2 * Ethernet netdevice using ATM AAL5 as underlying carrier
3 * (RFC1483 obsoleted by RFC2684) for Linux
5 * Authors: Marcell GAL, 2000, XDSL Ltd, Hungary
6 * Eric Kinzie, 2006-2007, US Naval Research Laboratory
9 #define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__
11 #include <linux/module.h>
12 #include <linux/init.h>
13 #include <linux/kernel.h>
14 #include <linux/list.h>
15 #include <linux/netdevice.h>
16 #include <linux/skbuff.h>
17 #include <linux/etherdevice.h>
18 #include <linux/rtnetlink.h>
20 #include <linux/uaccess.h>
21 #include <linux/slab.h>
23 #include <linux/atm.h>
24 #include <linux/atmdev.h>
25 #include <linux/capability.h>
26 #include <linux/seq_file.h>
28 #include <linux/atmbr2684.h>
32 static void skb_debug(const struct sk_buff
*skb
)
36 print_hex_dump(KERN_DEBUG
, "br2684: skb: ", DUMP_OFFSET
,
37 16, 1, skb
->data
, min(NUM2PRINT
, skb
->len
), true);
41 #define BR2684_ETHERTYPE_LEN 2
42 #define BR2684_PAD_LEN 2
44 #define LLC 0xaa, 0xaa, 0x03
45 #define SNAP_BRIDGED 0x00, 0x80, 0xc2
46 #define SNAP_ROUTED 0x00, 0x00, 0x00
47 #define PID_ETHERNET 0x00, 0x07
48 #define ETHERTYPE_IPV4 0x08, 0x00
49 #define ETHERTYPE_IPV6 0x86, 0xdd
50 #define PAD_BRIDGED 0x00, 0x00
52 static const unsigned char ethertype_ipv4
[] = { ETHERTYPE_IPV4
};
53 static const unsigned char ethertype_ipv6
[] = { ETHERTYPE_IPV6
};
54 static const unsigned char llc_oui_pid_pad
[] =
55 { LLC
, SNAP_BRIDGED
, PID_ETHERNET
, PAD_BRIDGED
};
56 static const unsigned char llc_oui_ipv4
[] = { LLC
, SNAP_ROUTED
, ETHERTYPE_IPV4
};
57 static const unsigned char llc_oui_ipv6
[] = { LLC
, SNAP_ROUTED
, ETHERTYPE_IPV6
};
60 e_vc
= BR2684_ENCAPS_VC
,
61 e_llc
= BR2684_ENCAPS_LLC
,
65 struct atm_vcc
*atmvcc
;
66 struct net_device
*device
;
67 /* keep old push, pop functions for chaining */
68 void (*old_push
)(struct atm_vcc
*vcc
, struct sk_buff
*skb
);
69 void (*old_pop
)(struct atm_vcc
*vcc
, struct sk_buff
*skb
);
70 enum br2684_encaps encaps
;
71 struct list_head brvccs
;
72 #ifdef CONFIG_ATM_BR2684_IPFILTER
73 struct br2684_filter filter
;
74 #endif /* CONFIG_ATM_BR2684_IPFILTER */
75 unsigned copies_needed
, copies_failed
;
79 struct net_device
*net_dev
;
80 struct list_head br2684_devs
;
82 struct list_head brvccs
; /* one device <=> one vcc (before xmas) */
84 enum br2684_payload payload
;
88 * This lock should be held for writing any time the list of devices or
89 * their attached vcc's could be altered. It should be held for reading
90 * any time these are being queried. Note that we sometimes need to
91 * do read-locking under interrupt context, so write locking must block
92 * the current CPU's interrupts
94 static DEFINE_RWLOCK(devs_lock
);
96 static LIST_HEAD(br2684_devs
);
98 static inline struct br2684_dev
*BRPRIV(const struct net_device
*net_dev
)
100 return (struct br2684_dev
*)netdev_priv(net_dev
);
103 static inline struct net_device
*list_entry_brdev(const struct list_head
*le
)
105 return list_entry(le
, struct br2684_dev
, br2684_devs
)->net_dev
;
108 static inline struct br2684_vcc
