[POWERPC] Celleb: consolidate spu management ops
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / include / asm-sparc64 / system.h
blob32281acb878b3dc82745266ea1c5b6fd1dd87e17
1 /* $Id: system.h,v 1.69 2002/02/09 19:49:31 davem Exp $ */
2 #ifndef __SPARC64_SYSTEM_H
3 #define __SPARC64_SYSTEM_H
5 #include <asm/ptrace.h>
6 #include <asm/processor.h>
7 #include <asm/visasm.h>
9 #ifndef __ASSEMBLY__
11 #include <linux/irqflags.h>
14 * Sparc (general) CPU types
16 enum sparc_cpu {
17 sun4 = 0x00,
18 sun4c = 0x01,
19 sun4m = 0x02,
20 sun4d = 0x03,
21 sun4e = 0x04,
22 sun4u = 0x05, /* V8 ploos ploos */
23 sun_unknown = 0x06,
24 ap1000 = 0x07, /* almost a sun4m */
27 #define sparc_cpu_model sun4u
29 /* This cannot ever be a sun4c nor sun4 :) That's just history. */
30 #define ARCH_SUN4C_SUN4 0
31 #define ARCH_SUN4 0
33 /* These are here in an effort to more fully work around Spitfire Errata
34 * #51. Essentially, if a memory barrier occurs soon after a mispredicted
35 * branch, the chip can stop executing instructions until a trap occurs.
36 * Therefore, if interrupts are disabled, the chip can hang forever.
38 * It used to be believed that the memory barrier had to be right in the
39 * delay slot, but a case has been traced recently wherein the memory barrier
40 * was one instruction after the branch delay slot and the chip still hung.
41 * The offending sequence was the following in sym_wakeup_done() of the
42 * sym53c8xx_2 driver:
44 * call sym_ccb_from_dsa, 0
45 * movge %icc, 0, %l0
46 * brz,pn %o0, .LL1303
47 * mov %o0, %l2
48 * membar #LoadLoad
50 * The branch has to be mispredicted for the bug to occur. Therefore, we put
51 * the memory barrier explicitly into a "branch always, predicted taken"
52 * delay slot to avoid the problem case.
54 #define membar_safe(type) \
55 do { __asm__ __volatile__("ba,pt %%xcc, 1f\n\t" \
56 " membar " type "\n" \
57 "1:\n" \
58 : : : "memory"); \
59 } while (0)
61 #define mb() \
62 membar_safe("#LoadLoad | #LoadStore | #StoreStore | #StoreLoad")
63 #define rmb() \
64 membar_safe("#LoadLoad")
65 #define wmb() \
66 membar_safe("#StoreStore")
67 #define membar_storeload() \
68 membar_safe("#StoreLoad")
69 #define membar_storeload_storestore() \
70 membar_safe("#StoreLoad | #StoreStore")
71 #define membar_storeload_loadload() \
72 membar_safe("#StoreLoad | #LoadLoad")
73 #define membar_storestore_loadstore() \
74 membar_safe("#StoreStore | #LoadStore")
76 #endif
78 #define nop() __asm__ __volatile__ ("nop")
80 #define read_barrier_depends() do { } while(0)
81 #define set_mb(__var, __value) \
82 do { __var = __value; membar_storeload_storestore(); } while(0)
84 #ifdef CONFIG_SMP
85 #define smp_mb() mb()
86 #define smp_rmb() rmb()
87 #define smp_wmb() wmb()
88 #define smp_read_barrier_depends() read_barrier_depends()
89 #else
90 #define smp_mb() __asm__ __volatile__("":::"memory")
91 #define smp_rmb() __asm__ __volatile__("":::"memory")
92 #define smp_wmb() __asm__ __volatile__("":::"memory")
93 #define smp_read_barrier_depends() do { } while(0)
94 #endif
96 #define flushi(addr) __asm__ __volatile__ ("flush %0" : : "r" (addr) : "memory")
98 #define flushw_all() __asm__ __volatile__("flushw")
100 /* Performance counter register access. */
101 #define read_pcr(__p) __asm__ __volatile__("rd %%pcr, %0" : "=r" (__p))
102 #define write_pcr(__p) __asm__ __volatile__("wr %0, 0x0, %%pcr" : : "r" (__p))
103 #define read_pic(__p) __asm__ __volatile__("rd %%pic, %0" : "=r" (__p))
105 /* Blackbird errata workaround. See commentary in
106 * arch/sparc64/kernel/smp.c:smp_percpu_timer_interrupt()
107 * for more information.
