?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
cfq-iosched: fix locking around ioc->ioc_data assignment
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / usb / musb / musb_host.c
blob877d20b1dff973fd6975f258bb0b18267df1f5f5
1 /*
2 * MUSB OTG driver host support
3 *
4 * Copyright 2005 Mentor Graphics Corporation
5 * Copyright (C) 2005-2006 by Texas Instruments
6 * Copyright (C) 2006-2007 Nokia Corporation
7 * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
8 *
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License
11 * version 2 as published by the Free Software Foundation.
12 *
13 * This program is distributed in the hope that it will be useful, but
14 * WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16 * General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
21 * 02110-1301 USA
22 *
23 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
24 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
25 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
26 * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
27 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
28 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
29 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
30 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
32 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 *
34 */
35
36 #include <linux/module.h>
37 #include <linux/kernel.h>
38 #include <linux/delay.h>
39 #include <linux/sched.h>
40 #include <linux/slab.h>
41 #include <linux/errno.h>
42 #include <linux/init.h>
43 #include <linux/list.h>
44
45 #include "musb_core.h"
46 #include "musb_host.h"
47
48
49 /* MUSB HOST status 22-mar-2006
50 *
51 * - There's still lots of partial code duplication for fault paths, so
52 * they aren't handled as consistently as they need to be.
53 *
54 * - PIO mostly behaved when last tested.
55 * + including ep0, with all usbtest cases 9, 10
56 * + usbtest 14 (ep0out) doesn't seem to run at all
57 * + double buffered OUT/TX endpoints saw stalls(!) with certain usbtest
58 * configurations, but otherwise double buffering passes basic tests.
59 * + for 2.6.N, for N > ~10, needs API changes for hcd framework.
60 *
61 * - DMA (CPPI) ... partially behaves, not currently recommended
62 * + about 1/15 the speed of typical EHCI implementations (PCI)
63 * + RX, all too often reqpkt seems to misbehave after tx
64 * + TX, no known issues (other than evident silicon issue)
65 *
66 * - DMA (Mentor/OMAP) ...has at least toggle update problems
67 *
68 * - [23-feb-2009] minimal traffic scheduling to avoid bulk RX packet
69 * starvation ... nothing yet for TX, interrupt, or bulk.
70 *
71 * - Not tested with HNP, but some SRP paths seem to behave.
72 *
73 * NOTE 24-August-2006:
74 *
75 * - Bulk traffic finally uses both sides of hardware ep1, freeing up an
76 * extra endpoint for periodic use enabling hub + keybd + mouse. That
77 * mostly works, except that with "usbnet" it's easy to trigger cases
78 * with "ping" where RX loses. (a) ping to davinci, even "ping -f",
79 * fine; but (b) ping _from_ davinci, even "ping -c 1", ICMP RX loses
80 * although ARP RX wins. (That test was done with a full speed link.)
81 */
82
83
84 /*
85 * NOTE on endpoint usage:
86 *
87 * CONTROL transfers all go through ep0. BULK ones go through dedicated IN
88 * and OUT endpoints ... hardware is dedicated for those "async" queue(s).
89 * (Yes, bulk _could_ use more of the endpoints than that, and would even
90 * benefit from it.)
91 *
92 * INTERUPPT and ISOCHRONOUS transfers are scheduled to the other endpoints.
93 * So far that scheduling is both dumb and optimistic: the endpoint will be
94 * "claimed" until its software queue is no longer refilled. No multiplexing
95 * of transfers between endpoints, or anything clever.
96 */
97
98
99 static void musb_ep_program(struct musb *musb, u8 epnum,
100 struct urb *urb, int is_out,
101 u8 *buf, u32 offset, u32 len);
102
103 /*
104 * Clear TX fifo. Needed to avoid BABBLE errors.
105 */
106 static void musb_h_tx_flush_fifo(struct musb_hw_ep *ep)
107 {
108 void __iomem *epio = ep->regs;
109 u16 csr;
110 u16 lastcsr = 0;
111 int retries = 1000;
112
113 csr = musb_readw(epio, MUSB_TXCSR);
114 while (csr & MUSB_TXCSR_FIFONOTEMPTY) {
115 if (csr != lastcsr)
116 DBG(3, "Host TX FIFONOTEMPTY csr: %02x\n", csr);
117 lastcsr = csr;
118 csr |= MUSB_TXCSR_FLUSHFIFO;
119 musb_writew(epio, MUSB_TXCSR, csr);
120 csr = musb_readw(epio, MUSB_TXCSR);
121 if (WARN(retries-- < 1,
122 "Could not flush host TX%d fifo: csr: %04x\n",
123 ep->epnum, csr))
124 return;
125 mdelay(1);
126 }
127 }
128
129 static void musb_h_ep0_flush_fifo(struct musb_hw_ep *ep)
130 {
131 void __iomem *epio = ep->regs;
132 u16 csr;
133 int retries = 5;
134
135 /* scrub any data left in the fifo */
136 do {
137 csr = musb_readw(epio, MUSB_TXCSR);
138 if (!(csr & (MUSB_CSR0_TXPKTRDY | MUSB_CSR0_RXPKTRDY)))
139 break;
140 musb_writew(epio, MUSB_TXCSR, MUSB_CSR0_FLUSHFIFO);
141 csr = musb_readw(epio, MUSB_TXCSR);
142 udelay(10);
143 } while (--retries);
144
145 WARN(!retries, "Could not flush host TX%d fifo: csr: %04x\n",
146 ep->epnum, csr);
147
148 /* and reset for the next transfer */
149 musb_writew(epio, MUSB_TXCSR, 0);
150 }
151
152 /*
153 * Start transmit. Caller is responsible for locking shared resources.
154 * musb must be locked.
155 */
156 static inline void musb_h_tx_start(struct musb_hw_ep *ep)
157 {
158 u16 txcsr;
159
160 /* NOTE: no locks here; caller should lock and select EP */
161 if (ep->epnum) {
162 txcsr = musb_readw(ep->regs, MUSB_TXCSR);
163 txcsr |= MUSB_TXCSR_TXPKTRDY | MUSB_TXCSR_H_WZC_BITS;
164 musb_writew(ep->regs, MUSB_TXCSR, txcsr);
165 } else {
166 txcsr = MUSB_CSR0_H_SETUPPKT | MUSB_CSR0_TXPKTRDY;
167 musb_writew(ep->regs, MUSB_CSR0, txcsr);
168 }
169
170 }
171
172 static inline void musb_h_tx_dma_start(struct musb_hw_ep *ep)
173 {
174 u16 txcsr;
175
176 /* NOTE: no locks here; caller should lock and select EP */
177 txcsr = musb_readw(ep->regs, MUSB_TXCSR);
178 txcsr |= MUSB_TXCSR_DMAENAB | MUSB_TXCSR_H_WZC_BITS;
179 if (is_cppi_enabled())
180 txcsr |= MUSB_TXCSR_DMAMODE;
181 musb_writew(ep->regs, MUSB_TXCSR, txcsr);
182 }
183
184 static void musb_ep_set_qh(struct musb_hw_ep *ep, int is_in, struct musb_qh *qh)
185 {
186 if (is_in != 0 || ep->is_shared_fifo)
187 ep->in_qh = qh;
188 if (is_in == 0 || ep->is_shared_fifo)
189 ep->out_qh = qh;
190 }
191
192 static struct musb_qh *musb_ep_get_qh(struct musb_hw_ep *ep, int is_in)
193 {
194 return is_in ? ep->in_qh : ep->out_qh;
195 }
196
197 /*
198 * Start the URB at the front of an endpoint's queue
199 * end must be claimed from the caller.
200 *
201 * Context: controller locked, irqs blocked
202 */
203 static void
204 musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
205 {
206 u16 frame;
207 u32 len;
208 void __iomem *mbase = musb->mregs;
209 struct urb *urb = next_urb(qh);
210 void *buf = urb->transfer_buffer;
211 u32 offset = 0;
212 struct musb_hw_ep *hw_ep = qh->hw_ep;
213 unsigned pipe = urb->pipe;
214 u8 address = usb_pipedevice(pipe);
215 int epnum = hw_ep->epnum;
216
217 /* initialize software qh state */
218 qh->offset = 0;
219 qh->segsize = 0;
220
221 /* gather right source of data */
222 switch (qh->type) {
223 case USB_ENDPOINT_XFER_CONTROL:
224 /* control transfers always start with SETUP */
225 is_in = 0;
226 musb->ep0_stage = MUSB_EP0_START;
227 buf = urb->setup_packet;
228 len = 8;
229 break;
230 case USB_ENDPOINT_XFER_ISOC:
231 qh->iso_idx = 0;
232 qh->frame = 0;
233 offset = urb->iso_frame_desc[0].offset;
234 len = urb->iso_frame_desc[0].length;
235 break;
236 default: /* bulk, interrupt */
237 /* actual_length may be nonzero on retry paths */
238 buf = urb->transfer_buffer + urb->actual_length;
239 len = urb->transfer_buffer_length - urb->actual_length;
240 }
241
242 DBG(4, "qh %p urb %p dev%d ep%d%s%s, hw_ep %d, %p/%d\n",
243 qh, urb, address, qh->epnum,
244 is_in ? "in" : "out",
245 ({char *s; switch (qh->type) {
246 case USB_ENDPOINT_XFER_CONTROL: s = ""; break;
247 case USB_ENDPOINT_XFER_BULK: s = "-bulk"; break;
248 case USB_ENDPOINT_XFER_ISOC: s = "-iso"; break;
249 default: s = "-intr"; break;
250 }; s; }),
251 epnum, buf + offset, len);
252
253 /* Configure endpoint */
254 musb_ep_set_qh(hw_ep, is_in, qh);
255 musb_ep_program(musb, epnum, urb, !is_in, buf, offset, len);
256
257 /* transmit may have more work: start it when it is time */
258 if (is_in)
259 return;
260
261 /* determine if the time is right for a periodic transfer */
262 switch (qh->type) {
263 case USB_ENDPOINT_XFER_ISOC:
264 case USB_ENDPOINT_XFER_INT:
265 DBG(3, "check whether there's still time for periodic Tx\n");
266 frame = musb_readw(mbase, MUSB_FRAME);
267 /* FIXME this doesn't implement that scheduling policy ...
268 * or handle framecounter wrapping
269 */
270 if ((urb->transfer_flags & URB_ISO_ASAP)
271 || (frame >= urb->start_frame)) {
272 /* REVISIT the SOF irq handler shouldn't duplicate
273 * this code; and we don't init urb->start_frame...
