2 * BSS client mode implementation
3 * Copyright 2003-2008, Jouni Malinen <j@w1.fi>
4 * Copyright 2004, Instant802 Networks, Inc.
5 * Copyright 2005, Devicescape Software, Inc.
6 * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
7 * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
14 #include <linux/delay.h>
15 #include <linux/if_ether.h>
16 #include <linux/skbuff.h>
17 #include <linux/if_arp.h>
18 #include <linux/etherdevice.h>
19 #include <linux/rtnetlink.h>
20 #include <linux/pm_qos_params.h>
21 #include <linux/crc32.h>
22 #include <net/mac80211.h>
23 #include <asm/unaligned.h>
25 #include "ieee80211_i.h"
26 #include "driver-ops.h"
30 #define IEEE80211_AUTH_TIMEOUT (HZ / 5)
31 #define IEEE80211_AUTH_MAX_TRIES 3
32 #define IEEE80211_ASSOC_TIMEOUT (HZ / 5)
33 #define IEEE80211_ASSOC_MAX_TRIES 3
34 #define IEEE80211_MAX_PROBE_TRIES 5
37 * beacon loss detection timeout
38 * XXX: should depend on beacon interval
40 #define IEEE80211_BEACON_LOSS_TIME (2 * HZ)
42 * Time the connection can be idle before we probe
43 * it to see if we can still talk to the AP.
45 #define IEEE80211_CONNECTION_IDLE_TIME (30 * HZ)
47 * Time we wait for a probe response after sending
48 * a probe request because of beacon loss or for
49 * checking the connection still works.
51 #define IEEE80211_PROBE_WAIT (HZ / 2)
53 #define TMR_RUNNING_TIMER 0
54 #define TMR_RUNNING_CHANSW 1
57 * All cfg80211 functions have to be called outside a locked
58 * section so that they can acquire a lock themselves... This
59 * is much simpler than queuing up things in cfg80211, but we
60 * do need some indirection for that here.
63 /* no action required */
66 /* caller must call cfg80211_send_rx_auth() */
67 RX_MGMT_CFG80211_AUTH
,
69 /* caller must call cfg80211_send_rx_assoc() */
70 RX_MGMT_CFG80211_ASSOC
,
72 /* caller must call cfg80211_send_deauth() */
73 RX_MGMT_CFG80211_DEAUTH
,
75 /* caller must call cfg80211_send_disassoc() */
76 RX_MGMT_CFG80211_DISASSOC
,
78 /* caller must tell cfg80211 about internal error */
79 RX_MGMT_CFG80211_ASSOC_ERROR
,
83 static inline void ASSERT_MGD_MTX(struct ieee80211_if_managed
*ifmgd
)
85 WARN_ON(!mutex_is_locked(&ifmgd
->mtx
));
89 * We can have multiple work items (and connection probing)
90 * scheduling this timer, but we need to take care to only
91 * reschedule it when it should fire _earlier_ than it was
92 * asked for before, or if it's not pending right now. This
93 * function ensures that. Note that it then is required to
94 * run this function for all timeouts after the first one
95 * has happened -- the work that runs from this timer will
98 static void run_again(struct ieee80211_if_managed
*ifmgd
,
99 unsigned long timeout
)
101 ASSERT_MGD_MTX(ifmgd
);
103 if (!timer_pending(&ifmgd
->timer
) ||
104 time_before(timeout
, ifmgd
->timer
.expires
))
105 mod_timer(&ifmgd
->timer
, timeout
);
108 static void mod_beacon_timer(struct ieee80211_sub_if_data
*sdata
)
110 if (sdata
->local
->hw
.flags
& IEEE80211_HW_BEACON_FILTER
)
113 mod_timer(&sdata
->u
.mgd
.bcn_mon_timer
,
114 round_jiffies_up(jiffies
+ IEEE80211_BEACON_LOSS_TIME
));
117 static int ecw2cw(int ecw
)
119 return (1 << ecw
) - 1;
123 * ieee80211_enable_ht should be called only after the operating band
124 * has been determined as ht configuration depends on the hw's
125 * HT abilities for a specific band.
127 static u32
ieee80211_enable_ht(struct ieee80211_sub_if_data
*sdata
,
128 struct ieee80211_ht_info
*hti
,
129 const u8
*bssid
, u16 ap_ht_cap_flags
)
131 struct ieee80211_local
*local
= sdata
->local
;
132 struct ieee80211_supported_band
*sband
;
133 struct sta_info
*sta
;
136 bool enable_ht
= true, ht_changed
;
137 enum nl80211_channel_type channel_type
= NL80211_CHAN_NO_HT
;
139 sband
= local
->hw
.wiphy
->bands
[local
->hw
.conf
.channel
->band
];
141 /* HT is not supported */
142 if (!sband
->ht_cap
.ht_supported
)
145 /* check that channel matches the right operating channel */
146 if (local
->hw
.conf
.channel
->center_freq
!=
147 ieee80211_channel_to_frequency(hti
->control_chan
))
151 channel_type
= NL80211_CHAN_HT20
;
153 if (!(ap_ht_cap_flags
& IEEE80211_HT_CAP_40MHZ_INTOLERANT
) &&
154 (sband
->ht_cap
.cap
& IEEE80211_HT_CAP_SUP_WIDTH_20_40
) &&
155 (hti
->ht_param
& IEEE80211_HT_PARAM_CHAN_WIDTH_ANY
)) {
156 switch(hti
->ht_param
& IEEE80211_HT_PARAM_CHA_SEC_OFFSET
) {
157 case IEEE80211_HT_PARAM_CHA_SEC_ABOVE
:
158 if (!(local
->hw
.conf
.channel
->flags
&
159 IEEE80211_CHAN_NO_HT40PLUS
))
160 channel_type
= NL80211_CHAN_HT40PLUS
;
162 case IEEE80211_HT_PARAM_CHA_SEC_BELOW
:
163 if (!(local
->hw
.conf
.channel
->flags
&
164 IEEE80211_CHAN_NO_HT40MINUS
))
165 channel_type
= NL80211_CHAN_HT40MINUS
;
171 ht_changed
= conf_is_ht(&local
->hw
.conf
) != enable_ht
||
172 channel_type
!= local
->hw
.conf
.channel_type
;
174 local
->oper_channel_type
= channel_type
;
177 /* channel_type change automatically detected */
178 ieee80211_hw_config(local
, 0);
181 sta
= sta_info_get(sdata
, bssid
);
183 rate_control_rate_update(local
, sband
, sta
,
184 IEEE80211_RC_HT_CHANGED
);
192 ht_opmode
= le16_to_cpu(hti
->operation_mode
);
194 /* if bss configuration changed store the new one */
195 if (!sdata
->ht_opmode_valid
||
196 sdata
->vif
.bss_conf
.ht_operation_mode
!= ht_opmode
) {
197 changed
|= BSS_CHANGED_HT
;
198 sdata
->vif
.bss_conf
.ht_operation_mode
= ht_opmode
;
199 sdata
->ht_opmode_valid
= true;
205 /* frame sending functions */
207 static void ieee80211_send_deauth_disassoc(struct ieee80211_sub_if_data
*sdata
,
208 const u8
*bssid
, u16 stype
, u16 reason
,
211 struct ieee80211_local
*local
= sdata
->local
;
212 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
214 struct ieee80211_mgmt
*mgmt
;
216 skb
= dev_alloc_skb(local
->hw
.extra_tx_headroom
+ sizeof(*mgmt
));
218 printk(KERN_DEBUG
"%s: failed to allocate buffer for "
219 "deauth/disassoc frame\n", sdata
->name
);
222 skb_reserve(skb
, local
->hw
.extra_tx_headroom
);
224 mgmt
= (struct ieee80211_mgmt
*) skb_put(skb
, 24);
226 memcpy(mgmt
->da
, bssid
, ETH_ALEN
);
