drivers/char/tipar.c

   1 /* Hey EMACS -*- linux-c -*-
   2  *
   3  * tipar - low level driver for handling a parallel link cable designed
   4  * for Texas Instruments graphing calculators (http://lpg.ticalc.org).
   5  * A part of the TiLP project.
   6  *
   7  * Copyright (C) 2000-2002, Romain Lievin <roms@lpg.ticalc.org>
   8  * under the terms of the GNU General Public License.
   9  *
  10  * Various fixes & clean-up from the Linux Kernel Mailing List
  11  * (Alan Cox, Richard B. Johnson, Christoph Hellwig).
  12  */
  13
  14 /* This driver should, in theory, work with any parallel port that has an
  15  * appropriate low-level driver; all I/O is done through the parport
  16  * abstraction layer.
  17  *
  18  * If this driver is built into the kernel, you can configure it using the
  19  * kernel command-line.  For example:
  20  *
  21  *      tipar=timeout,delay       (set timeout and delay)
  22  *
  23  * If the driver is loaded as a module, similar functionality is available
  24  * using module parameters.  The equivalent of the above commands would be:
  25  *
  26  *      # insmod tipar timeout=15 delay=10
  27  */
  28
  29 /* COMPATIBILITY WITH OLD KERNELS
  30  *
  31  * Usually, parallel cables were bound to ports at
  32  * particular I/O addresses, as follows:
  33  *
  34  *      tipar0             0x378
  35  *      tipar1             0x278
  36  *      tipar2             0x3bc
  37  *
  38  *
  39  * This driver, by default, binds tipar devices according to parport and
  40  * the minor number.
  41  *
  42  */
  43 #undef DEBUG                            /* change to #define to get debugging
  44                                          * output - for pr_debug() */
  45 #include <linux/config.h>
  46 #include <linux/module.h>
  47 #include <linux/types.h>
  48 #include <linux/errno.h>
  49 #include <linux/kernel.h>
  50 #include <linux/sched.h>
  51 #include <linux/delay.h>
  52 #include <linux/fcntl.h>
  53 #include <linux/fs.h>
  54 #include <linux/init.h>
  55 #include <asm/uaccess.h>
  56 #include <linux/ioport.h>
  57 #include <asm/io.h>
  58 #include <linux/bitops.h>
  59 #include <linux/devfs_fs_kernel.h>      /* DevFs support */
  60 #include <linux/parport.h>              /* Our code depend on parport */
  61 #include <linux/device.h>
  62
  63 /*
  64  * TI definitions
  65  */
  66 #include <linux/ticable.h>
  67
  68 /*
  69  * Version Information
  70  */
  71 #define DRIVER_VERSION "1.19"
  72 #define DRIVER_AUTHOR  "Romain Lievin <roms@lpg.ticalc.org>"
  73 #define DRIVER_DESC    "Device driver for TI/PC parallel link cables"
  74 #define DRIVER_LICENSE "GPL"
  75
  76 #define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq))
  77
  78 /* ----- global variables --------------------------------------------- */
  79
  80 struct tipar_struct {
  81         struct pardevice *dev;  /* Parport device entry */
  82 };
  83
  84 #define PP_NO 3
  85 static struct tipar_struct table[PP_NO];
  86
  87 static int delay = IO_DELAY;    /* inter-bit delay in microseconds */
  88 static int timeout = TIMAXTIME; /* timeout in tenth of seconds     */
  89
  90 static unsigned int tp_count;   /* tipar count */
  91 static unsigned long opened;    /* opened devices */
  92
  93 static struct class *tipar_class;
  94
  95 /* --- macros for parport access -------------------------------------- */
  96
  97 #define r_dtr(x)        (parport_read_data(table[(x)].dev->port))
  98 #define r_str(x)        (parport_read_status(table[(x)].dev->port))
  99 #define w_ctr(x,y)      (parport_write_control(table[(x)].dev->port, (y)))
 100 #define w_dtr(x,y)      (parport_write_data(table[(x)].dev->port, (y)))
 101
 102 /* --- setting states on the D-bus with the right timing: ------------- */
 103
 104 static inline void
 105 outbyte(int value, int minor)
 106 {
 107         w_dtr(minor, value);
 108 }
 109
 110 static inline int
 111 inbyte(int minor)
 112 {
 113         return (r_str(minor));
 114 }
 115
 116 static inline void
 117 init_ti_parallel(int minor)
 118 {
 119         outbyte(3, minor);
 120 }
 121
 122 /* ----- global defines ----------------------------------------------- */
 123
 124 #define START(x) { x = jiffies + (HZ * timeout) / 10; }
 125 #define WAIT(x)  { \
 126   if (time_before((x), jiffies)) return -1; \
 127   if (need_resched()) schedule(); }
 128
 129 /* ----- D-bus bit-banging functions ---------------------------------- */
 130
 131 /* D-bus protocol (45kbit/s max):
 132                     1                 0                      0
 133        _______        ______|______    __________|________    __________
 134 Red  :        ________      |      ____          |        ____
 135        _        ____________|________      ______|__________       _____
 136 White:  ________            |        ______      |          _______
 137 */
 138
 139 /* Try to transmit a byte on the specified port (-1 if error). */
 140 static int
 141 put_ti_parallel(int minor, unsigned char data)
 142 {
 143         unsigned int bit;
 144         unsigned long max;
 145
 146         for (bit = 0; bit < 8; bit++) {
 147                 if (data & 1) {
 148                         outbyte(2, minor);
 149                         START(max);
 150                         do {
 151                                 WAIT(max);
 152                         } while (inbyte(minor) & 0x10);
 153
 154                         outbyte(3, minor);
 155                         START(max);
 156                         do {
 157                                 WAIT(max);
 158                         } while (!(inbyte(minor) & 0x10));
 159                 } else {
 160                         outbyte(1, minor);
 161                         START(max);
 162                         do {
 163                                 WAIT(max);
 164                         } while (inbyte(minor) & 0x20);
 165
 166                         outbyte(3, minor);
 167                         START(max);
 168                         do {
 169                                 WAIT(max);
 170                         } while (!(inbyte(minor) & 0x20));
 171                 }
 172
 173                 data >>= 1;
 174                 udelay(delay);
 175
 176                 if (need_resched())
 177                         schedule();
 178         }
 179
 180         return 0;
 181 }
 182
 183 /* Receive a byte on the specified port or -1 if error. */
 184 static int
 185 get_ti_parallel(int minor)
 186 {
 187         unsigned int bit;
 188         unsigned char v, data = 0;
 189         unsigned long max;
 190
 191         for (bit = 0; bit < 8; bit++) {
 192                 START(max);
 193                 do {
 194                         WAIT(max);
 195                 } while ((v = inbyte(minor) & 0x30) == 0x30);
 196
 197                 if (v == 0x10) {
 198                         data = (data >> 1) | 0x80;
 199                         outbyte(1, minor);
 200                         START(max);
 201                         do {
 202                                 WAIT(max);
 203                         } while (!(inbyte(minor) & 0x20));
 204                         outbyte(3, minor);
 205                 } else {
 206                         data = data >> 1;
 207                         outbyte(2, minor);
 208                         START(max);
 209                         do {
 210                                 WAIT(max);
 211                         } while (!(inbyte(minor) & 0x10));
 212                         outbyte(3, minor);
 213                 }
 214
 215                 udelay(delay);
 216                 if (need_resched())
 217                         schedule();
 218         }
 219
 220         return (int) data;
 221 }
 222
 223 /* Try to detect a parallel link cable on the specified port */
 224 static int
 225 probe_ti_parallel(int minor)
 226 {
 227         int i;
 228         int seq[] = { 0x00, 0x20, 0x10, 0x30 };
 229
 230         for (i = 3; i >= 0; i--) {
 231                 outbyte(3, minor);
 232                 outbyte(i, minor);
 233                 udelay(delay);
 234                 pr_debug("tipar: Probing -> %i: 0x%02x 0x%02x\n", i,
 235                         data & 0x30, seq[i]);
 236                 if ((inbyte(minor) & 0x30) != seq[i]) {
 237                         outbyte(3, minor);
 238                         return -1;
 239                 }
 240         }
 241
 242         outbyte(3, minor);
 243         return 0;
 244 }
 245
 246 /* ----- kernel module functions--------------------------------------- */
 247
 248 static int
 249 tipar_open(struct inode *inode, struct file *file)
 250 {
 251         unsigned int minor = iminor(inode) - TIPAR_MINOR;
 252
 253         if (minor > tp_count - 1)
 254                 return -ENXIO;
 255
 256         if (test_and_set_bit(minor, &opened))
 257                 return -EBUSY;
 258
 259         parport_claim_or_block(table[minor].dev);
 260         init_ti_parallel(minor);
 261         parport_release(table[minor].dev);
 262
 263         return nonseekable_open(inode, file);
 264 }
 265
 266 static int
 267 tipar_close(struct inode *inode, struct file *file)
 268 {
 269         unsigned int minor = iminor(inode) - TIPAR_MINOR;
 270
 271         if (minor > tp_count - 1)
 272                 return -ENXIO;
 273
 274         clear_bit(minor, &opened);
 275
 276         return 0;
 277 }
