXFIFO Half Interrupt Enable */
101 #define SPI_INTEN_RF (0x1 << 13) /* RXFIFO Full Interrupt Enable */
102 #define SPI_INTEN_RO (0x1 << 14) /* RXFIFO Overflow Interrupt Enable */
103 #define SPI_INTEN_BO (0x1 << 15) /* Bit Count Overflow Interrupt Enable */
104 #define SPI_INTEN (0xFF << 8) /* SPI Interrupt Enable Mask */
105
106 /* SPI Test Register Bit Fields & Masks */
107 #define SPI_TEST_TXCNT (0xF << 0) /* TXFIFO Counter */
108 #define SPI_TEST_RXCNT_LSB (4) /* RXFIFO Counter LSB */
109 #define SPI_TEST_RXCNT (0xF << 4) /* RXFIFO Counter */
110 #define SPI_TEST_SSTATUS (0xF << 8) /* State Machine Status */
111 #define SPI_TEST_LBC (0x1 << 14) /* Loop Back Control */
112
113 /* SPI Period Register Bit Fields & Masks */
114 #define SPI_PERIOD_WAIT (0x7FFF << 0) /* Wait Between Transactions */
115 #define SPI_PERIOD_MAX_WAIT (0x7FFF) /* Max Wait Between
116 Transactions */
117 #define SPI_PERIOD_CSRC (0x1 << 15) /* Period Clock Source Mask */
118 #define SPI_PERIOD_CSRC_BCLK (0x0 << 15) /* Period Clock Source is
119 Bit Clock */
120 #define SPI_PERIOD_CSRC_32768 (0x1 << 15) /* Period Clock Source is
121 32.768 KHz Clock */
122
123 /* SPI DMA Register Bit Fields & Masks */
124 #define SPI_DMA_RHDMA (0x1 << 4) /* RXFIFO Half Status */
125 #define SPI_DMA_RFDMA (0x1 << 5) /* RXFIFO Full Status */
126 #define SPI_DMA_TEDMA (0x1 << 6) /* TXFIFO Empty Status */
127 #define SPI_DMA_THDMA (0x1 << 7) /* TXFIFO Half Status */
128 #define SPI_DMA_RHDEN (0x1 << 12) /* RXFIFO Half DMA Request Enable */
129 #define SPI_DMA_RFDEN (0x1 << 13) /* RXFIFO Full DMA Request Enable */
130 #define SPI_DMA_TEDEN (0x1 << 14) /* TXFIFO Empty DMA Request Enable */
131 #define SPI_DMA_THDEN (0x1 << 15) /* TXFIFO Half DMA Request Enable */
132
133 /* SPI Soft Reset Register Bit Fields & Masks */
134 #define SPI_RESET_START (0x1) /* Start */
135
136 /* Default SPI configuration values */
137 #define SPI_DEFAULT_CONTROL \
138 ( \
139 SPI_CONTROL_BITCOUNT(16) | \
140 SPI_CONTROL_POL_ACT_HIGH | \
141 SPI_CONTROL_PHA_0 | \
142 SPI_CONTROL_SPIEN | \
143 SPI_CONTROL_SSCTL_1 | \
144 SPI_CONTROL_MODE_MASTER | \
145 SPI_CONTROL_DRCTL_0 | \
146 SPI_CONTROL_DATARATE_MIN \
147 )
148 #define SPI_DEFAULT_ENABLE_LOOPBACK (0)
149 #define SPI_DEFAULT_ENABLE_DMA (0)
150 #define SPI_DEFAULT_PERIOD_WAIT (8)
151 /*-------------------------------------------------------------------------*/
152
153
154 /*-------------------------------------------------------------------------*/
155 /* TX/RX SPI FIFO size */
156 #define SPI_FIFO_DEPTH (8)
157 #define SPI_FIFO_BYTE_WIDTH (2)
158 #define SPI_FIFO_OVERFLOW_MARGIN (2)
159
160 /* DMA burst lenght for half full/empty request trigger */
161 #define SPI_DMA_BLR (SPI_FIFO_DEPTH * SPI_FIFO_BYTE_WIDTH / 2)
162
163 /* Dummy char output to achieve reads.
164 Choosing something different from all zeroes may help pattern recogition
165 for oscilloscope analysis, but may break some drivers. */
166 #define SPI_DUMMY_u8 0
167 #define SPI_DUMMY_u16 ((SPI_DUMMY_u8 << 8) | SPI_DUMMY_u8)
168 #define SPI_DUMMY_u32 ((SPI_DUMMY_u16 << 16) | SPI_DUMMY_u16)
169
170 /**
171 * Macro to change a u32 field:
172 * @r : register to edit
173 * @m : bit mask
174 * @v : new value for the field correctly bit-alligned
175 */
176 #define u32_EDIT(r, m, v) r = (r & ~(m)) | (v)
177
178 /* Message state */
179 #define START_STATE ((void*)0)
180 #define RUNNING_STATE ((void*)1)
181 #define DONE_STATE ((void*)2)
182 #define ERROR_STATE ((void*)-1)
183
184 /* Queue state */
185 #define QUEUE_RUNNING (0)
186 #define QUEUE_STOPPED (1)
187
188 #define IS_DMA_ALIGNED(x) (((u32)(x) & 0x03) == 0)
189 /*-------------------------------------------------------------------------*/
190
191
192 /*-------------------------------------------------------------------------*/
193 /* Driver data structs */
194
195 /* Context */
196 struct driver_data {
197 /* Driver model hookup */
198 struct platform_device *pdev;
199
200 /* SPI framework hookup */
201 struct spi_master *master;
202
203 /* IMX hookup */
204 struct spi_imx_master *master_info;
205
206 /* Memory resources and SPI regs virtual address */
207 struct resource *ioarea;
208 void __iomem *regs;
209
210 /* SPI RX_DATA physical address */
211 dma_addr_t rd_data_phys;
212
213 /* Driver message queue */
214 struct workqueue_struct *workqueue;
215 struct work_struct work;
216 spinlock_t lock;
217 struct list_head queue;
218 int busy;
219 int run;
220
221 /* Message Transfer pump */
222 struct tasklet_struct pump_transfers;
223
224 /* Current message, transfer and state */
225 struct spi_message *cur_msg;
226 struct spi_transfer *cur_transfer;
227 struct chip_data *cur_chip;
228
229 /* Rd / Wr buffers pointers */
230 size_t len;
231 void *tx;
232 void *tx_end;
233 void *rx;
234 void *rx_end;
235
236 u8 rd_only;
237 u8 n_bytes;
238 int cs_change;
239
240 /* Function pointers */
241 irqreturn_t (*transfer_handler)(struct driver_data *drv_data);
242 void (*cs_control)(u32 command);
243
244 /* DMA setup */
245 int rx_channel;
246 int tx_channel;
247 dma_addr_t rx_dma;
248 dma_addr_t tx_dma;
249 int rx_dma_needs_unmap;
250 int tx_dma_needs_unmap;
251 size_t tx_map_len;
252 u32 dummy_dma_buf ____cacheline_aligned;
253 };
254
255 /* Runtime state */
256 struct chip_data {
257 u32 control;
258 u32 period;
259 u32 test;
260
261 u8 enable_dma:1;
262 u8 bits_per_word;
263 u8 n_bytes;
264 u32 max_speed_hz;
265
266 void (*cs_control)(u32 command);
267 };
268 /*-------------------------------------------------------------------------*/
269
270
271 static void pump_messages(struct work_struct *work);
272
273 static int flush(struct driver_data *drv_data)
274 {
275 unsigned long limit = loops_per_jiffy << 1;
276 void __iomem *regs = drv_data->regs;
277 volatile u32 d;
278
279 dev_dbg(&drv_data->pdev->dev, "flush\n");
280 do {
281 while (readl(regs + SPI_INT_STATUS) & SPI_STATUS_RR)
282 d = readl(regs + SPI_RXDATA);