227 memcpy(mgmt
->sa
, sdata
->vif
.addr
, ETH_ALEN
);
228 memcpy(mgmt
->bssid
, bssid
, ETH_ALEN
);
229 mgmt
->frame_control
= cpu_to_le16(IEEE80211_FTYPE_MGMT
| stype
);
231 /* u.deauth.reason_code == u.disassoc.reason_code */
232 mgmt
->u
.deauth
.reason_code
= cpu_to_le16(reason
);
234 if (stype
== IEEE80211_STYPE_DEAUTH
)
236 __cfg80211_send_deauth(sdata
->dev
, (u8
*)mgmt
, skb
->len
);
238 cfg80211_send_deauth(sdata
->dev
, (u8
*)mgmt
, skb
->len
);
241 __cfg80211_send_disassoc(sdata
->dev
, (u8
*)mgmt
, skb
->len
);
243 cfg80211_send_disassoc(sdata
->dev
, (u8
*)mgmt
, skb
->len
);
244 if (!(ifmgd
->flags
& IEEE80211_STA_MFP_ENABLED
))
245 IEEE80211_SKB_CB(skb
)->flags
|= IEEE80211_TX_INTFL_DONT_ENCRYPT
;
246 ieee80211_tx_skb(sdata
, skb
);
249 void ieee80211_send_pspoll(struct ieee80211_local
*local
,
250 struct ieee80211_sub_if_data
*sdata
)
252 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
253 struct ieee80211_pspoll
*pspoll
;
257 skb
= dev_alloc_skb(local
->hw
.extra_tx_headroom
+ sizeof(*pspoll
));
259 printk(KERN_DEBUG
"%s: failed to allocate buffer for "
260 "pspoll frame\n", sdata
->name
);
263 skb_reserve(skb
, local
->hw
.extra_tx_headroom
);
265 pspoll
= (struct ieee80211_pspoll
*) skb_put(skb
, sizeof(*pspoll
));
266 memset(pspoll
, 0, sizeof(*pspoll
));
267 fc
= IEEE80211_FTYPE_CTL
| IEEE80211_STYPE_PSPOLL
| IEEE80211_FCTL_PM
;
268 pspoll
->frame_control
= cpu_to_le16(fc
);
269 pspoll
->aid
= cpu_to_le16(ifmgd
->aid
);
271 /* aid in PS-Poll has its two MSBs each set to 1 */
272 pspoll
->aid
|= cpu_to_le16(1 << 15 | 1 << 14);
274 memcpy(pspoll
->bssid
, ifmgd
->bssid
, ETH_ALEN
);
275 memcpy(pspoll
->ta
, sdata
->vif
.addr
, ETH_ALEN
);
277 IEEE80211_SKB_CB(skb
)->flags
|= IEEE80211_TX_INTFL_DONT_ENCRYPT
;
278 ieee80211_tx_skb(sdata
, skb
);
281 void ieee80211_send_nullfunc(struct ieee80211_local
*local
,
282 struct ieee80211_sub_if_data
*sdata
,
286 struct ieee80211_hdr
*nullfunc
;
289 if (WARN_ON(sdata
->vif
.type
!= NL80211_IFTYPE_STATION
))
292 skb
= dev_alloc_skb(local
->hw
.extra_tx_headroom
+ 24);
294 printk(KERN_DEBUG
"%s: failed to allocate buffer for nullfunc "
295 "frame\n", sdata
->name
);
298 skb_reserve(skb
, local
->hw
.extra_tx_headroom
);
300 nullfunc
= (struct ieee80211_hdr
*) skb_put(skb
, 24);
301 memset(nullfunc
, 0, 24);
302 fc
= cpu_to_le16(IEEE80211_FTYPE_DATA
| IEEE80211_STYPE_NULLFUNC
|
303 IEEE80211_FCTL_TODS
);
305 fc
|= cpu_to_le16(IEEE80211_FCTL_PM
);
306 nullfunc
->frame_control
= fc
;
307 memcpy(nullfunc
->addr1
, sdata
->u
.mgd
.bssid
, ETH_ALEN
);
308 memcpy(nullfunc
->addr2
, sdata
->vif
.addr
, ETH_ALEN
);
309 memcpy(nullfunc
->addr3
, sdata
->u
.mgd
.bssid
, ETH_ALEN
);
311 IEEE80211_SKB_CB(skb
)->flags
|= IEEE80211_TX_INTFL_DONT_ENCRYPT
;
312 ieee80211_tx_skb(sdata
, skb
);
315 /* spectrum management related things */
316 static void ieee80211_chswitch_work(struct work_struct
*work
)
318 struct ieee80211_sub_if_data
*sdata
=
319 container_of(work
, struct ieee80211_sub_if_data
, u
.mgd
.chswitch_work
);
320 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
322 if (!ieee80211_sdata_running(sdata
))
325 mutex_lock(&ifmgd
->mtx
);
326 if (!ifmgd
->associated
)
329 sdata
->local
->oper_channel
= sdata
->local
->csa_channel
;
330 ieee80211_hw_config(sdata
->local
, IEEE80211_CONF_CHANGE_CHANNEL
);
332 /* XXX: shouldn't really modify cfg80211-owned data! */
333 ifmgd
->associated
->channel
= sdata
->local
->oper_channel
;
335 ieee80211_wake_queues_by_reason(&sdata
->local
->hw
,
336 IEEE80211_QUEUE_STOP_REASON_CSA
);
338 ifmgd
->flags
&= ~IEEE80211_STA_CSA_RECEIVED
;
339 mutex_unlock(&ifmgd
->mtx
);
342 static void ieee80211_chswitch_timer(unsigned long data
)
344 struct ieee80211_sub_if_data
*sdata
=
345 (struct ieee80211_sub_if_data
*) data
;
346 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
348 if (sdata
->local
->quiescing
) {
349 set_bit(TMR_RUNNING_CHANSW
, &ifmgd
->timers_running
);
353 ieee80211_queue_work(&sdata
->local
->hw
, &ifmgd
->chswitch_work
);
356 void ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data
*sdata
,
357 struct ieee80211_channel_sw_ie
*sw_elem
,
358 struct ieee80211_bss
*bss
)
360 struct cfg80211_bss
*cbss
=
361 container_of((void *)bss
, struct cfg80211_bss
, priv
);
362 struct ieee80211_channel
*new_ch
;
363 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
364 int new_freq
= ieee80211_channel_to_frequency(sw_elem
->new_ch_num
);
366 ASSERT_MGD_MTX(ifmgd
);
368 if (!ifmgd
->associated
)
371 if (sdata
->local
->scanning
)
374 /* Disregard subsequent beacons if we are already running a timer
377 if (ifmgd
->flags
& IEEE80211_STA_CSA_RECEIVED
)
380 new_ch
= ieee80211_get_channel(sdata
->local
->hw
.wiphy
, new_freq
);
381 if (!new_ch
|| new_ch
->flags
& IEEE80211_CHAN_DISABLED
)
384 sdata
->local
->csa_channel
= new_ch
;
386 if (sw_elem
->count
<= 1) {
387 ieee80211_queue_work(&sdata
->local
->hw
, &ifmgd
->chswitch_work
);
389 ieee80211_stop_queues_by_reason(&sdata
->local
->hw
,
390 IEEE80211_QUEUE_STOP_REASON_CSA
);
391 ifmgd
->flags
|= IEEE80211_STA_CSA_RECEIVED
;
392 mod_timer(&ifmgd
->chswitch_timer
,
394 msecs_to_jiffies(sw_elem
->count
*
395 cbss
->beacon_interval
));
399 static void ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data
*sdata
,
400 u16 capab_info
, u8
*pwr_constr_elem
,
401 u8 pwr_constr_elem_len
)
403 struct ieee80211_conf
*conf
= &sdata
->local
->hw
.conf
;
405 if (!(capab_info
& WLAN_CAPABILITY_SPECTRUM_MGMT
))
408 /* Power constraint IE length should be 1 octet */
409 if (pwr_constr_elem_len
!= 1)
412 if ((*pwr_constr_elem
<= conf
->channel
->max_power
) &&
413 (*pwr_constr_elem
!= sdata
->local
->power_constr_level
)) {
414 sdata
->local
->power_constr_level
= *pwr_constr_elem
;
415 ieee80211_hw_config(sdata
->local
, 0);
420 static void ieee80211_enable_ps(struct ieee80211_local
*local
,
421 struct ieee80211_sub_if_data
*sdata
)
423 struct ieee80211_conf
*conf
= &local
->hw
.conf
;
426 * If we are scanning right now then the parameters will
427 * take effect when scan finishes.
