?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge branch 'for-next'
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / arch / arm / mach-versatile / core.c
blob136c32e7ed8eb44d5a1c59d20a86349e30c813c2
1 /*
2 * linux/arch/arm/mach-versatile/core.c
3 *
4 * Copyright (C) 1999 - 2003 ARM Limited
5 * Copyright (C) 2000 Deep Blue Solutions Ltd
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 */
21 #include <linux/init.h>
22 #include <linux/device.h>
23 #include <linux/dma-mapping.h>
24 #include <linux/platform_device.h>
25 #include <linux/sysdev.h>
26 #include <linux/interrupt.h>
27 #include <linux/amba/bus.h>
28 #include <linux/amba/clcd.h>
29 #include <linux/amba/pl061.h>
30 #include <linux/amba/mmci.h>
31 #include <linux/amba/pl022.h>
32 #include <linux/io.h>
33 #include <linux/gfp.h>
34 #include <linux/clkdev.h>
35
36 #include <asm/system.h>
37 #include <asm/irq.h>
38 #include <asm/leds.h>
39 #include <asm/hardware/arm_timer.h>
40 #include <asm/hardware/icst.h>
41 #include <asm/hardware/vic.h>
42 #include <asm/mach-types.h>
43
44 #include <asm/mach/arch.h>
45 #include <asm/mach/flash.h>
46 #include <asm/mach/irq.h>
47 #include <asm/mach/time.h>
48 #include <asm/mach/map.h>
49 #include <mach/hardware.h>
50 #include <mach/platform.h>
51 #include <asm/hardware/timer-sp.h>
52
53 #include <plat/sched_clock.h>
54
55 #include "core.h"
56
57 /*
58 * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
59 * is the (PA >> 12).
60 *
61 * Setup a VA for the Versatile Vectored Interrupt Controller.
62 */
63 #define VA_VIC_BASE __io_address(VERSATILE_VIC_BASE)
64 #define VA_SIC_BASE __io_address(VERSATILE_SIC_BASE)
65
66 static void sic_mask_irq(struct irq_data *d)
67 {
68 unsigned int irq = d->irq - IRQ_SIC_START;
69
70 writel(1 << irq, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR);
71 }
72
73 static void sic_unmask_irq(struct irq_data *d)
74 {
75 unsigned int irq = d->irq - IRQ_SIC_START;
76
77 writel(1 << irq, VA_SIC_BASE + SIC_IRQ_ENABLE_SET);
78 }
79
80 static struct irq_chip sic_chip = {
81 .name = "SIC",
82 .irq_ack = sic_mask_irq,
83 .irq_mask = sic_mask_irq,
84 .irq_unmask = sic_unmask_irq,
85 };
86
87 static void
88 sic_handle_irq(unsigned int irq, struct irq_desc *desc)
89 {
90 unsigned long status = readl(VA_SIC_BASE + SIC_IRQ_STATUS);
91
92 if (status == 0) {
93 do_bad_IRQ(irq, desc);
94 return;
95 }
96
97 do {
98 irq = ffs(status) - 1;
99 status &= ~(1 << irq);
100
101 irq += IRQ_SIC_START;
102
103 generic_handle_irq(irq);
104 } while (status);
105 }
106
107 #if 1
108 #define IRQ_MMCI0A IRQ_VICSOURCE22
109 #define IRQ_AACI IRQ_VICSOURCE24
110 #define IRQ_ETH IRQ_VICSOURCE25
111 #define PIC_MASK 0xFFD00000
112 #else
113 #define IRQ_MMCI0A IRQ_SIC_MMCI0A
114 #define IRQ_AACI IRQ_SIC_AACI
115 #define IRQ_ETH IRQ_SIC_ETH
116 #define PIC_MASK 0
117 #endif
118
119 void __init versatile_init_irq(void)
120 {
121 unsigned int i;
122
123 vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0, 0);
124
125 set_irq_chained_handler(IRQ_VICSOURCE31, sic_handle_irq);
126
127 /* Do second interrupt controller */
128 writel(~0, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR);
129
130 for (i = IRQ_SIC_START; i <= IRQ_SIC_END; i++) {
131 if ((PIC_MASK & (1 << (i - IRQ_SIC_START))) == 0) {
132 set_irq_chip(i, &sic_chip);
133 set_irq_handler(i, handle_level_irq);
134 set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
135 }
136 }
137
138 /*
139 * Interrupts on secondary controller from 0 to 8 are routed to
140 * source 31 on PIC.
