ocfs2: Add reflinked file's inode to inode hash eariler.

[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / arch / powerpc / sysdev / qe_lib / qe.c

/*
 * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
 *
 * Authors:     Shlomi Gridish <gridish@freescale.com>
 *              Li Yang <leoli@freescale.com>
 * Based on cpm2_common.c from Dan Malek (dmalek@jlc.net)
 *
 * Description:
 * General Purpose functions for the global management of the
 * QUICC Engine (QE).
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/string.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/bootmem.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/crc32.h>
#include <asm/irq.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/immap_qe.h>
#include <asm/qe.h>
#include <asm/prom.h>
#include <asm/rheap.h>

static void qe_snums_init(void);
static int qe_sdma_init(void);

static DEFINE_SPINLOCK(qe_lock);
DEFINE_SPINLOCK(cmxgcr_lock);
EXPORT_SYMBOL(cmxgcr_lock);

/* QE snum state */
enum qe_snum_state {
        QE_SNUM_STATE_USED,
        QE_SNUM_STATE_FREE
};

/* QE snum */
struct qe_snum {
        u8 num;
        enum qe_snum_state state;
};

/* We allocate this here because it is used almost exclusively for
 * the communication processor devices.
 */
struct qe_immap __iomem *qe_immr;
EXPORT_SYMBOL(qe_immr);

static struct qe_snum snums[QE_NUM_OF_SNUM];    /* Dynamically allocated SNUMs */
static unsigned int qe_num_of_snum;

static phys_addr_t qebase = -1;

int qe_alive_during_sleep(void)
{
        static int ret = -1;

        if (ret != -1)
                return ret;

        ret = !of_find_compatible_node(NULL, NULL, "fsl,mpc8569-pmc");

        return ret;
}
EXPORT_SYMBOL(qe_alive_during_sleep);

phys_addr_t get_qe_base(void)
{
        struct device_node *qe;
        int size;
        const u32 *prop;

        if (qebase != -1)
                return qebase;

        qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
        if (!qe) {
                qe = of_find_node_by_type(NULL, "qe");
                if (!qe)
                        return qebase;
        }

        prop = of_get_property(qe, "reg", &size);
        if (prop && size >= sizeof(*prop))
                qebase = of_translate_address(qe, prop);
        of_node_put(qe);

        return qebase;
}

EXPORT_SYMBOL(get_qe_base);

void __init qe_reset(void)
{
        if (qe_immr == NULL)
                qe_immr = ioremap(get_qe_base(), QE_IMMAP_SIZE);

        qe_snums_init();

        qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID,
                     QE_CR_PROTOCOL_UNSPECIFIED, 0);

        /* Reclaim the MURAM memory for our use. */
        qe_muram_init();

        if (qe_sdma_init())
                panic("sdma init failed!");
}

int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input)
{
        unsigned long flags;
        u8 mcn_shift = 0, dev_shift = 0;
        u32 ret;

        spin_lock_irqsave(&qe_lock, flags);
        if (cmd == QE_RESET) {
                out_be32(&qe_immr->cp.cecr, (u32) (cmd | QE_CR_FLG));
        } else {
                if (cmd == QE_ASSIGN_PAGE) {
                        /* Here device is the SNUM, not sub-block */
                        dev_shift = QE_CR_SNUM_SHIFT;
                } else if (cmd == QE_ASSIGN_RISC) {
                        /* Here device is the SNUM, and mcnProtocol is
                         * e_QeCmdRiscAssignment value */
                        dev_shift = QE_CR_SNUM_SHIFT;
                        mcn_shift = QE_CR_MCN_RISC_ASSIGN_SHIFT;
                } else {
                        if (device == QE_CR_SUBBLOCK_USB)
                                mcn_shift = QE_CR_MCN_USB_SHIFT;
                        else
                                mcn_shift = QE_CR_MCN_NORMAL_SHIFT;
                }

                out_be32(&qe_immr->cp.cecdr, cmd_input);
                out_be32(&qe_immr->cp.cecr,
                         (cmd | QE_CR_FLG | ((u32) device << dev_shift) | (u32)
                          mcn_protocol << mcn_shift));
        }