432 if (conf
->dynamic_ps_timeout
> 0 &&
433 !(local
->hw
.flags
& IEEE80211_HW_SUPPORTS_DYNAMIC_PS
)) {
434 mod_timer(&local
->dynamic_ps_timer
, jiffies
+
435 msecs_to_jiffies(conf
->dynamic_ps_timeout
));
437 if (local
->hw
.flags
& IEEE80211_HW_PS_NULLFUNC_STACK
)
438 ieee80211_send_nullfunc(local
, sdata
, 1);
439 conf
->flags
|= IEEE80211_CONF_PS
;
440 ieee80211_hw_config(local
, IEEE80211_CONF_CHANGE_PS
);
444 static void ieee80211_change_ps(struct ieee80211_local
*local
)
446 struct ieee80211_conf
*conf
= &local
->hw
.conf
;
448 if (local
->ps_sdata
) {
449 ieee80211_enable_ps(local
, local
->ps_sdata
);
450 } else if (conf
->flags
& IEEE80211_CONF_PS
) {
451 conf
->flags
&= ~IEEE80211_CONF_PS
;
452 ieee80211_hw_config(local
, IEEE80211_CONF_CHANGE_PS
);
453 del_timer_sync(&local
->dynamic_ps_timer
);
454 cancel_work_sync(&local
->dynamic_ps_enable_work
);
458 /* need to hold RTNL or interface lock */
459 void ieee80211_recalc_ps(struct ieee80211_local
*local
, s32 latency
)
461 struct ieee80211_sub_if_data
*sdata
, *found
= NULL
;
464 if (!(local
->hw
.flags
& IEEE80211_HW_SUPPORTS_PS
)) {
465 local
->ps_sdata
= NULL
;
469 if (!list_empty(&local
->work_list
)) {
470 local
->ps_sdata
= NULL
;
474 list_for_each_entry(sdata
, &local
->interfaces
, list
) {
475 if (!ieee80211_sdata_running(sdata
))
477 if (sdata
->vif
.type
!= NL80211_IFTYPE_STATION
)
483 if (count
== 1 && found
->u
.mgd
.powersave
&&
484 found
->u
.mgd
.associated
&&
485 !(found
->u
.mgd
.flags
& (IEEE80211_STA_BEACON_POLL
|
486 IEEE80211_STA_CONNECTION_POLL
))) {
490 latency
= pm_qos_requirement(PM_QOS_NETWORK_LATENCY
);
492 beaconint_us
= ieee80211_tu_to_usec(
493 found
->vif
.bss_conf
.beacon_int
);
495 if (beaconint_us
> latency
) {
496 local
->ps_sdata
= NULL
;
498 u8 dtimper
= found
->vif
.bss_conf
.dtim_period
;
502 maxslp
= min_t(int, dtimper
,
503 latency
/ beaconint_us
);
505 local
->hw
.conf
.max_sleep_period
= maxslp
;
506 local
->ps_sdata
= found
;
509 local
->ps_sdata
= NULL
;
513 ieee80211_change_ps(local
);
516 void ieee80211_dynamic_ps_disable_work(struct work_struct
*work
)
518 struct ieee80211_local
*local
=
519 container_of(work
, struct ieee80211_local
,
520 dynamic_ps_disable_work
);
522 if (local
->hw
.conf
.flags
& IEEE80211_CONF_PS
) {
523 local
->hw
.conf
.flags
&= ~IEEE80211_CONF_PS
;
524 ieee80211_hw_config(local
, IEEE80211_CONF_CHANGE_PS
);
527 ieee80211_wake_queues_by_reason(&local
->hw
,
528 IEEE80211_QUEUE_STOP_REASON_PS
);
531 void ieee80211_dynamic_ps_enable_work(struct work_struct
*work
)
533 struct ieee80211_local
*local
=
534 container_of(work
, struct ieee80211_local
,
535 dynamic_ps_enable_work
);
536 struct ieee80211_sub_if_data
*sdata
= local
->ps_sdata
;
538 /* can only happen when PS was just disabled anyway */
542 if (local
->hw
.conf
.flags
& IEEE80211_CONF_PS
)
545 if (local
->hw
.flags
& IEEE80211_HW_PS_NULLFUNC_STACK
)
546 ieee80211_send_nullfunc(local
, sdata
, 1);
548 local
->hw
.conf
.flags
|= IEEE80211_CONF_PS
;
549 ieee80211_hw_config(local
, IEEE80211_CONF_CHANGE_PS
);
552 void ieee80211_dynamic_ps_timer(unsigned long data
)
554 struct ieee80211_local
*local
= (void *) data
;
556 if (local
->quiescing
|| local
->suspended
)
559 ieee80211_queue_work(&local
->hw
, &local
->dynamic_ps_enable_work
);
563 static void ieee80211_sta_wmm_params(struct ieee80211_local
*local
,
564 struct ieee80211_if_managed
*ifmgd
,
565 u8
*wmm_param
, size_t wmm_param_len
)
567 struct ieee80211_tx_queue_params params
;
572 if (local
->hw
.queues
< 4)
578 if (wmm_param_len
< 8 || wmm_param
[5] /* version */ != 1)
580 count
= wmm_param
[6] & 0x0f;
581 if (count
== ifmgd
->wmm_last_param_set
)
583 ifmgd
->wmm_last_param_set
= count
;
586 left
= wmm_param_len
- 8;
588 memset(¶ms
, 0, sizeof(params
));
591 for (; left
>= 4; left
-= 4, pos
+= 4) {
592 int aci
= (pos
[0] >> 5) & 0x03;
593 int acm
= (pos
[0] >> 4) & 0x01;
600 local
->wmm_acm
|= BIT(1) | BIT(2); /* BK/- */
605 local
->wmm_acm
|= BIT(4) | BIT(5); /* CL/VI */
610 local
->wmm_acm
|= BIT(6) | BIT(7); /* VO/NC */
616 local
->wmm_acm
|= BIT(0) | BIT(3); /* BE/EE */
620 params
.aifs
= pos
[0] & 0x0f;
621 params
.cw_max
= ecw2cw((pos
[1] & 0xf0) >> 4);
622 params
.cw_min
= ecw2cw(pos
[1] & 0x0f);
623 params
.txop
= get_unaligned_le16(pos
+ 2);
624 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
625 printk(KERN_DEBUG
"%s: WMM queue=%d aci=%d acm=%d aifs=%d "
626 "cWmin=%d cWmax=%d txop=%d\n",
627 wiphy_name(local
->hw
.wiphy
), queue
, aci
, acm
,
628 params
.aifs
, params
.cw_min
, params
.cw_max
, params
.txop
);
630 if (drv_conf_tx(local
, queue
, ¶ms
) && local
->ops
->conf_tx
)
631 printk(KERN_DEBUG
"%s: failed to set TX queue "
632 "parameters for queue %d\n",
633 wiphy_name(local
->hw
.wiphy
), queue
);
637 static u32
ieee80211_handle_bss_capability(struct ieee80211_sub_if_data
*sdata
,
638 u16 capab
, bool erp_valid
, u8 erp
)
640 struct ieee80211_bss_conf
*bss_conf
= &sdata
->vif
.bss_conf
;
643 bool use_short_preamble
;
647 use_protection
= (erp
& WLAN_ERP_USE_PROTECTION
) != 0;
648 use_short_preamble
= (erp
& WLAN_ERP_BARKER_PREAMBLE
) == 0;
650 use_protection
= false;
651 use_short_preamble
= !!(capab
& WLAN_CAPABILITY_SHORT_PREAMBLE
);
654 use_short_slot
= !!(capab
& WLAN_CAPABILITY_SHORT_SLOT_TIME
);
656 if (use_protection
!= bss_conf
->use_cts_prot
) {
657 bss_conf
->use_cts_prot
= use_protection
;
658 changed
|= BSS_CHANGED_ERP_CTS_PROT
;
661 if (use_short_preamble
!= bss_conf
->use_short_preamble
) {
662 bss_conf
->use_short_preamble
= use_short_preamble
;
663 changed
|= BSS_CHANGED_ERP_PREAMBLE
;
666 if (use_short_slot
!= bss_conf
->use_short_slot
) {
667 bss_conf
->use_short_slot
= use_short_slot
;
668 changed
|= BSS_CHANGED_ERP_SLOT
;
674 static void ieee80211_set_associated(struct ieee80211_sub_if_data
*sdata
,
675 struct cfg80211_bss
*cbss
,
676 u32 bss_info_changed
)
678 struct ieee80211_bss
*bss
= (void *)cbss
->priv
;
679 struct ieee80211_local
*local
= sdata
->local
;
681 bss_info_changed
|= BSS_CHANGED_ASSOC
;
682 /* set timing information */
683 sdata
->vif
.bss_conf
.beacon_int
= cbss
->beacon_interval
;
684 sdata
->vif
.bss_conf
.timestamp
= cbss
->tsf
;
685 sdata
->vif
.bss_conf
.dtim_period
= bss
->dtim_period
;
687 bss_info_changed
|= BSS_CHANGED_BEACON_INT
;
688 bss_info_changed
|= ieee80211_handle_bss_capability(sdata
,
689 cbss
->capability
, bss
->has_erp_value
, bss
->erp_value
);
691 sdata
->u
.mgd
.associated
= cbss
;
692 memcpy(sdata
->u
.mgd
.bssid
, cbss
->bssid
, ETH_ALEN
);
694 /* just to be sure */
695 sdata
->u
.mgd
.flags
&= ~(IEEE80211_STA_CONNECTION_POLL
|
696 IEEE80211_STA_BEACON_POLL
);
699 * Always handle WMM once after association regardless
700 * of the first value the AP uses. Setting -1 here has
701 * that effect because the AP values is an unsigned
704 sdata
->u
.mgd
.wmm_last_param_set
= -1;
706 ieee80211_led_assoc(local
, 1);
708 sdata
->vif
.bss_conf
.assoc
= 1;
710 * For now just always ask the driver to update the basic rateset
711 * when we have associated, we aren't checking whether it actually
714 bss_info_changed
|= BSS_CHANGED_BASIC_RATES
;
716 /* And the BSSID changed - we're associated now */
717 bss_info_changed
|= BSS_CHANGED_BSSID
;
719 ieee80211_bss_info_change_notify(sdata
, bss_info_changed
);
721 mutex_lock(&local
->iflist_mtx
);
722 ieee80211_recalc_ps(local
, -1);
723 ieee80211_recalc_smps(local
, sdata
);
724 mutex_unlock(&local
->iflist_mtx
);
726 netif_tx_start_all_queues(sdata
->dev
);
727 netif_carrier_on(sdata
->dev
);
730 static void ieee80211_set_disassoc(struct ieee80211_sub_if_data
*sdata
)
732 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
733 struct ieee80211_local
*local
= sdata
->local
;
734 struct sta_info
*sta
;
735 u32 changed
= 0, config_changed
= 0;
738 ASSERT_MGD_MTX(ifmgd
);
740 if (WARN_ON(!ifmgd
->associated
))
743 memcpy(bssid
, ifmgd
->associated
->bssid
, ETH_ALEN
);
745 ifmgd
->associated
= NULL
;
746 memset(ifmgd
->bssid
, 0, ETH_ALEN
);
749 * we need to commit the associated = NULL change because the
750 * scan code uses that to determine whether this iface should
751 * go to/wake up from powersave or not -- and could otherwise
752 * wake the queues erroneously.
757 * Thus, we can only afterwards stop the queues -- to account
758 * for the case where another CPU is finishing a scan at this
759 * time -- we don't want the scan code to enable queues.
