drivers/net/tulip/eeprom.c: fix bogus "(null)" in tulip init messages
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / firmware / dcdbas.h
blobca3cb0a54ab67a3f50bd22b3d579942a5a1057ae
1 /*
2 * dcdbas.h: Definitions for Dell Systems Management Base driver
4 * Copyright (C) 1995-2005 Dell Inc.
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License v2.0 as published by
8 * the Free Software Foundation.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
16 #ifndef _DCDBAS_H_
17 #define _DCDBAS_H_
19 #include <linux/device.h>
20 #include <linux/sysfs.h>
21 #include <linux/types.h>
23 #define MAX_SMI_DATA_BUF_SIZE (256 * 1024)
25 #define HC_ACTION_NONE (0)
26 #define HC_ACTION_HOST_CONTROL_POWEROFF BIT(1)
27 #define HC_ACTION_HOST_CONTROL_POWERCYCLE BIT(2)
29 #define HC_SMITYPE_NONE (0)
30 #define HC_SMITYPE_TYPE1 (1)
31 #define HC_SMITYPE_TYPE2 (2)
32 #define HC_SMITYPE_TYPE3 (3)
34 #define ESM_APM_CMD (0x0A0)
35 #define ESM_APM_POWER_CYCLE (0x10)
36 #define ESM_STATUS_CMD_UNSUCCESSFUL (-1)
38 #define CMOS_BASE_PORT (0x070)
39 #define CMOS_PAGE1_INDEX_PORT (0)
40 #define CMOS_PAGE1_DATA_PORT (1)
41 #define CMOS_PAGE2_INDEX_PORT_PIIX4 (2)
42 #define CMOS_PAGE2_DATA_PORT_PIIX4 (3)
43 #define PE1400_APM_CONTROL_PORT (0x0B0)
44 #define PCAT_APM_CONTROL_PORT (0x0B2)
45 #define PCAT_APM_STATUS_PORT (0x0B3)
46 #define PE1300_CMOS_CMD_STRUCT_PTR (0x38)
47 #define PE1400_CMOS_CMD_STRUCT_PTR (0x70)
49 #define MAX_SYSMGMT_SHORTCMD_PARMBUF_LEN (14)
50 #define MAX_SYSMGMT_LONGCMD_SGENTRY_NUM (16)
52 #define TIMEOUT_USEC_SHORT_SEMA_BLOCKING (10000)
53 #define EXPIRED_TIMER (0)
55 #define SMI_CMD_MAGIC (0x534D4931)
57 #define DCDBAS_DEV_ATTR_RW(_name) \
58 DEVICE_ATTR(_name,0600,_name##_show,_name##_store);
60 #define DCDBAS_DEV_ATTR_RO(_name) \
61 DEVICE_ATTR(_name,0400,_name##_show,NULL);
63 #define DCDBAS_DEV_ATTR_WO(_name) \
64 DEVICE_ATTR(_name,0200,NULL,_name##_store);
66 #define DCDBAS_BIN_ATTR_RW(_name) \
67 struct bin_attribute bin_attr_##_name = { \
68 .attr = { .name = __stringify(_name), \
69 .mode = 0600 }, \
70 .read = _name##_read, \
71 .write = _name##_write, \
74 struct smi_cmd {
75 __u32 magic;
76 __u32 ebx;
77 __u32 ecx;
78 __u16 command_address;
79 __u8 command_code;
80 __u8 reserved;
81 __u8 command_buffer[1];
82 } __attribute__ ((packed));
84 struct apm_cmd {
85 __u8 command;
86 __s8 status;
87 __u16 reserved;
88 union {
89 struct {
90 __u8 parm[MAX_SYSMGMT_SHORTCMD_PARMBUF_LEN];
91 } __attribute__ ((packed)) shortreq;
93 struct {
94 __u16 num_sg_entries;
95 struct {
96 __u32 size;
97 __u64 addr;
98 } __attribute__ ((packed))
99 sglist[MAX_SYSMGMT_LONGCMD_SGENTRY_NUM];
100 } __attribute__ ((packed)) longreq;
101 } __attribute__ ((packed)) parameters;
102 } __attribute__ ((packed));
104 int dcdbas_smi_request(struct smi_cmd *smi_cmd);
106 #endif /* _DCDBAS_H_ */