 278
 279 static ssize_t
 280 tipar_write (struct file *file, const char __user *buf, size_t count,
 281                 loff_t * ppos)
 282 {
 283         unsigned int minor = iminor(file->f_dentry->d_inode) - TIPAR_MINOR;
 284         ssize_t n;
 285
 286         parport_claim_or_block(table[minor].dev);
 287
 288         for (n = 0; n < count; n++) {
 289                 unsigned char b;
 290
 291                 if (get_user(b, buf + n)) {
 292                         n = -EFAULT;
 293                         goto out;
 294                 }
 295
 296                 if (put_ti_parallel(minor, b) == -1) {
 297                         init_ti_parallel(minor);
 298                         n = -ETIMEDOUT;
 299                         goto out;
 300                 }
 301         }
 302       out:
 303         parport_release(table[minor].dev);
 304         return n;
 305 }
 306
 307 static ssize_t
 308 tipar_read(struct file *file, char __user *buf, size_t count, loff_t * ppos)
 309 {
 310         int b = 0;
 311         unsigned int minor = iminor(file->f_dentry->d_inode) - TIPAR_MINOR;
 312         ssize_t retval = 0;
 313         ssize_t n = 0;
 314
 315         if (count == 0)
 316                 return 0;
 317
 318         parport_claim_or_block(table[minor].dev);
 319
 320         while (n < count) {
 321                 b = get_ti_parallel(minor);
 322                 if (b == -1) {
 323                         init_ti_parallel(minor);
 324                         retval = -ETIMEDOUT;
 325                         goto out;
 326                 } else {
 327                         if (put_user(b, buf + n)) {
 328                                 retval = -EFAULT;
 329                                 break;
 330                         } else
 331                                 retval = ++n;
 332                 }
 333
 334                 /* Non-blocking mode : try again ! */
 335                 if (file->f_flags & O_NONBLOCK) {
 336                         retval = -EAGAIN;
 337                         goto out;
 338                 }
 339
 340                 /* Signal pending, try again ! */
 341                 if (signal_pending(current)) {
 342                         retval = -ERESTARTSYS;
 343                         goto out;
 344                 }
 345
 346                 if (need_resched())
 347                         schedule();
 348         }
 349
 350       out:
 351         parport_release(table[minor].dev);
 352         return retval;
 353 }
 354
 355 static int
 356 tipar_ioctl(struct inode *inode, struct file *file,
 357             unsigned int cmd, unsigned long arg)
 358 {
 359         int retval = 0;
 360
 361         switch (cmd) {
 362         case IOCTL_TIPAR_DELAY:
 363                 delay = (int)arg;    //get_user(delay, &arg);
 364                 break;
 365         case IOCTL_TIPAR_TIMEOUT:
 366                 if (arg != 0)
 367                         timeout = (int)arg;
 368                 else
 369                         retval = -EINVAL;
 370           break;
 371         default:
 372                 retval = -ENOTTY;
 373                 break;
 374         }
 375
 376         return retval;
 377 }
 378
 379 /* ----- kernel module registering ------------------------------------ */
 380
 381 static struct file_operations tipar_fops = {
 382         .owner = THIS_MODULE,
 383         .llseek = no_llseek,
 384         .read = tipar_read,
 385         .write = tipar_write,
 386         .ioctl = tipar_ioctl,
 387         .open = tipar_open,
 388         .release = tipar_close,
 389 };
 390
 391 /* --- initialisation code ------------------------------------- */
 392
 393 #ifndef MODULE
 394 /*      You must set these - there is no sane way to probe for this cable.
 395  *      You can use 'tipar=timeout,delay' to set these now. */
 396 static int __init
 397 tipar_setup(char *str)
 398 {
 399         int ints[3];
 400
 401         str = get_options(str, ARRAY_SIZE(ints), ints);
 402
 403         if (ints[0] > 0) {
 404                 if (ints[1] != 0)
 405                         timeout = ints[1];
 406                 else
 407                         printk(KERN_WARNING "tipar: bad timeout value (0), "
 408                                 "using default value instead");
 409                 if (ints[0] > 1) {
 410                         delay = ints[2];
 411                 }
 412         }
 413
 414         return 1;
 415 }
 416 #endif
 417
 418 /*
 419  * Register our module into parport.
 420  * Pass also 2 callbacks functions to parport: a pre-emptive function and an
 421  * interrupt handler function (unused).
 422  * Display a message such "tipar0: using parport0 (polling)".
 423  */
 424 static int
 425 tipar_register(int nr, struct parport *port)
 426 {
 427         int err = 0;
 428
 429         /* Register our module into parport */
 430         table[nr].dev = parport_register_device(port, "tipar",
 431                                                 NULL, NULL, NULL, 0,
 432                                                 (void *) &table[nr]);
 433
 434         if (table[nr].dev == NULL) {
 435                 err = 1;
 436                 goto out;
 437         }
 438
 439         class_device_create(tipar_class, NULL, MKDEV(TIPAR_MAJOR,
 440                         TIPAR_MINOR + nr), NULL, "par%d", nr);
 441         /* Use devfs, tree: /dev/ticables/par/[0..2] */
 442         err = devfs_mk_cdev(MKDEV(TIPAR_MAJOR, TIPAR_MINOR + nr),
 443                         S_IFCHR | S_IRUGO | S_IWUGO,
 444                         "ticables/par/%d", nr);
 445         if (err)
 446                 goto out_class;
 447
 448         /* Display informations */
 449         pr_info("tipar%d: using %s (%s)\n", nr, port->name, (port->irq ==
 450                 PARPORT_IRQ_NONE) ? "polling" : "interrupt-driven");
 451
 452         if (probe_ti_parallel(nr) != -1)
 453                 pr_info("tipar%d: link cable found\n", nr);
 454         else
 455                 pr_info("tipar%d: link cable not found\n", nr);
 456
 457         err = 0;
 458         goto out;
 459
 460 out_class:
 461         class_device_destroy(tipar_class, MKDEV(TIPAR_MAJOR, TIPAR_MINOR + nr));
 462         class_destroy(tipar_class);
 463 out:
 464         return err;
 465 }
 466
 467 static void
 468 tipar_attach(struct parport *port)
 469 {
 470         if (tp_count == PP_NO) {
 471                 pr_info("tipar: ignoring parallel port (max. %d)\n", PP_NO);
 472                 return;
 473         }
 474
 475         if (!tipar_register(tp_count, port))
 476                 tp_count++;
 477 }
 478
 479 static void
 480 tipar_detach(struct parport *port)
 481 {
 482         /* Nothing to do */
 483 }
 484
 485 static struct parport_driver tipar_driver = {
 486         .name = "tipar",
 487         .attach = tipar_attach,
 488         .detach = tipar_detach,
 489 };
 490
 491 static int __init
 492 tipar_init_module(void)
 493 {
 494         int err = 0;
 495
 496         pr_info("tipar: parallel link cable driver, version %s\n",
 497                 DRIVER_VERSION);
 498
 499         if (register_chrdev(TIPAR_MAJOR, "tipar", &tipar_fops)) {
 500                 printk(KERN_ERR "tipar: unable to get major %d\n", TIPAR_MAJOR);
 501                 err = -EIO;
 502                 goto out;
 503         }
 504
 505         /* Use devfs with tree: /dev/ticables/par/[0..2] */
 506         devfs_mk_dir("ticables/par");
 507
 508         tipar_class = class_create(THIS_MODULE, "ticables");
 509         if (IS_ERR(tipar_class)) {
 510                 err = PTR_ERR(tipar_class);
 511                 goto out_chrdev;
 512         }
 513         if (parport_register_driver(&tipar_driver)) {
 514                 printk(KERN_ERR "tipar: unable to register with parport\n");
 515                 err = -EIO;
 516                 goto out;
 517         }
 518
 519         err = 0;
 520         goto out;
 521
 522 out_chrdev:
 523         unregister_chrdev(TIPAR_MAJOR, "tipar");
 524 out:
 525         return err;
 526 }
 527
 528 static void __exit
 529 tipar_cleanup_module(void)
 530 {
 531         unsigned int i;
 532
 533         /* Unregistering module */
 534         parport_unregister_driver(&tipar_driver);
 535
 536         unregister_chrdev(TIPAR_MAJOR, "tipar");
 537
 538         for (i = 0; i < PP_NO; i++) {
 539                 if (table[i].dev == NULL)
 540                         continue;
 541                 parport_unregister_device(table[i].dev);
 542                 class_device_destroy(tipar_class, MKDEV(TIPAR_MAJOR, i));
 543                 devfs_remove("ticables/par/%d", i);
 544         }
 545         class_destroy(tipar_class);
 546         devfs_remove("ticables/par");
 547
 548         pr_info("tipar: module unloaded\n");
 549 }
 550
 551 /* --------------------------------------------------------------------- */
 552
 553 __setup("tipar=", tipar_setup);
 554 module_init(tipar_init_module);
 555 module_exit(tipar_cleanup_module);
 556
 557 MODULE_AUTHOR(DRIVER_AUTHOR);
 558 MODULE_DESCRIPTION(DRIVER_DESC);
 559 MODULE_LICENSE(DRIVER_LICENSE);
 560
 561 module_param(timeout, int, 0);
 562 MODULE_PARM_DESC(timeout, "Timeout (default=1.5 seconds)");
 563 module_param(delay, int, 0);
 564 MODULE_PARM_DESC(delay, "Inter-bit delay (default=10 microseconds)");