Merge branch 'next-s5pv310' into for-next
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / arch / arm / plat-omap / debug-leds.c
blobfc05b10226026e6b514adaa10199bf270cbba7f2
1 /*
2 * linux/arch/arm/plat-omap/debug-leds.c
4 * Copyright 2003 by Texas Instruments Incorporated
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
11 #include <linux/init.h>
12 #include <linux/platform_device.h>
13 #include <linux/leds.h>
14 #include <linux/io.h>
16 #include <mach/hardware.h>
17 #include <asm/leds.h>
18 #include <asm/system.h>
19 #include <asm/mach-types.h>
21 #include <plat/fpga.h>
22 #include <mach/gpio.h>
25 /* Many OMAP development platforms reuse the same "debug board"; these
26 * platforms include H2, H3, H4, and Perseus2. There are 16 LEDs on the
27 * debug board (all green), accessed through FPGA registers.
29 * The "surfer" expansion board and H2 sample board also have two-color
30 * green+red LEDs (in parallel), used here for timer and idle indicators
31 * in preference to the ones on the debug board, for a "Disco LED" effect.
33 * This driver exports either the original ARM LED API, the new generic
34 * one, or both.
37 static spinlock_t lock;
38 static struct h2p2_dbg_fpga __iomem *fpga;
39 static u16 led_state, hw_led_state;
42 #ifdef CONFIG_OMAP_DEBUG_LEDS
43 #define new_led_api() 1
44 #else
45 #define new_led_api() 0
46 #endif
49 /*-------------------------------------------------------------------------*/
51 /* original ARM debug LED API:
52 * - timer and idle leds (some boards use non-FPGA leds here);
53 * - up to 4 generic leds, easily accessed in-kernel (any context)
56 #define GPIO_LED_RED 3
57 #define GPIO_LED_GREEN OMAP_MPUIO(4)
59 #define LED_STATE_ENABLED 0x01
60 #define LED_STATE_CLAIMED 0x02
61 #define LED_TIMER_ON 0x04
63 #define GPIO_IDLE GPIO_LED_GREEN
64 #define GPIO_TIMER GPIO_LED_RED
66 static void h2p2_dbg_leds_event(led_event_t evt)
68 unsigned long flags;
70 spin_lock_irqsave(&lock, flags);
72 if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
73 goto done;
75 switch (evt) {
76 case led_start:
77 if (fpga)
78 led_state |= LED_STATE_ENABLED;
79 break;
81 case led_stop:
82 case led_halted:
83 /* all leds off during suspend or shutdown */
85 if (!(machine_is_omap_perseus2() || machine_is_omap_h4())) {
86 gpio_set_value(GPIO_TIMER, 0);
87 gpio_set_value(GPIO_IDLE, 0);
90 __raw_writew(~0, &fpga->leds);
91 led_state &= ~LED_STATE_ENABLED;
92 goto done;
94 case led_claim:
95 led_state |= LED_STATE_CLAIMED;
96 hw_led_state = 0;
97 break;
99 case led_release:
100 led_state &= ~LED_STATE_CLAIMED;
101 break;
103 #ifdef CONFIG_LEDS_TIMER
104 case led_timer:
105 led_state ^= LED_TIMER_ON;
107 if (machine_is_omap_perseus2() || machine_is_omap_h4())
108 hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER;
109 else {
110 gpio_set_value(GPIO_TIMER,
111 led_state & LED_TIMER_ON);
112 goto done;
115 break;
116 #endif
118 #ifdef CONFIG_LEDS_CPU
119 /* LED lit iff busy */
120 case led_idle_start:
121 if (machine_is_omap_perseus2() || machine_is_omap_h4())
122 hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE;
123 else {
124 gpio_set_value(GPIO_IDLE, 1);
125 goto done;
128 break;
130 case led_idle_end:
131 if (machine_is_omap_perseus2() || machine_is_omap_h4())
132 hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE;
133 else {
134 gpio_set_value(GPIO_IDLE, 0);
135 goto done;
138 break;
139 #endif
141 case led_green_on:
142 hw_led_state |= H2P2_DBG_FPGA_LED_GREEN;
143 break;
144 case led_green_off:
145 hw_led_state &= ~H2P2_DBG_FPGA_LED_GREEN;
146 break;
148 case led_amber_on:
149 hw_led_state |= H2P2_DBG_FPGA_LED_AMBER;
150 break;
151 case led_amber_off:
152 hw_led_state &= ~H2P2_DBG_FPGA_LED_AMBER;
153 break;
155 case led_red_on:
156 hw_led_state |= H2P2_DBG_FPGA_LED_RED;
157 break;