283 } while ((readl(regs + SPI_CONTROL) & SPI_CONTROL_XCH) && limit--);
284
285 return limit;
286 }
287
288 static void restore_state(struct driver_data *drv_data)
289 {
290 void __iomem *regs = drv_data->regs;
291 struct chip_data *chip = drv_data->cur_chip;
292
293 /* Load chip registers */
294 dev_dbg(&drv_data->pdev->dev,
295 "restore_state\n"
296 " test = 0x%08X\n"
297 " control = 0x%08X\n",
298 chip->test,
299 chip->control);
300 writel(chip->test, regs + SPI_TEST);
301 writel(chip->period, regs + SPI_PERIOD);
302 writel(0, regs + SPI_INT_STATUS);
303 writel(chip->control, regs + SPI_CONTROL);
304 }
305
306 static void null_cs_control(u32 command)
307 {
308 }
309
310 static inline u32 data_to_write(struct driver_data *drv_data)
311 {
312 return ((u32)(drv_data->tx_end - drv_data->tx)) / drv_data->n_bytes;
313 }
314
315 static inline u32 data_to_read(struct driver_data *drv_data)
316 {
317 return ((u32)(drv_data->rx_end - drv_data->rx)) / drv_data->n_bytes;
318 }
319
320 static int write(struct driver_data *drv_data)
321 {
322 void __iomem *regs = drv_data->regs;
323 void *tx = drv_data->tx;
324 void *tx_end = drv_data->tx_end;
325 u8 n_bytes = drv_data->n_bytes;
326 u32 remaining_writes;
327 u32 fifo_avail_space;
328 u32 n;
329 u16 d;
330
331 /* Compute how many fifo writes to do */
332 remaining_writes = (u32)(tx_end - tx) / n_bytes;
333 fifo_avail_space = SPI_FIFO_DEPTH -
334 (readl(regs + SPI_TEST) & SPI_TEST_TXCNT);
335 if (drv_data->rx && (fifo_avail_space > SPI_FIFO_OVERFLOW_MARGIN))
336 /* Fix misunderstood receive overflow */
337 fifo_avail_space -= SPI_FIFO_OVERFLOW_MARGIN;
338 n = min(remaining_writes, fifo_avail_space);
339
340 dev_dbg(&drv_data->pdev->dev,
341 "write type %s\n"
342 " remaining writes = %d\n"
343 " fifo avail space = %d\n"
344 " fifo writes = %d\n",
345 (n_bytes == 1) ? "u8" : "u16",
346 remaining_writes,
347 fifo_avail_space,
348 n);
349
350 if (n > 0) {
351 /* Fill SPI TXFIFO */
352 if (drv_data->rd_only) {
353 tx += n * n_bytes;
354 while (n--)
355 writel(SPI_DUMMY_u16, regs + SPI_TXDATA);
356 } else {
357 if (n_bytes == 1) {
358 while (n--) {
359 d = *(u8*)tx;
360 writel(d, regs + SPI_TXDATA);
361 tx += 1;
362 }
363 } else {
364 while (n--) {
365 d = *(u16*)tx;
366 writel(d, regs + SPI_TXDATA);
367 tx += 2;
368 }
369 }
370 }
371
372 /* Trigger transfer */
373 writel(readl(regs + SPI_CONTROL) | SPI_CONTROL_XCH,
374 regs + SPI_CONTROL);
375
376 /* Update tx pointer */
377 drv_data->tx = tx;
378 }
379
380 return (tx >= tx_end);
381 }
382
383 static int read(struct driver_data *drv_data)
384 {
385 void __iomem *regs = drv_data->regs;
386 void *rx = drv_data->rx;
387 void *rx_end = drv_data->rx_end;
388 u8 n_bytes = drv_data->n_bytes;
389 u32 remaining_reads;
390 u32 fifo_rxcnt;
391 u32 n;
392 u16 d;
393
394 /* Compute how many fifo reads to do */
395 remaining_reads = (u32)(rx_end - rx) / n_bytes;
396 fifo_rxcnt = (readl(regs + SPI_TEST) & SPI_TEST_RXCNT) >>
397 SPI_TEST_RXCNT_LSB;
398 n = min(remaining_reads, fifo_rxcnt);
399
400 dev_dbg(&drv_data->pdev->dev,
401 "read type %s\n"
402 " remaining reads = %d\n"
403 " fifo rx count = %d\n"
404 " fifo reads = %d\n",
405 (n_bytes == 1) ? "u8" : "u16",
406 remaining_reads,
407 fifo_rxcnt,
408 n);
409
410 if (n > 0) {
411 /* Read SPI RXFIFO */
412 if (n_bytes == 1) {
413 while (n--) {
414 d = readl(regs + SPI_RXDATA);
415 *((u8*)rx) = d;
416 rx += 1;
417 }
418 } else {
419 while (n--) {
420 d = readl(regs + SPI_RXDATA);
421 *((u16*)rx) = d;
422 rx += 2;
423 }
424 }
425
426 /* Update rx pointer */
427 drv_data->rx = rx;
428 }
429
430 return (rx >= rx_end);
431 }
432
433 static void *next_transfer(struct driver_data *drv_data)
434 {
435 struct spi_message *msg = drv_data->cur_msg;
436 struct spi_transfer *trans = drv_data->cur_transfer;
437
438 /* Move to next transfer */
439 if (trans->transfer_list.next != &msg->transfers) {
440 drv_data->cur_transfer =
441 list_entry(trans->transfer_list.next,
442 struct spi_transfer,
443 transfer_list);
444 return RUNNING_STATE;
445 }
446
447 return DONE_STATE;
448 }
449
450 static int map_dma_buffers(struct driver_data *drv_data)
451 {
452 struct spi_message *msg;
453 struct device *dev;
454 void *buf;
455
456 drv_data->rx_dma_needs_unmap = 0;
457 drv_data->tx_dma_needs_unmap = 0;
458
459 if (!drv_data->master_info->enable_dma ||
460 !drv_data->cur_chip->enable_dma)
461 return -1;
462
463 msg = drv_data->cur_msg;
464 dev = &msg->spi->dev;
465 if (msg->is_dma_mapped) {
466 if (drv_data->tx_dma)
467 /* The caller provided at least dma and cpu virtual
468 address for write; pump_transfers() will consider the
469 transfer as write only if cpu rx virtual address is
470 NULL */
471 return 0;
472
473 if (drv_data->rx_dma) {
474 /* The caller provided dma and cpu virtual address to
475 performe read only transfer -->
476 use drv_data->dummy_dma_buf for dummy writes to
477 achive reads */
478 buf = &drv_data->dummy_dma_buf;
479 drv_data->tx_map_len = sizeof(drv_data->dummy_dma_buf);
480 drv_data->tx_dma = dma_map_single(dev,
481 buf,
482 drv_data->tx_map_len,
483 DMA_TO_DEVICE);
484 if (dma_mapping_error(drv_data->tx_dma))
485 return -1;
486
487 drv_data->tx_dma_needs_unmap = 1;
488
489 /* Flags transfer as rd_only for pump_transfers() DMA
490 regs programming (should be redundant) */
491 drv_data->tx = NULL;
492
493 return 0;
494 }
495 }
496
497 if (!IS_DMA_ALIGNED(drv_data->rx) || !IS_DMA_ALIGNED(drv_data->tx))
498 return -1;
499
500 /* NULL rx means write-only transfer and no map needed
501 since rx DMA will not be used */
502 if (drv_data->rx) {
503 buf = drv_data->rx;
504 drv_data->rx_dma = dma_map_single(
505 dev,
506 buf,
507 drv_data->len,
508 DMA_FROM_DEVICE);
509 if (dma_mapping_error(drv_data->rx_dma))
510 return -1;
511 drv_data->rx_dma_needs_unmap = 1;
512 }
513
514 if (drv_data->tx == NULL) {
515 /* Read only message --> use drv_data->dummy_dma_buf for dummy
516 writes to achive reads */
517 buf = &drv_data->dummy_dma_buf;