141 * Interrupts from 21 to 31 are routed directly to the VIC on
142 * the corresponding number on primary controller. This is controlled
143 * by setting PIC_ENABLEx.
144 */
145 writel(PIC_MASK, VA_SIC_BASE + SIC_INT_PIC_ENABLE);
146 }
147
148 static struct map_desc versatile_io_desc[] __initdata = {
149 {
150 .virtual = IO_ADDRESS(VERSATILE_SYS_BASE),
151 .pfn = __phys_to_pfn(VERSATILE_SYS_BASE),
152 .length = SZ_4K,
153 .type = MT_DEVICE
154 }, {
155 .virtual = IO_ADDRESS(VERSATILE_SIC_BASE),
156 .pfn = __phys_to_pfn(VERSATILE_SIC_BASE),
157 .length = SZ_4K,
158 .type = MT_DEVICE
159 }, {
160 .virtual = IO_ADDRESS(VERSATILE_VIC_BASE),
161 .pfn = __phys_to_pfn(VERSATILE_VIC_BASE),
162 .length = SZ_4K,
163 .type = MT_DEVICE
164 }, {
165 .virtual = IO_ADDRESS(VERSATILE_SCTL_BASE),
166 .pfn = __phys_to_pfn(VERSATILE_SCTL_BASE),
167 .length = SZ_4K * 9,
168 .type = MT_DEVICE
169 },
170 #ifdef CONFIG_MACH_VERSATILE_AB
171 {
172 .virtual = IO_ADDRESS(VERSATILE_GPIO0_BASE),
173 .pfn = __phys_to_pfn(VERSATILE_GPIO0_BASE),
174 .length = SZ_4K,
175 .type = MT_DEVICE
176 }, {
177 .virtual = IO_ADDRESS(VERSATILE_IB2_BASE),
178 .pfn = __phys_to_pfn(VERSATILE_IB2_BASE),
179 .length = SZ_64M,
180 .type = MT_DEVICE
181 },
182 #endif
183 #ifdef CONFIG_DEBUG_LL
184 {
185 .virtual = IO_ADDRESS(VERSATILE_UART0_BASE),
186 .pfn = __phys_to_pfn(VERSATILE_UART0_BASE),
187 .length = SZ_4K,
188 .type = MT_DEVICE
189 },
190 #endif
191 #ifdef CONFIG_PCI
192 {
193 .virtual = IO_ADDRESS(VERSATILE_PCI_CORE_BASE),
194 .pfn = __phys_to_pfn(VERSATILE_PCI_CORE_BASE),
195 .length = SZ_4K,
196 .type = MT_DEVICE
197 }, {
198 .virtual = (unsigned long)VERSATILE_PCI_VIRT_BASE,
199 .pfn = __phys_to_pfn(VERSATILE_PCI_BASE),
200 .length = VERSATILE_PCI_BASE_SIZE,
201 .type = MT_DEVICE
202 }, {
203 .virtual = (unsigned long)VERSATILE_PCI_CFG_VIRT_BASE,
204 .pfn = __phys_to_pfn(VERSATILE_PCI_CFG_BASE),
205 .length = VERSATILE_PCI_CFG_BASE_SIZE,
206 .type = MT_DEVICE
207 },
208 #if 0
209 {
210 .virtual = VERSATILE_PCI_VIRT_MEM_BASE0,
211 .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0),
212 .length = SZ_16M,
213 .type = MT_DEVICE
214 }, {
215 .virtual = VERSATILE_PCI_VIRT_MEM_BASE1,
216 .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE1),
217 .length = SZ_16M,
218 .type = MT_DEVICE
219 }, {
220 .virtual = VERSATILE_PCI_VIRT_MEM_BASE2,
221 .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE2),
222 .length = SZ_16M,
223 .type = MT_DEVICE
224 },
225 #endif
226 #endif
227 };
228
229 void __init versatile_map_io(void)
230 {
231 iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc));
232 }
233
234
235 #define VERSATILE_FLASHCTRL (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_FLASH_OFFSET)
236