274 */
275 qh->frame = 0;
276 goto start;
277 } else {
278 qh->frame = urb->start_frame;
279 /* enable SOF interrupt so we can count down */
280 DBG(1, "SOF for %d\n", epnum);
281 #if 1 /* ifndef CONFIG_ARCH_DAVINCI */
282 musb_writeb(mbase, MUSB_INTRUSBE, 0xff);
283 #endif
284 }
285 break;
286 default:
287 start:
288 DBG(4, "Start TX%d %s\n", epnum,
289 hw_ep->tx_channel ? "dma" : "pio");
290
291 if (!hw_ep->tx_channel)
292 musb_h_tx_start(hw_ep);
293 else if (is_cppi_enabled() || tusb_dma_omap())
294 musb_h_tx_dma_start(hw_ep);
295 }
296 }
297
298 /* Context: caller owns controller lock, IRQs are blocked */
299 static void musb_giveback(struct musb *musb, struct urb *urb, int status)
300 __releases(musb->lock)
301 __acquires(musb->lock)
302 {
303 DBG(({ int level; switch (status) {
304 case 0:
305 level = 4;
306 break;
307 /* common/boring faults */
308 case -EREMOTEIO:
309 case -ESHUTDOWN:
310 case -ECONNRESET:
311 case -EPIPE:
312 level = 3;
313 break;
314 default:
315 level = 2;
316 break;
317 }; level; }),
318 "complete %p %pF (%d), dev%d ep%d%s, %d/%d\n",
319 urb, urb->complete, status,
320 usb_pipedevice(urb->pipe),
321 usb_pipeendpoint(urb->pipe),
322 usb_pipein(urb->pipe) ? "in" : "out",
323 urb->actual_length, urb->transfer_buffer_length
324 );
325
326 usb_hcd_unlink_urb_from_ep(musb_to_hcd(musb), urb);
327 spin_unlock(&musb->lock);
328 usb_hcd_giveback_urb(musb_to_hcd(musb), urb, status);
329 spin_lock(&musb->lock);
330 }
331
332 /* For bulk/interrupt endpoints only */
333 static inline void musb_save_toggle(struct musb_qh *qh, int is_in,
334 struct urb *urb)
335 {
336 void __iomem *epio = qh->hw_ep->regs;
337 u16 csr;
338
339 /*
340 * FIXME: the current Mentor DMA code seems to have
341 * problems getting toggle correct.
342 */
343
344 if (is_in)
345 csr = musb_readw(epio, MUSB_RXCSR) & MUSB_RXCSR_H_DATATOGGLE;
346 else
347 csr = musb_readw(epio, MUSB_TXCSR) & MUSB_TXCSR_H_DATATOGGLE;
348
349 usb_settoggle(urb->dev, qh->epnum, !is_in, csr ? 1 : 0);
350 }
351
352 /*
353 * Advance this hardware endpoint's queue, completing the specified URB and
354 * advancing to either the next URB queued to that qh, or else invalidating
355 * that qh and advancing to the next qh scheduled after the current one.
356 *
357 * Context: caller owns controller lock, IRQs are blocked
358 */
359 static void musb_advance_schedule(struct musb *musb, struct urb *urb,
360 struct musb_hw_ep *hw_ep, int is_in)
361 {
362 struct musb_qh *qh = musb_ep_get_qh(hw_ep, is_in);
363 struct musb_hw_ep *ep = qh->hw_ep;
364 int ready = qh->is_ready;
365 int status;
366
367 status = (urb->status == -EINPROGRESS) ? 0 : urb->status;
368
369 /* save toggle eagerly, for paranoia */
370 switch (qh->type) {
371 case USB_ENDPOINT_XFER_BULK:
372 case USB_ENDPOINT_XFER_INT:
373 musb_save_toggle(qh, is_in, urb);
374 break;
375 case USB_ENDPOINT_XFER_ISOC:
376 if (status == 0 && urb->error_count)
377 status = -EXDEV;
378 break;
379 }
380
381 qh->is_ready = 0;
382 musb_giveback(musb, urb, status);
383 qh->is_ready = ready;
384
385 /* reclaim resources (and bandwidth) ASAP; deschedule it, and
386 * invalidate qh as soon as list_empty(&hep->urb_list)
387 */
388 if (list_empty(&qh->hep->urb_list)) {
389 struct list_head *head;
390
391 if (is_in)
392 ep->rx_reinit = 1;
393 else
394 ep->tx_reinit = 1;
395
396 /* Clobber old pointers to this qh */
397 musb_ep_set_qh(ep, is_in, NULL);
398 qh->hep->hcpriv = NULL;
399
400 switch (qh->type) {
401
402 case USB_ENDPOINT_XFER_CONTROL:
403 case USB_ENDPOINT_XFER_BULK:
404 /* fifo policy for these lists, except that NAKing
405 * should rotate a qh to the end (for fairness).
406 */
407 if (qh->mux == 1) {
408 head = qh->ring.prev;
409 list_del(&qh->ring);
410 kfree(qh);
411 qh = first_qh(head);
412 break;
413 }
414
415 case USB_ENDPOINT_XFER_ISOC:
416 case USB_ENDPOINT_XFER_INT:
417 /* this is where periodic bandwidth should be
418 * de-allocated if it's tracked and allocated;
419 * and where we'd update the schedule tree...
420 */
421 kfree(qh);
422 qh = NULL;
423 break;
424 }
425 }
426
427 if (qh != NULL && qh->is_ready) {
428 DBG(4, "... next ep%d %cX urb %p\n",
429 hw_ep->epnum, is_in ? 'R' : 'T', next_urb(qh));
430 musb_start_urb(musb, is_in, qh);
431 }
432 }
433
434 static u16 musb_h_flush_rxfifo(struct musb_hw_ep *hw_ep, u16 csr)
435 {
436 /* we don't want fifo to fill itself again;
437 * ignore dma (various models),
438 * leave toggle alone (may not have been saved yet)
439 */
440 csr |= MUSB_RXCSR_FLUSHFIFO | MUSB_RXCSR_RXPKTRDY;
441 csr &= ~(MUSB_RXCSR_H_REQPKT
442 | MUSB_RXCSR_H_AUTOREQ
443 | MUSB_RXCSR_AUTOCLEAR);
444
445 /* write 2x to allow double buffering */
446 musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
447 musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
448
449 /* flush writebuffer */
450 return musb_readw(hw_ep->regs, MUSB_RXCSR);
451 }
452
453 /*
454 * PIO RX for a packet (or part of it).
455 */
456 static bool
457 musb_host_packet_rx(struct musb *musb, struct urb *urb, u8 epnum, u8 iso_err)
458 {
459 u16 rx_count;
460 u8 *buf;
461 u16 csr;
462 bool done = false;
463 u32 length;
464 int do_flush = 0;
465 struct musb_hw_ep *hw_ep = musb->endpoints + epnum;
466 void __iomem *epio = hw_ep->regs;
467 struct musb_qh *qh = hw_ep->in_qh;
468 int pipe = urb->pipe;
469 void *buffer = urb->transfer_buffer;
470
471 /* musb_ep_select(mbase, epnum); */
472 rx_count = musb_readw(epio, MUSB_RXCOUNT);
473 DBG(3, "RX%d count %d, buffer %p len %d/%d\n", epnum, rx_count,
474 urb->transfer_buffer, qh->offset,
475 urb->transfer_buffer_length);
476
477 /* unload FIFO */
478 if (usb_pipeisoc(pipe)) {
479 int status = 0;
480 struct usb_iso_packet_descriptor *d;
481
482 if (iso_err) {
483 status = -EILSEQ;
484 urb->error_count++;
485 }
486
487 d = urb->iso_frame_desc + qh->iso_idx;
488 buf = buffer + d->offset;
489 length = d->length;
490 if (rx_count > length) {
491 if (status == 0) {
492 status = -EOVERFLOW;
493 urb->error_count++;
494 }
495 DBG(2, "** OVERFLOW %d into %d\n", rx_count, length);
496 do_flush = 1;
497 } else
498 length = rx_count;
499 urb->actual_length += length;
500 d->actual_length = length;
501
502 d->status = status;
503
504 /* see if we are done */
505 done = (++qh->iso_idx >= urb->number_of_packets);
506 } else {
507 /* non-isoch */
508 buf = buffer + qh->offset;
509 length = urb->transfer_buffer_length - qh->offset;
510 if (rx_count > length) {
511 if (urb->status == -EINPROGRESS)
512 urb->status = -EOVERFLOW;
513 DBG(2, "** OVERFLOW %d into %d\n", rx_count, length);
514 do_flush = 1;
515 } else
516 length = rx_count;
517 urb->actual_length += length;
518 qh->offset += length;
519
520 /* see if we are done */
521 done = (urb->actual_length == urb->transfer_buffer_length)
522 || (rx_count < qh->maxpacket)
523 || (urb->status != -EINPROGRESS);
524 if (done
525 && (urb->status == -EINPROGRESS)
526 && (urb->transfer_flags & URB_SHORT_NOT_OK)
527 && (urb->actual_length
528 < urb->transfer_buffer_length))
529 urb->status = -EREMOTEIO;
530 }
531
532 musb_read_fifo(hw_ep, length, buf);
533
534 csr = musb_readw(epio, MUSB_RXCSR);
535 csr |= MUSB_RXCSR_H_WZC_BITS;
536 if (unlikely(do_flush))
537 musb_h_flush_rxfifo(hw_ep, csr);
538 else {
539 /* REVISIT this assumes AUTOCLEAR is never set */
540 csr &= ~(MUSB_RXCSR_RXPKTRDY | MUSB_RXCSR_H_REQPKT);
541 if (!done)
542 csr |= MUSB_RXCSR_H_REQPKT;
543 musb_writew(epio, MUSB_RXCSR, csr);
544 }
545
546 return done;
547 }
548
549 /* we don't always need to reinit a given side of an endpoint...
550 * when we do, use tx/rx reinit routine and then construct a new CSR
551 * to address data toggle, NYET, and DMA or PIO.
552 *
553 * it's possible that driver bugs (especially for DMA) or aborting a
554 * transfer might have left the endpoint busier than it should be.
555 * the busy/not-empty tests are basically paranoia.
556 */
557 static void
558 musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep)
559 {
560 u16 csr;
561
562 /* NOTE: we know the "rx" fifo reinit never triggers for ep0.
563 * That always uses tx_reinit since ep0 repurposes TX register
564 * offsets; the initial SETUP packet is also a kind of OUT.
565 */
566
567 /* if programmed for Tx, put it in RX mode */
568 if (ep->is_shared_fifo) {
569 csr = musb_readw(ep->regs, MUSB_TXCSR);
570 if (csr & MUSB_TXCSR_MODE) {
571 musb_h_tx_flush_fifo(ep);
572 csr = musb_readw(ep->regs, MUSB_TXCSR);
573 musb_writew(ep->regs, MUSB_TXCSR,
574 csr | MUSB_TXCSR_FRCDATATOG);
575 }
576
577 /*
578 * Clear the MODE bit (and everything else) to enable Rx.
579 * NOTE: we mustn't clear the DMAMODE bit before DMAENAB.
580 */
581 if (csr & MUSB_TXCSR_DMAMODE)
582 musb_writew(ep->regs, MUSB_TXCSR, MUSB_TXCSR_DMAMODE);
583 musb_writew(ep->regs, MUSB_TXCSR, 0);
584
585 /* scrub all previous state, clearing toggle */
586 } else {
587 csr = musb_readw(ep->regs, MUSB_RXCSR);
588 if (csr & MUSB_RXCSR_RXPKTRDY)
589 WARNING("rx%d, packet/%d ready?\n", ep->epnum,
590 musb_readw(ep->regs, MUSB_RXCOUNT));
591
592 musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG);
593 }
594
595 /* target addr and (for multipoint) hub addr/port */
596 if (musb->is_multipoint) {
597 musb_write_rxfunaddr(ep->target_regs, qh->addr_reg);
598 musb_write_rxhubaddr(ep->target_regs, qh->h_addr_reg);
599 musb_write_rxhubport(ep->target_regs, qh->h_port_reg);
600
601 } else
602 musb_writeb(musb->mregs, MUSB_FADDR, qh->addr_reg);
603
604 /* protocol/endpoint, interval/NAKlimit, i/o size */
605 musb_writeb(ep->regs, MUSB_RXTYPE, qh->type_reg);
606 musb_writeb(ep->regs, MUSB_RXINTERVAL, qh->intv_reg);
607 /* NOTE: bulk combining rewrites high bits of maxpacket */
608 /* Set RXMAXP with the FIFO size of the endpoint
609 * to disable double buffer mode.