762 netif_tx_stop_all_queues(sdata
->dev
);
763 netif_carrier_off(sdata
->dev
);
766 sta
= sta_info_get(sdata
, bssid
);
768 ieee80211_sta_tear_down_BA_sessions(sta
);
771 changed
|= ieee80211_reset_erp_info(sdata
);
773 ieee80211_led_assoc(local
, 0);
774 changed
|= BSS_CHANGED_ASSOC
;
775 sdata
->vif
.bss_conf
.assoc
= false;
777 ieee80211_set_wmm_default(sdata
);
779 /* channel(_type) changes are handled by ieee80211_hw_config */
780 local
->oper_channel_type
= NL80211_CHAN_NO_HT
;
782 /* on the next assoc, re-program HT parameters */
783 sdata
->ht_opmode_valid
= false;
785 local
->power_constr_level
= 0;
787 del_timer_sync(&local
->dynamic_ps_timer
);
788 cancel_work_sync(&local
->dynamic_ps_enable_work
);
790 if (local
->hw
.conf
.flags
& IEEE80211_CONF_PS
) {
791 local
->hw
.conf
.flags
&= ~IEEE80211_CONF_PS
;
792 config_changed
|= IEEE80211_CONF_CHANGE_PS
;
795 ieee80211_hw_config(local
, config_changed
);
797 /* And the BSSID changed -- not very interesting here */
798 changed
|= BSS_CHANGED_BSSID
;
799 ieee80211_bss_info_change_notify(sdata
, changed
);
803 sta
= sta_info_get(sdata
, bssid
);
809 sta_info_unlink(&sta
);
813 sta_info_destroy(sta
);
816 void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data
*sdata
,
817 struct ieee80211_hdr
*hdr
)
820 * We can postpone the mgd.timer whenever receiving unicast frames
821 * from AP because we know that the connection is working both ways
822 * at that time. But multicast frames (and hence also beacons) must
823 * be ignored here, because we need to trigger the timer during
824 * data idle periods for sending the periodic probe request to the
825 * AP we're connected to.
827 if (is_multicast_ether_addr(hdr
->addr1
))
830 mod_timer(&sdata
->u
.mgd
.conn_mon_timer
,
831 round_jiffies_up(jiffies
+ IEEE80211_CONNECTION_IDLE_TIME
));
834 static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data
*sdata
)
836 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
839 ssid
= ieee80211_bss_get_ie(ifmgd
->associated
, WLAN_EID_SSID
);
840 ieee80211_send_probe_req(sdata
, ifmgd
->associated
->bssid
,
841 ssid
+ 2, ssid
[1], NULL
, 0);
843 ifmgd
->probe_send_count
++;
844 ifmgd
->probe_timeout
= jiffies
+ IEEE80211_PROBE_WAIT
;
845 run_again(ifmgd
, ifmgd
->probe_timeout
);
848 static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data
*sdata
,
851 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
852 bool already
= false;
854 if (!ieee80211_sdata_running(sdata
))
857 if (sdata
->local
->scanning
)
860 if (sdata
->local
->tmp_channel
)
863 mutex_lock(&ifmgd
->mtx
);
865 if (!ifmgd
->associated
)
868 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
869 if (beacon
&& net_ratelimit())
870 printk(KERN_DEBUG
"%s: detected beacon loss from AP "
871 "- sending probe request\n", sdata
->name
);
875 * The driver/our work has already reported this event or the
876 * connection monitoring has kicked in and we have already sent
877 * a probe request. Or maybe the AP died and the driver keeps
878 * reporting until we disassociate...
880 * In either case we have to ignore the current call to this
881 * function (except for setting the correct probe reason bit)
882 * because otherwise we would reset the timer every time and
883 * never check whether we received a probe response!
885 if (ifmgd
->flags
& (IEEE80211_STA_BEACON_POLL
|
886 IEEE80211_STA_CONNECTION_POLL
))
890 ifmgd
->flags
|= IEEE80211_STA_BEACON_POLL
;
892 ifmgd
->flags
|= IEEE80211_STA_CONNECTION_POLL
;
897 mutex_lock(&sdata
->local
->iflist_mtx
);
898 ieee80211_recalc_ps(sdata
->local
, -1);
899 mutex_unlock(&sdata
->local
->iflist_mtx
);
901 ifmgd
->probe_send_count
= 0;
902 ieee80211_mgd_probe_ap_send(sdata
);
904 mutex_unlock(&ifmgd
->mtx
);
907 void ieee80211_beacon_loss_work(struct work_struct
*work
)
909 struct ieee80211_sub_if_data
*sdata
=
910 container_of(work
, struct ieee80211_sub_if_data
,
911 u
.mgd
.beacon_loss_work
);
913 ieee80211_mgd_probe_ap(sdata
, true);
916 void ieee80211_beacon_loss(struct ieee80211_vif
*vif
)
918 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
920 ieee80211_queue_work(&sdata
->local
->hw
, &sdata
->u
.mgd
.beacon_loss_work
);
922 EXPORT_SYMBOL(ieee80211_beacon_loss
);
924 static enum rx_mgmt_action __must_check
925 ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data
*sdata
,
926 struct ieee80211_mgmt
*mgmt
, size_t len
)
928 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
929 const u8
*bssid
= NULL
;
935 ASSERT_MGD_MTX(ifmgd
);
937 bssid
= ifmgd
->associated
->bssid
;
939 reason_code
= le16_to_cpu(mgmt
->u
.deauth
.reason_code
);
941 printk(KERN_DEBUG
"%s: deauthenticated from %pM (Reason: %u)\n",
942 sdata
->name
, bssid
, reason_code
);
944 ieee80211_set_disassoc(sdata
);
945 ieee80211_recalc_idle(sdata
->local
);
947 return RX_MGMT_CFG80211_DEAUTH
;
951 static enum rx_mgmt_action __must_check
952 ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data
*sdata
,
953 struct ieee80211_mgmt
*mgmt
, size_t len
)
955 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
961 ASSERT_MGD_MTX(ifmgd
);
963 if (WARN_ON(!ifmgd
->associated
))
966 if (WARN_ON(memcmp(ifmgd
->associated
->bssid
, mgmt
->sa
, ETH_ALEN
)))
969 reason_code
= le16_to_cpu(mgmt
->u
.disassoc
.reason_code
);
971 printk(KERN_DEBUG
"%s: disassociated from %pM (Reason: %u)\n",
972 sdata
->name
, mgmt
->sa
, reason_code
);
974 ieee80211_set_disassoc(sdata
);
975 ieee80211_recalc_idle(sdata
->local
);
976 return RX_MGMT_CFG80211_DISASSOC
;
980 static bool ieee80211_assoc_success(struct ieee80211_work
*wk
,
981 struct ieee80211_mgmt
*mgmt
, size_t len
)
983 struct ieee80211_sub_if_data
*sdata
= wk
->sdata
;
984 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
985 struct ieee80211_local
*local
= sdata
->local
;
986 struct ieee80211_supported_band
*sband
;
987 struct sta_info
*sta
;
988 struct cfg80211_bss
*cbss
= wk
->assoc
.bss
;
990 u32 rates
, basic_rates
;
992 struct ieee802_11_elems elems
;
993 struct ieee80211_bss_conf
*bss_conf
= &sdata
->vif
.bss_conf
;
996 bool have_higher_than_11mbit
= false;
999 /* AssocResp and ReassocResp have identical structure */
1001 aid
= le16_to_cpu(mgmt
->u
.assoc_resp
.aid
);
1002 capab_info
= le16_to_cpu(mgmt
->u
.assoc_resp
.capab_info
);
1004 if ((aid
& (BIT(15) | BIT(14))) != (BIT(15) | BIT(14)))
1005 printk(KERN_DEBUG
"%s: invalid aid value %d; bits 15:14 not "
1006 "set\n", sdata
->name
, aid
);
1007 aid
&= ~(BIT(15) | BIT(14));
1009 pos
= mgmt
->u
.assoc_resp
.variable
;
1010 ieee802_11_parse_elems(pos
, len
- (pos
- (u8
*) mgmt
), &elems
);
1012 if (!elems
.supp_rates
) {
1013 printk(KERN_DEBUG
"%s: no SuppRates element in AssocResp\n",
1020 sta
= sta_info_alloc(sdata
, cbss
->bssid
, GFP_KERNEL
);
1022 printk(KERN_DEBUG
"%s: failed to alloc STA entry for"
1023 " the AP\n", sdata
->name
);
1027 set_sta_flags(sta
, WLAN_STA_AUTH
| WLAN_STA_ASSOC
|
1029 if (!(ifmgd
->flags
& IEEE80211_STA_CONTROL_PORT
))
1030 set_sta_flags(sta
, WLAN_STA_AUTHORIZED
);
1034 sband
= local
->hw
.wiphy
->bands
[local
->hw
.conf
.channel
->band
];
1036 for (i
= 0; i
< elems
.supp_rates_len
; i
++) {
1037 int rate
= (elems
.supp_rates
[i
] & 0x7f) * 5;
1038 bool is_basic
= !!(elems
.supp_rates
[i
] & 0x80);
1041 have_higher_than_11mbit
= true;
1043 for (j
= 0; j
< sband
->n_bitrates
; j
++) {
1044 if (sband
->bitrates
[j
].bitrate
== rate
) {
1047 basic_rates
|= BIT(j
);
1053 for (i
= 0; i
< elems
.ext_supp_rates_len
; i
++) {
1054 int rate
= (elems
.ext_supp_rates
[i
] & 0x7f) * 5;
1055 bool is_basic
= !!(elems
.ext_supp_rates
[i
] & 0x80);
1058 have_higher_than_11mbit
= true;
1060 for (j
= 0; j
< sband
->n_bitrates
; j
++) {
1061 if (sband
->bitrates
[j
].bitrate
== rate
) {
1064 basic_rates
|= BIT(j
);
1070 sta
->sta
.supp_rates
[local
->hw
.conf
.channel
->band
] = rates
;
1071 sdata
->vif
.bss_conf
.basic_rates
= basic_rates
;
1073 /* cf. IEEE 802.11 9.2.12 */
1074 if (local
->hw
.conf
.channel
->band
== IEEE80211_BAND_2GHZ
&&
1075 have_higher_than_11mbit
)
1076 sdata
->flags
|= IEEE80211_SDATA_OPERATING_GMODE
;
1078 sdata
->flags
&= ~IEEE80211_SDATA_OPERATING_GMODE
;
1080 if (elems
.ht_cap_elem
&& !(ifmgd
->flags
& IEEE80211_STA_DISABLE_11N
))
1081 ieee80211_ht_cap_ie_to_sta_ht_cap(sband
,
1082 elems
.ht_cap_elem
, &sta
->sta
.ht_cap
);
1084 ap_ht_cap_flags
= sta
->sta
.ht_cap
.cap
;
1086 rate_control_rate_init(sta
);
1088 if (ifmgd
->flags
& IEEE80211_STA_MFP_ENABLED
)
1089 set_sta_flags(sta
, WLAN_STA_MFP
);
1091 if (elems
.wmm_param
)
1092 set_sta_flags(sta
, WLAN_STA_WME
);
1094 err
= sta_info_insert(sta
);
1097 printk(KERN_DEBUG
"%s: failed to insert STA entry for"
1098 " the AP (error %d)\n", sdata
->name
, err
);
1099 return RX_MGMT_CFG80211_ASSOC_ERROR
;
1102 if (elems
.wmm_param
)
1103 ieee80211_sta_wmm_params(local
, ifmgd
, elems
.wmm_param
,
1104 elems
.wmm_param_len
);
1106 ieee80211_set_wmm_default(sdata
);
1108 local
->oper_channel
= wk
->chan
;
1110 if (elems
.ht_info_elem
&& elems
.wmm_param
&&
1111 (sdata
->local
->hw
.queues
>= 4) &&
1112 !(ifmgd
->flags
& IEEE80211_STA_DISABLE_11N
))
1113 changed
|= ieee80211_enable_ht(sdata
, elems
.ht_info_elem
,
1114 cbss
->bssid
, ap_ht_cap_flags
);
1116 /* set AID and assoc capability,
1117 * ieee80211_set_associated() will tell the driver */
1118 bss_conf
->aid
= aid
;
1119 bss_conf
->assoc_capability
= capab_info
;
1120 ieee80211_set_associated(sdata
, cbss
, changed
);
1123 * Start timer to probe the connection to the AP now.
1124 * Also start the timer that will detect beacon loss.
1126 ieee80211_sta_rx_notify(sdata
, (struct ieee80211_hdr
*)mgmt
);
1127 mod_beacon_timer(sdata
);
1133 static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data
*sdata
,
1134 struct ieee80211_mgmt
*mgmt
,
1136 struct ieee80211_rx_status
*rx_status
,
1137 struct ieee802_11_elems
*elems
,
1140 struct ieee80211_local
*local
= sdata
->local
;
1142 struct ieee80211_bss
*bss
;
1143 struct ieee80211_channel
*channel
;
1145 if (elems
->ds_params
&& elems
->ds_params_len
== 1)
1146 freq
= ieee80211_channel_to_frequency(elems
->ds_params
[0]);
1148 freq
= rx_status
->freq
;
1150 channel
= ieee80211_get_channel(local
->hw
.wiphy
, freq
);
1152 if (!channel
|| channel
->flags
& IEEE80211_CHAN_DISABLED
)
1155 bss
= ieee80211_bss_info_update(local
, rx_status
, mgmt
, len
, elems
,
1158 ieee80211_rx_bss_put(local
, bss
);
1160 if (!sdata
->u
.mgd
.associated
)
1163 if (elems
->ch_switch_elem
&& (elems
->ch_switch_elem_len
== 3) &&
1164 (memcmp(mgmt
->bssid
, sdata
->u
.mgd
.associated
->bssid
,
1166 struct ieee80211_channel_sw_ie
*sw_elem
=
1167 (struct ieee80211_channel_sw_ie
*)elems
->ch_switch_elem
;
1168 ieee80211_sta_process_chanswitch(sdata
, sw_elem
, bss
);
1173 static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data
*sdata
,
1174 struct sk_buff
*skb
)
1176 struct ieee80211_mgmt
*mgmt
= (void *)skb
->data
;
1177 struct ieee80211_if_managed
*ifmgd
;
1178 struct ieee80211_rx_status
*rx_status
= (void *) skb
->cb
;
1179 size_t baselen
, len
= skb
->len
;
1180 struct ieee802_11_elems elems
;
1182 ifmgd
= &sdata
->u
.mgd
;
1184 ASSERT_MGD_MTX(ifmgd
);
1186 if (memcmp(mgmt
->da
, sdata
->vif
.addr
, ETH_ALEN
))
1187 return; /* ignore ProbeResp to foreign address */
1189 baselen
= (u8
*) mgmt
->u
.probe_resp
.variable
- (u8
*) mgmt
;
1193 ieee802_11_parse_elems(mgmt
->u
.probe_resp
.variable
, len
- baselen
,
1196 ieee80211_rx_bss_info(sdata
, mgmt
, len
, rx_status
, &elems
, false);
1198 if (ifmgd
->associated
&&
1199 memcmp(mgmt
->bssid
, ifmgd
->associated
->bssid
, ETH_ALEN
) == 0 &&
1200 ifmgd
->flags
& (IEEE80211_STA_BEACON_POLL
|
1201 IEEE80211_STA_CONNECTION_POLL
)) {
1202 ifmgd
->flags
&= ~(IEEE80211_STA_CONNECTION_POLL
|
1203 IEEE80211_STA_BEACON_POLL
);
1204 mutex_lock(&sdata
->local
->iflist_mtx
);
1205 ieee80211_recalc_ps(sdata
->local
, -1);
1206 mutex_unlock(&sdata
->local
->iflist_mtx
);
1208 * We've received a probe response, but are not sure whether
1209 * we have or will be receiving any beacons or data, so let's
1210 * schedule the timers again, just in case.
1212 mod_beacon_timer(sdata
);
1213 mod_timer(&ifmgd
->conn_mon_timer
,
1214 round_jiffies_up(jiffies
+
1215 IEEE80211_CONNECTION_IDLE_TIME
));
1220 * This is the canonical list of information elements we care about,
1221 * the filter code also gives us all changes to the Microsoft OUI
1222 * (00:50:F2) vendor IE which is used for WMM which we need to track.
1224 * We implement beacon filtering in software since that means we can
1225 * avoid processing the frame here and in cfg80211, and userspace
1226 * will not be able to tell whether the hardware supports it or not.
1228 * XXX: This list needs to be dynamic -- userspace needs to be able to
1229 * add items it requires. It also needs to be able to tell us to
1230 * look out for other vendor IEs.
1232 static const u64 care_about_ies
=
1233 (1ULL << WLAN_EID_COUNTRY
) |
1234 (1ULL << WLAN_EID_ERP_INFO
) |
1235 (1ULL << WLAN_EID_CHANNEL_SWITCH
) |
1236 (1ULL << WLAN_EID_PWR_CONSTRAINT
) |
1237 (1ULL << WLAN_EID_HT_CAPABILITY
) |
1238 (1ULL << WLAN_EID_HT_INFORMATION
);
1240 static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data
*sdata
,
1241 struct ieee80211_mgmt
*mgmt
,
1243 struct ieee80211_rx_status
*rx_status
)
1245 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1247 struct ieee802_11_elems elems
;
1248 struct ieee80211_local
*local
= sdata
->local
;
1250 bool erp_valid
, directed_tim
= false;
1255 ASSERT_MGD_MTX(ifmgd
);
1257 /* Process beacon from the current BSS */
1258 baselen
= (u8
*) mgmt
->u
.beacon
.variable
- (u8
*) mgmt
;
1262 if (rx_status
->freq
!= local
->hw
.conf
.channel
->center_freq
)
1266 * We might have received a number of frames, among them a
1267 * disassoc frame and a beacon...
1269 if (!ifmgd
->associated
)
1272 bssid
= ifmgd
->associated
->bssid
;
1275 * And in theory even frames from a different AP we were just
1276 * associated to a split-second ago!
1278 if (memcmp(bssid
, mgmt
->bssid
, ETH_ALEN
) != 0)
1281 if (ifmgd
->flags
& IEEE80211_STA_BEACON_POLL
) {
1282 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
1283 if (net_ratelimit()) {
1284 printk(KERN_DEBUG
"%s: cancelling probereq poll due "
1285 "to a received beacon\n", sdata
->name
);
1288 ifmgd
->flags
&= ~IEEE80211_STA_BEACON_POLL
;
1289 mutex_lock(&local
->iflist_mtx
);
1290 ieee80211_recalc_ps(local
, -1);
1291 mutex_unlock(&local
->iflist_mtx
);
1295 * Push the beacon loss detection into the future since
1296 * we are processing a beacon from the AP just now.
1298 mod_beacon_timer(sdata
);
1300 ncrc
= crc32_be(0, (void *)&mgmt
->u
.beacon
.beacon_int
, 4);
1301 ncrc
= ieee802_11_parse_elems_crc(mgmt
->u
.beacon
.variable
,
1302 len
- baselen
, &elems
,
1303 care_about_ies
, ncrc
);
1305 if (local
->hw
.flags
& IEEE80211_HW_PS_NULLFUNC_STACK
)
1306 directed_tim
= ieee80211_check_tim(elems
.tim
, elems
.tim_len
,
1309 if (ncrc
!= ifmgd
->beacon_crc
) {
1310 ieee80211_rx_bss_info(sdata
, mgmt
, len
, rx_status
, &elems
,
1313 ieee80211_sta_wmm_params(local
, ifmgd
, elems
.wmm_param
,
1314 elems
.wmm_param_len
);
1317 if (local
->hw
.flags
& IEEE80211_HW_PS_NULLFUNC_STACK
) {
1319 if (local
->hw
.conf
.dynamic_ps_timeout
> 0) {
1320 local
->hw
.conf
.flags
&= ~IEEE80211_CONF_PS
;
1321 ieee80211_hw_config(local
,
1322 IEEE80211_CONF_CHANGE_PS
);
1323 ieee80211_send_nullfunc(local
, sdata
, 0);
1325 local
->pspolling
= true;
1328 * Here is assumed that the driver will be
1329 * able to send ps-poll frame and receive a
1330 * response even though power save mode is
1331 * enabled, but some drivers might require
1332 * to disable power save here. This needs
1333 * to be investigated.
1335 ieee80211_send_pspoll(local
, sdata
);
1340 if (ncrc
== ifmgd
->beacon_crc
)
1342 ifmgd
->beacon_crc
= ncrc
;
1344 if (elems
.erp_info
&& elems
.erp_info_len
>= 1) {
1346 erp_value
= elems
.erp_info
[0];
1350 changed
|= ieee80211_handle_bss_capability(sdata
,
1351 le16_to_cpu(mgmt
->u
.beacon
.capab_info
),
1352 erp_valid
, erp_value
);
1355 if (elems
.ht_cap_elem
&& elems
.ht_info_elem
&& elems
.wmm_param
&&
1356 !(ifmgd
->flags
& IEEE80211_STA_DISABLE_11N
)) {
1357 struct sta_info
*sta
;
1358 struct ieee80211_supported_band
*sband
;
1359 u16 ap_ht_cap_flags
;
1363 sta
= sta_info_get(sdata
, bssid
);
1364 if (WARN_ON(!sta
)) {
1369 sband
= local
->hw
.wiphy
->bands
[local
->hw
.conf
.channel
->band
];
1371 ieee80211_ht_cap_ie_to_sta_ht_cap(sband
,
1372 elems
.ht_cap_elem
, &sta
->sta
.ht_cap
);
1374 ap_ht_cap_flags
= sta
->sta
.ht_cap
.cap
;
1378 changed
|= ieee80211_enable_ht(sdata
, elems
.ht_info_elem
,
1379 bssid
, ap_ht_cap_flags
);
1382 /* Note: country IE parsing is done for us by cfg80211 */
1383 if (elems
.country_elem
) {
1384 /* TODO: IBSS also needs this */
1385 if (elems
.pwr_constr_elem
)
1386 ieee80211_handle_pwr_constr(sdata
,
1387 le16_to_cpu(mgmt
->u
.probe_resp
.capab_info
),
1388 elems
.pwr_constr_elem
,
1389 elems
.pwr_constr_elem_len
);
1392 ieee80211_bss_info_change_notify(sdata
, changed
);
1395 ieee80211_rx_result
ieee80211_sta_rx_mgmt(struct ieee80211_sub_if_data
*sdata
,
1396 struct sk_buff
*skb
)
1398 struct ieee80211_local
*local
= sdata
->local
;
1399 struct ieee80211_mgmt
*mgmt
;
1403 return RX_DROP_MONITOR
;
1405 mgmt
= (struct ieee80211_mgmt
*) skb
->data
;
1406 fc
= le16_to_cpu(mgmt
->frame_control
);
1408 switch (fc
& IEEE80211_FCTL_STYPE
) {
1409 case IEEE80211_STYPE_PROBE_RESP
:
1410 case IEEE80211_STYPE_BEACON
:
1411 case IEEE80211_STYPE_DEAUTH
:
1412 case IEEE80211_STYPE_DISASSOC
:
1413 case IEEE80211_STYPE_ACTION
:
1414 skb_queue_tail(&sdata
->u
.mgd
.skb_queue
, skb
);
1415 ieee80211_queue_work(&local
->hw
, &sdata
->u
.mgd
.work
);
1419 return RX_DROP_MONITOR
;
1422 static void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data
*sdata
,
1423 struct sk_buff
*skb
)
1425 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1426 struct ieee80211_rx_status
*rx_status
;
1427 struct ieee80211_mgmt
*mgmt
;
1428 enum rx_mgmt_action rma
= RX_MGMT_NONE
;
1431 rx_status
= (struct ieee80211_rx_status
*) skb
->cb
;
1432 mgmt
= (struct ieee80211_mgmt
*) skb
->data
;
1433 fc
= le16_to_cpu(mgmt
->frame_control
);
1435 mutex_lock(&ifmgd
->mtx
);
1437 if (ifmgd
->associated
&&
1438 memcmp(ifmgd
->associated
->bssid
, mgmt
->bssid
, ETH_ALEN
) == 0) {
1439 switch (fc
& IEEE80211_FCTL_STYPE
) {
1440 case IEEE80211_STYPE_BEACON
:
1441 ieee80211_rx_mgmt_beacon(sdata
, mgmt
, skb
->len
,
1444 case IEEE80211_STYPE_PROBE_RESP
:
1445 ieee80211_rx_mgmt_probe_resp(sdata
, skb
);
1447 case IEEE80211_STYPE_DEAUTH
:
1448 rma
= ieee80211_rx_mgmt_deauth(sdata
, mgmt
, skb
->len
);
1450 case IEEE80211_STYPE_DISASSOC
:
1451 rma
= ieee80211_rx_mgmt_disassoc(sdata
, mgmt
, skb
->len
);
1453 case IEEE80211_STYPE_ACTION
:
1454 /* XXX: differentiate, can only happen for CSA now! */
1455 ieee80211_sta_process_chanswitch(sdata
,
1456 &mgmt
->u
.action
.u
.chan_switch
.sw_elem
,
1457 (void *)ifmgd
->associated
->priv
);
1460 mutex_unlock(&ifmgd
->mtx
);
1466 case RX_MGMT_CFG80211_DEAUTH
:
1467 cfg80211_send_deauth(sdata
->dev
, (u8
*)mgmt
, skb
->len
);
1469 case RX_MGMT_CFG80211_DISASSOC
:
1470 cfg80211_send_disassoc(sdata
->dev
, (u8
*)mgmt
, skb
->len
);
1473 WARN(1, "unexpected: %d", rma
);
1478 mutex_unlock(&ifmgd
->mtx
);
1480 if (skb
->len
>= 24 + 2 /* mgmt + deauth reason */ &&
1481 (fc
& IEEE80211_FCTL_STYPE
) == IEEE80211_STYPE_DEAUTH
)
1482 cfg80211_send_deauth(sdata
->dev
, (u8
*)mgmt
, skb
->len
);
1488 static void ieee80211_sta_timer(unsigned long data
)
1490 struct ieee80211_sub_if_data
*sdata
=
1491 (struct ieee80211_sub_if_data
*) data
;
1492 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1493 struct ieee80211_local
*local
= sdata
->local
;
1495 if (local
->quiescing
) {
1496 set_bit(TMR_RUNNING_TIMER
, &ifmgd
->timers_running
);
1500 ieee80211_queue_work(&local
->hw
, &ifmgd
->work
);
1503 static void ieee80211_sta_work(struct work_struct
*work
)
1505 struct ieee80211_sub_if_data
*sdata
=
1506 container_of(work
, struct ieee80211_sub_if_data
, u
.mgd
.work
);
1507 struct ieee80211_local
*local
= sdata
->local
;
1508 struct ieee80211_if_managed
*ifmgd
;
1509 struct sk_buff
*skb
;
1511 if (!ieee80211_sdata_running(sdata
))
1514 if (local
->scanning
)
1517 if (WARN_ON(sdata
->vif
.type
!= NL80211_IFTYPE_STATION
))
1521 * ieee80211_queue_work() should have picked up most cases,
1522 * here we'll pick the the rest.
1524 if (WARN(local
->suspended
, "STA MLME work scheduled while "
1525 "going to suspend\n"))
1528 ifmgd
= &sdata
->u
.mgd
;
1530 /* first process frames to avoid timing out while a frame is pending */
1531 while ((skb
= skb_dequeue(&ifmgd
->skb_queue
)))
1532 ieee80211_sta_rx_queued_mgmt(sdata
, skb
);
1534 /* then process the rest of the work */
1535 mutex_lock(&ifmgd
->mtx
);
1537 if (ifmgd
->flags
& (IEEE80211_STA_BEACON_POLL
|
1538 IEEE80211_STA_CONNECTION_POLL
) &&
1539 ifmgd
->associated
) {
1542 memcpy(bssid
, ifmgd
->associated
->bssid
, ETH_ALEN
);
1543 if (time_is_after_jiffies(ifmgd
->probe_timeout
))
1544 run_again(ifmgd
, ifmgd
->probe_timeout
);
1546 else if (ifmgd
->probe_send_count
< IEEE80211_MAX_PROBE_TRIES
) {
1547 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
1548 printk(KERN_DEBUG
"No probe response from AP %pM"
1549 " after %dms, try %d\n", bssid
,
1550 (1000 * IEEE80211_PROBE_WAIT
)/HZ
,
1551 ifmgd
->probe_send_count
);
1553 ieee80211_mgd_probe_ap_send(sdata
);
1556 * We actually lost the connection ... or did we?