518 drv_data->tx_map_len = sizeof(drv_data->dummy_dma_buf);
519 } else {
520 buf = drv_data->tx;
521 drv_data->tx_map_len = drv_data->len;
522 }
523 drv_data->tx_dma = dma_map_single(dev,
524 buf,
525 drv_data->tx_map_len,
526 DMA_TO_DEVICE);
527 if (dma_mapping_error(drv_data->tx_dma)) {
528 if (drv_data->rx_dma) {
529 dma_unmap_single(dev,
530 drv_data->rx_dma,
531 drv_data->len,
532 DMA_FROM_DEVICE);
533 drv_data->rx_dma_needs_unmap = 0;
534 }
535 return -1;
536 }
537 drv_data->tx_dma_needs_unmap = 1;
538
539 return 0;
540 }
541
542 static void unmap_dma_buffers(struct driver_data *drv_data)
543 {
544 struct spi_message *msg = drv_data->cur_msg;
545 struct device *dev = &msg->spi->dev;
546
547 if (drv_data->rx_dma_needs_unmap) {
548 dma_unmap_single(dev,
549 drv_data->rx_dma,
550 drv_data->len,
551 DMA_FROM_DEVICE);
552 drv_data->rx_dma_needs_unmap = 0;
553 }
554 if (drv_data->tx_dma_needs_unmap) {
555 dma_unmap_single(dev,
556 drv_data->tx_dma,
557 drv_data->tx_map_len,
558 DMA_TO_DEVICE);
559 drv_data->tx_dma_needs_unmap = 0;
560 }
561 }
562
563 /* Caller already set message->status (dma is already blocked) */
564 static void giveback(struct spi_message *message, struct driver_data *drv_data)
565 {
566 void __iomem *regs = drv_data->regs;
567
568 /* Bring SPI to sleep; restore_state() and pump_transfer()
569 will do new setup */
570 writel(0, regs + SPI_INT_STATUS);
571 writel(0, regs + SPI_DMA);
572
573 drv_data->cs_control(SPI_CS_DEASSERT);
574
575 message->state = NULL;
576 if (message->complete)
577 message->complete(message->context);
578
579 drv_data->cur_msg = NULL;
580 drv_data->cur_transfer = NULL;
581 drv_data->cur_chip = NULL;
582 queue_work(drv_data->workqueue, &drv_data->work);
583 }
584
585 static void dma_err_handler(int channel, void *data, int errcode)
586 {
587 struct driver_data *drv_data = data;
588 struct spi_message *msg = drv_data->cur_msg;
589
590 dev_dbg(&drv_data->pdev->dev, "dma_err_handler\n");
591
592 /* Disable both rx and tx dma channels */
593 imx_dma_disable(drv_data->rx_channel);
594 imx_dma_disable(drv_data->tx_channel);
595
596 if (flush(drv_data) == 0)
597 dev_err(&drv_data->pdev->dev,
598 "dma_err_handler - flush failed\n");
599
600 unmap_dma_buffers(drv_data);
601
602 msg->state = ERROR_STATE;
603 tasklet_schedule(&drv_data->pump_transfers);
604 }
605
606 static void dma_tx_handler(int channel, void *data)
607 {
608 struct driver_data *drv_data = data;
609
610 dev_dbg(&drv_data->pdev->dev, "dma_tx_handler\n");
611
612 imx_dma_disable(channel);
613
614 /* Now waits for TX FIFO empty */
615 writel(readl(drv_data->regs + SPI_INT_STATUS) | SPI_INTEN_TE,
616 drv_data->regs + SPI_INT_STATUS);
617 }
618
619 static irqreturn_t dma_transfer(struct driver_data *drv_data)
620 {
621 u32 status;
622 struct spi_message *msg = drv_data->cur_msg;
623 void __iomem *regs = drv_data->regs;
624 unsigned long limit;
625
626 status = readl(regs + SPI_INT_STATUS);
627
628 if ((status & SPI_INTEN_RO) && (status & SPI_STATUS_RO)) {
629 writel(status & ~SPI_INTEN, regs + SPI_INT_STATUS);
630
631 imx_dma_disable(drv_data->rx_channel);
632 unmap_dma_buffers(drv_data);
633
634 if (flush(drv_data) == 0)
635 dev_err(&drv_data->pdev->dev,
636 "dma_transfer - flush failed\n");
637
638 dev_warn(&drv_data->pdev->dev,
639 "dma_transfer - fifo overun\n");
640
641 msg->state = ERROR_STATE;
642 tasklet_schedule(&drv_data->pump_transfers);
643
644 return IRQ_HANDLED;
645 }
646
647 if (status & SPI_STATUS_TE) {
648 writel(status & ~SPI_INTEN_TE, regs + SPI_INT_STATUS);
649
650 if (drv_data->rx) {
651 /* Wait end of transfer before read trailing data */
652 limit = loops_per_jiffy << 1;
653 while ((readl(regs + SPI_CONTROL) & SPI_CONTROL_XCH) &&
654 limit--);
655
656 if (limit == 0)
657 dev_err(&drv_data->pdev->dev,
658 "dma_transfer - end of tx failed\n");
659 else
660 dev_dbg(&drv_data->pdev->dev,
661 "dma_transfer - end of tx\n");
662
663 imx_dma_disable(drv_data->rx_channel);
664 unmap_dma_buffers(drv_data);
665
666 /* Calculate number of trailing data and read them */
667 dev_dbg(&drv_data->pdev->dev,
668 "dma_transfer - test = 0x%08X\n",
669 readl(regs + SPI_TEST));
670 drv_data->rx = drv_data->rx_end -
671 ((readl(regs + SPI_TEST) &
672 SPI_TEST_RXCNT) >>
673 SPI_TEST_RXCNT_LSB)*drv_data->n_bytes;
674 read(drv_data);
675 } else {
676 /* Write only transfer */
677 unmap_dma_buffers(drv_data);
678
679 if (flush(drv_data) == 0)
680 dev_err(&drv_data->pdev->dev,
681 "dma_transfer - flush failed\n");
682 }
683
684 /* End of transfer, update total byte transfered */
685 msg->actual_length += drv_data->len;
686
687 /* Release chip select if requested, transfer delays are
688 handled in pump_transfers() */
689 if (drv_data->cs_change)
690 drv_data->cs_control(SPI_CS_DEASSERT);
691
692 /* Move to next transfer */
693 msg->state = next_transfer(drv_data);
694
695 /* Schedule transfer tasklet */
696 tasklet_schedule(&drv_data->pump_transfers);
697
698 return IRQ_HANDLED;
699 }
700
701 /* Opps problem detected */
702 return IRQ_NONE;
703 }
704
705 static irqreturn_t interrupt_wronly_transfer(struct driver_data *drv_data)
706 {
707 struct spi_message *msg = drv_data->cur_msg;
708 void __iomem *regs = drv_data->regs;
709 u32 status;
710 irqreturn_t handled = IRQ_NONE;
711
712 status = readl(regs + SPI_INT_STATUS);
713
714 while (status & SPI_STATUS_TH) {
715 dev_dbg(&drv_data->pdev->dev,
716 "interrupt_wronly_transfer - status = 0x%08X\n", status);
717
718 /* Pump data */
719 if (write(drv_data)) {
720 writel(readl(regs + SPI_INT_STATUS) & ~SPI_INTEN,
721 regs + SPI_INT_STATUS);
722
723 dev_dbg(&drv_data->pdev->dev,
724 "interrupt_wronly_transfer - end of tx\n");
725
726 if (flush(drv_data) == 0)
727 dev_err(&drv_data->pdev->dev,
728 "interrupt_wronly_transfer - "
729 "flush failed\n");
730
731 /* End of transfer, update total byte transfered */
732 msg->actual_length += drv_data->len;
733
734 /* Release chip select if requested, transfer delays are