610 */
611 if (musb->hwvers < MUSB_HWVERS_2000)
612 musb_writew(ep->regs, MUSB_RXMAXP, ep->max_packet_sz_rx);
613 else
614 musb_writew(ep->regs, MUSB_RXMAXP,
615 qh->maxpacket | ((qh->hb_mult - 1) << 11));
616
617 ep->rx_reinit = 0;
618 }
619
620 static bool musb_tx_dma_program(struct dma_controller *dma,
621 struct musb_hw_ep *hw_ep, struct musb_qh *qh,
622 struct urb *urb, u32 offset, u32 length)
623 {
624 struct dma_channel *channel = hw_ep->tx_channel;
625 void __iomem *epio = hw_ep->regs;
626 u16 pkt_size = qh->maxpacket;
627 u16 csr;
628 u8 mode;
629
630 #ifdef CONFIG_USB_INVENTRA_DMA
631 if (length > channel->max_len)
632 length = channel->max_len;
633
634 csr = musb_readw(epio, MUSB_TXCSR);
635 if (length > pkt_size) {
636 mode = 1;
637 csr |= MUSB_TXCSR_DMAMODE | MUSB_TXCSR_DMAENAB;
638 /* autoset shouldn't be set in high bandwidth */
639 if (qh->hb_mult == 1)
640 csr |= MUSB_TXCSR_AUTOSET;
641 } else {
642 mode = 0;
643 csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAMODE);
644 csr |= MUSB_TXCSR_DMAENAB; /* against programmer's guide */
645 }
646 channel->desired_mode = mode;
647 musb_writew(epio, MUSB_TXCSR, csr);
648 #else
649 if (!is_cppi_enabled() && !tusb_dma_omap())
650 return false;
651
652 channel->actual_len = 0;
653
654 /*
655 * TX uses "RNDIS" mode automatically but needs help
656 * to identify the zero-length-final-packet case.
657 */
658 mode = (urb->transfer_flags & URB_ZERO_PACKET) ? 1 : 0;
659 #endif
660
661 qh->segsize = length;
662
663 if (!dma->channel_program(channel, pkt_size, mode,
664 urb->transfer_dma + offset, length)) {
665 dma->channel_release(channel);
666 hw_ep->tx_channel = NULL;
667
668 csr = musb_readw(epio, MUSB_TXCSR);
669 csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB);
670 musb_writew(epio, MUSB_TXCSR, csr | MUSB_TXCSR_H_WZC_BITS);
671 return false;
672 }
673 return true;
674 }
675
676 /*
677 * Program an HDRC endpoint as per the given URB
678 * Context: irqs blocked, controller lock held
679 */
680 static void musb_ep_program(struct musb *musb, u8 epnum,
681 struct urb *urb, int is_out,
682 u8 *buf, u32 offset, u32 len)
683 {
684 struct dma_controller *dma_controller;
685 struct dma_channel *dma_channel;
686 u8 dma_ok;
687 void __iomem *mbase = musb->mregs;
688 struct musb_hw_ep *hw_ep = musb->endpoints + epnum;
689 void __iomem *epio = hw_ep->regs;
690 struct musb_qh *qh = musb_ep_get_qh(hw_ep, !is_out);
691 u16 packet_sz = qh->maxpacket;
692
693 DBG(3, "%s hw%d urb %p spd%d dev%d ep%d%s "
694 "h_addr%02x h_port%02x bytes %d\n",
695 is_out ? "-->" : "<--",
696 epnum, urb, urb->dev->speed,
697 qh->addr_reg, qh->epnum, is_out ? "out" : "in",
698 qh->h_addr_reg, qh->h_port_reg,
699 len);
700
701 musb_ep_select(mbase, epnum);
702
703 /* candidate for DMA? */
704 dma_controller = musb->dma_controller;
705 if (is_dma_capable() && epnum && dma_controller) {
706 dma_channel = is_out ? hw_ep->tx_channel : hw_ep->rx_channel;
707 if (!dma_channel) {
708 dma_channel = dma_controller->channel_alloc(
709 dma_controller, hw_ep, is_out);
710 if (is_out)
711 hw_ep->tx_channel = dma_channel;
712 else
713 hw_ep->rx_channel = dma_channel;
714 }
715 } else
716 dma_channel = NULL;
717
718 /* make sure we clear DMAEnab, autoSet bits from previous run */
719
720 /* OUT/transmit/EP0 or IN/receive? */
721 if (is_out) {
722 u16 csr;
723 u16 int_txe;
724 u16 load_count;
725
726 csr = musb_readw(epio, MUSB_TXCSR);
727
728 /* disable interrupt in case we flush */
729 int_txe = musb_readw(mbase, MUSB_INTRTXE);
730 musb_writew(mbase, MUSB_INTRTXE, int_txe & ~(1 << epnum));
731
732 /* general endpoint setup */
733 if (epnum) {
734 /* flush all old state, set default */
735 musb_h_tx_flush_fifo(hw_ep);
736
737 /*
738 * We must not clear the DMAMODE bit before or in
739 * the same cycle with the DMAENAB bit, so we clear
740 * the latter first...
741 */
742 csr &= ~(MUSB_TXCSR_H_NAKTIMEOUT
743 | MUSB_TXCSR_AUTOSET
744 | MUSB_TXCSR_DMAENAB
745 | MUSB_TXCSR_FRCDATATOG
746 | MUSB_TXCSR_H_RXSTALL
747 | MUSB_TXCSR_H_ERROR
748 | MUSB_TXCSR_TXPKTRDY
749 );
750 csr |= MUSB_TXCSR_MODE;
751
752 if (usb_gettoggle(urb->dev, qh->epnum, 1))
753 csr |= MUSB_TXCSR_H_WR_DATATOGGLE
754 | MUSB_TXCSR_H_DATATOGGLE;
755 else
756 csr |= MUSB_TXCSR_CLRDATATOG;
757
758 musb_writew(epio, MUSB_TXCSR, csr);
759 /* REVISIT may need to clear FLUSHFIFO ... */
760 csr &= ~MUSB_TXCSR_DMAMODE;
761 musb_writew(epio, MUSB_TXCSR, csr);
762 csr = musb_readw(epio, MUSB_TXCSR);
763 } else {
764 /* endpoint 0: just flush */
765 musb_h_ep0_flush_fifo(hw_ep);
766 }
767
768 /* target addr and (for multipoint) hub addr/port */
769 if (musb->is_multipoint) {
770 musb_write_txfunaddr(mbase, epnum, qh->addr_reg);
771 musb_write_txhubaddr(mbase, epnum, qh->h_addr_reg);
772 musb_write_txhubport(mbase, epnum, qh->h_port_reg);
773 /* FIXME if !epnum, do the same for RX ... */
774 } else
775 musb_writeb(mbase, MUSB_FADDR, qh->addr_reg);
776
777 /* protocol/endpoint/interval/NAKlimit */
778 if (epnum) {
779 musb_writeb(epio, MUSB_TXTYPE, qh->type_reg);
780 if (can_bulk_split(musb, qh->type))
781 musb_writew(epio, MUSB_TXMAXP,
782 packet_sz
783 | ((hw_ep->max_packet_sz_tx /
784 packet_sz) - 1) << 11);
785 else
786 musb_writew(epio, MUSB_TXMAXP,
787 packet_sz);
788 musb_writeb(epio, MUSB_TXINTERVAL, qh->intv_reg);
789 } else {
790 musb_writeb(epio, MUSB_NAKLIMIT0, qh->intv_reg);
791 if (musb->is_multipoint)
792 musb_writeb(epio, MUSB_TYPE0,
793 qh->type_reg);
794 }
795
796 if (can_bulk_split(musb, qh->type))
797 load_count = min((u32) hw_ep->max_packet_sz_tx,
798 len);
799 else
800 load_count = min((u32) packet_sz, len);
801
802 if (dma_channel && musb_tx_dma_program(dma_controller,
803 hw_ep, qh, urb, offset, len))
804 load_count = 0;
805
806 if (load_count) {
807 /* PIO to load FIFO */
808 qh->segsize = load_count;
809 musb_write_fifo(hw_ep, load_count, buf);
810 }
811
812 /* re-enable interrupt */
813 musb_writew(mbase, MUSB_INTRTXE, int_txe);
814
815 /* IN/receive */
816 } else {
817 u16 csr;
818
819 if (hw_ep->rx_reinit) {
820 musb_rx_reinit(musb, qh, hw_ep);
821
822 /* init new state: toggle and NYET, maybe DMA later */
823 if (usb_gettoggle(urb->dev, qh->epnum, 0))
824 csr = MUSB_RXCSR_H_WR_DATATOGGLE
825 | MUSB_RXCSR_H_DATATOGGLE;
826 else
827 csr = 0;
828 if (qh->type == USB_ENDPOINT_XFER_INT)
829 csr |= MUSB_RXCSR_DISNYET;
830
831 } else {
832 csr = musb_readw(hw_ep->regs, MUSB_RXCSR);
833
834 if (csr & (MUSB_RXCSR_RXPKTRDY
835 | MUSB_RXCSR_DMAENAB
836 | MUSB_RXCSR_H_REQPKT))
837 ERR("broken !rx_reinit, ep%d csr %04x\n",
838 hw_ep->epnum, csr);
839
840 /* scrub any stale state, leaving toggle alone */
841 csr &= MUSB_RXCSR_DISNYET;
842 }
843
844 /* kick things off */
845
846 if ((is_cppi_enabled() || tusb_dma_omap()) && dma_channel) {
847 /* candidate for DMA */
848 if (dma_channel) {
849 dma_channel->actual_len = 0L;
850 qh->segsize = len;
851
852 /* AUTOREQ is in a DMA register */
853 musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
854 csr = musb_readw(hw_ep->regs,
855 MUSB_RXCSR);
856
857 /* unless caller treats short rx transfers as
858 * errors, we dare not queue multiple transfers.
859 */
860 dma_ok = dma_controller->channel_program(
861 dma_channel, packet_sz,
862 !(urb->transfer_flags
863 & URB_SHORT_NOT_OK),
864 urb->transfer_dma + offset,
865 qh->segsize);
866 if (!dma_ok) {
867 dma_controller->channel_release(
868 dma_channel);
869 hw_ep->rx_channel = NULL;
870 dma_channel = NULL;
871 } else
872 csr |= MUSB_RXCSR_DMAENAB;
873 }
874 }
875
876 csr |= MUSB_RXCSR_H_REQPKT;
877 DBG(7, "RXCSR%d := %04x\n", epnum, csr);
878 musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
879 csr = musb_readw(hw_ep->regs, MUSB_RXCSR);
880 }
881 }
882
883
884 /*
885 * Service the default endpoint (ep0) as host.
886 * Return true until it's time to start the status stage.
