2 * Copyright (c) 2001, 2003 Maciej W. Rozycki
4 * DEC MS02-NV (54-20948-01) battery backed-up NVRAM module for
5 * DECstation/DECsystem 5000/2x0 and DECsystem 5900 and 5900/260
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * as published by the Free Software Foundation; either version
11 * 2 of the License, or (at your option) any later version.
14 #include <linux/ioport.h>
15 #include <linux/mtd/mtd.h>
18 * Addresses are decoded as follows:
20 * 0x000000 - 0x3fffff SRAM
21 * 0x400000 - 0x7fffff CSR
23 * Within the SRAM area the following ranges are forced by the system
26 * 0x000000 - 0x0003ff diagnostic area, destroyed upon a reboot
27 * 0x000400 - ENDofRAM storage area, available to operating systems
29 * but we can't really use the available area right from 0x000400 as
30 * the first word is used by the firmware as a status flag passed
31 * from an operating system. If anything but the valid data magic
32 * ID value is found, the firmware considers the SRAM clean, i.e.
33 * containing no valid data, and disables the battery resulting in
34 * data being erased as soon as power is switched off. So the choice
35 * for the start address of the user-available is 0x001000 which is
36 * nicely page aligned. The area between 0x000404 and 0x000fff may
37 * be used by the driver for own needs.
39 * The diagnostic area defines two status words to be read by an
40 * operating system, a magic ID to distinguish a MS02-NV board from
41 * anything else and a status information providing results of tests
42 * as well as the size of SRAM available, which can be 1MiB or 2MiB
43 * (that's what the firmware handles; no idea if 2MiB modules ever
46 * The firmware only handles the MS02-NV board if installed in the
47 * last (15th) slot, so for any other location the status information
48 * stored in the SRAM cannot be relied upon. But from the hardware
49 * point of view there is no problem using up to 14 such boards in a
50 * system -- only the 1st slot needs to be filled with a DRAM module.
51 * The MS02-NV board is ECC-protected, like other MS02 memory boards.
53 * The state of the battery as provided by the CSR is reflected on
54 * the two onboard LEDs. When facing the battery side of the board,
55 * with the LEDs at the top left and the battery at the bottom right
56 * (i.e. looking from the back side of the system box), their meaning
57 * is as follows (the system has to be powered on):
59 * left LED battery disable status: lit = enabled
60 * right LED battery condition status: lit = OK
63 /* MS02-NV iomem register offsets. */
64 #define MS02NV_CSR 0x400000 /* control & status register */
66 /* MS02-NV CSR status bits. */
67 #define MS02NV_CSR_BATT_OK 0x01 /* battery OK */
68 #define MS02NV_CSR_BATT_OFF 0x02 /* battery disabled */
71 /* MS02-NV memory offsets. */
72 #define MS02NV_DIAG 0x0003f8 /* diagnostic status */
73 #define MS02NV_MAGIC 0x0003fc /* MS02-NV magic ID */
74 #define MS02NV_VALID 0x000400 /* valid data magic ID */
75 #define MS02NV_RAM 0x001000 /* user-exposed RAM start */
77 /* MS02-NV diagnostic status bits. */
78 #define MS02NV_DIAG_TEST 0x01 /* SRAM test done (?) */
79 #define MS02NV_DIAG_RO 0x02 /* SRAM r/o test done */
80 #define MS02NV_DIAG_RW 0x04 /* SRAM r/w test done */
81 #define MS02NV_DIAG_FAIL 0x08 /* SRAM test failed */
82 #define MS02NV_DIAG_SIZE_MASK 0xf0 /* SRAM size mask */
83 #define MS02NV_DIAG_SIZE_SHIFT 0x10 /* SRAM size shift (left) */
85 /* MS02-NV general constants. */
86 #define MS02NV_ID 0x03021966 /* MS02-NV magic ID value */
87 #define MS02NV_VALID_ID 0xbd100248 /* valid data magic ID value */
88 #define MS02NV_SLOT_SIZE 0x800000 /* size of the address space
89 decoded by the module */
92 typedef volatile u32 ms02nv_uint
;
94 struct ms02nv_private
{
95 struct mtd_info
*next
;
97 struct resource
*module
;
98 struct resource
*diag_ram
;
99 struct resource
*user_ram
;
100 struct resource
*csr
;