237 static int versatile_flash_init(void)
238 {
239 u32 val;
240
241 val = __raw_readl(VERSATILE_FLASHCTRL);
242 val &= ~VERSATILE_FLASHPROG_FLVPPEN;
243 __raw_writel(val, VERSATILE_FLASHCTRL);
244
245 return 0;
246 }
247
248 static void versatile_flash_exit(void)
249 {
250 u32 val;
251
252 val = __raw_readl(VERSATILE_FLASHCTRL);
253 val &= ~VERSATILE_FLASHPROG_FLVPPEN;
254 __raw_writel(val, VERSATILE_FLASHCTRL);
255 }
256
257 static void versatile_flash_set_vpp(int on)
258 {
259 u32 val;
260
261 val = __raw_readl(VERSATILE_FLASHCTRL);
262 if (on)
263 val |= VERSATILE_FLASHPROG_FLVPPEN;
264 else
265 val &= ~VERSATILE_FLASHPROG_FLVPPEN;
266 __raw_writel(val, VERSATILE_FLASHCTRL);
267 }
268
269 static struct flash_platform_data versatile_flash_data = {
270 .map_name = "cfi_probe",
271 .width = 4,
272 .init = versatile_flash_init,
273 .exit = versatile_flash_exit,
274 .set_vpp = versatile_flash_set_vpp,
275 };
276
277 static struct resource versatile_flash_resource = {
278 .start = VERSATILE_FLASH_BASE,
279 .end = VERSATILE_FLASH_BASE + VERSATILE_FLASH_SIZE - 1,
280 .flags = IORESOURCE_MEM,
281 };
282
283 static struct platform_device versatile_flash_device = {
284 .name = "armflash",
285 .id = 0,
286 .dev = {
287 .platform_data = &versatile_flash_data,
288 },
289 .num_resources = 1,
290 .resource = &versatile_flash_resource,
291 };
292
293 static struct resource smc91x_resources[] = {
294 [0] = {
295 .start = VERSATILE_ETH_BASE,
296 .end = VERSATILE_ETH_BASE + SZ_64K - 1,
297 .flags = IORESOURCE_MEM,
298 },
299 [1] = {
300 .start = IRQ_ETH,
301 .end = IRQ_ETH,
302 .flags = IORESOURCE_IRQ,
303 },
304 };
305
306 static struct platform_device smc91x_device = {
307 .name = "smc91x",
308 .id = 0,
309 .num_resources = ARRAY_SIZE(smc91x_resources),
310 .resource = smc91x_resources,
311 };
312
313 static struct resource versatile_i2c_resource = {
314 .start = VERSATILE_I2C_BASE,
315 .end = VERSATILE_I2C_BASE + SZ_4K - 1,
316 .flags = IORESOURCE_MEM,
317 };
318
319 static struct platform_device versatile_i2c_device = {
320 .name = "versatile-i2c",
321 .id = 0,
322 .num_resources = 1,
323 .resource = &versatile_i2c_resource,
324 };
325
326 static struct i2c_board_info versatile_i2c_board_info[] = {
327 {
328 I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
329 },
330 };
331
332 static int __init versatile_i2c_init(void)
333 {
334 return i2c_register_board_info(0, versatile_i2c_board_info,
335 ARRAY_SIZE(versatile_i2c_board_info));
336 }
337 arch_initcall(versatile_i2c_init);
338
339 #define VERSATILE_SYSMCI (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET)
340
341 unsigned int mmc_status(struct device *dev)
342 {
343 struct amba_device *adev = container_of(dev, struct amba_device, dev);