158 case led_red_off:
159 hw_led_state &= ~H2P2_DBG_FPGA_LED_RED;
160 break;
162 case led_blue_on:
163 hw_led_state |= H2P2_DBG_FPGA_LED_BLUE;
164 break;
165 case led_blue_off:
166 hw_led_state &= ~H2P2_DBG_FPGA_LED_BLUE;
167 break;
169 default:
170 break;
175 * Actually burn the LEDs
177 if (led_state & LED_STATE_ENABLED)
178 __raw_writew(~hw_led_state, &fpga->leds);
180 done:
181 spin_unlock_irqrestore(&lock, flags);
184 /*-------------------------------------------------------------------------*/
186 /* "new" LED API
187 * - with syfs access and generic triggering
188 * - not readily accessible to in-kernel drivers
191 struct dbg_led {
192 struct led_classdev cdev;
193 u16 mask;
196 static struct dbg_led dbg_leds[] = {
197 /* REVISIT at least H2 uses different timer & cpu leds... */
198 #ifndef CONFIG_LEDS_TIMER
199 { .mask = 1 << 0, .cdev.name = "d4:green",
200 .cdev.default_trigger = "heartbeat", },
201 #endif
202 #ifndef CONFIG_LEDS_CPU
203 { .mask = 1 << 1, .cdev.name = "d5:green", }, /* !idle */
204 #endif
205 { .mask = 1 << 2, .cdev.name = "d6:green", },
206 { .mask = 1 << 3, .cdev.name = "d7:green", },
208 { .mask = 1 << 4, .cdev.name = "d8:green", },
209 { .mask = 1 << 5, .cdev.name = "d9:green", },
210 { .mask = 1 << 6, .cdev.name = "d10:green", },
211 { .mask = 1 << 7, .cdev.name = "d11:green", },
213 { .mask = 1 << 8, .cdev.name = "d12:green", },
214 { .mask = 1 << 9, .cdev.name = "d13:green", },
215 { .mask = 1 << 10, .cdev.name = "d14:green", },
216 { .mask = 1 << 11, .cdev.name = "d15:green", },
218 #ifndef CONFIG_LEDS
219 { .mask = 1 << 12, .cdev.name = "d16:green", },
220 { .mask = 1 << 13, .cdev.name = "d17:green", },
221 { .mask = 1 << 14, .cdev.name = "d18:green", },
222 { .mask = 1 << 15, .cdev.name = "d19:green", },
223 #endif
226 static void
227 fpga_led_set(struct led_classdev *cdev, enum led_brightness value)
229 struct dbg_led *led = container_of(cdev, struct dbg_led, cdev);
230 unsigned long flags;
232 spin_lock_irqsave(&lock, flags);
233 if (value == LED_OFF)
234 hw_led_state &= ~led->mask;
235 else
236 hw_led_state |= led->mask;
237 __raw_writew(~hw_led_state, &fpga->leds);
238 spin_unlock_irqrestore(&lock, flags);
241 static void __init newled_init(struct device *dev)
243 unsigned i;
244 struct dbg_led *led;
245 int status;
247 for (i = 0, led = dbg_leds; i < ARRAY_SIZE(dbg_leds); i++, led++) {
248 led->cdev.brightness_set = fpga_led_set;
249 status = led_classdev_register(dev, &led->cdev);
250 if (status < 0)
251 break;
253 return;
257 /*-------------------------------------------------------------------------*/
259 static int /* __init */ fpga_probe(struct platform_device *pdev)
261 struct resource *iomem;
263 spin_lock_init(&lock);
265 iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
266 if (!iomem)
267 return -ENODEV;
269 fpga = ioremap(iomem->start, H2P2_DBG_FPGA_SIZE);
270 __raw_writew(~0, &fpga->leds);
272 #ifdef CONFIG_LEDS
273 leds_event = h2p2_dbg_leds_event;
274 leds_event(led_start);
275 #endif
277 if (new_led_api()) {
278 newled_init(&pdev->dev);
281 return 0;
284 static int fpga_suspend_noirq(struct device *dev)
286 __raw_writew(~0, &fpga->leds);
287 return 0;
290 static int fpga_resume_noirq(struct device *dev)
292 __raw_writew(~hw_led_state, &fpga->leds);
293 return 0;
296 static const struct dev_pm_ops fpga_dev_pm_ops = {
297 .suspend_noirq = fpga_suspend_noirq,
298 .resume_noirq = fpga_resume_noirq,
301 static struct platform_driver led_driver = {
302 .driver.name = "omap_dbg_led",
303 .driver.pm = &fpga_dev_pm_ops,
304 .probe = fpga_probe,
307 static int __init fpga_init(void)
309 if (machine_is_omap_h4()
310 || machine_is_omap_h3()
311 || machine_is_omap_h2()
312 || machine_is_omap_perseus2()
314 return platform_driver_register(&led_driver);
315 return 0;
317 fs_initcall(fpga_init);