109 #define reset_pic() \
110 __asm__ __volatile__("ba,pt %xcc, 99f\n\t" \
111 ".align 64\n" \
112 "99:wr %g0, 0x0, %pic\n\t" \
113 "rd %pic, %g0")
115 #ifndef __ASSEMBLY__
117 extern void sun_do_break(void);
118 extern int serial_console;
119 extern int stop_a_enabled;
121 static __inline__ int con_is_present(void)
123 return serial_console ? 0 : 1;
126 extern void synchronize_user_stack(void);
128 extern void __flushw_user(void);
129 #define flushw_user() __flushw_user()
131 #define flush_user_windows flushw_user
132 #define flush_register_windows flushw_all
134 /* Don't hold the runqueue lock over context switch */
135 #define __ARCH_WANT_UNLOCKED_CTXSW
136 #define prepare_arch_switch(next) \
137 do { \
138 flushw_all(); \
139 } while (0)
141 /* See what happens when you design the chip correctly?
143 * We tell gcc we clobber all non-fixed-usage registers except
144 * for l0/l1. It will use one for 'next' and the other to hold
145 * the output value of 'last'. 'next' is not referenced again
146 * past the invocation of switch_to in the scheduler, so we need
147 * not preserve it's value. Hairy, but it lets us remove 2 loads
148 * and 2 stores in this critical code path. -DaveM
150 #define EXTRA_CLOBBER ,"%l1"
151 #define switch_to(prev, next, last) \
152 do { if (test_thread_flag(TIF_PERFCTR)) { \
153 unsigned long __tmp; \
154 read_pcr(__tmp); \
155 current_thread_info()->pcr_reg = __tmp; \
156 read_pic(__tmp); \
157 current_thread_info()->kernel_cntd0 += (unsigned int)(__tmp);\
158 current_thread_info()->kernel_cntd1 += ((__tmp) >> 32); \
160 flush_tlb_pending(); \
161 save_and_clear_fpu(); \
162 /* If you are tempted to conditionalize the following */ \
163 /* so that ASI is only written if it changes, think again. */ \
164 __asm__ __volatile__("wr %%g0, %0, %%asi" \
165 : : "r" (__thread_flag_byte_ptr(task_thread_info(next))[TI_FLAG_BYTE_CURRENT_DS]));\
166 trap_block[current_thread_info()->cpu].thread = \
167 task_thread_info(next); \
168 __asm__ __volatile__( \
169 "mov %%g4, %%g7\n\t" \
170 "stx %%i6, [%%sp + 2047 + 0x70]\n\t" \
171 "stx %%i7, [%%sp + 2047 + 0x78]\n\t" \
172 "rdpr %%wstate, %%o5\n\t" \
173 "stx %%o6, [%%g6 + %3]\n\t" \
174 "stb %%o5, [%%g6 + %2]\n\t" \
175 "rdpr %%cwp, %%o5\n\t" \
176 "stb %%o5, [%%g6 + %5]\n\t" \
177 "mov %1, %%g6\n\t" \
178 "ldub [%1 + %5], %%g1\n\t" \
179 "wrpr %%g1, %%cwp\n\t" \
180 "ldx [%%g6 + %3], %%o6\n\t" \
181 "ldub [%%g6 + %2], %%o5\n\t" \
182 "ldub [%%g6 + %4], %%o7\n\t" \
183 "wrpr %%o5, 0x0, %%wstate\n\t" \
184 "ldx [%%sp + 2047 + 0x70], %%i6\n\t" \
185 "ldx [%%sp + 2047 + 0x78], %%i7\n\t" \
186 "ldx [%%g6 + %6], %%g4\n\t" \
187 "brz,pt %%o7, 1f\n\t" \
188 " mov %%g7, %0\n\t" \
189 "b,a ret_from_syscall\n\t" \
190 "1:\n\t" \
191 : "=&r" (last) \
192 : "0" (task_thread_info(next)), \
193 "i" (TI_WSTATE), "i" (TI_KSP), "i" (TI_NEW_CHILD), \
194 "i" (TI_CWP), "i" (TI_TASK) \
195 : "cc", \
196 "g1", "g2", "g3", "g7", \
197 "l2", "l3", "l4", "l5", "l6", "l7", \
198 "i0", "i1", "i2", "i3", "i4", "i5", \
199 "o0", "o1", "o2", "o3", "o4", "o5", "o7" EXTRA_CLOBBER);\
200 /* If you fuck with this, update ret_from_syscall code too. */ \
201 if (test_thread_flag(TIF_PERFCTR)) { \
202 write_pcr(current_thread_info()->pcr_reg); \
203 reset_pic(); \
205 } while(0)
208 * On SMP systems, when the scheduler does migration-cost autodetection,
209 * it needs a way to flush as much of the CPU's caches as possible.
211 * TODO: fill this in!
213 static inline void sched_cacheflush(void)
217 static inline unsigned long xchg32(__volatile__ unsigned int *m, unsigned int val)
219 unsigned long tmp1, tmp2;
221 __asm__ __volatile__(
222 " membar #StoreLoad | #LoadLoad\n"
223 " mov %0, %1\n"
224 "1: lduw [%4], %2\n"
225 " cas [%4], %2, %0\n"
226 " cmp %2, %0\n"
227 " bne,a,pn %%icc, 1b\n"
228 " mov %1, %0\n"
229 " membar #StoreLoad | #StoreStore\n"
230 : "=&r" (val), "=&r" (tmp1), "=&r" (tmp2)
231 : "0" (val), "r" (m)
232 : "cc", "memory");
233 return val;
236 static inline unsigned long xchg64(__volatile__ unsigned long *m, unsigned long val)
238 unsigned long tmp1, tmp2;
240 __asm__ __volatile__(
241 " membar #StoreLoad | #LoadLoad\n"
242 " mov %0, %1\n"
243 "1: ldx [%4], %2\n"
244 " casx [%4], %2, %0\n"
245 " cmp %2, %0\n"
246 " bne,a,pn %%xcc, 1b\n"
247 " mov %1, %0\n"
248 " membar #StoreLoad | #StoreStore\n"
249 : "=&r" (val), "=&r" (tmp1), "=&r" (tmp2)
250 : "0" (val), "r" (m)
251 : "cc", "memory");
252 return val;
255 #define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
256 #define tas(ptr) (xchg((ptr),1))
258 extern void __xchg_called_with_bad_pointer(void);
260 static __inline__ unsigned long __xchg(unsigned long x, __volatile__ void * ptr,
261 int size)
263 switch (size) {
264 case 4:
265 return xchg32(ptr, x);
266 case 8:
267 return xchg64(ptr, x);
269 __xchg_called_with_bad_pointer();
270 return x;
273 extern void die_if_kernel(char *str, struct pt_regs *regs) __attribute__ ((noreturn));
276 * Atomic compare and exchange. Compare OLD with MEM, if identical,
277 * store NEW in MEM. Return the initial value in MEM. Success is
278 * indicated by comparing RETURN with OLD.
281 #define __HAVE_ARCH_CMPXCHG 1
283 static __inline__ unsigned long
284 __cmpxchg_u32(volatile int *m, int old, int new)
286 __asm__ __volatile__("membar #StoreLoad | #LoadLoad\n"
287 "cas [%2], %3, %0\n\t"
288 "membar #StoreLoad | #StoreStore"
289 : "=&r" (new)
290 : "0" (new), "r" (m), "r" (old)
291 : "memory");
293 return new;
296 static __inline__ unsigned long
297 __cmpxchg_u64(volatile long *m, unsigned long old, unsigned long new)
299 __asm__ __volatile__("membar #StoreLoad | #LoadLoad\n"
300 "casx [%2], %3, %0\n\t"
301 "membar #StoreLoad | #StoreStore"
302 : "=&r" (new)
303 : "0" (new), "r" (m), "r" (old)
304 : "memory");
306 return new;
309 /* This function doesn't exist, so you'll get a linker error
310 if something tries to do an invalid cmpxchg(). */
311 extern void __cmpxchg_called_with_bad_pointer(void);
313 static __inline__ unsigned long
314 __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
316 switch (size) {
317 case 4:
318 return __cmpxchg_u32(ptr, old, new);
319 case 8:
320 return __cmpxchg_u64(ptr, old, new);
322 __cmpxchg_called_with_bad_pointer();
323 return old;
326 #define cmpxchg(ptr,o,n) \
327 ({ \
328 __typeof__(*(ptr)) _o_ = (o); \
329 __typeof__(*(ptr)) _n_ = (n); \
330 (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \
331 (unsigned long)_n_, sizeof(*(ptr))); \
334 #endif /* !(__ASSEMBLY__) */
336 #define arch_align_stack(x) (x)
338 #endif /* !(__SPARC64_SYSTEM_H) */