887 */
888 static bool musb_h_ep0_continue(struct musb *musb, u16 len, struct urb *urb)
889 {
890 bool more = false;
891 u8 *fifo_dest = NULL;
892 u16 fifo_count = 0;
893 struct musb_hw_ep *hw_ep = musb->control_ep;
894 struct musb_qh *qh = hw_ep->in_qh;
895 struct usb_ctrlrequest *request;
896
897 switch (musb->ep0_stage) {
898 case MUSB_EP0_IN:
899 fifo_dest = urb->transfer_buffer + urb->actual_length;
900 fifo_count = min_t(size_t, len, urb->transfer_buffer_length -
901 urb->actual_length);
902 if (fifo_count < len)
903 urb->status = -EOVERFLOW;
904
905 musb_read_fifo(hw_ep, fifo_count, fifo_dest);
906
907 urb->actual_length += fifo_count;
908 if (len < qh->maxpacket) {
909 /* always terminate on short read; it's
910 * rarely reported as an error.
911 */
912 } else if (urb->actual_length <
913 urb->transfer_buffer_length)
914 more = true;
915 break;
916 case MUSB_EP0_START:
917 request = (struct usb_ctrlrequest *) urb->setup_packet;
918
919 if (!request->wLength) {
920 DBG(4, "start no-DATA\n");
921 break;
922 } else if (request->bRequestType & USB_DIR_IN) {
923 DBG(4, "start IN-DATA\n");
924 musb->ep0_stage = MUSB_EP0_IN;
925 more = true;
926 break;
927 } else {
928 DBG(4, "start OUT-DATA\n");
929 musb->ep0_stage = MUSB_EP0_OUT;
930 more = true;
931 }
932 /* FALLTHROUGH */
933 case MUSB_EP0_OUT:
934 fifo_count = min_t(size_t, qh->maxpacket,
935 urb->transfer_buffer_length -
936 urb->actual_length);
937 if (fifo_count) {
938 fifo_dest = (u8 *) (urb->transfer_buffer
939 + urb->actual_length);
940 DBG(3, "Sending %d byte%s to ep0 fifo %p\n",
941 fifo_count,
942 (fifo_count == 1) ? "" : "s",
943 fifo_dest);
944 musb_write_fifo(hw_ep, fifo_count, fifo_dest);
945
946 urb->actual_length += fifo_count;
947 more = true;
948 }
949 break;
950 default:
951 ERR("bogus ep0 stage %d\n", musb->ep0_stage);
952 break;
953 }
954
955 return more;
956 }
957
958 /*
959 * Handle default endpoint interrupt as host. Only called in IRQ time
960 * from musb_interrupt().
961 *
962 * called with controller irqlocked
963 */
964 irqreturn_t musb_h_ep0_irq(struct musb *musb)
965 {
966 struct urb *urb;
967 u16 csr, len;
968 int status = 0;
969 void __iomem *mbase = musb->mregs;
970 struct musb_hw_ep *hw_ep = musb->control_ep;
971 void __iomem *epio = hw_ep->regs;
972 struct musb_qh *qh = hw_ep->in_qh;
973 bool complete = false;
974 irqreturn_t retval = IRQ_NONE;
975
976 /* ep0 only has one queue, "in" */
977 urb = next_urb(qh);
978
979 musb_ep_select(mbase, 0);
980 csr = musb_readw(epio, MUSB_CSR0);
981 len = (csr & MUSB_CSR0_RXPKTRDY)
982 ? musb_readb(epio, MUSB_COUNT0)
983 : 0;
984
985 DBG(4, "<== csr0 %04x, qh %p, count %d, urb %p, stage %d\n",
986 csr, qh, len, urb, musb->ep0_stage);
987
988 /* if we just did status stage, we are done */
989 if (MUSB_EP0_STATUS == musb->ep0_stage) {
990 retval = IRQ_HANDLED;
991 complete = true;
992 }
993
994 /* prepare status */
995 if (csr & MUSB_CSR0_H_RXSTALL) {
996 DBG(6, "STALLING ENDPOINT\n");
997 status = -EPIPE;
998
999 } else if (csr & MUSB_CSR0_H_ERROR) {
1000 DBG(2, "no response, csr0 %04x\n", csr);
1001 status = -EPROTO;
1002
1003 } else if (csr & MUSB_CSR0_H_NAKTIMEOUT) {
1004 DBG(2, "control NAK timeout\n");
1005
1006 /* NOTE: this code path would be a good place to PAUSE a
1007 * control transfer, if another one is queued, so that
1008 * ep0 is more likely to stay busy. That's already done
1009 * for bulk RX transfers.
1010 *
1011 * if (qh->ring.next != &musb->control), then
1012 * we have a candidate... NAKing is *NOT* an error
1013 */
1014 musb_writew(epio, MUSB_CSR0, 0);
1015 retval = IRQ_HANDLED;
1016 }
1017
1018 if (status) {
1019 DBG(6, "aborting\n");
1020 retval = IRQ_HANDLED;
1021 if (urb)
1022 urb->status = status;
1023 complete = true;
1024
1025 /* use the proper sequence to abort the transfer */
1026 if (csr & MUSB_CSR0_H_REQPKT) {
1027 csr &= ~MUSB_CSR0_H_REQPKT;
1028 musb_writew(epio, MUSB_CSR0, csr);
1029 csr &= ~MUSB_CSR0_H_NAKTIMEOUT;
1030 musb_writew(epio, MUSB_CSR0, csr);
1031 } else {
1032 musb_h_ep0_flush_fifo(hw_ep);
1033 }
1034
1035 musb_writeb(epio, MUSB_NAKLIMIT0, 0);
1036
1037 /* clear it */
1038 musb_writew(epio, MUSB_CSR0, 0);
1039 }
1040
1041 if (unlikely(!urb)) {
1042 /* stop endpoint since we have no place for its data, this
1043 * SHOULD NEVER HAPPEN! */
1044 ERR("no URB for end 0\n");
1045
1046 musb_h_ep0_flush_fifo(hw_ep);
1047 goto done;
1048 }
1049
1050 if (!complete) {
1051 /* call common logic and prepare response */
1052 if (musb_h_ep0_continue(musb, len, urb)) {
1053 /* more packets required */
1054 csr = (MUSB_EP0_IN == musb->ep0_stage)
1055 ? MUSB_CSR0_H_REQPKT : MUSB_CSR0_TXPKTRDY;
1056 } else {
1057 /* data transfer complete; perform status phase */
1058 if (usb_pipeout(urb->pipe)
1059 || !urb->transfer_buffer_length)
1060 csr = MUSB_CSR0_H_STATUSPKT
1061 | MUSB_CSR0_H_REQPKT;
1062 else
1063 csr = MUSB_CSR0_H_STATUSPKT
1064 | MUSB_CSR0_TXPKTRDY;
1065
1066 /* flag status stage */
1067 musb->ep0_stage = MUSB_EP0_STATUS;
1068
1069 DBG(5, "ep0 STATUS, csr %04x\n", csr);
1070
1071 }
1072 musb_writew(epio, MUSB_CSR0, csr);
1073 retval = IRQ_HANDLED;
1074 } else
1075 musb->ep0_stage = MUSB_EP0_IDLE;
1076
1077 /* call completion handler if done */
1078 if (complete)
1079 musb_advance_schedule(musb, urb, hw_ep, 1);
1080 done:
1081 return retval;
1082 }
1083
1084
1085 #ifdef CONFIG_USB_INVENTRA_DMA
1086
1087 /* Host side TX (OUT) using Mentor DMA works as follows:
1088 submit_urb ->
1089 - if queue was empty, Program Endpoint
1090 - ... which starts DMA to fifo in mode 1 or 0
1091
1092 DMA Isr (transfer complete) -> TxAvail()
1093 - Stop DMA (~DmaEnab) (<--- Alert ... currently happens
1094 only in musb_cleanup_urb)
1095 - TxPktRdy has to be set in mode 0 or for
1096 short packets in mode 1.
1097 */
1098
1099 #endif
1100
1101 /* Service a Tx-Available or dma completion irq for the endpoint */
1102 void musb_host_tx(struct musb *musb, u8 epnum)
1103 {
1104 int pipe;
1105 bool done = false;
1106 u16 tx_csr;
1107 size_t length = 0;
1108 size_t offset = 0;
1109 struct musb_hw_ep *hw_ep = musb->endpoints + epnum;
1110 void __iomem *epio = hw_ep->regs;
1111 struct musb_qh *qh = hw_ep->out_qh;
1112 struct urb *urb = next_urb(qh);
1113 u32 status = 0;
1114 void __iomem *mbase = musb->mregs;
1115 struct dma_channel *dma;
1116
1117 musb_ep_select(mbase, epnum);
1118 tx_csr = musb_readw(epio, MUSB_TXCSR);
1119
1120 /* with CPPI, DMA sometimes triggers "extra" irqs */
1121 if (!urb) {
1122 DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
1123 return;
1124 }
1125
1126 pipe = urb->pipe;
1127 dma = is_dma_capable() ? hw_ep->tx_channel : NULL;
1128 DBG(4, "OUT/TX%d end, csr %04x%s\n", epnum, tx_csr,
1129 dma ? ", dma" : "");
1130
1131 /* check for errors */
1132 if (tx_csr & MUSB_TXCSR_H_RXSTALL) {
1133 /* dma was disabled, fifo flushed */
1134 DBG(3, "TX end %d stall\n", epnum);
1135
1136 /* stall; record URB status */
1137 status = -EPIPE;
1138
1139 } else if (tx_csr & MUSB_TXCSR_H_ERROR) {
1140 /* (NON-ISO) dma was disabled, fifo flushed */
1141 DBG(3, "TX 3strikes on ep=%d\n", epnum);
1142
1143 status = -ETIMEDOUT;
1144
1145 } else if (tx_csr & MUSB_TXCSR_H_NAKTIMEOUT) {
1146 DBG(6, "TX end=%d device not responding\n", epnum);
1147
1148 /* NOTE: this code path would be a good place to PAUSE a
1149 * transfer, if there's some other (nonperiodic) tx urb
1150 * that could use this fifo. (dma complicates it...)
1151 * That's already done for bulk RX transfers.
1152 *
1153 * if (bulk && qh->ring.next != &musb->out_bulk), then
1154 * we have a candidate... NAKing is *NOT* an error
1155 */
1156 musb_ep_select(mbase, epnum);
1157 musb_writew(epio, MUSB_TXCSR,
1158 MUSB_TXCSR_H_WZC_BITS
1159 | MUSB_TXCSR_TXPKTRDY);
1160 return;
1161 }
1162
1163 if (status) {
1164 if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
1165 dma->status = MUSB_DMA_STATUS_CORE_ABORT;
1166 (void) musb->dma_controller->channel_abort(dma);
1167 }
1168
1169 /* do the proper sequence to abort the transfer in the
1170 * usb core; the dma engine should already be stopped.