1559 ifmgd
->flags
&= ~(IEEE80211_STA_CONNECTION_POLL
|
1560 IEEE80211_STA_BEACON_POLL
);
1561 printk(KERN_DEBUG
"No probe response from AP %pM"
1562 " after %dms, disconnecting.\n",
1563 bssid
, (1000 * IEEE80211_PROBE_WAIT
)/HZ
);
1564 ieee80211_set_disassoc(sdata
);
1565 ieee80211_recalc_idle(local
);
1566 mutex_unlock(&ifmgd
->mtx
);
1568 * must be outside lock due to cfg80211,
1569 * but that's not a problem.
1571 ieee80211_send_deauth_disassoc(sdata
, bssid
,
1572 IEEE80211_STYPE_DEAUTH
,
1573 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY
,
1575 mutex_lock(&ifmgd
->mtx
);
1579 mutex_unlock(&ifmgd
->mtx
);
1582 static void ieee80211_sta_bcn_mon_timer(unsigned long data
)
1584 struct ieee80211_sub_if_data
*sdata
=
1585 (struct ieee80211_sub_if_data
*) data
;
1586 struct ieee80211_local
*local
= sdata
->local
;
1588 if (local
->quiescing
)
1591 ieee80211_queue_work(&sdata
->local
->hw
, &sdata
->u
.mgd
.beacon_loss_work
);
1594 static void ieee80211_sta_conn_mon_timer(unsigned long data
)
1596 struct ieee80211_sub_if_data
*sdata
=
1597 (struct ieee80211_sub_if_data
*) data
;
1598 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1599 struct ieee80211_local
*local
= sdata
->local
;
1601 if (local
->quiescing
)
1604 ieee80211_queue_work(&local
->hw
, &ifmgd
->monitor_work
);
1607 static void ieee80211_sta_monitor_work(struct work_struct
*work
)
1609 struct ieee80211_sub_if_data
*sdata
=
1610 container_of(work
, struct ieee80211_sub_if_data
,
1611 u
.mgd
.monitor_work
);
1613 ieee80211_mgd_probe_ap(sdata
, false);
1616 static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data
*sdata
)
1618 if (sdata
->vif
.type
== NL80211_IFTYPE_STATION
) {
1619 sdata
->u
.mgd
.flags
&= ~(IEEE80211_STA_BEACON_POLL
|
1620 IEEE80211_STA_CONNECTION_POLL
);
1622 /* let's probe the connection once */
1623 ieee80211_queue_work(&sdata
->local
->hw
,
1624 &sdata
->u
.mgd
.monitor_work
);
1625 /* and do all the other regular work too */
1626 ieee80211_queue_work(&sdata
->local
->hw
,
1627 &sdata
->u
.mgd
.work
);
1632 void ieee80211_sta_quiesce(struct ieee80211_sub_if_data
*sdata
)
1634 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1637 * we need to use atomic bitops for the running bits
1638 * only because both timers might fire at the same
1639 * time -- the code here is properly synchronised.
1642 cancel_work_sync(&ifmgd
->work
);
1643 cancel_work_sync(&ifmgd
->beacon_loss_work
);
1644 if (del_timer_sync(&ifmgd
->timer
))
1645 set_bit(TMR_RUNNING_TIMER
, &ifmgd
->timers_running
);
1647 cancel_work_sync(&ifmgd
->chswitch_work
);
1648 if (del_timer_sync(&ifmgd
->chswitch_timer
))
1649 set_bit(TMR_RUNNING_CHANSW
, &ifmgd
->timers_running
);
1651 cancel_work_sync(&ifmgd
->monitor_work
);
1652 /* these will just be re-established on connection */
1653 del_timer_sync(&ifmgd
->conn_mon_timer
);
1654 del_timer_sync(&ifmgd
->bcn_mon_timer
);
1657 void ieee80211_sta_restart(struct ieee80211_sub_if_data
*sdata
)
1659 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1661 if (test_and_clear_bit(TMR_RUNNING_TIMER
, &ifmgd
->timers_running
))
1662 add_timer(&ifmgd
->timer
);
1663 if (test_and_clear_bit(TMR_RUNNING_CHANSW
, &ifmgd
->timers_running
))
1664 add_timer(&ifmgd
->chswitch_timer
);
1668 /* interface setup */
1669 void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data
*sdata
)
1671 struct ieee80211_if_managed
*ifmgd
;
1673 ifmgd
= &sdata
->u
.mgd
;
1674 INIT_WORK(&ifmgd
->work
, ieee80211_sta_work
);
1675 INIT_WORK(&ifmgd
->monitor_work
, ieee80211_sta_monitor_work
);
1676 INIT_WORK(&ifmgd
->chswitch_work
, ieee80211_chswitch_work
);
1677 INIT_WORK(&ifmgd
->beacon_loss_work
, ieee80211_beacon_loss_work
);
1678 setup_timer(&ifmgd
->timer
, ieee80211_sta_timer
,
1679 (unsigned long) sdata
);
1680 setup_timer(&ifmgd
->bcn_mon_timer
, ieee80211_sta_bcn_mon_timer
,
1681 (unsigned long) sdata
);
1682 setup_timer(&ifmgd
->conn_mon_timer
, ieee80211_sta_conn_mon_timer
,
1683 (unsigned long) sdata
);
1684 setup_timer(&ifmgd
->chswitch_timer
, ieee80211_chswitch_timer
,
1685 (unsigned long) sdata
);
1686 skb_queue_head_init(&ifmgd
->skb_queue
);
1690 mutex_init(&ifmgd
->mtx
);
1692 if (sdata
->local
->hw
.flags
& IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS
)
1693 ifmgd
->req_smps
= IEEE80211_SMPS_AUTOMATIC
;
1695 ifmgd
->req_smps
= IEEE80211_SMPS_OFF
;
1698 /* scan finished notification */
1699 void ieee80211_mlme_notify_scan_completed(struct ieee80211_local
*local
)
1701 struct ieee80211_sub_if_data
*sdata
= local
->scan_sdata
;
1703 /* Restart STA timers */
1705 list_for_each_entry_rcu(sdata
, &local
->interfaces
, list
)
1706 ieee80211_restart_sta_timer(sdata
);
1710 int ieee80211_max_network_latency(struct notifier_block
*nb
,
1711 unsigned long data
, void *dummy
)
1713 s32 latency_usec
= (s32
) data
;
1714 struct ieee80211_local
*local
=
1715 container_of(nb
, struct ieee80211_local
,
1716 network_latency_notifier
);
1718 mutex_lock(&local
->iflist_mtx
);
1719 ieee80211_recalc_ps(local
, latency_usec
);
1720 mutex_unlock(&local
->iflist_mtx
);
1726 static enum work_done_result
1727 ieee80211_probe_auth_done(struct ieee80211_work
*wk
,
1728 struct sk_buff
*skb
)
1731 cfg80211_send_auth_timeout(wk
->sdata
->dev
, wk
->filter_ta
);
1732 return WORK_DONE_DESTROY
;
1735 if (wk
->type
== IEEE80211_WORK_AUTH
) {
1736 cfg80211_send_rx_auth(wk
->sdata
->dev
, skb
->data
, skb
->len
);
1737 return WORK_DONE_DESTROY
;
1740 mutex_lock(&wk
->sdata
->u
.mgd
.mtx
);
1741 ieee80211_rx_mgmt_probe_resp(wk
->sdata
, skb
);
1742 mutex_unlock(&wk
->sdata
->u
.mgd
.mtx
);
1744 wk
->type
= IEEE80211_WORK_AUTH
;
1745 wk
->probe_auth
.tries
= 0;
1746 return WORK_DONE_REQUEUE
;
1749 int ieee80211_mgd_auth(struct ieee80211_sub_if_data
*sdata
,
1750 struct cfg80211_auth_request
*req
)
1753 struct ieee80211_work
*wk
;
1756 switch (req
->auth_type
) {
1757 case NL80211_AUTHTYPE_OPEN_SYSTEM
:
1758 auth_alg
= WLAN_AUTH_OPEN
;
1760 case NL80211_AUTHTYPE_SHARED_KEY
:
1761 auth_alg
= WLAN_AUTH_SHARED_KEY
;
1763 case NL80211_AUTHTYPE_FT
:
1764 auth_alg
= WLAN_AUTH_FT
;
1766 case NL80211_AUTHTYPE_NETWORK_EAP
:
1767 auth_alg
= WLAN_AUTH_LEAP
;
1773 wk
= kzalloc(sizeof(*wk
) + req
->ie_len
, GFP_KERNEL
);
1777 memcpy(wk
->filter_ta
, req
->bss
->bssid
, ETH_ALEN
);;
1779 if (req
->ie
&& req
->ie_len
) {
1780 memcpy(wk
->ie
, req
->ie
, req
->ie_len
);
1781 wk
->ie_len
= req
->ie_len
;
1784 if (req
->key
&& req
->key_len
) {
1785 wk
->probe_auth
.key_len
= req
->key_len
;
1786 wk
->probe_auth
.key_idx
= req
->key_idx
;