*BR2684_VCC(const struct atm_vcc
*atmvcc
)
110 return (struct br2684_vcc
*)(atmvcc
->user_back
);
113 static inline struct br2684_vcc
*list_entry_brvcc(const struct list_head
*le
)
115 return list_entry(le
, struct br2684_vcc
, brvccs
);
118 /* Caller should hold read_lock(&devs_lock) */
119 static struct net_device
*br2684_find_dev(const struct br2684_if_spec
*s
)
121 struct list_head
*lh
;
122 struct net_device
*net_dev
;
124 case BR2684_FIND_BYNUM
:
125 list_for_each(lh
, &br2684_devs
) {
126 net_dev
= list_entry_brdev(lh
);
127 if (BRPRIV(net_dev
)->number
== s
->spec
.devnum
)
131 case BR2684_FIND_BYIFNAME
:
132 list_for_each(lh
, &br2684_devs
) {
133 net_dev
= list_entry_brdev(lh
);
134 if (!strncmp(net_dev
->name
, s
->spec
.ifname
, IFNAMSIZ
))
142 static int atm_dev_event(struct notifier_block
*this, unsigned long event
,
145 struct atm_dev
*atm_dev
= arg
;
146 struct list_head
*lh
;
147 struct net_device
*net_dev
;
148 struct br2684_vcc
*brvcc
;
149 struct atm_vcc
*atm_vcc
;
152 pr_debug("event=%ld dev=%p\n", event
, atm_dev
);
154 read_lock_irqsave(&devs_lock
, flags
);
155 list_for_each(lh
, &br2684_devs
) {
156 net_dev
= list_entry_brdev(lh
);
158 list_for_each_entry(brvcc
, &BRPRIV(net_dev
)->brvccs
, brvccs
) {
159 atm_vcc
= brvcc
->atmvcc
;
160 if (atm_vcc
&& brvcc
->atmvcc
->dev
== atm_dev
) {
162 if (atm_vcc
->dev
->signal
== ATM_PHY_SIG_LOST
)
163 netif_carrier_off(net_dev
);
165 netif_carrier_on(net_dev
);
170 read_unlock_irqrestore(&devs_lock
, flags
);
175 static struct notifier_block atm_dev_notifier
= {
176 .notifier_call
= atm_dev_event
,
179 /* chained vcc->pop function. Check if we should wake the netif_queue */
180 static void br2684_pop(struct atm_vcc
*vcc
, struct sk_buff
*skb
)
182 struct br2684_vcc
*brvcc
= BR2684_VCC(vcc
);
183 struct net_device
*net_dev
= skb
->dev
;
185 pr_debug("(vcc %p ; net_dev %p )\n", vcc
, net_dev
);
186 brvcc
->old_pop(vcc
, skb
);
191 if (atm_may_send(vcc
, 0))
192 netif_wake_queue(net_dev
);
196 * Send a packet out a particular vcc. Not to useful right now, but paves
197 * the way for multiple vcc's per itf. Returns true if we can send,
200 static int br2684_xmit_vcc(struct sk_buff
*skb
, struct net_device
*dev
,
201 struct br2684_vcc
*brvcc
)
203 struct br2684_dev
*brdev
= BRPRIV(dev
);
204 struct atm_vcc
*atmvcc
;
205 int minheadroom
= (brvcc
->encaps
== e_llc
) ? 10 : 2;
207 if (skb_headroom(skb
) < minheadroom
) {
208 struct sk_buff
*skb2
= skb_realloc_headroom(skb
, minheadroom
);
209 brvcc
->copies_needed
++;
212 brvcc
->copies_failed
++;
218 if (brvcc
->encaps
== e_llc
) {
219 if (brdev
->payload
== p_bridged
) {
220 skb_push(skb
, sizeof(llc_oui_pid_pad
));
221 skb_copy_to_linear_data(skb
, llc_oui_pid_pad
,
222 sizeof(llc_oui_pid_pad
));
223 } else if (brdev
->payload
== p_routed
) {
224 unsigned short prot
= ntohs(skb
->protocol
);
226 skb_push(skb
, sizeof(llc_oui_ipv4
));
229 skb_copy_to_linear_data(skb
, llc_oui_ipv4
,
230 sizeof(llc_oui_ipv4
));
233 skb_copy_to_linear_data(skb
, llc_oui_ipv6
,
234 sizeof(llc_oui_ipv6
));
242 if (brdev
->payload