735 handled in pump_transfers */
736 if (drv_data->cs_change)
737 drv_data->cs_control(SPI_CS_DEASSERT);
738
739 /* Move to next transfer */
740 msg->state = next_transfer(drv_data);
741
742 /* Schedule transfer tasklet */
743 tasklet_schedule(&drv_data->pump_transfers);
744
745 return IRQ_HANDLED;
746 }
747
748 status = readl(regs + SPI_INT_STATUS);
749
750 /* We did something */
751 handled = IRQ_HANDLED;
752 }
753
754 return handled;
755 }
756
757 static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
758 {
759 struct spi_message *msg = drv_data->cur_msg;
760 void __iomem *regs = drv_data->regs;
761 u32 status;
762 irqreturn_t handled = IRQ_NONE;
763 unsigned long limit;
764
765 status = readl(regs + SPI_INT_STATUS);
766
767 while (status & (SPI_STATUS_TH | SPI_STATUS_RO)) {
768 dev_dbg(&drv_data->pdev->dev,
769 "interrupt_transfer - status = 0x%08X\n", status);
770
771 if (status & SPI_STATUS_RO) {
772 writel(readl(regs + SPI_INT_STATUS) & ~SPI_INTEN,
773 regs + SPI_INT_STATUS);
774
775 dev_warn(&drv_data->pdev->dev,
776 "interrupt_transfer - fifo overun\n"
777 " data not yet written = %d\n"
778 " data not yet read = %d\n",
779 data_to_write(drv_data),
780 data_to_read(drv_data));
781
782 if (flush(drv_data) == 0)
783 dev_err(&drv_data->pdev->dev,
784 "interrupt_transfer - flush failed\n");
785
786 msg->state = ERROR_STATE;
787 tasklet_schedule(&drv_data->pump_transfers);
788
789 return IRQ_HANDLED;
790 }
791
792 /* Pump data */
793 read(drv_data);
794 if (write(drv_data)) {
795 writel(readl(regs + SPI_INT_STATUS) & ~SPI_INTEN,
796 regs + SPI_INT_STATUS);
797
798 dev_dbg(&drv_data->pdev->dev,
799 "interrupt_transfer - end of tx\n");
800
801 /* Read trailing bytes */
802 limit = loops_per_jiffy << 1;
803 while ((read(drv_data) == 0) && limit--);
804
805 if (limit == 0)
806 dev_err(&drv_data->pdev->dev,
807 "interrupt_transfer - "
808 "trailing byte read failed\n");
809 else
810 dev_dbg(&drv_data->pdev->dev,
811 "interrupt_transfer - end of rx\n");
812
813 /* End of transfer, update total byte transfered */
814 msg->actual_length += drv_data->len;
815
816 /* Release chip select if requested, transfer delays are
817 handled in pump_transfers */
818 if (drv_data->cs_change)
819 drv_data->cs_control(SPI_CS_DEASSERT);
820
821 /* Move to next transfer */
822 msg->state = next_transfer(drv_data);
823
824 /* Schedule transfer tasklet */
825 tasklet_schedule(&drv_data->pump_transfers);
826
827 return IRQ_HANDLED;
828 }
829
830 status = readl(regs + SPI_INT_STATUS);
831
832 /* We did something */
833 handled = IRQ_HANDLED;
834 }
835
836 return handled;
837 }
838
839 static irqreturn_t spi_int(int irq, void *dev_id)
840 {
841 struct driver_data *drv_data = (struct driver_data *)dev_id;
842
843 if (!drv_data->cur_msg) {
844 dev_err(&drv_data->pdev->dev,
845 "spi_int - bad message state\n");
846 /* Never fail */
847 return IRQ_HANDLED;
848 }
849
850 return drv_data->transfer_handler(drv_data);
851 }
852
853 static inline u32 spi_speed_hz(u32 data_rate)
854 {
855 return imx_get_perclk2() / (4 << ((data_rate) >> 13));
856 }
857
858 static u32 spi_data_rate(u32 speed_hz)
859 {
860 u32 div;
861 u32 quantized_hz = imx_get_perclk2() >> 2;
862
863 for (div = SPI_PERCLK2_DIV_MIN;
864 div <= SPI_PERCLK2_DIV_MAX;
865 div++, quantized_hz >>= 1) {
866 if (quantized_hz <= speed_hz)
867 /* Max available speed LEQ required speed */
868 return div << 13;
869 }
870 return SPI_CONTROL_DATARATE_BAD;
871 }
872
873 static void pump_transfers(unsigned long data)
874 {
875 struct driver_data *drv_data = (struct driver_data *)data;
876 struct spi_message *message;
877 struct spi_transfer *transfer, *previous;
878 struct chip_data *chip;
879 void __iomem *regs;
880 u32 tmp, control;
881
882 dev_dbg(&drv_data->pdev->dev, "pump_transfer\n");
883
884 message = drv_data->cur_msg;
885
886 /* Handle for abort */
887 if (message->state == ERROR_STATE) {
888 message->status = -EIO;
889 giveback(message, drv_data);
890 return;
891 }
892
893 /* Handle end of message */
894 if (message->state == DONE_STATE) {
895 message->status = 0;
896 giveback(message, drv_data);
897 return;
898 }
899
900 chip = drv_data->cur_chip;
901
902 /* Delay if requested at end of transfer*/
903 transfer = drv_data->cur_transfer;
904 if (message->state == RUNNING_STATE) {
905 previous = list_entry(transfer->transfer_list.prev,
906 struct spi_transfer,
907 transfer_list);
908 if (previous->delay_usecs)
909 udelay(previous->delay_usecs);
910 } else {
911 /* START_STATE */
912 message->state = RUNNING_STATE;
913 drv_data->cs_control = chip->cs_control;
914 }
915
916 transfer = drv_data->cur_transfer;
917 drv_data->tx = (void *)transfer->tx_buf;
918 drv_data->tx_end = drv_data->tx + transfer->len;
919 drv_data->rx = transfer->rx_buf;
920 drv_data->rx_end = drv_data->rx + transfer->len;
921 drv_data->rx_dma = transfer->rx_dma;
922 drv_data->tx_dma = transfer->tx_dma;
923 drv_data->len = transfer->len;
924 drv_data->cs_change = transfer->cs_change;
925 drv_data->rd_only = (drv_data->tx == NULL);
926
927 regs = drv_data->regs;
928 control = readl(regs + SPI_CONTROL);
929
930 /* Bits per word setup */
931 tmp = transfer->bits_per_word;
932 if (tmp == 0) {
933 /* Use device setup */
934 tmp = chip->bits_per_word;
935 drv_data->n_bytes = chip->n_bytes;
936 } else
937 /* Use per-transfer setup */
938 drv_data->n_bytes = (tmp <= 8) ? 1 : 2;
939 u32_EDIT(control, SPI_CONTROL_BITCOUNT_MASK, tmp - 1);
940
941 /* Speed setup (surely valid because already checked) */
942 tmp = transfer->speed_hz;
943 if (tmp == 0)
944 tmp = chip->max_speed_hz;
945 tmp = spi_data_rate(tmp);
946 u32_EDIT(control, SPI_CONTROL_DATARATE, tmp);
947
948 writel(control, regs + SPI_CONTROL);
949
950 /* Assert device chip-select */
951 drv_data->cs_control(SPI_CS_ASSERT);
952
953 /* DMA cannot read/write SPI FIFOs other than 16 bits at a time; hence
954 if bits_per_word is less or equal 8 PIO transfers are performed.
