[POWERPC] Add Freescale PCI VENDOR ID and 8641 device IDs
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / s390 / char / tape.h
blob3b52f5c1dbefc2d1b388d74c8d46842a72ee28a3
1 /*
2 * drivers/s390/char/tape.h
3 * tape device driver for 3480/3490E/3590 tapes.
5 * S390 and zSeries version
6 * Copyright IBM Corp. 2001,2006
7 * Author(s): Carsten Otte <cotte@de.ibm.com>
8 * Tuan Ngo-Anh <ngoanh@de.ibm.com>
9 * Martin Schwidefsky <schwidefsky@de.ibm.com>
10 * Stefan Bader <shbader@de.ibm.com>
13 #ifndef _TAPE_H
14 #define _TAPE_H
16 #include <asm/ccwdev.h>
17 #include <asm/debug.h>
18 #include <asm/idals.h>
19 #include <linux/blkdev.h>
20 #include <linux/kernel.h>
21 #include <linux/module.h>
22 #include <linux/mtio.h>
23 #include <linux/interrupt.h>
24 #include <linux/workqueue.h>
26 struct gendisk;
29 * Define DBF_LIKE_HELL for lots of messages in the debug feature.
31 #define DBF_LIKE_HELL
32 #ifdef DBF_LIKE_HELL
33 #define DBF_LH(level, str, ...) \
34 do { \
35 debug_sprintf_event(TAPE_DBF_AREA, level, str, ## __VA_ARGS__); \
36 } while (0)
37 #else
38 #define DBF_LH(level, str, ...) do {} while(0)
39 #endif
42 * macros s390 debug feature (dbf)
44 #define DBF_EVENT(d_level, d_str...) \
45 do { \
46 debug_sprintf_event(TAPE_DBF_AREA, d_level, d_str); \
47 } while (0)
49 #define DBF_EXCEPTION(d_level, d_str...) \
50 do { \
51 debug_sprintf_exception(TAPE_DBF_AREA, d_level, d_str); \
52 } while (0)
54 #define TAPE_VERSION_MAJOR 2
55 #define TAPE_VERSION_MINOR 0
56 #define TAPE_MAGIC "tape"
58 #define TAPE_MINORS_PER_DEV 2 /* two minors per device */
59 #define TAPEBLOCK_HSEC_SIZE 2048
60 #define TAPEBLOCK_HSEC_S2B 2
61 #define TAPEBLOCK_RETRIES 5
63 enum tape_medium_state {
64 MS_UNKNOWN,
65 MS_LOADED,
66 MS_UNLOADED,
67 MS_SIZE
70 enum tape_state {
71 TS_UNUSED=0,
72 TS_IN_USE,
73 TS_BLKUSE,
74 TS_INIT,
75 TS_NOT_OPER,
76 TS_SIZE
79 enum tape_op {
80 TO_BLOCK, /* Block read */
81 TO_BSB, /* Backward space block */
82 TO_BSF, /* Backward space filemark */
83 TO_DSE, /* Data security erase */
84 TO_FSB, /* Forward space block */
85 TO_FSF, /* Forward space filemark */
86 TO_LBL, /* Locate block label */
87 TO_NOP, /* No operation */
88 TO_RBA, /* Read backward */
89 TO_RBI, /* Read block information */
90 TO_RFO, /* Read forward */
91 TO_REW, /* Rewind tape */
92 TO_RUN, /* Rewind and unload tape */
93 TO_WRI, /* Write block */
94 TO_WTM, /* Write tape mark */
95 TO_MSEN, /* Medium sense */
96 TO_LOAD, /* Load tape */
97 TO_READ_CONFIG, /* Read configuration data */
98 TO_READ_ATTMSG, /* Read attention message */
99 TO_DIS, /* Tape display */
100 TO_ASSIGN, /* Assign tape to channel path */
101 TO_UNASSIGN, /* Unassign tape from channel path */
102 TO_CRYPT_ON, /* Enable encrpytion */
103 TO_CRYPT_OFF, /* Disable encrpytion */
104 TO_KEKL_SET, /* Set KEK label */
105 TO_KEKL_QUERY, /* Query KEK label */
106 TO_RDC, /* Read device characteristics */
107 TO_SIZE, /* #entries in tape_op_t */
110 /* Forward declaration */
111 struct tape_device;
113 /* tape_request->status can be: */
114 enum tape_request_status {
115 TAPE_REQUEST_INIT, /* request is ready to be processed */
116 TAPE_REQUEST_QUEUED, /* request is queued to be processed */
117 TAPE_REQUEST_IN_IO, /* request is currently in IO */
118 TAPE_REQUEST_DONE, /* request is completed. */
119 TAPE_REQUEST_CANCEL, /* request should be canceled. */
120 TAPE_REQUEST_LONG_BUSY, /* request has to be restarted after long busy */
123 /* Tape CCW request */
124 struct tape_request {
125 struct list_head list; /* list head for request queueing. */
126 struct tape_device *device; /* tape device of this request */
127 struct ccw1 *cpaddr; /* address of the channel program. */
128 void *cpdata; /* pointer to ccw data. */
129 enum tape_request_status status;/* status of this request */
130 int options; /* options for execution. */
131 int retries; /* retry counter for error recovery. */
132 int rescnt; /* residual count from devstat. */
134 /* Callback for delivering final status. */
135 void (*callback)(struct tape_request *, void *);
136 void *callback_data;
138 enum tape_op op;
139 int rc;
142 /* Function type for magnetic tape commands */
143 typedef int (*tape_mtop_fn)(struct tape_device *, int);
145 /* Size of the array containing the mtops for a discipline */
146 #define TAPE_NR_MTOPS (MTMKPART+1)
148 /* Tape Discipline */
149 struct tape_discipline {
150 struct module *owner;
151 int (*setup_device)(struct tape_device *);
152 void (*cleanup_device)(struct tape_device *);
153 int (*irq)(struct tape_device *, struct tape_request *, struct irb *);
154 struct tape_request *(*read_block)(struct tape_device *, size_t);
155 struct tape_request *(*write_block)(struct tape_device *, size_t);
156 void (*process_eov)(struct tape_device*);
157 #ifdef CONFIG_S390_TAPE_BLOCK
158 /* Block device stuff. */
159 struct tape_request *(*bread)(struct tape_device *, struct request *);
160 void (*check_locate)(struct tape_device *, struct tape_request *);
161 void (*free_bread)(struct tape_request *);
162 #endif
163 /* ioctl function for additional ioctls. */
164 int (*ioctl_fn)(struct tape_device *, unsigned int, unsigned long);
165 /* Array of tape commands with TAPE_NR_MTOPS entries */
166 tape_mtop_fn *mtop_array;
170 * The discipline irq function either returns an error code (<0) which
171 * means that the request has failed with an error or one of the following:
173 #define TAPE_IO_SUCCESS 0 /* request successful */
174 #define TAPE_IO_PENDING 1 /* request still running */
175 #define TAPE_IO_RETRY 2 /* retry to current request */
176 #define TAPE_IO_STOP 3 /* stop the running request */
177 #define TAPE_IO_LONG_BUSY 4 /* delay the running request */
179 /* Char Frontend Data */
180 struct tape_char_data {
181 struct idal_buffer *idal_buf; /* idal buffer for user char data */
182 int block_size; /* of size block_size. */
185 #ifdef CONFIG_S390_TAPE_BLOCK
186 /* Block Frontend Data */
187 struct tape_blk_data
189 struct tape_device * device;
190 /* Block device request queue. */
191 request_queue_t * request_queue;
192 spinlock_t request_queue_lock;
194 /* Task to move entries from block request to CCS request queue. */
195 struct work_struct requeue_task;
196 atomic_t requeue_scheduled;
198 /* Current position on the tape. */
199 long block_position;
200 int medium_changed;
201 struct gendisk * disk;
203 #endif
205 /* Tape Info */
206 struct tape_device {
207 /* entry in tape_device_list */
208 struct list_head node;
210 int cdev_id;
211 struct ccw_device * cdev;
212 struct tape_class_device * nt;
213 struct tape_class_device * rt;
215 /* Device discipline information. */
216 struct tape_discipline * discipline;
217 void * discdata;
219 /* Generic status flags */
220 long tape_generic_status;
222 /* Device state information. */
223 wait_queue_head_t state_change_wq;
224 enum tape_state tape_state;
225 enum tape_medium_state medium_state;
226 unsigned char * modeset_byte;
228 /* Reference count. */
229 atomic_t ref_count;
231 /* Request queue. */
232 struct list_head req_queue;
234 /* Each tape device has (currently) two minor numbers. */
235 int first_minor;
237 /* Number of tapemarks required for correct termination. */
238 int required_tapemarks;
240 /* Block ID of the BOF */
241 unsigned int bof;
243 /* Character device frontend data */
244 struct tape_char_data char_data;
245 #ifdef CONFIG_S390_TAPE_BLOCK
246 /* Block dev frontend data */
247 struct tape_blk_data blk_data;
248 #endif
250 /* Function to start or stop the next request later. */
251 struct delayed_work tape_dnr;
253 /* Timer for long busy */
254 struct timer_list lb_timeout;
258 /* Externals from tape_core.c */
259 extern struct tape_request *tape_alloc_request(int cplength, int datasize);
260 extern void tape_free_request(struct tape_request *);
261 extern int tape_do_io(struct tape_device *, struct tape_request *);
262 extern int tape_do_io_async(struct tape_device *, struct tape_request *);
263 extern int tape_do_io_interruptible(struct tape_device *, struct tape_request *);
264 extern int tape_cancel_io(struct tape_device *, struct tape_request *);
265 void tape_hotplug_event(struct tape_device *, int major, int action);
267 static inline int
268 tape_do_io_free(struct tape_device *device, struct tape_request *request)
270 int rc;
272 rc = tape_do_io(device, request);
273 tape_free_request(request);
274 return rc;
277 extern int tape_oper_handler(int irq, int status);
278 extern void tape_noper_handler(int irq, int status);
279 extern int tape_open(struct tape_device *);
280 extern int tape_release(struct tape_device *);
281 extern int tape_mtop(struct tape_device *, int, int);
282 extern void tape_state_set(struct tape_device *, enum tape_state);
284 extern int tape_generic_online(struct tape_device *, struct tape_discipline *);
285 extern int tape_generic_offline(struct tape_device *device);
287 /* Externals from tape_devmap.c */
288 extern int tape_generic_probe(struct ccw_device *);
289 extern void tape_generic_remove(struct ccw_device *);
291 extern struct tape_device *tape_get_device(int devindex);
292 extern struct tape_device *tape_get_device_reference(struct tape_device *);
293 extern struct tape_device *tape_put_device(struct tape_device *);
295 /* Externals from tape_char.c */
296 extern int tapechar_init(void);
297 extern void tapechar_exit(void);
298 extern int tapechar_setup_device(struct tape_device *);
299 extern void tapechar_cleanup_device(struct tape_device *);
301 /* Externals from tape_block.c */
302 #ifdef CONFIG_S390_TAPE_BLOCK
303 extern int tapeblock_init (void);
304 extern void tapeblock_exit(void);
305 extern int tapeblock_setup_device(struct tape_device *);
306 extern void tapeblock_cleanup_device(struct tape_device *);
307 #else
308 static inline int tapeblock_init (void) {return 0;}
309 static inline void tapeblock_exit (void) {;}
310 static inline int tapeblock_setup_device(struct tape_device *t) {return 0;}
311 static inline void tapeblock_cleanup_device (struct tape_device *t) {;}
312 #endif
314 /* tape initialisation functions */
315 #ifdef CONFIG_PROC_FS
316 extern void tape_proc_init (void);
317 extern void tape_proc_cleanup (void);
318 #else
319 static inline void tape_proc_init (void) {;}
320 static inline void tape_proc_cleanup (void) {;}
321 #endif
323 /* a function for dumping device sense info */
324 extern void tape_dump_sense(struct tape_device *, struct tape_request *,
325 struct irb *);
326 extern void tape_dump_sense_dbf(struct tape_device *, struct tape_request *,
327 struct irb *);
329 /* functions for handling the status of a device */
330 extern void tape_med_state_set(struct tape_device *, enum tape_medium_state);
332 /* The debug area */
333 extern debug_info_t *TAPE_DBF_AREA;
335 /* functions for building ccws */
336 static inline struct ccw1 *
337 tape_ccw_cc(struct ccw1 *ccw, __u8 cmd_code, __u16 memsize, void *cda)
339 ccw->cmd_code = cmd_code;
340 ccw->flags = CCW_FLAG_CC;
341 ccw->count = memsize;
342 ccw->cda = (__u32)(addr_t) cda;
343 return ccw + 1;
346 static inline struct ccw1 *
347 tape_ccw_end(struct ccw1 *ccw, __u8 cmd_code, __u16 memsize, void *cda)
349 ccw->cmd_code = cmd_code;
350 ccw->flags = 0;
351 ccw->count = memsize;
352 ccw->cda = (__u32)(addr_t) cda;
353 return ccw + 1;
356 static inline struct ccw1 *
357 tape_ccw_cmd(struct ccw1 *ccw, __u8 cmd_code)
359 ccw->cmd_code = cmd_code;
360 ccw->flags = 0;
361 ccw->count = 0;
362 ccw->cda = (__u32)(addr_t) &ccw->cmd_code;
363 return ccw + 1;
366 static inline struct ccw1 *
367 tape_ccw_repeat(struct ccw1 *ccw, __u8 cmd_code, int count)
369 while (count-- > 0) {
370 ccw->cmd_code = cmd_code;
371 ccw->flags = CCW_FLAG_CC;
372 ccw->count = 0;
373 ccw->cda = (__u32)(addr_t) &ccw->cmd_code;
374 ccw++;
376 return ccw;
379 static inline struct ccw1 *
380 tape_ccw_cc_idal(struct ccw1 *ccw, __u8 cmd_code, struct idal_buffer *idal)
382 ccw->cmd_code = cmd_code;
383 ccw->flags = CCW_FLAG_CC;
384 idal_buffer_set_cda(idal, ccw);
385 return ccw++;
388 static inline struct ccw1 *
389 tape_ccw_end_idal(struct ccw1 *ccw, __u8 cmd_code, struct idal_buffer *idal)
391 ccw->cmd_code = cmd_code;
392 ccw->flags = 0;
393 idal_buffer_set_cda(idal, ccw);
394 return ccw++;
397 /* Global vars */
398 extern const char *tape_state_verbose[];
399 extern const char *tape_op_verbose[];
401 #endif /* for ifdef tape.h */