== p_bridged
) {
244 memset(skb
->data
, 0, 2);
245 } else { /* p_routed */
246 skb_pull(skb
, ETH_HLEN
);
251 ATM_SKB(skb
)->vcc
= atmvcc
= brvcc
->atmvcc
;
252 pr_debug("atm_skb(%p)->vcc(%p)->dev(%p)\n", skb
, atmvcc
, atmvcc
->dev
);
253 atomic_add(skb
->truesize
, &sk_atm(atmvcc
)->sk_wmem_alloc
);
254 ATM_SKB(skb
)->atm_options
= atmvcc
->atm_options
;
255 dev
->stats
.tx_packets
++;
256 dev
->stats
.tx_bytes
+= skb
->len
;
257 atmvcc
->send(atmvcc
, skb
);
259 if (!atm_may_send(atmvcc
, 0)) {
260 netif_stop_queue(brvcc
->device
);
261 /*check for race with br2684_pop*/
262 if (atm_may_send(atmvcc
, 0))
263 netif_start_queue(brvcc
->device
);
269 static inline struct br2684_vcc
*pick_outgoing_vcc(const struct sk_buff
*skb
,
270 const struct br2684_dev
*brdev
)
272 return list_empty(&brdev
->brvccs
) ? NULL
: list_entry_brvcc(brdev
->brvccs
.next
); /* 1 vcc/dev right now */
275 static netdev_tx_t
br2684_start_xmit(struct sk_buff
*skb
,
276 struct net_device
*dev
)
278 struct br2684_dev
*brdev
= BRPRIV(dev
);
279 struct br2684_vcc
*brvcc
;
281 pr_debug("skb_dst(skb)=%p\n", skb_dst(skb
));
282 read_lock(&devs_lock
);
283 brvcc
= pick_outgoing_vcc(skb
, brdev
);
285 pr_debug("no vcc attached to dev %s\n", dev
->name
);
286 dev
->stats
.tx_errors
++;
287 dev
->stats
.tx_carrier_errors
++;
288 /* netif_stop_queue(dev); */
290 read_unlock(&devs_lock
);
293 if (!br2684_xmit_vcc(skb
, dev
, brvcc
)) {
295 * We should probably use netif_*_queue() here, but that
296 * involves added complication. We need to walk before
299 * Don't free here! this pointer might be no longer valid!
301 dev
->stats
.tx_errors
++;
302 dev
->stats
.tx_fifo_errors
++;
304 read_unlock(&devs_lock
);
309 * We remember when the MAC gets set, so we don't override it later with
310 * the ESI of the ATM card of the first VC
312 static int br2684_mac_addr(struct net_device
*dev
, void *p
)
314 int err
= eth_mac_addr(dev
, p
);
316 BRPRIV(dev
)->mac_was_set
= 1;
320 #ifdef CONFIG_ATM_BR2684_IPFILTER
321 /* this IOCTL is experimental. */
322 static int br2684_setfilt(struct atm_vcc
*atmvcc
, void __user
* arg
)
324 struct br2684_vcc
*brvcc
;
325 struct br2684_filter_set fs
;
327 if (copy_from_user(&fs
, arg
, sizeof fs
))
329 if (fs
.ifspec
.method
!= BR2684_FIND_BYNOTHING
) {
331 * This is really a per-vcc thing, but we can also search
334 struct br2684_dev
*brdev
;
335 read_lock(&devs_lock
);
336 brdev
= BRPRIV(br2684_find_dev(&fs
.ifspec
));
337 if (brdev
== NULL
|| list_empty(&brdev
->brvccs
) ||
338 brdev
->brvccs
.next
!= brdev
->brvccs
.prev
) /* >1 VCC */
341 brvcc
= list_entry_brvcc(brdev
->brvccs
.next
);
342 read_unlock(&devs_lock
);
346 brvcc
= BR2684_VCC(atmvcc
);
347 memcpy(&brvcc
->filter
, &fs
.filter
, sizeof(brvcc
->filter
));
351 /* Returns 1 if packet should be dropped */
353 packet_fails_filter(__be16 type
, struct br2684_vcc
*brvcc
, struct sk_buff
*skb
)
355 if (brvcc
->filter
.netmask
== 0)
356 return 0; /* no filter in place */
357 if (type
== htons(ETH_P_IP
) &&
358 (((struct iphdr
*)(skb
->data
))->daddr
& brvcc
->filter
.