955 Moreover DMA is convinient for transfer length bigger than FIFOs
956 byte size. */
957 if ((drv_data->n_bytes == 2) &&
958 (drv_data->len > SPI_FIFO_DEPTH*SPI_FIFO_BYTE_WIDTH) &&
959 (map_dma_buffers(drv_data) == 0)) {
960 dev_dbg(&drv_data->pdev->dev,
961 "pump dma transfer\n"
962 " tx = %p\n"
963 " tx_dma = %08X\n"
964 " rx = %p\n"
965 " rx_dma = %08X\n"
966 " len = %d\n",
967 drv_data->tx,
968 (unsigned int)drv_data->tx_dma,
969 drv_data->rx,
970 (unsigned int)drv_data->rx_dma,
971 drv_data->len);
972
973 /* Ensure we have the correct interrupt handler */
974 drv_data->transfer_handler = dma_transfer;
975
976 /* Trigger transfer */
977 writel(readl(regs + SPI_CONTROL) | SPI_CONTROL_XCH,
978 regs + SPI_CONTROL);
979
980 /* Setup tx DMA */
981 if (drv_data->tx)
982 /* Linear source address */
983 CCR(drv_data->tx_channel) =
984 CCR_DMOD_FIFO |
985 CCR_SMOD_LINEAR |
986 CCR_SSIZ_32 | CCR_DSIZ_16 |
987 CCR_REN;
988 else
989 /* Read only transfer -> fixed source address for
990 dummy write to achive read */
991 CCR(drv_data->tx_channel) =
992 CCR_DMOD_FIFO |
993 CCR_SMOD_FIFO |
994 CCR_SSIZ_32 | CCR_DSIZ_16 |
995 CCR_REN;
996
997 imx_dma_setup_single(
998 drv_data->tx_channel,
999 drv_data->tx_dma,
1000 drv_data->len,
1001 drv_data->rd_data_phys + 4,
1002 DMA_MODE_WRITE);
1003
1004 if (drv_data->rx) {
1005 /* Setup rx DMA for linear destination address */
1006 CCR(drv_data->rx_channel) =
1007 CCR_DMOD_LINEAR |
1008 CCR_SMOD_FIFO |
1009 CCR_DSIZ_32 | CCR_SSIZ_16 |
1010 CCR_REN;
1011 imx_dma_setup_single(
1012 drv_data->rx_channel,
1013 drv_data->rx_dma,
1014 drv_data->len,
1015 drv_data->rd_data_phys,
1016 DMA_MODE_READ);
1017 imx_dma_enable(drv_data->rx_channel);
1018
1019 /* Enable SPI interrupt */
1020 writel(SPI_INTEN_RO, regs + SPI_INT_STATUS);
1021
1022 /* Set SPI to request DMA service on both
1023 Rx and Tx half fifo watermark */
1024 writel(SPI_DMA_RHDEN | SPI_DMA_THDEN, regs + SPI_DMA);
1025 } else
1026 /* Write only access -> set SPI to request DMA
1027 service on Tx half fifo watermark */
1028 writel(SPI_DMA_THDEN, regs + SPI_DMA);
1029
1030 imx_dma_enable(drv_data->tx_channel);
1031 } else {
1032 dev_dbg(&drv_data->pdev->dev,
1033 "pump pio transfer\n"
1034 " tx = %p\n"
1035 " rx = %p\n"
1036 " len = %d\n",
1037 drv_data->tx,
1038 drv_data->rx,
1039 drv_data->len);
1040
1041 /* Ensure we have the correct interrupt handler */
1042 if (drv_data->rx)
1043 drv_data->transfer_handler = interrupt_transfer;
1044 else
1045 drv_data->transfer_handler = interrupt_wronly_transfer;
1046
1047 /* Enable SPI interrupt */
1048 if (drv_data->rx)
1049 writel(SPI_INTEN_TH | SPI_INTEN_RO,
1050 regs + SPI_INT_STATUS);
1051 else
1052 writel(SPI_INTEN_TH, regs + SPI_INT_STATUS);
1053 }
1054 }
1055
1056 static void pump_messages(struct work_struct *work)
1057 {
1058 struct driver_data *drv_data =
1059 container_of(work, struct driver_data, work);
1060 unsigned long flags;
1061
1062 /* Lock queue and check for queue work */
1063 spin_lock_irqsave(&drv_data->lock, flags);
1064 if (list_empty(&drv_data->queue) || drv_data->run == QUEUE_STOPPED) {
1065 drv_data->busy = 0;
1066 spin_unlock_irqrestore(&drv_data->lock, flags);
1067 return;
1068 }
1069
1070 /* Make sure we are not already running a message */
1071 if (drv_data->cur_msg) {
1072 spin_unlock_irqrestore(&drv_data->lock, flags);
1073 return;
1074 }
1075
1076 /* Extract head of queue */
1077 drv_data->cur_msg = list_entry(drv_data->queue.next,
1078 struct spi_message, queue);
1079 list_del_init(&drv_data->cur_msg->queue);
1080 drv_data->busy = 1;
1081 spin_unlock_irqrestore(&drv_data->lock, flags);
1082
1083 /* Initial message state */
1084 drv_data->cur_msg->state = START_STATE;
1085 drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
1086 struct spi_transfer,
1087 transfer_list);
1088
1089 /* Setup the SPI using the per chip configuration */
1090 drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
1091 restore_state(drv_data);
1092
1093 /* Mark as busy and launch transfers */
1094 tasklet_schedule(&drv_data->pump_transfers);
1095 }
1096
1097 static int transfer(struct spi_device *spi, struct spi_message *msg)
1098 {
1099 struct driver_data *drv_data = spi_master_get_devdata(spi->master);
1100 u32 min_speed_hz, max_speed_hz, tmp;
1101 struct spi_transfer *trans;
1102 unsigned long flags;
1103
1104 msg->actual_length = 0;
1105
1106 /* Per transfer setup check */
1107 min_speed_hz = spi_speed_hz(SPI_CONTROL_DATARATE_MIN);
1108 max_speed_hz = spi->max_speed_hz;
1109 list_for_each_entry(trans, &msg->transfers, transfer_list) {
1110 tmp = trans->bits_per_word;
1111 if (tmp > 16) {
1112 dev_err(&drv_data->pdev->dev,
1113 "message rejected : "
1114 "invalid transfer bits_per_word (%d bits)\n",
1115 tmp);
1116 goto msg_rejected;
1117 }
1118 tmp = trans->speed_hz;
1119 if (tmp) {
1120 if (tmp < min_speed_hz) {
1121 dev_err(&drv_data->pdev->dev,
1122 "message rejected : "
1123 "device min speed (%d Hz) exceeds "
1124 "required transfer speed (%d Hz)\n",
1125 min_speed_hz,
1126 tmp);
1127 goto msg_rejected;
1128 } else if (tmp > max_speed_hz) {
1129 dev_err(&drv_data->pdev->dev,
1130 "message rejected : "
1131 "transfer speed (%d Hz) exceeds "
1132 "device max speed (%d Hz)\n",
1133 tmp,
1134 max_speed_hz);
1135 goto msg_rejected;
1136 }
1137 }
1138 }
1139
1140 /* Message accepted */
1141 msg->status = -EINPROGRESS;
1142 msg->state = START_STATE;
1143
1144 spin_lock_irqsave(&drv_data->lock, flags);
1145 if (drv_data->run == QUEUE_STOPPED) {
1146 spin_unlock_irqrestore(&drv_data->lock, flags);
1147 return -ESHUTDOWN;
1148 }
1149
1150 list_add_tail(&msg->queue, &drv_data->queue);
1151 if (drv_data->run == QUEUE_RUNNING && !drv_data->busy)
1152 queue_work(drv_data->workqueue, &drv_data->work);
