3 FlashPoint.c -- FlashPoint SCCB Manager for Linux
5 This file contains the FlashPoint SCCB Manager from BusLogic's FlashPoint
6 Driver Developer's Kit, with minor modifications by Leonard N. Zubkoff for
7 Linux compatibility. It was provided by BusLogic in the form of 16 separate
8 source files, which would have unnecessarily cluttered the scsi directory, so
9 the individual files have been combined into this single file.
11 Copyright 1995-1996 by Mylex Corporation. All Rights Reserved
13 This file is available under both the GNU General Public License
14 and a BSD-style copyright; see LICENSE.FlashPoint for details.
19 #ifdef CONFIG_SCSI_FLASHPOINT
24 #define CRCMASK 0xA001
26 #define FAILURE 0xFFFFFFFFL
29 typedef void (*CALL_BK_FN
) (struct sccb
*);
31 struct sccb_mgr_info
{
32 unsigned long si_baseaddr
;
33 unsigned char si_present
;
34 unsigned char si_intvect
;
37 unsigned short si_fw_revision
;
38 unsigned short si_per_targ_init_sync
;
39 unsigned short si_per_targ_fast_nego
;
40 unsigned short si_per_targ_ultra_nego
;
41 unsigned short si_per_targ_no_disc
;
42 unsigned short si_per_targ_wide_nego
;
43 unsigned short si_flags
;
44 unsigned char si_card_family
;
45 unsigned char si_bustype
;
46 unsigned char si_card_model
[3];
47 unsigned char si_relative_cardnum
;
48 unsigned char si_reserved
[4];
49 unsigned long si_OS_reserved
;
50 unsigned char si_XlatInfo
[4];
51 unsigned long si_reserved2
[5];
52 unsigned long si_secondary_range
;
55 #define SCSI_PARITY_ENA 0x0001
56 #define LOW_BYTE_TERM 0x0010
57 #define HIGH_BYTE_TERM 0x0020
58 #define BUSTYPE_PCI 0x3
60 #define SUPPORT_16TAR_32LUN 0x0002
61 #define SOFT_RESET 0x0004
62 #define EXTENDED_TRANSLATION 0x0008
63 #define POST_ALL_UNDERRRUNS 0x0040
64 #define FLAG_SCAM_ENABLED 0x0080
65 #define FLAG_SCAM_LEVEL2 0x0100
67 #define HARPOON_FAMILY 0x02
69 /* SCCB struct used for both SCCB and UCB manager compiles!
70 * The UCB Manager treats the SCCB as it's 'native hardware structure'
75 unsigned char OperationCode
;
76 unsigned char ControlByte
;
77 unsigned char CdbLength
;
78 unsigned char RequestSenseLength
;
79 unsigned long DataLength
;
80 unsigned long DataPointer
;
81 unsigned char CcbRes
[2];
82 unsigned char HostStatus
;
83 unsigned char TargetStatus
;
86 unsigned char Cdb
[12];
87 unsigned char CcbRes1
;
88 unsigned char Reserved1
;
89 unsigned long Reserved2
;
90 unsigned long SensePointer
;
92 CALL_BK_FN SccbCallback
; /* VOID (*SccbCallback)(); */
93 unsigned long SccbIOPort
; /* Identifies board base port */
94 unsigned char SccbStatus
;
95 unsigned char SCCBRes2
;
96 unsigned short SccbOSFlags
;
98 unsigned long Sccb_XferCnt
; /* actual transfer count */
99 unsigned long Sccb_ATC
;
100 unsigned long SccbVirtDataPtr
; /* virtual addr for OS/2 */
101 unsigned long Sccb_res1
;
102 unsigned short Sccb_MGRFlags
;
103 unsigned short Sccb_sgseg
;
104 unsigned char Sccb_scsimsg
; /* identify msg for selection */
105 unsigned char Sccb_tag
;
106 unsigned char Sccb_scsistat
;
107 unsigned char Sccb_idmsg
; /* image of last msg in */
108 struct sccb
*Sccb_forwardlink
;
109 struct sccb
*Sccb_backlink
;
110 unsigned long Sccb_savedATC
;
111 unsigned char Save_Cdb
[6];
112 unsigned char Save_CdbLen
;
113 unsigned char Sccb_XferState
;
114 unsigned long Sccb_SGoffset
;
119 #define SCATTER_GATHER_COMMAND 0x02
120 #define RESIDUAL_COMMAND 0x03
121 #define RESIDUAL_SG_COMMAND 0x04
122 #define RESET_COMMAND 0x81
124 #define F_USE_CMD_Q 0x20 /*Inidcates TAGGED command. */
125 #define TAG_TYPE_MASK 0xC0 /*Type of tag msg to send. */
126 #define SCCB_DATA_XFER_OUT 0x10 /* Write */
127 #define SCCB_DATA_XFER_IN 0x08 /* Read */
129 #define NO_AUTO_REQUEST_SENSE 0x01 /* No Request Sense Buffer */
131 #define BUS_FREE_ST 0
133 #define SELECT_BDR_ST 2 /* Select w\ Bus Device Reset */
134 #define SELECT_SN_ST 3 /* Select w\ Sync Nego */
135 #define SELECT_WN_ST 4 /* Select w\ Wide Data Nego */
136 #define SELECT_Q_ST 5 /* Select w\ Tagged Q'ing */
138 #define DATA_OUT_ST 7
140 #define DISCONNECT_ST 9
143 #define F_HOST_XFER_DIR 0x01
144 #define F_ALL_XFERRED 0x02
145 #define F_SG_XFER 0x04
146 #define F_AUTO_SENSE 0x08
147 #define F_ODD_BALL_CNT 0x10
148 #define F_NO_DATA_YET 0x80
150 #define F_STATUSLOADED 0x01
151 #define F_DEV_SELECTED 0x04
153 #define SCCB_COMPLETE 0x00 /* SCCB completed without error */
154 #define SCCB_DATA_UNDER_RUN 0x0C
155 #define SCCB_SELECTION_TIMEOUT 0x11 /* Set SCSI selection timed out */
156 #define SCCB_DATA_OVER_RUN 0x12
157 #define SCCB_PHASE_SEQUENCE_FAIL 0x14 /* Target bus phase sequence failure */
159 #define SCCB_GROSS_FW_ERR 0x27 /* Major problem! */
160 #define SCCB_BM_ERR 0x30 /* BusMaster error. */
161 #define SCCB_PARITY_ERR 0x34 /* SCSI parity error */
163 #define SCCB_IN_PROCESS 0x00
164 #define SCCB_SUCCESS 0x01
165 #define SCCB_ABORT 0x02
166 #define SCCB_ERROR 0x04
168 #define ORION_FW_REV 3110
170 #define QUEUE_DEPTH 254+1 /*1 for Normal disconnect 32 for Q'ing. */
172 #define MAX_MB_CARDS 4 /* Max. no of cards suppoerted on Mother Board */
174 #define MAX_SCSI_TAR 16
176 #define LUN_MASK 0x1f
178 #define SG_BUF_CNT 16 /*Number of prefetched elements. */
180 #define SG_ELEMENT_SIZE 8 /*Eight byte per element. */
182 #define RD_HARPOON(ioport) inb((u32)ioport)
183 #define RDW_HARPOON(ioport) inw((u32)ioport)
184 #define RD_HARP32(ioport,offset,data) (data = inl((u32)(ioport + offset)))
185 #define WR_HARPOON(ioport,val) outb((u8) val, (u32)ioport)
186 #define WRW_HARPOON(ioport,val) outw((u16)val, (u32)ioport)
187 #define WR_HARP32(ioport,offset,data) outl(data, (u32)(ioport + offset))
189 #define TAR_SYNC_MASK (BIT(7)+BIT(6))
190 #define SYNC_TRYING BIT(6)
191 #define SYNC_SUPPORTED (BIT(7)+BIT(6))
193 #define TAR_WIDE_MASK (BIT(5)+BIT(4))
194 #define WIDE_ENABLED BIT(4)
195 #define WIDE_NEGOCIATED BIT(5)
197 #define TAR_TAG_Q_MASK (BIT(3)+BIT(2))
198 #define TAG_Q_TRYING BIT(2)
199 #define TAG_Q_REJECT BIT(3)
201 #define TAR_ALLOW_DISC BIT(0)
203 #define EE_SYNC_MASK (BIT(0)+BIT(1))
204 #define EE_SYNC_5MB BIT(0)
205 #define EE_SYNC_10MB BIT(1)
206 #define EE_SYNC_20MB (BIT(0)+BIT(1))
208 #define EE_WIDE_SCSI BIT(7)
210 struct sccb_mgr_tar_info
{
212 struct sccb
*TarSelQ_Head
;
213 struct sccb
*TarSelQ_Tail
;
214 unsigned char TarLUN_CA
; /*Contingent Allgiance */
215 unsigned char TarTagQ_Cnt
;
216 unsigned char TarSelQ_Cnt
;
217 unsigned char TarStatus
;
218 unsigned char TarEEValue
;
219 unsigned char TarSyncCtrl
;
220 unsigned char TarReserved
[2]; /* for alignment */
221 unsigned char LunDiscQ_Idx
[MAX_LUN
];
222 unsigned char TarLUNBusy
[MAX_LUN
];
226 unsigned char niModel
; /* Model No. of card */
227 unsigned char niCardNo
; /* Card no. */
228 unsigned long niBaseAddr
; /* Port Address of card */
229 unsigned char niSysConf
; /* Adapter Configuration byte - Byte 16 of eeprom map */
230 unsigned char niScsiConf
; /* SCSI Configuration byte - Byte 17 of eeprom map */
231 unsigned char niScamConf
; /* SCAM Configuration byte - Byte 20 of eeprom map */
232 unsigned char niAdapId
; /* Host Adapter ID - Byte 24 of eerpom map */
233 unsigned char niSyncTbl
[MAX_SCSI_TAR
/ 2]; /* Sync/Wide byte of targets */
234 unsigned char niScamTbl
[MAX_SCSI_TAR
][4]; /* Compressed Scam name string of Targets */
243 struct sccb
*currentSCCB
;
244 struct sccb_mgr_info
*cardInfo
;
246 unsigned long ioPort
;
248 unsigned short cmdCounter
;
249 unsigned char discQCount
;
250 unsigned char tagQ_Lst
;
251 unsigned char cardIndex
;
252 unsigned char scanIndex
;
253 unsigned char globalFlags
;
255 struct nvram_info
*pNvRamInfo
;
256 struct sccb
*discQ_Tbl
[QUEUE_DEPTH
];
260 #define F_TAG_STARTED 0x01
261 #define F_CONLUN_IO 0x02
262 #define F_DO_RENEGO 0x04
263 #define F_NO_FILTER 0x08
264 #define F_GREEN_PC 0x10
265 #define F_HOST_XFER_ACT 0x20
266 #define F_NEW_SCCB_CMD 0x40
267 #define F_UPDATE_EEPROM 0x80
269 #define ID_STRING_LENGTH 32
270 #define TYPE_CODE0 0x63 /*Level2 Mstr (bits 7-6), */
272 #define SLV_TYPE_CODE0 0xA3 /*Priority Bit set (bits 7-6), */
274 #define ASSIGN_ID 0x00
275 #define SET_P_FLAG 0x01
276 #define CFG_CMPLT 0x03
277 #define DOM_MSTR 0x0F
278 #define SYNC_PTRN 0x1F
282 #define MISC_CODE 0x14
283 #define CLR_P_FLAG 0x18
285 #define INIT_SELTD 0x01
286 #define LEVEL2_TAR 0x02
288 enum scam_id_st
{ ID0
, ID1
, ID2
, ID3
, ID4
, ID5
, ID6
, ID7
, ID8
, ID9
, ID10
, ID11
,
290 ID13
, ID14
, ID15
, ID_UNUSED
, ID_UNASSIGNED
, ID_ASSIGNED
, LEGACY
,
291 CLR_PRIORITY
, NO_ID_AVAIL
294 typedef struct SCCBscam_info
{
296 unsigned char id_string
[ID_STRING_LENGTH
];
297 enum scam_id_st state
;
301 #define SCSI_REQUEST_SENSE 0x03
302 #define SCSI_READ 0x08
303 #define SCSI_WRITE 0x0A
304 #define SCSI_START_STOP_UNIT 0x1B
305 #define SCSI_READ_EXTENDED 0x28
306 #define SCSI_WRITE_EXTENDED 0x2A
307 #define SCSI_WRITE_AND_VERIFY 0x2E
311 #define SSQ_FULL 0x28
313 #define SMCMD_COMP 0x00
315 #define SMSAVE_DATA_PTR 0x02
316 #define SMREST_DATA_PTR 0x03
319 #define SMREJECT 0x07
321 #define SMPARITY 0x09
322 #define SMDEV_RESET 0x0C
323 #define SMABORT_TAG 0x0D
324 #define SMINIT_RECOVERY 0x0F
325 #define SMREL_RECOVERY 0x10
328 #define DISC_PRIV 0x40
334 #define SMIGNORWR 0x23 /* Ignore Wide Residue */
336 #define SIX_BYTE_CMD 0x06
337 #define TWELVE_BYTE_CMD 0x0C
340 #define MAX_OFFSET 0x0F /* Maxbyteoffset for Sync Xfers */
342 #define EEPROM_WD_CNT 256
344 #define EEPROM_CHECK_SUM 0
345 #define FW_SIGNATURE 2
346 #define MODEL_NUMB_0 4
347 #define MODEL_NUMB_2 6
348 #define MODEL_NUMB_4 8
349 #define SYSTEM_CONFIG 16
350 #define SCSI_CONFIG 17
351 #define BIOS_CONFIG 18
352 #define SCAM_CONFIG 20
353 #define ADAPTER_SCSI_ID 24
355 #define IGNORE_B_SCAN 32
356 #define SEND_START_ENA 34
357 #define DEVICE_ENABLE 36
359 #define SYNC_RATE_TBL 38
360 #define SYNC_RATE_TBL01 38
361 #define SYNC_RATE_TBL23 40
362 #define SYNC_RATE_TBL45 42
363 #define SYNC_RATE_TBL67 44
364 #define SYNC_RATE_TBL89 46
365 #define SYNC_RATE_TBLab 48
366 #define SYNC_RATE_TBLcd 50
367 #define SYNC_RATE_TBLef 52
369 #define EE_SCAMBASE 256
371 #define SCAM_ENABLED BIT(2)
372 #define SCAM_LEVEL2 BIT(3)
374 #define RENEGO_ENA BIT(10)
375 #define CONNIO_ENA BIT(11)
376 #define GREEN_PC_ENA BIT(12)
378 #define AUTO_RATE_00 00
379 #define AUTO_RATE_05 01
380 #define AUTO_RATE_10 02
381 #define AUTO_RATE_20 03
383 #define WIDE_NEGO_BIT BIT(7)
384 #define DISC_ENABLE_BIT BIT(6)
386 #define hp_vendor_id_0 0x00 /* LSB */
387 #define ORION_VEND_0 0x4B
389 #define hp_vendor_id_1 0x01 /* MSB */
390 #define ORION_VEND_1 0x10
392 #define hp_device_id_0 0x02 /* LSB */
393 #define ORION_DEV_0 0x30
395 #define hp_device_id_1 0x03 /* MSB */
396 #define ORION_DEV_1 0x81
398 /* Sub Vendor ID and Sub Device ID only available in
399 Harpoon Version 2 and higher */
401 #define hp_sub_device_id_0 0x06 /* LSB */
403 #define hp_semaphore 0x0C
404 #define SCCB_MGR_ACTIVE BIT(0)
405 #define TICKLE_ME BIT(1)
406 #define SCCB_MGR_PRESENT BIT(3)
407 #define BIOS_IN_USE BIT(4)
409 #define hp_sys_ctrl 0x0F
411 #define STOP_CLK BIT(0) /*Turn off BusMaster Clock */
412 #define DRVR_RST BIT(1) /*Firmware Reset to 80C15 chip */
413 #define HALT_MACH BIT(3) /*Halt State Machine */
414 #define HARD_ABORT BIT(4) /*Hard Abort */
416 #define hp_host_blk_cnt 0x13
418 #define XFER_BLK64 0x06 /* 1 1 0 64 byte per block */
420 #define BM_THRESHOLD 0x40 /* PCI mode can only xfer 16 bytes */
422 #define hp_int_mask 0x17
424 #define INT_CMD_COMPL BIT(0) /* DMA command complete */
425 #define INT_EXT_STATUS BIT(1) /* Extended Status Set */
427 #define hp_xfer_cnt_lo 0x18
428 #define hp_xfer_cnt_hi 0x1A
429 #define hp_xfer_cmd 0x1B
431 #define XFER_HOST_DMA 0x00 /* 0 0 0 Transfer Host -> DMA */
432 #define XFER_DMA_HOST 0x01 /* 0 0 1 Transfer DMA -> Host */
434 #define XFER_HOST_AUTO 0x00 /* 0 0 Auto Transfer Size */
436 #define XFER_DMA_8BIT 0x20 /* 0 1 8 BIT Transfer Size */
438 #define DISABLE_INT BIT(7) /*Do not interrupt at end of cmd. */
440 #define HOST_WRT_CMD ((DISABLE_INT + XFER_HOST_DMA + XFER_HOST_AUTO + XFER_DMA_8BIT))
441 #define HOST_RD_CMD ((DISABLE_INT + XFER_DMA_HOST + XFER_HOST_AUTO + XFER_DMA_8BIT))
443 #define hp_host_addr_lo 0x1C
444 #define hp_host_addr_hmi 0x1E
446 #define hp_ee_ctrl 0x22
448 #define EXT_ARB_ACK BIT(7)
449 #define SCSI_TERM_ENA_H BIT(6) /* SCSI high byte terminator */
450 #define SEE_MS BIT(5)
451 #define SEE_CS BIT(3)
452 #define SEE_CLK BIT(2)
453 #define SEE_DO BIT(1)
454 #define SEE_DI BIT(0)
457 #define EE_WRITE 0x05
459 #define EWEN_ADDR 0x03C0
461 #define EWDS_ADDR 0x0000
463 #define hp_bm_ctrl 0x26
465 #define SCSI_TERM_ENA_L BIT(0) /*Enable/Disable external terminators */
466 #define FLUSH_XFER_CNTR BIT(1) /*Flush transfer counter */
467 #define FORCE1_XFER BIT(5) /*Always xfer one byte in byte mode */
468 #define FAST_SINGLE BIT(6) /*?? */
470 #define BMCTRL_DEFAULT (FORCE1_XFER|FAST_SINGLE|SCSI_TERM_ENA_L)
472 #define hp_sg_addr 0x28
473 #define hp_page_ctrl 0x29
475 #define SCATTER_EN BIT(0)
476 #define SGRAM_ARAM BIT(1)
477 #define G_INT_DISABLE BIT(3) /* Enable/Disable all Interrupts */
478 #define NARROW_SCSI_CARD BIT(4) /* NARROW/WIDE SCSI config pin */
480 #define hp_pci_stat_cfg 0x2D
482 #define REC_MASTER_ABORT BIT(5) /*received Master abort */
484 #define hp_rev_num 0x33
486 #define hp_stack_data 0x34
487 #define hp_stack_addr 0x35
489 #define hp_ext_status 0x36
491 #define BM_FORCE_OFF BIT(0) /*Bus Master is forced to get off */
492 #define PCI_TGT_ABORT BIT(0) /*PCI bus master transaction aborted */
493 #define PCI_DEV_TMOUT BIT(1) /*PCI Device Time out */
494 #define CMD_ABORTED BIT(4) /*Command aborted */
495 #define BM_PARITY_ERR BIT(5) /*parity error on data received */
496 #define PIO_OVERRUN BIT(6) /*Slave data overrun */
497 #define BM_CMD_BUSY BIT(7) /*Bus master transfer command busy */
498 #define BAD_EXT_STATUS (BM_FORCE_OFF | PCI_DEV_TMOUT | CMD_ABORTED | \
499 BM_PARITY_ERR | PIO_OVERRUN)
501 #define hp_int_status 0x37
503 #define EXT_STATUS_ON BIT(1) /*Extended status is valid */
504 #define SCSI_INTERRUPT BIT(2) /*Global indication of a SCSI int. */
505 #define INT_ASSERTED BIT(5) /* */
507 #define hp_fifo_cnt 0x38
509 #define hp_intena 0x40
512 #define PROG_HLT BIT(6)
513 #define PARITY BIT(5)
516 #define SCAM_SEL BIT(2)
518 #define TIMEOUT BIT(0)
519 #define BUS_FREE BIT(15)
520 #define XFER_CNT_0 BIT(14)
521 #define PHASE BIT(13)
522 #define IUNKWN BIT(12)
523 #define ICMD_COMP BIT(11)
524 #define ITICKLE BIT(10)
525 #define IDO_STRT BIT(9)
526 #define ITAR_DISC BIT(8)
527 #define AUTO_INT (BIT(12)+BIT(11)+BIT(10)+BIT(9)+BIT(8))
528 #define CLR_ALL_INT 0xFFFF
529 #define CLR_ALL_INT_1 0xFF00
531 #define hp_intstat 0x42
533 #define hp_scsisig 0x44
535 #define SCSI_SEL BIT(7)
536 #define SCSI_BSY BIT(6)
537 #define SCSI_REQ BIT(5)
538 #define SCSI_ACK BIT(4)
539 #define SCSI_ATN BIT(3)
540 #define SCSI_CD BIT(2)
541 #define SCSI_MSG BIT(1)
542 #define SCSI_IOBIT BIT(0)
544 #define S_SCSI_PHZ (BIT(2)+BIT(1)+BIT(0))
545 #define S_MSGO_PH (BIT(2)+BIT(1) )
546 #define S_MSGI_PH (BIT(2)+BIT(1)+BIT(0))
547 #define S_DATAI_PH ( BIT(0))
548 #define S_DATAO_PH 0x00
549 #define S_ILL_PH ( BIT(1) )
551 #define hp_scsictrl_0 0x45
553 #define SEL_TAR BIT(6)
554 #define ENA_ATN BIT(4)
555 #define ENA_RESEL BIT(2)
556 #define SCSI_RST BIT(1)
557 #define ENA_SCAM_SEL BIT(0)
559 #define hp_portctrl_0 0x46
561 #define SCSI_PORT BIT(7)
562 #define SCSI_INBIT BIT(6)
563 #define DMA_PORT BIT(5)
564 #define DMA_RD BIT(4)
565 #define HOST_PORT BIT(3)
566 #define HOST_WRT BIT(2)
567 #define SCSI_BUS_EN BIT(1)
568 #define START_TO BIT(0)
570 #define hp_scsireset 0x47
572 #define SCSI_INI BIT(6)
573 #define SCAM_EN BIT(5)
574 #define DMA_RESET BIT(3)
575 #define HPSCSI_RESET BIT(2)
576 #define PROG_RESET BIT(1)
577 #define FIFO_CLR BIT(0)
579 #define hp_xfercnt_0 0x48
580 #define hp_xfercnt_2 0x4A
582 #define hp_fifodata_0 0x4C
583 #define hp_addstat 0x4E
585 #define SCAM_TIMER BIT(7)
586 #define SCSI_MODE8 BIT(3)
587 #define SCSI_PAR_ERR BIT(0)
589 #define hp_prgmcnt_0 0x4F
591 #define hp_selfid_0 0x50
592 #define hp_selfid_1 0x51
593 #define hp_arb_id 0x52
595 #define hp_select_id 0x53
597 #define hp_synctarg_base 0x54
598 #define hp_synctarg_12 0x54
599 #define hp_synctarg_13 0x55
600 #define hp_synctarg_14 0x56
601 #define hp_synctarg_15 0x57
603 #define hp_synctarg_8 0x58
604 #define hp_synctarg_9 0x59
605 #define hp_synctarg_10 0x5A
606 #define hp_synctarg_11 0x5B
608 #define hp_synctarg_4 0x5C
609 #define hp_synctarg_5 0x5D
610 #define hp_synctarg_6 0x5E
611 #define hp_synctarg_7 0x5F
613 #define hp_synctarg_0 0x60
614 #define hp_synctarg_1 0x61
615 #define hp_synctarg_2 0x62
616 #define hp_synctarg_3 0x63
618 #define NARROW_SCSI BIT(4)
619 #define DEFAULT_OFFSET 0x0F
621 #define hp_autostart_0 0x64
622 #define hp_autostart_1 0x65
623 #define hp_autostart_3 0x67
625 #define AUTO_IMMED BIT(5)
626 #define SELECT BIT(6)
627 #define END_DATA (BIT(7)+BIT(6))
629 #define hp_gp_reg_0 0x68
630 #define hp_gp_reg_1 0x69
631 #define hp_gp_reg_3 0x6B
633 #define hp_seltimeout 0x6C
635 #define TO_4ms 0x67 /* 3.9959ms */
637 #define TO_5ms 0x03 /* 4.9152ms */
638 #define TO_10ms 0x07 /* 11.xxxms */
639 #define TO_250ms 0x99 /* 250.68ms */
640 #define TO_290ms 0xB1 /* 289.99ms */
642 #define hp_clkctrl_0 0x6D
644 #define PWR_DWN BIT(6)
645 #define ACTdeassert BIT(4)
646 #define CLK_40MHZ (BIT(1) + BIT(0))
648 #define CLKCTRL_DEFAULT (ACTdeassert | CLK_40MHZ)
650 #define hp_fiforead 0x6E
651 #define hp_fifowrite 0x6F
653 #define hp_offsetctr 0x70
654 #define hp_xferstat 0x71
656 #define FIFO_EMPTY BIT(6)
658 #define hp_portctrl_1 0x72
660 #define CHK_SCSI_P BIT(3)
661 #define HOST_MODE8 BIT(0)
663 #define hp_xfer_pad 0x73
665 #define ID_UNLOCK BIT(3)
667 #define hp_scsidata_0 0x74
668 #define hp_scsidata_1 0x75
670 #define hp_aramBase 0x80
671 #define BIOS_DATA_OFFSET 0x60
672 #define BIOS_RELATIVE_CARD 0x64
674 #define AR3 (BIT(9) + BIT(8))
675 #define SDATA BIT(10)
677 #define CRD_OP BIT(11) /* Cmp Reg. w/ Data */
679 #define CRR_OP BIT(12) /* Cmp Reg. w. Reg. */
681 #define CPE_OP (BIT(14)+BIT(11)) /* Cmp SCSI phs & Branch EQ */
683 #define CPN_OP (BIT(14)+BIT(12)) /* Cmp SCSI phs & Branch NOT EQ */
685 #define ADATA_OUT 0x00
686 #define ADATA_IN BIT(8)
687 #define ACOMMAND BIT(10)
688 #define ASTATUS (BIT(10)+BIT(8))
689 #define AMSG_OUT (BIT(10)+BIT(9))
690 #define AMSG_IN (BIT(10)+BIT(9)+BIT(8))
692 #define BRH_OP BIT(13) /* Branch */
696 #define NOT_EQ BIT(9)
698 #define TCB_OP (BIT(13)+BIT(11)) /* Test condition & branch */
700 #define FIFO_0 BIT(10)
702 #define MPM_OP BIT(15) /* Match phase and move data */
704 #define MRR_OP BIT(14) /* Move DReg. to Reg. */
706 #define S_IDREG (BIT(2)+BIT(1)+BIT(0))
710 #define D_BUCKET (BIT(2) + BIT(1) + BIT(0))
712 #define RAT_OP (BIT(14)+BIT(13)+BIT(11))
714 #define SSI_OP (BIT(15)+BIT(11))
716 #define SSI_ITAR_DISC (ITAR_DISC >> 8)
717 #define SSI_IDO_STRT (IDO_STRT >> 8)
719 #define SSI_ICMD_COMP (ICMD_COMP >> 8)
720 #define SSI_ITICKLE (ITICKLE >> 8)
722 #define SSI_IUNKWN (IUNKWN >> 8)
723 #define SSI_INO_CC (IUNKWN >> 8)
724 #define SSI_IRFAIL (IUNKWN >> 8)
726 #define NP 0x10 /*Next Phase */
727 #define NTCMD 0x02 /*Non- Tagged Command start */
728 #define CMDPZ 0x04 /*Command phase */
729 #define DINT 0x12 /*Data Out/In interrupt */
730 #define DI 0x13 /*Data Out */
731 #define DC 0x19 /*Disconnect Message */
732 #define ST 0x1D /*Status Phase */
733 #define UNKNWN 0x24 /*Unknown bus action */
734 #define CC 0x25 /*Command Completion failure */
735 #define TICK 0x26 /*New target reselected us. */
736 #define SELCHK 0x28 /*Select & Check SCSI ID latch reg */
738 #define ID_MSG_STRT hp_aramBase + 0x00
739 #define NON_TAG_ID_MSG hp_aramBase + 0x06
740 #define CMD_STRT hp_aramBase + 0x08
741 #define SYNC_MSGS hp_aramBase + 0x08
743 #define TAG_STRT 0x00
744 #define DISCONNECT_START 0x10/2
745 #define END_DATA_START 0x14/2
746 #define CMD_ONLY_STRT CMDPZ/2
747 #define SELCHK_STRT SELCHK/2
749 #define GET_XFER_CNT(port, xfercnt) {RD_HARP32(port,hp_xfercnt_0,xfercnt); xfercnt &= 0xFFFFFF;}
750 /* #define GET_XFER_CNT(port, xfercnt) (xfercnt = RD_HARPOON(port+hp_xfercnt_2), \
752 xfercnt |= RDW_HARPOON((unsigned short)(port+hp_xfercnt_0)))
754 #define HP_SETUP_ADDR_CNT(port,addr,count) (WRW_HARPOON((port+hp_host_addr_lo), (unsigned short)(addr & 0x0000FFFFL)),\
756 WRW_HARPOON((port+hp_host_addr_hmi), (unsigned short)(addr & 0x0000FFFFL)),\
757 WR_HARP32(port,hp_xfercnt_0,count),\
758 WRW_HARPOON((port+hp_xfer_cnt_lo), (unsigned short)(count & 0x0000FFFFL)),\
760 WR_HARPOON(port+hp_xfer_cnt_hi, (count & 0xFF)))
762 #define ACCEPT_MSG(port) {while(RD_HARPOON(port+hp_scsisig) & SCSI_REQ){}\
763 WR_HARPOON(port+hp_scsisig, S_ILL_PH);}
765 #define ACCEPT_MSG_ATN(port) {while(RD_HARPOON(port+hp_scsisig) & SCSI_REQ){}\
766 WR_HARPOON(port+hp_scsisig, (S_ILL_PH|SCSI_ATN));}
768 #define DISABLE_AUTO(port) (WR_HARPOON(port+hp_scsireset, PROG_RESET),\
769 WR_HARPOON(port+hp_scsireset, 0x00))
771 #define ARAM_ACCESS(p_port) (WR_HARPOON(p_port+hp_page_ctrl, \
772 (RD_HARPOON(p_port+hp_page_ctrl) | SGRAM_ARAM)))
774 #define SGRAM_ACCESS(p_port) (WR_HARPOON(p_port+hp_page_ctrl, \
775 (RD_HARPOON(p_port+hp_page_ctrl) & ~SGRAM_ARAM)))
777 #define MDISABLE_INT(p_port) (WR_HARPOON(p_port+hp_page_ctrl, \
778 (RD_HARPOON(p_port+hp_page_ctrl) | G_INT_DISABLE)))
780 #define MENABLE_INT(p_port) (WR_HARPOON(p_port+hp_page_ctrl, \
781 (RD_HARPOON(p_port+hp_page_ctrl) & ~G_INT_DISABLE)))
783 static unsigned char FPT_sisyncn(unsigned long port
, unsigned char p_card
,
784 unsigned char syncFlag
);
785 static void FPT_ssel(unsigned long port
, unsigned char p_card
);
786 static void FPT_sres(unsigned long port
, unsigned char p_card
,
787 struct sccb_card
*pCurrCard
);
788 static void FPT_shandem(unsigned long port
, unsigned char p_card
,
789 struct sccb
*pCurrSCCB
);
790 static void FPT_stsyncn(unsigned long port
, unsigned char p_card
);
791 static void FPT_sisyncr(unsigned long port
, unsigned char sync_pulse
,
792 unsigned char offset
);
793 static void FPT_sssyncv(unsigned long p_port
, unsigned char p_id
,
794 unsigned char p_sync_value
,
795 struct sccb_mgr_tar_info
*currTar_Info
);
796 static void FPT_sresb(unsigned long port
, unsigned char p_card
);
797 static void FPT_sxfrp(unsigned long p_port
, unsigned char p_card
);
798 static void FPT_schkdd(unsigned long port
, unsigned char p_card
);
799 static unsigned char FPT_RdStack(unsigned long port
, unsigned char index
);
800 static void FPT_WrStack(unsigned long portBase
, unsigned char index
,
802 static unsigned char FPT_ChkIfChipInitialized(unsigned long ioPort
);
804 static void FPT_SendMsg(unsigned long port
, unsigned char message
);
805 static void FPT_queueFlushTargSccb(unsigned char p_card
, unsigned char thisTarg
,
806 unsigned char error_code
);
808 static void FPT_sinits(struct sccb
*p_sccb
, unsigned char p_card
);
809 static void FPT_RNVRamData(struct nvram_info
*pNvRamInfo
);
811 static unsigned char FPT_siwidn(unsigned long port
, unsigned char p_card
);
812 static void FPT_stwidn(unsigned long port
, unsigned char p_card
);
813 static void FPT_siwidr(unsigned long port
, unsigned char width
);
815 static void FPT_queueSelectFail(struct sccb_card
*pCurrCard
,
816 unsigned char p_card
);
817 static void FPT_queueDisconnect(struct sccb
*p_SCCB
, unsigned char p_card
);
818 static void FPT_queueCmdComplete(struct sccb_card
*pCurrCard
,
819 struct sccb
*p_SCCB
, unsigned char p_card
);
820 static void FPT_queueSearchSelect(struct sccb_card
*pCurrCard
,
821 unsigned char p_card
);
822 static void FPT_queueFlushSccb(unsigned char p_card
, unsigned char error_code
);
823 static void FPT_queueAddSccb(struct sccb
*p_SCCB
, unsigned char card
);
824 static unsigned char FPT_queueFindSccb(struct sccb
*p_SCCB
,
825 unsigned char p_card
);
826 static void FPT_utilUpdateResidual(struct sccb
*p_SCCB
);
827 static unsigned short FPT_CalcCrc16(unsigned char buffer
[]);
828 static unsigned char FPT_CalcLrc(unsigned char buffer
[]);
830 static void FPT_Wait1Second(unsigned long p_port
);
831 static void FPT_Wait(unsigned long p_port
, unsigned char p_delay
);
832 static void FPT_utilEEWriteOnOff(unsigned long p_port
, unsigned char p_mode
);
833 static void FPT_utilEEWrite(unsigned long p_port
, unsigned short ee_data
,
834 unsigned short ee_addr
);
835 static unsigned short FPT_utilEERead(unsigned long p_port
,
836 unsigned short ee_addr
);
837 static unsigned short FPT_utilEEReadOrg(unsigned long p_port
,
838 unsigned short ee_addr
);
839 static void FPT_utilEESendCmdAddr(unsigned long p_port
, unsigned char ee_cmd
,
840 unsigned short ee_addr
);
842 static void FPT_phaseDataOut(unsigned long port
, unsigned char p_card
);
843 static void FPT_phaseDataIn(unsigned long port
, unsigned char p_card
);
844 static void FPT_phaseCommand(unsigned long port
, unsigned char p_card
);
845 static void FPT_phaseStatus(unsigned long port
, unsigned char p_card
);
846 static void FPT_phaseMsgOut(unsigned long port
, unsigned char p_card
);
847 static void FPT_phaseMsgIn(unsigned long port
, unsigned char p_card
);
848 static void FPT_phaseIllegal(unsigned long port
, unsigned char p_card
);
850 static void FPT_phaseDecode(unsigned long port
, unsigned char p_card
);
851 static void FPT_phaseChkFifo(unsigned long port
, unsigned char p_card
);
852 static void FPT_phaseBusFree(unsigned long p_port
, unsigned char p_card
);
854 static void FPT_XbowInit(unsigned long port
, unsigned char scamFlg
);
855 static void FPT_BusMasterInit(unsigned long p_port
);
856 static void FPT_DiagEEPROM(unsigned long p_port
);
858 static void FPT_dataXferProcessor(unsigned long port
,
859 struct sccb_card
*pCurrCard
);
860 static void FPT_busMstrSGDataXferStart(unsigned long port
,
861 struct sccb
*pCurrSCCB
);
862 static void FPT_busMstrDataXferStart(unsigned long port
,
863 struct sccb
*pCurrSCCB
);
864 static void FPT_hostDataXferAbort(unsigned long port
, unsigned char p_card
,
865 struct sccb
*pCurrSCCB
);
866 static void FPT_hostDataXferRestart(struct sccb
*currSCCB
);
868 static unsigned char FPT_SccbMgr_bad_isr(unsigned long p_port
,
869 unsigned char p_card
,
870 struct sccb_card
*pCurrCard
,
871 unsigned short p_int
);
873 static void FPT_SccbMgrTableInitAll(void);
874 static void FPT_SccbMgrTableInitCard(struct sccb_card
*pCurrCard
,
875 unsigned char p_card
);
876 static void FPT_SccbMgrTableInitTarget(unsigned char p_card
,
877 unsigned char target
);
879 static void FPT_scini(unsigned char p_card
, unsigned char p_our_id
,
880 unsigned char p_power_up
);
882 static int FPT_scarb(unsigned long p_port
, unsigned char p_sel_type
);
883 static void FPT_scbusf(unsigned long p_port
);
884 static void FPT_scsel(unsigned long p_port
);
885 static void FPT_scasid(unsigned char p_card
, unsigned long p_port
);
886 static unsigned char FPT_scxferc(unsigned long p_port
, unsigned char p_data
);
887 static unsigned char FPT_scsendi(unsigned long p_port
,
888 unsigned char p_id_string
[]);
889 static unsigned char FPT_sciso(unsigned long p_port
,
890 unsigned char p_id_string
[]);
891 static void FPT_scwirod(unsigned long p_port
, unsigned char p_data_bit
);
892 static void FPT_scwiros(unsigned long p_port
, unsigned char p_data_bit
);
893 static unsigned char FPT_scvalq(unsigned char p_quintet
);
894 static unsigned char FPT_scsell(unsigned long p_port
, unsigned char targ_id
);
895 static void FPT_scwtsel(unsigned long p_port
);
896 static void FPT_inisci(unsigned char p_card
, unsigned long p_port
,
897 unsigned char p_our_id
);
898 static void FPT_scsavdi(unsigned char p_card
, unsigned long p_port
);
899 static unsigned char FPT_scmachid(unsigned char p_card
,
900 unsigned char p_id_string
[]);
902 static void FPT_autoCmdCmplt(unsigned long p_port
, unsigned char p_card
);
903 static void FPT_autoLoadDefaultMap(unsigned long p_port
);
905 static struct sccb_mgr_tar_info FPT_sccbMgrTbl
[MAX_CARDS
][MAX_SCSI_TAR
] =
907 static struct sccb_card FPT_BL_Card
[MAX_CARDS
] = { {0} };
908 static SCCBSCAM_INFO FPT_scamInfo
[MAX_SCSI_TAR
] = { {{0}} };
909 static struct nvram_info FPT_nvRamInfo
[MAX_MB_CARDS
] = { {0} };
911 static unsigned char FPT_mbCards
= 0;
912 static unsigned char FPT_scamHAString
[] =
913 { 0x63, 0x07, 'B', 'U', 'S', 'L', 'O', 'G', 'I', 'C',
914 ' ', 'B', 'T', '-', '9', '3', '0',
915 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
916 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20
919 static unsigned short FPT_default_intena
= 0;
921 static void (*FPT_s_PhaseTbl
[8]) (unsigned long, unsigned char) = {
924 /*---------------------------------------------------------------------
926 * Function: FlashPoint_ProbeHostAdapter
928 * Description: Setup and/or Search for cards and return info to caller.