359 netmask
) == brvcc
->filter
.prefix
)
361 if (type
== htons(ETH_P_ARP
))
364 * TODO: we should probably filter ARPs too.. don't want to have
365 * them returning values that don't make sense, or is that ok?
369 #endif /* CONFIG_ATM_BR2684_IPFILTER */
371 static void br2684_close_vcc(struct br2684_vcc
*brvcc
)
373 pr_debug("removing VCC %p from dev %p\n", brvcc
, brvcc
->device
);
374 write_lock_irq(&devs_lock
);
375 list_del(&brvcc
->brvccs
);
376 write_unlock_irq(&devs_lock
);
377 brvcc
->atmvcc
->user_back
= NULL
; /* what about vcc->recvq ??? */
378 brvcc
->old_push(brvcc
->atmvcc
, NULL
); /* pass on the bad news */
380 module_put(THIS_MODULE
);
383 /* when AAL5 PDU comes in: */
384 static void br2684_push(struct atm_vcc
*atmvcc
, struct sk_buff
*skb
)
386 struct br2684_vcc
*brvcc
= BR2684_VCC(atmvcc
);
387 struct net_device
*net_dev
= brvcc
->device
;
388 struct br2684_dev
*brdev
= BRPRIV(net_dev
);
392 if (unlikely(skb
== NULL
)) {
393 /* skb==NULL means VCC is being destroyed */
394 br2684_close_vcc(brvcc
);
395 if (list_empty(&brdev
->brvccs
)) {
396 write_lock_irq(&devs_lock
);
397 list_del(&brdev
->br2684_devs
);
398 write_unlock_irq(&devs_lock
);
399 unregister_netdev(net_dev
);
400 free_netdev(net_dev
);
406 atm_return(atmvcc
, skb
->truesize
);
407 pr_debug("skb from brdev %p\n", brdev
);
408 if (brvcc
->encaps
== e_llc
) {
410 if (skb
->len
> 7 && skb
->data
[7] == 0x01)
411 __skb_trim(skb
, skb
->len
- 4);
413 /* accept packets that have "ipv[46]" in the snap header */
414 if ((skb
->len
>= (sizeof(llc_oui_ipv4
))) &&
415 (memcmp(skb
->data
, llc_oui_ipv4
,
416 sizeof(llc_oui_ipv4
) - BR2684_ETHERTYPE_LEN
) == 0)) {
417 if (memcmp(skb
->data
+ 6, ethertype_ipv6
,
418 sizeof(ethertype_ipv6
)) == 0)
419 skb
->protocol
= htons(ETH_P_IPV6
);
420 else if (memcmp(skb
->data
+ 6, ethertype_ipv4
,
421 sizeof(ethertype_ipv4
)) == 0)
422 skb
->protocol
= htons(ETH_P_IP
);
425 skb_pull(skb
, sizeof(llc_oui_ipv4
));
426 skb_reset_network_header(skb
);
427 skb
->pkt_type
= PACKET_HOST
;
429 * Let us waste some time for checking the encapsulation.
430 * Note, that only 7 char is checked so frames with a valid FCS
431 * are also accepted (but FCS is not checked of course).