1787 memcpy(wk
->probe_auth
.key
, req
->key
, req
->key_len
);
1790 ssid
= ieee80211_bss_get_ie(req
->bss
, WLAN_EID_SSID
);
1791 memcpy(wk
->probe_auth
.ssid
, ssid
+ 2, ssid
[1]);
1792 wk
->probe_auth
.ssid_len
= ssid
[1];
1794 wk
->probe_auth
.algorithm
= auth_alg
;
1795 wk
->probe_auth
.privacy
= req
->bss
->capability
& WLAN_CAPABILITY_PRIVACY
;
1797 wk
->type
= IEEE80211_WORK_DIRECT_PROBE
;
1798 wk
->chan
= req
->bss
->channel
;
1800 wk
->done
= ieee80211_probe_auth_done
;
1802 ieee80211_add_work(wk
);
1806 static enum work_done_result
ieee80211_assoc_done(struct ieee80211_work
*wk
,
1807 struct sk_buff
*skb
)
1809 struct ieee80211_mgmt
*mgmt
;
1813 cfg80211_send_assoc_timeout(wk
->sdata
->dev
, wk
->filter_ta
);
1814 return WORK_DONE_DESTROY
;
1817 mgmt
= (void *)skb
->data
;
1818 status
= le16_to_cpu(mgmt
->u
.assoc_resp
.status_code
);
1820 if (status
== WLAN_STATUS_SUCCESS
) {
1821 mutex_lock(&wk
->sdata
->u
.mgd
.mtx
);
1822 if (!ieee80211_assoc_success(wk
, mgmt
, skb
->len
)) {
1823 mutex_unlock(&wk
->sdata
->u
.mgd
.mtx
);
1824 /* oops -- internal error -- send timeout for now */
1825 cfg80211_send_assoc_timeout(wk
->sdata
->dev
,
1827 return WORK_DONE_DESTROY
;
1829 mutex_unlock(&wk
->sdata
->u
.mgd
.mtx
);
1832 cfg80211_send_rx_assoc(wk
->sdata
->dev
, skb
->data
, skb
->len
);
1833 return WORK_DONE_DESTROY
;
1836 int ieee80211_mgd_assoc(struct ieee80211_sub_if_data
*sdata
,
1837 struct cfg80211_assoc_request
*req
)
1839 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1840 struct ieee80211_bss
*bss
= (void *)req
->bss
->priv
;
1841 struct ieee80211_work
*wk
;
1845 mutex_lock(&ifmgd
->mtx
);
1846 if (ifmgd
->associated
) {
1847 mutex_unlock(&ifmgd
->mtx
);
1850 mutex_unlock(&ifmgd
->mtx
);
1852 wk
= kzalloc(sizeof(*wk
) + req
->ie_len
, GFP_KERNEL
);
1856 ifmgd
->flags
&= ~IEEE80211_STA_DISABLE_11N
;
1858 for (i
= 0; i
< req
->crypto
.n_ciphers_pairwise
; i
++)
1859 if (req
->crypto
.ciphers_pairwise
[i
] == WLAN_CIPHER_SUITE_WEP40
||
1860 req
->crypto
.ciphers_pairwise
[i
] == WLAN_CIPHER_SUITE_TKIP
||
1861 req
->crypto
.ciphers_pairwise
[i
] == WLAN_CIPHER_SUITE_WEP104
)
1862 ifmgd
->flags
|= IEEE80211_STA_DISABLE_11N
;
1865 if (req
->ie
&& req
->ie_len
) {
1866 memcpy(wk
->ie
, req
->ie
, req
->ie_len
);
1867 wk
->ie_len
= req
->ie_len
;
1871 wk
->assoc
.bss
= req
->bss
;
1873 memcpy(wk
->filter_ta
, req
->bss
->bssid
, ETH_ALEN
);
1875 /* new association always uses requested smps mode */
1876 if (ifmgd
->req_smps
== IEEE80211_SMPS_AUTOMATIC
) {
1877 if (ifmgd
->powersave
)
1878 ifmgd
->ap_smps
= IEEE80211_SMPS_DYNAMIC
;
1880 ifmgd
->ap_smps
= IEEE80211_SMPS_OFF
;
1882 ifmgd
->ap_smps
= ifmgd
->req_smps
;
1884 wk
->assoc
.smps
= ifmgd
->ap_smps
;
1886 * IEEE802.11n does not allow TKIP/WEP as pairwise ciphers in HT mode.
1887 * We still associate in non-HT mode (11a/b/g) if any one of these
1888 * ciphers is configured as pairwise.
1889 * We can set this to true for non-11n hardware, that'll be checked
1890 * separately along with the peer capabilities.
1892 wk
->assoc
.use_11n
= !(ifmgd
->flags
& IEEE80211_STA_DISABLE_11N
);
1893 wk
->assoc
.capability
= req
->bss
->capability
;
1894 wk
->assoc
.wmm_used
= bss
->wmm_used
;
1895 wk
->assoc
.supp_rates
= bss
->supp_rates
;
1896 wk
->assoc
.supp_rates_len
= bss
->supp_rates_len
;
1897 wk
->assoc
.ht_information_ie
=
1898 ieee80211_bss_get_ie(req
->bss
, WLAN_EID_HT_INFORMATION
);
1900 ssid
= ieee80211_bss_get_ie(req
->bss
, WLAN_EID_SSID
);
1901 memcpy(wk
->assoc
.ssid
, ssid
+ 2, ssid
[1]);
1902 wk
->assoc
.ssid_len
= ssid
[1];
1904 if (req
->prev_bssid
)
1905 memcpy(wk
->assoc
.prev_bssid
, req
->prev_bssid
, ETH_ALEN
);
1907 wk
->type
= IEEE80211_WORK_ASSOC
;
1908 wk
->chan
= req
->bss
->channel
;
1910 wk
->done
= ieee80211_assoc_done
;
1913 ifmgd
->mfp
= IEEE80211_MFP_REQUIRED
;
1914 ifmgd
->flags
|= IEEE80211_STA_MFP_ENABLED
;
1916 ifmgd
->mfp
= IEEE80211_MFP_DISABLED
;
1917 ifmgd
->flags
&= ~IEEE80211_STA_MFP_ENABLED
;
1920 if (req
->crypto
.control_port
)
1921 ifmgd
->flags
|= IEEE80211_STA_CONTROL_PORT
;
1923 ifmgd
->flags
&= ~IEEE80211_STA_CONTROL_PORT
;
1925 ieee80211_add_work(wk
);
1929 int ieee80211_mgd_deauth(struct ieee80211_sub_if_data
*sdata
,
1930 struct cfg80211_deauth_request
*req
,
1933 struct ieee80211_local
*local
= sdata
->local
;
1934 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1935 struct ieee80211_work
*wk
;
1936 const u8
*bssid
= req
->bss
->bssid
;
1938 mutex_lock(&ifmgd
->mtx
);
1940 if (ifmgd
->associated
== req
->bss
) {
1941 bssid
= req
->bss
->bssid
;
1942 ieee80211_set_disassoc(sdata
);
1943 mutex_unlock(&ifmgd
->mtx
);
1945 bool not_auth_yet
= false;
1947 mutex_unlock(&ifmgd
->mtx
);
1949 mutex_lock(&local
->work_mtx
);
1950 list_for_each_entry(wk
, &local
->work_list
, list
) {
1951 if (wk
->type
!= IEEE80211_WORK_DIRECT_PROBE
)
1953 if (memcmp(req
->bss
->bssid
, wk
->filter_ta
, ETH_ALEN
))
1955 not_auth_yet
= true;
1956 list_del(&wk
->list
);
1960 mutex_unlock(&local
->work_mtx
);
1963 * If somebody requests authentication and we haven't
1964 * sent out an auth frame yet there's no need to send
1965 * out a deauth frame either. If the state was PROBE,
1966 * then this is the case. If it's AUTH we have sent a
1967 * frame, and if it's IDLE we have completed the auth
1971 __cfg80211_auth_canceled(sdata
->dev
, bssid
);
1976 printk(KERN_DEBUG
"%s: deauthenticating from %pM by local choice (reason=%d)\n",
1977 sdata
->name
, bssid
, req
->reason_code
);
1979 ieee80211_send_deauth_disassoc(sdata
, bssid
,
1980 IEEE80211_STYPE_DEAUTH
, req
->reason_code
,
1983 ieee80211_recalc_idle(sdata
->local
);
1988 int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data
*sdata
,
1989 struct cfg80211_disassoc_request
*req
,
1992 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1994 mutex_lock(&ifmgd
->mtx
);
1997 * cfg80211 should catch this ... but it's racy since
1998 * we can receive a disassoc frame, process it, hand it
1999 * to cfg80211 while that's in a locked section already
2000 * trying to tell us that the user wants to disconnect.
2002 if (ifmgd
->associated
!= req
->bss
) {
2003 mutex_unlock(&ifmgd
->mtx
);
2007 printk(KERN_DEBUG
"%s: disassociating from %pM by local choice (reason=%d)\n",
2008 sdata
->name
, req
->bss
->bssid
, req
->reason_code
);
2010 ieee80211_set_disassoc(sdata
);
2012 mutex_unlock(&ifmgd
->mtx
);
2014 ieee80211_send_deauth_disassoc(sdata
, req
->bss
->bssid
,
2015 IEEE80211_STYPE_DISASSOC
, req
->reason_code
,
2018 ieee80211_recalc_idle(sdata
->local
);