        /* wait for the QE_CR_FLG to clear */
        ret = spin_event_timeout((in_be32(&qe_immr->cp.cecr) & QE_CR_FLG) == 0,
                           100, 0);
        /* On timeout (e.g. failure), the expression will be false (ret == 0),
           otherwise it will be true (ret == 1). */
        spin_unlock_irqrestore(&qe_lock, flags);

        return ret == 1;
}
EXPORT_SYMBOL(qe_issue_cmd);

/* Set a baud rate generator. This needs lots of work. There are
 * 16 BRGs, which can be connected to the QE channels or output
 * as clocks. The BRGs are in two different block of internal
 * memory mapped space.
 * The BRG clock is the QE clock divided by 2.
 * It was set up long ago during the initial boot phase and is
 * is given to us.
 * Baud rate clocks are zero-based in the driver code (as that maps
 * to port numbers). Documentation uses 1-based numbering.
 */
static unsigned int brg_clk = 0;

unsigned int qe_get_brg_clk(void)
{
        struct device_node *qe;
        int size;
        const u32 *prop;

        if (brg_clk)
                return brg_clk;

        qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
        if (!qe) {
                qe = of_find_node_by_type(NULL, "qe");
                if (!qe)
                        return brg_clk;
        }

        prop = of_get_property(qe, "brg-frequency", &size);
        if (prop && size == sizeof(*prop))
                brg_clk = *prop;

        of_node_put(qe);

        return brg_clk;
}
EXPORT_SYMBOL(qe_get_brg_clk);

/* Program the BRG to the given sampling rate and multiplier
 *
 * @brg: the BRG, QE_BRG1 - QE_BRG16
 * @rate: the desired sampling rate
 * @multiplier: corresponds to the value programmed in GUMR_L[RDCR] or
 * GUMR_L[TDCR].  E.g., if this BRG is the RX clock, and GUMR_L[RDCR]=01,
 * then 'multiplier' should be 8.
 */
int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier)
{
        u32 divisor, tempval;
        u32 div16 = 0;

        if ((brg < QE_BRG1) || (brg > QE_BRG16))
                return -EINVAL;

        divisor = qe_get_brg_clk() / (rate * multiplier);

        if (divisor > QE_BRGC_DIVISOR_MAX + 1) {
                div16 = QE_BRGC_DIV16;
                divisor /= 16;
        }

        /* Errata QE_General4, which affects some MPC832x and MPC836x SOCs, says
           that the BRG divisor must be even if you're not using divide-by-16
           mode. */
        if (!div16 && (divisor & 1))
                divisor++;

        tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) |
                QE_BRGC_ENABLE | div16;

        out_be32(&qe_immr->brg.brgc[brg - QE_BRG1], tempval);

        return 0;
}
EXPORT_SYMBOL(qe_setbrg);

/* Convert a string to a QE clock source enum
 *
 * This function takes a string, typically from a property in the device
 * tree, and returns the corresponding "enum qe_clock" value.
*/
enum qe_clock qe_clock_source(const char *source)
{
        unsigned int i;

        if (strcasecmp(source, "none") == 0)
                return QE_CLK_NONE;

        if (strncasecmp(source, "brg", 3) == 0) {
                i = simple_strtoul(source + 3, NULL, 10);
                if ((i >= 1) && (i <= 16))
                        return (QE_BRG1 - 1) + i;
                else
                        return QE_CLK_DUMMY;
        }

        if (strncasecmp(source, "clk", 3) == 0) {
                i = simple_strtoul(source + 3, NULL, 10);
                if ((i >= 1) && (i <= 24))
                        return (QE_CLK1 - 1) + i;
                else
                        return QE_CLK_DUMMY;
        }

        return QE_CLK_DUMMY;
}
EXPORT_SYMBOL(qe_clock_source);

