1 /*======================================================================
3 A driver for PCMCIA IDE/ATA disk cards
5 ide-cs.c 1.3 2002/10/26 05:45:31
7 The contents of this file are subject to the Mozilla Public
8 License Version 1.1 (the "License"); you may not use this file
9 except in compliance with the License. You may obtain a copy of
10 the License at http://www.mozilla.org/MPL/
12 Software distributed under the License is distributed on an "AS
13 IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
14 implied. See the License for the specific language governing
15 rights and limitations under the License.
17 The initial developer of the original code is David A. Hinds
18 <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
19 are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
21 Alternatively, the contents of this file may be used under the
22 terms of the GNU General Public License version 2 (the "GPL"), in
23 which case the provisions of the GPL are applicable instead of the
24 above. If you wish to allow the use of your version of this file
25 only under the terms of the GPL and not to allow others to use
26 your version of this file under the MPL, indicate your decision
27 by deleting the provisions above and replace them with the notice
28 and other provisions required by the GPL. If you do not delete
29 the provisions above, a recipient may use your version of this
30 file under either the MPL or the GPL.
32 ======================================================================*/
34 #include <linux/module.h>
35 #include <linux/kernel.h>
36 #include <linux/init.h>
37 #include <linux/sched.h>
38 #include <linux/ptrace.h>
39 #include <linux/slab.h>
40 #include <linux/string.h>
41 #include <linux/timer.h>
42 #include <linux/ioport.h>
43 #include <linux/ide.h>
44 #include <linux/hdreg.h>
45 #include <linux/major.h>
47 #include <asm/system.h>
49 #include <pcmcia/cs_types.h>
50 #include <pcmcia/cs.h>
51 #include <pcmcia/cistpl.h>
52 #include <pcmcia/ds.h>
53 #include <pcmcia/cisreg.h>
54 #include <pcmcia/ciscode.h>
56 /*====================================================================*/
58 /* Module parameters */
60 MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
61 MODULE_DESCRIPTION("PCMCIA ATA/IDE card driver");
62 MODULE_LICENSE("Dual MPL/GPL");
64 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
67 INT_MODULE_PARM(pc_debug
, PCMCIA_DEBUG
);
68 #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
69 static char *version
=
70 "ide-cs.c 1.3 2002/10/26 05:45:31 (David Hinds)";
72 #define DEBUG(n, args...)
75 /*====================================================================*/
77 static const char ide_major
[] = {
78 IDE0_MAJOR
, IDE1_MAJOR
, IDE2_MAJOR
, IDE3_MAJOR
,
79 IDE4_MAJOR
, IDE5_MAJOR
82 typedef struct ide_info_t
{
89 static void ide_release(dev_link_t
*);
90 static int ide_event(event_t event
, int priority
,
91 event_callback_args_t
*args
);
93 static dev_info_t dev_info
= "ide-cs";
95 static dev_link_t
*ide_attach(void);
96 static void ide_detach(dev_link_t
*);
98 static dev_link_t
*dev_list
= NULL
;
100 /*======================================================================
102 ide_attach() creates an "instance" of the driver, allocating
103 local data structures for one device. The device is registered
106 ======================================================================*/
108 static dev_link_t
*ide_attach(void)
112 client_reg_t client_reg
;
115 DEBUG(0, "ide_attach()\n");
117 /* Create new ide device */
118 info
= kmalloc(sizeof(*info
), GFP_KERNEL
);
119 if (!info
) return NULL
;
120 memset(info
, 0, sizeof(*info
));
121 link
= &info
->link
; link
->priv
= info
;
123 link
->io
.Attributes1
= IO_DATA_PATH_WIDTH_AUTO
;
124 link
->io
.Attributes2
= IO_DATA_PATH_WIDTH_8
;
125 link
->io
.IOAddrLines
= 3;
126 link
->irq
.Attributes
= IRQ_TYPE_EXCLUSIVE
;
127 link
->irq
.IRQInfo1
= IRQ_LEVEL_ID
;
128 link
->conf
.Attributes
= CONF_ENABLE_IRQ
;
130 link
->conf
.IntType
= INT_MEMORY_AND_IO
;
132 /* Register with Card Services */
133 link
->next
= dev_list
;
135 client_reg
.dev_info
= &dev_info
;
136 client_reg
.Version
= 0x0210;
137 client_reg
.event_callback_args
.client_data
= link
;
138 ret
= pcmcia_register_client(&link
->handle
, &client_reg
);
139 if (ret
!= CS_SUCCESS
) {
140 cs_error(link
->handle
, RegisterClient
, ret
);
148 /*======================================================================
150 This deletes a driver "instance". The device is de-registered
151 with Card Services. If it has been released, all local data
152 structures are freed. Otherwise, the structures will be freed
153 when the device is released.
155 ======================================================================*/
157 static void ide_detach(dev_link_t
*link
)
162 DEBUG(0, "ide_detach(0x%p)\n", link
);
164 /* Locate device structure */
165 for (linkp
= &dev_list
; *linkp
; linkp
= &(*linkp
)->next
)
166 if (*linkp
== link
) break;
170 if (link
->state
& DEV_CONFIG
)
174 ret
= pcmcia_deregister_client(link
->handle
);
175 if (ret
!= CS_SUCCESS
)
176 cs_error(link
->handle
, DeregisterClient
, ret
);
179 /* Unlink, free device structure */
185 static int idecs_register(unsigned long io
, unsigned long ctl
, unsigned long irq
)
188 memset(&hw
, 0, sizeof(hw
));
189 ide_init_hwif_ports(&hw
, io
, ctl
, NULL
);
191 hw
.chipset
= ide_pci
;
192 return ide_register_hw_with_fixup(&hw
, NULL
, ide_undecoded_slave
);
195 /*======================================================================
197 ide_config() is scheduled to run after a CARD_INSERTION event
198 is received, to configure the PCMCIA socket, and to make the
199 ide device available to the system.
201 ======================================================================*/
203 #define CS_CHECK(fn, ret) \
204 do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
206 static void ide_config(dev_link_t
*link
)
208 client_handle_t handle
= link
->handle
;
209 ide_info_t
*info
= link
->priv
;
215 cistpl_cftable_entry_t dflt
;
217 cistpl_cftable_entry_t
*cfg
;
218 int i
, pass
, last_ret
= 0, last_fn
= 0, hd
, is_kme
= 0;
219 unsigned long io_base
, ctl_base
;
221 DEBUG(0, "ide_config(0x%p)\n", link
);
223 stk
= kmalloc(sizeof(*stk
), GFP_KERNEL
);
224 if (!stk
) goto err_mem
;
225 memset(stk
, 0, sizeof(*stk
));
226 cfg
= &stk
->parse
.cftable_entry
;
228 tuple
.TupleData
= (cisdata_t
*)&stk
->buf
;
229 tuple
.TupleOffset
= 0;
230 tuple
.TupleDataMax
= 255;
231 tuple
.Attributes
= 0;
232 tuple
.DesiredTuple
= CISTPL_CONFIG
;
233 CS_CHECK(GetFirstTuple
, pcmcia_get_first_tuple(handle
, &tuple
));
234 CS_CHECK(GetTupleData
, pcmcia_get_tuple_data(handle
, &tuple
));
235 CS_CHECK(ParseTuple
, pcmcia_parse_tuple(handle
, &tuple
, &stk
->parse
));
236 link
->conf
.ConfigBase
= stk
->parse
.config
.base
;
237 link
->conf
.Present
= stk
->parse
.config
.rmask
[0];
239 tuple
.DesiredTuple
= CISTPL_MANFID
;
240 if (!pcmcia_get_first_tuple(handle
, &tuple
) &&
241 !pcmcia_get_tuple_data(handle
, &tuple
) &&
242 !pcmcia_parse_tuple(handle
, &tuple
, &stk
->parse
))
243 is_kme
= ((stk
->parse
.manfid
.manf
== MANFID_KME
) &&
244 ((stk
->parse
.manfid
.card
== PRODID_KME_KXLC005_A
) ||
245 (stk
->parse
.manfid
.card
== PRODID_KME_KXLC005_B
)));
248 link
->state
|= DEV_CONFIG
;
250 /* Not sure if this is right... look up the current Vcc */
251 CS_CHECK(GetConfigurationInfo
, pcmcia_get_configuration_info(handle
, &stk
->conf
));
252 link
->conf
.Vcc
= stk
->conf
.Vcc
;
254 pass
= io_base
= ctl_base
= 0;
255 tuple
.DesiredTuple
= CISTPL_CFTABLE_ENTRY
;
256 tuple
.Attributes
= 0;
257 CS_CHECK(GetFirstTuple
, pcmcia_get_first_tuple(handle
, &tuple
));
259 if (pcmcia_get_tuple_data(handle
, &tuple
) != 0) goto next_entry
;
260 if (pcmcia_parse_tuple(handle
, &tuple
, &stk
->parse
) != 0) goto next_entry
;
262 /* Check for matching Vcc, unless we're desperate */
264 if (cfg
->vcc
.present
& (1 << CISTPL_POWER_VNOM
)) {
265 if (stk
->conf
.Vcc
!= cfg
->vcc
.param
[CISTPL_POWER_VNOM
] / 10000)
267 } else if (stk
->dflt
.vcc
.present
& (1 << CISTPL_POWER_VNOM
)) {
268 if (stk
->conf
.Vcc
!= stk
->dflt
.vcc
.param
[CISTPL_POWER_VNOM
] / 10000)
273 if (cfg
->vpp1
.present
& (1 << CISTPL_POWER_VNOM
))
274 link
->conf
.Vpp1
= link
->conf
.Vpp2
=
275 cfg
->vpp1
.param
[CISTPL_POWER_VNOM
] / 10000;
276 else if (stk
->dflt
.vpp1
.present
& (1 << CISTPL_POWER_VNOM
))
277 link
->conf
.Vpp1
= link
->conf
.Vpp2
=
278 stk
->dflt
.vpp1
.param
[CISTPL_POWER_VNOM
] / 10000;
280 if ((cfg
->io
.nwin
> 0) || (stk
->dflt
.io
.nwin
> 0)) {
281 cistpl_io_t
*io
= (cfg
->io
.nwin
) ? &cfg
->io
: &stk
->dflt
.io
;
282 link
->conf
.ConfigIndex
= cfg
->index
;
283 link
->io
.BasePort1
= io
->win
[0].base
;
284 link
->io
.IOAddrLines
= io
->flags
& CISTPL_IO_LINES_MASK
;
285 if (!(io
->flags
& CISTPL_IO_16BIT
))
286 link
->io
.Attributes1
= IO_DATA_PATH_WIDTH_8
;
288 link
->io
.NumPorts1
= 8;
289 link
->io
.BasePort2
= io
->win
[1].base
;
290 link
->io
.NumPorts2
= (is_kme
) ? 2 : 1;
291 if (pcmcia_request_io(link
->handle
, &link
->io
) != 0)
293 io_base
= link
->io
.BasePort1
;
294 ctl_base
= link
->io
.BasePort2
;
295 } else if ((io
->nwin
== 1) && (io
->win
[0].len
>= 16)) {
296 link
->io
.NumPorts1
= io
->win
[0].len
;
297 link
->io
.NumPorts2
= 0;
298 if (pcmcia_request_io(link
->handle
, &link
->io
) != 0)
300 io_base
= link
->io
.BasePort1
;
301 ctl_base
= link
->io
.BasePort1
+ 0x0e;
302 } else goto next_entry
;
303 /* If we've got this far, we're done */
308 if (cfg
->flags
& CISTPL_CFTABLE_DEFAULT
)
309 memcpy(&stk
->dflt
, cfg
, sizeof(stk
->dflt
));
311 CS_CHECK(GetNextTuple
, pcmcia_get_next_tuple(handle
, &tuple
));
312 } else if (pcmcia_get_next_tuple(handle
, &tuple
) != 0) {
313 CS_CHECK(GetFirstTuple
, pcmcia_get_first_tuple(handle
, &tuple
));
314 memset(&stk
->dflt
, 0, sizeof(stk
->dflt
));
319 CS_CHECK(RequestIRQ
, pcmcia_request_irq(handle
, &link
->irq
));
320 CS_CHECK(RequestConfiguration
, pcmcia_request_configuration(handle
, &link
->conf
));
322 /* disable drive interrupts during IDE probe */
323 outb(0x02, ctl_base
);
325 /* special setup for KXLC005 card */
327 outb(0x81, ctl_base
+1);
329 /* retry registration in case device is still spinning up */
330 for (hd
= -1, i
= 0; i
< 10; i
++) {
331 hd
= idecs_register(io_base
, ctl_base
, link
->irq
.AssignedIRQ
);
333 if (link
->io
.NumPorts1
== 0x20) {
334 outb(0x02, ctl_base
+ 0x10);
335 hd
= idecs_register(io_base
+ 0x10, ctl_base
+ 0x10,
336 link
->irq
.AssignedIRQ
);
343 __set_current_state(TASK_UNINTERRUPTIBLE
);
344 schedule_timeout(HZ
/10);
348 printk(KERN_NOTICE
"ide-cs: ide_register() at 0x%3lx & 0x%3lx"
349 ", irq %u failed\n", io_base
, ctl_base
,
350 link
->irq
.AssignedIRQ
);
355 sprintf(info
->node
.dev_name
, "hd%c", 'a' + (hd
* 2));
356 info
->node
.major
= ide_major
[hd
];
357 info
->node
.minor
= 0;
359 link
->dev
= &info
->node
;
360 printk(KERN_INFO
"ide-cs: %s: Vcc = %d.%d, Vpp = %d.%d\n",
361 info
->node
.dev_name
, link
->conf
.Vcc
/ 10, link
->conf
.Vcc
% 10,
362 link
->conf
.Vpp1
/ 10, link
->conf
.Vpp1
% 10);
364 link
->state
&= ~DEV_CONFIG_PENDING
;
369 printk(KERN_NOTICE
"ide-cs: ide_config failed memory allocation\n");
373 cs_error(link
->handle
, last_fn
, last_ret
);
377 link
->state
&= ~DEV_CONFIG_PENDING
;
380 /*======================================================================
382 After a card is removed, ide_release() will unregister the net
383 device, and release the PCMCIA configuration. If the device is
384 still open, this will be postponed until it is closed.