1153
1154 spin_unlock_irqrestore(&drv_data->lock, flags);
1155 return 0;
1156
1157 msg_rejected:
1158 /* Message rejected and not queued */
1159 msg->status = -EINVAL;
1160 msg->state = ERROR_STATE;
1161 if (msg->complete)
1162 msg->complete(msg->context);
1163 return -EINVAL;
1164 }
1165
1166 /* On first setup bad values must free chip_data memory since will cause
1167 spi_new_device to fail. Bad value setup from protocol driver are simply not
1168 applied and notified to the calling driver. */
1169 static int setup(struct spi_device *spi)
1170 {
1171 struct spi_imx_chip *chip_info;
1172 struct chip_data *chip;
1173 int first_setup = 0;
1174 u32 tmp;
1175 int status = 0;
1176
1177 /* Get controller data */
1178 chip_info = spi->controller_data;
1179
1180 /* Get controller_state */
1181 chip = spi_get_ctldata(spi);
1182 if (chip == NULL) {
1183 first_setup = 1;
1184
1185 chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
1186 if (!chip) {
1187 dev_err(&spi->dev,
1188 "setup - cannot allocate controller state");
1189 return -ENOMEM;
1190 }
1191 chip->control = SPI_DEFAULT_CONTROL;
1192
1193 if (chip_info == NULL) {
1194 /* spi_board_info.controller_data not is supplied */
1195 chip_info = kzalloc(sizeof(struct spi_imx_chip),
1196 GFP_KERNEL);
1197 if (!chip_info) {
1198 dev_err(&spi->dev,
1199 "setup - "
1200 "cannot allocate controller data");
1201 status = -ENOMEM;
1202 goto err_first_setup;
1203 }
1204 /* Set controller data default value */
1205 chip_info->enable_loopback =
1206 SPI_DEFAULT_ENABLE_LOOPBACK;
1207 chip_info->enable_dma = SPI_DEFAULT_ENABLE_DMA;
1208 chip_info->ins_ss_pulse = 1;
1209 chip_info->bclk_wait = SPI_DEFAULT_PERIOD_WAIT;
1210 chip_info->cs_control = null_cs_control;
1211 }
1212 }
1213
1214 /* Now set controller state based on controller data */
1215
1216 if (first_setup) {
1217 /* SPI loopback */
1218 if (chip_info->enable_loopback)
1219 chip->test = SPI_TEST_LBC;
1220 else
1221 chip->test = 0;
1222
1223 /* SPI dma driven */
1224 chip->enable_dma = chip_info->enable_dma;
1225
1226 /* SPI /SS pulse between spi burst */
1227 if (chip_info->ins_ss_pulse)
1228 u32_EDIT(chip->control,
1229 SPI_CONTROL_SSCTL, SPI_CONTROL_SSCTL_1);
1230 else
1231 u32_EDIT(chip->control,
1232 SPI_CONTROL_SSCTL, SPI_CONTROL_SSCTL_0);
1233
1234 /* SPI bclk waits between each bits_per_word spi burst */
1235 if (chip_info->bclk_wait > SPI_PERIOD_MAX_WAIT) {
1236 dev_err(&spi->dev,
1237 "setup - "
1238 "bclk_wait exceeds max allowed (%d)\n",
1239 SPI_PERIOD_MAX_WAIT);
1240 goto err_first_setup;
1241 }
1242 chip->period = SPI_PERIOD_CSRC_BCLK |
1243 (chip_info->bclk_wait & SPI_PERIOD_WAIT);
1244 }
1245
1246 /* SPI mode */
1247 tmp = spi->mode;
1248 if (tmp & SPI_LSB_FIRST) {
1249 status = -EINVAL;
1250 if (first_setup) {
1251 dev_err(&spi->dev,
1252 "setup - "
1253 "HW doesn't support LSB first transfer\n");
1254 goto err_first_setup;
1255 } else {
1256 dev_err(&spi->dev,
1257 "setup - "
1258 "HW doesn't support LSB first transfer, "
1259 "default to MSB first\n");
1260 spi->mode &= ~SPI_LSB_FIRST;
1261 }
1262 }
1263 if (tmp & SPI_CS_HIGH) {
1264 u32_EDIT(chip->control,
1265 SPI_CONTROL_SSPOL, SPI_CONTROL_SSPOL_ACT_HIGH);
1266 }
1267 switch (tmp & SPI_MODE_3) {
1268 case SPI_MODE_0:
1269 tmp = 0;
1270 break;
1271 case SPI_MODE_1:
1272 tmp = SPI_CONTROL_PHA_1;
1273 break;
1274 case SPI_MODE_2:
1275 tmp = SPI_CONTROL_POL_ACT_LOW;
1276 break;
1277 default:
1278 /* SPI_MODE_3 */
1279 tmp = SPI_CONTROL_PHA_1 | SPI_CONTROL_POL_ACT_LOW;
1280 break;
1281 }
1282 u32_EDIT(chip->control, SPI_CONTROL_POL | SPI_CONTROL_PHA, tmp);
1283
1284 /* SPI word width */
1285 tmp = spi->bits_per_word;
1286 if (tmp == 0) {
1287 tmp = 8;
1288 spi->bits_per_word = 8;
1289 } else if (tmp > 16) {
1290 status = -EINVAL;
1291 dev_err(&spi->dev,
1292 "setup - "
1293 "invalid bits_per_word (%d)\n",
1294 tmp);
1295 if (first_setup)
1296 goto err_first_setup;
1297 else {
1298 /* Undo setup using chip as backup copy */
1299 tmp = chip->bits_per_word;
1300 spi->bits_per_word = tmp;
1301 }
1302 }
1303 chip->bits_per_word = tmp;
1304 u32_EDIT(chip->control, SPI_CONTROL_BITCOUNT_MASK, tmp - 1);
1305 chip->n_bytes = (tmp <= 8) ? 1 : 2;
1306
1307 /* SPI datarate */
1308 tmp = spi_data_rate(spi->max_speed_hz);
1309 if (tmp == SPI_CONTROL_DATARATE_BAD) {
1310 status = -EINVAL;
1311 dev_err(&spi->dev,
1312 "setup - "
1313 "HW min speed (%d Hz) exceeds required "
1314 "max speed (%d Hz)\n",
1315 spi_speed_hz(SPI_CONTROL_DATARATE_MIN),
1316 spi->max_speed_hz);
1317 if (first_setup)
1318 goto err_first_setup;
1319 else
1320 /* Undo setup using chip as backup copy */
1321 spi->max_speed_hz = chip->max_speed_hz;
1322 } else {
1323 u32_EDIT(chip->control, SPI_CONTROL_DATARATE, tmp);
1324 /* Actual rounded max_speed_hz */
1325 tmp = spi_speed_hz(tmp);
1326 spi->max_speed_hz = tmp;
1327 chip->max_speed_hz = tmp;
1328 }
1329
1330 /* SPI chip-select management */
1331 if (chip_info->cs_control)
1332 chip->cs_control = chip_info->cs_control;
1333 else
1334 chip->cs_control = null_cs_control;
1335
1336 /* Save controller_state */
1337 spi_set_ctldata(spi, chip);
1338
1339 /* Summary */
1340 dev_dbg(&spi->dev,
1341 "setup succeded\n"
1342 " loopback enable = %s\n"
1343 " dma enable = %s\n"
1344 " insert /ss pulse = %s\n"
1345 " period wait = %d\n"
1346 " mode = %d\n"
1347 " bits per word = %d\n"
1348 " min speed = %d Hz\n"
1349 " rounded max speed = %d Hz\n",
1350 chip->test & SPI_TEST_LBC ? "Yes" : "No",
1351 chip->enable_dma ? "Yes" : "No",
1352 chip->control & SPI_CONTROL_SSCTL ? "Yes" : "No",
1353 chip->period & SPI_PERIOD_WAIT,
1354 spi->mode,
1355 spi->bits_per_word,
1356 spi_speed_hz(SPI_CONTROL_DATARATE_MIN),
1357 spi->max_speed_hz);
1358 return status;
1359
