2 * arch/arm/mach-pnx4008/time.c
6 * Authors: Vitaly Wool, Dmitry Chigirev, Grigory Tolstolytkin <source@mvista.com>
8 * 2005 (c) MontaVista Software, Inc. This file is licensed under
9 * the terms of the GNU General Public License version 2. This program
10 * is licensed "as is" without any warranty of any kind, whether express
14 #include <linux/config.h>
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/delay.h>
18 #include <linux/interrupt.h>
19 #include <linux/sched.h>
20 #include <linux/spinlock.h>
21 #include <linux/module.h>
22 #include <linux/kallsyms.h>
23 #include <linux/time.h>
24 #include <linux/timex.h>
25 #include <linux/irq.h>
27 #include <asm/system.h>
28 #include <asm/hardware.h>
31 #include <asm/mach/time.h>
32 #include <asm/errno.h>
34 /*! Note: all timers are UPCOUNTING */
37 * Returns number of us since last clock interrupt. Note that interrupts
38 * will have been disabled by do_gettimeoffset()
40 static unsigned long pnx4008_gettimeoffset(void)
43 __raw_readl(HSTIM_MATCH0
) - __raw_readl(HSTIM_COUNTER
);
44 u32 elapsed
= LATCH
- ticks_to_match
;
45 return (elapsed
* (tick_nsec
/ 1000)) / LATCH
;
49 * IRQ handler for the timer
51 static irqreturn_t
pnx4008_timer_interrupt(int irq
, void *dev_id
,
54 if (__raw_readl(HSTIM_INT
) & MATCH0_INT
) {
56 write_seqlock(&xtime_lock
);
62 * this algorithm takes care of possible delay
63 * for this interrupt handling longer than a normal
66 __raw_writel(__raw_readl(HSTIM_MATCH0
) + LATCH
,
68 __raw_writel(MATCH0_INT
, HSTIM_INT
); /* clear interrupt */
71 * The goal is to keep incrementing HSTIM_MATCH0
72 * register until HSTIM_MATCH0 indicates time after
73 * what HSTIM_COUNTER indicates.
76 (__raw_readl(HSTIM_MATCH0
) -
77 __raw_readl(HSTIM_COUNTER
)) < 0);
79 write_sequnlock(&xtime_lock
);
85 static struct irqaction pnx4008_timer_irq
= {
86 .name
= "PNX4008 Tick Timer",
87 .flags
= IRQF_DISABLED
| IRQF_TIMER
,
88 .handler
= pnx4008_timer_interrupt
92 * Set up timer and timer interrupt.
94 static __init
void pnx4008_setup_timer(void)
96 __raw_writel(RESET_COUNT
, MSTIM_CTRL
);
97 while (__raw_readl(MSTIM_COUNTER
)) ; /* wait for reset to complete. 100% guarantee event */
98 __raw_writel(0, MSTIM_CTRL
); /* stop the timer */
99 __raw_writel(0, MSTIM_MCTRL
);
101 __raw_writel(RESET_COUNT
, HSTIM_CTRL
);
102 while (__raw_readl(HSTIM_COUNTER
)) ; /* wait for reset to complete. 100% guarantee event */
103 __raw_writel(0, HSTIM_CTRL
);
104 __raw_writel(0, HSTIM_MCTRL
);
105 __raw_writel(0, HSTIM_CCR
);
106 __raw_writel(12, HSTIM_PMATCH
); /* scale down to 1 MHZ */
107 __raw_writel(LATCH
, HSTIM_MATCH0
);
108 __raw_writel(MR0_INT
, HSTIM_MCTRL
);
110 setup_irq(HSTIMER_INT
, &pnx4008_timer_irq
);
112 __raw_writel(COUNT_ENAB
| DEBUG_EN
, HSTIM_CTRL
); /*start timer, stop when JTAG active */
115 /* Timer Clock Control in PM register */
116 #define TIMCLK_CTRL_REG IO_ADDRESS((PNX4008_PWRMAN_BASE + 0xBC))
117 #define WATCHDOG_CLK_EN 1
118 #define TIMER_CLK_EN 2 /* HS and MS timers? */
120 static u32 timclk_ctrl_reg_save
;
122 void pnx4008_timer_suspend(void)
124 timclk_ctrl_reg_save
= __raw_readl(TIMCLK_CTRL_REG
);
125 __raw_writel(0, TIMCLK_CTRL_REG
); /* disable timers */
128 void pnx4008_timer_resume(void)
130 __raw_writel(timclk_ctrl_reg_save
, TIMCLK_CTRL_REG
); /* enable timers */
133 struct sys_timer pnx4008_timer
= {
134 .init
= pnx4008_setup_timer
,
135 .offset
= pnx4008_gettimeoffset
,
136 .suspend
= pnx4008_timer_suspend
,
137 .resume
= pnx4008_timer_resume
,