1171 */
1172 musb_h_tx_flush_fifo(hw_ep);
1173 tx_csr &= ~(MUSB_TXCSR_AUTOSET
1174 | MUSB_TXCSR_DMAENAB
1175 | MUSB_TXCSR_H_ERROR
1176 | MUSB_TXCSR_H_RXSTALL
1177 | MUSB_TXCSR_H_NAKTIMEOUT
1178 );
1179
1180 musb_ep_select(mbase, epnum);
1181 musb_writew(epio, MUSB_TXCSR, tx_csr);
1182 /* REVISIT may need to clear FLUSHFIFO ... */
1183 musb_writew(epio, MUSB_TXCSR, tx_csr);
1184 musb_writeb(epio, MUSB_TXINTERVAL, 0);
1185
1186 done = true;
1187 }
1188
1189 /* second cppi case */
1190 if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
1191 DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
1192 return;
1193 }
1194
1195 if (is_dma_capable() && dma && !status) {
1196 /*
1197 * DMA has completed. But if we're using DMA mode 1 (multi
1198 * packet DMA), we need a terminal TXPKTRDY interrupt before
1199 * we can consider this transfer completed, lest we trash
1200 * its last packet when writing the next URB's data. So we
1201 * switch back to mode 0 to get that interrupt; we'll come
1202 * back here once it happens.
1203 */
1204 if (tx_csr & MUSB_TXCSR_DMAMODE) {
1205 /*
1206 * We shouldn't clear DMAMODE with DMAENAB set; so
1207 * clear them in a safe order. That should be OK
1208 * once TXPKTRDY has been set (and I've never seen
1209 * it being 0 at this moment -- DMA interrupt latency
1210 * is significant) but if it hasn't been then we have
1211 * no choice but to stop being polite and ignore the
1212 * programmer's guide... :-)
1213 *
1214 * Note that we must write TXCSR with TXPKTRDY cleared
1215 * in order not to re-trigger the packet send (this bit
1216 * can't be cleared by CPU), and there's another caveat:
1217 * TXPKTRDY may be set shortly and then cleared in the
1218 * double-buffered FIFO mode, so we do an extra TXCSR
1219 * read for debouncing...
1220 */
1221 tx_csr &= musb_readw(epio, MUSB_TXCSR);
1222 if (tx_csr & MUSB_TXCSR_TXPKTRDY) {
1223 tx_csr &= ~(MUSB_TXCSR_DMAENAB |
1224 MUSB_TXCSR_TXPKTRDY);
1225 musb_writew(epio, MUSB_TXCSR,
1226 tx_csr | MUSB_TXCSR_H_WZC_BITS);
1227 }
1228 tx_csr &= ~(MUSB_TXCSR_DMAMODE |
1229 MUSB_TXCSR_TXPKTRDY);
1230 musb_writew(epio, MUSB_TXCSR,
1231 tx_csr | MUSB_TXCSR_H_WZC_BITS);
1232
1233 /*
1234 * There is no guarantee that we'll get an interrupt
1235 * after clearing DMAMODE as we might have done this
1236 * too late (after TXPKTRDY was cleared by controller).
1237 * Re-read TXCSR as we have spoiled its previous value.
1238 */
1239 tx_csr = musb_readw(epio, MUSB_TXCSR);
1240 }
1241
1242 /*
1243 * We may get here from a DMA completion or TXPKTRDY interrupt.
1244 * In any case, we must check the FIFO status here and bail out
1245 * only if the FIFO still has data -- that should prevent the
1246 * "missed" TXPKTRDY interrupts and deal with double-buffered
1247 * FIFO mode too...
1248 */
1249 if (tx_csr & (MUSB_TXCSR_FIFONOTEMPTY | MUSB_TXCSR_TXPKTRDY)) {
1250 DBG(2, "DMA complete but packet still in FIFO, "
1251 "CSR %04x\n", tx_csr);
1252 return;
1253 }
1254 }
1255
1256 if (!status || dma || usb_pipeisoc(pipe)) {
1257 if (dma)
1258 length = dma->actual_len;
1259 else
1260 length = qh->segsize;
1261 qh->offset += length;
1262
1263 if (usb_pipeisoc(pipe)) {
1264 struct usb_iso_packet_descriptor *d;
1265
1266 d = urb->iso_frame_desc + qh->iso_idx;
1267 d->actual_length = length;
1268 d->status = status;
1269 if (++qh->iso_idx >= urb->number_of_packets) {
1270 done = true;
1271 } else {
1272 d++;
1273 offset = d->offset;
1274 length = d->length;
1275 }
1276 } else if (dma) {
1277 done = true;
1278 } else {
1279 /* see if we need to send more data, or ZLP */
1280 if (qh->segsize < qh->maxpacket)
1281 done = true;
1282 else if (qh->offset == urb->transfer_buffer_length
1283 && !(urb->transfer_flags
1284 & URB_ZERO_PACKET))
1285 done = true;
1286 if (!done) {
1287 offset = qh->offset;
1288 length = urb->transfer_buffer_length - offset;
1289 }
1290 }
1291 }
1292
1293 /* urb->status != -EINPROGRESS means request has been faulted,
1294 * so we must abort this transfer after cleanup
1295 */
1296 if (urb->status != -EINPROGRESS) {
1297 done = true;
1298 if (status == 0)
1299 status = urb->status;
1300 }
1301
1302 if (done) {
1303 /* set status */
1304 urb->status = status;
1305 urb->actual_length = qh->offset;
1306 musb_advance_schedule(musb, urb, hw_ep, USB_DIR_OUT);
1307 return;
1308 } else if (usb_pipeisoc(pipe) && dma) {
1309 if (musb_tx_dma_program(musb->dma_controller, hw_ep, qh, urb,
1310 offset, length)) {
1311 if (is_cppi_enabled() || tusb_dma_omap())
1312 musb_h_tx_dma_start(hw_ep);
1313 return;
1314 }
1315 } else if (tx_csr & MUSB_TXCSR_DMAENAB) {
1316 DBG(1, "not complete, but DMA enabled?\n");
1317 return;
1318 }
1319
1320 /*
1321 * PIO: start next packet in this URB.
1322 *
1323 * REVISIT: some docs say that when hw_ep->tx_double_buffered,
1324 * (and presumably, FIFO is not half-full) we should write *two*
1325 * packets before updating TXCSR; other docs disagree...
1326 */
1327 if (length > qh->maxpacket)
1328 length = qh->maxpacket;
1329 musb_write_fifo(hw_ep, length, urb->transfer_buffer + offset);
1330 qh->segsize = length;
1331
1332 musb_ep_select(mbase, epnum);
1333 musb_writew(epio, MUSB_TXCSR,
1334 MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
1335 }
1336
1337
1338 #ifdef CONFIG_USB_INVENTRA_DMA
1339
1340 /* Host side RX (IN) using Mentor DMA works as follows:
1341 submit_urb ->
1342 - if queue was empty, ProgramEndpoint
1343 - first IN token is sent out (by setting ReqPkt)
1344 LinuxIsr -> RxReady()
1345 /\ => first packet is received
1346 | - Set in mode 0 (DmaEnab, ~ReqPkt)
1347 | -> DMA Isr (transfer complete) -> RxReady()
1348 | - Ack receive (~RxPktRdy), turn off DMA (~DmaEnab)
1349 | - if urb not complete, send next IN token (ReqPkt)
1350 | | else complete urb.
1351 | |
1352 ---------------------------
1353 *
1354 * Nuances of mode 1:
1355 * For short packets, no ack (+RxPktRdy) is sent automatically
1356 * (even if AutoClear is ON)
1357 * For full packets, ack (~RxPktRdy) and next IN token (+ReqPkt) is sent
1358 * automatically => major problem, as collecting the next packet becomes
1359 * difficult. Hence mode 1 is not used.
1360 *
1361 * REVISIT
1362 * All we care about at this driver level is that
1363 * (a) all URBs terminate with REQPKT cleared and fifo(s) empty;
1364 * (b) termination conditions are: short RX, or buffer full;
1365 * (c) fault modes include
1366 * - iff URB_SHORT_NOT_OK, short RX status is -EREMOTEIO.
1367 * (and that endpoint's dma queue stops immediately)
1368 * - overflow (full, PLUS more bytes in the terminal packet)
1369 *
1370 * So for example, usb-storage sets URB_SHORT_NOT_OK, and would
1371 * thus be a great candidate for using mode 1 ... for all but the
1372 * last packet of one URB's transfer.
1373 */
1374
1375 #endif
1376
1377 /* Schedule next QH from musb->in_bulk and move the current qh to
1378 * the end; avoids starvation for other endpoints.
1379 */
1380 static void musb_bulk_rx_nak_timeout(struct musb *musb, struct musb_hw_ep *ep)
1381 {
1382 struct dma_channel *dma;
1383 struct urb *urb;
1384 void __iomem *mbase = musb->mregs;
1385 void __iomem *epio = ep->regs;
1386 struct musb_qh *cur_qh, *next_qh;
1387 u16 rx_csr;
1388
1389 musb_ep_select(mbase, ep->epnum);
1390 dma = is_dma_capable() ? ep->rx_channel : NULL;
1391
1392 /* clear nak timeout bit */
1393 rx_csr = musb_readw(epio, MUSB_RXCSR);
1394 rx_csr |= MUSB_RXCSR_H_WZC_BITS;
1395 rx_csr &= ~MUSB_RXCSR_DATAERROR;
1396 musb_writew(epio, MUSB_RXCSR, rx_csr);
1397
1398 cur_qh = first_qh(&musb->in_bulk);
1399 if (cur_qh) {
1400 urb = next_urb(cur_qh);
1401 if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
1402 dma->status = MUSB_DMA_STATUS_CORE_ABORT;
1403 musb->dma_controller->channel_abort(dma);
1404 urb->actual_length += dma->actual_len;
1405 dma->actual_len = 0L;
1406 }
1407 musb_save_toggle(cur_qh, 1, urb);
1408
1409 /* move cur_qh to end of queue */
1410 list_move_tail(&cur_qh->ring, &musb->in_bulk);
1411
1412 /* get the next qh from musb->in_bulk */
1413 next_qh = first_qh(&musb->in_bulk);
1414
1415 /* set rx_reinit and schedule the next qh */
1416 ep->rx_reinit = 1;
1417 musb_start_urb(musb, 1, next_qh);
1418 }
1419 }
1420
1421 /*
1422 * Service an RX interrupt for the given IN endpoint; docs cover bulk, iso,
1423 * and high-bandwidth IN transfer cases.
1424 */
1425 void musb_host_rx(struct musb *musb, u8 epnum)
1426 {
1427 struct urb *urb;
1428 struct musb_hw_ep *hw_ep = musb->endpoints + epnum;
1429 void __iomem *epio = hw_ep->regs;
1430 struct musb_qh *qh = hw_ep->in_qh;
1431 size_t xfer_len;
1432 void __iomem *mbase = musb->mregs;
1433 int pipe;
1434 u16 rx_csr, val;
1435 bool iso_err = false;
1436 bool done = false;
1437 u32 status;
1438 struct dma_channel *dma;
1439
1440 musb_ep_select(mbase, epnum);
1441
1442 urb = next_urb(qh);
1443 dma = is_dma_capable() ? hw_ep->rx_channel : NULL;
1444 status = 0;
1445 xfer_len = 0;
1446
1447 rx_csr = musb_readw(epio, MUSB_RXCSR);
1448 val = rx_csr;
1449
1450 if (unlikely(!urb)) {
1451 /* REVISIT -- THIS SHOULD NEVER HAPPEN ... but, at least
1452 * usbtest #11 (unlinks) triggers it regularly, sometimes
1453 * with fifo full. (Only with DMA??)