/* Initialize SNUMs (thread serial numbers) according to
 * QE Module Control chapter, SNUM table
 */
static void qe_snums_init(void)
{
        int i;
        static const u8 snum_init[] = {
                0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D,
                0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89,
                0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9,
                0xD8, 0xD9, 0xE8, 0xE9, 0x08, 0x09, 0x18, 0x19,
                0x28, 0x29, 0x38, 0x39, 0x48, 0x49, 0x58, 0x59,
                0x68, 0x69, 0x78, 0x79, 0x80, 0x81,
        };

        qe_num_of_snum = qe_get_num_of_snums();

        for (i = 0; i < qe_num_of_snum; i++) {
                snums[i].num = snum_init[i];
                snums[i].state = QE_SNUM_STATE_FREE;
        }
}

int qe_get_snum(void)
{
        unsigned long flags;
        int snum = -EBUSY;
        int i;

        spin_lock_irqsave(&qe_lock, flags);
        for (i = 0; i < qe_num_of_snum; i++) {
                if (snums[i].state == QE_SNUM_STATE_FREE) {
                        snums[i].state = QE_SNUM_STATE_USED;
                        snum = snums[i].num;
                        break;
                }
        }
        spin_unlock_irqrestore(&qe_lock, flags);

        return snum;
}
EXPORT_SYMBOL(qe_get_snum);

void qe_put_snum(u8 snum)
{
        int i;

        for (i = 0; i < qe_num_of_snum; i++) {
                if (snums[i].num == snum) {
                        snums[i].state = QE_SNUM_STATE_FREE;
                        break;
                }
        }
}
EXPORT_SYMBOL(qe_put_snum);

static int qe_sdma_init(void)
{
        struct sdma __iomem *sdma = &qe_immr->sdma;
        unsigned long sdma_buf_offset;

        if (!sdma)
                return -ENODEV;

        /* allocate 2 internal temporary buffers (512 bytes size each) for
         * the SDMA */
        sdma_buf_offset = qe_muram_alloc(512 * 2, 4096);
        if (IS_ERR_VALUE(sdma_buf_offset))
                return -ENOMEM;

        out_be32(&sdma->sdebcr, (u32) sdma_buf_offset & QE_SDEBCR_BA_MASK);
        out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK |
                                        (0x1 << QE_SDMR_CEN_SHIFT)));

        return 0;
}

/* The maximum number of RISCs we support */
#define MAX_QE_RISC     2

/* Firmware information stored here for qe_get_firmware_info() */
static struct qe_firmware_info qe_firmware_info;

/*
 * Set to 1 if QE firmware has been uploaded, and therefore
 * qe_firmware_info contains valid data.
 */
static int qe_firmware_uploaded;

/*
 * Upload a QE microcode
 *
 * This function is a worker function for qe_upload_firmware().  It does
 * the actual uploading of the microcode.
 */
static void qe_upload_microcode(const void *base,
        const struct qe_microcode *ucode)
{
        const __be32 *code = base + be32_to_cpu(ucode->code_offset);
        unsigned int i;

        if (ucode->major || ucode->minor || ucode->revision)
                printk(KERN_INFO "qe-firmware: "
                        "uploading microcode '%s' version %u.%u.%u\n",
                        ucode->id, ucode->major, ucode->minor, ucode->revision);
        else
                printk(KERN_INFO "qe-firmware: "
                        "uploading microcode '%s'\n", ucode->id);

        /* Use auto-increment */
        out_be32(&qe_immr->iram.iadd, be32_to_cpu(ucode->iram_offset) |
                QE_IRAM_IADD_AIE | QE_IRAM_IADD_BADDR);

        for (i = 0; i < be32_to_cpu(ucode->count); i++)
                out_be32(&qe_immr->iram.idata, be32_to_cpu(code[i]));
}

/*
 * Upload a microcode to the I-RAM at a specific address.
 *
 * See Documentation/powerpc/qe-firmware.txt for information on QE microcode
 * uploading.
 *
 * Currently, only version 1 is supported, so the 'version' field must be
 * set to 1.
 *
 * The SOC model and revision are not validated, they are only displayed for
 * informational purposes.
 *
 * 'calc_size' is the calculated size, in bytes, of the firmware structure and
 * all of the microcode structures, minus the CRC.
 *
 * 'length' is the size that the structure says it is, including the CRC.
 */
int qe_upload_firmware(const struct qe_firmware *firmware)
{
        unsigned int i;
        unsigned int j;
        u32 crc;
        size_t calc_size = sizeof(struct qe_firmware);
        size_t length;
        const struct qe_header *hdr;

        if (!firmware) {
                printk(KERN_ERR "qe-firmware: invalid pointer\n");
                return -EINVAL;
        }

        hdr = &firmware->header;
        length = be32_to_cpu(hdr->length);

        /* Check the magic */
        if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') ||
            (hdr->magic[2] != 'F')) {
                printk(KERN_ERR "qe-firmware: not a microcode\n");
                return -EPERM;
        }

        /* Check the version */
        if (hdr->version != 1) {
                printk(KERN_ERR "qe-firmware: unsupported version\n");
                return -EPERM;
        }

        /* Validate some of the fields */
        if ((firmware->count < 1) || (firmware->count > MAX_QE_RISC)) {
                printk(KERN_ERR "qe-firmware: invalid data\n");
                return -EINVAL;
        }

        /* Validate the length and check if there's a CRC */
        calc_size += (firmware->count - 1) * sizeof(struct qe_microcode);

        for (i = 0; i < firmware->count; i++)
                /*
                 * For situations where the second RISC uses the same microcode
                 * as the first, the 'code_offset' and 'count' fields will be
                 * zero, so it's okay to add those.
                 */
                calc_size += sizeof(__be32) *
                        be32_to_cpu(firmware->microcode[i].count);

        /* Validate the length */
        if (length != calc_size + sizeof(__be32)) {
                printk(KERN_ERR "qe-firmware: invalid length\n");
                return -EPERM;
        }

        /* Validate the CRC */
        crc = be32_to_cpu(*(__be32 *)((void *)firmware + calc_size));
        if (crc != crc32(0, firmware, calc_size)) {
                printk(KERN_ERR "qe-firmware: firmware CRC is invalid\n");
                return -EIO;
        }

        /*
         * If the microcode calls for it, split the I-RAM.
         */
        if (!firmware->split)
                setbits16(&qe_immr->cp.cercr, QE_CP_CERCR_CIR);

        if (firmware->soc.model)
                printk(KERN_INFO
                        "qe-firmware: firmware '%s' for %u V%u.%u\n",
                        firmware->id, be16_to_cpu(firmware->soc.model),
                        firmware->soc.major, firmware->soc.minor);
        else
                printk(KERN_INFO "qe-firmware: firmware '%s'\n",
                        firmware->id);

        /*
         * The QE only supports one microcode per RISC, so clear out all the
         * saved microcode information and put in the new.
         */
        memset(&qe_firmware_info, 0, sizeof(qe_firmware_info));
        strcpy(qe_firmware_info.id, firmware->id);
        qe_firmware_info.extended_modes = firmware->extended_modes;
        memcpy(qe_firmware_info.vtraps, firmware->vtraps,
                sizeof(firmware->vtraps));

        /* Loop through each microcode. */
        for (i = 0; i < firmware->count; i++) {
                const struct qe_microcode *ucode = &firmware->microcode[i];

                /* Upload a microcode if it's present */
                if (ucode->code_offset)
                        qe_upload_microcode(firmware, ucode);

                /* Program the traps for this processor */
                for (j = 0; j < 16; j++) {
                        u32 trap = be32_to_cpu(ucode->traps[j]);

                        if (trap)
                                out_be32(&qe_immr->rsp[i].tibcr[j], trap);
                }

                /* Enable traps */
                out_be32(&qe_immr->rsp[i].eccr, be32_to_cpu(ucode->eccr));
        }

        qe_firmware_uploaded = 1;

        return 0;
}
EXPORT_SYMBOL(qe_upload_firmware);

/*
 * Get info on the currently-loaded firmware
 *
 * This function also checks the device tree to see if the boot loader has
 * uploaded a firmware already.
 */
struct qe_firmware_info *qe_get_firmware_info(void)
{
        static int initialized;
        struct property *prop;
        struct device_node *qe;
        struct device_node *fw = NULL;
        const char *sprop;
        unsigned int i;

        /*
         * If we haven't checked yet, and a driver hasn't uploaded a firmware
         * yet, then check the device tree for information.
         */
        if (qe_firmware_uploaded)
                return &qe_firmware_info;

        if (initialized)
                return NULL;

        initialized = 1;

        /*
         * Newer device trees have an "fsl,qe" compatible property for the QE
         * node, but we still need to support older device trees.
        */
        qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
        if (!qe) {
                qe = of_find_node_by_type(NULL, "qe");
                if (!qe)
                        return NULL;
        }

        /* Find the 'firmware' child node */
        for_each_child_of_node(qe, fw) {
                if (strcmp(fw->name, "firmware") == 0)
                        break;
        }

        of_node_put(qe);

        /* Did we find the 'firmware' node? */
        if (!fw)
                return NULL;

        qe_firmware_uploaded = 1;

        /* Copy the data into qe_firmware_info*/
        sprop = of_get_property(fw, "id", NULL);
        if (sprop)
                strncpy(qe_firmware_info.id, sprop,
                        sizeof(qe_firmware_info.id) - 1);

        prop = of_find_property(fw, "extended-modes", NULL);
        if (prop && (prop->length == sizeof(u64))) {
                const u64 *iprop = prop->value;

                qe_firmware_info.extended_modes = *iprop;
        }

        prop = of_find_property(fw, "virtual-traps", NULL);
        if (prop && (prop->length == 32)) {
                const u32 *iprop = prop->value;

                for (i = 0; i < ARRAY_SIZE(qe_firmware_info.vtraps); i++)
                        qe_firmware_info.vtraps[i] = iprop[i];
        }

        of_node_put(fw);

        return &qe_firmware_info;
}
EXPORT_SYMBOL(qe_get_firmware_info);

unsigned int qe_get_num_of_risc(void)
{
        struct device_node *qe;
        int size;
        unsigned int num_of_risc = 0;
        const u32 *prop;

        qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
        if (!qe) {
                /* Older devices trees did not have an "fsl,qe"
                 * compatible property, so we need to look for
                 * the QE node by name.
                 */
                qe = of_find_node_by_type(NULL, "qe");
                if (!qe)
                        return num_of_risc;
        }

        prop = of_get_property(qe, "fsl,qe-num-riscs", &size);
        if (prop && size == sizeof(*prop))
                num_of_risc = *prop;

        of_node_put(qe);

        return num_of_risc;
}
EXPORT_SYMBOL(qe_get_num_of_risc);

unsigned int qe_get_num_of_snums(void)
{
        struct device_node *qe;
        int size;
        unsigned int num_of_snums;
        const u32 *prop;

        num_of_snums = 28; /* The default number of snum for threads is 28 */
        qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
        if (!qe) {
                /* Older devices trees did not have an "fsl,qe"
                 * compatible property, so we need to look for
                 * the QE node by name.
                 */
                qe = of_find_node_by_type(NULL, "qe");
                if (!qe)
                        return num_of_snums;
        }

        prop = of_get_property(qe, "fsl,qe-num-snums", &size);
        if (prop && size == sizeof(*prop)) {
                num_of_snums = *prop;
                if ((num_of_snums < 28) || (num_of_snums > QE_NUM_OF_SNUM)) {
                        /* No QE ever has fewer than 28 SNUMs */
                        pr_err("QE: number of snum is invalid\n");
                        return -EINVAL;
                }
        }

        of_node_put(qe);

        return num_of_snums;
}
EXPORT_SYMBOL(qe_get_num_of_snums);