344 u32 mask;
345
346 if (adev->res.start == VERSATILE_MMCI0_BASE)
347 mask = 1;
348 else
349 mask = 2;
350
351 return readl(VERSATILE_SYSMCI) & mask;
352 }
353
354 static struct mmci_platform_data mmc0_plat_data = {
355 .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
356 .status = mmc_status,
357 .gpio_wp = -1,
358 .gpio_cd = -1,
359 };
360
361 static struct resource char_lcd_resources[] = {
362 {
363 .start = VERSATILE_CHAR_LCD_BASE,
364 .end = (VERSATILE_CHAR_LCD_BASE + SZ_4K - 1),
365 .flags = IORESOURCE_MEM,
366 },
367 };
368
369 static struct platform_device char_lcd_device = {
370 .name = "arm-charlcd",
371 .id = -1,
372 .num_resources = ARRAY_SIZE(char_lcd_resources),
373 .resource = char_lcd_resources,
374 };
375
376 /*
377 * Clock handling
378 */
379 static const struct icst_params versatile_oscvco_params = {
380 .ref = 24000000,
381 .vco_max = ICST307_VCO_MAX,
382 .vco_min = ICST307_VCO_MIN,
383 .vd_min = 4 + 8,
384 .vd_max = 511 + 8,
385 .rd_min = 1 + 2,
386 .rd_max = 127 + 2,
387 .s2div = icst307_s2div,
388 .idx2s = icst307_idx2s,
389 };
390
391 static void versatile_oscvco_set(struct clk *clk, struct icst_vco vco)
392 {
393 void __iomem *sys_lock = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LOCK_OFFSET;
394 u32 val;
395
396 val = readl(clk->vcoreg) & ~0x7ffff;
397 val |= vco.v | (vco.r << 9) | (vco.s << 16);
398
399 writel(0xa05f, sys_lock);
400 writel(val, clk->vcoreg);
401 writel(0, sys_lock);
402 }
403
404 static const struct clk_ops osc4_clk_ops = {
405 .round = icst_clk_round,
406 .set = icst_clk_set,
407 .setvco = versatile_oscvco_set,
408 };
409
410 static struct clk osc4_clk = {
411 .ops = &osc4_clk_ops,
412 .params = &versatile_oscvco_params,
413 };
414
415 /*
416 * These are fixed clocks.
417 */
418 static struct clk ref24_clk = {
419 .rate = 24000000,
420 };
421
422 static struct clk dummy_apb_pclk;
423
424 static struct clk_lookup lookups[] = {
425 { /* AMBA bus clock */
426 .con_id = "apb_pclk",
427 .clk = &dummy_apb_pclk,
428 }, { /* UART0 */
429 .dev_id = "dev:f1",
430 .clk = &ref24_clk,
431 }, { /* UART1 */
432 .dev_id = "dev:f2",
433 .clk = &ref24_clk,
434 }, { /* UART2 */
435 .dev_id = "dev:f3",
436 .clk = &ref24_clk,
437 }, { /* UART3 */
438 .dev_id = "fpga:09",
439 .clk = &ref24_clk,
440 }, { /* KMI0 */
441 .dev_id = "fpga:06",
442 .clk = &ref24_clk,
443 }, { /* KMI1 */
444 .dev_id = "fpga:07",
445 .clk = &ref24_clk,
446 }, { /* MMC0 */
447 .dev_id = "fpga:05",
448 .clk = &ref24_clk,
449 }, { /* MMC1 */
450 .dev_id = "fpga:0b",
451 .clk = &ref24_clk,
452 }, { /* SSP */
453 .dev_id = "dev:f4",
454 .clk = &ref24_clk,
455 }, { /* CLCD */
456 .dev_id = "dev:20",
457 .clk = &osc4_clk,
458 }
459 };
460
461 /*
462 * CLCD support.