433 } else if ((skb
->len
>= sizeof(llc_oui_pid_pad
)) &&
434 (memcmp(skb
->data
, llc_oui_pid_pad
, 7) == 0)) {
435 skb_pull(skb
, sizeof(llc_oui_pid_pad
));
436 skb
->protocol
= eth_type_trans(skb
, net_dev
);
441 if (brdev
->payload
== p_routed
) {
444 skb_reset_network_header(skb
);
446 if (iph
->version
== 4)
447 skb
->protocol
= htons(ETH_P_IP
);
448 else if (iph
->version
== 6)
449 skb
->protocol
= htons(ETH_P_IPV6
);
452 skb
->pkt_type
= PACKET_HOST
;
453 } else { /* p_bridged */
454 /* first 2 chars should be 0 */
455 if (*((u16
*) (skb
->data
)) != 0)
457 skb_pull(skb
, BR2684_PAD_LEN
);
458 skb
->protocol
= eth_type_trans(skb
, net_dev
);
462 #ifdef CONFIG_ATM_BR2684_IPFILTER
463 if (unlikely(packet_fails_filter(skb
->protocol
, brvcc
, skb
)))
465 #endif /* CONFIG_ATM_BR2684_IPFILTER */
467 ATM_SKB(skb
)->vcc
= atmvcc
; /* needed ? */
468 pr_debug("received packet's protocol: %x\n", ntohs(skb
->protocol
));
470 /* sigh, interface is down? */
471 if (unlikely(!(net_dev
->flags
& IFF_UP
)))
473 net_dev
->stats
.rx_packets
++;
474 net_dev
->stats
.rx_bytes
+= skb
->len
;
475 memset(ATM_SKB(skb
), 0, sizeof(struct atm_skb_data
));
480 net_dev
->stats
.rx_dropped
++;
483 net_dev
->stats
.rx_errors
++;
489 * Assign a vcc to a dev
490 * Note: we do not have explicit unassign, but look at _push()
492 static int br2684_regvcc(struct atm_vcc
*atmvcc
, void __user
* arg
)
494 struct sk_buff_head queue
;
496 struct br2684_vcc
*brvcc
;
497 struct sk_buff
*skb
, *tmp
;
498 struct sk_buff_head
*rq
;
499 struct br2684_dev
*brdev
;
500 struct net_device
*net_dev
;
501 struct atm_backend_br2684 be
;
504 if (copy_from_user(&be
, arg
, sizeof be
))
506 brvcc
= kzalloc(sizeof(struct br2684_vcc
), GFP_KERNEL
);
509 write_lock_irq(&devs_lock
);
510 net_dev
= br2684_find_dev(&be
.ifspec
);
511 if (net_dev
== NULL
) {
512 pr_err("tried to attach to non-existant device\n");
516 brdev
= BRPRIV(net_dev
);
517 if (atmvcc
->push
== NULL
) {
521 if (!list_empty(&brdev
->brvccs
)) {
522 /* Only 1 VCC/dev right now */
526 if (be
.fcs_in
!= BR2684_FCSIN_NO
||
527 be
.fcs_out
!= BR2684_FCSOUT_NO
||
528 be
.fcs_auto
|| be
.has_vpiid
|| be
.send_padding
||
529 (be
.encaps
!= BR2684_ENCAPS_VC
&&
530 be
.encaps
!= BR2684_ENCAPS_LLC
) ||
535 pr_debug("vcc=%p, encaps=%d, brvcc=%p\n", atmvcc
, be
.encaps
, brvcc
);
536 if (list_empty(&brdev
->brvccs
) && !brdev
->mac_was_set
) {
537 unsigned char *esi
= atmvcc
->dev
->esi
;
538 if (esi
[0] | esi
[1] | esi
[2] | esi
[3] | esi
[4] | esi
[5])
539 memcpy(net_dev
->dev_addr
, esi
, net_dev
->addr_len
);
541 net_dev
->dev_addr
[2] = 1;
543 list_add(&brvcc
->brvccs
, &brdev
->brvccs
);
544 write_unlock_irq(&devs_lock
);
545 brvcc
->device
= net_dev
;
546 brvcc
->atmvcc
= atmvcc
;
547 atmvcc
->user_back
= brvcc
;
548 brvcc
->encaps
= (enum br2684_encaps
)be
.encaps
;
549 brvcc
->old_push
= atmvcc
->push
;
550 brvcc
->old_pop
= atmvcc
->pop
;
552 atmvcc
->push
= br2684_push
;
553 atmvcc
->pop
= br2684_pop
;
555 __skb_queue_head_init(&queue
);
556 rq
= &sk_atm(atmvcc
)->sk_receive_queue
;
558 spin_lock_irqsave(&rq
->lock
, flags
);
559 skb_queue_splice_init(rq
, &queue
);
560 spin_unlock_irqrestore(&rq
->lock
, flags
);
562 skb_queue_walk_safe(&queue
, skb
, tmp
) {