930 *---------------------------------------------------------------------*/
932 static int FlashPoint_ProbeHostAdapter(struct sccb_mgr_info
*pCardInfo
)
934 static unsigned char first_time
= 1;
936 unsigned char i
, j
, id
, ScamFlg
;
937 unsigned short temp
, temp2
, temp3
, temp4
, temp5
, temp6
;
938 unsigned long ioport
;
939 struct nvram_info
*pCurrNvRam
;
941 ioport
= pCardInfo
->si_baseaddr
;
943 if (RD_HARPOON(ioport
+ hp_vendor_id_0
) != ORION_VEND_0
)
946 if ((RD_HARPOON(ioport
+ hp_vendor_id_1
) != ORION_VEND_1
))
949 if ((RD_HARPOON(ioport
+ hp_device_id_0
) != ORION_DEV_0
))
952 if ((RD_HARPOON(ioport
+ hp_device_id_1
) != ORION_DEV_1
))
955 if (RD_HARPOON(ioport
+ hp_rev_num
) != 0x0f) {
957 /* For new Harpoon then check for sub_device ID LSB
958 the bits(0-3) must be all ZERO for compatible with
959 current version of SCCBMgr, else skip this Harpoon
962 if (RD_HARPOON(ioport
+ hp_sub_device_id_0
) & 0x0f)
967 FPT_SccbMgrTableInitAll();
972 if (FPT_RdStack(ioport
, 0) != 0x00) {
973 if (FPT_ChkIfChipInitialized(ioport
) == 0) {
975 WR_HARPOON(ioport
+ hp_semaphore
, 0x00);
976 FPT_XbowInit(ioport
, 0); /*Must Init the SCSI before attempting */
977 FPT_DiagEEPROM(ioport
);
979 if (FPT_mbCards
< MAX_MB_CARDS
) {
980 pCurrNvRam
= &FPT_nvRamInfo
[FPT_mbCards
];
982 pCurrNvRam
->niBaseAddr
= ioport
;
983 FPT_RNVRamData(pCurrNvRam
);
990 WR_HARPOON(ioport
+ hp_clkctrl_0
, CLKCTRL_DEFAULT
);
991 WR_HARPOON(ioport
+ hp_sys_ctrl
, 0x00);
994 pCardInfo
->si_id
= pCurrNvRam
->niAdapId
;
998 char)(FPT_utilEERead(ioport
,
1000 2)) & (unsigned char)0x0FF);
1002 pCardInfo
->si_lun
= 0x00;
1003 pCardInfo
->si_fw_revision
= ORION_FW_REV
;
1010 for (id
= 0; id
< (16 / 2); id
++) {
1013 temp
= (unsigned short)pCurrNvRam
->niSyncTbl
[id
];
1014 temp
= ((temp
& 0x03) + ((temp
<< 4) & 0xc0)) +
1015 (((temp
<< 4) & 0x0300) + ((temp
<< 8) & 0xc000));
1018 FPT_utilEERead(ioport
,
1019 (unsigned short)((SYNC_RATE_TBL
/ 2)
1022 for (i
= 0; i
< 2; temp
>>= 8, i
++) {
1029 switch (temp
& 0x3) {
1030 case AUTO_RATE_20
: /* Synchronous, 20 mega-transfers/second */
1031 temp6
|= 0x8000; /* Fall through */
1032 case AUTO_RATE_10
: /* Synchronous, 10 mega-transfers/second */
1033 temp5
|= 0x8000; /* Fall through */
1034 case AUTO_RATE_05
: /* Synchronous, 5 mega-transfers/second */
1035 temp2
|= 0x8000; /* Fall through */
1036 case AUTO_RATE_00
: /* Asynchronous */
1040 if (temp
& DISC_ENABLE_BIT
)
1043 if (temp
& WIDE_NEGO_BIT
)
1049 pCardInfo
->si_per_targ_init_sync
= temp2
;
1050 pCardInfo
->si_per_targ_no_disc
= temp3
;
1051 pCardInfo
->si_per_targ_wide_nego
= temp4
;
1052 pCardInfo
->si_per_targ_fast_nego
= temp5
;
1053 pCardInfo
->si_per_targ_ultra_nego
= temp6
;
1056 i
= pCurrNvRam
->niSysConf
;
1059 char)(FPT_utilEERead(ioport
, (SYSTEM_CONFIG
/ 2)));
1062 ScamFlg
= pCurrNvRam
->niScamConf
;
1065 (unsigned char)FPT_utilEERead(ioport
, SCAM_CONFIG
/ 2);
1067 pCardInfo
->si_flags
= 0x0000;
1070 pCardInfo
->si_flags
|= SCSI_PARITY_ENA
;
1073 pCardInfo
->si_flags
|= SOFT_RESET
;
1076 pCardInfo
->si_flags
|= EXTENDED_TRANSLATION
;
1078 if (ScamFlg
& SCAM_ENABLED
)
1079 pCardInfo
->si_flags
|= FLAG_SCAM_ENABLED
;
1081 if (ScamFlg
& SCAM_LEVEL2
)
1082 pCardInfo
->si_flags
|= FLAG_SCAM_LEVEL2
;
1084 j
= (RD_HARPOON(ioport
+ hp_bm_ctrl
) & ~SCSI_TERM_ENA_L
);
1086 j
|= SCSI_TERM_ENA_L
;
1088 WR_HARPOON(ioport
+ hp_bm_ctrl
, j
);
1090 j
= (RD_HARPOON(ioport
+ hp_ee_ctrl
) & ~SCSI_TERM_ENA_H
);
1092 j
|= SCSI_TERM_ENA_H
;
1094 WR_HARPOON(ioport
+ hp_ee_ctrl
, j
);
1096 if (!(RD_HARPOON(ioport
+ hp_page_ctrl
) & NARROW_SCSI_CARD
))
1098 pCardInfo
->si_flags
|= SUPPORT_16TAR_32LUN
;
1100 pCardInfo
->si_card_family
= HARPOON_FAMILY
;
1101 pCardInfo
->si_bustype
= BUSTYPE_PCI
;
1104 pCardInfo
->si_card_model
[0] = '9';
1105 switch (pCurrNvRam
->niModel
& 0x0f) {
1107 pCardInfo
->si_card_model
[1] = '3';
1108 pCardInfo
->si_card_model
[2] = '0';
1111 pCardInfo
->si_card_model
[1] = '5';
1112 pCardInfo
->si_card_model
[2] = '0';
1115 pCardInfo
->si_card_model
[1] = '3';
1116 pCardInfo
->si_card_model
[2] = '2';
1119 pCardInfo
->si_card_model
[1] = '5';
1120 pCardInfo
->si_card_model
[2] = '2';
1124 temp
= FPT_utilEERead(ioport
, (MODEL_NUMB_0
/ 2));
1125 pCardInfo
->si_card_model
[0] = (unsigned char)(temp
>> 8);
1126 temp
= FPT_utilEERead(ioport
, (MODEL_NUMB_2
/ 2));
1128 pCardInfo
->si_card_model
[1] = (unsigned char)(temp
& 0x00FF);
1129 pCardInfo
->si_card_model
[2] = (unsigned char)(temp
>> 8);
1132 if (pCardInfo
->si_card_model
[1] == '3') {
1133 if (RD_HARPOON(ioport
+ hp_ee_ctrl
) & BIT(7))
1134 pCardInfo
->si_flags
|= LOW_BYTE_TERM
;
1135 } else if (pCardInfo
->si_card_model
[2] == '0') {
1136 temp
= RD_HARPOON(ioport
+ hp_xfer_pad
);
1137 WR_HARPOON(ioport
+ hp_xfer_pad
, (temp
& ~BIT(4)));
1138 if (RD_HARPOON(ioport
+ hp_ee_ctrl
) & BIT(7))
1139 pCardInfo
->si_flags
|= LOW_BYTE_TERM
;
1140 WR_HARPOON(ioport
+ hp_xfer_pad
, (temp
| BIT(4)));
1141 if (RD_HARPOON(ioport
+ hp_ee_ctrl
) & BIT(7))
1142 pCardInfo
->si_flags
|= HIGH_BYTE_TERM
;
1143 WR_HARPOON(ioport
+ hp_xfer_pad
, temp
);
1145 temp
= RD_HARPOON(ioport
+ hp_ee_ctrl
);
1146 temp2
= RD_HARPOON(ioport
+ hp_xfer_pad
);
1147 WR_HARPOON(ioport
+ hp_ee_ctrl
, (temp
| SEE_CS
));
1148 WR_HARPOON(ioport
+ hp_xfer_pad
, (temp2
| BIT(4)));
1150 for (i
= 0; i
< 8; i
++) {
1152 if (!(RD_HARPOON(ioport
+ hp_ee_ctrl
) & BIT(7)))
1154 WR_HARPOON(ioport
+ hp_xfer_pad
, (temp2
& ~BIT(4)));
1155 WR_HARPOON(ioport
+ hp_xfer_pad
, (temp2
| BIT(4)));
1157 WR_HARPOON(ioport
+ hp_ee_ctrl
, temp
);
1158 WR_HARPOON(ioport
+ hp_xfer_pad
, temp2
);
1159 if (!(temp3
& BIT(7)))
1160 pCardInfo
->si_flags
|= LOW_BYTE_TERM
;
1161 if (!(temp3
& BIT(6)))
1162 pCardInfo
->si_flags
|= HIGH_BYTE_TERM
;
1165 ARAM_ACCESS(ioport
);
1167 for (i
= 0; i
< 4; i
++) {
1169 pCardInfo
->si_XlatInfo
[i
] =
1170 RD_HARPOON(ioport
+ hp_aramBase
+ BIOS_DATA_OFFSET
+ i
);
1173 /* return with -1 if no sort, else return with
1174 logical card number sorted by BIOS (zero-based) */
1176 pCardInfo
->si_relative_cardnum
=
1178 char)(RD_HARPOON(ioport
+ hp_aramBase
+ BIOS_RELATIVE_CARD
) - 1);
1180 SGRAM_ACCESS(ioport
);
1182 FPT_s_PhaseTbl
[0] = FPT_phaseDataOut
;
1183 FPT_s_PhaseTbl
[1] = FPT_phaseDataIn
;
1184 FPT_s_PhaseTbl
[2] = FPT_phaseIllegal
;
1185 FPT_s_PhaseTbl
[3] = FPT_phaseIllegal
;
1186 FPT_s_PhaseTbl
[4] = FPT_phaseCommand
;
1187 FPT_s_PhaseTbl
[5] = FPT_phaseStatus
;
1188 FPT_s_PhaseTbl
[6] = FPT_phaseMsgOut
;
1189 FPT_s_PhaseTbl
[7] = FPT_phaseMsgIn
;
1191 pCardInfo
->si_present
= 0x01;
1196 /*---------------------------------------------------------------------
1198 * Function: FlashPoint_HardwareResetHostAdapter
1200 * Description: Setup adapter for normal operation (hard reset).
1202 *---------------------------------------------------------------------*/
1204 static unsigned long FlashPoint_HardwareResetHostAdapter(struct sccb_mgr_info
1207 struct sccb_card
*CurrCard
= NULL
;
1208 struct nvram_info
*pCurrNvRam
;
1209 unsigned char i
, j
, thisCard
, ScamFlg
;
1210 unsigned short temp
, sync_bit_map
, id
;
1211 unsigned long ioport
;
1213 ioport
= pCardInfo
->si_baseaddr
;
1215 for (thisCard
= 0; thisCard
<= MAX_CARDS
; thisCard
++) {
1217 if (thisCard
== MAX_CARDS
) {
1222 if (FPT_BL_Card
[thisCard
].ioPort
== ioport
) {
1224 CurrCard
= &FPT_BL_Card
[thisCard
];
1225 FPT_SccbMgrTableInitCard(CurrCard
, thisCard
);
1229 else if (FPT_BL_Card
[thisCard
].ioPort
== 0x00) {
1231 FPT_BL_Card
[thisCard
].ioPort
= ioport
;
1232 CurrCard
= &FPT_BL_Card
[thisCard
];
1235 for (i
= 0; i
< FPT_mbCards
; i
++) {
1236 if (CurrCard
->ioPort
==
1237 FPT_nvRamInfo
[i
].niBaseAddr
)
1238 CurrCard
->pNvRamInfo
=
1241 FPT_SccbMgrTableInitCard(CurrCard
, thisCard
);
1242 CurrCard
->cardIndex
= thisCard
;
1243 CurrCard
->cardInfo
= pCardInfo
;
1249 pCurrNvRam
= CurrCard
->pNvRamInfo
;
1252 ScamFlg
= pCurrNvRam
->niScamConf
;
1255 (unsigned char)FPT_utilEERead(ioport
, SCAM_CONFIG
/ 2);
1258 FPT_BusMasterInit(ioport
);
1259 FPT_XbowInit(ioport
, ScamFlg
);
1261 FPT_autoLoadDefaultMap(ioport
);
1263 for (i
= 0, id
= 0x01; i
!= pCardInfo
->si_id
; i
++, id
<<= 1) {
1266 WR_HARPOON(ioport
+ hp_selfid_0
, id
);
1267 WR_HARPOON(ioport
+ hp_selfid_1
, 0x00);
1268 WR_HARPOON(ioport
+ hp_arb_id
, pCardInfo
->si_id
);
1269 CurrCard
->ourId
= pCardInfo
->si_id
;
1271 i
= (unsigned char)pCardInfo
->si_flags
;
1272 if (i
& SCSI_PARITY_ENA
)
1273 WR_HARPOON(ioport
+ hp_portctrl_1
, (HOST_MODE8
| CHK_SCSI_P
));
1275 j
= (RD_HARPOON(ioport
+ hp_bm_ctrl
) & ~SCSI_TERM_ENA_L
);
1276 if (i
& LOW_BYTE_TERM
)
1277 j
|= SCSI_TERM_ENA_L
;
1278 WR_HARPOON(ioport
+ hp_bm_ctrl
, j
);
1280 j
= (RD_HARPOON(ioport
+ hp_ee_ctrl
) & ~SCSI_TERM_ENA_H
);
1281 if (i
& HIGH_BYTE_TERM
)
1282 j
|= SCSI_TERM_ENA_H
;
1283 WR_HARPOON(ioport
+ hp_ee_ctrl
, j
);
1285 if (!(pCardInfo
->si_flags
& SOFT_RESET
)) {
1287 FPT_sresb(ioport
, thisCard
);
1289 FPT_scini(thisCard
, pCardInfo
->si_id
, 0);
1292 if (pCardInfo
->si_flags
& POST_ALL_UNDERRRUNS
)
1293 CurrCard
->globalFlags
|= F_NO_FILTER
;
1296 if (pCurrNvRam
->niSysConf
& 0x10)
1297 CurrCard
->globalFlags
|= F_GREEN_PC
;
1299 if (FPT_utilEERead(ioport
, (SYSTEM_CONFIG
/ 2)) & GREEN_PC_ENA
)
1300 CurrCard
->globalFlags
|= F_GREEN_PC
;
1303 /* Set global flag to indicate Re-Negotiation to be done on all
1306 if (pCurrNvRam
->niScsiConf
& 0x04)
1307 CurrCard
->globalFlags
|= F_DO_RENEGO
;
1309 if (FPT_utilEERead(ioport
, (SCSI_CONFIG
/ 2)) & RENEGO_ENA
)
1310 CurrCard
->globalFlags
|= F_DO_RENEGO
;
1314 if (pCurrNvRam
->niScsiConf
& 0x08)
1315 CurrCard
->globalFlags
|= F_CONLUN_IO
;
1317 if (FPT_utilEERead(ioport
, (SCSI_CONFIG
/ 2)) & CONNIO_ENA
)
1318 CurrCard
->globalFlags
|= F_CONLUN_IO
;
1321 temp
= pCardInfo
->si_per_targ_no_disc
;
1323 for (i
= 0, id
= 1; i
< MAX_SCSI_TAR
; i
++, id
<<= 1) {
1326 FPT_sccbMgrTbl
[thisCard
][i
].TarStatus
|= TAR_ALLOW_DISC
;
1329 sync_bit_map
= 0x0001;
1331 for (id
= 0; id
< (MAX_SCSI_TAR
/ 2); id
++) {
1334 temp
= (unsigned short)pCurrNvRam
->niSyncTbl
[id
];
1335 temp
= ((temp
& 0x03) + ((temp
<< 4) & 0xc0)) +
1336 (((temp
<< 4) & 0x0300) + ((temp
<< 8) & 0xc000));
1339 FPT_utilEERead(ioport
,
1340 (unsigned short)((SYNC_RATE_TBL
/ 2)
1343 for (i
= 0; i
< 2; temp
>>= 8, i
++) {
1345 if (pCardInfo
->si_per_targ_init_sync
& sync_bit_map
) {
1347 FPT_sccbMgrTbl
[thisCard
][id
* 2 +
1349 (unsigned char)temp
;
1353 FPT_sccbMgrTbl
[thisCard
][id
* 2 +
1356 FPT_sccbMgrTbl
[thisCard
][id
* 2 +
1358 (unsigned char)(temp
& ~EE_SYNC_MASK
);
1361 /* if ((pCardInfo->si_per_targ_wide_nego & sync_bit_map) ||
1364 if (pCardInfo
->si_per_targ_wide_nego
& sync_bit_map
) {
1366 FPT_sccbMgrTbl
[thisCard
][id
* 2 +
1372 else { /* NARROW SCSI */
1373 FPT_sccbMgrTbl
[thisCard
][id
* 2 +
1383 WR_HARPOON((ioport
+ hp_semaphore
),
1384 (unsigned char)(RD_HARPOON((ioport
+ hp_semaphore
)) |
1387 return (unsigned long)CurrCard
;
1390 static void FlashPoint_ReleaseHostAdapter(unsigned long pCurrCard
)
1393 unsigned long portBase
;
1394 unsigned long regOffset
;
1395 unsigned long scamData
;
1396 unsigned long *pScamTbl
;
1397 struct nvram_info
*pCurrNvRam
;
1399 pCurrNvRam
= ((struct sccb_card
*)pCurrCard
)->pNvRamInfo
;
1402 FPT_WrStack(pCurrNvRam
->niBaseAddr
, 0, pCurrNvRam
->niModel
);
1403 FPT_WrStack(pCurrNvRam
->niBaseAddr
, 1, pCurrNvRam
->niSysConf
);
1404 FPT_WrStack(pCurrNvRam
->niBaseAddr
, 2, pCurrNvRam
->niScsiConf
);
1405 FPT_WrStack(pCurrNvRam
->niBaseAddr
, 3, pCurrNvRam
->niScamConf
);
1406 FPT_WrStack(pCurrNvRam
->niBaseAddr
, 4, pCurrNvRam
->niAdapId
);
1408 for (i
= 0; i
< MAX_SCSI_TAR
/ 2; i
++)
1409 FPT_WrStack(pCurrNvRam
->niBaseAddr
,
1410 (unsigned char)(i
+ 5),
1411 pCurrNvRam
->niSyncTbl
[i
]);
1413 portBase
= pCurrNvRam
->niBaseAddr
;
1415 for (i
= 0; i
< MAX_SCSI_TAR
; i
++) {
1416 regOffset
= hp_aramBase
+ 64 + i
* 4;
1417 pScamTbl
= (unsigned long *)&pCurrNvRam
->niScamTbl
[i
];
1418 scamData
= *pScamTbl
;
1419 WR_HARP32(portBase
, regOffset
, scamData
);
1423 FPT_WrStack(((struct sccb_card
*)pCurrCard
)->ioPort
, 0, 0);
1427 static void FPT_RNVRamData(struct nvram_info
*pNvRamInfo
)
1430 unsigned long portBase
;
1431 unsigned long regOffset
;
1432 unsigned long scamData
;
1433 unsigned long *pScamTbl
;
1435 pNvRamInfo
->niModel
= FPT_RdStack(pNvRamInfo
->niBaseAddr
, 0);
1436 pNvRamInfo
->niSysConf
= FPT_RdStack(pNvRamInfo
->niBaseAddr
, 1);
1437 pNvRamInfo
->niScsiConf
= FPT_RdStack(pNvRamInfo
->niBaseAddr
, 2);
1438 pNvRamInfo
->niScamConf
= FPT_RdStack(pNvRamInfo
->niBaseAddr
, 3);
1439 pNvRamInfo
->niAdapId
= FPT_RdStack(pNvRamInfo
->niBaseAddr
, 4);
1441 for (i
= 0; i
< MAX_SCSI_TAR
/ 2; i
++)
1442 pNvRamInfo
->niSyncTbl
[i
] =
1443 FPT_RdStack(pNvRamInfo
->niBaseAddr
, (unsigned char)(i
+ 5));
1445 portBase
= pNvRamInfo
->niBaseAddr
;
1447 for (i
= 0; i
< MAX_SCSI_TAR
; i
++) {
1448 regOffset
= hp_aramBase
+ 64 + i
* 4;
1449 RD_HARP32(portBase
, regOffset
, scamData
);
1450 pScamTbl
= (unsigned long *)&pNvRamInfo
->niScamTbl
[i
];
1451 *pScamTbl
= scamData
;
1456 static unsigned char FPT_RdStack(unsigned long portBase
, unsigned char index
)
1458 WR_HARPOON(portBase
+ hp_stack_addr
, index
);
1459 return RD_HARPOON(portBase
+ hp_stack_data
);
1462 static void FPT_WrStack(unsigned long portBase
, unsigned char index
,
1465 WR_HARPOON(portBase
+ hp_stack_addr
, index
);
1466 WR_HARPOON(portBase
+ hp_stack_data
, data
);
1469 static unsigned char FPT_ChkIfChipInitialized(unsigned long ioPort
)
1471 if ((RD_HARPOON(ioPort
+ hp_arb_id
) & 0x0f) != FPT_RdStack(ioPort
, 4))
1473 if ((RD_HARPOON(ioPort
+ hp_clkctrl_0
) & CLKCTRL_DEFAULT
)
1476 if ((RD_HARPOON(ioPort
+ hp_seltimeout
) == TO_250ms
) ||
1477 (RD_HARPOON(ioPort
+ hp_seltimeout
) == TO_290ms
))
1483 /*---------------------------------------------------------------------
1485 * Function: FlashPoint_StartCCB
1487 * Description: Start a command pointed to by p_Sccb. When the
1488 * command is completed it will be returned via the
1489 * callback function.
1491 *---------------------------------------------------------------------*/
1492 static void FlashPoint_StartCCB(unsigned long pCurrCard
, struct sccb
*p_Sccb
)
1494 unsigned long ioport
;
1495 unsigned char thisCard
, lun
;
1496 struct sccb
*pSaveSccb
;
1497 CALL_BK_FN callback
;
1499 thisCard
= ((struct sccb_card
*)pCurrCard
)->cardIndex
;
1500 ioport
= ((struct sccb_card
*)pCurrCard
)->ioPort
;
1502 if ((p_Sccb
->TargID
>= MAX_SCSI_TAR
) || (p_Sccb
->Lun
>= MAX_LUN
)) {
1504 p_Sccb
->HostStatus
= SCCB_COMPLETE
;
1505 p_Sccb
->SccbStatus
= SCCB_ERROR
;
1506 callback
= (CALL_BK_FN
) p_Sccb
->SccbCallback
;
1513 FPT_sinits(p_Sccb
, thisCard
);
1515 if (!((struct sccb_card
*)pCurrCard
)->cmdCounter
) {
1516 WR_HARPOON(ioport
+ hp_semaphore
,
1517 (RD_HARPOON(ioport
+ hp_semaphore
)
1518 | SCCB_MGR_ACTIVE
));
1520 if (((struct sccb_card
*)pCurrCard
)->globalFlags
& F_GREEN_PC
) {
1521 WR_HARPOON(ioport
+ hp_clkctrl_0
, CLKCTRL_DEFAULT
);
1522 WR_HARPOON(ioport
+ hp_sys_ctrl
, 0x00);
1526 ((struct sccb_card
*)pCurrCard
)->cmdCounter
++;
1528 if (RD_HARPOON(ioport
+ hp_semaphore
) & BIOS_IN_USE
) {
1530 WR_HARPOON(ioport
+ hp_semaphore
,
1531 (RD_HARPOON(ioport
+ hp_semaphore
)
1533 if (p_Sccb
->OperationCode
== RESET_COMMAND
) {
1535 ((struct sccb_card
*)pCurrCard
)->currentSCCB
;
1536 ((struct sccb_card
*)pCurrCard
)->currentSCCB
= p_Sccb
;
1537 FPT_queueSelectFail(&FPT_BL_Card
[thisCard
], thisCard
);
1538 ((struct sccb_card
*)pCurrCard
)->currentSCCB
=
1541 FPT_queueAddSccb(p_Sccb
, thisCard
);
1545 else if ((RD_HARPOON(ioport
+ hp_page_ctrl
) & G_INT_DISABLE
)) {
1547 if (p_Sccb
->OperationCode
== RESET_COMMAND
) {
1549 ((struct sccb_card
*)pCurrCard
)->currentSCCB
;
1550 ((struct sccb_card
*)pCurrCard
)->currentSCCB
= p_Sccb
;
1551 FPT_queueSelectFail(&FPT_BL_Card
[thisCard
], thisCard
);
1552 ((struct sccb_card
*)pCurrCard
)->currentSCCB
=
1555 FPT_queueAddSccb(p_Sccb
, thisCard
);
1561 MDISABLE_INT(ioport
);
1563 if ((((struct sccb_card
*)pCurrCard
)->globalFlags
& F_CONLUN_IO
)
1565 ((FPT_sccbMgrTbl
[thisCard
][p_Sccb
->TargID
].
1566 TarStatus
& TAR_TAG_Q_MASK
) != TAG_Q_TRYING
))
1570 if ((((struct sccb_card
*)pCurrCard
)->currentSCCB
== NULL
) &&
1571 (FPT_sccbMgrTbl
[thisCard
][p_Sccb
->TargID
].TarSelQ_Cnt
== 0)
1572 && (FPT_sccbMgrTbl
[thisCard
][p_Sccb
->TargID
].TarLUNBusy
[lun
]
1575 ((struct sccb_card
*)pCurrCard
)->currentSCCB
= p_Sccb
;
1576 FPT_ssel(p_Sccb
->SccbIOPort
, thisCard
);
1581 if (p_Sccb
->OperationCode
== RESET_COMMAND
) {
1583 ((struct sccb_card
*)pCurrCard
)->
1585 ((struct sccb_card
*)pCurrCard
)->currentSCCB
=
1587 FPT_queueSelectFail(&FPT_BL_Card
[thisCard
],
1589 ((struct sccb_card
*)pCurrCard
)->currentSCCB
=
1592 FPT_queueAddSccb(p_Sccb
, thisCard
);
1596 MENABLE_INT(ioport
);
1601 /*---------------------------------------------------------------------
1603 * Function: FlashPoint_AbortCCB
1605 * Description: Abort the command pointed to by p_Sccb. When the
1606 * command is completed it will be returned via the
1607 * callback function.
1609 *---------------------------------------------------------------------*/
1610 static int FlashPoint_AbortCCB(unsigned long pCurrCard
, struct sccb
*p_Sccb
)
1612 unsigned long ioport
;
1614 unsigned char thisCard
;
1615 CALL_BK_FN callback
;
1617 struct sccb
*pSaveSCCB
;
1618 struct sccb_mgr_tar_info
*currTar_Info
;
1620 ioport
= ((struct sccb_card
*)pCurrCard
)->ioPort
;
1622 thisCard
= ((struct sccb_card
*)pCurrCard
)->cardIndex
;
1624 if (!(RD_HARPOON(ioport
+ hp_page_ctrl
) & G_INT_DISABLE
)) {
1626 if (FPT_queueFindSccb(p_Sccb
, thisCard
)) {
1628 ((struct sccb_card
*)pCurrCard
)->cmdCounter
--;
1630 if (!((struct sccb_card
*)pCurrCard
)->cmdCounter
)
1631 WR_HARPOON(ioport
+ hp_semaphore
,
1632 (RD_HARPOON(ioport
+ hp_semaphore
)
1634 char)(~(SCCB_MGR_ACTIVE
|
1637 p_Sccb
->SccbStatus
= SCCB_ABORT
;
1638 callback
= p_Sccb
->SccbCallback
;
1645 if (((struct sccb_card
*)pCurrCard
)->currentSCCB
==
1647 p_Sccb
->SccbStatus
= SCCB_ABORT
;
1654 TID
= p_Sccb
->TargID
;
1656 if (p_Sccb
->Sccb_tag
) {
1657 MDISABLE_INT(ioport
);
1658 if (((struct sccb_card
*)pCurrCard
)->
1659 discQ_Tbl
[p_Sccb
->Sccb_tag
] ==
1661 p_Sccb
->SccbStatus
= SCCB_ABORT
;
1662 p_Sccb
->Sccb_scsistat
=
1664 p_Sccb
->Sccb_scsimsg
=
1667 if (((struct sccb_card
*)
1668 pCurrCard
)->currentSCCB
==
1670 ((struct sccb_card
*)
1672 currentSCCB
= p_Sccb
;
1680 ((struct sccb_card
*)
1682 currentSCCB
= p_Sccb
;
1683 FPT_queueSelectFail((struct sccb_card
*)pCurrCard
, thisCard
);
1684 ((struct sccb_card
*)
1686 currentSCCB
= pSaveSCCB
;
1689 MENABLE_INT(ioport
);
1693 &FPT_sccbMgrTbl
[thisCard
][p_Sccb
->
1696 if (FPT_BL_Card
[thisCard
].
1697 discQ_Tbl
[currTar_Info
->
1698 LunDiscQ_Idx
[p_Sccb
->Lun
]]
1700 p_Sccb
->SccbStatus
= SCCB_ABORT
;
1710 /*---------------------------------------------------------------------
1712 * Function: FlashPoint_InterruptPending
1714 * Description: Do a quick check to determine if there is a pending
1715 * interrupt for this card and disable the IRQ Pin if so.
1717 *---------------------------------------------------------------------*/
1718 static unsigned char FlashPoint_InterruptPending(unsigned long pCurrCard
)
1720 unsigned long ioport
;
1722 ioport
= ((struct sccb_card
*)pCurrCard
)->ioPort
;
1724 if (RD_HARPOON(ioport
+ hp_int_status
) & INT_ASSERTED
) {
1733 /*---------------------------------------------------------------------
1735 * Function: FlashPoint_HandleInterrupt
1737 * Description: This is our entry point when an interrupt is generated
1738 * by the card and the upper level driver passes it on to
1741 *---------------------------------------------------------------------*/
1742 static int FlashPoint_HandleInterrupt(unsigned long pCurrCard
)
1744 struct sccb
*currSCCB
;
1745 unsigned char thisCard
, result
, bm_status
, bm_int_st
;
1746 unsigned short hp_int
;
1747 unsigned char i
, target
;
1748 unsigned long ioport
;
1750 thisCard
= ((struct sccb_card
*)pCurrCard
)->cardIndex
;
1751 ioport
= ((struct sccb_card
*)pCurrCard
)->ioPort
;
1753 MDISABLE_INT(ioport
);
1755 if ((bm_int_st
= RD_HARPOON(ioport
+ hp_int_status
)) & EXT_STATUS_ON
)
1758 hp_ext_status
) & (unsigned char)BAD_EXT_STATUS
;
1762 WR_HARPOON(ioport
+ hp_int_mask
, (INT_CMD_COMPL
| SCSI_INTERRUPT
));
1765 RDW_HARPOON((ioport
+
1766 hp_intstat
)) & FPT_default_intena
) | bm_status
) {
1768 currSCCB
= ((struct sccb_card
*)pCurrCard
)->currentSCCB
;
1770 if (hp_int
& (FIFO
| TIMEOUT
| RESET
| SCAM_SEL
) || bm_status
) {
1772 FPT_SccbMgr_bad_isr(ioport
, thisCard
,
1773 ((struct sccb_card
*)pCurrCard
),
1775 WRW_HARPOON((ioport
+ hp_intstat
),
1776 (FIFO
| TIMEOUT
| RESET
| SCAM_SEL
));
1781 MENABLE_INT(ioport
);
1786 else if (hp_int
& ICMD_COMP
) {
1788 if (!(hp_int
& BUS_FREE
)) {
1789 /* Wait for the BusFree before starting a new command. We
1790 must also check for being reselected since the BusFree
1791 may not show up if another device reselects us in 1.5us or
1792 less. SRR Wednesday, 3/8/1995.
1795 (RDW_HARPOON((ioport
+ hp_intstat
)) &
1796 (BUS_FREE
| RSEL
))) ;
1799 if (((struct sccb_card
*)pCurrCard
)->
1800 globalFlags
& F_HOST_XFER_ACT
)
1802 FPT_phaseChkFifo(ioport
, thisCard
);
1804 /* WRW_HARPOON((ioport+hp_intstat),
1805 (BUS_FREE | ICMD_COMP | ITAR_DISC | XFER_CNT_0));
1808 WRW_HARPOON((ioport
+ hp_intstat
), CLR_ALL_INT_1
);
1810 FPT_autoCmdCmplt(ioport
, thisCard
);
1814 else if (hp_int
& ITAR_DISC
) {
1816 if (((struct sccb_card
*)pCurrCard
)->
1817 globalFlags
& F_HOST_XFER_ACT
) {
1819 FPT_phaseChkFifo(ioport
, thisCard
);
1823 if (RD_HARPOON(ioport
+ hp_gp_reg_1
) == SMSAVE_DATA_PTR
) {
1825 WR_HARPOON(ioport
+ hp_gp_reg_1
, 0x00);
1826 currSCCB
->Sccb_XferState
|= F_NO_DATA_YET
;
1828 currSCCB
->Sccb_savedATC
= currSCCB
->Sccb_ATC
;
1831 currSCCB
->Sccb_scsistat
= DISCONNECT_ST
;
1832 FPT_queueDisconnect(currSCCB
, thisCard
);
1834 /* Wait for the BusFree before starting a new command. We
1835 must also check for being reselected since the BusFree
1836 may not show up if another device reselects us in 1.5us or
1837 less. SRR Wednesday, 3/8/1995.
1840 (RDW_HARPOON((ioport
+ hp_intstat
)) &
1842 && !((RDW_HARPOON((ioport
+ hp_intstat
)) & PHASE
)
1843 && RD_HARPOON((ioport
+ hp_scsisig
)) ==
1844 (SCSI_BSY
| SCSI_REQ
| SCSI_CD
| SCSI_MSG
|
1848 The additional loop exit condition above detects a timing problem
1849 with the revision D/E harpoon chips. The caller should reset the
1850 host adapter to recover when 0xFE is returned.
1853 (RDW_HARPOON((ioport
+ hp_intstat
)) &
1854 (BUS_FREE
| RSEL
))) {
1855 MENABLE_INT(ioport
);
1859 WRW_HARPOON((ioport
+ hp_intstat
),
1860 (BUS_FREE
| ITAR_DISC
));
1862 ((struct sccb_card
*)pCurrCard
)->globalFlags
|=
1867 else if (hp_int
& RSEL
) {
1869 WRW_HARPOON((ioport
+ hp_intstat
),
1870 (PROG_HLT
| RSEL
| PHASE
| BUS_FREE
));
1872 if (RDW_HARPOON((ioport
+ hp_intstat
)) & ITAR_DISC
) {
1873 if (((struct sccb_card
*)pCurrCard
)->
1874 globalFlags
& F_HOST_XFER_ACT
) {
1875 FPT_phaseChkFifo(ioport
, thisCard
);
1878 if (RD_HARPOON(ioport
+ hp_gp_reg_1
) ==
1880 WR_HARPOON(ioport
+ hp_gp_reg_1
, 0x00);
1881 currSCCB
->Sccb_XferState
|=
1883 currSCCB
->Sccb_savedATC
=
1887 WRW_HARPOON((ioport
+ hp_intstat
),
1888 (BUS_FREE
| ITAR_DISC
));
1889 currSCCB
->Sccb_scsistat
= DISCONNECT_ST
;
1890 FPT_queueDisconnect(currSCCB
, thisCard
);
1893 FPT_sres(ioport
, thisCard
,
1894 ((struct sccb_card
*)pCurrCard
));
1895 FPT_phaseDecode(ioport
, thisCard
);
1899 else if ((hp_int
& IDO_STRT
) && (!(hp_int
& BUS_FREE
))) {
1901 WRW_HARPOON((ioport
+ hp_intstat
),
1902 (IDO_STRT
| XFER_CNT_0
));
1903 FPT_phaseDecode(ioport
, thisCard
);
1907 else if ((hp_int
& IUNKWN
) || (hp_int
& PROG_HLT
)) {
1908 WRW_HARPOON((ioport
+ hp_intstat
),
1909 (PHASE
| IUNKWN
| PROG_HLT
));
1910 if ((RD_HARPOON(ioport
+ hp_prgmcnt_0
) & (unsigned char)
1911 0x3f) < (unsigned char)SELCHK
) {
1912 FPT_phaseDecode(ioport
, thisCard
);
1914 /* Harpoon problem some SCSI target device respond to selection
1915 with short BUSY pulse (<400ns) this will make the Harpoon is not able
1916 to latch the correct Target ID into reg. x53.
1917 The work around require to correct this reg. But when write to this
1918 reg. (0x53) also increment the FIFO write addr reg (0x6f), thus we
1919 need to read this reg first then restore it later. After update to 0x53 */
1922 char)(RD_HARPOON(ioport
+ hp_fifowrite
));
1925 char)(RD_HARPOON(ioport
+ hp_gp_reg_3
));
1926 WR_HARPOON(ioport
+ hp_xfer_pad
,
1927 (unsigned char)ID_UNLOCK
);
1928 WR_HARPOON(ioport
+ hp_select_id
,
1929 (unsigned char)(target
| target
<<
1931 WR_HARPOON(ioport
+ hp_xfer_pad
,
1932 (unsigned char)0x00);
1933 WR_HARPOON(ioport
+ hp_fifowrite
, i
);
1934 WR_HARPOON(ioport
+ hp_autostart_3
,
1935 (AUTO_IMMED
+ TAG_STRT
));
1939 else if (hp_int
& XFER_CNT_0
) {
1941 WRW_HARPOON((ioport
+ hp_intstat
), XFER_CNT_0
);
1943 FPT_schkdd(ioport
, thisCard
);
1947 else if (hp_int
& BUS_FREE
) {
1949 WRW_HARPOON((ioport
+ hp_intstat
), BUS_FREE
);
1951 if (((struct sccb_card
*)pCurrCard
)->
1952 globalFlags
& F_HOST_XFER_ACT
) {
1954 FPT_hostDataXferAbort(ioport
, thisCard
,
1958 FPT_phaseBusFree(ioport
, thisCard
);
1961 else if (hp_int
& ITICKLE
) {
1963 WRW_HARPOON((ioport
+ hp_intstat
), ITICKLE
);
1964 ((struct sccb_card
*)pCurrCard
)->globalFlags
|=
1968 if (((struct sccb_card
*)pCurrCard
)->
1969 globalFlags
& F_NEW_SCCB_CMD
) {
1971 ((struct sccb_card
*)pCurrCard
)->globalFlags
&=
1974 if (((struct sccb_card
*)pCurrCard
)->currentSCCB
==
1977 FPT_queueSearchSelect(((struct sccb_card
*)
1978 pCurrCard
), thisCard
);
1981 if (((struct sccb_card
*)pCurrCard
)->currentSCCB
!=
1983 ((struct sccb_card
*)pCurrCard
)->globalFlags
&=
1985 FPT_ssel(ioport
, thisCard
);
1994 MENABLE_INT(ioport
);
1999 /*---------------------------------------------------------------------
2001 * Function: Sccb_bad_isr
2003 * Description: Some type of interrupt has occurred which is slightly
2004 * out of the ordinary. We will now decode it fully, in
2005 * this routine. This is broken up in an attempt to save
2008 *---------------------------------------------------------------------*/
2009 static unsigned char FPT_SccbMgr_bad_isr(unsigned long p_port
,
2010 unsigned char p_card
,
2011 struct sccb_card
*pCurrCard
,
2012 unsigned short p_int
)
2014 unsigned char temp
, ScamFlg
;
2015 struct sccb_mgr_tar_info
*currTar_Info
;
2016 struct nvram_info
*pCurrNvRam
;
2018 if (RD_HARPOON(p_port
+ hp_ext_status
) &
2019 (BM_FORCE_OFF
| PCI_DEV_TMOUT
| BM_PARITY_ERR
| PIO_OVERRUN
)) {
2021 if (pCurrCard
->globalFlags
& F_HOST_XFER_ACT
) {
2023 FPT_hostDataXferAbort(p_port
, p_card
,
2024 pCurrCard
->currentSCCB
);
2027 if (RD_HARPOON(p_port
+ hp_pci_stat_cfg
) & REC_MASTER_ABORT
)
2029 WR_HARPOON(p_port
+ hp_pci_stat_cfg
,
2030 (RD_HARPOON(p_port
+ hp_pci_stat_cfg
) &
2031 ~REC_MASTER_ABORT
));
2033 WR_HARPOON(p_port
+ hp_host_blk_cnt
, 0x00);
2037 if (pCurrCard
->currentSCCB
!= NULL
) {
2039 if (!pCurrCard
->currentSCCB
->HostStatus
)
2040 pCurrCard
->currentSCCB
->HostStatus
=
2043 FPT_sxfrp(p_port
, p_card
);
2045 temp
= (unsigned char)(RD_HARPOON(p_port
+ hp_ee_ctrl
) &
2046 (EXT_ARB_ACK
| SCSI_TERM_ENA_H
));
2047 WR_HARPOON(p_port
+ hp_ee_ctrl
,
2048 ((unsigned char)temp
| SEE_MS
| SEE_CS
));
2049 WR_HARPOON(p_port
+ hp_ee_ctrl
, temp
);
2052 (RDW_HARPOON((p_port
+ hp_intstat
)) &
2053 (BUS_FREE
| RESET
))) {
2054 FPT_phaseDecode(p_port
, p_card
);
2059 else if (p_int
& RESET
) {
2061 WR_HARPOON(p_port
+ hp_clkctrl_0
, CLKCTRL_DEFAULT
);
2062 WR_HARPOON(p_port
+ hp_sys_ctrl
, 0x00);
2063 if (pCurrCard
->currentSCCB
!= NULL
) {
2065 if (pCurrCard
->globalFlags
& F_HOST_XFER_ACT
)
2067 FPT_hostDataXferAbort(p_port
, p_card
,
2068 pCurrCard
->currentSCCB
);
2071 DISABLE_AUTO(p_port
);
2073 FPT_sresb(p_port
, p_card
);
2075 while (RD_HARPOON(p_port
+ hp_scsictrl_0
) & SCSI_RST
) {
2078 pCurrNvRam
= pCurrCard
->pNvRamInfo
;
2080 ScamFlg
= pCurrNvRam
->niScamConf
;
2083 (unsigned char)FPT_utilEERead(p_port
,
2087 FPT_XbowInit(p_port
, ScamFlg
);
2089 FPT_scini(p_card
, pCurrCard
->ourId
, 0);
2094 else if (p_int
& FIFO
) {
2096 WRW_HARPOON((p_port
+ hp_intstat
), FIFO
);
2098 if (pCurrCard
->currentSCCB
!= NULL
)
2099 FPT_sxfrp(p_port
, p_card
);
2102 else if (p_int
& TIMEOUT
) {
2104 DISABLE_AUTO(p_port
);
2106 WRW_HARPOON((p_port
+ hp_intstat
),
2107 (PROG_HLT
| TIMEOUT
| SEL
| BUS_FREE
| PHASE
|
2110 pCurrCard
->currentSCCB
->HostStatus
= SCCB_SELECTION_TIMEOUT
;
2113 &FPT_sccbMgrTbl
[p_card
][pCurrCard
->currentSCCB
->TargID
];
2114 if ((pCurrCard
->globalFlags
& F_CONLUN_IO
)
2115 && ((currTar_Info
->TarStatus
& TAR_TAG_Q_MASK
) !=
2117 currTar_Info
->TarLUNBusy
[pCurrCard
->currentSCCB
->Lun
] =
2120 currTar_Info
->TarLUNBusy
[0] = 0;
2122 if (currTar_Info
->TarEEValue
& EE_SYNC_MASK
) {
2123 currTar_Info
->TarSyncCtrl
= 0;
2124 currTar_Info
->TarStatus
&= ~TAR_SYNC_MASK
;
2127 if (currTar_Info
->TarEEValue
& EE_WIDE_SCSI
) {
2128 currTar_Info
->TarStatus
&= ~TAR_WIDE_MASK
;
2131 FPT_sssyncv(p_port
, pCurrCard
->currentSCCB
->TargID
, NARROW_SCSI
,
2134 FPT_queueCmdComplete(pCurrCard
, pCurrCard
->currentSCCB
, p_card
);
2138 else if (p_int
& SCAM_SEL
) {
2140 FPT_scarb(p_port
, LEVEL2_TAR
);
2142 FPT_scasid(p_card
, p_port
);
2146 WRW_HARPOON((p_port
+ hp_intstat
), SCAM_SEL
);
2152 /*---------------------------------------------------------------------
2154 * Function: SccbMgrTableInit
2156 * Description: Initialize all Sccb manager data structures.
2158 *---------------------------------------------------------------------*/
2160 static void FPT_SccbMgrTableInitAll()
2162 unsigned char thisCard
;
2164 for (thisCard
= 0; thisCard
< MAX_CARDS
; thisCard
++) {
2165 FPT_SccbMgrTableInitCard(&FPT_BL_Card
[thisCard
], thisCard
);
2167 FPT_BL_Card
[thisCard
].ioPort
= 0x00;
2168 FPT_BL_Card
[thisCard
].cardInfo
= NULL
;
2169 FPT_BL_Card
[thisCard
].cardIndex
= 0xFF;
2170 FPT_BL_Card
[thisCard
].ourId
= 0x00;
2171 FPT_BL_Card
[thisCard
].pNvRamInfo
= NULL
;
2175 /*---------------------------------------------------------------------
2177 * Function: SccbMgrTableInit
2179 * Description: Initialize all Sccb manager data structures.
2181 *---------------------------------------------------------------------*/
2183 static void FPT_SccbMgrTableInitCard(struct sccb_card
*pCurrCard
,
2184 unsigned char p_card
)
2186 unsigned char scsiID
, qtag
;
2188 for (qtag
= 0; qtag
< QUEUE_DEPTH
; qtag
++) {
2189 FPT_BL_Card
[p_card
].discQ_Tbl
[qtag
] = NULL
;
2192 for (scsiID
= 0; scsiID
< MAX_SCSI_TAR
; scsiID
++) {
2193 FPT_sccbMgrTbl
[p_card
][scsiID
].TarStatus
= 0;
2194 FPT_sccbMgrTbl
[p_card
][scsiID
].TarEEValue
= 0;
2195 FPT_SccbMgrTableInitTarget(p_card
, scsiID
);
2198 pCurrCard
->scanIndex
= 0x00;
2199 pCurrCard
->currentSCCB
= NULL
;
2200 pCurrCard
->globalFlags
= 0x00;
2201 pCurrCard
->cmdCounter
= 0x00;
2202 pCurrCard
->tagQ_Lst
= 0x01;
2203 pCurrCard
->discQCount
= 0;
2207 /*---------------------------------------------------------------------
2209 * Function: SccbMgrTableInit
2211 * Description: Initialize all Sccb manager data structures.
2213 *---------------------------------------------------------------------*/
2215 static void FPT_SccbMgrTableInitTarget(unsigned char p_card
,
2216 unsigned char target
)
2219 unsigned char lun
, qtag
;
2220 struct sccb_mgr_tar_info
*currTar_Info
;
2222 currTar_Info
= &FPT_sccbMgrTbl
[p_card
][target
];
2224 currTar_Info
->TarSelQ_Cnt
= 0;
2225 currTar_Info
->TarSyncCtrl
= 0;
2227 currTar_Info
->TarSelQ_Head
= NULL
;
2228 currTar_Info
->TarSelQ_Tail
= NULL
;
2229 currTar_Info
->TarTagQ_Cnt
= 0;
2230 currTar_Info
->TarLUN_CA
= 0;
2232 for (lun
= 0; lun
< MAX_LUN
; lun
++) {
2233 currTar_Info
->TarLUNBusy
[lun
] = 0;
2234 currTar_Info
->LunDiscQ_Idx
[lun
] = 0;
2237 for (qtag
= 0; qtag
< QUEUE_DEPTH
; qtag
++) {
2238 if (FPT_BL_Card
[p_card
].discQ_Tbl
[qtag
] != NULL
) {
2239 if (FPT_BL_Card
[p_card
].discQ_Tbl
[qtag
]->TargID
==
2241 FPT_BL_Card
[p_card
].discQ_Tbl
[qtag
] = NULL
;
2242 FPT_BL_Card
[p_card
].discQCount
--;
2248 /*---------------------------------------------------------------------
2252 * Description: Read in a message byte from the SCSI bus, and check
2253 * for a parity error.
2255 *---------------------------------------------------------------------*/
2257 static unsigned char FPT_sfm(unsigned long port
, struct sccb
*pCurrSCCB
)
2259 unsigned char message
;
2260 unsigned short TimeOutLoop
;
2263 while ((!(RD_HARPOON(port
+ hp_scsisig
) & SCSI_REQ
)) &&
2264 (TimeOutLoop
++ < 20000)) {
2267 WR_HARPOON(port
+ hp_portctrl_0
, SCSI_PORT
);
2269 message
= RD_HARPOON(port
+ hp_scsidata_0
);
2271 WR_HARPOON(port
+ hp_scsisig
, SCSI_ACK
+ S_MSGI_PH
);
2273 if (TimeOutLoop
> 20000)
2274 message
= 0x00; /* force message byte = 0 if Time Out on Req */
2276 if ((RDW_HARPOON((port
+ hp_intstat
)) & PARITY
) &&
2277 (RD_HARPOON(port
+ hp_addstat
) & SCSI_PAR_ERR
)) {
2278 WR_HARPOON(port
+ hp_scsisig
, (SCSI_ACK
+ S_ILL_PH
));
2279 WR_HARPOON(port
+ hp_xferstat
, 0);
2280 WR_HARPOON(port
+ hp_fiforead
, 0);
2281 WR_HARPOON(port
+ hp_fifowrite
, 0);
2282 if (pCurrSCCB
!= NULL
) {
2283 pCurrSCCB
->Sccb_scsimsg
= SMPARITY
;
2287 ACCEPT_MSG_ATN(port
);
2289 while ((!(RD_HARPOON(port
+ hp_scsisig
) & SCSI_REQ
)) &&
2290 (TimeOutLoop
++ < 20000)) {
2292 if (TimeOutLoop
> 20000) {
2293 WRW_HARPOON((port
+ hp_intstat
), PARITY
);
2296 if ((RD_HARPOON(port
+ hp_scsisig
) & S_SCSI_PHZ
) !=
2298 WRW_HARPOON((port
+ hp_intstat
), PARITY
);
2301 WR_HARPOON(port
+ hp_portctrl_0
, SCSI_PORT
);
2303 RD_HARPOON(port
+ hp_scsidata_0
);
2305 WR_HARPOON(port
+ hp_scsisig
, (SCSI_ACK
+ S_ILL_PH
));
2310 WR_HARPOON(port
+ hp_scsisig
, (SCSI_ACK
+ S_ILL_PH
));
2311 WR_HARPOON(port
+ hp_xferstat
, 0);
2312 WR_HARPOON(port
+ hp_fiforead
, 0);
2313 WR_HARPOON(port
+ hp_fifowrite
, 0);
2317 /*---------------------------------------------------------------------
2319 * Function: FPT_ssel
2321 * Description: Load up automation and select target device.
2323 *---------------------------------------------------------------------*/
2325 static void FPT_ssel(unsigned long port
, unsigned char p_card
)
2328 unsigned char auto_loaded
, i
, target
, *theCCB
;
2330 unsigned long cdb_reg
;
2331 struct sccb_card
*CurrCard
;
2332 struct sccb
*currSCCB
;
2333 struct sccb_mgr_tar_info
*currTar_Info
;
2334 unsigned char lastTag
, lun
;
2336 CurrCard
= &FPT_BL_Card
[p_card
];
2337 currSCCB
= CurrCard
->currentSCCB
;
2338 target
= currSCCB
->TargID
;
2339 currTar_Info
= &FPT_sccbMgrTbl
[p_card
][target
];
2340 lastTag
= CurrCard
->tagQ_Lst
;
2344 if ((currTar_Info
->TarStatus
& TAR_TAG_Q_MASK
) == TAG_Q_REJECT
)
2345 currSCCB
->ControlByte
&= ~F_USE_CMD_Q
;
2347 if (((CurrCard
->globalFlags
& F_CONLUN_IO
) &&
2348 ((currTar_Info
->TarStatus
& TAR_TAG_Q_MASK
) != TAG_Q_TRYING
)))
2350 lun
= currSCCB
->Lun
;
2354 if (CurrCard
->globalFlags
& F_TAG_STARTED
) {
2355 if (!(currSCCB
->ControlByte
& F_USE_CMD_Q
)) {
2356 if ((currTar_Info
->TarLUN_CA
== 0)
2357 && ((currTar_Info
->TarStatus
& TAR_TAG_Q_MASK
)
2360 if (currTar_Info
->TarTagQ_Cnt
!= 0) {
2361 currTar_Info
->TarLUNBusy
[lun
] = 1;
2362 FPT_queueSelectFail(CurrCard
, p_card
);
2368 currTar_Info
->TarLUNBusy
[lun
] = 1;
2374 currTar_Info
->TarLUNBusy
[lun
] = 1;
2378 /*!Use cmd Q Tagged */
2380 if (currTar_Info
->TarLUN_CA
== 1) {
2381 FPT_queueSelectFail(CurrCard
, p_card
);
2386 currTar_Info
->TarLUNBusy
[lun
] = 1;
2388 } /*else use cmd Q tagged */
2391 /*if glob tagged started */
2393 currTar_Info
->TarLUNBusy
[lun
] = 1;
2396 if ((((CurrCard
->globalFlags
& F_CONLUN_IO
) &&
2397 ((currTar_Info
->TarStatus
& TAR_TAG_Q_MASK
) != TAG_Q_TRYING
))
2398 || (!(currSCCB
->ControlByte
& F_USE_CMD_Q
)))) {
2399 if (CurrCard
->discQCount
>= QUEUE_DEPTH
) {
2400 currTar_Info
->TarLUNBusy
[lun
] = 1;
2401 FPT_queueSelectFail(CurrCard
, p_card
);
2405 for (i
= 1; i
< QUEUE_DEPTH
; i
++) {
2406 if (++lastTag
>= QUEUE_DEPTH
)
2408 if (CurrCard
->discQ_Tbl
[lastTag
] == NULL
) {
2409 CurrCard
->tagQ_Lst
= lastTag
;
2410 currTar_Info
->LunDiscQ_Idx
[lun
] = lastTag
;
2411 CurrCard
->discQ_Tbl
[lastTag
] = currSCCB
;
2412 CurrCard
->discQCount
++;
2416 if (i
== QUEUE_DEPTH
) {
2417 currTar_Info
->TarLUNBusy
[lun
] = 1;
2418 FPT_queueSelectFail(CurrCard
, p_card
);
2426 WR_HARPOON(port
+ hp_select_id
, target
);
2427 WR_HARPOON(port
+ hp_gp_reg_3
, target
); /* Use by new automation logic */
2429 if (currSCCB
->OperationCode
== RESET_COMMAND
) {
2430 WRW_HARPOON((port
+ ID_MSG_STRT
), (MPM_OP
+ AMSG_OUT
+
2432 Sccb_idmsg
& ~DISC_PRIV
)));
2434 WRW_HARPOON((port
+ ID_MSG_STRT
+ 2), BRH_OP
+ ALWAYS
+ NP
);
2436 currSCCB
->Sccb_scsimsg
= SMDEV_RESET
;
2438 WR_HARPOON(port
+ hp_autostart_3
, (SELECT
+ SELCHK_STRT
));
2440 currSCCB
->Sccb_scsistat
= SELECT_BDR_ST
;
2442 if (currTar_Info
->TarEEValue
& EE_SYNC_MASK
) {
2443 currTar_Info
->TarSyncCtrl
= 0;
2444 currTar_Info
->TarStatus
&= ~TAR_SYNC_MASK
;
2447 if (currTar_Info
->TarEEValue
& EE_WIDE_SCSI
) {
2448 currTar_Info
->TarStatus
&= ~TAR_WIDE_MASK
;
2451 FPT_sssyncv(port
, target
, NARROW_SCSI
, currTar_Info
);
2452 FPT_SccbMgrTableInitTarget(p_card
, target
);
2456 else if (currSCCB
->Sccb_scsistat
== ABORT_ST
) {
2457 WRW_HARPOON((port
+ ID_MSG_STRT
), (MPM_OP
+ AMSG_OUT
+
2459 Sccb_idmsg
& ~DISC_PRIV
)));
2461 WRW_HARPOON((port
+ ID_MSG_STRT
+ 2), BRH_OP
+ ALWAYS
+ CMDPZ
);
2463 WRW_HARPOON((port
+ SYNC_MSGS
+ 0), (MPM_OP
+ AMSG_OUT
+
2468 >> 6) | (unsigned char)
2470 WRW_HARPOON((port
+ SYNC_MSGS
+ 2),
2471 (MPM_OP
+ AMSG_OUT
+ currSCCB
->Sccb_tag
));
2472 WRW_HARPOON((port
+ SYNC_MSGS
+ 4), (BRH_OP
+ ALWAYS
+ NP
));
2474 WR_HARPOON(port
+ hp_autostart_3
, (SELECT
+ SELCHK_STRT
));
2479 else if (!(currTar_Info
->TarStatus
& WIDE_NEGOCIATED
)) {
2480 auto_loaded
= FPT_siwidn(port
, p_card
);
2481 currSCCB
->Sccb_scsistat
= SELECT_WN_ST
;
2484 else if (!((currTar_Info
->TarStatus
& TAR_SYNC_MASK
)
2485 == SYNC_SUPPORTED
)) {
2486 auto_loaded
= FPT_sisyncn(port
, p_card
, 0);
2487 currSCCB
->Sccb_scsistat
= SELECT_SN_ST
;
2492 if (currSCCB
->ControlByte
& F_USE_CMD_Q
) {
2494 CurrCard
->globalFlags
|= F_TAG_STARTED
;
2496 if ((currTar_Info
->TarStatus
& TAR_TAG_Q_MASK
)
2498 currSCCB
->ControlByte
&= ~F_USE_CMD_Q
;
2500 /* Fix up the start instruction with a jump to
2501 Non-Tag-CMD handling */
2502 WRW_HARPOON((port
+ ID_MSG_STRT
),
2503 BRH_OP
+ ALWAYS
+ NTCMD
);
2505 WRW_HARPOON((port
+ NON_TAG_ID_MSG
),
2506 (MPM_OP
+ AMSG_OUT
+
2507 currSCCB
->Sccb_idmsg
));
2509 WR_HARPOON(port
+ hp_autostart_3
,
2510 (SELECT
+ SELCHK_STRT
));
2512 /* Setup our STATE so we know what happend when
2513 the wheels fall off. */
2514 currSCCB
->Sccb_scsistat
= SELECT_ST
;
2516 currTar_Info
->TarLUNBusy
[lun
] = 1;
2520 WRW_HARPOON((port
+ ID_MSG_STRT
),
2521 (MPM_OP
+ AMSG_OUT
+
2522 currSCCB
->Sccb_idmsg
));
2524 WRW_HARPOON((port
+ ID_MSG_STRT
+ 2),
2525 (MPM_OP
+ AMSG_OUT
+
2526 (((unsigned char)(currSCCB
->
2529 >> 6) | (unsigned char)0x20)));
2531 for (i
= 1; i
< QUEUE_DEPTH
; i
++) {
2532 if (++lastTag
>= QUEUE_DEPTH
)
2534 if (CurrCard
->discQ_Tbl
[lastTag
] ==
2538 (MPM_OP
+ AMSG_OUT
+
2540 CurrCard
->tagQ_Lst
= lastTag
;
2541 currSCCB
->Sccb_tag
= lastTag
;
2542 CurrCard
->discQ_Tbl
[lastTag
] =
2544 CurrCard
->discQCount
++;
2549 if (i
== QUEUE_DEPTH
) {
2550 currTar_Info
->TarLUNBusy
[lun
] = 1;
2551 FPT_queueSelectFail(CurrCard
, p_card
);
2556 currSCCB
->Sccb_scsistat
= SELECT_Q_ST
;
2558 WR_HARPOON(port
+ hp_autostart_3
,
2559 (SELECT
+ SELCHK_STRT
));
2565 WRW_HARPOON((port
+ ID_MSG_STRT
),
2566 BRH_OP
+ ALWAYS
+ NTCMD
);
2568 WRW_HARPOON((port
+ NON_TAG_ID_MSG
),
2569 (MPM_OP
+ AMSG_OUT
+ currSCCB
->Sccb_idmsg
));
2571 currSCCB
->Sccb_scsistat
= SELECT_ST
;
2573 WR_HARPOON(port
+ hp_autostart_3
,
2574 (SELECT
+ SELCHK_STRT
));
2577 theCCB
= (unsigned char *)&currSCCB
->Cdb
[0];
2579 cdb_reg
= port
+ CMD_STRT
;
2581 for (i
= 0; i
< currSCCB
->CdbLength
; i
++) {
2582 WRW_HARPOON(cdb_reg
, (MPM_OP
+ ACOMMAND
+ *theCCB
));
2587 if (currSCCB
->CdbLength
!= TWELVE_BYTE_CMD
)
2588 WRW_HARPOON(cdb_reg
, (BRH_OP
+ ALWAYS
+ NP
));
2592 WRW_HARPOON((port
+ hp_fiforead
), (unsigned short)0x00);
2593 WR_HARPOON(port
+ hp_xferstat
, 0x00);
2595 WRW_HARPOON((port
+ hp_intstat
), (PROG_HLT
| TIMEOUT
| SEL
| BUS_FREE
));
2597 WR_HARPOON(port
+ hp_portctrl_0
, (SCSI_PORT
));
2599 if (!(currSCCB
->Sccb_MGRFlags
& F_DEV_SELECTED
)) {
2600 WR_HARPOON(port
+ hp_scsictrl_0
,
2601 (SEL_TAR
| ENA_ATN
| ENA_RESEL
| ENA_SCAM_SEL
));
2604 /* auto_loaded = (RD_HARPOON(port+hp_autostart_3) & (unsigned char)0x1F);
2605 auto_loaded |= AUTO_IMMED; */
2606 auto_loaded
= AUTO_IMMED
;
2610 WR_HARPOON(port
+ hp_autostart_3
, auto_loaded
);
2616 /*---------------------------------------------------------------------
2618 * Function: FPT_sres
2620 * Description: Hookup the correct CCB and handle the incoming messages.
2622 *---------------------------------------------------------------------*/
2624 static void FPT_sres(unsigned long port
, unsigned char p_card
,
2625 struct sccb_card
*pCurrCard
)
2628 unsigned char our_target
, message
, lun
= 0, tag
, msgRetryCount
;
2630 struct sccb_mgr_tar_info
*currTar_Info
;
2631 struct sccb
*currSCCB
;
2633 if (pCurrCard
->currentSCCB
!= NULL
) {
2635 &FPT_sccbMgrTbl
[p_card
][pCurrCard
->currentSCCB
->TargID
];
2638 WR_HARPOON((port
+ hp_scsictrl_0
), (ENA_RESEL
| ENA_SCAM_SEL
));
2640 currSCCB
= pCurrCard
->currentSCCB
;
2641 if (currSCCB
->Sccb_scsistat
== SELECT_WN_ST
) {
2642 currTar_Info
->TarStatus
&= ~TAR_WIDE_MASK
;
2643 currSCCB
->Sccb_scsistat
= BUS_FREE_ST
;
2645 if (currSCCB
->Sccb_scsistat
== SELECT_SN_ST
) {
2646 currTar_Info
->TarStatus
&= ~TAR_SYNC_MASK
;
2647 currSCCB
->Sccb_scsistat
= BUS_FREE_ST
;
2649 if (((pCurrCard
->globalFlags
& F_CONLUN_IO
) &&
2650 ((currTar_Info
->TarStatus
& TAR_TAG_Q_MASK
) !=
2652 currTar_Info
->TarLUNBusy
[currSCCB
->Lun
] = 0;
2653 if (currSCCB
->Sccb_scsistat
!= ABORT_ST
) {
2654 pCurrCard
->discQCount
--;
2655 pCurrCard
->discQ_Tbl
[currTar_Info
->
2656 LunDiscQ_Idx
[currSCCB
->
2661 currTar_Info
->TarLUNBusy
[0] = 0;
2662 if (currSCCB
->Sccb_tag
) {
2663 if (currSCCB
->Sccb_scsistat
!= ABORT_ST
) {
2664 pCurrCard
->discQCount
--;
2665 pCurrCard
->discQ_Tbl
[currSCCB
->
2669 if (currSCCB
->Sccb_scsistat
!= ABORT_ST
) {
2670 pCurrCard
->discQCount
--;
2671 pCurrCard
->discQ_Tbl
[currTar_Info
->
2678 FPT_queueSelectFail(&FPT_BL_Card
[p_card
], p_card
);
2681 WRW_HARPOON((port
+ hp_fiforead
), (unsigned short)0x00);
2683 our_target
= (unsigned char)(RD_HARPOON(port
+ hp_select_id
) >> 4);
2684 currTar_Info
= &FPT_sccbMgrTbl
[p_card
][our_target
];
2689 currTar_Info
= &FPT_sccbMgrTbl
[p_card
][our_target
];
2692 while (!(RD_HARPOON(port
+ hp_scsisig
) & SCSI_REQ
)) {
2693 if (!(RD_HARPOON(port
+ hp_scsisig
) & SCSI_BSY
)) {
2695 WRW_HARPOON((port
+ hp_intstat
), PHASE
);
2700 WRW_HARPOON((port
+ hp_intstat
), PHASE
);
2701 if ((RD_HARPOON(port
+ hp_scsisig
) & S_SCSI_PHZ
) == S_MSGI_PH
) {
2703 message
= FPT_sfm(port
, pCurrCard
->currentSCCB
);
2706 if (message
<= (0x80 | LUN_MASK
)) {
2707 lun
= message
& (unsigned char)LUN_MASK
;
2710 TarStatus
& TAR_TAG_Q_MASK
) ==
2712 if (currTar_Info
->TarTagQ_Cnt
!=
2718 ACCEPT_MSG(port
); /*Release the ACK for ID msg. */
2754 /*End Tag cmds supported! */
2756 /*End valid ID message. */
2759 ACCEPT_MSG_ATN(port
);
2763 /* End good id message. */
2769 ACCEPT_MSG_ATN(port
);
2772 (RDW_HARPOON((port
+ hp_intstat
)) &
2774 && !(RD_HARPOON(port
+ hp_scsisig
) & SCSI_REQ
)
2775 && (RD_HARPOON(port
+ hp_scsisig
) & SCSI_BSY
)) ;
2782 if (msgRetryCount
== 1) {
2783 FPT_SendMsg(port
, SMPARITY
);
2785 FPT_SendMsg(port
, SMDEV_RESET
);
2787 FPT_sssyncv(port
, our_target
, NARROW_SCSI
,
2790 if (FPT_sccbMgrTbl
[p_card
][our_target
].
2791 TarEEValue
& EE_SYNC_MASK
) {
2793 FPT_sccbMgrTbl
[p_card
][our_target
].
2794 TarStatus
&= ~TAR_SYNC_MASK
;
2798 if (FPT_sccbMgrTbl
[p_card
][our_target
].
2799 TarEEValue
& EE_WIDE_SCSI
) {
2801 FPT_sccbMgrTbl
[p_card
][our_target
].
2802 TarStatus
&= ~TAR_WIDE_MASK
;
2805 FPT_queueFlushTargSccb(p_card
, our_target
,
2807 FPT_SccbMgrTableInitTarget(p_card
, our_target
);
2811 } while (message
== 0);
2813 if (((pCurrCard
->globalFlags
& F_CONLUN_IO
) &&
2814 ((currTar_Info
->TarStatus
& TAR_TAG_Q_MASK
) != TAG_Q_TRYING
))) {
2815 currTar_Info
->TarLUNBusy
[lun
] = 1;
2816 pCurrCard
->currentSCCB
=
2817 pCurrCard
->discQ_Tbl
[currTar_Info
->LunDiscQ_Idx
[lun
]];
2818 if (pCurrCard
->currentSCCB
!= NULL
) {
2821 ACCEPT_MSG_ATN(port
);
2824 currTar_Info
->TarLUNBusy
[0] = 1;
2827 if (pCurrCard
->discQ_Tbl
[tag
] != NULL
) {
2828 pCurrCard
->currentSCCB
=
2829 pCurrCard
->discQ_Tbl
[tag
];
2830 currTar_Info
->TarTagQ_Cnt
--;
2833 ACCEPT_MSG_ATN(port
);
2836 pCurrCard
->currentSCCB
=
2837 pCurrCard
->discQ_Tbl
[currTar_Info
->LunDiscQ_Idx
[0]];
2838 if (pCurrCard
->currentSCCB
!= NULL
) {
2841 ACCEPT_MSG_ATN(port
);
2846 if (pCurrCard
->currentSCCB
!= NULL
) {
2847 if (pCurrCard
->currentSCCB
->Sccb_scsistat
== ABORT_ST
) {
2848 /* During Abort Tag command, the target could have got re-selected
2849 and completed the command. Check the select Q and remove the CCB
2850 if it is in the Select Q */
2851 FPT_queueFindSccb(pCurrCard
->currentSCCB
, p_card
);
2855 while (!(RDW_HARPOON((port
+ hp_intstat
)) & (PHASE
| RESET
)) &&
2856 !(RD_HARPOON(port
+ hp_scsisig
) & SCSI_REQ
) &&
2857 (RD_HARPOON(port
+ hp_scsisig
) & SCSI_BSY
)) ;
2860 static void FPT_SendMsg(unsigned long port
, unsigned char message
)
2862 while (!(RD_HARPOON(port
+ hp_scsisig
) & SCSI_REQ
)) {
2863 if (!(RD_HARPOON(port
+ hp_scsisig
) & SCSI_BSY
)) {
2865 WRW_HARPOON((port
+ hp_intstat
), PHASE
);
2870 WRW_HARPOON((port
+ hp_intstat
), PHASE
);
2871 if ((RD_HARPOON(port
+ hp_scsisig
) & S_SCSI_PHZ
) == S_MSGO_PH
) {
2872 WRW_HARPOON((port
+ hp_intstat
),
2873 (BUS_FREE
| PHASE
| XFER_CNT_0
));
2875 WR_HARPOON(port
+ hp_portctrl_0
, SCSI_BUS_EN
);
2877 WR_HARPOON(port
+ hp_scsidata_0
, message
);
2879 WR_HARPOON(port
+ hp_scsisig
, (SCSI_ACK
+ S_ILL_PH
));
2883 WR_HARPOON(port
+ hp_portctrl_0
, 0x00);
2885 if ((message
== SMABORT
) || (message
== SMDEV_RESET
) ||
2886 (message
== SMABORT_TAG
)) {
2888 (RDW_HARPOON((port
+ hp_intstat
)) &
2889 (BUS_FREE
| PHASE
))) {
2892 if (RDW_HARPOON((port
+ hp_intstat
)) & BUS_FREE
) {
2893 WRW_HARPOON((port
+ hp_intstat
), BUS_FREE
);
2899 /*---------------------------------------------------------------------
2901 * Function: FPT_sdecm
2903 * Description: Determine the proper responce to the message from the
2906 *---------------------------------------------------------------------*/
2907 static void FPT_sdecm(unsigned char message
, unsigned long port
,
2908 unsigned char p_card
)
2910 struct sccb
*currSCCB
;
2911 struct sccb_card
*CurrCard
;
2912 struct sccb_mgr_tar_info
*currTar_Info
;
2914 CurrCard
= &FPT_BL_Card
[p_card
];
2915 currSCCB
= CurrCard
->currentSCCB
;
2917 currTar_Info
= &FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
];
2919 if (message
== SMREST_DATA_PTR
) {
2920 if (!(currSCCB
->Sccb_XferState
& F_NO_DATA_YET
)) {
2921 currSCCB
->Sccb_ATC
= currSCCB
->Sccb_savedATC
;
2923 FPT_hostDataXferRestart(currSCCB
);
2927 WR_HARPOON(port
+ hp_autostart_1
,
2928 (AUTO_IMMED
+ DISCONNECT_START
));
2931 else if (message
== SMCMD_COMP
) {
2933 if (currSCCB
->Sccb_scsistat
== SELECT_Q_ST
) {
2934 currTar_Info
->TarStatus
&=
2935 ~(unsigned char)TAR_TAG_Q_MASK
;
2936 currTar_Info
->TarStatus
|= (unsigned char)TAG_Q_REJECT
;
2943 else if ((message
== SMNO_OP
) || (message
>= SMIDENT
)
2944 || (message
== SMINIT_RECOVERY
) || (message
== SMREL_RECOVERY
)) {
2947 WR_HARPOON(port
+ hp_autostart_1
,
2948 (AUTO_IMMED
+ DISCONNECT_START
));
2951 else if (message
== SMREJECT
) {
2953 if ((currSCCB
->Sccb_scsistat
== SELECT_SN_ST
) ||
2954 (currSCCB
->Sccb_scsistat
== SELECT_WN_ST
) ||
2955 ((currTar_Info
->TarStatus
& TAR_SYNC_MASK
) == SYNC_TRYING
)
2956 || ((currTar_Info
->TarStatus
& TAR_TAG_Q_MASK
) ==
2959 WRW_HARPOON((port
+ hp_intstat
), BUS_FREE
);
2963 while ((!(RD_HARPOON(port
+ hp_scsisig
) & SCSI_REQ
)) &&
2964 (!(RDW_HARPOON((port
+ hp_intstat
)) & BUS_FREE
)))
2968 if (currSCCB
->Lun
== 0x00) {
2969 if ((currSCCB
->Sccb_scsistat
== SELECT_SN_ST
)) {
2971 currTar_Info
->TarStatus
|=
2972 (unsigned char)SYNC_SUPPORTED
;
2974 currTar_Info
->TarEEValue
&=
2978 else if ((currSCCB
->Sccb_scsistat
==
2981 currTar_Info
->TarStatus
=
2983 TarStatus
& ~WIDE_ENABLED
) |
2986 currTar_Info
->TarEEValue
&=
2991 else if ((currTar_Info
->
2992 TarStatus
& TAR_TAG_Q_MASK
) ==
2994 currTar_Info
->TarStatus
=
2996 TarStatus
& ~(unsigned char)
2997 TAR_TAG_Q_MASK
) | TAG_Q_REJECT
;
2999 currSCCB
->ControlByte
&= ~F_USE_CMD_Q
;
3000 CurrCard
->discQCount
--;
3001 CurrCard
->discQ_Tbl
[currSCCB
->
3003 currSCCB
->Sccb_tag
= 0x00;
3008 if (RDW_HARPOON((port
+ hp_intstat
)) & BUS_FREE
) {
3010 if (currSCCB
->Lun
== 0x00) {
3011 WRW_HARPOON((port
+ hp_intstat
),
3013 CurrCard
->globalFlags
|= F_NEW_SCCB_CMD
;
3019 if ((CurrCard
->globalFlags
& F_CONLUN_IO
) &&
3021 TarStatus
& TAR_TAG_Q_MASK
) !=
3023 currTar_Info
->TarLUNBusy
[currSCCB
->
3026 currTar_Info
->TarLUNBusy
[0] = 1;
3028 currSCCB
->ControlByte
&=
3029 ~(unsigned char)F_USE_CMD_Q
;
3031 WR_HARPOON(port
+ hp_autostart_1
,
3032 (AUTO_IMMED
+ DISCONNECT_START
));
3040 while ((!(RD_HARPOON(port
+ hp_scsisig
) & SCSI_REQ
)) &&
3041 (!(RDW_HARPOON((port
+ hp_intstat
)) & BUS_FREE
)))
3045 if (!(RDW_HARPOON((port
+ hp_intstat
)) & BUS_FREE
)) {
3046 WR_HARPOON(port
+ hp_autostart_1
,
3047 (AUTO_IMMED
+ DISCONNECT_START
));
3052 else if (message
== SMEXT
) {
3055 FPT_shandem(port
, p_card
, currSCCB
);
3058 else if (message
== SMIGNORWR
) {
3060 ACCEPT_MSG(port
); /* ACK the RESIDUE MSG */
3062 message
= FPT_sfm(port
, currSCCB
);
3064 if (currSCCB
->Sccb_scsimsg
!= SMPARITY
)
3066 WR_HARPOON(port
+ hp_autostart_1
,
3067 (AUTO_IMMED
+ DISCONNECT_START
));
3072 currSCCB
->HostStatus
= SCCB_PHASE_SEQUENCE_FAIL
;
3073 currSCCB
->Sccb_scsimsg
= SMREJECT
;
3075 ACCEPT_MSG_ATN(port
);
3076 WR_HARPOON(port
+ hp_autostart_1
,
3077 (AUTO_IMMED
+ DISCONNECT_START
));
3081 /*---------------------------------------------------------------------
3083 * Function: FPT_shandem
3085 * Description: Decide what to do with the extended message.
3087 *---------------------------------------------------------------------*/
3088 static void FPT_shandem(unsigned long port
, unsigned char p_card
,
3089 struct sccb
*pCurrSCCB
)
3091 unsigned char length
, message
;
3093 length
= FPT_sfm(port
, pCurrSCCB
);
3097 message
= FPT_sfm(port
, pCurrSCCB
);
3100 if (message
== SMSYNC
) {
3102 if (length
== 0x03) {
3105 FPT_stsyncn(port
, p_card
);
3108 pCurrSCCB
->Sccb_scsimsg
= SMREJECT
;
3109 ACCEPT_MSG_ATN(port
);
3111 } else if (message
== SMWDTR
) {
3113 if (length
== 0x02) {
3116 FPT_stwidn(port
, p_card
);
3119 pCurrSCCB
->Sccb_scsimsg
= SMREJECT
;
3120 ACCEPT_MSG_ATN(port
);
3122 WR_HARPOON(port
+ hp_autostart_1
,
3128 pCurrSCCB
->Sccb_scsimsg
= SMREJECT
;
3129 ACCEPT_MSG_ATN(port
);
3131 WR_HARPOON(port
+ hp_autostart_1
,
3132 (AUTO_IMMED
+ DISCONNECT_START
));
3135 if (pCurrSCCB
->Sccb_scsimsg
!= SMPARITY
)
3137 WR_HARPOON(port
+ hp_autostart_1
,
3138 (AUTO_IMMED
+ DISCONNECT_START
));
3141 if (pCurrSCCB
->Sccb_scsimsg
== SMPARITY
)
3142 WR_HARPOON(port
+ hp_autostart_1
,
3143 (AUTO_IMMED
+ DISCONNECT_START
));
3147 /*---------------------------------------------------------------------
3149 * Function: FPT_sisyncn
3151 * Description: Read in a message byte from the SCSI bus, and check
3152 * for a parity error.
3154 *---------------------------------------------------------------------*/
3156 static unsigned char FPT_sisyncn(unsigned long port
, unsigned char p_card
,
3157 unsigned char syncFlag
)
3159 struct sccb
*currSCCB
;
3160 struct sccb_mgr_tar_info
*currTar_Info
;
3162 currSCCB
= FPT_BL_Card
[p_card
].currentSCCB
;
3163 currTar_Info
= &FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
];
3165 if (!((currTar_Info
->TarStatus
& TAR_SYNC_MASK
) == SYNC_TRYING
)) {
3167 WRW_HARPOON((port
+ ID_MSG_STRT
),
3168 (MPM_OP
+ AMSG_OUT
+
3170 Sccb_idmsg
& ~(unsigned char)DISC_PRIV
)));
3172 WRW_HARPOON((port
+ ID_MSG_STRT
+ 2), BRH_OP
+ ALWAYS
+ CMDPZ
);
3174 WRW_HARPOON((port
+ SYNC_MSGS
+ 0),
3175 (MPM_OP
+ AMSG_OUT
+ SMEXT
));
3176 WRW_HARPOON((port
+ SYNC_MSGS
+ 2), (MPM_OP
+ AMSG_OUT
+ 0x03));
3177 WRW_HARPOON((port
+ SYNC_MSGS
+ 4),
3178 (MPM_OP
+ AMSG_OUT
+ SMSYNC
));
3180 if ((currTar_Info
->TarEEValue
& EE_SYNC_MASK
) == EE_SYNC_20MB
)
3182 WRW_HARPOON((port
+ SYNC_MSGS
+ 6),
3183 (MPM_OP
+ AMSG_OUT
+ 12));
3185 else if ((currTar_Info
->TarEEValue
& EE_SYNC_MASK
) ==
3188 WRW_HARPOON((port
+ SYNC_MSGS
+ 6),
3189 (MPM_OP
+ AMSG_OUT
+ 25));
3191 else if ((currTar_Info
->TarEEValue
& EE_SYNC_MASK
) ==
3194 WRW_HARPOON((port
+ SYNC_MSGS
+ 6),
3195 (MPM_OP
+ AMSG_OUT
+ 50));
3198 WRW_HARPOON((port
+ SYNC_MSGS
+ 6),
3199 (MPM_OP
+ AMSG_OUT
+ 00));
3201 WRW_HARPOON((port
+ SYNC_MSGS
+ 8), (RAT_OP
));
3202 WRW_HARPOON((port
+ SYNC_MSGS
+ 10),
3203 (MPM_OP
+ AMSG_OUT
+ DEFAULT_OFFSET
));
3204 WRW_HARPOON((port
+ SYNC_MSGS
+ 12), (BRH_OP
+ ALWAYS
+ NP
));
3206 if (syncFlag
== 0) {
3207 WR_HARPOON(port
+ hp_autostart_3
,
3208 (SELECT
+ SELCHK_STRT
));
3209 currTar_Info
->TarStatus
=
3211 TarStatus
& ~(unsigned char)TAR_SYNC_MASK
) |
3212 (unsigned char)SYNC_TRYING
);
3214 WR_HARPOON(port
+ hp_autostart_3
,
3215 (AUTO_IMMED
+ CMD_ONLY_STRT
));
3223 currTar_Info
->TarStatus
|= (unsigned char)SYNC_SUPPORTED
;
3224 currTar_Info
->TarEEValue
&= ~EE_SYNC_MASK
;
3229 /*---------------------------------------------------------------------
3231 * Function: FPT_stsyncn
3233 * Description: The has sent us a Sync Nego message so handle it as
3236 *---------------------------------------------------------------------*/
3237 static void FPT_stsyncn(unsigned long port
, unsigned char p_card
)
3239 unsigned char sync_msg
, offset
, sync_reg
, our_sync_msg
;
3240 struct sccb
*currSCCB
;
3241 struct sccb_mgr_tar_info
*currTar_Info
;
3243 currSCCB
= FPT_BL_Card
[p_card
].currentSCCB
;
3244 currTar_Info
= &FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
];
3246 sync_msg
= FPT_sfm(port
, currSCCB
);
3248 if ((sync_msg
== 0x00) && (currSCCB
->Sccb_scsimsg
== SMPARITY
)) {
3249 WR_HARPOON(port
+ hp_autostart_1
,
3250 (AUTO_IMMED
+ DISCONNECT_START
));
3256 offset
= FPT_sfm(port
, currSCCB
);
3258 if ((offset
== 0x00) && (currSCCB
->Sccb_scsimsg
== SMPARITY
)) {
3259 WR_HARPOON(port
+ hp_autostart_1
,
3260 (AUTO_IMMED
+ DISCONNECT_START
));
3264 if ((currTar_Info
->TarEEValue
& EE_SYNC_MASK
) == EE_SYNC_20MB
)
3266 our_sync_msg
= 12; /* Setup our Message to 20mb/s */
3268 else if ((currTar_Info
->TarEEValue
& EE_SYNC_MASK
) == EE_SYNC_10MB
)
3270 our_sync_msg
= 25; /* Setup our Message to 10mb/s */
3272 else if ((currTar_Info
->TarEEValue
& EE_SYNC_MASK
) == EE_SYNC_5MB
)
3274 our_sync_msg
= 50; /* Setup our Message to 5mb/s */
3277 our_sync_msg
= 0; /* Message = Async */
3279 if (sync_msg
< our_sync_msg
) {
3280 sync_msg
= our_sync_msg
; /*if faster, then set to max. */
3283 if (offset
== ASYNC
)
3286 if (offset
> MAX_OFFSET
)
3287 offset
= MAX_OFFSET
;
3293 sync_reg
= 0x20; /* Use 10MB/s */
3297 sync_reg
= 0x40; /* Use 6.6MB/s */
3301 sync_reg
= 0x60; /* Use 5MB/s */
3305 sync_reg
= 0x80; /* Use 4MB/s */
3309 sync_reg
= 0xA0; /* Use 3.33MB/s */
3313 sync_reg
= 0xC0; /* Use 2.85MB/s */
3317 sync_reg
= 0xE0; /* Use 2.5MB/s */
3319 if (sync_msg
> 100) {
3321 sync_reg
= 0x00; /* Use ASYNC */
3325 if (currTar_Info
->TarStatus
& WIDE_ENABLED
)
3331 sync_reg
|= (offset
| NARROW_SCSI
);
3333 FPT_sssyncv(port
, currSCCB
->TargID
, sync_reg
, currTar_Info
);
3335 if (currSCCB
->Sccb_scsistat
== SELECT_SN_ST
) {
3339 currTar_Info
->TarStatus
= ((currTar_Info
->TarStatus
&
3340 ~(unsigned char)TAR_SYNC_MASK
) |
3341 (unsigned char)SYNC_SUPPORTED
);
3343 WR_HARPOON(port
+ hp_autostart_1
,
3344 (AUTO_IMMED
+ DISCONNECT_START
));
3349 ACCEPT_MSG_ATN(port
);
3351 FPT_sisyncr(port
, sync_msg
, offset
);
3353 currTar_Info
->TarStatus
= ((currTar_Info
->TarStatus
&
3354 ~(unsigned char)TAR_SYNC_MASK
) |
3355 (unsigned char)SYNC_SUPPORTED
);
3359 /*---------------------------------------------------------------------
3361 * Function: FPT_sisyncr
3363 * Description: Answer the targets sync message.
3365 *---------------------------------------------------------------------*/
3366 static void FPT_sisyncr(unsigned long port
, unsigned char sync_pulse
,
3367 unsigned char offset
)
3370 WRW_HARPOON((port
+ SYNC_MSGS
+ 0), (MPM_OP
+ AMSG_OUT
+ SMEXT
));
3371 WRW_HARPOON((port
+ SYNC_MSGS
+ 2), (MPM_OP
+ AMSG_OUT
+ 0x03));
3372 WRW_HARPOON((port
+ SYNC_MSGS
+ 4), (MPM_OP
+ AMSG_OUT
+ SMSYNC
));
3373 WRW_HARPOON((port
+ SYNC_MSGS
+ 6), (MPM_OP
+ AMSG_OUT
+ sync_pulse
));
3374 WRW_HARPOON((port
+ SYNC_MSGS
+ 8), (RAT_OP
));
3375 WRW_HARPOON((port
+ SYNC_MSGS
+ 10), (MPM_OP
+ AMSG_OUT
+ offset
));
3376 WRW_HARPOON((port
+ SYNC_MSGS
+ 12), (BRH_OP
+ ALWAYS
+ NP
));
3379 WR_HARPOON(port
+ hp_portctrl_0
, SCSI_PORT
);
3380 WRW_HARPOON((port
+ hp_intstat
), CLR_ALL_INT_1
);
3382 WR_HARPOON(port
+ hp_autostart_3
, (AUTO_IMMED
+ CMD_ONLY_STRT
));
3384 while (!(RDW_HARPOON((port
+ hp_intstat
)) & (BUS_FREE
| AUTO_INT
))) {
3388 /*---------------------------------------------------------------------
3390 * Function: FPT_siwidn
3392 * Description: Read in a message byte from the SCSI bus, and check
3393 * for a parity error.
3395 *---------------------------------------------------------------------*/
3397 static unsigned char FPT_siwidn(unsigned long port
, unsigned char p_card
)
3399 struct sccb
*currSCCB
;
3400 struct sccb_mgr_tar_info
*currTar_Info
;
3402 currSCCB
= FPT_BL_Card
[p_card
].currentSCCB
;
3403 currTar_Info
= &FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
];
3405 if (!((currTar_Info
->TarStatus
& TAR_WIDE_MASK
) == WIDE_NEGOCIATED
)) {
3407 WRW_HARPOON((port
+ ID_MSG_STRT
),
3408 (MPM_OP
+ AMSG_OUT
+
3410 Sccb_idmsg
& ~(unsigned char)DISC_PRIV
)));
3412 WRW_HARPOON((port
+ ID_MSG_STRT
+ 2), BRH_OP
+ ALWAYS
+ CMDPZ
);
3414 WRW_HARPOON((port
+ SYNC_MSGS
+ 0),
3415 (MPM_OP
+ AMSG_OUT
+ SMEXT
));
3416 WRW_HARPOON((port
+ SYNC_MSGS
+ 2), (MPM_OP
+ AMSG_OUT
+ 0x02));
3417 WRW_HARPOON((port
+ SYNC_MSGS
+ 4),
3418 (MPM_OP
+ AMSG_OUT
+ SMWDTR
));
3419 WRW_HARPOON((port
+ SYNC_MSGS
+ 6), (RAT_OP
));
3420 WRW_HARPOON((port
+ SYNC_MSGS
+ 8),
3421 (MPM_OP
+ AMSG_OUT
+ SM16BIT
));
3422 WRW_HARPOON((port
+ SYNC_MSGS
+ 10), (BRH_OP
+ ALWAYS
+ NP
));
3424 WR_HARPOON(port
+ hp_autostart_3
, (SELECT
+ SELCHK_STRT
));
3426 currTar_Info
->TarStatus
= ((currTar_Info
->TarStatus
&
3427 ~(unsigned char)TAR_WIDE_MASK
) |
3428 (unsigned char)WIDE_ENABLED
);
3435 currTar_Info
->TarStatus
= ((currTar_Info
->TarStatus
&
3436 ~(unsigned char)TAR_WIDE_MASK
) |
3439 currTar_Info
->TarEEValue
&= ~EE_WIDE_SCSI
;
3444 /*---------------------------------------------------------------------
3446 * Function: FPT_stwidn
3448 * Description: The has sent us a Wide Nego message so handle it as
3451 *---------------------------------------------------------------------*/
3452 static void FPT_stwidn(unsigned long port
, unsigned char p_card
)
3454 unsigned char width
;
3455 struct sccb
*currSCCB
;
3456 struct sccb_mgr_tar_info
*currTar_Info
;
3458 currSCCB
= FPT_BL_Card
[p_card
].currentSCCB
;
3459 currTar_Info
= &FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
];
3461 width
= FPT_sfm(port
, currSCCB
);
3463 if ((width
== 0x00) && (currSCCB
->Sccb_scsimsg
== SMPARITY
)) {
3464 WR_HARPOON(port
+ hp_autostart_1
,
3465 (AUTO_IMMED
+ DISCONNECT_START
));
3469 if (!(currTar_Info
->TarEEValue
& EE_WIDE_SCSI
))
3473 currTar_Info
->TarStatus
|= WIDE_ENABLED
;
3476 width
= NARROW_SCSI
;
3477 currTar_Info
->TarStatus
&= ~WIDE_ENABLED
;
3480 FPT_sssyncv(port
, currSCCB
->TargID
, width
, currTar_Info
);
3482 if (currSCCB
->Sccb_scsistat
== SELECT_WN_ST
) {
3484 currTar_Info
->TarStatus
|= WIDE_NEGOCIATED
;
3487 ((currTar_Info
->TarStatus
& TAR_SYNC_MASK
) ==
3489 ACCEPT_MSG_ATN(port
);
3491 FPT_sisyncn(port
, p_card
, 1);
3492 currSCCB
->Sccb_scsistat
= SELECT_SN_ST
;
3496 WR_HARPOON(port
+ hp_autostart_1
,
3497 (AUTO_IMMED
+ DISCONNECT_START
));
3503 ACCEPT_MSG_ATN(port
);
3505 if (currTar_Info
->TarEEValue
& EE_WIDE_SCSI
)
3510 FPT_siwidr(port
, width
);
3512 currTar_Info
->TarStatus
|= (WIDE_NEGOCIATED
| WIDE_ENABLED
);
3516 /*---------------------------------------------------------------------
3518 * Function: FPT_siwidr
3520 * Description: Answer the targets Wide nego message.
3522 *---------------------------------------------------------------------*/
3523 static void FPT_siwidr(unsigned long port
, unsigned char width
)
3526 WRW_HARPOON((port
+ SYNC_MSGS
+ 0), (MPM_OP
+ AMSG_OUT
+ SMEXT
));
3527 WRW_HARPOON((port
+ SYNC_MSGS
+ 2), (MPM_OP
+ AMSG_OUT
+ 0x02));
3528 WRW_HARPOON((port
+ SYNC_MSGS
+ 4), (MPM_OP
+ AMSG_OUT
+ SMWDTR
));
3529 WRW_HARPOON((port
+ SYNC_MSGS
+ 6), (RAT_OP
));
3530 WRW_HARPOON((port
+ SYNC_MSGS
+ 8), (MPM_OP
+ AMSG_OUT
+ width
));
3531 WRW_HARPOON((port
+ SYNC_MSGS
+ 10), (BRH_OP
+ ALWAYS
+ NP
));
3534 WR_HARPOON(port
+ hp_portctrl_0
, SCSI_PORT
);
3535 WRW_HARPOON((port
+ hp_intstat
), CLR_ALL_INT_1
);
3537 WR_HARPOON(port
+ hp_autostart_3
, (AUTO_IMMED
+ CMD_ONLY_STRT
));
3539 while (!(RDW_HARPOON((port
+ hp_intstat
)) & (BUS_FREE
| AUTO_INT
))) {
3543 /*---------------------------------------------------------------------
3545 * Function: FPT_sssyncv
3547 * Description: Write the desired value to the Sync Register for the
3550 *---------------------------------------------------------------------*/
3551 static void FPT_sssyncv(unsigned long p_port
, unsigned char p_id
,
3552 unsigned char p_sync_value
,
3553 struct sccb_mgr_tar_info
*currTar_Info
)
3555 unsigned char index
;
3562 index
= 12; /* hp_synctarg_0 */
3565 index
= 13; /* hp_synctarg_1 */
3568 index
= 14; /* hp_synctarg_2 */
3571 index
= 15; /* hp_synctarg_3 */
3574 index
= 8; /* hp_synctarg_4 */
3577 index
= 9; /* hp_synctarg_5 */
3580 index
= 10; /* hp_synctarg_6 */
3583 index
= 11; /* hp_synctarg_7 */
3586 index
= 4; /* hp_synctarg_8 */
3589 index
= 5; /* hp_synctarg_9 */
3592 index
= 6; /* hp_synctarg_10 */
3595 index
= 7; /* hp_synctarg_11 */
3598 index
= 0; /* hp_synctarg_12 */
3601 index
= 1; /* hp_synctarg_13 */
3604 index
= 2; /* hp_synctarg_14 */
3607 index
= 3; /* hp_synctarg_15 */
3611 WR_HARPOON(p_port
+ hp_synctarg_base
+ index
, p_sync_value
);
3613 currTar_Info
->TarSyncCtrl
= p_sync_value
;
3616 /*---------------------------------------------------------------------
3618 * Function: FPT_sresb
3620 * Description: Reset the desired card's SCSI bus.
3622 *---------------------------------------------------------------------*/
3623 static void FPT_sresb(unsigned long port
, unsigned char p_card
)
3625 unsigned char scsiID
, i
;
3627 struct sccb_mgr_tar_info
*currTar_Info
;
3629 WR_HARPOON(port
+ hp_page_ctrl
,
3630 (RD_HARPOON(port
+ hp_page_ctrl
) | G_INT_DISABLE
));
3631 WRW_HARPOON((port
+ hp_intstat
), CLR_ALL_INT
);
3633 WR_HARPOON(port
+ hp_scsictrl_0
, SCSI_RST
);
3635 scsiID
= RD_HARPOON(port
+ hp_seltimeout
);
3636 WR_HARPOON(port
+ hp_seltimeout
, TO_5ms
);
3637 WRW_HARPOON((port
+ hp_intstat
), TIMEOUT
);
3639 WR_HARPOON(port
+ hp_portctrl_0
, (SCSI_PORT
| START_TO
));
3641 while (!(RDW_HARPOON((port
+ hp_intstat
)) & TIMEOUT
)) {
3644 WR_HARPOON(port
+ hp_seltimeout
, scsiID
);
3646 WR_HARPOON(port
+ hp_scsictrl_0
, ENA_SCAM_SEL
);
3648 FPT_Wait(port
, TO_5ms
);
3650 WRW_HARPOON((port
+ hp_intstat
), CLR_ALL_INT
);
3652 WR_HARPOON(port
+ hp_int_mask
, (RD_HARPOON(port
+ hp_int_mask
) | 0x00));
3654 for (scsiID
= 0; scsiID
< MAX_SCSI_TAR
; scsiID
++) {
3655 currTar_Info
= &FPT_sccbMgrTbl
[p_card
][scsiID
];
3657 if (currTar_Info
->TarEEValue
& EE_SYNC_MASK
) {
3658 currTar_Info
->TarSyncCtrl
= 0;
3659 currTar_Info
->TarStatus
&= ~TAR_SYNC_MASK
;
3662 if (currTar_Info
->TarEEValue
& EE_WIDE_SCSI
) {
3663 currTar_Info
->TarStatus
&= ~TAR_WIDE_MASK
;
3666 FPT_sssyncv(port
, scsiID
, NARROW_SCSI
, currTar_Info
);
3668 FPT_SccbMgrTableInitTarget(p_card
, scsiID
);
3671 FPT_BL_Card
[p_card
].scanIndex
= 0x00;
3672 FPT_BL_Card
[p_card
].currentSCCB
= NULL
;
3673 FPT_BL_Card
[p_card
].globalFlags
&= ~(F_TAG_STARTED
| F_HOST_XFER_ACT
3675 FPT_BL_Card
[p_card
].cmdCounter
= 0x00;
3676 FPT_BL_Card
[p_card
].discQCount
= 0x00;
3677 FPT_BL_Card
[p_card
].tagQ_Lst
= 0x01;
3679 for (i
= 0; i
< QUEUE_DEPTH
; i
++)
3680 FPT_BL_Card
[p_card
].discQ_Tbl
[i
] = NULL
;
3682 WR_HARPOON(port
+ hp_page_ctrl
,
3683 (RD_HARPOON(port
+ hp_page_ctrl
) & ~G_INT_DISABLE
));
3687 /*---------------------------------------------------------------------
3689 * Function: FPT_ssenss
3691 * Description: Setup for the Auto Sense command.
3693 *---------------------------------------------------------------------*/
3694 static void FPT_ssenss(struct sccb_card
*pCurrCard
)
3697 struct sccb
*currSCCB
;
3699 currSCCB
= pCurrCard
->currentSCCB
;
3701 currSCCB
->Save_CdbLen
= currSCCB
->CdbLength
;
3703 for (i
= 0; i
< 6; i
++) {
3705 currSCCB
->Save_Cdb
[i
] = currSCCB
->Cdb
[i
];
3708 currSCCB
->CdbLength
= SIX_BYTE_CMD
;
3709 currSCCB
->Cdb
[0] = SCSI_REQUEST_SENSE
;
3710 currSCCB
->Cdb
[1] = currSCCB
->Cdb
[1] & (unsigned char)0xE0; /*Keep LUN. */
3711 currSCCB
->Cdb
[2] = 0x00;
3712 currSCCB
->Cdb
[3] = 0x00;
3713 currSCCB
->Cdb
[4] = currSCCB
->RequestSenseLength
;
3714 currSCCB
->Cdb
[5] = 0x00;
3716 currSCCB
->Sccb_XferCnt
= (unsigned long)currSCCB
->RequestSenseLength
;
3718 currSCCB
->Sccb_ATC
= 0x00;
3720 currSCCB
->Sccb_XferState
|= F_AUTO_SENSE
;
3722 currSCCB
->Sccb_XferState
&= ~F_SG_XFER
;
3724 currSCCB
->Sccb_idmsg
= currSCCB
->Sccb_idmsg
& ~(unsigned char)DISC_PRIV
;
3726 currSCCB
->ControlByte
= 0x00;
3728 currSCCB
->Sccb_MGRFlags
&= F_STATUSLOADED
;
3731 /*---------------------------------------------------------------------
3733 * Function: FPT_sxfrp
3735 * Description: Transfer data into the bit bucket until the device
3736 * decides to switch phase.
3738 *---------------------------------------------------------------------*/
3740 static void FPT_sxfrp(unsigned long p_port
, unsigned char p_card
)
3742 unsigned char curr_phz
;
3744 DISABLE_AUTO(p_port
);
3746 if (FPT_BL_Card
[p_card
].globalFlags
& F_HOST_XFER_ACT
) {
3748 FPT_hostDataXferAbort(p_port
, p_card
,
3749 FPT_BL_Card
[p_card
].currentSCCB
);
3753 /* If the Automation handled the end of the transfer then do not
3754 match the phase or we will get out of sync with the ISR. */
3756 if (RDW_HARPOON((p_port
+ hp_intstat
)) &
3757 (BUS_FREE
| XFER_CNT_0
| AUTO_INT
))
3760 WR_HARPOON(p_port
+ hp_xfercnt_0
, 0x00);
3762 curr_phz
= RD_HARPOON(p_port
+ hp_scsisig
) & (unsigned char)S_SCSI_PHZ
;
3764 WRW_HARPOON((p_port
+ hp_intstat
), XFER_CNT_0
);
3766 WR_HARPOON(p_port
+ hp_scsisig
, curr_phz
);
3768 while (!(RDW_HARPOON((p_port
+ hp_intstat
)) & (BUS_FREE
| RESET
)) &&
3770 (RD_HARPOON(p_port
+ hp_scsisig
) & (unsigned char)S_SCSI_PHZ
)))
3772 if (curr_phz
& (unsigned char)SCSI_IOBIT
) {
3773 WR_HARPOON(p_port
+ hp_portctrl_0
,
3774 (SCSI_PORT
| HOST_PORT
| SCSI_INBIT
));
3776 if (!(RD_HARPOON(p_port
+ hp_xferstat
) & FIFO_EMPTY
)) {
3777 RD_HARPOON(p_port
+ hp_fifodata_0
);
3780 WR_HARPOON(p_port
+ hp_portctrl_0
,
3781 (SCSI_PORT
| HOST_PORT
| HOST_WRT
));
3782 if (RD_HARPOON(p_port
+ hp_xferstat
) & FIFO_EMPTY
) {
3783 WR_HARPOON(p_port
+ hp_fifodata_0
, 0xFA);
3786 } /* End of While loop for padding data I/O phase */
3788 while (!(RDW_HARPOON((p_port
+ hp_intstat
)) & (BUS_FREE
| RESET
))) {
3789 if (RD_HARPOON(p_port
+ hp_scsisig
) & SCSI_REQ
)
3793 WR_HARPOON(p_port
+ hp_portctrl_0
,
3794 (SCSI_PORT
| HOST_PORT
| SCSI_INBIT
));
3795 while (!(RD_HARPOON(p_port
+ hp_xferstat
) & FIFO_EMPTY
)) {
3796 RD_HARPOON(p_port
+ hp_fifodata_0
);
3799 if (!(RDW_HARPOON((p_port
+ hp_intstat
)) & (BUS_FREE
| RESET
))) {
3800 WR_HARPOON(p_port
+ hp_autostart_0
,
3801 (AUTO_IMMED
+ DISCONNECT_START
));
3802 while (!(RDW_HARPOON((p_port
+ hp_intstat
)) & AUTO_INT
)) {
3805 if (RDW_HARPOON((p_port
+ hp_intstat
)) &
3806 (ICMD_COMP
| ITAR_DISC
))
3808 (RDW_HARPOON((p_port
+ hp_intstat
)) &
3809 (BUS_FREE
| RSEL
))) ;
3813 /*---------------------------------------------------------------------
3815 * Function: FPT_schkdd
3817 * Description: Make sure data has been flushed from both FIFOs and abort
3818 * the operations if necessary.
3820 *---------------------------------------------------------------------*/
3822 static void FPT_schkdd(unsigned long port
, unsigned char p_card
)
3824 unsigned short TimeOutLoop
;
3825 unsigned char sPhase
;
3827 struct sccb
*currSCCB
;
3829 currSCCB
= FPT_BL_Card
[p_card
].currentSCCB
;
3831 if ((currSCCB
->Sccb_scsistat
!= DATA_OUT_ST
) &&
3832 (currSCCB
->Sccb_scsistat
!= DATA_IN_ST
)) {
3836 if (currSCCB
->Sccb_XferState
& F_ODD_BALL_CNT
) {
3838 currSCCB
->Sccb_ATC
+= (currSCCB
->Sccb_XferCnt
- 1);
3840 currSCCB
->Sccb_XferCnt
= 1;
3842 currSCCB
->Sccb_XferState
&= ~F_ODD_BALL_CNT
;
3843 WRW_HARPOON((port
+ hp_fiforead
), (unsigned short)0x00);
3844 WR_HARPOON(port
+ hp_xferstat
, 0x00);
3849 currSCCB
->Sccb_ATC
+= currSCCB
->Sccb_XferCnt
;
3851 currSCCB
->Sccb_XferCnt
= 0;
3854 if ((RDW_HARPOON((port
+ hp_intstat
)) & PARITY
) &&
3855 (currSCCB
->HostStatus
== SCCB_COMPLETE
)) {
3857 currSCCB
->HostStatus
= SCCB_PARITY_ERR
;
3858 WRW_HARPOON((port
+ hp_intstat
), PARITY
);
3861 FPT_hostDataXferAbort(port
, p_card
, currSCCB
);
3863 while (RD_HARPOON(port
+ hp_scsisig
) & SCSI_ACK
) {
3868 while (RD_HARPOON(port
+ hp_xferstat
) & FIFO_EMPTY
) {
3869 if (RDW_HARPOON((port
+ hp_intstat
)) & BUS_FREE
) {
3872 if (RD_HARPOON(port
+ hp_offsetctr
) & (unsigned char)0x1F) {
3875 if (RDW_HARPOON((port
+ hp_intstat
)) & RESET
) {
3878 if ((RD_HARPOON(port
+ hp_scsisig
) & SCSI_REQ
)
3879 || (TimeOutLoop
++ > 0x3000))
3883 sPhase
= RD_HARPOON(port
+ hp_scsisig
) & (SCSI_BSY
| S_SCSI_PHZ
);
3884 if ((!(RD_HARPOON(port
+ hp_xferstat
) & FIFO_EMPTY
)) ||
3885 (RD_HARPOON(port
+ hp_offsetctr
) & (unsigned char)0x1F) ||
3886 (sPhase
== (SCSI_BSY
| S_DATAO_PH
)) ||
3887 (sPhase
== (SCSI_BSY
| S_DATAI_PH
))) {
3889 WR_HARPOON(port
+ hp_portctrl_0
, SCSI_PORT
);
3891 if (!(currSCCB
->Sccb_XferState
& F_ALL_XFERRED
)) {
3892 if (currSCCB
->Sccb_XferState
& F_HOST_XFER_DIR
) {
3893 FPT_phaseDataIn(port
, p_card
);
3897 FPT_phaseDataOut(port
, p_card
);
3900 FPT_sxfrp(port
, p_card
);
3901 if (!(RDW_HARPOON((port
+ hp_intstat
)) &
3902 (BUS_FREE
| ICMD_COMP
| ITAR_DISC
| RESET
))) {
3903 WRW_HARPOON((port
+ hp_intstat
), AUTO_INT
);
3904 FPT_phaseDecode(port
, p_card
);
3911 WR_HARPOON(port
+ hp_portctrl_0
, 0x00);
3915 /*---------------------------------------------------------------------
3917 * Function: FPT_sinits
3919 * Description: Setup SCCB manager fields in this SCCB.
3921 *---------------------------------------------------------------------*/
3923 static void FPT_sinits(struct sccb
*p_sccb
, unsigned char p_card
)
3925 struct sccb_mgr_tar_info
*currTar_Info
;
3927 if ((p_sccb
->TargID
>= MAX_SCSI_TAR
) || (p_sccb
->Lun
>= MAX_LUN
)) {
3930 currTar_Info
= &FPT_sccbMgrTbl
[p_card
][p_sccb
->TargID
];
3932 p_sccb
->Sccb_XferState
= 0x00;
3933 p_sccb
->Sccb_XferCnt
= p_sccb
->DataLength
;
3935 if ((p_sccb
->OperationCode
== SCATTER_GATHER_COMMAND
) ||
3936 (p_sccb
->OperationCode
== RESIDUAL_SG_COMMAND
)) {
3938 p_sccb
->Sccb_SGoffset
= 0;
3939 p_sccb
->Sccb_XferState
= F_SG_XFER
;
3940 p_sccb
->Sccb_XferCnt
= 0x00;
3943 if (p_sccb
->DataLength
== 0x00)
3945 p_sccb
->Sccb_XferState
|= F_ALL_XFERRED
;
3947 if (p_sccb
->ControlByte
& F_USE_CMD_Q
) {
3948 if ((currTar_Info
->TarStatus
& TAR_TAG_Q_MASK
) == TAG_Q_REJECT
)
3949 p_sccb
->ControlByte
&= ~F_USE_CMD_Q
;
3952 currTar_Info
->TarStatus
|= TAG_Q_TRYING
;
3955 /* For !single SCSI device in system & device allow Disconnect
3956 or command is tag_q type then send Cmd with Disconnect Enable
3957 else send Cmd with Disconnect Disable */
3960 if (((!(FPT_BL_Card[p_card].globalFlags & F_SINGLE_DEVICE)) &&
3961 (currTar_Info->TarStatus & TAR_ALLOW_DISC)) ||
3962 (currTar_Info->TarStatus & TAG_Q_TRYING)) {
3964 if ((currTar_Info
->TarStatus
& TAR_ALLOW_DISC
) ||
3965 (currTar_Info
->TarStatus
& TAG_Q_TRYING
)) {
3966 p_sccb
->Sccb_idmsg
=
3967 (unsigned char)(SMIDENT
| DISC_PRIV
) | p_sccb
->Lun
;
3972 p_sccb
->Sccb_idmsg
= (unsigned char)SMIDENT
| p_sccb
->Lun
;
3975 p_sccb
->HostStatus
= 0x00;
3976 p_sccb
->TargetStatus
= 0x00;
3977 p_sccb
->Sccb_tag
= 0x00;
3978 p_sccb
->Sccb_MGRFlags
= 0x00;
3979 p_sccb
->Sccb_sgseg
= 0x00;
3980 p_sccb
->Sccb_ATC
= 0x00;
3981 p_sccb
->Sccb_savedATC
= 0x00;
3983 p_sccb->SccbVirtDataPtr = 0x00;
3984 p_sccb->Sccb_forwardlink = NULL;
3985 p_sccb->Sccb_backlink = NULL;
3987 p_sccb
->Sccb_scsistat
= BUS_FREE_ST
;
3988 p_sccb
->SccbStatus
= SCCB_IN_PROCESS
;
3989 p_sccb
->Sccb_scsimsg
= SMNO_OP
;
3993 /*---------------------------------------------------------------------
3995 * Function: Phase Decode
3997 * Description: Determine the phase and call the appropriate function.
3999 *---------------------------------------------------------------------*/
4001 static void FPT_phaseDecode(unsigned long p_port
, unsigned char p_card
)
4003 unsigned char phase_ref
;
4004 void (*phase
) (unsigned long, unsigned char);
4006 DISABLE_AUTO(p_port
);
4009 (unsigned char)(RD_HARPOON(p_port
+ hp_scsisig
) & S_SCSI_PHZ
);
4011 phase
= FPT_s_PhaseTbl
[phase_ref
];
4013 (*phase
) (p_port
, p_card
); /* Call the correct phase func */
4016 /*---------------------------------------------------------------------
4018 * Function: Data Out Phase
4020 * Description: Start up both the BusMaster and Xbow.
4022 *---------------------------------------------------------------------*/
4024 static void FPT_phaseDataOut(unsigned long port
, unsigned char p_card
)
4027 struct sccb
*currSCCB
;
4029 currSCCB
= FPT_BL_Card
[p_card
].currentSCCB
;
4030 if (currSCCB
== NULL
) {
4031 return; /* Exit if No SCCB record */
4034 currSCCB
->Sccb_scsistat
= DATA_OUT_ST
;
4035 currSCCB
->Sccb_XferState
&= ~(F_HOST_XFER_DIR
| F_NO_DATA_YET
);
4037 WR_HARPOON(port
+ hp_portctrl_0
, SCSI_PORT
);
4039 WRW_HARPOON((port
+ hp_intstat
), XFER_CNT_0
);
4041 WR_HARPOON(port
+ hp_autostart_0
, (END_DATA
+ END_DATA_START
));
4043 FPT_dataXferProcessor(port
, &FPT_BL_Card
[p_card
]);
4045 if (currSCCB
->Sccb_XferCnt
== 0) {
4047 if ((currSCCB
->ControlByte
& SCCB_DATA_XFER_OUT
) &&
4048 (currSCCB
->HostStatus
== SCCB_COMPLETE
))
4049 currSCCB
->HostStatus
= SCCB_DATA_OVER_RUN
;
4051 FPT_sxfrp(port
, p_card
);
4052 if (!(RDW_HARPOON((port
+ hp_intstat
)) & (BUS_FREE
| RESET
)))
4053 FPT_phaseDecode(port
, p_card
);
4057 /*---------------------------------------------------------------------
4059 * Function: Data In Phase
4061 * Description: Startup the BusMaster and the XBOW.
4063 *---------------------------------------------------------------------*/
4065 static void FPT_phaseDataIn(unsigned long port
, unsigned char p_card
)
4068 struct sccb
*currSCCB
;
4070 currSCCB
= FPT_BL_Card
[p_card
].currentSCCB
;
4072 if (currSCCB
== NULL
) {
4073 return; /* Exit if No SCCB record */
4076 currSCCB
->Sccb_scsistat
= DATA_IN_ST
;
4077 currSCCB
->Sccb_XferState
|= F_HOST_XFER_DIR
;
4078 currSCCB
->Sccb_XferState
&= ~F_NO_DATA_YET
;
4080 WR_HARPOON(port
+ hp_portctrl_0
, SCSI_PORT
);
4082 WRW_HARPOON((port
+ hp_intstat
), XFER_CNT_0
);
4084 WR_HARPOON(port
+ hp_autostart_0
, (END_DATA
+ END_DATA_START
));
4086 FPT_dataXferProcessor(port
, &FPT_BL_Card
[p_card
]);
4088 if (currSCCB
->Sccb_XferCnt
== 0) {
4090 if ((currSCCB
->ControlByte
& SCCB_DATA_XFER_IN
) &&
4091 (currSCCB
->HostStatus
== SCCB_COMPLETE
))
4092 currSCCB
->HostStatus
= SCCB_DATA_OVER_RUN
;
4094 FPT_sxfrp(port
, p_card
);
4095 if (!(RDW_HARPOON((port
+ hp_intstat
)) & (BUS_FREE
| RESET
)))
4096 FPT_phaseDecode(port
, p_card
);
4101 /*---------------------------------------------------------------------
4103 * Function: Command Phase
4105 * Description: Load the CDB into the automation and start it up.
4107 *---------------------------------------------------------------------*/
4109 static void FPT_phaseCommand(unsigned long p_port
, unsigned char p_card
)
4111 struct sccb
*currSCCB
;
4112 unsigned long cdb_reg
;
4115 currSCCB
= FPT_BL_Card
[p_card
].currentSCCB
;
4117 if (currSCCB
->OperationCode
== RESET_COMMAND
) {
4119 currSCCB
->HostStatus
= SCCB_PHASE_SEQUENCE_FAIL
;
4120 currSCCB
->CdbLength
= SIX_BYTE_CMD
;
4123 WR_HARPOON(p_port
+ hp_scsisig
, 0x00);
4125 ARAM_ACCESS(p_port
);
4127 cdb_reg
= p_port
+ CMD_STRT
;
4129 for (i
= 0; i
< currSCCB
->CdbLength
; i
++) {
4131 if (currSCCB
->OperationCode
== RESET_COMMAND
)
4133 WRW_HARPOON(cdb_reg
, (MPM_OP
+ ACOMMAND
+ 0x00));
4136 WRW_HARPOON(cdb_reg
,
4137 (MPM_OP
+ ACOMMAND
+ currSCCB
->Cdb
[i
]));
4141 if (currSCCB
->CdbLength
!= TWELVE_BYTE_CMD
)
4142 WRW_HARPOON(cdb_reg
, (BRH_OP
+ ALWAYS
+ NP
));
4144 WR_HARPOON(p_port
+ hp_portctrl_0
, (SCSI_PORT
));
4146 currSCCB
->Sccb_scsistat
= COMMAND_ST
;
4148 WR_HARPOON(p_port
+ hp_autostart_3
, (AUTO_IMMED
| CMD_ONLY_STRT
));
4149 SGRAM_ACCESS(p_port
);
4152 /*---------------------------------------------------------------------
4154 * Function: Status phase
4156 * Description: Bring in the status and command complete message bytes
4158 *---------------------------------------------------------------------*/
4160 static void FPT_phaseStatus(unsigned long port
, unsigned char p_card
)
4162 /* Start-up the automation to finish off this command and let the
4163 isr handle the interrupt for command complete when it comes in.
4164 We could wait here for the interrupt to be generated?
4167 WR_HARPOON(port
+ hp_scsisig
, 0x00);
4169 WR_HARPOON(port
+ hp_autostart_0
, (AUTO_IMMED
+ END_DATA_START
));
4172 /*---------------------------------------------------------------------
4174 * Function: Phase Message Out
4176 * Description: Send out our message (if we have one) and handle whatever
4179 *---------------------------------------------------------------------*/
4181 static void FPT_phaseMsgOut(unsigned long port
, unsigned char p_card
)
4183 unsigned char message
, scsiID
;
4184 struct sccb
*currSCCB
;
4185 struct sccb_mgr_tar_info
*currTar_Info
;
4187 currSCCB
= FPT_BL_Card
[p_card
].currentSCCB
;
4189 if (currSCCB
!= NULL
) {
4191 message
= currSCCB
->Sccb_scsimsg
;
4192 scsiID
= currSCCB
->TargID
;
4194 if (message
== SMDEV_RESET
) {
4196 currTar_Info
= &FPT_sccbMgrTbl
[p_card
][scsiID
];
4197 currTar_Info
->TarSyncCtrl
= 0;
4198 FPT_sssyncv(port
, scsiID
, NARROW_SCSI
, currTar_Info
);
4200 if (FPT_sccbMgrTbl
[p_card
][scsiID
].
4201 TarEEValue
& EE_SYNC_MASK
) {
4203 FPT_sccbMgrTbl
[p_card
][scsiID
].TarStatus
&=
4208 if (FPT_sccbMgrTbl
[p_card
][scsiID
].
4209 TarEEValue
& EE_WIDE_SCSI
) {
4211 FPT_sccbMgrTbl
[p_card
][scsiID
].TarStatus
&=
4215 FPT_queueFlushSccb(p_card
, SCCB_COMPLETE
);
4216 FPT_SccbMgrTableInitTarget(p_card
, scsiID
);
4217 } else if (currSCCB
->Sccb_scsistat
== ABORT_ST
) {
4218 currSCCB
->HostStatus
= SCCB_COMPLETE
;
4219 if (FPT_BL_Card
[p_card
].discQ_Tbl
[currSCCB
->Sccb_tag
] !=
4221 FPT_BL_Card
[p_card
].discQ_Tbl
[currSCCB
->
4223 FPT_sccbMgrTbl
[p_card
][scsiID
].TarTagQ_Cnt
--;
4228 else if (currSCCB
->Sccb_scsistat
< COMMAND_ST
) {
4230 if (message
== SMNO_OP
) {
4231 currSCCB
->Sccb_MGRFlags
|= F_DEV_SELECTED
;
4233 FPT_ssel(port
, p_card
);
4238 if (message
== SMABORT
)
4240 FPT_queueFlushSccb(p_card
, SCCB_COMPLETE
);
4247 WRW_HARPOON((port
+ hp_intstat
), (BUS_FREE
| PHASE
| XFER_CNT_0
));
4249 WR_HARPOON(port
+ hp_portctrl_0
, SCSI_BUS_EN
);
4251 WR_HARPOON(port
+ hp_scsidata_0
, message
);
4253 WR_HARPOON(port
+ hp_scsisig
, (SCSI_ACK
+ S_ILL_PH
));
4257 WR_HARPOON(port
+ hp_portctrl_0
, 0x00);
4259 if ((message
== SMABORT
) || (message
== SMDEV_RESET
) ||
4260 (message
== SMABORT_TAG
)) {
4262 while (!(RDW_HARPOON((port
+ hp_intstat
)) & (BUS_FREE
| PHASE
))) {
4265 if (RDW_HARPOON((port
+ hp_intstat
)) & BUS_FREE
) {
4266 WRW_HARPOON((port
+ hp_intstat
), BUS_FREE
);
4268 if (currSCCB
!= NULL
) {
4270 if ((FPT_BL_Card
[p_card
].
4271 globalFlags
& F_CONLUN_IO
)
4273 ((FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
].
4274 TarStatus
& TAR_TAG_Q_MASK
) !=
4276 FPT_sccbMgrTbl
[p_card
][currSCCB
->
4278 TarLUNBusy
[currSCCB
->Lun
] = 0;
4280 FPT_sccbMgrTbl
[p_card
][currSCCB
->
4284 FPT_queueCmdComplete(&FPT_BL_Card
[p_card
],
4289 FPT_BL_Card
[p_card
].globalFlags
|=
4296 FPT_sxfrp(port
, p_card
);
4302 if (message
== SMPARITY
) {
4303 currSCCB
->Sccb_scsimsg
= SMNO_OP
;
4304 WR_HARPOON(port
+ hp_autostart_1
,
4305 (AUTO_IMMED
+ DISCONNECT_START
));
4307 FPT_sxfrp(port
, p_card
);
4312 /*---------------------------------------------------------------------
4314 * Function: Message In phase
4316 * Description: Bring in the message and determine what to do with it.
4318 *---------------------------------------------------------------------*/
4320 static void FPT_phaseMsgIn(unsigned long port
, unsigned char p_card
)
4322 unsigned char message
;
4323 struct sccb
*currSCCB
;
4325 currSCCB
= FPT_BL_Card
[p_card
].currentSCCB
;
4327 if (FPT_BL_Card
[p_card
].globalFlags
& F_HOST_XFER_ACT
) {
4329 FPT_phaseChkFifo(port
, p_card
);
4332 message
= RD_HARPOON(port
+ hp_scsidata_0
);
4333 if ((message
== SMDISC
) || (message
== SMSAVE_DATA_PTR
)) {
4335 WR_HARPOON(port
+ hp_autostart_1
,
4336 (AUTO_IMMED
+ END_DATA_START
));
4342 message
= FPT_sfm(port
, currSCCB
);
4345 FPT_sdecm(message
, port
, p_card
);
4348 if (currSCCB
->Sccb_scsimsg
!= SMPARITY
)
4350 WR_HARPOON(port
+ hp_autostart_1
,
4351 (AUTO_IMMED
+ DISCONNECT_START
));
4357 /*---------------------------------------------------------------------
4359 * Function: Illegal phase
4361 * Description: Target switched to some illegal phase, so all we can do
4362 * is report an error back to the host (if that is possible)
4363 * and send an ABORT message to the misbehaving target.
4365 *---------------------------------------------------------------------*/
4367 static void FPT_phaseIllegal(unsigned long port
, unsigned char p_card
)
4369 struct sccb
*currSCCB
;
4371 currSCCB
= FPT_BL_Card
[p_card
].currentSCCB
;
4373 WR_HARPOON(port
+ hp_scsisig
, RD_HARPOON(port
+ hp_scsisig
));
4374 if (currSCCB
!= NULL
) {
4376 currSCCB
->HostStatus
= SCCB_PHASE_SEQUENCE_FAIL
;
4377 currSCCB
->Sccb_scsistat
= ABORT_ST
;
4378 currSCCB
->Sccb_scsimsg
= SMABORT
;
4381 ACCEPT_MSG_ATN(port
);
4384 /*---------------------------------------------------------------------
4386 * Function: Phase Check FIFO
4388 * Description: Make sure data has been flushed from both FIFOs and abort
4389 * the operations if necessary.
4391 *---------------------------------------------------------------------*/
4393 static void FPT_phaseChkFifo(unsigned long port
, unsigned char p_card
)
4395 unsigned long xfercnt
;
4396 struct sccb
*currSCCB
;
4398 currSCCB
= FPT_BL_Card
[p_card
].currentSCCB
;
4400 if (currSCCB
->Sccb_scsistat
== DATA_IN_ST
) {
4402 while ((!(RD_HARPOON(port
+ hp_xferstat
) & FIFO_EMPTY
)) &&
4403 (RD_HARPOON(port
+ hp_ext_status
) & BM_CMD_BUSY
)) {
4406 if (!(RD_HARPOON(port
+ hp_xferstat
) & FIFO_EMPTY
)) {
4407 currSCCB
->Sccb_ATC
+= currSCCB
->Sccb_XferCnt
;
4409 currSCCB
->Sccb_XferCnt
= 0;
4411 if ((RDW_HARPOON((port
+ hp_intstat
)) & PARITY
) &&
4412 (currSCCB
->HostStatus
== SCCB_COMPLETE
)) {
4413 currSCCB
->HostStatus
= SCCB_PARITY_ERR
;
4414 WRW_HARPOON((port
+ hp_intstat
), PARITY
);
4417 FPT_hostDataXferAbort(port
, p_card
, currSCCB
);
4419 FPT_dataXferProcessor(port
, &FPT_BL_Card
[p_card
]);
4421 while ((!(RD_HARPOON(port
+ hp_xferstat
) & FIFO_EMPTY
))
4422 && (RD_HARPOON(port
+ hp_ext_status
) &
4429 /*End Data In specific code. */
4430 GET_XFER_CNT(port
, xfercnt
);
4432 WR_HARPOON(port
+ hp_xfercnt_0
, 0x00);
4434 WR_HARPOON(port
+ hp_portctrl_0
, 0x00);
4436 currSCCB
->Sccb_ATC
+= (currSCCB
->Sccb_XferCnt
- xfercnt
);
4438 currSCCB
->Sccb_XferCnt
= xfercnt
;
4440 if ((RDW_HARPOON((port
+ hp_intstat
)) & PARITY
) &&
4441 (currSCCB
->HostStatus
== SCCB_COMPLETE
)) {
4443 currSCCB
->HostStatus
= SCCB_PARITY_ERR
;
4444 WRW_HARPOON((port
+ hp_intstat
), PARITY
);
4447 FPT_hostDataXferAbort(port
, p_card
, currSCCB
);
4449 WR_HARPOON(port
+ hp_fifowrite
, 0x00);
4450 WR_HARPOON(port
+ hp_fiforead
, 0x00);
4451 WR_HARPOON(port
+ hp_xferstat
, 0x00);
4453 WRW_HARPOON((port
+ hp_intstat
), XFER_CNT_0
);
4456 /*---------------------------------------------------------------------
4458 * Function: Phase Bus Free
4460 * Description: We just went bus free so figure out if it was
4461 * because of command complete or from a disconnect.
4463 *---------------------------------------------------------------------*/
4464 static void FPT_phaseBusFree(unsigned long port
, unsigned char p_card
)
4466 struct sccb
*currSCCB
;
4468 currSCCB
= FPT_BL_Card
[p_card
].currentSCCB
;
4470 if (currSCCB
!= NULL
) {
4474 if (currSCCB
->OperationCode
== RESET_COMMAND
) {
4476 if ((FPT_BL_Card
[p_card
].globalFlags
& F_CONLUN_IO
) &&
4477 ((FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
].
4478 TarStatus
& TAR_TAG_Q_MASK
) != TAG_Q_TRYING
))
4479 FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
].
4480 TarLUNBusy
[currSCCB
->Lun
] = 0;
4482 FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
].
4485 FPT_queueCmdComplete(&FPT_BL_Card
[p_card
], currSCCB
,
4488 FPT_queueSearchSelect(&FPT_BL_Card
[p_card
], p_card
);
4492 else if (currSCCB
->Sccb_scsistat
== SELECT_SN_ST
) {
4493 FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
].TarStatus
|=
4494 (unsigned char)SYNC_SUPPORTED
;
4495 FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
].TarEEValue
&=
4499 else if (currSCCB
->Sccb_scsistat
== SELECT_WN_ST
) {
4500 FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
].TarStatus
=
4501 (FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
].
4502 TarStatus
& ~WIDE_ENABLED
) | WIDE_NEGOCIATED
;
4504 FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
].TarEEValue
&=
4508 else if (currSCCB
->Sccb_scsistat
== SELECT_Q_ST
) {
4509 /* Make sure this is not a phony BUS_FREE. If we were
4510 reselected or if BUSY is NOT on then this is a
4511 valid BUS FREE. SRR Wednesday, 5/10/1995. */
4513 if ((!(RD_HARPOON(port
+ hp_scsisig
) & SCSI_BSY
)) ||
4514 (RDW_HARPOON((port
+ hp_intstat
)) & RSEL
)) {
4515 FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
].
4516 TarStatus
&= ~TAR_TAG_Q_MASK
;
4517 FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
].
4518 TarStatus
|= TAG_Q_REJECT
;
4528 currSCCB
->Sccb_scsistat
= BUS_FREE_ST
;
4530 if (!currSCCB
->HostStatus
) {
4531 currSCCB
->HostStatus
= SCCB_PHASE_SEQUENCE_FAIL
;
4534 if ((FPT_BL_Card
[p_card
].globalFlags
& F_CONLUN_IO
) &&
4535 ((FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
].
4536 TarStatus
& TAR_TAG_Q_MASK
) != TAG_Q_TRYING
))
4537 FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
].
4538 TarLUNBusy
[currSCCB
->Lun
] = 0;
4540 FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
].
4543 FPT_queueCmdComplete(&FPT_BL_Card
[p_card
], currSCCB
,
4548 FPT_BL_Card
[p_card
].globalFlags
|= F_NEW_SCCB_CMD
;
4550 } /*end if !=null */
4553 /*---------------------------------------------------------------------
4555 * Function: Auto Load Default Map
4557 * Description: Load the Automation RAM with the defualt map values.
4559 *---------------------------------------------------------------------*/
4560 static void FPT_autoLoadDefaultMap(unsigned long p_port
)
4562 unsigned long map_addr
;
4564 ARAM_ACCESS(p_port
);
4565 map_addr
= p_port
+ hp_aramBase
;
4567 WRW_HARPOON(map_addr
, (MPM_OP
+ AMSG_OUT
+ 0xC0)); /*ID MESSAGE */
4569 WRW_HARPOON(map_addr
, (MPM_OP
+ AMSG_OUT
+ 0x20)); /*SIMPLE TAG QUEUEING MSG */
4571 WRW_HARPOON(map_addr
, RAT_OP
); /*RESET ATTENTION */
4573 WRW_HARPOON(map_addr
, (MPM_OP
+ AMSG_OUT
+ 0x00)); /*TAG ID MSG */
4575 WRW_HARPOON(map_addr
, (MPM_OP
+ ACOMMAND
+ 0x00)); /*CDB BYTE 0 */
4577 WRW_HARPOON(map_addr
, (MPM_OP
+ ACOMMAND
+ 0x00)); /*CDB BYTE 1 */
4579 WRW_HARPOON(map_addr
, (MPM_OP
+ ACOMMAND
+ 0x00)); /*CDB BYTE 2 */
4581 WRW_HARPOON(map_addr
, (MPM_OP
+ ACOMMAND
+ 0x00)); /*CDB BYTE 3 */
4583 WRW_HARPOON(map_addr
, (MPM_OP
+ ACOMMAND
+ 0x00)); /*CDB BYTE 4 */
4585 WRW_HARPOON(map_addr
, (MPM_OP
+ ACOMMAND
+ 0x00)); /*CDB BYTE 5 */
4587 WRW_HARPOON(map_addr
, (MPM_OP
+ ACOMMAND
+ 0x00)); /*CDB BYTE 6 */
4589 WRW_HARPOON(map_addr
, (MPM_OP
+ ACOMMAND
+ 0x00)); /*CDB BYTE 7 */
4591 WRW_HARPOON(map_addr
, (MPM_OP
+ ACOMMAND
+ 0x00)); /*CDB BYTE 8 */
4593 WRW_HARPOON(map_addr
, (MPM_OP
+ ACOMMAND
+ 0x00)); /*CDB BYTE 9 */
4595 WRW_HARPOON(map_addr
, (MPM_OP
+ ACOMMAND
+ 0x00)); /*CDB BYTE 10 */
4597 WRW_HARPOON(map_addr
, (MPM_OP
+ ACOMMAND
+ 0x00)); /*CDB BYTE 11 */
4599 WRW_HARPOON(map_addr
, (CPE_OP
+ ADATA_OUT
+ DINT
)); /*JUMP IF DATA OUT */
4601 WRW_HARPOON(map_addr
, (TCB_OP
+ FIFO_0
+ DI
)); /*JUMP IF NO DATA IN FIFO */
4602 map_addr
+= 2; /*This means AYNC DATA IN */
4603 WRW_HARPOON(map_addr
, (SSI_OP
+ SSI_IDO_STRT
)); /*STOP AND INTERRUPT */
4605 WRW_HARPOON(map_addr
, (CPE_OP
+ ADATA_IN
+ DINT
)); /*JUMP IF NOT DATA IN PHZ */
4607 WRW_HARPOON(map_addr
, (CPN_OP
+ AMSG_IN
+ ST
)); /*IF NOT MSG IN CHECK 4 DATA IN */
4609 WRW_HARPOON(map_addr
, (CRD_OP
+ SDATA
+ 0x02)); /*SAVE DATA PTR MSG? */
4611 WRW_HARPOON(map_addr
, (BRH_OP
+ NOT_EQ
+ DC
)); /*GO CHECK FOR DISCONNECT MSG */
4613 WRW_HARPOON(map_addr
, (MRR_OP
+ SDATA
+ D_AR1
)); /*SAVE DATA PTRS MSG */
4615 WRW_HARPOON(map_addr
, (CPN_OP
+ AMSG_IN
+ ST
)); /*IF NOT MSG IN CHECK DATA IN */
4617 WRW_HARPOON(map_addr
, (CRD_OP
+ SDATA
+ 0x04)); /*DISCONNECT MSG? */
4619 WRW_HARPOON(map_addr
, (BRH_OP
+ NOT_EQ
+ UNKNWN
)); /*UKNKNOWN MSG */
4621 WRW_HARPOON(map_addr
, (MRR_OP
+ SDATA
+ D_BUCKET
)); /*XFER DISCONNECT MSG */
4623 WRW_HARPOON(map_addr
, (SSI_OP
+ SSI_ITAR_DISC
)); /*STOP AND INTERRUPT */
4625 WRW_HARPOON(map_addr
, (CPN_OP
+ ASTATUS
+ UNKNWN
)); /*JUMP IF NOT STATUS PHZ. */
4627 WRW_HARPOON(map_addr
, (MRR_OP
+ SDATA
+ D_AR0
)); /*GET STATUS BYTE */
4629 WRW_HARPOON(map_addr
, (CPN_OP
+ AMSG_IN
+ CC
)); /*ERROR IF NOT MSG IN PHZ */
4631 WRW_HARPOON(map_addr
, (CRD_OP
+ SDATA
+ 0x00)); /*CHECK FOR CMD COMPLETE MSG. */
4633 WRW_HARPOON(map_addr
, (BRH_OP
+ NOT_EQ
+ CC
)); /*ERROR IF NOT CMD COMPLETE MSG. */
4635 WRW_HARPOON(map_addr
, (MRR_OP
+ SDATA
+ D_BUCKET
)); /*GET CMD COMPLETE MSG */
4637 WRW_HARPOON(map_addr
, (SSI_OP
+ SSI_ICMD_COMP
)); /*END OF COMMAND */
4640 WRW_HARPOON(map_addr
, (SSI_OP
+ SSI_IUNKWN
)); /*RECEIVED UNKNOWN MSG BYTE */
4642 WRW_HARPOON(map_addr
, (SSI_OP
+ SSI_INO_CC
)); /*NO COMMAND COMPLETE AFTER STATUS */
4644 WRW_HARPOON(map_addr
, (SSI_OP
+ SSI_ITICKLE
)); /*BIOS Tickled the Mgr */
4646 WRW_HARPOON(map_addr
, (SSI_OP
+ SSI_IRFAIL
)); /*EXPECTED ID/TAG MESSAGES AND */
4647 map_addr
+= 2; /* DIDN'T GET ONE */
4648 WRW_HARPOON(map_addr
, (CRR_OP
+ AR3
+ S_IDREG
)); /* comp SCSI SEL ID & AR3 */
4650 WRW_HARPOON(map_addr
, (BRH_OP
+ EQUAL
+ 0x00)); /*SEL ID OK then Conti. */
4652 WRW_HARPOON(map_addr
, (SSI_OP
+ SSI_INO_CC
)); /*NO COMMAND COMPLETE AFTER STATUS */
4654 SGRAM_ACCESS(p_port
);
4657 /*---------------------------------------------------------------------
4659 * Function: Auto Command Complete
4661 * Description: Post command back to host and find another command
4664 *---------------------------------------------------------------------*/
4666 static void FPT_autoCmdCmplt(unsigned long p_port
, unsigned char p_card
)
4668 struct sccb
*currSCCB
;
4669 unsigned char status_byte
;
4671 currSCCB
= FPT_BL_Card
[p_card
].currentSCCB
;
4673 status_byte
= RD_HARPOON(p_port
+ hp_gp_reg_0
);
4675 FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
].TarLUN_CA
= 0;
4677 if (status_byte
!= SSGOOD
) {
4679 if (status_byte
== SSQ_FULL
) {
4681 if (((FPT_BL_Card
[p_card
].globalFlags
& F_CONLUN_IO
) &&
4682 ((FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
].
4683 TarStatus
& TAR_TAG_Q_MASK
) != TAG_Q_TRYING
))) {
4684 FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
].
4685 TarLUNBusy
[currSCCB
->Lun
] = 1;
4686 if (FPT_BL_Card
[p_card
].discQCount
!= 0)
4687 FPT_BL_Card
[p_card
].discQCount
--;
4688 FPT_BL_Card
[p_card
].
4689 discQ_Tbl
[FPT_sccbMgrTbl
[p_card
]
4691 LunDiscQ_Idx
[currSCCB
->Lun
]] =
4694 FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
].
4696 if (currSCCB
->Sccb_tag
) {
4697 if (FPT_BL_Card
[p_card
].discQCount
!= 0)
4698 FPT_BL_Card
[p_card
].
4700 FPT_BL_Card
[p_card
].discQ_Tbl
[currSCCB
->
4704 if (FPT_BL_Card
[p_card
].discQCount
!= 0)
4705 FPT_BL_Card
[p_card
].
4707 FPT_BL_Card
[p_card
].
4708 discQ_Tbl
[FPT_sccbMgrTbl
[p_card
]
4710 LunDiscQ_Idx
[0]] = NULL
;
4714 currSCCB
->Sccb_MGRFlags
|= F_STATUSLOADED
;
4716 FPT_queueSelectFail(&FPT_BL_Card
[p_card
], p_card
);
4721 if (currSCCB
->Sccb_scsistat
== SELECT_SN_ST
) {
4722 FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
].TarStatus
|=
4723 (unsigned char)SYNC_SUPPORTED
;
4725 FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
].TarEEValue
&=
4727 FPT_BL_Card
[p_card
].globalFlags
|= F_NEW_SCCB_CMD
;
4729 if (((FPT_BL_Card
[p_card
].globalFlags
& F_CONLUN_IO
) &&
4730 ((FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
].
4731 TarStatus
& TAR_TAG_Q_MASK
) != TAG_Q_TRYING
))) {
4732 FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
].
4733 TarLUNBusy
[currSCCB
->Lun
] = 1;
4734 if (FPT_BL_Card
[p_card
].discQCount
!= 0)
4735 FPT_BL_Card
[p_card
].discQCount
--;
4736 FPT_BL_Card
[p_card
].
4737 discQ_Tbl
[FPT_sccbMgrTbl
[p_card
]
4739 LunDiscQ_Idx
[currSCCB
->Lun
]] =
4742 FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
].
4744 if (currSCCB
->Sccb_tag
) {
4745 if (FPT_BL_Card
[p_card
].discQCount
!= 0)
4746 FPT_BL_Card
[p_card
].
4748 FPT_BL_Card
[p_card
].discQ_Tbl
[currSCCB
->
4752 if (FPT_BL_Card
[p_card
].discQCount
!= 0)
4753 FPT_BL_Card
[p_card
].
4755 FPT_BL_Card
[p_card
].
4756 discQ_Tbl
[FPT_sccbMgrTbl
[p_card
]
4758 LunDiscQ_Idx
[0]] = NULL
;
4765 if (currSCCB
->Sccb_scsistat
== SELECT_WN_ST
) {
4767 FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
].TarStatus
=
4768 (FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
].
4769 TarStatus
& ~WIDE_ENABLED
) | WIDE_NEGOCIATED
;
4771 FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
].TarEEValue
&=
4773 FPT_BL_Card
[p_card
].globalFlags
|= F_NEW_SCCB_CMD
;
4775 if (((FPT_BL_Card
[p_card
].globalFlags
& F_CONLUN_IO
) &&
4776 ((FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
].
4777 TarStatus
& TAR_TAG_Q_MASK
) != TAG_Q_TRYING
))) {
4778 FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
].
4779 TarLUNBusy
[currSCCB
->Lun
] = 1;
4780 if (FPT_BL_Card
[p_card
].discQCount
!= 0)
4781 FPT_BL_Card
[p_card
].discQCount
--;
4782 FPT_BL_Card
[p_card
].
4783 discQ_Tbl
[FPT_sccbMgrTbl
[p_card
]
4785 LunDiscQ_Idx
[currSCCB
->Lun
]] =
4788 FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
].
4790 if (currSCCB
->Sccb_tag
) {
4791 if (FPT_BL_Card
[p_card
].discQCount
!= 0)
4792 FPT_BL_Card
[p_card
].
4794 FPT_BL_Card
[p_card
].discQ_Tbl
[currSCCB
->
4798 if (FPT_BL_Card
[p_card
].discQCount
!= 0)
4799 FPT_BL_Card
[p_card
].
4801 FPT_BL_Card
[p_card
].
4802 discQ_Tbl
[FPT_sccbMgrTbl
[p_card
]
4804 LunDiscQ_Idx
[0]] = NULL
;
4811 if (status_byte
== SSCHECK
) {
4812 if (FPT_BL_Card
[p_card
].globalFlags
& F_DO_RENEGO
) {
4813 if (FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
].
4814 TarEEValue
& EE_SYNC_MASK
) {
4815 FPT_sccbMgrTbl
[p_card
][currSCCB
->
4817 TarStatus
&= ~TAR_SYNC_MASK
;
4819 if (FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
].
4820 TarEEValue
& EE_WIDE_SCSI
) {
4821 FPT_sccbMgrTbl
[p_card
][currSCCB
->
4823 TarStatus
&= ~TAR_WIDE_MASK
;
4828 if (!(currSCCB
->Sccb_XferState
& F_AUTO_SENSE
)) {
4830 currSCCB
->SccbStatus
= SCCB_ERROR
;
4831 currSCCB
->TargetStatus
= status_byte
;
4833 if (status_byte
== SSCHECK
) {
4835 FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
].
4838 if (currSCCB
->RequestSenseLength
!=
4839 NO_AUTO_REQUEST_SENSE
) {
4841 if (currSCCB
->RequestSenseLength
== 0)
4842 currSCCB
->RequestSenseLength
=
4845 FPT_ssenss(&FPT_BL_Card
[p_card
]);
4846 FPT_BL_Card
[p_card
].globalFlags
|=
4849 if (((FPT_BL_Card
[p_card
].
4850 globalFlags
& F_CONLUN_IO
)
4852 ((FPT_sccbMgrTbl
[p_card
]
4854 TarStatus
& TAR_TAG_Q_MASK
) !=
4856 FPT_sccbMgrTbl
[p_card
]
4858 TarLUNBusy
[currSCCB
->Lun
] =
4860 if (FPT_BL_Card
[p_card
].
4862 FPT_BL_Card
[p_card
].
4864 FPT_BL_Card
[p_card
].
4865 discQ_Tbl
[FPT_sccbMgrTbl
4873 FPT_sccbMgrTbl
[p_card
]
4876 if (currSCCB
->Sccb_tag
) {
4877 if (FPT_BL_Card
[p_card
].
4882 FPT_BL_Card
[p_card
].
4883 discQ_Tbl
[currSCCB
->
4887 if (FPT_BL_Card
[p_card
].
4892 FPT_BL_Card
[p_card
].
4907 if ((FPT_BL_Card
[p_card
].globalFlags
& F_CONLUN_IO
) &&
4908 ((FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
].
4909 TarStatus
& TAR_TAG_Q_MASK
) != TAG_Q_TRYING
))
4910 FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
].TarLUNBusy
[currSCCB
->
4913 FPT_sccbMgrTbl
[p_card
][currSCCB
->TargID
].TarLUNBusy
[0] = 0;
4915 FPT_queueCmdComplete(&FPT_BL_Card
[p_card
], currSCCB
, p_card
);
4918 #define SHORT_WAIT 0x0000000F
4919 #define LONG_WAIT 0x0000FFFFL
4921 /*---------------------------------------------------------------------
4923 * Function: Data Transfer Processor
4925 * Description: This routine performs two tasks.
4926 * (1) Start data transfer by calling HOST_DATA_XFER_START
4927 * function. Once data transfer is started, (2) Depends
4928 * on the type of data transfer mode Scatter/Gather mode
4929 * or NON Scatter/Gather mode. In NON Scatter/Gather mode,
4930 * this routine checks Sccb_MGRFlag (F_HOST_XFER_ACT bit) for
4931 * data transfer done. In Scatter/Gather mode, this routine
4932 * checks bus master command complete and dual rank busy
4933 * bit to keep chaining SC transfer command. Similarly,
4934 * in Scatter/Gather mode, it checks Sccb_MGRFlag
4935 * (F_HOST_XFER_ACT bit) for data transfer done.
4937 *---------------------------------------------------------------------*/
4939 static void FPT_dataXferProcessor(unsigned long port
,
4940 struct sccb_card
*pCurrCard
)
4942 struct sccb
*currSCCB
;
4944 currSCCB
= pCurrCard
->currentSCCB
;
4946 if (currSCCB
->Sccb_XferState
& F_SG_XFER
) {
4947 if (pCurrCard
->globalFlags
& F_HOST_XFER_ACT
)
4949 currSCCB
->Sccb_sgseg
+= (unsigned char)SG_BUF_CNT
;
4950 currSCCB
->Sccb_SGoffset
= 0x00;
4952 pCurrCard
->globalFlags
|= F_HOST_XFER_ACT
;
4954 FPT_busMstrSGDataXferStart(port
, currSCCB
);
4958 if (!(pCurrCard
->globalFlags
& F_HOST_XFER_ACT
)) {
4959 pCurrCard
->globalFlags
|= F_HOST_XFER_ACT
;
4961 FPT_busMstrDataXferStart(port
, currSCCB
);
4966 /*---------------------------------------------------------------------
4968 * Function: BusMaster Scatter Gather Data Transfer Start
4972 *---------------------------------------------------------------------*/
4973 static void FPT_busMstrSGDataXferStart(unsigned long p_port
,
4974 struct sccb
*pcurrSCCB
)
4976 unsigned long count
, addr
, tmpSGCnt
;
4977 unsigned int sg_index
;
4978 unsigned char sg_count
, i
;
4979 unsigned long reg_offset
;
4981 if (pcurrSCCB
->Sccb_XferState
& F_HOST_XFER_DIR
) {
4983 count
= ((unsigned long)HOST_RD_CMD
) << 24;
4987 count
= ((unsigned long)HOST_WRT_CMD
) << 24;
4992 sg_index
= pcurrSCCB
->Sccb_sgseg
;
4993 reg_offset
= hp_aramBase
;
4995 i
= (unsigned char)(RD_HARPOON(p_port
+ hp_page_ctrl
) &
4996 ~(SGRAM_ARAM
| SCATTER_EN
));
4998 WR_HARPOON(p_port
+ hp_page_ctrl
, i
);
5000 while ((sg_count
< (unsigned char)SG_BUF_CNT
) &&
5001 ((unsigned long)(sg_index
* (unsigned int)SG_ELEMENT_SIZE
) <
5002 pcurrSCCB
->DataLength
)) {
5004 tmpSGCnt
+= *(((unsigned long *)pcurrSCCB
->DataPointer
) +
5007 count
|= *(((unsigned long *)pcurrSCCB
->DataPointer
) +
5010 addr
= *(((unsigned long *)pcurrSCCB
->DataPointer
) +
5011 ((sg_index
* 2) + 1));
5013 if ((!sg_count
) && (pcurrSCCB
->Sccb_SGoffset
)) {
5016 ((count
& 0x00FFFFFFL
) - pcurrSCCB
->Sccb_SGoffset
);
5018 (count
& 0xFF000000L
) | pcurrSCCB
->Sccb_SGoffset
;
5020 tmpSGCnt
= count
& 0x00FFFFFFL
;
5023 WR_HARP32(p_port
, reg_offset
, addr
);
5026 WR_HARP32(p_port
, reg_offset
, count
);
5029 count
&= 0xFF000000L
;
5035 pcurrSCCB
->Sccb_XferCnt
= tmpSGCnt
;
5037 WR_HARPOON(p_port
+ hp_sg_addr
, (sg_count
<< 4));
5039 if (pcurrSCCB
->Sccb_XferState
& F_HOST_XFER_DIR
) {
5041 WR_HARP32(p_port
, hp_xfercnt_0
, tmpSGCnt
);
5043 WR_HARPOON(p_port
+ hp_portctrl_0
,
5044 (DMA_PORT
| SCSI_PORT
| SCSI_INBIT
));
5045 WR_HARPOON(p_port
+ hp_scsisig
, S_DATAI_PH
);
5050 if ((!(RD_HARPOON(p_port
+ hp_synctarg_0
) & NARROW_SCSI
)) &&
5051 (tmpSGCnt
& 0x000000001)) {
5053 pcurrSCCB
->Sccb_XferState
|= F_ODD_BALL_CNT
;
5057 WR_HARP32(p_port
, hp_xfercnt_0
, tmpSGCnt
);
5059 WR_HARPOON(p_port
+ hp_portctrl_0
,
5060 (SCSI_PORT
| DMA_PORT
| DMA_RD
));
5061 WR_HARPOON(p_port
+ hp_scsisig
, S_DATAO_PH
);
5064 WR_HARPOON(p_port
+ hp_page_ctrl
, (unsigned char)(i
| SCATTER_EN
));
5068 /*---------------------------------------------------------------------
5070 * Function: BusMaster Data Transfer Start
5074 *---------------------------------------------------------------------*/
5075 static void FPT_busMstrDataXferStart(unsigned long p_port
,
5076 struct sccb
*pcurrSCCB
)
5078 unsigned long addr
, count
;
5080 if (!(pcurrSCCB
->Sccb_XferState
& F_AUTO_SENSE
)) {
5082 count
= pcurrSCCB
->Sccb_XferCnt
;
5085 (unsigned long)pcurrSCCB
->DataPointer
+ pcurrSCCB
->Sccb_ATC
;
5089 addr
= pcurrSCCB
->SensePointer
;
5090 count
= pcurrSCCB
->RequestSenseLength
;
5094 HP_SETUP_ADDR_CNT(p_port
, addr
, count
);
5096 if (pcurrSCCB
->Sccb_XferState
& F_HOST_XFER_DIR
) {
5098 WR_HARPOON(p_port
+ hp_portctrl_0
,
5099 (DMA_PORT
| SCSI_PORT
| SCSI_INBIT
));
5100 WR_HARPOON(p_port
+ hp_scsisig
, S_DATAI_PH
);
5102 WR_HARPOON(p_port
+ hp_xfer_cmd
,
5103 (XFER_DMA_HOST
| XFER_HOST_AUTO
| XFER_DMA_8BIT
));
5108 WR_HARPOON(p_port
+ hp_portctrl_0
,
5109 (SCSI_PORT
| DMA_PORT
| DMA_RD
));
5110 WR_HARPOON(p_port
+ hp_scsisig
, S_DATAO_PH
);
5112 WR_HARPOON(p_port
+ hp_xfer_cmd
,
5113 (XFER_HOST_DMA
| XFER_HOST_AUTO
| XFER_DMA_8BIT
));
5118 /*---------------------------------------------------------------------
5120 * Function: BusMaster Timeout Handler
5122 * Description: This function is called after a bus master command busy time
5123 * out is detected. This routines issue halt state machine
5124 * with a software time out for command busy. If command busy
5125 * is still asserted at the end of the time out, it issues
5126 * hard abort with another software time out. It hard abort
5127 * command busy is also time out, it'll just give up.
5129 *---------------------------------------------------------------------*/
5130 static unsigned char FPT_busMstrTimeOut(unsigned long p_port
)
5132 unsigned long timeout
;
5134 timeout
= LONG_WAIT
;
5136 WR_HARPOON(p_port
+ hp_sys_ctrl
, HALT_MACH
);
5138 while ((!(RD_HARPOON(p_port
+ hp_ext_status
) & CMD_ABORTED
))
5142 if (RD_HARPOON(p_port
+ hp_ext_status
) & BM_CMD_BUSY
) {
5143 WR_HARPOON(p_port
+ hp_sys_ctrl
, HARD_ABORT
);
5145 timeout
= LONG_WAIT
;
5146 while ((RD_HARPOON(p_port
+ hp_ext_status
) & BM_CMD_BUSY
)
5151 RD_HARPOON(p_port
+ hp_int_status
); /*Clear command complete */
5153 if (RD_HARPOON(p_port
+ hp_ext_status
) & BM_CMD_BUSY
) {
5162 /*---------------------------------------------------------------------
5164 * Function: Host Data Transfer Abort
5166 * Description: Abort any in progress transfer.
5168 *---------------------------------------------------------------------*/
5169 static void FPT_hostDataXferAbort(unsigned long port
, unsigned char p_card
,
5170 struct sccb
*pCurrSCCB
)
5173 unsigned long timeout
;
5174 unsigned long remain_cnt
;
5175 unsigned int sg_ptr
;
5177 FPT_BL_Card
[p_card
].globalFlags
&= ~F_HOST_XFER_ACT
;
5179 if (pCurrSCCB
->Sccb_XferState
& F_AUTO_SENSE
) {
5181 if (!(RD_HARPOON(port
+ hp_int_status
) & INT_CMD_COMPL
)) {
5183 WR_HARPOON(port
+ hp_bm_ctrl
,
5184 (RD_HARPOON(port
+ hp_bm_ctrl
) |
5186 timeout
= LONG_WAIT
;
5188 while ((RD_HARPOON(port
+ hp_ext_status
) & BM_CMD_BUSY
)
5192 WR_HARPOON(port
+ hp_bm_ctrl
,
5193 (RD_HARPOON(port
+ hp_bm_ctrl
) &
5196 if (RD_HARPOON(port
+ hp_ext_status
) & BM_CMD_BUSY
) {
5198 if (FPT_busMstrTimeOut(port
)) {
5200 if (pCurrSCCB
->HostStatus
== 0x00)
5202 pCurrSCCB
->HostStatus
=
5207 if (RD_HARPOON(port
+ hp_int_status
) &
5210 if (RD_HARPOON(port
+ hp_ext_status
) &
5213 if (pCurrSCCB
->HostStatus
==
5216 pCurrSCCB
->HostStatus
=
5223 else if (pCurrSCCB
->Sccb_XferCnt
) {
5225 if (pCurrSCCB
->Sccb_XferState
& F_SG_XFER
) {
5227 WR_HARPOON(port
+ hp_page_ctrl
,
5228 (RD_HARPOON(port
+ hp_page_ctrl
) &
5231 WR_HARPOON(port
+ hp_sg_addr
, 0x00);
5233 sg_ptr
= pCurrSCCB
->Sccb_sgseg
+ SG_BUF_CNT
;
5236 (unsigned int)(pCurrSCCB
->DataLength
/
5240 (unsigned int)(pCurrSCCB
->DataLength
/
5244 remain_cnt
= pCurrSCCB
->Sccb_XferCnt
;
5246 while (remain_cnt
< 0x01000000L
) {
5252 long)(*(((unsigned long *)pCurrSCCB
->
5253 DataPointer
) + (sg_ptr
* 2)))) {
5257 long)(*(((unsigned long *)
5258 pCurrSCCB
->DataPointer
) +
5268 if (remain_cnt
< 0x01000000L
) {
5270 pCurrSCCB
->Sccb_SGoffset
= remain_cnt
;
5272 pCurrSCCB
->Sccb_sgseg
= (unsigned short)sg_ptr
;
5274 if ((unsigned long)(sg_ptr
* SG_ELEMENT_SIZE
) ==
5275 pCurrSCCB
->DataLength
&& (remain_cnt
== 0))
5277 pCurrSCCB
->Sccb_XferState
|=
5283 if (pCurrSCCB
->HostStatus
== 0x00) {
5285 pCurrSCCB
->HostStatus
=
5291 if (!(pCurrSCCB
->Sccb_XferState
& F_HOST_XFER_DIR
)) {
5293 if (RD_HARPOON(port
+ hp_ext_status
) & BM_CMD_BUSY
) {
5295 FPT_busMstrTimeOut(port
);
5300 if (RD_HARPOON(port
+ hp_int_status
) &
5303 if (RD_HARPOON(port
+ hp_ext_status
) &
5306 if (pCurrSCCB
->HostStatus
==
5309 pCurrSCCB
->HostStatus
=
5320 if ((RD_HARPOON(port
+ hp_fifo_cnt
)) >= BM_THRESHOLD
) {
5322 timeout
= SHORT_WAIT
;
5324 while ((RD_HARPOON(port
+ hp_ext_status
) &
5326 && ((RD_HARPOON(port
+ hp_fifo_cnt
)) >=
5327 BM_THRESHOLD
) && timeout
--) {
5331 if (RD_HARPOON(port
+ hp_ext_status
) & BM_CMD_BUSY
) {
5333 WR_HARPOON(port
+ hp_bm_ctrl
,
5334 (RD_HARPOON(port
+ hp_bm_ctrl
) |
5337 timeout
= LONG_WAIT
;
5339 while ((RD_HARPOON(port
+ hp_ext_status
) &
5340 BM_CMD_BUSY
) && timeout
--) {
5343 WR_HARPOON(port
+ hp_bm_ctrl
,
5344 (RD_HARPOON(port
+ hp_bm_ctrl
) &
5347 if (RD_HARPOON(port
+ hp_ext_status
) &
5350 if (pCurrSCCB
->HostStatus
== 0x00) {
5352 pCurrSCCB
->HostStatus
=
5356 FPT_busMstrTimeOut(port
);
5360 if (RD_HARPOON(port
+ hp_int_status
) & INT_EXT_STATUS
) {
5362 if (RD_HARPOON(port
+ hp_ext_status
) &
5365 if (pCurrSCCB
->HostStatus
== 0x00) {
5367 pCurrSCCB
->HostStatus
=
5378 if (RD_HARPOON(port
+ hp_ext_status
) & BM_CMD_BUSY
) {
5380 timeout
= LONG_WAIT
;
5382 while ((RD_HARPOON(port
+ hp_ext_status
) & BM_CMD_BUSY
)
5386 if (RD_HARPOON(port
+ hp_ext_status
) & BM_CMD_BUSY
) {
5388 if (pCurrSCCB
->HostStatus
== 0x00) {
5390 pCurrSCCB
->HostStatus
= SCCB_BM_ERR
;
5393 FPT_busMstrTimeOut(port
);
5397 if (RD_HARPOON(port
+ hp_int_status
) & INT_EXT_STATUS
) {
5399 if (RD_HARPOON(port
+ hp_ext_status
) & BAD_EXT_STATUS
) {
5401 if (pCurrSCCB
->HostStatus
== 0x00) {
5403 pCurrSCCB
->HostStatus
= SCCB_BM_ERR
;
5409 if (pCurrSCCB
->Sccb_XferState
& F_SG_XFER
) {
5411 WR_HARPOON(port
+ hp_page_ctrl
,
5412 (RD_HARPOON(port
+ hp_page_ctrl
) &
5415 WR_HARPOON(port
+ hp_sg_addr
, 0x00);
5417 pCurrSCCB
->Sccb_sgseg
+= SG_BUF_CNT
;
5419 pCurrSCCB
->Sccb_SGoffset
= 0x00;
5421 if ((unsigned long)(pCurrSCCB
->Sccb_sgseg
*
5423 pCurrSCCB
->DataLength
) {
5425 pCurrSCCB
->Sccb_XferState
|= F_ALL_XFERRED
;
5427 pCurrSCCB
->Sccb_sgseg
=
5428 (unsigned short)(pCurrSCCB
->DataLength
/
5436 if (!(pCurrSCCB
->Sccb_XferState
& F_AUTO_SENSE
))
5438 pCurrSCCB
->Sccb_XferState
|= F_ALL_XFERRED
;
5442 WR_HARPOON(port
+ hp_int_mask
, (INT_CMD_COMPL
| SCSI_INTERRUPT
));
5445 /*---------------------------------------------------------------------
5447 * Function: Host Data Transfer Restart
5449 * Description: Reset the available count due to a restore data
5452 *---------------------------------------------------------------------*/
5453 static void FPT_hostDataXferRestart(struct sccb
*currSCCB
)
5455 unsigned long data_count
;
5456 unsigned int sg_index
;
5457 unsigned long *sg_ptr
;
5459 if (currSCCB
->Sccb_XferState
& F_SG_XFER
) {
5461 currSCCB
->Sccb_XferCnt
= 0;
5463 sg_index
= 0xffff; /*Index by long words into sg list. */
5464 data_count
= 0; /*Running count of SG xfer counts. */
5466 sg_ptr
= (unsigned long *)currSCCB
->DataPointer
;
5468 while (data_count
< currSCCB
->Sccb_ATC
) {
5471 data_count
+= *(sg_ptr
+ (sg_index
* 2));
5474 if (data_count
== currSCCB
->Sccb_ATC
) {
5476 currSCCB
->Sccb_SGoffset
= 0;
5481 currSCCB
->Sccb_SGoffset
=
5482 data_count
- currSCCB
->Sccb_ATC
;
5485 currSCCB
->Sccb_sgseg
= (unsigned short)sg_index
;
5489 currSCCB
->Sccb_XferCnt
=
5490 currSCCB
->DataLength
- currSCCB
->Sccb_ATC
;
5494 /*---------------------------------------------------------------------
5496 * Function: FPT_scini
5498 * Description: Setup all data structures necessary for SCAM selection.
5500 *---------------------------------------------------------------------*/
5502 static void FPT_scini(unsigned char p_card
, unsigned char p_our_id
,
5503 unsigned char p_power_up
)
5506 unsigned char loser
, assigned_id
;
5507 unsigned long p_port
;
5509 unsigned char i
, k
, ScamFlg
;
5510 struct sccb_card
*currCard
;
5511 struct nvram_info
*pCurrNvRam
;
5513 currCard
= &FPT_BL_Card
[p_card
];
5514 p_port
= currCard
->ioPort
;
5515 pCurrNvRam
= currCard
->pNvRamInfo
;
5518 ScamFlg
= pCurrNvRam
->niScamConf
;
5519 i
= pCurrNvRam
->niSysConf
;
5522 (unsigned char)FPT_utilEERead(p_port
, SCAM_CONFIG
/ 2);
5524 char)(FPT_utilEERead(p_port
, (SYSTEM_CONFIG
/ 2)));
5526 if (!(i
& 0x02)) /* check if reset bus in AutoSCSI parameter set */
5529 FPT_inisci(p_card
, p_port
, p_our_id
);
5531 /* Force to wait 1 sec after SCSI bus reset. Some SCAM device FW
5532 too slow to return to SCAM selection */
5535 FPT_Wait1Second(p_port);
5537 FPT_Wait(p_port, TO_250ms); */
5539 FPT_Wait1Second(p_port
);
5541 if ((ScamFlg
& SCAM_ENABLED
) && (ScamFlg
& SCAM_LEVEL2
)) {
5542 while (!(FPT_scarb(p_port
, INIT_SELTD
))) {
5548 FPT_scxferc(p_port
, SYNC_PTRN
);
5549 FPT_scxferc(p_port
, DOM_MSTR
);
5552 &FPT_scamInfo
[p_our_id
].id_string
[0]);
5553 } while (loser
== 0xFF);
5557 if ((p_power_up
) && (!loser
)) {
5558 FPT_sresb(p_port
, p_card
);
5559 FPT_Wait(p_port
, TO_250ms
);
5561 while (!(FPT_scarb(p_port
, INIT_SELTD
))) {
5567 FPT_scxferc(p_port
, SYNC_PTRN
);
5568 FPT_scxferc(p_port
, DOM_MSTR
);
5571 &FPT_scamInfo
[p_our_id
].