463 */
464 #define SYS_CLCD_MODE_MASK (3 << 0)
465 #define SYS_CLCD_MODE_888 (0 << 0)
466 #define SYS_CLCD_MODE_5551 (1 << 0)
467 #define SYS_CLCD_MODE_565_RLSB (2 << 0)
468 #define SYS_CLCD_MODE_565_BLSB (3 << 0)
469 #define SYS_CLCD_NLCDIOON (1 << 2)
470 #define SYS_CLCD_VDDPOSSWITCH (1 << 3)
471 #define SYS_CLCD_PWR3V5SWITCH (1 << 4)
472 #define SYS_CLCD_ID_MASK (0x1f << 8)
473 #define SYS_CLCD_ID_SANYO_3_8 (0x00 << 8)
474 #define SYS_CLCD_ID_UNKNOWN_8_4 (0x01 << 8)
475 #define SYS_CLCD_ID_EPSON_2_2 (0x02 << 8)
476 #define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8)
477 #define SYS_CLCD_ID_VGA (0x1f << 8)
478
479 static struct clcd_panel vga = {
480 .mode = {
481 .name = "VGA",
482 .refresh = 60,
483 .xres = 640,
484 .yres = 480,
485 .pixclock = 39721,
486 .left_margin = 40,
487 .right_margin = 24,
488 .upper_margin = 32,
489 .lower_margin = 11,
490 .hsync_len = 96,
491 .vsync_len = 2,
492 .sync = 0,
493 .vmode = FB_VMODE_NONINTERLACED,
494 },
495 .width = -1,
496 .height = -1,
497 .tim2 = TIM2_BCD | TIM2_IPC,
498 .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
499 .bpp = 16,
500 };
501
502 static struct clcd_panel sanyo_3_8_in = {
503 .mode = {
504 .name = "Sanyo QVGA",
505 .refresh = 116,
506 .xres = 320,
507 .yres = 240,
508 .pixclock = 100000,
509 .left_margin = 6,
510 .right_margin = 6,
511 .upper_margin = 5,
512 .lower_margin = 5,
513 .hsync_len = 6,
514 .vsync_len = 6,
515 .sync = 0,
516 .vmode = FB_VMODE_NONINTERLACED,
517 },
518 .width = -1,
519 .height = -1,
520 .tim2 = TIM2_BCD,
521 .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
522 .bpp = 16,
523 };
524
525 static struct clcd_panel sanyo_2_5_in = {
526 .mode = {
527 .name = "Sanyo QVGA Portrait",
528 .refresh = 116,
529 .xres = 240,
530 .yres = 320,
531 .pixclock = 100000,
532 .left_margin = 20,
533 .right_margin = 10,
534 .upper_margin = 2,
535 .lower_margin = 2,
536 .hsync_len = 10,
537 .vsync_len = 2,
538 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
539 .vmode = FB_VMODE_NONINTERLACED,
540 },
541 .width = -1,
542 .height = -1,
543 .tim2 = TIM2_IVS | TIM2_IHS | TIM2_IPC,
544 .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
545 .bpp = 16,
546 };
547
548 static struct clcd_panel epson_2_2_in = {
549 .mode = {
550 .name = "Epson QCIF",
551 .refresh = 390,
552 .xres = 176,
553 .yres = 220,
554 .pixclock = 62500,
555 .left_margin = 3,
556 .right_margin = 2,
557 .upper_margin = 1,
558 .lower_margin = 0,
559 .hsync_len = 3,
560 .vsync_len = 2,
561 .sync = 0,
562 .vmode = FB_VMODE_NONINTERLACED,
563 },
564 .width = -1,
565 .height = -1,
566 .tim2 = TIM2_BCD | TIM2_IPC,
567 .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
568 .bpp = 16,
569 };
570
571 /*
572 * Detect which LCD panel is connected, and return the appropriate
573 * clcd_panel structure. Note: we do not have any information on
574 * the required timings for the 8.4in panel, so we presently assume
575 * VGA timings.
576 */
577 static struct clcd_panel *versatile_clcd_panel(void)
578 {
579 void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
580 struct clcd_panel *panel = &vga;
581 u32 val;
582
583 val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
584 if (val == SYS_CLCD_ID_SANYO_3_8)
585 panel = &sanyo_3_8_in;
586 else if (val == SYS_CLCD_ID_SANYO_2_5)
587 panel = &sanyo_2_5_in;
588 else if (val == SYS_CLCD_ID_EPSON_2_2)
589 panel = &epson_2_2_in;
590 else if (val == SYS_CLCD_ID_VGA)
591 panel = &vga;
592 else {
593 printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
594 val);
595 panel = &vga;
596 }
597
598 return panel;
599 }
600
601 /*
602 * Disable all display connectors on the interface module.
603 */
604 static void versatile_clcd_disable(struct clcd_fb *fb)
605 {
606 void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
607 u32 val;
608
609 val = readl(sys_clcd);
610 val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
611 writel(val, sys_clcd);
612
613 #ifdef CONFIG_MACH_VERSATILE_AB
614 /*
615 * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off
616 */
617 if (machine_is_versatile_ab() && fb->panel == &sanyo_2_5_in) {
618 void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
619 unsigned long ctrl;
620
621 ctrl = readl(versatile_ib2_ctrl);
622 ctrl &= ~0x01;
623 writel(ctrl, versatile_ib2_ctrl);
624 }
625 #endif
626 }
627
628 /*
629 * Enable the relevant connector on the interface module.
630 */
631 static void versatile_clcd_enable(struct clcd_fb *fb)
632 {
633 void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
634 u32 val;
635
636 val = readl(sys_clcd);
637 val &= ~SYS_CLCD_MODE_MASK;
638
639 switch (fb->fb.var.green.length) {
640 case 5:
641 val |= SYS_CLCD_MODE_5551;
642 break;
643 case 6:
644 val |= SYS_CLCD_MODE_565_RLSB;
645 break;
646 case 8:
647 val |= SYS_CLCD_MODE_888;
648 break;
649 }
650
651 /*
652 * Set the MUX
653 */
654 writel(val, sys_clcd);
655
656 /*
657 * And now enable the PSUs
658 */
659 val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
660 writel(val, sys_clcd);
661
662 #ifdef CONFIG_MACH_VERSATILE_AB
663 /*
664 * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on
665 */
666 if (machine_is_versatile_ab() && fb->panel == &sanyo_2_5_in) {
667 void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
668 unsigned long ctrl;
669
670 ctrl = readl(versatile_ib2_ctrl);
671 ctrl |= 0x01;
672 writel(ctrl, versatile_ib2_ctrl);
673 }
674 #endif
675 }
676
677 static unsigned long framesize = SZ_1M;
678
679 static int versatile_clcd_setup(struct clcd_fb *fb)
680 {
681 dma_addr_t dma;
682
683 fb->panel = versatile_clcd_panel();
684
685 fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
686 &dma, GFP_KERNEL);
687 if (!fb->fb.screen_base) {
688 printk(KERN_ERR "CLCD: unable to map framebuffer\n");
689 return -ENOMEM;
690 }
691
692 fb->fb.fix.smem_start = dma;
693 fb->fb.fix.smem_len = framesize;
694
695 return 0;
696 }
697
698 static int versatile_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
699 {
700 return dma_mmap_writecombine(&fb->dev->dev, vma,
701 fb->fb.screen_base,
702 fb->fb.fix.smem_start,
703 fb->fb.fix.smem_len);
704 }
705
706 static void versatile_clcd_remove(struct clcd_fb *fb)
707 {
708 dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
709 fb->fb.screen_base, fb->fb.fix.smem_start);
710 }
711
712 static struct clcd_board clcd_plat_data = {
713 .name = "Versatile",
714 .check = clcdfb_check,
715 .decode = clcdfb_decode,
716 .disable = versatile_clcd_disable,
717 .enable = versatile_clcd_enable,
718 .setup = versatile_clcd_setup,
719 .mmap = versatile_clcd_mmap,
720 .remove = versatile_clcd_remove,
721 };
722
723 static struct pl061_platform_data gpio0_plat_data = {
724 .gpio_base = 0,