1360 err_first_setup:
1361 kfree(chip);
1362 return status;
1363 }
1364
1365 static void cleanup(struct spi_device *spi)
1366 {
1367 kfree(spi_get_ctldata(spi));
1368 }
1369
1370 static int init_queue(struct driver_data *drv_data)
1371 {
1372 INIT_LIST_HEAD(&drv_data->queue);
1373 spin_lock_init(&drv_data->lock);
1374
1375 drv_data->run = QUEUE_STOPPED;
1376 drv_data->busy = 0;
1377
1378 tasklet_init(&drv_data->pump_transfers,
1379 pump_transfers, (unsigned long)drv_data);
1380
1381 INIT_WORK(&drv_data->work, pump_messages);
1382 drv_data->workqueue = create_singlethread_workqueue(
1383 drv_data->master->cdev.dev->bus_id);
1384 if (drv_data->workqueue == NULL)
1385 return -EBUSY;
1386
1387 return 0;
1388 }
1389
1390 static int start_queue(struct driver_data *drv_data)
1391 {
1392 unsigned long flags;
1393
1394 spin_lock_irqsave(&drv_data->lock, flags);
1395
1396 if (drv_data->run == QUEUE_RUNNING || drv_data->busy) {
1397 spin_unlock_irqrestore(&drv_data->lock, flags);
1398 return -EBUSY;
1399 }
1400
1401 drv_data->run = QUEUE_RUNNING;
1402 drv_data->cur_msg = NULL;
1403 drv_data->cur_transfer = NULL;
1404 drv_data->cur_chip = NULL;
1405 spin_unlock_irqrestore(&drv_data->lock, flags);
1406
1407 queue_work(drv_data->workqueue, &drv_data->work);
1408
1409 return 0;
1410 }
1411
1412 static int stop_queue(struct driver_data *drv_data)
1413 {
1414 unsigned long flags;
1415 unsigned limit = 500;
1416 int status = 0;
1417
1418 spin_lock_irqsave(&drv_data->lock, flags);
1419
1420 /* This is a bit lame, but is optimized for the common execution path.
1421 * A wait_queue on the drv_data->busy could be used, but then the common
1422 * execution path (pump_messages) would be required to call wake_up or
1423 * friends on every SPI message. Do this instead */
1424 drv_data->run = QUEUE_STOPPED;
1425 while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) {
1426 spin_unlock_irqrestore(&drv_data->lock, flags);
1427 msleep(10);
1428 spin_lock_irqsave(&drv_data->lock, flags);
1429 }
1430
1431 if (!list_empty(&drv_data->queue) || drv_data->busy)
1432 status = -EBUSY;
1433
1434 spin_unlock_irqrestore(&drv_data->lock, flags);
1435
1436 return status;
1437 }
1438
1439 static int destroy_queue(struct driver_data *drv_data)
1440 {
1441 int status;
1442
1443 status = stop_queue(drv_data);
1444 if (status != 0)
1445 return status;
1446
1447 if (drv_data->workqueue)
1448 destroy_workqueue(drv_data->workqueue);
1449
1450 return 0;
1451 }
1452
1453 static int spi_imx_probe(struct platform_device *pdev)
1454 {
1455 struct device *dev = &pdev->dev;
1456 struct spi_imx_master *platform_info;
1457 struct spi_master *master;
1458 struct driver_data *drv_data = NULL;
1459 struct resource *res;
1460 int irq, status = 0;
1461
1462 platform_info = dev->platform_data;
1463 if (platform_info == NULL) {
1464 dev_err(&pdev->dev, "probe - no platform data supplied\n");
1465 status = -ENODEV;
1466 goto err_no_pdata;
1467 }
1468
1469 /* Allocate master with space for drv_data */
1470 master = spi_alloc_master(dev, sizeof(struct driver_data));
1471 if (!master) {
1472 dev_err(&pdev->dev, "probe - cannot alloc spi_master\n");
1473 status = -ENOMEM;
1474 goto err_no_mem;
1475 }
1476 drv_data = spi_master_get_devdata(master);
1477 drv_data->master = master;
1478 drv_data->master_info = platform_info;
1479 drv_data->pdev = pdev;
1480
1481 master->bus_num = pdev->id;
1482 master->num_chipselect = platform_info->num_chipselect;
1483 master->cleanup = cleanup;
1484 master->setup = setup;
1485 master->transfer = transfer;
1486
1487 drv_data->dummy_dma_buf = SPI_DUMMY_u32;
1488
1489 /* Find and map resources */
1490 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1491 if (!res) {
1492 dev_err(&pdev->dev, "probe - MEM resources not defined\n");
1493 status = -ENODEV;
1494 goto err_no_iores;
1495 }
1496 drv_data->ioarea = request_mem_region(res->start,
1497 res->end - res->start + 1,
1498 pdev->name);
1499 if (drv_data->ioarea == NULL) {
1500 dev_err(&pdev->dev, "probe - cannot reserve region\n");
1501 status = -ENXIO;
1502 goto err_no_iores;
1503 }
1504 drv_data->regs = ioremap(res->start, res->end - res->start + 1);
1505 if (drv_data->regs == NULL) {
1506 dev_err(&pdev->dev, "probe - cannot map IO\n");
1507 status = -ENXIO;
1508 goto err_no_iomap;
1509 }
1510 drv_data->rd_data_phys = (dma_addr_t)res->start;
1511
1512 /* Attach to IRQ */
1513 irq = platform_get_irq(pdev, 0);
1514 if (irq < 0) {
1515 dev_err(&pdev->dev, "probe - IRQ resource not defined\n");
1516 status = -ENODEV;
1517 goto err_no_irqres;
1518 }
1519 status = request_irq(irq, spi_int, IRQF_DISABLED, dev->bus_id, drv_data);
1520 if (status < 0) {
1521 dev_err(&pdev->dev, "probe - cannot get IRQ (%d)\n", status);
1522 goto err_no_irqres;
1523 }
1524
1525 /* Setup DMA if requested */
1526 drv_data->tx_channel = -1;
1527 drv_data->rx_channel = -1;
1528 if (platform_info->enable_dma) {
1529 /* Get rx DMA channel */
1530 status = imx_dma_request_by_prio(&drv_data->rx_channel,
1531 "spi_imx_rx", DMA_PRIO_HIGH);
1532 if (status < 0) {
1533 dev_err(dev,
1534 "probe - problem (%d) requesting rx channel\n",
1535 status);
1536 goto err_no_rxdma;
1537 } else
1538 imx_dma_setup_handlers(drv_data->rx_channel, NULL,
1539 dma_err_handler, drv_data);
1540
1541 /* Get tx DMA channel */
1542 status = imx_dma_request_by_prio(&drv_data->tx_channel,
1543 "spi_imx_tx", DMA_PRIO_MEDIUM);
1544 if (status < 0) {
1545 dev_err(dev,
1546 "probe - problem (%d) requesting tx channel\n",
1547 status);
1548 imx_dma_free(drv_data->rx_channel);
1549 goto err_no_txdma;
1550 } else
1551 imx_dma_setup_handlers(drv_data->tx_channel,
1552 dma_tx_handler, dma_err_handler,
1553 drv_data);
1554
1555 /* Set request source and burst length for allocated channels */