386 ======================================================================*/
388 void ide_release(dev_link_t
*link
)
390 ide_info_t
*info
= link
->priv
;
392 DEBUG(0, "ide_release(0x%p)\n", link
);
395 /* FIXME: if this fails we need to queue the cleanup somehow
396 -- need to investigate the required PCMCIA magic */
397 ide_unregister(info
->hd
);
402 pcmcia_release_configuration(link
->handle
);
403 pcmcia_release_io(link
->handle
, &link
->io
);
404 pcmcia_release_irq(link
->handle
, &link
->irq
);
406 link
->state
&= ~DEV_CONFIG
;
410 /*======================================================================
412 The card status event handler. Mostly, this schedules other
413 stuff to run after an event is received. A CARD_REMOVAL event
414 also sets some flags to discourage the ide drivers from
415 talking to the ports.
417 ======================================================================*/
419 int ide_event(event_t event
, int priority
,
420 event_callback_args_t
*args
)
422 dev_link_t
*link
= args
->client_data
;
424 DEBUG(1, "ide_event(0x%06x)\n", event
);
427 case CS_EVENT_CARD_REMOVAL
:
428 link
->state
&= ~DEV_PRESENT
;
429 if (link
->state
& DEV_CONFIG
)
432 case CS_EVENT_CARD_INSERTION
:
433 link
->state
|= DEV_PRESENT
| DEV_CONFIG_PENDING
;
436 case CS_EVENT_PM_SUSPEND
:
437 link
->state
|= DEV_SUSPEND
;
438 /* Fall through... */
439 case CS_EVENT_RESET_PHYSICAL
:
440 if (link
->state
& DEV_CONFIG
)
441 pcmcia_release_configuration(link
->handle
);
443 case CS_EVENT_PM_RESUME
:
444 link
->state
&= ~DEV_SUSPEND
;
445 /* Fall through... */
446 case CS_EVENT_CARD_RESET
:
448 pcmcia_request_configuration(link
->handle
, &link
->conf
);
454 static struct pcmcia_device_id ide_ids
[] = {
455 PCMCIA_DEVICE_FUNC_ID(4),
456 PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
457 PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
458 PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001),
459 PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401),
460 PCMCIA_DEVICE_PROD_ID123("Caravelle", "PSC-IDE ", "PSC000", 0x8c36137c, 0xd0693ab8, 0x2768a9f0),
461 PCMCIA_DEVICE_PROD_ID123("CDROM", "IDE", "MCD-601p", 0x1b9179ca, 0xede88951, 0x0d902f74),
462 PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),
463 PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591),
464 PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728),
465 PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591),
466 PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4),
467 PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde),
468 PCMCIA_DEVICE_PROD_ID12("EXP", "CD+GAME", 0x6f58c983, 0x63c13aaf),
469 PCMCIA_DEVICE_PROD_ID12("EXP ", "CD-ROM", 0x0a5c52fd, 0x66536591),
470 PCMCIA_DEVICE_PROD_ID12("EXP ", "PnPIDE", 0x0a5c52fd, 0x0c694728),
471 PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e),
472 PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
473 PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b),
474 PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
475 PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),
476 PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b),
477 PCMCIA_DEVICE_PROD_ID12(" ", "NinjaATA-", 0x3b6e20c8, 0xebe0bd79),
478 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591),
479 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728),
480 PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1),
481 PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
482 PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
483 PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
484 PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6),
487 MODULE_DEVICE_TABLE(pcmcia
, ide_ids
);
489 static struct pcmcia_driver ide_cs_driver
= {
490 .owner
= THIS_MODULE
,
494 .attach
= ide_attach
,
496 .detach
= ide_detach
,
500 static int __init
init_ide_cs(void)
502 return pcmcia_register_driver(&ide_cs_driver
);
505 static void __exit
exit_ide_cs(void)
507 pcmcia_unregister_driver(&ide_cs_driver
);
508 BUG_ON(dev_list
!= NULL
);
511 module_init(init_ide_cs
);
512 module_exit(exit_ide_cs
);