563 struct net_device
*dev
= skb
->dev
;
565 dev
->stats
.rx_bytes
-= skb
->len
;
566 dev
->stats
.rx_packets
--;
568 br2684_push(atmvcc
, skb
);
571 /* initialize netdev carrier state */
572 if (atmvcc
->dev
->signal
== ATM_PHY_SIG_LOST
)
573 netif_carrier_off(net_dev
);
575 netif_carrier_on(net_dev
);
577 __module_get(THIS_MODULE
);
581 write_unlock_irq(&devs_lock
);
586 static const struct net_device_ops br2684_netdev_ops
= {
587 .ndo_start_xmit
= br2684_start_xmit
,
588 .ndo_set_mac_address
= br2684_mac_addr
,
589 .ndo_change_mtu
= eth_change_mtu
,
590 .ndo_validate_addr
= eth_validate_addr
,
593 static const struct net_device_ops br2684_netdev_ops_routed
= {
594 .ndo_start_xmit
= br2684_start_xmit
,
595 .ndo_set_mac_address
= br2684_mac_addr
,
596 .ndo_change_mtu
= eth_change_mtu
599 static void br2684_setup(struct net_device
*netdev
)
601 struct br2684_dev
*brdev
= BRPRIV(netdev
);
604 brdev
->net_dev
= netdev
;
606 netdev
->netdev_ops
= &br2684_netdev_ops
;
608 INIT_LIST_HEAD(&brdev
->brvccs
);
611 static void br2684_setup_routed(struct net_device
*netdev
)
613 struct br2684_dev
*brdev
= BRPRIV(netdev
);
615 brdev
->net_dev
= netdev
;
616 netdev
->hard_header_len
= 0;
617 netdev
->netdev_ops
= &br2684_netdev_ops_routed
;
618 netdev
->addr_len
= 0;
620 netdev
->type
= ARPHRD_PPP
;
621 netdev
->flags
= IFF_POINTOPOINT
| IFF_NOARP
| IFF_MULTICAST
;
622 netdev
->tx_queue_len
= 100;
623 INIT_LIST_HEAD(&brdev
->brvccs
);
626 static int br2684_create(void __user
*arg
)
629 struct net_device
*netdev
;
630 struct br2684_dev
*brdev
;
631 struct atm_newif_br2684 ni
;
632 enum br2684_payload payload
;
636 if (copy_from_user(&ni
, arg
, sizeof ni
))
639 if (ni
.media
& BR2684_FLAG_ROUTED
)
643 ni
.media
&= 0xffff; /* strip flags */
645 if (ni
.media
!= BR2684_MEDIA_ETHERNET
|| ni
.mtu
!= 1500)
648 netdev
= alloc_netdev(sizeof(struct br2684_dev
),
649 ni
.ifname
[0] ? ni
.ifname
: "nas%d",
650 (payload
== p_routed
) ?
651 br2684_setup_routed
: br2684_setup
);
655 brdev
= BRPRIV(netdev
);
657 pr_debug("registered netdev %s\n", netdev
->name
);
658 /* open, stop, do_ioctl ? */
659 err
= register_netdev(netdev
);
661 pr_err("register_netdev failed\n");
666 write_lock_irq(&devs_lock
);
668 brdev
->payload
= payload
;
670 if (list_empty(&br2684_devs
)) {
671 /* 1st br2684 device */
674 brdev
->number
= BRPRIV(list_entry_brdev(br2684_devs
.prev
))->number
+ 1;
676 list_add_tail(&brdev
->br2684_devs
, &br2684_devs
);
677 write_unlock_irq(&devs_lock
);
682 * This handles ioctls actually performed on our vcc - we must return
683 * -ENOIOCTLCMD for any unrecognized ioctl
685 static int br2684_ioctl(struct socket
*sock
, unsigned int cmd
,
688 struct atm_vcc
*atmvcc
= ATM_SD(sock
);
689 void __user
*argp
= (void __user
*)arg
;
695 case ATM_NEWBACKENDIF
:
696 err
= get_user(b
, (atm_backend_t __user
*) argp
);
699 if (b
!= ATM_BACKEND_BR2684
)
701 if (!capable(CAP_NET_ADMIN
))
703 if (cmd
== ATM_SETBACKEND
)
704 return br2684_regvcc(atmvcc
, argp
);
706 return br2684_create(argp
);
707 #ifdef CONFIG_ATM_BR2684_IPFILTER
709 if (atmvcc
->push
!= br2684_push
)
711 if (!capable(CAP_NET_ADMIN
))
713 err
= br2684_setfilt(atmvcc
, argp
);
716 #endif /* CONFIG_ATM_BR2684_IPFILTER */
721 static struct atm_ioctl br2684_ioctl_ops