1454 */
1455 DBG(3, "BOGUS RX%d ready, csr %04x, count %d\n", epnum, val,
1456 musb_readw(epio, MUSB_RXCOUNT));
1457 musb_h_flush_rxfifo(hw_ep, MUSB_RXCSR_CLRDATATOG);
1458 return;
1459 }
1460
1461 pipe = urb->pipe;
1462
1463 DBG(5, "<== hw %d rxcsr %04x, urb actual %d (+dma %zu)\n",
1464 epnum, rx_csr, urb->actual_length,
1465 dma ? dma->actual_len : 0);
1466
1467 /* check for errors, concurrent stall & unlink is not really
1468 * handled yet! */
1469 if (rx_csr & MUSB_RXCSR_H_RXSTALL) {
1470 DBG(3, "RX end %d STALL\n", epnum);
1471
1472 /* stall; record URB status */
1473 status = -EPIPE;
1474
1475 } else if (rx_csr & MUSB_RXCSR_H_ERROR) {
1476 DBG(3, "end %d RX proto error\n", epnum);
1477
1478 status = -EPROTO;
1479 musb_writeb(epio, MUSB_RXINTERVAL, 0);
1480
1481 } else if (rx_csr & MUSB_RXCSR_DATAERROR) {
1482
1483 if (USB_ENDPOINT_XFER_ISOC != qh->type) {
1484 DBG(6, "RX end %d NAK timeout\n", epnum);
1485
1486 /* NOTE: NAKing is *NOT* an error, so we want to
1487 * continue. Except ... if there's a request for
1488 * another QH, use that instead of starving it.
1489 *
1490 * Devices like Ethernet and serial adapters keep
1491 * reads posted at all times, which will starve
1492 * other devices without this logic.
1493 */
1494 if (usb_pipebulk(urb->pipe)
1495 && qh->mux == 1
1496 && !list_is_singular(&musb->in_bulk)) {
1497 musb_bulk_rx_nak_timeout(musb, hw_ep);
1498 return;
1499 }
1500 musb_ep_select(mbase, epnum);
1501 rx_csr |= MUSB_RXCSR_H_WZC_BITS;
1502 rx_csr &= ~MUSB_RXCSR_DATAERROR;
1503 musb_writew(epio, MUSB_RXCSR, rx_csr);
1504
1505 goto finish;
1506 } else {
1507 DBG(4, "RX end %d ISO data error\n", epnum);
1508 /* packet error reported later */
1509 iso_err = true;
1510 }
1511 } else if (rx_csr & MUSB_RXCSR_INCOMPRX) {
1512 DBG(3, "end %d high bandwidth incomplete ISO packet RX\n",
1513 epnum);
1514 status = -EPROTO;
1515 }
1516
1517 /* faults abort the transfer */
1518 if (status) {
1519 /* clean up dma and collect transfer count */
1520 if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
1521 dma->status = MUSB_DMA_STATUS_CORE_ABORT;
1522 (void) musb->dma_controller->channel_abort(dma);
1523 xfer_len = dma->actual_len;
1524 }
1525 musb_h_flush_rxfifo(hw_ep, MUSB_RXCSR_CLRDATATOG);
1526 musb_writeb(epio, MUSB_RXINTERVAL, 0);
1527 done = true;
1528 goto finish;
1529 }
1530
1531 if (unlikely(dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY)) {
1532 /* SHOULD NEVER HAPPEN ... but at least DaVinci has done it */
1533 ERR("RX%d dma busy, csr %04x\n", epnum, rx_csr);
1534 goto finish;
1535 }
1536
1537 /* thorough shutdown for now ... given more precise fault handling
1538 * and better queueing support, we might keep a DMA pipeline going
1539 * while processing this irq for earlier completions.
1540 */
1541
1542 /* FIXME this is _way_ too much in-line logic for Mentor DMA */
1543
1544 #ifndef CONFIG_USB_INVENTRA_DMA
1545 if (rx_csr & MUSB_RXCSR_H_REQPKT) {
1546 /* REVISIT this happened for a while on some short reads...
1547 * the cleanup still needs investigation... looks bad...
1548 * and also duplicates dma cleanup code above ... plus,
1549 * shouldn't this be the "half full" double buffer case?
1550 */
1551 if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
1552 dma->status = MUSB_DMA_STATUS_CORE_ABORT;
1553 (void) musb->dma_controller->channel_abort(dma);
1554 xfer_len = dma->actual_len;
1555 done = true;
1556 }
1557
1558 DBG(2, "RXCSR%d %04x, reqpkt, len %zu%s\n", epnum, rx_csr,
1559 xfer_len, dma ? ", dma" : "");
1560 rx_csr &= ~MUSB_RXCSR_H_REQPKT;
1561
1562 musb_ep_select(mbase, epnum);
1563 musb_writew(epio, MUSB_RXCSR,
1564 MUSB_RXCSR_H_WZC_BITS | rx_csr);
1565 }
1566 #endif
1567 if (dma && (rx_csr & MUSB_RXCSR_DMAENAB)) {
1568 xfer_len = dma->actual_len;
1569
1570 val &= ~(MUSB_RXCSR_DMAENAB
1571 | MUSB_RXCSR_H_AUTOREQ
1572 | MUSB_RXCSR_AUTOCLEAR
1573 | MUSB_RXCSR_RXPKTRDY);
1574 musb_writew(hw_ep->regs, MUSB_RXCSR, val);
1575
1576 #ifdef CONFIG_USB_INVENTRA_DMA
1577 if (usb_pipeisoc(pipe)) {
1578 struct usb_iso_packet_descriptor *d;
1579
1580 d = urb->iso_frame_desc + qh->iso_idx;
1581 d->actual_length = xfer_len;
1582
1583 /* even if there was an error, we did the dma
1584 * for iso_frame_desc->length
1585 */
1586 if (d->status != EILSEQ && d->status != -EOVERFLOW)
1587 d->status = 0;
1588
1589 if (++qh->iso_idx >= urb->number_of_packets)
1590 done = true;
1591 else
1592 done = false;
1593
1594 } else {
1595 /* done if urb buffer is full or short packet is recd */
1596 done = (urb->actual_length + xfer_len >=
1597 urb->transfer_buffer_length
1598 || dma->actual_len < qh->maxpacket);
1599 }
1600
1601 /* send IN token for next packet, without AUTOREQ */
1602 if (!done) {
1603 val |= MUSB_RXCSR_H_REQPKT;
1604 musb_writew(epio, MUSB_RXCSR,
1605 MUSB_RXCSR_H_WZC_BITS | val);
1606 }
1607
1608 DBG(4, "ep %d dma %s, rxcsr %04x, rxcount %d\n", epnum,
1609 done ? "off" : "reset",
1610 musb_readw(epio, MUSB_RXCSR),
1611 musb_readw(epio, MUSB_RXCOUNT));
1612 #else
1613 done = true;
1614 #endif
1615 } else if (urb->status == -EINPROGRESS) {
1616 /* if no errors, be sure a packet is ready for unloading */
1617 if (unlikely(!(rx_csr & MUSB_RXCSR_RXPKTRDY))) {
1618 status = -EPROTO;
1619 ERR("Rx interrupt with no errors or packet!\n");
1620
1621 /* FIXME this is another "SHOULD NEVER HAPPEN" */
1622
1623 /* SCRUB (RX) */
1624 /* do the proper sequence to abort the transfer */
1625 musb_ep_select(mbase, epnum);
1626 val &= ~MUSB_RXCSR_H_REQPKT;
1627 musb_writew(epio, MUSB_RXCSR, val);
1628 goto finish;
1629 }
1630
1631 /* we are expecting IN packets */
1632 #ifdef CONFIG_USB_INVENTRA_DMA
1633 if (dma) {
1634 struct dma_controller *c;
1635 u16 rx_count;
1636 int ret, length;
1637 dma_addr_t buf;
1638
1639 rx_count = musb_readw(epio, MUSB_RXCOUNT);
1640
1641 DBG(2, "RX%d count %d, buffer 0x%x len %d/%d\n",
1642 epnum, rx_count,
1643 urb->transfer_dma
1644 + urb->actual_length,
1645 qh->offset,
1646 urb->transfer_buffer_length);
1647
1648 c = musb->dma_controller;
1649
1650 if (usb_pipeisoc(pipe)) {
1651 int d_status = 0;
1652 struct usb_iso_packet_descriptor *d;
1653
1654 d = urb->iso_frame_desc + qh->iso_idx;
1655
1656 if (iso_err) {
1657 d_status = -EILSEQ;
1658 urb->error_count++;
1659 }
1660 if (rx_count > d->length) {
1661 if (d_status == 0) {
1662 d_status = -EOVERFLOW;
1663 urb->error_count++;
1664 }
1665 DBG(2, "** OVERFLOW %d into %d\n",\
1666 rx_count, d->length);
1667
1668 length = d->length;
1669 } else
1670 length = rx_count;
1671 d->status = d_status;
1672 buf = urb->transfer_dma + d->offset;
1673 } else {
1674 length = rx_count;
1675 buf = urb->transfer_dma +
1676 urb->actual_length;
1677 }
1678
1679 dma->desired_mode = 0;
1680 #ifdef USE_MODE1
1681 /* because of the issue below, mode 1 will
1682 * only rarely behave with correct semantics.
1683 */
1684 if ((urb->transfer_flags &
1685 URB_SHORT_NOT_OK)
1686 && (urb->transfer_buffer_length -
1687 urb->actual_length)
1688 > qh->maxpacket)
1689 dma->desired_mode = 1;
1690 if (rx_count < hw_ep->max_packet_sz_rx) {
1691 length = rx_count;
1692 dma->desired_mode = 0;
1693 } else {
1694 length = urb->transfer_buffer_length;
1695 }
1696 #endif
1697
1698 /* Disadvantage of using mode 1:
1699 * It's basically usable only for mass storage class; essentially all
1700 * other protocols also terminate transfers on short packets.
1701 *
1702 * Details:
1703 * An extra IN token is sent at the end of the transfer (due to AUTOREQ)
1704 * If you try to use mode 1 for (transfer_buffer_length - 512), and try
1705 * to use the extra IN token to grab the last packet using mode 0, then
1706 * the problem is that you cannot be sure when the device will send the
1707 * last packet and RxPktRdy set. Sometimes the packet is recd too soon
1708 * such that it gets lost when RxCSR is re-set at the end of the mode 1
1709 * transfer, while sometimes it is recd just a little late so that if you
1710 * try to configure for mode 0 soon after the mode 1 transfer is
1711 * completed, you will find rxcount 0. Okay, so you might think why not
1712 * wait for an interrupt when the pkt is recd. Well, you won't get any!
1713 */
1714
1715 val = musb_readw(epio, MUSB_RXCSR);
1716 val &= ~MUSB_RXCSR_H_REQPKT;
1717
1718 if (dma->desired_mode == 0)
1719 val &= ~MUSB_RXCSR_H_AUTOREQ;
1720 else
1721 val |= MUSB_RXCSR_H_AUTOREQ;
1722 val |= MUSB_RXCSR_DMAENAB;
1723
1724 /* autoclear shouldn't be set in high bandwidth */
1725 if (qh->hb_mult == 1)
1726 val |= MUSB_RXCSR_AUTOCLEAR;
1727
1728 musb_writew(epio, MUSB_RXCSR,
1729 MUSB_RXCSR_H_WZC_BITS | val);
1730
1731 /* REVISIT if when actual_length != 0,
1732 * transfer_buffer_length needs to be
1733 * adjusted first...
1734 */
1735 ret = c->channel_program(
1736 dma, qh->maxpacket,
1737 dma->desired_mode, buf, length);
1738
1739 if (!ret) {
1740 c->channel_release(dma);
1741 hw_ep->rx_channel = NULL;
1742 dma = NULL;
1743 /* REVISIT reset CSR */
1744 }
1745 }
1746 #endif /* Mentor DMA */
1747
1748 if (!dma) {
1749 done = musb_host_packet_rx(musb, urb,
1750 epnum, iso_err);
1751 DBG(6, "read %spacket\n", done ? "last " : "");
1752 }
1753 }
1754
1755 finish:
1756 urb->actual_length += xfer_len;
1757 qh->offset += xfer_len;
1758 if (done) {
1759 if (urb->status == -EINPROGRESS)
1760 urb->status = status;
1761 musb_advance_schedule(musb, urb, hw_ep, USB_DIR_IN);
1762 }
1763 }
1764
1765 /* schedule nodes correspond to peripheral endpoints, like an OHCI QH.
1766 * the software schedule associates multiple such nodes with a given
1767 * host side hardware endpoint + direction; scheduling may activate
1768 * that hardware endpoint.
1769 */
1770 static int musb_schedule(
1771 struct musb *musb,
1772 struct musb_qh *qh,
1773 int is_in)
1774 {
1775 int idle;
1776 int best_diff;
1777 int best_end, epnum;
1778 struct musb_hw_ep *hw_ep = NULL;
1779 struct list_head *head = NULL;
1780 u8 toggle;
1781 u8 txtype;
1782 struct urb *urb = next_urb(qh);
1783
1784 /* use fixed hardware for control and bulk */
1785 if (qh->type == USB_ENDPOINT_XFER_CONTROL) {
1786 head = &musb->control;
1787 hw_ep = musb->control_ep;
1788 goto success;
1789 }
1790
1791 /* else, periodic transfers get muxed to other endpoints */
1792
1793 /*
1794 * We know this qh hasn't been scheduled, so all we need to do
1795 * is choose which hardware endpoint to put it on ...
1796 *
1797 * REVISIT what we really want here is a regular schedule tree
1798 * like e.g. OHCI uses.
1799 */
1800 best_diff = 4096;
1801 best_end = -1;
1802
1803 for (epnum = 1, hw_ep = musb->endpoints + 1;
1804 epnum < musb->nr_endpoints;
1805 epnum++, hw_ep++) {
1806 int diff;
1807
1808 if (musb_ep_get_qh(hw_ep, is_in) != NULL)
1809 continue;
1810
1811 if (hw_ep == musb->bulk_ep)
1812 continue;
1813
1814 if (is_in)
1815 diff = hw_ep->max_packet_sz_rx;
1816 else
1817 diff = hw_ep->max_packet_sz_tx;
1818 diff -= (qh->maxpacket * qh->hb_mult);
1819
1820 if (diff >= 0 && best_diff > diff) {
1821
1822 /*
1823 * Mentor controller has a bug in that if we schedule
1824 * a BULK Tx transfer on an endpoint that had earlier
1825 * handled ISOC then the BULK transfer has to start on
1826 * a zero toggle. If the BULK transfer starts on a 1
1827 * toggle then this transfer will fail as the mentor
1828 * controller starts the Bulk transfer on a 0 toggle
1829 * irrespective of the programming of the toggle bits
1830 * in the TXCSR register. Check for this condition
1831 * while allocating the EP for a Tx Bulk transfer. If
1832 * so skip this EP.
1833 */
1834 hw_ep = musb->endpoints + epnum;
1835 toggle = usb_gettoggle(urb->dev, qh->epnum, !is_in);
1836 txtype = (musb_readb(hw_ep->regs, MUSB_TXTYPE)
1837 >> 4) & 0x3;
1838 if (!is_in && (qh->type == USB_ENDPOINT_XFER_BULK) &&
1839 toggle && (txtype == USB_ENDPOINT_XFER_ISOC))
1840 continue;
1841
1842 best_diff = diff;
1843 best_end = epnum;
1844 }
1845 }
1846 /* use bulk reserved ep1 if no other ep is free */
1847 if (best_end < 0 && qh->type == USB_ENDPOINT_XFER_BULK) {
1848 hw_ep = musb->bulk_ep;
1849 if (is_in)
1850 head = &musb->in_bulk;
1851 else
1852 head = &musb->out_bulk;
1853
1854 /* Enable bulk RX NAK timeout scheme when bulk requests are
1855 * multiplexed. This scheme doen't work in high speed to full
1856 * speed scenario as NAK interrupts are not coming from a
1857 * full speed device connected to a high speed device.
1858 * NAK timeout interval is 8 (128 uframe or 16ms) for HS and
1859 * 4 (8 frame or 8ms) for FS device.
1860 */
1861 if (is_in && qh->dev)
1862 qh->intv_reg =
1863 (USB_SPEED_HIGH == qh->dev->speed) ? 8 : 4;
1864 goto success;
1865 } else if (best_end < 0) {
1866 return -ENOSPC;
1867 }
1868
1869 idle = 1;
1870 qh->mux = 0;
1871 hw_ep = musb->endpoints + best_end;
1872 DBG(4, "qh %p periodic slot %d\n", qh, best_end);
1873 success:
1874 if (head) {
1875 idle = list_empty(head);
1876 list_add_tail(&qh->ring, head);
1877 qh->mux = 1;
1878 }
1879 qh->hw_ep = hw_ep;
1880 qh->hep->hcpriv = qh;
1881 if (idle)
1882 musb_start_urb(musb, is_in, qh);
1883 return 0;
1884 }
1885
1886 static int musb_urb_enqueue(
1887 struct usb_hcd *hcd,
1888 struct urb *urb,
1889 gfp_t mem_flags)
1890 {
1891 unsigned long flags;
1892 struct musb *musb = hcd_to_musb(hcd);
1893 struct usb_host_endpoint *hep = urb->ep;
1894 struct musb_qh *qh;
1895 struct usb_endpoint_descriptor *epd = &hep->desc;
1896 int ret;
1897 unsigned type_reg;
1898 unsigned interval;
1899
1900 /* host role must be active */
1901 if (!is_host_active(musb) || !musb->is_active)
1902 return -ENODEV;
1903
1904 spin_lock_irqsave(&musb->lock, flags);
1905 ret = usb_hcd_link_urb_to_ep(hcd, urb);
1906 qh = ret ? NULL : hep->hcpriv;
1907 if (qh)
1908 urb->hcpriv = qh;
1909 spin_unlock_irqrestore(&musb->lock, flags);
1910
1911 /* DMA mapping was already done, if needed, and this urb is on
1912 * hep->urb_list now ... so we're done, unless hep wasn't yet
1913 * scheduled onto a live qh.
1914 *
1915 * REVISIT best to keep hep->hcpriv valid until the endpoint gets
1916 * disabled, testing for empty qh->ring and avoiding qh setup costs
1917 * except for the first urb queued after a config change.
1918 */
1919 if (qh || ret)
1920 return ret;
1921
1922 /* Allocate and initialize qh, minimizing the work done each time
1923 * hw_ep gets reprogrammed, or with irqs blocked. Then schedule it.
1924 *
1925 * REVISIT consider a dedicated qh kmem_cache, so it's harder
1926 * for bugs in other kernel code to break this driver...
1927 */
1928 qh = kzalloc(sizeof *qh, mem_flags);
1929 if (!qh) {
1930 spin_lock_irqsave(&musb->lock, flags);
1931 usb_hcd_unlink_urb_from_ep(hcd, urb);
1932 spin_unlock_irqrestore(&musb->lock, flags);
1933 return -ENOMEM;
1934 }
1935
1936 qh->hep = hep;
1937 qh->dev = urb->dev;
1938 INIT_LIST_HEAD(&qh->ring);
1939 qh->is_ready = 1;
1940
1941 qh->maxpacket = le16_to_cpu(epd->wMaxPacketSize);
1942 qh->type = usb_endpoint_type(epd);
1943
1944 /* Bits 11 & 12 of wMaxPacketSize encode high bandwidth multiplier.
1945 * Some musb cores don't support high bandwidth ISO transfers; and
1946 * we don't (yet!) support high bandwidth interrupt transfers.
1947 */
1948 qh->hb_mult = 1 + ((qh->maxpacket >> 11) & 0x03);
1949 if (qh->hb_mult > 1) {
1950 int ok = (qh->type == USB_ENDPOINT_XFER_ISOC);
1951
1952 if (ok)
1953 ok = (usb_pipein(urb->pipe) && musb->hb_iso_rx)
1954 || (usb_pipeout(urb->pipe) && musb->hb_iso_tx);
1955 if (!ok) {
1956 ret = -EMSGSIZE;
1957 goto done;
1958 }
1959 qh->maxpacket &= 0x7ff;
1960 }
1961
1962 qh->epnum = usb_endpoint_num(epd);
1963
1964 /* NOTE: urb->dev->devnum is wrong during SET_ADDRESS */
1965 qh->addr_reg = (u8) usb_pipedevice(urb->pipe);
1966
1967 /* precompute rxtype/txtype/type0 register */
1968 type_reg = (qh->type << 4) | qh->epnum;
1969 switch (urb->dev->speed) {
1970 case USB_SPEED_LOW:
1971 type_reg |= 0xc0;
1972 break;
1973 case USB_SPEED_FULL:
1974 type_reg |= 0x80;
1975 break;
1976 default:
1977 type_reg |= 0x40;
1978 }
1979 qh->type_reg = type_reg;
1980
1981 /* Precompute RXINTERVAL/TXINTERVAL register */
1982 switch (qh->type) {
1983 case USB_ENDPOINT_XFER_INT:
1984 /*
1985 * Full/low speeds use the linear encoding,
1986 * high speed uses the logarithmic encoding.
1987 */
1988 if (urb->dev->speed <= USB_SPEED_FULL) {
1989 interval = max_t(u8, epd->bInterval, 1);
1990 break;
1991 }
1992 /* FALLTHROUGH */
1993 case USB_ENDPOINT_XFER_ISOC:
1994 /* ISO always uses logarithmic encoding */
1995 interval = min_t(u8, epd->bInterval, 16);
1996 break;
1997 default:
1998 /* REVISIT we actually want to use NAK limits, hinting to the
1999 * transfer scheduling logic to try some other qh, e.g. try
2000 * for 2 msec first:
2001 *
2002 * interval = (USB_SPEED_HIGH == urb->dev->speed) ? 16 : 2;
2003 *
2004 * The downside of disabling this is that transfer scheduling
2005 * gets VERY unfair for nonperiodic transfers; a misbehaving
2006 * peripheral could make that hurt. That's perfectly normal
2007 * for reads from network or serial adapters ... so we have
2008 * partial NAKlimit support for bulk RX.
2009 *
2010 * The upside of disabling it is simpler transfer scheduling.
2011 */
2012 interval = 0;
2013 }
2014 qh->intv_reg = interval;
2015
2016 /* precompute addressing for external hub/tt ports */
2017 if (musb->is_multipoint) {
2018 struct usb_device *parent = urb->dev->parent;
2019
2020 if (parent != hcd->self.root_hub) {
2021 qh->h_addr_reg = (u8) parent->devnum;
2022
2023 /* set up tt info if needed */
2024 if (urb->dev->tt) {
2025 qh->h_port_reg = (u8) urb->dev->ttport;
2026 if (urb->dev->tt->hub)
2027 qh->h_addr_reg =
2028 (u8) urb->dev->tt->hub->devnum;
2029 if (urb->dev->tt->multi)
2030 qh->h_addr_reg |= 0x80;
2031 }
2032 }
2033 }
2034
2035 /* invariant: hep->hcpriv is null OR the qh that's already scheduled.
2036 * until we get real dma queues (with an entry for each urb/buffer),
2037 * we only have work to do in the former case.
2038 */
2039 spin_lock_irqsave(&musb->lock, flags);
2040 if (hep->hcpriv) {
2041 /* some concurrent activity submitted another urb to hep...
2042 * odd, rare, error prone, but legal.
2043 */
2044 kfree(qh);
2045 qh = NULL;
2046 ret = 0;
2047 } else
2048 ret = musb_schedule(musb, qh,
2049 epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK);
2050
2051 if (ret == 0) {
2052 urb->hcpriv = qh;
2053 /* FIXME set urb->start_frame for iso/intr, it's tested in
2054 * musb_start_urb(), but otherwise only konicawc cares ...
2055 */
2056 }
2057 spin_unlock_irqrestore(&musb->lock, flags);
2058
2059 done:
2060 if (ret != 0) {
2061 spin_lock_irqsave(&musb->lock, flags);
2062 usb_hcd_unlink_urb_from_ep(hcd, urb);
2063 spin_unlock_irqrestore(&musb->lock, flags);
2064 kfree(qh);
2065 }
2066 return ret;
2067 }
2068
2069
2070 /*
2071 * abort a transfer that's at the head of a hardware queue.
2072 * called with controller locked, irqs blocked
2073 * that hardware queue advances to the next transfer, unless prevented
2074 */
2075 static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh)
2076 {
2077 struct musb_hw_ep *ep = qh->hw_ep;
2078 void __iomem *epio = ep->regs;
2079 unsigned hw_end = ep->epnum;
2080 void __iomem *regs = ep->musb->mregs;
2081 int is_in = usb_pipein(urb->pipe);
2082 int status = 0;
2083 u16 csr;
2084
2085 musb_ep_select(regs, hw_end);
2086
2087 if (is_dma_capable()) {
2088 struct dma_channel *dma;
2089
2090 dma = is_in ? ep->rx_channel : ep->tx_channel;
2091 if (dma) {
2092 status = ep->musb->dma_controller->channel_abort(dma);
2093 DBG(status ? 1 : 3,
2094 "abort %cX%d DMA for urb %p --> %d\n",
2095 is_in ? 'R' : 'T', ep->epnum,
2096 urb, status);
2097 urb->actual_length += dma->actual_len;
2098 }
2099 }
2100
2101 /* turn off DMA requests, discard state, stop polling ... */
2102 if (is_in) {
2103 /* giveback saves bulk toggle */
2104 csr = musb_h_flush_rxfifo(ep, 0);
2105
2106 /* REVISIT we still get an irq; should likely clear the
2107 * endpoint's irq status here to avoid bogus irqs.
2108 * clearing that status is platform-specific...
2109 */
2110 } else if (ep->epnum) {
2111 musb_h_tx_flush_fifo(ep);
2112 csr = musb_readw(epio, MUSB_TXCSR);
2113 csr &= ~(MUSB_TXCSR_AUTOSET
2114 | MUSB_TXCSR_DMAENAB
2115 | MUSB_TXCSR_H_RXSTALL
2116 | MUSB_TXCSR_H_NAKTIMEOUT
2117 | MUSB_TXCSR_H_ERROR
2118 | MUSB_TXCSR_TXPKTRDY);
2119 musb_writew(epio, MUSB_TXCSR, csr);
2120 /* REVISIT may need to clear FLUSHFIFO ... */
2121 musb_writew(epio, MUSB_TXCSR, csr);
2122 /* flush cpu writebuffer */
2123 csr = musb_readw(epio, MUSB_TXCSR);
2124 } else {
2125 musb_h_ep0_flush_fifo(ep);
2126 }
2127 if (status == 0)
2128 musb_advance_schedule(ep->musb, urb, ep, is_in);
2129 return status;
2130 }
2131
2132 static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
2133 {
2134 struct musb *musb = hcd_to_musb(hcd);
2135 struct musb_qh *qh;
2136 unsigned long flags;
2137 int is_in = usb_pipein(urb->pipe);
2138 int ret;
2139
2140 DBG(4, "urb=%p, dev%d ep%d%s\n", urb,
2141 usb_pipedevice(urb->pipe),
2142 usb_pipeendpoint(urb->pipe),
2143 is_in ? "in" : "out");
2144
2145 spin_lock_irqsave(&musb->lock, flags);
2146 ret = usb_hcd_check_unlink_urb(hcd, urb, status);
2147 if (ret)
2148 goto done;
2149
2150 qh = urb->hcpriv;
2151 if (!qh)
2152 goto done;
2153
2154 /*
2155 * Any URB not actively programmed into endpoint hardware can be
2156 * immediately given back; that's any URB not at the head of an
2157 * endpoint queue, unless someday we get real DMA queues. And even
2158 * if it's at the head, it might not be known to the hardware...
2159 *
2160 * Otherwise abort current transfer, pending DMA, etc.; urb->status
2161 * has already been updated. This is a synchronous abort; it'd be
2162 * OK to hold off until after some IRQ, though.
2163 *
2164 * NOTE: qh is invalid unless !list_empty(&hep->urb_list)
2165 */
2166 if (!qh->is_ready
2167 || urb->urb_list.prev != &qh->hep->urb_list
2168 || musb_ep_get_qh(qh->hw_ep, is_in) != qh) {
2169 int ready = qh->is_ready;
2170
2171 qh->is_ready = 0;
2172 musb_giveback(musb, urb, 0);
2173 qh->is_ready = ready;
2174
2175 /* If nothing else (usually musb_giveback) is using it
2176 * and its URB list has emptied, recycle this qh.
2177 */
2178 if (ready && list_empty(&qh->hep->urb_list)) {
2179 qh->hep->hcpriv = NULL;
2180 list_del(&qh->ring);
2181 kfree(qh);
2182 }
2183 } else
2184 ret = musb_cleanup_urb(urb, qh);
2185 done:
2186 spin_unlock_irqrestore(&musb->lock, flags);
2187 return ret;
2188 }
2189
2190 /* disable an endpoint */
2191 static void
2192 musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
2193 {
2194 u8 is_in = hep->desc.bEndpointAddress & USB_DIR_IN;
2195 unsigned long flags;
2196 struct musb *musb = hcd_to_musb(hcd);
2197 struct musb_qh *qh;
2198 struct urb *urb;
2199
2200 spin_lock_irqsave(&musb->lock, flags);
2201
2202 qh = hep->hcpriv;
2203 if (qh == NULL)
2204 goto exit;
2205
2206 /* NOTE: qh is invalid unless !list_empty(&hep->urb_list) */
2207
2208 /* Kick the first URB off the hardware, if needed */
2209 qh->is_ready = 0;
2210 if (musb_ep_get_qh(qh->hw_ep, is_in) == qh) {
2211 urb = next_urb(qh);
2212
2213 /* make software (then hardware) stop ASAP */
2214 if (!urb->unlinked)
2215 urb->status = -ESHUTDOWN;
2216
2217 /* cleanup */
2218 musb_cleanup_urb(urb, qh);
2219
2220 /* Then nuke all the others ... and advance the
2221 * queue on hw_ep (e.g. bulk ring) when we're done.
2222 */
2223 while (!list_empty(&hep->urb_list)) {
2224 urb = next_urb(qh);
2225 urb->status = -ESHUTDOWN;
2226 musb_advance_schedule(musb, urb, qh->hw_ep, is_in);
2227 }
2228 } else {
2229 /* Just empty the queue; the hardware is busy with
2230 * other transfers, and since !qh->is_ready nothing
2231 * will activate any of these as it advances.
2232 */
2233 while (!list_empty(&hep->urb_list))
2234 musb_giveback(musb, next_urb(qh), -ESHUTDOWN);
2235
2236 hep->hcpriv = NULL;
2237 list_del(&qh->ring);
2238 kfree(qh);
2239 }
2240 exit:
2241 spin_unlock_irqrestore(&musb->lock, flags);
2242 }
2243
2244 static int musb_h_get_frame_number(struct usb_hcd *hcd)
2245 {
2246 struct musb *musb = hcd_to_musb(hcd);
2247
2248 return musb_readw(musb->mregs, MUSB_FRAME);
2249 }
2250
2251 static int musb_h_start(struct usb_hcd *hcd)
2252 {
2253 struct musb *musb = hcd_to_musb(hcd);
2254
2255 /* NOTE: musb_start() is called when the hub driver turns
2256 * on port power, or when (OTG) peripheral starts.
2257 */
2258 hcd->state = HC_STATE_RUNNING;
2259 musb->port1_status = 0;
2260 return 0;
2261 }
2262
2263 static void musb_h_stop(struct usb_hcd *hcd)
2264 {
2265 musb_stop(hcd_to_musb(hcd));
2266 hcd->state = HC_STATE_HALT;
2267 }
2268
2269 static int musb_bus_suspend(struct usb_hcd *hcd)
2270 {
2271 struct musb *musb = hcd_to_musb(hcd);
2272 u8 devctl;
2273
2274 if (!is_host_active(musb))
2275 return 0;
2276
2277 switch (musb->xceiv->state) {
2278 case OTG_STATE_A_SUSPEND:
2279 return 0;
2280 case OTG_STATE_A_WAIT_VRISE:
2281 /* ID could be grounded even if there's no device
2282 * on the other end of the cable. NOTE that the
2283 * A_WAIT_VRISE timers are messy with MUSB...
2284 */
2285 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
2286 if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
2287 musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
2288 break;
2289 default:
2290 break;
2291 }
2292
2293 if (musb->is_active) {
2294 WARNING("trying to suspend as %s while active\n",
2295 otg_state_string(musb));
2296 return -EBUSY;
2297 } else
2298 return 0;
2299 }
2300
2301 static int musb_bus_resume(struct usb_hcd *hcd)
2302 {
2303 /* resuming child port does the work */
2304 return 0;
2305 }
2306
2307 const struct hc_driver musb_hc_driver = {
2308 .description = "musb-hcd",
2309 .product_desc = "MUSB HDRC host driver",
2310 .hcd_priv_size = sizeof(struct musb),
2311 .flags = HCD_USB2 | HCD_MEMORY,
2312
2313 /* not using irq handler or reset hooks from usbcore, since
2314 * those must be shared with peripheral code for OTG configs
2315 */
2316
2317 .start = musb_h_start,
2318 .stop = musb_h_stop,
2319
2320 .get_frame_number = musb_h_get_frame_number,
2321
2322 .urb_enqueue = musb_urb_enqueue,
2323 .urb_dequeue = musb_urb_dequeue,
2324 .endpoint_disable = musb_h_disable,
2325
2326 .hub_status_data = musb_hub_status_data,
2327 .hub_control = musb_hub_control,
2328 .bus_suspend = musb_bus_suspend,
2329 .bus_resume = musb_bus_resume,
2330 /* .start_port_reset = NULL, */
2331 /* .hub_irq_enable = NULL, */
2332 };
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree