2 ds1621.c - Part of lm_sensors, Linux kernel modules for hardware
4 Christian W. Zuckschwerdt <zany@triq.net> 2000-11-23
5 based on lm75.c by Frodo Looijaard <frodol@dds.nl>
6 Ported to Linux 2.6 by Aurelien Jarno <aurelien@aurel32.net> with
7 the help of Jean Delvare <khali@linux-fr.org>
9 This program is free software; you can redistribute it and/or modify
10 it under the terms of the GNU General Public License as published by
11 the Free Software Foundation; either version 2 of the License, or
12 (at your option) any later version.
14 This program is distributed in the hope that it will be useful,
15 but WITHOUT ANY WARRANTY; without even the implied warranty of
16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 GNU General Public License for more details.
19 You should have received a copy of the GNU General Public License
20 along with this program; if not, write to the Free Software
21 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24 #include <linux/module.h>
25 #include <linux/init.h>
26 #include <linux/slab.h>
27 #include <linux/jiffies.h>
28 #include <linux/i2c.h>
29 #include <linux/hwmon.h>
30 #include <linux/hwmon-sysfs.h>
31 #include <linux/err.h>
32 #include <linux/mutex.h>
33 #include <linux/sysfs.h>
36 /* Addresses to scan */
37 static const unsigned short normal_i2c
[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
38 0x4d, 0x4e, 0x4f, I2C_CLIENT_END
};
40 /* Insmod parameters */
41 I2C_CLIENT_INSMOD_1(ds1621
);
42 static int polarity
= -1;
43 module_param(polarity
, int, 0);
44 MODULE_PARM_DESC(polarity
, "Output's polarity: 0 = active high, 1 = active low");
46 /* Many DS1621 constants specified below */
47 /* Config register used for detection */
49 /* |Done|THF |TLF |NVB | X | X |POL |1SHOT| */
50 #define DS1621_REG_CONFIG_NVB 0x10
51 #define DS1621_REG_CONFIG_POLARITY 0x02
52 #define DS1621_REG_CONFIG_1SHOT 0x01
53 #define DS1621_REG_CONFIG_DONE 0x80
55 /* The DS1621 registers */
56 static const u8 DS1621_REG_TEMP
[3] = {
57 0xAA, /* input, word, RO */
58 0xA2, /* min, word, RW */
59 0xA1, /* max, word, RW */
61 #define DS1621_REG_CONF 0xAC /* byte, RW */
62 #define DS1621_COM_START 0xEE /* no data */
63 #define DS1621_COM_STOP 0x22 /* no data */
65 /* The DS1621 configuration register */
66 #define DS1621_ALARM_TEMP_HIGH 0x40
67 #define DS1621_ALARM_TEMP_LOW 0x20
70 #define ALARMS_FROM_REG(val) ((val) & \
71 (DS1621_ALARM_TEMP_HIGH | DS1621_ALARM_TEMP_LOW))
73 /* Each client has this additional data */
75 struct device
*hwmon_dev
;
76 struct mutex update_lock
;
77 char valid
; /* !=0 if following fields are valid */
78 unsigned long last_updated
; /* In jiffies */
80 u16 temp
[3]; /* Register values, word */
81 u8 conf
; /* Register encoding, combined */
84 /* Temperature registers are word-sized.
85 DS1621 uses a high-byte first convention, which is exactly opposite to
86 the SMBus standard. */
87 static int ds1621_read_temp(struct i2c_client
*client
, u8 reg
)
91 ret
= i2c_smbus_read_word_data(client
, reg
);
97 static int ds1621_write_temp(struct i2c_client
*client
, u8 reg
, u16 value
)
99 return i2c_smbus_write_word_data(client
, reg
, swab16(value
));
102 static void ds1621_init_client(struct i2c_client
*client
)
106 new_conf
= conf
= i2c_smbus_read_byte_data(client
, DS1621_REG_CONF
);
107 /* switch to continuous conversion mode */
108 new_conf
&= ~DS1621_REG_CONFIG_1SHOT
;
110 /* setup output polarity */
112 new_conf
&= ~DS1621_REG_CONFIG_POLARITY
;
113 else if (polarity
== 1)
114 new_conf
|= DS1621_REG_CONFIG_POLARITY
;
116 if (conf
!= new_conf
)
117 i2c_smbus_write_byte_data(client
, DS1621_REG_CONF
, new_conf
);
119 /* start conversion */
120 i2c_smbus_write_byte(client
, DS1621_COM_START
);
123 static struct ds1621_data
*ds1621_update_client(struct device
*dev
)
125 struct i2c_client
*client
= to_i2c_client(dev
);
126 struct ds1621_data
*data
= i2c_get_clientdata(client
);
129 mutex_lock(&data
->update_lock
);
131 if (time_after(jiffies
, data
->last_updated
+ HZ
+ HZ
/ 2)
135 dev_dbg(&client
->dev
, "Starting ds1621 update\n");
137 data
->conf
= i2c_smbus_read_byte_data(client
, DS1621_REG_CONF
);
139 for (i
= 0; i
< ARRAY_SIZE(data
->temp
); i
++)
140 data
->temp
[i
] = ds1621_read_temp(client
,
143 /* reset alarms if necessary */
144 new_conf
= data
->conf
;
145 if (data
->temp
[0] > data
->temp
[1]) /* input > min */
146 new_conf
&= ~DS1621_ALARM_TEMP_LOW
;
147 if (data
->temp
[0] < data
->temp
[2]) /* input < max */
148 new_conf
&= ~DS1621_ALARM_TEMP_HIGH
;
149 if (data
->conf
!= new_conf
)
150 i2c_smbus_write_byte_data(client
, DS1621_REG_CONF
,
153 data
->last_updated
= jiffies
;
157 mutex_unlock(&data
->update_lock
);
162 static ssize_t
show_temp(struct device
*dev
, struct device_attribute
*da
,
165 struct sensor_device_attribute
*attr
= to_sensor_dev_attr(da
);
166 struct ds1621_data
*data
= ds1621_update_client(dev
);
167 return sprintf(buf
, "%d\n",
168 LM75_TEMP_FROM_REG(data
->temp
[attr
->index
]));
171 static ssize_t
set_temp(struct device
*dev
, struct device_attribute
*da
,
172 const char *buf
, size_t count
)
174 struct sensor_device_attribute
*attr
= to_sensor_dev_attr(da
);
175 struct i2c_client
*client
= to_i2c_client(dev
);
176 struct ds1621_data
*data
= i2c_get_clientdata(client
);
177 u16 val
= LM75_TEMP_TO_REG(simple_strtol(buf
, NULL
, 10));
179 mutex_lock(&data
->update_lock
);
180 data
->temp
[attr
->index
] = val
;
181 ds1621_write_temp(client
, DS1621_REG_TEMP
[attr
->index
],
182 data
->temp
[attr
->index
]);
183 mutex_unlock(&data
->update_lock
);
187 static ssize_t
show_alarms(struct device
*dev
, struct device_attribute
*da
,
190 struct ds1621_data
*data
= ds1621_update_client(dev
);
191 return sprintf(buf
, "%d\n", ALARMS_FROM_REG(data
->conf
));
194 static ssize_t
show_alarm(struct device
*dev
, struct device_attribute
*da
,
197 struct sensor_device_attribute
*attr
= to_sensor_dev_attr(da
);
198 struct ds1621_data
*data
= ds1621_update_client(dev
);
199 return sprintf(buf
, "%d\n", !!(data
->conf
& attr
->index
));
202 static DEVICE_ATTR(alarms
, S_IRUGO
, show_alarms
, NULL
);
203 static SENSOR_DEVICE_ATTR(temp1_input
, S_IRUGO
, show_temp
, NULL
, 0);
204 static SENSOR_DEVICE_ATTR(temp1_min
, S_IWUSR
| S_IRUGO
, show_temp
, set_temp
, 1);
205 static SENSOR_DEVICE_ATTR(temp1_max
, S_IWUSR
| S_IRUGO
, show_temp
, set_temp
, 2);
206 static SENSOR_DEVICE_ATTR(temp1_min_alarm
, S_IRUGO
, show_alarm
, NULL
,
207 DS1621_ALARM_TEMP_LOW
);
208 static SENSOR_DEVICE_ATTR(temp1_max_alarm
, S_IRUGO
, show_alarm
, NULL
,
209 DS1621_ALARM_TEMP_HIGH
);
211 static struct attribute
*ds1621_attributes
[] = {
212 &sensor_dev_attr_temp1_input
.dev_attr
.attr
,
213 &sensor_dev_attr_temp1_min
.dev_attr
.attr
,
214 &sensor_dev_attr_temp1_max
.dev_attr
.attr
,
215 &sensor_dev_attr_temp1_min_alarm
.dev_attr
.attr
,
216 &sensor_dev_attr_temp1_max_alarm
.dev_attr
.attr
,
217 &dev_attr_alarms
.attr
,
221 static const struct attribute_group ds1621_group
= {
222 .attrs
= ds1621_attributes
,
226 /* Return 0 if detection is successful, -ENODEV otherwise */
227 static int ds1621_detect(struct i2c_client
*client
,
228 struct i2c_board_info
*info
)
230 struct i2c_adapter
*adapter
= client
->adapter
;
234 if (!i2c_check_functionality(adapter
, I2C_FUNC_SMBUS_BYTE_DATA
235 | I2C_FUNC_SMBUS_WORD_DATA
236 | I2C_FUNC_SMBUS_WRITE_BYTE
))
239 /* Now, we do the remaining detection. It is lousy. */
240 /* The NVB bit should be low if no EEPROM write has been requested
241 during the latest 10ms, which is highly improbable in our case. */
242 conf
= i2c_smbus_read_byte_data(client
, DS1621_REG_CONF
);
243 if (conf
< 0 || conf
& DS1621_REG_CONFIG_NVB
)
245 /* The 7 lowest bits of a temperature should always be 0. */
246 for (i
= 0; i
< ARRAY_SIZE(DS1621_REG_TEMP
); i
++) {
247 temp
= i2c_smbus_read_word_data(client
, DS1621_REG_TEMP
[i
]);
248 if (temp
< 0 || (temp
& 0x7f00))
252 strlcpy(info
->type
, "ds1621", I2C_NAME_SIZE
);
257 static int ds1621_probe(struct i2c_client
*client
,
258 const struct i2c_device_id
*id
)
260 struct ds1621_data
*data
;
263 data
= kzalloc(sizeof(struct ds1621_data
), GFP_KERNEL
);
269 i2c_set_clientdata(client
, data
);
270 mutex_init(&data
->update_lock
);
272 /* Initialize the DS1621 chip */
273 ds1621_init_client(client
);
275 /* Register sysfs hooks */
276 if ((err
= sysfs_create_group(&client
->dev
.kobj
, &ds1621_group
)))
279 data
->hwmon_dev
= hwmon_device_register(&client
->dev
);
280 if (IS_ERR(data
->hwmon_dev
)) {
281 err
= PTR_ERR(data
->hwmon_dev
);
282 goto exit_remove_files
;
288 sysfs_remove_group(&client
->dev
.kobj
, &ds1621_group
);
295 static int ds1621_remove(struct i2c_client
*client
)
297 struct ds1621_data
*data
= i2c_get_clientdata(client
);
299 hwmon_device_unregister(data
->hwmon_dev
);
300 sysfs_remove_group(&client
->dev
.kobj
, &ds1621_group
);
307 static const struct i2c_device_id ds1621_id
[] = {
308 { "ds1621", ds1621
},
309 { "ds1625", ds1621
},
312 MODULE_DEVICE_TABLE(i2c
, ds1621_id
);
314 /* This is the driver that will be inserted */
315 static struct i2c_driver ds1621_driver
= {
316 .class = I2C_CLASS_HWMON
,
320 .probe
= ds1621_probe
,
321 .remove
= ds1621_remove
,
322 .id_table
= ds1621_id
,
323 .detect
= ds1621_detect
,
324 .address_list
= normal_i2c
,
327 static int __init
ds1621_init(void)
329 return i2c_add_driver(&ds1621_driver
);
332 static void __exit
ds1621_exit(void)
334 i2c_del_driver(&ds1621_driver
);
338 MODULE_AUTHOR("Christian W. Zuckschwerdt <zany@triq.net>");
339 MODULE_DESCRIPTION("DS1621 driver");
340 MODULE_LICENSE("GPL");
342 module_init(ds1621_init
);
343 module_exit(ds1621_exit
);