1556 switch (drv_data->pdev->id) {
1557 case 1:
1558 /* Using SPI1 */
1559 RSSR(drv_data->rx_channel) = DMA_REQ_SPI1_R;
1560 RSSR(drv_data->tx_channel) = DMA_REQ_SPI1_T;
1561 break;
1562 case 2:
1563 /* Using SPI2 */
1564 RSSR(drv_data->rx_channel) = DMA_REQ_SPI2_R;
1565 RSSR(drv_data->tx_channel) = DMA_REQ_SPI2_T;
1566 break;
1567 default:
1568 dev_err(dev, "probe - bad SPI Id\n");
1569 imx_dma_free(drv_data->rx_channel);
1570 imx_dma_free(drv_data->tx_channel);
1571 status = -ENODEV;
1572 goto err_no_devid;
1573 }
1574 BLR(drv_data->rx_channel) = SPI_DMA_BLR;
1575 BLR(drv_data->tx_channel) = SPI_DMA_BLR;
1576 }
1577
1578 /* Load default SPI configuration */
1579 writel(SPI_RESET_START, drv_data->regs + SPI_RESET);
1580 writel(0, drv_data->regs + SPI_RESET);
1581 writel(SPI_DEFAULT_CONTROL, drv_data->regs + SPI_CONTROL);
1582
1583 /* Initial and start queue */
1584 status = init_queue(drv_data);
1585 if (status != 0) {
1586 dev_err(&pdev->dev, "probe - problem initializing queue\n");
1587 goto err_init_queue;
1588 }
1589 status = start_queue(drv_data);
1590 if (status != 0) {
1591 dev_err(&pdev->dev, "probe - problem starting queue\n");
1592 goto err_start_queue;
1593 }
1594
1595 /* Register with the SPI framework */
1596 platform_set_drvdata(pdev, drv_data);
1597 status = spi_register_master(master);
1598 if (status != 0) {
1599 dev_err(&pdev->dev, "probe - problem registering spi master\n");
1600 goto err_spi_register;
1601 }
1602
1603 dev_dbg(dev, "probe succeded\n");
1604 return 0;
1605
1606 err_init_queue:
1607 err_start_queue:
1608 err_spi_register:
1609 destroy_queue(drv_data);
1610
1611 err_no_rxdma:
1612 err_no_txdma:
1613 err_no_devid:
1614 free_irq(irq, drv_data);
1615
1616 err_no_irqres:
1617 iounmap(drv_data->regs);
1618
1619 err_no_iomap:
1620 release_resource(drv_data->ioarea);
1621 kfree(drv_data->ioarea);
1622
1623 err_no_iores:
1624 spi_master_put(master);
1625
1626 err_no_pdata:
1627 err_no_mem:
1628 return status;
1629 }
1630
1631 static int __devexit spi_imx_remove(struct platform_device *pdev)
1632 {
1633 struct driver_data *drv_data = platform_get_drvdata(pdev);
1634 int irq;
1635 int status = 0;
1636
1637 if (!drv_data)
1638 return 0;
1639
1640 tasklet_kill(&drv_data->pump_transfers);
1641
1642 /* Remove the queue */
1643 status = destroy_queue(drv_data);
1644 if (status != 0) {
1645 dev_err(&pdev->dev, "queue remove failed (%d)\n", status);
1646 return status;
1647 }
1648
1649 /* Reset SPI */
1650 writel(SPI_RESET_START, drv_data->regs + SPI_RESET);
1651 writel(0, drv_data->regs + SPI_RESET);
1652
1653 /* Release DMA */
1654 if (drv_data->master_info->enable_dma) {
1655 RSSR(drv_data->rx_channel) = 0;
1656 RSSR(drv_data->tx_channel) = 0;
1657 imx_dma_free(drv_data->tx_channel);
1658 imx_dma_free(drv_data->rx_channel);
1659 }
1660
1661 /* Release IRQ */
1662 irq = platform_get_irq(pdev, 0);
1663 if (irq >= 0)
1664 free_irq(irq, drv_data);
1665
1666 /* Release map resources */
1667 iounmap(drv_data->regs);
1668 release_resource(drv_data->ioarea);
1669 kfree(drv_data->ioarea);
1670
1671 /* Disconnect from the SPI framework */
1672 spi_unregister_master(drv_data->master);
1673 spi_master_put(drv_data->master);
1674
1675 /* Prevent double remove */
1676 platform_set_drvdata(pdev, NULL);
1677
1678 dev_dbg(&pdev->dev, "remove succeded\n");
1679
1680 return 0;
1681 }
1682
1683 static void spi_imx_shutdown(struct platform_device *pdev)
1684 {
1685 struct driver_data *drv_data = platform_get_drvdata(pdev);
1686
1687 /* Reset SPI */
1688 writel(SPI_RESET_START, drv_data->regs + SPI_RESET);
1689 writel(0, drv_data->regs + SPI_RESET);
1690
1691 dev_dbg(&pdev->dev, "shutdown succeded\n");
1692 }
1693
1694 #ifdef CONFIG_PM
1695 static int suspend_devices(struct device *dev, void *pm_message)
1696 {
1697 pm_message_t *state = pm_message;
1698
1699 if (dev->power.power_state.event != state->event) {
1700 dev_warn(dev, "pm state does not match request\n");
1701 return -1;
1702 }
1703
1704 return 0;
1705 }
1706
1707 static int spi_imx_suspend(struct platform_device *pdev, pm_message_t state)
1708 {
1709 struct driver_data *drv_data = platform_get_drvdata(pdev);
1710 int status = 0;
1711
1712 status = stop_queue(drv_data);
1713 if (status != 0) {
1714 dev_warn(&pdev->dev, "suspend cannot stop queue\n");
1715 return status;
1716 }
1717
1718 dev_dbg(&pdev->dev, "suspended\n");
1719
1720 return 0;
1721 }
1722
1723 static int spi_imx_resume(struct platform_device *pdev)
1724 {
1725 struct driver_data *drv_data = platform_get_drvdata(pdev);
1726 int status = 0;
1727
1728 /* Start the queue running */
1729 status = start_queue(drv_data);
1730 if (status != 0)
1731 dev_err(&pdev->dev, "problem starting queue (%d)\n", status);
1732 else
1733 dev_dbg(&pdev->dev, "resumed\n");
1734
1735 return status;
1736 }
1737 #else
1738 #define spi_imx_suspend NULL
1739 #define spi_imx_resume NULL
1740 #endif /* CONFIG_PM */
1741
1742 static struct platform_driver driver = {
1743 .driver = {
1744 .name = "imx-spi",
1745 .bus = &platform_bus_type,
1746 .owner = THIS_MODULE,
1747 },
1748 .probe = spi_imx_probe,
1749 .remove = __devexit_p(spi_imx_remove),
1750 .shutdown = spi_imx_shutdown,
1751 .suspend = spi_imx_suspend,
1752 .resume = spi_imx_resume,
1753 };
1754
1755 static int __init spi_imx_init(void)
1756 {
1757 return platform_driver_register(&driver);
1758 }
1759 module_init(spi_imx_init);
1760
1761 static void __exit spi_imx_exit(void)
1762 {
1763 platform_driver_unregister(&driver);
1764 }
1765 module_exit(spi_imx_exit);
1766
1767 MODULE_AUTHOR("Andrea Paterniani, <a.paterniani@swapp-eng.it>");
1768 MODULE_DESCRIPTION("iMX SPI Contoller Driver");
1769 MODULE_LICENSE("GPL");
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree