isci: remove compile-time (Kconfig) silicon configuration
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / scsi / isci / init.c
blob6c2d686fe7c0efffb2f3f9c8a15456a5f3ae278e
1 /*
2 * This file is provided under a dual BSD/GPLv2 license. When using or
3 * redistributing this file, you may do so under either license.
5 * GPL LICENSE SUMMARY
7 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of version 2 of the GNU General Public License as
11 * published by the Free Software Foundation.
13 * This program is distributed in the hope that it will be useful, but
14 * WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16 * General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
21 * The full GNU General Public License is included in this distribution
22 * in the file called LICENSE.GPL.
24 * BSD LICENSE
26 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
27 * All rights reserved.
29 * Redistribution and use in source and binary forms, with or without
30 * modification, are permitted provided that the following conditions
31 * are met:
33 * * Redistributions of source code must retain the above copyright
34 * notice, this list of conditions and the following disclaimer.
35 * * Redistributions in binary form must reproduce the above copyright
36 * notice, this list of conditions and the following disclaimer in
37 * the documentation and/or other materials provided with the
38 * distribution.
39 * * Neither the name of Intel Corporation nor the names of its
40 * contributors may be used to endorse or promote products derived
41 * from this software without specific prior written permission.
43 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
44 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
45 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
46 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
47 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
48 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
49 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
50 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
51 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
52 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
53 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
56 #include <linux/kernel.h>
57 #include <linux/init.h>
58 #include <linux/module.h>
59 #include <linux/firmware.h>
60 #include <linux/efi.h>
61 #include <asm/string.h>
62 #include "isci.h"
63 #include "task.h"
64 #include "sci_controller_constants.h"
65 #include "sci_environment.h"
66 #include "probe_roms.h"
68 static struct scsi_transport_template *isci_transport_template;
70 static DEFINE_PCI_DEVICE_TABLE(isci_id_table) = {
71 { PCI_VDEVICE(INTEL, 0x1D61),},
72 { PCI_VDEVICE(INTEL, 0x1D63),},
73 { PCI_VDEVICE(INTEL, 0x1D65),},
74 { PCI_VDEVICE(INTEL, 0x1D67),},
75 { PCI_VDEVICE(INTEL, 0x1D69),},
76 { PCI_VDEVICE(INTEL, 0x1D6B),},
77 { PCI_VDEVICE(INTEL, 0x1D60),},
78 { PCI_VDEVICE(INTEL, 0x1D62),},
79 { PCI_VDEVICE(INTEL, 0x1D64),},
80 { PCI_VDEVICE(INTEL, 0x1D66),},
81 { PCI_VDEVICE(INTEL, 0x1D68),},
82 { PCI_VDEVICE(INTEL, 0x1D6A),},
86 MODULE_DEVICE_TABLE(pci, isci_id_table);
88 /* linux isci specific settings */
90 int isci_si_rev = ISCI_SI_REVA2;
91 module_param(isci_si_rev, int, 0);
92 MODULE_PARM_DESC(isci_si_rev, "(deprecated) override default si rev (0: A0 1: A2 2: B0)");
94 unsigned char no_outbound_task_to = 20;
95 module_param(no_outbound_task_to, byte, 0);
96 MODULE_PARM_DESC(no_outbound_task_to, "No Outbound Task Timeout (1us incr)");
98 u16 ssp_max_occ_to = 20;
99 module_param(ssp_max_occ_to, ushort, 0);
100 MODULE_PARM_DESC(ssp_max_occ_to, "SSP Max occupancy timeout (100us incr)");
102 u16 stp_max_occ_to = 5;
103 module_param(stp_max_occ_to, ushort, 0);
104 MODULE_PARM_DESC(stp_max_occ_to, "STP Max occupancy timeout (100us incr)");
106 u16 ssp_inactive_to = 5;
107 module_param(ssp_inactive_to, ushort, 0);
108 MODULE_PARM_DESC(ssp_inactive_to, "SSP inactivity timeout (100us incr)");
110 u16 stp_inactive_to = 5;
111 module_param(stp_inactive_to, ushort, 0);
112 MODULE_PARM_DESC(stp_inactive_to, "STP inactivity timeout (100us incr)");
114 unsigned char phy_gen = 3;
115 module_param(phy_gen, byte, 0);
116 MODULE_PARM_DESC(phy_gen, "PHY generation (1: 1.5Gbps 2: 3.0Gbps 3: 6.0Gbps)");
118 unsigned char max_concurr_spinup = 1;
119 module_param(max_concurr_spinup, byte, 0);
120 MODULE_PARM_DESC(max_concurr_spinup, "Max concurrent device spinup");
122 static struct scsi_host_template isci_sht = {
124 .module = THIS_MODULE,
125 .name = DRV_NAME,
126 .proc_name = DRV_NAME,
127 .queuecommand = sas_queuecommand,
128 .target_alloc = sas_target_alloc,
129 .slave_configure = sas_slave_configure,
130 .slave_destroy = sas_slave_destroy,
131 .scan_finished = isci_host_scan_finished,
132 .scan_start = isci_host_scan_start,
133 .change_queue_depth = sas_change_queue_depth,
134 .change_queue_type = sas_change_queue_type,
135 .bios_param = sas_bios_param,
136 .can_queue = ISCI_CAN_QUEUE_VAL,
137 .cmd_per_lun = 1,
138 .this_id = -1,
139 .sg_tablesize = SG_ALL,
140 .max_sectors = SCSI_DEFAULT_MAX_SECTORS,
141 .use_clustering = ENABLE_CLUSTERING,
142 .eh_device_reset_handler = sas_eh_device_reset_handler,
143 .eh_bus_reset_handler = isci_bus_reset_handler,
144 .slave_alloc = sas_slave_alloc,
145 .target_destroy = sas_target_destroy,
146 .ioctl = sas_ioctl,
149 static struct sas_domain_function_template isci_transport_ops = {
151 /* The class calls these to notify the LLDD of an event. */
152 .lldd_port_formed = isci_port_formed,
153 .lldd_port_deformed = isci_port_deformed,
155 /* The class calls these when a device is found or gone. */
156 .lldd_dev_found = isci_remote_device_found,
157 .lldd_dev_gone = isci_remote_device_gone,
159 .lldd_execute_task = isci_task_execute_task,
160 /* Task Management Functions. Must be called from process context. */
161 .lldd_abort_task = isci_task_abort_task,
162 .lldd_abort_task_set = isci_task_abort_task_set,
163 .lldd_clear_aca = isci_task_clear_aca,
164 .lldd_clear_task_set = isci_task_clear_task_set,
165 .lldd_I_T_nexus_reset = isci_task_I_T_nexus_reset,
166 .lldd_lu_reset = isci_task_lu_reset,
167 .lldd_query_task = isci_task_query_task,
169 /* Port and Adapter management */
170 .lldd_clear_nexus_port = isci_task_clear_nexus_port,
171 .lldd_clear_nexus_ha = isci_task_clear_nexus_ha,
173 /* Phy management */
174 .lldd_control_phy = isci_phy_control,
178 /******************************************************************************
179 * P R O T E C T E D M E T H O D S
180 ******************************************************************************/
185 * isci_register_sas_ha() - This method initializes various lldd
186 * specific members of the sas_ha struct and calls the libsas
187 * sas_register_ha() function.
188 * @isci_host: This parameter specifies the lldd specific wrapper for the
189 * libsas sas_ha struct.
191 * This method returns an error code indicating sucess or failure. The user
192 * should check for possible memory allocation error return otherwise, a zero
193 * indicates success.
195 static int isci_register_sas_ha(struct isci_host *isci_host)
197 int i;
198 struct sas_ha_struct *sas_ha = &(isci_host->sas_ha);
199 struct asd_sas_phy **sas_phys;
200 struct asd_sas_port **sas_ports;
202 sas_phys = devm_kzalloc(&isci_host->pdev->dev,
203 SCI_MAX_PHYS * sizeof(void *),
204 GFP_KERNEL);
205 if (!sas_phys)
206 return -ENOMEM;
208 sas_ports = devm_kzalloc(&isci_host->pdev->dev,
209 SCI_MAX_PORTS * sizeof(void *),
210 GFP_KERNEL);
211 if (!sas_ports)
212 return -ENOMEM;
214 /*----------------- Libsas Initialization Stuff----------------------
215 * Set various fields in the sas_ha struct:
218 sas_ha->sas_ha_name = DRV_NAME;
219 sas_ha->lldd_module = THIS_MODULE;
220 sas_ha->sas_addr = &isci_host->phys[0].sas_addr[0];
222 /* set the array of phy and port structs. */
223 for (i = 0; i < SCI_MAX_PHYS; i++) {
224 sas_phys[i] = &(isci_host->phys[i].sas_phy);
225 sas_ports[i] = &(isci_host->sas_ports[i]);
228 sas_ha->sas_phy = sas_phys;
229 sas_ha->sas_port = sas_ports;
230 sas_ha->num_phys = SCI_MAX_PHYS;
232 sas_ha->lldd_queue_size = ISCI_CAN_QUEUE_VAL;
233 sas_ha->lldd_max_execute_num = 1;
234 sas_ha->strict_wide_ports = 1;
236 sas_register_ha(sas_ha);
238 return 0;
241 static ssize_t isci_show_id(struct device *dev, struct device_attribute *attr, char *buf)
243 struct Scsi_Host *shost = container_of(dev, typeof(*shost), shost_dev);
244 struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
245 struct isci_host *ihost = container_of(sas_ha, typeof(*ihost), sas_ha);
247 return snprintf(buf, PAGE_SIZE, "%d\n", ihost->id);
250 static DEVICE_ATTR(isci_id, S_IRUGO, isci_show_id, NULL);
252 static void isci_unregister(struct isci_host *isci_host)
254 struct Scsi_Host *shost;
256 if (!isci_host)
257 return;
259 shost = isci_host->shost;
260 device_remove_file(&shost->shost_dev, &dev_attr_isci_id);
262 sas_unregister_ha(&isci_host->sas_ha);
264 sas_remove_host(isci_host->shost);
265 scsi_remove_host(isci_host->shost);
266 scsi_host_put(isci_host->shost);
269 static int __devinit isci_pci_init(struct pci_dev *pdev)
271 int err, bar_num, bar_mask;
272 void __iomem * const *iomap;
274 err = pcim_enable_device(pdev);
275 if (err) {
276 dev_err(&pdev->dev,
277 "failed enable PCI device %s!\n",
278 pci_name(pdev));
279 return err;
282 for (bar_num = 0; bar_num < SCI_PCI_BAR_COUNT; bar_num++)
283 bar_mask |= 1 << (bar_num * 2);
285 err = pcim_iomap_regions(pdev, bar_mask, DRV_NAME);
286 if (err)
287 return err;
289 iomap = pcim_iomap_table(pdev);
290 if (!iomap)
291 return -ENOMEM;
293 pci_set_master(pdev);
295 err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
296 if (err) {
297 err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
298 if (err)
299 return err;
302 err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
303 if (err) {
304 err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
305 if (err)
306 return err;
309 return 0;
312 static int num_controllers(struct pci_dev *pdev)
314 /* bar size alone can tell us if we are running with a dual controller
315 * part, no need to trust revision ids that might be under broken firmware
316 * control
318 resource_size_t scu_bar_size = pci_resource_len(pdev, SCI_SCU_BAR*2);
319 resource_size_t smu_bar_size = pci_resource_len(pdev, SCI_SMU_BAR*2);
321 if (scu_bar_size >= SCI_SCU_BAR_SIZE*SCI_MAX_CONTROLLERS &&
322 smu_bar_size >= SCI_SMU_BAR_SIZE*SCI_MAX_CONTROLLERS)
323 return SCI_MAX_CONTROLLERS;
324 else
325 return 1;
328 static int isci_setup_interrupts(struct pci_dev *pdev)
330 int err, i, num_msix;
331 struct isci_host *ihost;
332 struct isci_pci_info *pci_info = to_pci_info(pdev);
335 * Determine the number of vectors associated with this
336 * PCI function.
338 num_msix = num_controllers(pdev) * SCI_NUM_MSI_X_INT;
340 for (i = 0; i < num_msix; i++)
341 pci_info->msix_entries[i].entry = i;
343 err = pci_enable_msix(pdev, pci_info->msix_entries, num_msix);
344 if (err)
345 goto intx;
347 for (i = 0; i < num_msix; i++) {
348 int id = i / SCI_NUM_MSI_X_INT;
349 struct msix_entry *msix = &pci_info->msix_entries[i];
350 irq_handler_t isr;
352 ihost = pci_info->hosts[id];
353 /* odd numbered vectors are error interrupts */
354 if (i & 1)
355 isr = isci_error_isr;
356 else
357 isr = isci_msix_isr;
359 err = devm_request_irq(&pdev->dev, msix->vector, isr, 0,
360 DRV_NAME"-msix", ihost);
361 if (!err)
362 continue;
364 dev_info(&pdev->dev, "msix setup failed falling back to intx\n");
365 while (i--) {
366 id = i / SCI_NUM_MSI_X_INT;
367 ihost = pci_info->hosts[id];
368 msix = &pci_info->msix_entries[i];
369 devm_free_irq(&pdev->dev, msix->vector, ihost);
371 pci_disable_msix(pdev);
372 goto intx;
374 return 0;
376 intx:
377 for_each_isci_host(i, ihost, pdev) {
378 err = devm_request_irq(&pdev->dev, pdev->irq, isci_intx_isr,
379 IRQF_SHARED, DRV_NAME"-intx", ihost);
380 if (err)
381 break;
383 return err;
386 static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id)
388 struct isci_host *isci_host;
389 struct Scsi_Host *shost;
390 int err;
392 isci_host = devm_kzalloc(&pdev->dev, sizeof(*isci_host), GFP_KERNEL);
393 if (!isci_host)
394 return NULL;
396 isci_host->pdev = pdev;
397 isci_host->id = id;
399 shost = scsi_host_alloc(&isci_sht, sizeof(void *));
400 if (!shost)
401 return NULL;
402 isci_host->shost = shost;
404 err = isci_host_init(isci_host);
405 if (err)
406 goto err_shost;
408 SHOST_TO_SAS_HA(shost) = &isci_host->sas_ha;
409 isci_host->sas_ha.core.shost = shost;
410 shost->transportt = isci_transport_template;
412 shost->max_id = ~0;
413 shost->max_lun = ~0;
414 shost->max_cmd_len = MAX_COMMAND_SIZE;
416 err = scsi_add_host(shost, &pdev->dev);
417 if (err)
418 goto err_shost;
420 err = isci_register_sas_ha(isci_host);
421 if (err)
422 goto err_shost_remove;
424 err = device_create_file(&shost->shost_dev, &dev_attr_isci_id);
425 if (err)
426 goto err_unregister_ha;
428 return isci_host;
430 err_unregister_ha:
431 sas_unregister_ha(&(isci_host->sas_ha));
432 err_shost_remove:
433 scsi_remove_host(shost);
434 err_shost:
435 scsi_host_put(shost);
437 return NULL;
440 static void check_si_rev(struct pci_dev *pdev)
442 if (num_controllers(pdev) > 1)
443 isci_si_rev = ISCI_SI_REVB0;
444 else {
445 switch (pdev->revision) {
446 case 0:
447 case 1:
448 /* if the id is ambiguous don't update isci_si_rev */
449 break;
450 case 3:
451 isci_si_rev = ISCI_SI_REVA2;
452 break;
453 default:
454 case 4:
455 isci_si_rev = ISCI_SI_REVB0;
456 break;
460 dev_info(&pdev->dev, "driver configured for %s silicon (rev: %d)\n",
461 isci_si_rev == ISCI_SI_REVA0 ? "A0" :
462 isci_si_rev == ISCI_SI_REVA2 ? "A2" : "B0", pdev->revision);
466 static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
468 struct isci_pci_info *pci_info;
469 int err, i;
470 struct isci_host *isci_host;
471 const struct firmware *fw = NULL;
472 struct isci_orom *orom = NULL;
473 char *source = "(platform)";
475 check_si_rev(pdev);
477 pci_info = devm_kzalloc(&pdev->dev, sizeof(*pci_info), GFP_KERNEL);
478 if (!pci_info)
479 return -ENOMEM;
480 pci_set_drvdata(pdev, pci_info);
482 if (efi_enabled)
483 orom = isci_get_efi_var(pdev);
485 if (!orom)
486 orom = isci_request_oprom(pdev);
488 for (i = 0; orom && i < ARRAY_SIZE(orom->ctrl); i++) {
489 if (scic_oem_parameters_validate(&orom->ctrl[i])) {
490 dev_warn(&pdev->dev,
491 "[%d]: invalid oem parameters detected, falling back to firmware\n", i);
492 devm_kfree(&pdev->dev, orom);
493 orom = NULL;
494 break;
498 if (!orom) {
499 source = "(firmware)";
500 orom = isci_request_firmware(pdev, fw);
501 if (!orom) {
502 /* TODO convert this to WARN_TAINT_ONCE once the
503 * orom/efi parameter support is widely available
505 dev_warn(&pdev->dev,
506 "Loading user firmware failed, using default "
507 "values\n");
508 dev_warn(&pdev->dev,
509 "Default OEM configuration being used: 4 "
510 "narrow ports, and default SAS Addresses\n");
514 if (orom)
515 dev_info(&pdev->dev,
516 "OEM SAS parameters (version: %u.%u) loaded %s\n",
517 (orom->hdr.version & 0xf0) >> 4,
518 (orom->hdr.version & 0xf), source);
520 pci_info->orom = orom;
522 err = isci_pci_init(pdev);
523 if (err)
524 return err;
526 for (i = 0; i < num_controllers(pdev); i++) {
527 struct isci_host *h = isci_host_alloc(pdev, i);
529 if (!h) {
530 err = -ENOMEM;
531 goto err_host_alloc;
533 pci_info->hosts[i] = h;
536 err = isci_setup_interrupts(pdev);
537 if (err)
538 goto err_host_alloc;
540 for_each_isci_host(i, isci_host, pdev)
541 scsi_scan_host(isci_host->shost);
543 return 0;
545 err_host_alloc:
546 for_each_isci_host(i, isci_host, pdev)
547 isci_unregister(isci_host);
548 return err;
551 static void __devexit isci_pci_remove(struct pci_dev *pdev)
553 struct isci_host *isci_host;
554 int i;
556 for_each_isci_host(i, isci_host, pdev) {
557 isci_unregister(isci_host);
558 isci_host_deinit(isci_host);
559 scic_controller_disable_interrupts(isci_host->core_controller);
563 static struct pci_driver isci_pci_driver = {
564 .name = DRV_NAME,
565 .id_table = isci_id_table,
566 .probe = isci_pci_probe,
567 .remove = __devexit_p(isci_pci_remove),
570 static __init int isci_init(void)
572 int err;
574 pr_info("%s: Intel(R) C600 SAS Controller Driver\n", DRV_NAME);
576 isci_transport_template = sas_domain_attach_transport(&isci_transport_ops);
577 if (!isci_transport_template)
578 return -ENOMEM;
580 err = pci_register_driver(&isci_pci_driver);
581 if (err)
582 sas_release_transport(isci_transport_template);
584 return err;
587 static __exit void isci_exit(void)
589 pci_unregister_driver(&isci_pci_driver);
590 sas_release_transport(isci_transport_template);
593 MODULE_LICENSE("Dual BSD/GPL");
594 MODULE_FIRMWARE(ISCI_FW_NAME);
595 module_init(isci_init);
596 module_exit(isci_exit);