5573 } while (loser
== 0xFF);
5585 FPT_scamInfo
[p_our_id
].state
= ID_ASSIGNED
;
5587 if (ScamFlg
& SCAM_ENABLED
) {
5589 for (i
= 0; i
< MAX_SCSI_TAR
; i
++) {
5590 if ((FPT_scamInfo
[i
].state
== ID_UNASSIGNED
) ||
5591 (FPT_scamInfo
[i
].state
== ID_UNUSED
)) {
5592 if (FPT_scsell(p_port
, i
)) {
5593 FPT_scamInfo
[i
].state
= LEGACY
;
5594 if ((FPT_scamInfo
[i
].
5595 id_string
[0] != 0xFF)
5596 || (FPT_scamInfo
[i
].
5597 id_string
[1] != 0xFA)) {
5600 id_string
[0] = 0xFF;
5602 id_string
[1] = 0xFA;
5603 if (pCurrNvRam
== NULL
)
5613 FPT_sresb(p_port
, p_card
);
5614 FPT_Wait1Second(p_port
);
5615 while (!(FPT_scarb(p_port
, INIT_SELTD
))) {
5618 FPT_scasid(p_card
, p_port
);
5623 else if ((loser
) && (ScamFlg
& SCAM_ENABLED
)) {
5624 FPT_scamInfo
[p_our_id
].id_string
[0] = SLV_TYPE_CODE0
;
5626 FPT_scwtsel(p_port
);
5629 while (FPT_scxferc(p_port
, 0x00) != SYNC_PTRN
) {
5632 i
= FPT_scxferc(p_port
, 0x00);
5633 if (i
== ASSIGN_ID
) {
5637 &FPT_scamInfo
[p_our_id
].id_string
[0]))) {
5638 i
= FPT_scxferc(p_port
, 0x00);
5639 if (FPT_scvalq(i
)) {
5640 k
= FPT_scxferc(p_port
, 0x00);
5642 if (FPT_scvalq(k
)) {
5655 FPT_scamInfo
[currCard
->
5657 state
= ID_ASSIGNED
;
5658 FPT_scamInfo
[currCard
->
5668 else if (i
== SET_P_FLAG
) {
5669 if (!(FPT_scsendi(p_port
,
5670 &FPT_scamInfo
[p_our_id
].
5672 FPT_scamInfo
[p_our_id
].id_string
[0] |=
5675 } while (!assigned_id
);
5677 while (FPT_scxferc(p_port
, 0x00) != CFG_CMPLT
) {
5681 if (ScamFlg
& SCAM_ENABLED
) {
5683 if (currCard
->globalFlags
& F_UPDATE_EEPROM
) {
5684 FPT_scsavdi(p_card
, p_port
);
5685 currCard
->globalFlags
&= ~F_UPDATE_EEPROM
;
5690 for (i=0,k=0; i < MAX_SCSI_TAR; i++)
5692 if ((FPT_scamInfo[i].state == ID_ASSIGNED) ||
5693 (FPT_scamInfo[i].state == LEGACY))
5698 currCard->globalFlags |= F_SINGLE_DEVICE;
5700 currCard->globalFlags &= ~F_SINGLE_DEVICE;
5704 /*---------------------------------------------------------------------
5706 * Function: FPT_scarb
5708 * Description: Gain control of the bus and wait SCAM select time (250ms)
5710 *---------------------------------------------------------------------*/
5712 static int FPT_scarb(unsigned long p_port
, unsigned char p_sel_type
)
5714 if (p_sel_type
== INIT_SELTD
) {
5716 while (RD_HARPOON(p_port
+ hp_scsisig
) & (SCSI_SEL
| SCSI_BSY
)) {
5719 if (RD_HARPOON(p_port
+ hp_scsisig
) & SCSI_SEL
)
5722 if (RD_HARPOON(p_port
+ hp_scsidata_0
) != 00)
5725 WR_HARPOON(p_port
+ hp_scsisig
,
5726 (RD_HARPOON(p_port
+ hp_scsisig
) | SCSI_BSY
));
5728 if (RD_HARPOON(p_port
+ hp_scsisig
) & SCSI_SEL
) {
5730 WR_HARPOON(p_port
+ hp_scsisig
,
5731 (RD_HARPOON(p_port
+ hp_scsisig
) &
5736 WR_HARPOON(p_port
+ hp_scsisig
,
5737 (RD_HARPOON(p_port
+ hp_scsisig
) | SCSI_SEL
));
5739 if (RD_HARPOON(p_port
+ hp_scsidata_0
) != 00) {
5741 WR_HARPOON(p_port
+ hp_scsisig
,
5742 (RD_HARPOON(p_port
+ hp_scsisig
) &
5743 ~(SCSI_BSY
| SCSI_SEL
)));
5748 WR_HARPOON(p_port
+ hp_clkctrl_0
, (RD_HARPOON(p_port
+ hp_clkctrl_0
)
5750 WR_HARPOON(p_port
+ hp_scsireset
, SCAM_EN
);
5751 WR_HARPOON(p_port
+ hp_scsidata_0
, 0x00);
5752 WR_HARPOON(p_port
+ hp_scsidata_1
, 0x00);
5753 WR_HARPOON(p_port
+ hp_portctrl_0
, SCSI_BUS_EN
);
5755 WR_HARPOON(p_port
+ hp_scsisig
,
5756 (RD_HARPOON(p_port
+ hp_scsisig
) | SCSI_MSG
));
5758 WR_HARPOON(p_port
+ hp_scsisig
, (RD_HARPOON(p_port
+ hp_scsisig
)
5761 FPT_Wait(p_port
, TO_250ms
);
5766 /*---------------------------------------------------------------------
5768 * Function: FPT_scbusf
5770 * Description: Release the SCSI bus and disable SCAM selection.
5772 *---------------------------------------------------------------------*/
5774 static void FPT_scbusf(unsigned long p_port
)
5776 WR_HARPOON(p_port
+ hp_page_ctrl
,
5777 (RD_HARPOON(p_port
+ hp_page_ctrl
) | G_INT_DISABLE
));
5779 WR_HARPOON(p_port
+ hp_scsidata_0
, 0x00);
5781 WR_HARPOON(p_port
+ hp_portctrl_0
, (RD_HARPOON(p_port
+ hp_portctrl_0
)
5784 WR_HARPOON(p_port
+ hp_scsisig
, 0x00);
5786 WR_HARPOON(p_port
+ hp_scsireset
, (RD_HARPOON(p_port
+ hp_scsireset
)
5789 WR_HARPOON(p_port
+ hp_clkctrl_0
, (RD_HARPOON(p_port
+ hp_clkctrl_0
)
5792 WRW_HARPOON((p_port
+ hp_intstat
), (BUS_FREE
| AUTO_INT
| SCAM_SEL
));
5794 WR_HARPOON(p_port
+ hp_page_ctrl
,
5795 (RD_HARPOON(p_port
+ hp_page_ctrl
) & ~G_INT_DISABLE
));
5798 /*---------------------------------------------------------------------
5800 * Function: FPT_scasid
5802 * Description: Assign an ID to all the SCAM devices.
5804 *---------------------------------------------------------------------*/
5806 static void FPT_scasid(unsigned char p_card
, unsigned long p_port
)
5808 unsigned char temp_id_string
[ID_STRING_LENGTH
];
5810 unsigned char i
, k
, scam_id
;
5811 unsigned char crcBytes
[3];
5812 struct nvram_info
*pCurrNvRam
;
5813 unsigned short *pCrcBytes
;
5815 pCurrNvRam
= FPT_BL_Card
[p_card
].pNvRamInfo
;
5821 for (k
= 0; k
< ID_STRING_LENGTH
; k
++) {
5822 temp_id_string
[k
] = (unsigned char)0x00;
5825 FPT_scxferc(p_port
, SYNC_PTRN
);
5826 FPT_scxferc(p_port
, ASSIGN_ID
);
5828 if (!(FPT_sciso(p_port
, &temp_id_string
[0]))) {
5830 pCrcBytes
= (unsigned short *)&crcBytes
[0];
5831 *pCrcBytes
= FPT_CalcCrc16(&temp_id_string
[0]);
5832 crcBytes
[2] = FPT_CalcLrc(&temp_id_string
[0]);
5833 temp_id_string
[1] = crcBytes
[2];
5834 temp_id_string
[2] = crcBytes
[0];
5835 temp_id_string
[3] = crcBytes
[1];
5836 for (k
= 4; k
< ID_STRING_LENGTH
; k
++)
5837 temp_id_string
[k
] = (unsigned char)0x00;
5839 i
= FPT_scmachid(p_card
, temp_id_string
);
5841 if (i
== CLR_PRIORITY
) {
5842 FPT_scxferc(p_port
, MISC_CODE
);
5843 FPT_scxferc(p_port
, CLR_P_FLAG
);
5844 i
= 0; /*Not the last ID yet. */
5847 else if (i
!= NO_ID_AVAIL
) {
5849 FPT_scxferc(p_port
, ID_0_7
);
5851 FPT_scxferc(p_port
, ID_8_F
);
5853 scam_id
= (i
& (unsigned char)0x07);
5855 for (k
= 1; k
< 0x08; k
<<= 1)
5857 scam_id
+= 0x08; /*Count number of zeros in DB0-3. */
5859 FPT_scxferc(p_port
, scam_id
);
5861 i
= 0; /*Not the last ID yet. */
5871 FPT_scxferc(p_port
, SYNC_PTRN
);
5872 FPT_scxferc(p_port
, CFG_CMPLT
);
5875 /*---------------------------------------------------------------------
5877 * Function: FPT_scsel
5879 * Description: Select all the SCAM devices.
5881 *---------------------------------------------------------------------*/
5883 static void FPT_scsel(unsigned long p_port
)
5886 WR_HARPOON(p_port
+ hp_scsisig
, SCSI_SEL
);
5887 FPT_scwiros(p_port
, SCSI_MSG
);
5889 WR_HARPOON(p_port
+ hp_scsisig
, (SCSI_SEL
| SCSI_BSY
));
5891 WR_HARPOON(p_port
+ hp_scsisig
,
5892 (SCSI_SEL
| SCSI_BSY
| SCSI_IOBIT
| SCSI_CD
));
5893 WR_HARPOON(p_port
+ hp_scsidata_0
,
5894 (unsigned char)(RD_HARPOON(p_port
+ hp_scsidata_0
) |
5895 (unsigned char)(BIT(7) + BIT(6))));
5897 WR_HARPOON(p_port
+ hp_scsisig
, (SCSI_BSY
| SCSI_IOBIT
| SCSI_CD
));
5898 FPT_scwiros(p_port
, SCSI_SEL
);
5900 WR_HARPOON(p_port
+ hp_scsidata_0
,
5901 (unsigned char)(RD_HARPOON(p_port
+ hp_scsidata_0
) &
5902 ~(unsigned char)BIT(6)));
5903 FPT_scwirod(p_port
, BIT(6));
5905 WR_HARPOON(p_port
+ hp_scsisig
,
5906 (SCSI_SEL
| SCSI_BSY
| SCSI_IOBIT
| SCSI_CD
));
5909 /*---------------------------------------------------------------------
5911 * Function: FPT_scxferc
5913 * Description: Handshake the p_data (DB4-0) across the bus.
5915 *---------------------------------------------------------------------*/
5917 static unsigned char FPT_scxferc(unsigned long p_port
, unsigned char p_data
)
5919 unsigned char curr_data
, ret_data
;
5921 curr_data
= p_data
| BIT(7) | BIT(5); /*Start with DB7 & DB5 asserted. */
5923 WR_HARPOON(p_port
+ hp_scsidata_0
, curr_data
);
5925 curr_data
&= ~BIT(7);
5927 WR_HARPOON(p_port
+ hp_scsidata_0
, curr_data
);
5929 FPT_scwirod(p_port
, BIT(7)); /*Wait for DB7 to be released. */
5930 while (!(RD_HARPOON(p_port
+ hp_scsidata_0
) & BIT(5))) ;
5932 ret_data
= (RD_HARPOON(p_port
+ hp_scsidata_0
) & (unsigned char)0x1F);
5934 curr_data
|= BIT(6);
5936 WR_HARPOON(p_port
+ hp_scsidata_0
, curr_data
);
5938 curr_data
&= ~BIT(5);
5940 WR_HARPOON(p_port
+ hp_scsidata_0
, curr_data
);
5942 FPT_scwirod(p_port
, BIT(5)); /*Wait for DB5 to be released. */
5944 curr_data
&= ~(BIT(4) | BIT(3) | BIT(2) | BIT(1) | BIT(0)); /*Release data bits */
5945 curr_data
|= BIT(7);
5947 WR_HARPOON(p_port
+ hp_scsidata_0
, curr_data
);
5949 curr_data
&= ~BIT(6);
5951 WR_HARPOON(p_port
+ hp_scsidata_0
, curr_data
);
5953 FPT_scwirod(p_port
, BIT(6)); /*Wait for DB6 to be released. */
5958 /*---------------------------------------------------------------------
5960 * Function: FPT_scsendi
5962 * Description: Transfer our Identification string to determine if we
5963 * will be the dominant master.
5965 *---------------------------------------------------------------------*/
5967 static unsigned char FPT_scsendi(unsigned long p_port
,
5968 unsigned char p_id_string
[])
5970 unsigned char ret_data
, byte_cnt
, bit_cnt
, defer
;
5974 for (byte_cnt
= 0; byte_cnt
< ID_STRING_LENGTH
; byte_cnt
++) {
5976 for (bit_cnt
= 0x80; bit_cnt
!= 0; bit_cnt
>>= 1) {
5979 ret_data
= FPT_scxferc(p_port
, 00);
5981 else if (p_id_string
[byte_cnt
] & bit_cnt
)
5983 ret_data
= FPT_scxferc(p_port
, 02);
5987 ret_data
= FPT_scxferc(p_port
, 01);
5992 if ((ret_data
& 0x1C) == 0x10)
5993 return 0x00; /*End of isolation stage, we won! */
5995 if (ret_data
& 0x1C)
5998 if ((defer
) && (!(ret_data
& 0x1F)))
5999 return 0x01; /*End of isolation stage, we lost. */
6006 return 0x01; /*We lost */
6008 return 0; /*We WON! Yeeessss! */
6011 /*---------------------------------------------------------------------
6013 * Function: FPT_sciso
6015 * Description: Transfer the Identification string.
6017 *---------------------------------------------------------------------*/
6019 static unsigned char FPT_sciso(unsigned long p_port
,
6020 unsigned char p_id_string
[])
6022 unsigned char ret_data
, the_data
, byte_cnt
, bit_cnt
;
6026 for (byte_cnt
= 0; byte_cnt
< ID_STRING_LENGTH
; byte_cnt
++) {
6028 for (bit_cnt
= 0; bit_cnt
< 8; bit_cnt
++) {
6030 ret_data
= FPT_scxferc(p_port
, 0);
6032 if (ret_data
& 0xFC)
6038 if (ret_data
& BIT(1)) {
6043 if ((ret_data
& 0x1F) == 0) {
6045 if(bit_cnt != 0 || bit_cnt != 8)
6049 FPT_scxferc(p_port, SYNC_PTRN);
6050 FPT_scxferc(p_port, ASSIGN_ID);
6062 p_id_string
[byte_cnt
] = the_data
;
6069 /*---------------------------------------------------------------------
6071 * Function: FPT_scwirod
6073 * Description: Sample the SCSI data bus making sure the signal has been
6074 * deasserted for the correct number of consecutive samples.
6076 *---------------------------------------------------------------------*/
6078 static void FPT_scwirod(unsigned long p_port
, unsigned char p_data_bit
)
6083 while (i
< MAX_SCSI_TAR
) {
6085 if (RD_HARPOON(p_port
+ hp_scsidata_0
) & p_data_bit
)
6096 /*---------------------------------------------------------------------
6098 * Function: FPT_scwiros
6100 * Description: Sample the SCSI Signal lines making sure the signal has been
6101 * deasserted for the correct number of consecutive samples.
6103 *---------------------------------------------------------------------*/
6105 static void FPT_scwiros(unsigned long p_port
, unsigned char p_data_bit
)
6110 while (i
< MAX_SCSI_TAR
) {
6112 if (RD_HARPOON(p_port
+ hp_scsisig
) & p_data_bit
)
6123 /*---------------------------------------------------------------------
6125 * Function: FPT_scvalq
6127 * Description: Make sure we received a valid data byte.
6129 *---------------------------------------------------------------------*/
6131 static unsigned char FPT_scvalq(unsigned char p_quintet
)
6133 unsigned char count
;
6135 for (count
= 1; count
< 0x08; count
<<= 1) {
6136 if (!(p_quintet
& count
))
6140 if (p_quintet
& 0x18)
6147 /*---------------------------------------------------------------------
6149 * Function: FPT_scsell
6151 * Description: Select the specified device ID using a selection timeout
6152 * less than 4ms. If somebody responds then it is a legacy
6153 * drive and this ID must be marked as such.
6155 *---------------------------------------------------------------------*/
6157 static unsigned char FPT_scsell(unsigned long p_port
, unsigned char targ_id
)
6161 WR_HARPOON(p_port
+ hp_page_ctrl
,
6162 (RD_HARPOON(p_port
+ hp_page_ctrl
) | G_INT_DISABLE
));
6164 ARAM_ACCESS(p_port
);
6166 WR_HARPOON(p_port
+ hp_addstat
,
6167 (RD_HARPOON(p_port
+ hp_addstat
) | SCAM_TIMER
));
6168 WR_HARPOON(p_port
+ hp_seltimeout
, TO_4ms
);
6170 for (i
= p_port
+ CMD_STRT
; i
< p_port
+ CMD_STRT
+ 12; i
+= 2) {
6171 WRW_HARPOON(i
, (MPM_OP
+ ACOMMAND
));
6173 WRW_HARPOON(i
, (BRH_OP
+ ALWAYS
+ NP
));
6175 WRW_HARPOON((p_port
+ hp_intstat
),
6176 (RESET
| TIMEOUT
| SEL
| BUS_FREE
| AUTO_INT
));
6178 WR_HARPOON(p_port
+ hp_select_id
, targ_id
);
6180 WR_HARPOON(p_port
+ hp_portctrl_0
, SCSI_PORT
);
6181 WR_HARPOON(p_port
+ hp_autostart_3
, (SELECT
| CMD_ONLY_STRT
));
6182 WR_HARPOON(p_port
+ hp_scsictrl_0
, (SEL_TAR
| ENA_RESEL
));
6184 while (!(RDW_HARPOON((p_port
+ hp_intstat
)) &
6185 (RESET
| PROG_HLT
| TIMEOUT
| AUTO_INT
))) {
6188 if (RDW_HARPOON((p_port
+ hp_intstat
)) & RESET
)
6189 FPT_Wait(p_port
, TO_250ms
);
6191 DISABLE_AUTO(p_port
);
6193 WR_HARPOON(p_port
+ hp_addstat
,
6194 (RD_HARPOON(p_port
+ hp_addstat
) & ~SCAM_TIMER
));
6195 WR_HARPOON(p_port
+ hp_seltimeout
, TO_290ms
);
6197 SGRAM_ACCESS(p_port
);
6199 if (RDW_HARPOON((p_port
+ hp_intstat
)) & (RESET
| TIMEOUT
)) {
6201 WRW_HARPOON((p_port
+ hp_intstat
),
6202 (RESET
| TIMEOUT
| SEL
| BUS_FREE
| PHASE
));
6204 WR_HARPOON(p_port
+ hp_page_ctrl
,
6205 (RD_HARPOON(p_port
+ hp_page_ctrl
) &
6208 return 0; /*No legacy device */
6213 while (!(RDW_HARPOON((p_port
+ hp_intstat
)) & BUS_FREE
)) {
6214 if (RD_HARPOON(p_port
+ hp_scsisig
) & SCSI_REQ
) {
6215 WR_HARPOON(p_port
+ hp_scsisig
,
6216 (SCSI_ACK
+ S_ILL_PH
));
6221 WRW_HARPOON((p_port
+ hp_intstat
), CLR_ALL_INT_1
);
6223 WR_HARPOON(p_port
+ hp_page_ctrl
,
6224 (RD_HARPOON(p_port
+ hp_page_ctrl
) &
6227 return 1; /*Found one of them oldies! */
6231 /*---------------------------------------------------------------------
6233 * Function: FPT_scwtsel
6235 * Description: Wait to be selected by another SCAM initiator.
6237 *---------------------------------------------------------------------*/
6239 static void FPT_scwtsel(unsigned long p_port
)
6241 while (!(RDW_HARPOON((p_port
+ hp_intstat
)) & SCAM_SEL
)) {
6245 /*---------------------------------------------------------------------
6247 * Function: FPT_inisci
6249 * Description: Setup the data Structure with the info from the EEPROM.
6251 *---------------------------------------------------------------------*/
6253 static void FPT_inisci(unsigned char p_card
, unsigned long p_port
,
6254 unsigned char p_our_id
)
6256 unsigned char i
, k
, max_id
;
6257 unsigned short ee_data
;
6258 struct nvram_info
*pCurrNvRam
;
6260 pCurrNvRam
= FPT_BL_Card
[p_card
].pNvRamInfo
;
6262 if (RD_HARPOON(p_port
+ hp_page_ctrl
) & NARROW_SCSI_CARD
)
6269 for (i
= 0; i
< max_id
; i
++) {
6271 for (k
= 0; k
< 4; k
++)
6272 FPT_scamInfo
[i
].id_string
[k
] =
6273 pCurrNvRam
->niScamTbl
[i
][k
];
6274 for (k
= 4; k
< ID_STRING_LENGTH
; k
++)
6275 FPT_scamInfo
[i
].id_string
[k
] =
6276 (unsigned char)0x00;
6278 if (FPT_scamInfo
[i
].id_string
[0] == 0x00)
6279 FPT_scamInfo
[i
].state
= ID_UNUSED
; /*Default to unused ID. */
6281 FPT_scamInfo
[i
].state
= ID_UNASSIGNED
; /*Default to unassigned ID. */
6285 for (i
= 0; i
< max_id
; i
++) {
6286 for (k
= 0; k
< ID_STRING_LENGTH
; k
+= 2) {
6288 FPT_utilEERead(p_port
,
6290 short)((EE_SCAMBASE
/ 2) +
6291 (unsigned short)(i
*
6292 ((unsigned short)ID_STRING_LENGTH
/ 2)) + (unsigned short)(k
/ 2)));
6293 FPT_scamInfo
[i
].id_string
[k
] =
6294 (unsigned char)ee_data
;
6296 FPT_scamInfo
[i
].id_string
[k
+ 1] =
6297 (unsigned char)ee_data
;
6300 if ((FPT_scamInfo
[i
].id_string
[0] == 0x00) ||
6301 (FPT_scamInfo
[i
].id_string
[0] == 0xFF))
6303 FPT_scamInfo
[i
].state
= ID_UNUSED
; /*Default to unused ID. */
6306 FPT_scamInfo
[i
].state
= ID_UNASSIGNED
; /*Default to unassigned ID. */
6310 for (k
= 0; k
< ID_STRING_LENGTH
; k
++)
6311 FPT_scamInfo
[p_our_id
].id_string
[k
] = FPT_scamHAString
[k
];
6315 /*---------------------------------------------------------------------
6317 * Function: FPT_scmachid
6319 * Description: Match the Device ID string with our values stored in
6322 *---------------------------------------------------------------------*/
6324 static unsigned char FPT_scmachid(unsigned char p_card
,
6325 unsigned char p_id_string
[])
6328 unsigned char i
, k
, match
;
6330 for (i
= 0; i
< MAX_SCSI_TAR
; i
++) {
6334 for (k
= 0; k
< ID_STRING_LENGTH
; k
++) {
6335 if (p_id_string
[k
] != FPT_scamInfo
[i
].id_string
[k
])
6340 FPT_scamInfo
[i
].state
= ID_ASSIGNED
;
6346 if (p_id_string
[0] & BIT(5))
6351 if (((p_id_string
[0] & 0x06) == 0x02)
6352 || ((p_id_string
[0] & 0x06) == 0x04))
6353 match
= p_id_string
[1] & (unsigned char)0x1F;
6360 if (FPT_scamInfo
[match
].state
== ID_UNUSED
) {
6361 for (k
= 0; k
< ID_STRING_LENGTH
; k
++) {
6362 FPT_scamInfo
[match
].id_string
[k
] =
6366 FPT_scamInfo
[match
].state
= ID_ASSIGNED
;
6368 if (FPT_BL_Card
[p_card
].pNvRamInfo
== NULL
)
6369 FPT_BL_Card
[p_card
].globalFlags
|=
6377 if (match
== 0xFF) {
6378 if (p_id_string
[0] & BIT(5))
6381 match
= MAX_SCSI_TAR
- 1;
6385 if (p_id_string
[0] & BIT(7)) {
6386 return CLR_PRIORITY
;
6389 if (p_id_string
[0] & BIT(5))
6394 if (((p_id_string
[0] & 0x06) == 0x02)
6395 || ((p_id_string
[0] & 0x06) == 0x04))
6396 match
= p_id_string
[1] & (unsigned char)0x1F;
6404 if (FPT_scamInfo
[match
].state
== ID_UNASSIGNED
) {
6405 for (k
= 0; k
< ID_STRING_LENGTH
; k
++) {
6406 FPT_scamInfo
[match
].id_string
[k
] =
6410 FPT_scamInfo
[match
].id_string
[0] |= BIT(7);
6411 FPT_scamInfo
[match
].state
= ID_ASSIGNED
;
6412 if (FPT_BL_Card
[p_card
].pNvRamInfo
== NULL
)
6413 FPT_BL_Card
[p_card
].globalFlags
|=
6421 if (match
== 0xFF) {
6422 if (p_id_string
[0] & BIT(5))
6425 match
= MAX_SCSI_TAR
- 1;
6432 /*---------------------------------------------------------------------
6434 * Function: FPT_scsavdi
6436 * Description: Save off the device SCAM ID strings.
6438 *---------------------------------------------------------------------*/
6440 static void FPT_scsavdi(unsigned char p_card
, unsigned long p_port
)
6442 unsigned char i
, k
, max_id
;
6443 unsigned short ee_data
, sum_data
;
6447 for (i
= 1; i
< EE_SCAMBASE
/ 2; i
++) {
6448 sum_data
+= FPT_utilEERead(p_port
, i
);
6451 FPT_utilEEWriteOnOff(p_port
, 1); /* Enable write access to the EEPROM */
6453 if (RD_HARPOON(p_port
+ hp_page_ctrl
) & NARROW_SCSI_CARD
)
6459 for (i
= 0; i
< max_id
; i
++) {
6461 for (k
= 0; k
< ID_STRING_LENGTH
; k
+= 2) {
6462 ee_data
= FPT_scamInfo
[i
].id_string
[k
+ 1];
6464 ee_data
|= FPT_scamInfo
[i
].id_string
[k
];
6465 sum_data
+= ee_data
;
6466 FPT_utilEEWrite(p_port
, ee_data
,
6467 (unsigned short)((EE_SCAMBASE
/ 2) +
6468 (unsigned short)(i
*
6469 ((unsigned short)ID_STRING_LENGTH
/ 2)) + (unsigned short)(k
/ 2)));
6473 FPT_utilEEWrite(p_port
, sum_data
, EEPROM_CHECK_SUM
/ 2);
6474 FPT_utilEEWriteOnOff(p_port
, 0); /* Turn off write access */
6477 /*---------------------------------------------------------------------
6479 * Function: FPT_XbowInit
6481 * Description: Setup the Xbow for normal operation.
6483 *---------------------------------------------------------------------*/
6485 static void FPT_XbowInit(unsigned long port
, unsigned char ScamFlg
)
6489 i
= RD_HARPOON(port
+ hp_page_ctrl
);
6490 WR_HARPOON(port
+ hp_page_ctrl
, (unsigned char)(i
| G_INT_DISABLE
));
6492 WR_HARPOON(port
+ hp_scsireset
, 0x00);
6493 WR_HARPOON(port
+ hp_portctrl_1
, HOST_MODE8
);
6495 WR_HARPOON(port
+ hp_scsireset
, (DMA_RESET
| HPSCSI_RESET
| PROG_RESET
|
6498 WR_HARPOON(port
+ hp_scsireset
, SCSI_INI
);
6500 WR_HARPOON(port
+ hp_clkctrl_0
, CLKCTRL_DEFAULT
);
6502 WR_HARPOON(port
+ hp_scsisig
, 0x00); /* Clear any signals we might */
6503 WR_HARPOON(port
+ hp_scsictrl_0
, ENA_SCAM_SEL
);
6505 WRW_HARPOON((port
+ hp_intstat
), CLR_ALL_INT
);
6507 FPT_default_intena
= RESET
| RSEL
| PROG_HLT
| TIMEOUT
|
6508 BUS_FREE
| XFER_CNT_0
| AUTO_INT
;
6510 if ((ScamFlg
& SCAM_ENABLED
) && (ScamFlg
& SCAM_LEVEL2
))
6511 FPT_default_intena
|= SCAM_SEL
;
6513 WRW_HARPOON((port
+ hp_intena
), FPT_default_intena
);
6515 WR_HARPOON(port
+ hp_seltimeout
, TO_290ms
);
6517 /* Turn on SCSI_MODE8 for narrow cards to fix the
6518 strapping issue with the DUAL CHANNEL card */
6519 if (RD_HARPOON(port
+ hp_page_ctrl
) & NARROW_SCSI_CARD
)
6520 WR_HARPOON(port
+ hp_addstat
, SCSI_MODE8
);
6522 WR_HARPOON(port
+ hp_page_ctrl
, i
);
6526 /*---------------------------------------------------------------------
6528 * Function: FPT_BusMasterInit
6530 * Description: Initialize the BusMaster for normal operations.
6532 *---------------------------------------------------------------------*/
6534 static void FPT_BusMasterInit(unsigned long p_port
)
6537 WR_HARPOON(p_port
+ hp_sys_ctrl
, DRVR_RST
);
6538 WR_HARPOON(p_port
+ hp_sys_ctrl
, 0x00);
6540 WR_HARPOON(p_port
+ hp_host_blk_cnt
, XFER_BLK64
);
6542 WR_HARPOON(p_port
+ hp_bm_ctrl
, (BMCTRL_DEFAULT
));
6544 WR_HARPOON(p_port
+ hp_ee_ctrl
, (SCSI_TERM_ENA_H
));
6546 RD_HARPOON(p_port
+ hp_int_status
); /*Clear interrupts. */
6547 WR_HARPOON(p_port
+ hp_int_mask
, (INT_CMD_COMPL
| SCSI_INTERRUPT
));
6548 WR_HARPOON(p_port
+ hp_page_ctrl
, (RD_HARPOON(p_port
+ hp_page_ctrl
) &
6552 /*---------------------------------------------------------------------
6554 * Function: FPT_DiagEEPROM
6556 * Description: Verfiy checksum and 'Key' and initialize the EEPROM if
6559 *---------------------------------------------------------------------*/
6561 static void FPT_DiagEEPROM(unsigned long p_port
)
6563 unsigned short index
, temp
, max_wd_cnt
;
6565 if (RD_HARPOON(p_port
+ hp_page_ctrl
) & NARROW_SCSI_CARD
)
6566 max_wd_cnt
= EEPROM_WD_CNT
;
6568 max_wd_cnt
= EEPROM_WD_CNT
* 2;
6570 temp
= FPT_utilEERead(p_port
, FW_SIGNATURE
/ 2);
6572 if (temp
== 0x4641) {
6574 for (index
= 2; index
< max_wd_cnt
; index
++) {
6576 temp
+= FPT_utilEERead(p_port
, index
);
6580 if (temp
== FPT_utilEERead(p_port
, EEPROM_CHECK_SUM
/ 2)) {
6582 return; /*EEPROM is Okay so return now! */
6586 FPT_utilEEWriteOnOff(p_port
, (unsigned char)1);
6588 for (index
= 0; index
< max_wd_cnt
; index
++) {
6590 FPT_utilEEWrite(p_port
, 0x0000, index
);
6595 FPT_utilEEWrite(p_port
, 0x4641, FW_SIGNATURE
/ 2);
6597 FPT_utilEEWrite(p_port
, 0x3920, MODEL_NUMB_0
/ 2);
6599 FPT_utilEEWrite(p_port
, 0x3033, MODEL_NUMB_2
/ 2);
6601 FPT_utilEEWrite(p_port
, 0x2020, MODEL_NUMB_4
/ 2);
6603 FPT_utilEEWrite(p_port
, 0x70D3, SYSTEM_CONFIG
/ 2);
6605 FPT_utilEEWrite(p_port
, 0x0010, BIOS_CONFIG
/ 2);
6607 FPT_utilEEWrite(p_port
, 0x0003, SCAM_CONFIG
/ 2);
6609 FPT_utilEEWrite(p_port
, 0x0007, ADAPTER_SCSI_ID
/ 2);
6612 FPT_utilEEWrite(p_port
, 0x0000, IGNORE_B_SCAN
/ 2);
6614 FPT_utilEEWrite(p_port
, 0x0000, SEND_START_ENA
/ 2);
6616 FPT_utilEEWrite(p_port
, 0x0000, DEVICE_ENABLE
/ 2);
6619 FPT_utilEEWrite(p_port
, 0x4242, SYNC_RATE_TBL01
/ 2);
6621 FPT_utilEEWrite(p_port
, 0x4242, SYNC_RATE_TBL23
/ 2);
6623 FPT_utilEEWrite(p_port
, 0x4242, SYNC_RATE_TBL45
/ 2);
6625 FPT_utilEEWrite(p_port
, 0x4242, SYNC_RATE_TBL67
/ 2);
6627 FPT_utilEEWrite(p_port
, 0x4242, SYNC_RATE_TBL89
/ 2);
6629 FPT_utilEEWrite(p_port
, 0x4242, SYNC_RATE_TBLab
/ 2);
6631 FPT_utilEEWrite(p_port
, 0x4242, SYNC_RATE_TBLcd
/ 2);
6633 FPT_utilEEWrite(p_port
, 0x4242, SYNC_RATE_TBLef
/ 2);
6636 FPT_utilEEWrite(p_port
, 0x6C46, 64 / 2); /*PRODUCT ID */
6638 FPT_utilEEWrite(p_port
, 0x7361, 66 / 2); /* FlashPoint LT */
6640 FPT_utilEEWrite(p_port
, 0x5068, 68 / 2);
6642 FPT_utilEEWrite(p_port
, 0x696F, 70 / 2);
6644 FPT_utilEEWrite(p_port
, 0x746E, 72 / 2);
6646 FPT_utilEEWrite(p_port
, 0x4C20, 74 / 2);
6648 FPT_utilEEWrite(p_port
, 0x2054, 76 / 2);
6650 FPT_utilEEWrite(p_port
, 0x2020, 78 / 2);
6653 index
= ((EE_SCAMBASE
/ 2) + (7 * 16));
6654 FPT_utilEEWrite(p_port
, (0x0700 + TYPE_CODE0
), index
);
6655 temp
+= (0x0700 + TYPE_CODE0
);
6657 FPT_utilEEWrite(p_port
, 0x5542, index
); /*Vendor ID code */
6658 temp
+= 0x5542; /* BUSLOGIC */
6660 FPT_utilEEWrite(p_port
, 0x4C53, index
);
6663 FPT_utilEEWrite(p_port
, 0x474F, index
);
6666 FPT_utilEEWrite(p_port
, 0x4349, index
);
6669 FPT_utilEEWrite(p_port
, 0x5442, index
); /*Vendor unique code */
6670 temp
+= 0x5442; /* BT- 930 */
6672 FPT_utilEEWrite(p_port
, 0x202D, index
);
6675 FPT_utilEEWrite(p_port
, 0x3339, index
);
6677 index
++; /*Serial # */
6678 FPT_utilEEWrite(p_port
, 0x2030, index
); /* 01234567 */
6681 FPT_utilEEWrite(p_port
, 0x5453, index
);
6684 FPT_utilEEWrite(p_port
, 0x5645, index
);
6687 FPT_utilEEWrite(p_port
, 0x2045, index
);
6690 FPT_utilEEWrite(p_port
, 0x202F, index
);
6693 FPT_utilEEWrite(p_port
, 0x4F4A, index
);
6696 FPT_utilEEWrite(p_port
, 0x204E, index
);
6699 FPT_utilEEWrite(p_port
, 0x3539, index
);
6702 FPT_utilEEWrite(p_port
, temp
, EEPROM_CHECK_SUM
/ 2);
6704 FPT_utilEEWriteOnOff(p_port
, (unsigned char)0);
6708 /*---------------------------------------------------------------------
6710 * Function: Queue Search Select
6712 * Description: Try to find a new command to execute.
6714 *---------------------------------------------------------------------*/
6716 static void FPT_queueSearchSelect(struct sccb_card
*pCurrCard
,
6717 unsigned char p_card
)
6719 unsigned char scan_ptr
, lun
;
6720 struct sccb_mgr_tar_info
*currTar_Info
;
6721 struct sccb
*pOldSccb
;
6723 scan_ptr
= pCurrCard
->scanIndex
;
6725 currTar_Info
= &FPT_sccbMgrTbl
[p_card
][scan_ptr
];
6726 if ((pCurrCard
->globalFlags
& F_CONLUN_IO
) &&
6727 ((currTar_Info
->TarStatus
& TAR_TAG_Q_MASK
) !=
6729 if (currTar_Info
->TarSelQ_Cnt
!= 0) {
6732 if (scan_ptr
== MAX_SCSI_TAR
)
6735 for (lun
= 0; lun
< MAX_LUN
; lun
++) {
6736 if (currTar_Info
->TarLUNBusy
[lun
] == 0) {
6738 pCurrCard
->currentSCCB
=
6739 currTar_Info
->TarSelQ_Head
;
6743 currentSCCB
!= NULL
)
6746 currentSCCB
->Lun
)) {
6750 pCurrCard
->currentSCCB
=
6756 if (pCurrCard
->currentSCCB
==
6759 if (pOldSccb
!= NULL
) {
6802 pCurrCard
->scanIndex
= scan_ptr
;
6804 pCurrCard
->globalFlags
|=
6814 if (scan_ptr
== MAX_SCSI_TAR
) {
6820 if ((currTar_Info
->TarSelQ_Cnt
!= 0) &&
6821 (currTar_Info
->TarLUNBusy
[0] == 0)) {
6823 pCurrCard
->currentSCCB
=
6824 currTar_Info
->TarSelQ_Head
;
6826 currTar_Info
->TarSelQ_Head
=
6827 (struct sccb
*)(pCurrCard
->currentSCCB
)->
6830 if (currTar_Info
->TarSelQ_Head
== NULL
) {
6831 currTar_Info
->TarSelQ_Tail
= NULL
;
6832 currTar_Info
->TarSelQ_Cnt
= 0;
6834 currTar_Info
->TarSelQ_Cnt
--;
6835 currTar_Info
->TarSelQ_Head
->
6836 Sccb_backlink
= (struct sccb
*)NULL
;
6840 if (scan_ptr
== MAX_SCSI_TAR
)
6843 pCurrCard
->scanIndex
= scan_ptr
;
6845 pCurrCard
->globalFlags
|= F_NEW_SCCB_CMD
;
6852 if (scan_ptr
== MAX_SCSI_TAR
) {
6857 } while (scan_ptr
!= pCurrCard
->scanIndex
);
6860 /*---------------------------------------------------------------------
6862 * Function: Queue Select Fail
6864 * Description: Add the current SCCB to the head of the Queue.
6866 *---------------------------------------------------------------------*/
6868 static void FPT_queueSelectFail(struct sccb_card
*pCurrCard
,
6869 unsigned char p_card
)
6871 unsigned char thisTarg
;
6872 struct sccb_mgr_tar_info
*currTar_Info
;
6874 if (pCurrCard
->currentSCCB
!= NULL
) {
6876 (unsigned char)(((struct sccb
*)(pCurrCard
->currentSCCB
))->
6878 currTar_Info
= &FPT_sccbMgrTbl
[p_card
][thisTarg
];
6880 pCurrCard
->currentSCCB
->Sccb_backlink
= (struct sccb
*)NULL
;
6882 pCurrCard
->currentSCCB
->Sccb_forwardlink
=
6883 currTar_Info
->TarSelQ_Head
;
6885 if (currTar_Info
->TarSelQ_Cnt
== 0) {
6886 currTar_Info
->TarSelQ_Tail
= pCurrCard
->currentSCCB
;
6890 currTar_Info
->TarSelQ_Head
->Sccb_backlink
=
6891 pCurrCard
->currentSCCB
;
6894 currTar_Info
->TarSelQ_Head
= pCurrCard
->currentSCCB
;
6896 pCurrCard
->currentSCCB
= NULL
;
6897 currTar_Info
->TarSelQ_Cnt
++;
6901 /*---------------------------------------------------------------------
6903 * Function: Queue Command Complete
6905 * Description: Call the callback function with the current SCCB.
6907 *---------------------------------------------------------------------*/
6909 static void FPT_queueCmdComplete(struct sccb_card
*pCurrCard
,
6910 struct sccb
*p_sccb
, unsigned char p_card
)
6913 unsigned char i
, SCSIcmd
;
6914 CALL_BK_FN callback
;
6915 struct sccb_mgr_tar_info
*currTar_Info
;
6917 SCSIcmd
= p_sccb
->Cdb
[0];
6919 if (!(p_sccb
->Sccb_XferState
& F_ALL_XFERRED
)) {
6922 ControlByte
& (SCCB_DATA_XFER_OUT
| SCCB_DATA_XFER_IN
))
6923 && (p_sccb
->HostStatus
== SCCB_COMPLETE
)
6924 && (p_sccb
->TargetStatus
!= SSCHECK
))
6926 if ((SCSIcmd
== SCSI_READ
) ||
6927 (SCSIcmd
== SCSI_WRITE
) ||
6928 (SCSIcmd
== SCSI_READ_EXTENDED
) ||
6929 (SCSIcmd
== SCSI_WRITE_EXTENDED
) ||
6930 (SCSIcmd
== SCSI_WRITE_AND_VERIFY
) ||
6931 (SCSIcmd
== SCSI_START_STOP_UNIT
) ||
6932 (pCurrCard
->globalFlags
& F_NO_FILTER
)
6934 p_sccb
->HostStatus
= SCCB_DATA_UNDER_RUN
;
6937 if (p_sccb
->SccbStatus
== SCCB_IN_PROCESS
) {
6938 if (p_sccb
->HostStatus
|| p_sccb
->TargetStatus
)
6939 p_sccb
->SccbStatus
= SCCB_ERROR
;
6941 p_sccb
->SccbStatus
= SCCB_SUCCESS
;
6944 if (p_sccb
->Sccb_XferState
& F_AUTO_SENSE
) {
6946 p_sccb
->CdbLength
= p_sccb
->Save_CdbLen
;
6947 for (i
= 0; i
< 6; i
++) {
6948 p_sccb
->Cdb
[i
] = p_sccb
->Save_Cdb
[i
];
6952 if ((p_sccb
->OperationCode
== RESIDUAL_SG_COMMAND
) ||
6953 (p_sccb
->OperationCode
== RESIDUAL_COMMAND
)) {
6955 FPT_utilUpdateResidual(p_sccb
);
6958 pCurrCard
->cmdCounter
--;
6959 if (!pCurrCard
->cmdCounter
) {
6961 if (pCurrCard
->globalFlags
& F_GREEN_PC
) {
6962 WR_HARPOON(pCurrCard
->ioPort
+ hp_clkctrl_0
,
6963 (PWR_DWN
| CLKCTRL_DEFAULT
));
6964 WR_HARPOON(pCurrCard
->ioPort
+ hp_sys_ctrl
, STOP_CLK
);
6967 WR_HARPOON(pCurrCard
->ioPort
+ hp_semaphore
,
6968 (RD_HARPOON(pCurrCard
->ioPort
+ hp_semaphore
) &
6973 if (pCurrCard
->discQCount
!= 0) {
6974 currTar_Info
= &FPT_sccbMgrTbl
[p_card
][p_sccb
->TargID
];
6975 if (((pCurrCard
->globalFlags
& F_CONLUN_IO
) &&
6976 ((currTar_Info
->TarStatus
& TAR_TAG_Q_MASK
) !=
6978 pCurrCard
->discQCount
--;
6979 pCurrCard
->discQ_Tbl
[currTar_Info
->
6980 LunDiscQ_Idx
[p_sccb
->Lun
]] = NULL
;
6982 if (p_sccb
->Sccb_tag
) {
6983 pCurrCard
->discQCount
--;
6984 pCurrCard
->discQ_Tbl
[p_sccb
->Sccb_tag
] = NULL
;
6986 pCurrCard
->discQCount
--;
6987 pCurrCard
->discQ_Tbl
[currTar_Info
->
6988 LunDiscQ_Idx
[0]] = NULL
;
6994 callback
= (CALL_BK_FN
) p_sccb
->SccbCallback
;
6996 pCurrCard
->globalFlags
|= F_NEW_SCCB_CMD
;
6997 pCurrCard
->currentSCCB
= NULL
;
7000 /*---------------------------------------------------------------------
7002 * Function: Queue Disconnect
7004 * Description: Add SCCB to our disconnect array.
7006 *---------------------------------------------------------------------*/
7007 static void FPT_queueDisconnect(struct sccb
*p_sccb
, unsigned char p_card
)
7009 struct sccb_mgr_tar_info
*currTar_Info
;
7011 currTar_Info
= &FPT_sccbMgrTbl
[p_card
][p_sccb
->TargID
];
7013 if (((FPT_BL_Card
[p_card
].globalFlags
& F_CONLUN_IO
) &&
7014 ((currTar_Info
->TarStatus
& TAR_TAG_Q_MASK
) != TAG_Q_TRYING
))) {
7015 FPT_BL_Card
[p_card
].discQ_Tbl
[currTar_Info
->
7016 LunDiscQ_Idx
[p_sccb
->Lun
]] =
7019 if (p_sccb
->Sccb_tag
) {
7020 FPT_BL_Card
[p_card
].discQ_Tbl
[p_sccb
->Sccb_tag
] =
7022 FPT_sccbMgrTbl
[p_card
][p_sccb
->TargID
].TarLUNBusy
[0] =
7024 FPT_sccbMgrTbl
[p_card
][p_sccb
->TargID
].TarTagQ_Cnt
++;
7026 FPT_BL_Card
[p_card
].discQ_Tbl
[currTar_Info
->
7027 LunDiscQ_Idx
[0]] = p_sccb
;
7030 FPT_BL_Card
[p_card
].currentSCCB
= NULL
;
7033 /*---------------------------------------------------------------------
7035 * Function: Queue Flush SCCB
7037 * Description: Flush all SCCB's back to the host driver for this target.
7039 *---------------------------------------------------------------------*/
7041 static void FPT_queueFlushSccb(unsigned char p_card
, unsigned char error_code
)
7043 unsigned char qtag
, thisTarg
;
7044 struct sccb
*currSCCB
;
7045 struct sccb_mgr_tar_info
*currTar_Info
;
7047 currSCCB
= FPT_BL_Card
[p_card
].currentSCCB
;
7048 if (currSCCB
!= NULL
) {
7049 thisTarg
= (unsigned char)currSCCB
->TargID
;
7050 currTar_Info
= &FPT_sccbMgrTbl
[p_card
][thisTarg
];
7052 for (qtag
= 0; qtag
< QUEUE_DEPTH
; qtag
++) {
7054 if (FPT_BL_Card
[p_card
].discQ_Tbl
[qtag
] &&
7055 (FPT_BL_Card
[p_card
].discQ_Tbl
[qtag
]->TargID
==
7058 FPT_BL_Card
[p_card
].discQ_Tbl
[qtag
]->
7059 HostStatus
= (unsigned char)error_code
;
7061 FPT_queueCmdComplete(&FPT_BL_Card
[p_card
],
7062 FPT_BL_Card
[p_card
].
7063 discQ_Tbl
[qtag
], p_card
);
7065 FPT_BL_Card
[p_card
].discQ_Tbl
[qtag
] = NULL
;
7066 currTar_Info
->TarTagQ_Cnt
--;
7074 /*---------------------------------------------------------------------
7076 * Function: Queue Flush Target SCCB
7078 * Description: Flush all SCCB's back to the host driver for this target.
7080 *---------------------------------------------------------------------*/
7082 static void FPT_queueFlushTargSccb(unsigned char p_card
, unsigned char thisTarg
,
7083 unsigned char error_code
)
7086 struct sccb_mgr_tar_info
*currTar_Info
;
7088 currTar_Info
= &FPT_sccbMgrTbl
[p_card
][thisTarg
];
7090 for (qtag
= 0; qtag
< QUEUE_DEPTH
; qtag
++) {
7092 if (FPT_BL_Card
[p_card
].discQ_Tbl
[qtag
] &&
7093 (FPT_BL_Card
[p_card
].discQ_Tbl
[qtag
]->TargID
== thisTarg
)) {
7095 FPT_BL_Card
[p_card
].discQ_Tbl
[qtag
]->HostStatus
=
7096 (unsigned char)error_code
;
7098 FPT_queueCmdComplete(&FPT_BL_Card
[p_card
],
7099 FPT_BL_Card
[p_card
].
7100 discQ_Tbl
[qtag
], p_card
);
7102 FPT_BL_Card
[p_card
].discQ_Tbl
[qtag
] = NULL
;
7103 currTar_Info
->TarTagQ_Cnt
--;
7110 static void FPT_queueAddSccb(struct sccb
*p_SCCB
, unsigned char p_card
)
7112 struct sccb_mgr_tar_info
*currTar_Info
;
7113 currTar_Info
= &FPT_sccbMgrTbl
[p_card
][p_SCCB
->TargID
];
7115 p_SCCB
->Sccb_forwardlink
= NULL
;
7117 p_SCCB
->Sccb_backlink
= currTar_Info
->TarSelQ_Tail
;
7119 if (currTar_Info
->TarSelQ_Cnt
== 0) {
7121 currTar_Info
->TarSelQ_Head
= p_SCCB
;
7126 currTar_Info
->TarSelQ_Tail
->Sccb_forwardlink
= p_SCCB
;
7129 currTar_Info
->TarSelQ_Tail
= p_SCCB
;
7130 currTar_Info
->TarSelQ_Cnt
++;
7133 /*---------------------------------------------------------------------
7135 * Function: Queue Find SCCB
7137 * Description: Search the target select Queue for this SCCB, and
7138 * remove it if found.
7140 *---------------------------------------------------------------------*/
7142 static unsigned char FPT_queueFindSccb(struct sccb
*p_SCCB
,
7143 unsigned char p_card
)
7146 struct sccb_mgr_tar_info
*currTar_Info
;
7148 currTar_Info
= &FPT_sccbMgrTbl
[p_card
][p_SCCB
->TargID
];
7150 q_ptr
= currTar_Info
->TarSelQ_Head
;
7152 while (q_ptr
!= NULL
) {
7154 if (q_ptr
== p_SCCB
) {
7156 if (currTar_Info
->TarSelQ_Head
== q_ptr
) {
7158 currTar_Info
->TarSelQ_Head
=
7159 q_ptr
->Sccb_forwardlink
;
7162 if (currTar_Info
->TarSelQ_Tail
== q_ptr
) {
7164 currTar_Info
->TarSelQ_Tail
=
7165 q_ptr
->Sccb_backlink
;
7168 if (q_ptr
->Sccb_forwardlink
!= NULL
) {
7169 q_ptr
->Sccb_forwardlink
->Sccb_backlink
=
7170 q_ptr
->Sccb_backlink
;
7173 if (q_ptr
->Sccb_backlink
!= NULL
) {
7174 q_ptr
->Sccb_backlink
->Sccb_forwardlink
=
7175 q_ptr
->Sccb_forwardlink
;
7178 currTar_Info
->TarSelQ_Cnt
--;
7184 q_ptr
= q_ptr
->Sccb_forwardlink
;
7192 /*---------------------------------------------------------------------
7194 * Function: Utility Update Residual Count
7196 * Description: Update the XferCnt to the remaining byte count.
7197 * If we transferred all the data then just write zero.
7198 * If Non-SG transfer then report Total Cnt - Actual Transfer
7199 * Cnt. For SG transfers add the count fields of all
7200 * remaining SG elements, as well as any partial remaining
7203 *---------------------------------------------------------------------*/
7205 static void FPT_utilUpdateResidual(struct sccb
*p_SCCB
)
7207 unsigned long partial_cnt
;
7208 unsigned int sg_index
;
7209 unsigned long *sg_ptr
;
7211 if (p_SCCB
->Sccb_XferState
& F_ALL_XFERRED
) {
7213 p_SCCB
->DataLength
= 0x0000;
7216 else if (p_SCCB
->Sccb_XferState
& F_SG_XFER
) {
7218 partial_cnt
= 0x0000;
7220 sg_index
= p_SCCB
->Sccb_sgseg
;
7222 sg_ptr
= (unsigned long *)p_SCCB
->DataPointer
;
7224 if (p_SCCB
->Sccb_SGoffset
) {
7226 partial_cnt
= p_SCCB
->Sccb_SGoffset
;
7230 while (((unsigned long)sg_index
*
7231 (unsigned long)SG_ELEMENT_SIZE
) < p_SCCB
->DataLength
) {
7233 partial_cnt
+= *(sg_ptr
+ (sg_index
* 2));
7237 p_SCCB
->DataLength
= partial_cnt
;
7242 p_SCCB
->DataLength
-= p_SCCB
->Sccb_ATC
;
7246 /*---------------------------------------------------------------------
7248 * Function: Wait 1 Second
7250 * Description: Wait for 1 second.
7252 *---------------------------------------------------------------------*/
7254 static void FPT_Wait1Second(unsigned long p_port
)
7258 for (i
= 0; i
< 4; i
++) {
7260 FPT_Wait(p_port
, TO_250ms
);
7262 if ((RD_HARPOON(p_port
+ hp_scsictrl_0
) & SCSI_RST
))
7265 if ((RDW_HARPOON((p_port
+ hp_intstat
)) & SCAM_SEL
))
7270 /*---------------------------------------------------------------------
7272 * Function: FPT_Wait
7274 * Description: Wait the desired delay.
7276 *---------------------------------------------------------------------*/
7278 static void FPT_Wait(unsigned long p_port
, unsigned char p_delay
)
7280 unsigned char old_timer
;
7281 unsigned char green_flag
;
7283 old_timer
= RD_HARPOON(p_port
+ hp_seltimeout
);
7285 green_flag
= RD_HARPOON(p_port
+ hp_clkctrl_0
);
7286 WR_HARPOON(p_port
+ hp_clkctrl_0
, CLKCTRL_DEFAULT
);
7288 WR_HARPOON(p_port
+ hp_seltimeout
, p_delay
);
7289 WRW_HARPOON((p_port
+ hp_intstat
), TIMEOUT
);
7290 WRW_HARPOON((p_port
+ hp_intena
), (FPT_default_intena
& ~TIMEOUT
));
7292 WR_HARPOON(p_port
+ hp_portctrl_0
,
7293 (RD_HARPOON(p_port
+ hp_portctrl_0
) | START_TO
));
7295 while (!(RDW_HARPOON((p_port
+ hp_intstat
)) & TIMEOUT
)) {
7297 if ((RD_HARPOON(p_port
+ hp_scsictrl_0
) & SCSI_RST
))
7300 if ((RDW_HARPOON((p_port
+ hp_intstat
)) & SCAM_SEL
))
7304 WR_HARPOON(p_port
+ hp_portctrl_0
,
7305 (RD_HARPOON(p_port
+ hp_portctrl_0
) & ~START_TO
));
7307 WRW_HARPOON((p_port
+ hp_intstat
), TIMEOUT
);
7308 WRW_HARPOON((p_port
+ hp_intena
), FPT_default_intena
);
7310 WR_HARPOON(p_port
+ hp_clkctrl_0
, green_flag
);
7312 WR_HARPOON(p_port
+ hp_seltimeout
, old_timer
);
7315 /*---------------------------------------------------------------------
7317 * Function: Enable/Disable Write to EEPROM
7319 * Description: The EEPROM must first be enabled for writes
7320 * A total of 9 clocks are needed.
7322 *---------------------------------------------------------------------*/
7324 static void FPT_utilEEWriteOnOff(unsigned long p_port
, unsigned char p_mode
)
7326 unsigned char ee_value
;
7329 (unsigned char)(RD_HARPOON(p_port
+ hp_ee_ctrl
) &
7330 (EXT_ARB_ACK
| SCSI_TERM_ENA_H
));
7334 FPT_utilEESendCmdAddr(p_port
, EWEN
, EWEN_ADDR
);
7338 FPT_utilEESendCmdAddr(p_port
, EWDS
, EWDS_ADDR
);
7340 WR_HARPOON(p_port
+ hp_ee_ctrl
, (ee_value
| SEE_MS
)); /*Turn off CS */
7341 WR_HARPOON(p_port
+ hp_ee_ctrl
, ee_value
); /*Turn off Master Select */
7344 /*---------------------------------------------------------------------
7346 * Function: Write EEPROM
7348 * Description: Write a word to the EEPROM at the specified
7351 *---------------------------------------------------------------------*/
7353 static void FPT_utilEEWrite(unsigned long p_port
, unsigned short ee_data
,
7354 unsigned short ee_addr
)
7357 unsigned char ee_value
;
7362 char)((RD_HARPOON(p_port
+ hp_ee_ctrl
) &
7363 (EXT_ARB_ACK
| SCSI_TERM_ENA_H
)) | (SEE_MS
| SEE_CS
));
7365 FPT_utilEESendCmdAddr(p_port
, EE_WRITE
, ee_addr
);
7367 ee_value
|= (SEE_MS
+ SEE_CS
);
7369 for (i
= 0x8000; i
!= 0; i
>>= 1) {
7374 ee_value
&= ~SEE_DO
;
7376 WR_HARPOON(p_port
+ hp_ee_ctrl
, ee_value
);
7377 WR_HARPOON(p_port
+ hp_ee_ctrl
, ee_value
);
7378 ee_value
|= SEE_CLK
; /* Clock data! */
7379 WR_HARPOON(p_port
+ hp_ee_ctrl
, ee_value
);
7380 WR_HARPOON(p_port
+ hp_ee_ctrl
, ee_value
);
7381 ee_value
&= ~SEE_CLK
;
7382 WR_HARPOON(p_port
+ hp_ee_ctrl
, ee_value
);
7383 WR_HARPOON(p_port
+ hp_ee_ctrl
, ee_value
);
7385 ee_value
&= (EXT_ARB_ACK
| SCSI_TERM_ENA_H
);
7386 WR_HARPOON(p_port
+ hp_ee_ctrl
, (ee_value
| SEE_MS
));
7388 FPT_Wait(p_port
, TO_10ms
);
7390 WR_HARPOON(p_port
+ hp_ee_ctrl
, (ee_value
| SEE_MS
| SEE_CS
)); /* Set CS to EEPROM */
7391 WR_HARPOON(p_port
+ hp_ee_ctrl
, (ee_value
| SEE_MS
)); /* Turn off CS */
7392 WR_HARPOON(p_port
+ hp_ee_ctrl
, ee_value
); /* Turn off Master Select */
7395 /*---------------------------------------------------------------------
7397 * Function: Read EEPROM
7399 * Description: Read a word from the EEPROM at the desired
7402 *---------------------------------------------------------------------*/
7404 static unsigned short FPT_utilEERead(unsigned long p_port
,
7405 unsigned short ee_addr
)
7407 unsigned short i
, ee_data1
, ee_data2
;
7410 ee_data1
= FPT_utilEEReadOrg(p_port
, ee_addr
);
7412 ee_data2
= FPT_utilEEReadOrg(p_port
, ee_addr
);
7414 if (ee_data1
== ee_data2
)
7417 ee_data1
= ee_data2
;
7425 /*---------------------------------------------------------------------
7427 * Function: Read EEPROM Original
7429 * Description: Read a word from the EEPROM at the desired
7432 *---------------------------------------------------------------------*/
7434 static unsigned short FPT_utilEEReadOrg(unsigned long p_port
,
7435 unsigned short ee_addr
)
7438 unsigned char ee_value
;
7439 unsigned short i
, ee_data
;
7443 char)((RD_HARPOON(p_port
+ hp_ee_ctrl
) &
7444 (EXT_ARB_ACK
| SCSI_TERM_ENA_H
)) | (SEE_MS
| SEE_CS
));
7446 FPT_utilEESendCmdAddr(p_port
, EE_READ
, ee_addr
);
7448 ee_value
|= (SEE_MS
+ SEE_CS
);
7451 for (i
= 1; i
<= 16; i
++) {
7453 ee_value
|= SEE_CLK
; /* Clock data! */
7454 WR_HARPOON(p_port
+ hp_ee_ctrl
, ee_value
);
7455 WR_HARPOON(p_port
+ hp_ee_ctrl
, ee_value
);
7456 ee_value
&= ~SEE_CLK
;
7457 WR_HARPOON(p_port
+ hp_ee_ctrl
, ee_value
);
7458 WR_HARPOON(p_port
+ hp_ee_ctrl
, ee_value
);
7462 if (RD_HARPOON(p_port
+ hp_ee_ctrl
) & SEE_DI
)
7466 ee_value
&= ~(SEE_MS
+ SEE_CS
);
7467 WR_HARPOON(p_port
+ hp_ee_ctrl
, (ee_value
| SEE_MS
)); /*Turn off CS */
7468 WR_HARPOON(p_port
+ hp_ee_ctrl
, ee_value
); /*Turn off Master Select */
7473 /*---------------------------------------------------------------------
7475 * Function: Send EE command and Address to the EEPROM
7477 * Description: Transfers the correct command and sends the address
7480 *---------------------------------------------------------------------*/
7482 static void FPT_utilEESendCmdAddr(unsigned long p_port
, unsigned char ee_cmd
,
7483 unsigned short ee_addr
)
7485 unsigned char ee_value
;
7486 unsigned char narrow_flg
;
7491 (unsigned char)(RD_HARPOON(p_port
+ hp_page_ctrl
) &
7495 WR_HARPOON(p_port
+ hp_ee_ctrl
, ee_value
);
7497 ee_value
|= SEE_CS
; /* Set CS to EEPROM */
7498 WR_HARPOON(p_port
+ hp_ee_ctrl
, ee_value
);
7500 for (i
= 0x04; i
!= 0; i
>>= 1) {
7505 ee_value
&= ~SEE_DO
;
7507 WR_HARPOON(p_port
+ hp_ee_ctrl
, ee_value
);
7508 WR_HARPOON(p_port
+ hp_ee_ctrl
, ee_value
);
7509 ee_value
|= SEE_CLK
; /* Clock data! */
7510 WR_HARPOON(p_port
+ hp_ee_ctrl
, ee_value
);
7511 WR_HARPOON(p_port
+ hp_ee_ctrl
, ee_value
);
7512 ee_value
&= ~SEE_CLK
;
7513 WR_HARPOON(p_port
+ hp_ee_ctrl
, ee_value
);
7514 WR_HARPOON(p_port
+ hp_ee_ctrl
, ee_value
);
7528 ee_value
&= ~SEE_DO
;
7530 WR_HARPOON(p_port
+ hp_ee_ctrl
, ee_value
);
7531 WR_HARPOON(p_port
+ hp_ee_ctrl
, ee_value
);
7532 ee_value
|= SEE_CLK
; /* Clock data! */
7533 WR_HARPOON(p_port
+ hp_ee_ctrl
, ee_value
);
7534 WR_HARPOON(p_port
+ hp_ee_ctrl
, ee_value
);
7535 ee_value
&= ~SEE_CLK
;
7536 WR_HARPOON(p_port
+ hp_ee_ctrl
, ee_value
);
7537 WR_HARPOON(p_port
+ hp_ee_ctrl
, ee_value
);
7543 static unsigned short FPT_CalcCrc16(unsigned char buffer
[])
7545 unsigned short crc
= 0;
7548 for (i
= 0; i
< ID_STRING_LENGTH
; i
++) {
7549 ch
= (unsigned short)buffer
[i
];
7550 for (j
= 0; j
< 8; j
++) {
7552 crc
= (crc
>> 1) ^ CRCMASK
;
7561 static unsigned char FPT_CalcLrc(unsigned char buffer
[])
7566 for (i
= 0; i
< ID_STRING_LENGTH
; i
++)
7572 The following inline definitions avoid type conflicts.
7575 static inline unsigned char
7576 FlashPoint__ProbeHostAdapter(struct FlashPoint_Info
*FlashPointInfo
)
7578 return FlashPoint_ProbeHostAdapter((struct sccb_mgr_info
*)
7582 static inline FlashPoint_CardHandle_T
7583 FlashPoint__HardwareResetHostAdapter(struct FlashPoint_Info
*FlashPointInfo
)
7585 return FlashPoint_HardwareResetHostAdapter((struct sccb_mgr_info
*)
7590 FlashPoint__ReleaseHostAdapter(FlashPoint_CardHandle_T CardHandle
)
7592 FlashPoint_ReleaseHostAdapter(CardHandle
);
7596 FlashPoint__StartCCB(FlashPoint_CardHandle_T CardHandle
,
7597 struct BusLogic_CCB
*CCB
)
7599 FlashPoint_StartCCB(CardHandle
, (struct sccb
*)CCB
);
7603 FlashPoint__AbortCCB(FlashPoint_CardHandle_T CardHandle
,
7604 struct BusLogic_CCB
*CCB
)
7606 FlashPoint_AbortCCB(CardHandle
, (struct sccb
*)CCB
);
7610 FlashPoint__InterruptPending(FlashPoint_CardHandle_T CardHandle
)
7612 return FlashPoint_InterruptPending(CardHandle
);
7616 FlashPoint__HandleInterrupt(FlashPoint_CardHandle_T CardHandle
)
7618 return FlashPoint_HandleInterrupt(CardHandle
);
7621 #define FlashPoint_ProbeHostAdapter FlashPoint__ProbeHostAdapter
7622 #define FlashPoint_HardwareResetHostAdapter FlashPoint__HardwareResetHostAdapter
7623 #define FlashPoint_ReleaseHostAdapter FlashPoint__ReleaseHostAdapter
7624 #define FlashPoint_StartCCB FlashPoint__StartCCB
7625 #define FlashPoint_AbortCCB FlashPoint__AbortCCB
7626 #define FlashPoint_InterruptPending FlashPoint__InterruptPending
7627 #define FlashPoint_HandleInterrupt FlashPoint__HandleInterrupt
7629 #else /* !CONFIG_SCSI_FLASHPOINT */
7632 Define prototypes for the FlashPoint SCCB Manager Functions.
7635 extern unsigned char FlashPoint_ProbeHostAdapter(struct FlashPoint_Info
*);
7636 extern FlashPoint_CardHandle_T
7637 FlashPoint_HardwareResetHostAdapter(struct FlashPoint_Info
*);
7638 extern void FlashPoint_StartCCB(FlashPoint_CardHandle_T
, struct BusLogic_CCB
*);
7639 extern int FlashPoint_AbortCCB(FlashPoint_CardHandle_T
, struct BusLogic_CCB
*);
7640 extern bool FlashPoint_InterruptPending(FlashPoint_CardHandle_T
);
7641 extern int FlashPoint_HandleInterrupt(FlashPoint_CardHandle_T
);
7642 extern void FlashPoint_ReleaseHostAdapter(FlashPoint_CardHandle_T
);
7644 #endif /* CONFIG_SCSI_FLASHPOINT */