= {
722 .owner
= THIS_MODULE
,
723 .ioctl
= br2684_ioctl
,
726 #ifdef CONFIG_PROC_FS
727 static void *br2684_seq_start(struct seq_file
*seq
, loff_t
* pos
)
728 __acquires(devs_lock
)
730 read_lock(&devs_lock
);
731 return seq_list_start(&br2684_devs
, *pos
);
734 static void *br2684_seq_next(struct seq_file
*seq
, void *v
, loff_t
* pos
)
736 return seq_list_next(v
, &br2684_devs
, pos
);
739 static void br2684_seq_stop(struct seq_file
*seq
, void *v
)
740 __releases(devs_lock
)
742 read_unlock(&devs_lock
);
745 static int br2684_seq_show(struct seq_file
*seq
, void *v
)
747 const struct br2684_dev
*brdev
= list_entry(v
, struct br2684_dev
,
749 const struct net_device
*net_dev
= brdev
->net_dev
;
750 const struct br2684_vcc
*brvcc
;
752 seq_printf(seq
, "dev %.16s: num=%d, mac=%pM (%s)\n",
756 brdev
->mac_was_set
? "set" : "auto");
758 list_for_each_entry(brvcc
, &brdev
->brvccs
, brvccs
) {
759 seq_printf(seq
, " vcc %d.%d.%d: encaps=%s payload=%s"
760 ", failed copies %u/%u"
761 "\n", brvcc
->atmvcc
->dev
->number
,
762 brvcc
->atmvcc
->vpi
, brvcc
->atmvcc
->vci
,
763 (brvcc
->encaps
== e_llc
) ? "LLC" : "VC",
764 (brdev
->payload
== p_bridged
) ? "bridged" : "routed",
765 brvcc
->copies_failed
, brvcc
->copies_needed
);
766 #ifdef CONFIG_ATM_BR2684_IPFILTER
767 #define b1(var, byte) ((u8 *) &brvcc->filter.var)[byte]
768 #define bs(var) b1(var, 0), b1(var, 1), b1(var, 2), b1(var, 3)
769 if (brvcc
->filter
.netmask
!= 0)
770 seq_printf(seq
, " filter=%d.%d.%d.%d/"
771 "%d.%d.%d.%d\n", bs(prefix
), bs(netmask
));
774 #endif /* CONFIG_ATM_BR2684_IPFILTER */
779 static const struct seq_operations br2684_seq_ops
= {
780 .start
= br2684_seq_start
,
781 .next
= br2684_seq_next
,
782 .stop
= br2684_seq_stop
,
783 .show
= br2684_seq_show
,
786 static int br2684_proc_open(struct inode
*inode
, struct file
*file
)
788 return seq_open(file
, &br2684_seq_ops
);
791 static const struct file_operations br2684_proc_ops
= {
792 .owner
= THIS_MODULE
,
793 .open
= br2684_proc_open
,
796 .release
= seq_release
,
799 extern struct proc_dir_entry
*atm_proc_root
; /* from proc.c */
800 #endif /* CONFIG_PROC_FS */
802 static int __init
br2684_init(void)
804 #ifdef CONFIG_PROC_FS
805 struct proc_dir_entry
*p
;
806 p
= proc_create("br2684", 0, atm_proc_root
, &br2684_proc_ops
);
810 register_atm_ioctl(&br2684_ioctl_ops
);
811 register_atmdevice_notifier(&atm_dev_notifier
);
815 static void __exit
br2684_exit(void)
817 struct net_device
*net_dev
;
818 struct br2684_dev
*brdev
;
819 struct br2684_vcc
*brvcc
;
820 deregister_atm_ioctl(&br2684_ioctl_ops
);
822 #ifdef CONFIG_PROC_FS
823 remove_proc_entry("br2684", atm_proc_root
);
827 unregister_atmdevice_notifier(&atm_dev_notifier
);
829 while (!list_empty(&br2684_devs
)) {
830 net_dev
= list_entry_brdev(br2684_devs
.next
);
831 brdev
= BRPRIV(net_dev
);
832 while (!list_empty(&brdev
->brvccs
)) {
833 brvcc
= list_entry_brvcc(brdev
->brvccs
.next
);
834 br2684_close_vcc(brvcc
);
837 list_del(&brdev
->br2684_devs
);
838 unregister_netdev(net_dev
);
839 free_netdev(net_dev
);
843 module_init(br2684_init
);
844 module_exit(br2684_exit
);
846 MODULE_AUTHOR("Marcell GAL");
847 MODULE_DESCRIPTION("RFC2684 bridged protocols over ATM/AAL5");
848 MODULE_LICENSE("GPL");