725 .irq_base = IRQ_GPIO0_START,
726 };
727
728 static struct pl061_platform_data gpio1_plat_data = {
729 .gpio_base = 8,
730 .irq_base = IRQ_GPIO1_START,
731 };
732
733 static struct pl022_ssp_controller ssp0_plat_data = {
734 .bus_id = 0,
735 .enable_dma = 0,
736 .num_chipselect = 1,
737 };
738
739 #define AACI_IRQ { IRQ_AACI, NO_IRQ }
740 #define AACI_DMA { 0x80, 0x81 }
741 #define MMCI0_IRQ { IRQ_MMCI0A,IRQ_SIC_MMCI0B }
742 #define MMCI0_DMA { 0x84, 0 }
743 #define KMI0_IRQ { IRQ_SIC_KMI0, NO_IRQ }
744 #define KMI0_DMA { 0, 0 }
745 #define KMI1_IRQ { IRQ_SIC_KMI1, NO_IRQ }
746 #define KMI1_DMA { 0, 0 }
747
748 /*
749 * These devices are connected directly to the multi-layer AHB switch
750 */
751 #define SMC_IRQ { NO_IRQ, NO_IRQ }
752 #define SMC_DMA { 0, 0 }
753 #define MPMC_IRQ { NO_IRQ, NO_IRQ }
754 #define MPMC_DMA { 0, 0 }
755 #define CLCD_IRQ { IRQ_CLCDINT, NO_IRQ }
756 #define CLCD_DMA { 0, 0 }
757 #define DMAC_IRQ { IRQ_DMAINT, NO_IRQ }
758 #define DMAC_DMA { 0, 0 }
759
760 /*
761 * These devices are connected via the core APB bridge
762 */
763 #define SCTL_IRQ { NO_IRQ, NO_IRQ }
764 #define SCTL_DMA { 0, 0 }
765 #define WATCHDOG_IRQ { IRQ_WDOGINT, NO_IRQ }
766 #define WATCHDOG_DMA { 0, 0 }
767 #define GPIO0_IRQ { IRQ_GPIOINT0, NO_IRQ }
768 #define GPIO0_DMA { 0, 0 }
769 #define GPIO1_IRQ { IRQ_GPIOINT1, NO_IRQ }
770 #define GPIO1_DMA { 0, 0 }
771 #define RTC_IRQ { IRQ_RTCINT, NO_IRQ }
772 #define RTC_DMA { 0, 0 }
773
774 /*
775 * These devices are connected via the DMA APB bridge
776 */
777 #define SCI_IRQ { IRQ_SCIINT, NO_IRQ }
778 #define SCI_DMA { 7, 6 }
779 #define UART0_IRQ { IRQ_UARTINT0, NO_IRQ }
780 #define UART0_DMA { 15, 14 }
781 #define UART1_IRQ { IRQ_UARTINT1, NO_IRQ }
782 #define UART1_DMA { 13, 12 }
783 #define UART2_IRQ { IRQ_UARTINT2, NO_IRQ }
784 #define UART2_DMA { 11, 10 }
785 #define SSP_IRQ { IRQ_SSPINT, NO_IRQ }
786 #define SSP_DMA { 9, 8 }
787
788 /* FPGA Primecells */
789 AMBA_DEVICE(aaci, "fpga:04", AACI, NULL);
790 AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &mmc0_plat_data);
791 AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL);
792 AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL);
793
794 /* DevChip Primecells */
795 AMBA_DEVICE(smc, "dev:00", SMC, NULL);
796 AMBA_DEVICE(mpmc, "dev:10", MPMC, NULL);
797 AMBA_DEVICE(clcd, "dev:20", CLCD, &clcd_plat_data);
798 AMBA_DEVICE(dmac, "dev:30", DMAC, NULL);
799 AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
800 AMBA_DEVICE(wdog, "dev:e1", WATCHDOG, NULL);
801 AMBA_DEVICE(gpio0, "dev:e4", GPIO0, &gpio0_plat_data);
802 AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
803 AMBA_DEVICE(rtc, "dev:e8", RTC, NULL);
804 AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
805 AMBA_DEVICE(uart0, "dev:f1", UART0, NULL);
806 AMBA_DEVICE(uart1, "dev:f2", UART1, NULL);
807 AMBA_DEVICE(uart2, "dev:f3", UART2, NULL);
808 AMBA_DEVICE(ssp0, "dev:f4", SSP, &ssp0_plat_data);
809
810 static struct amba_device *amba_devs[] __initdata = {
811 &dmac_device,
812 &uart0_device,
813 &uart1_device,
814 &uart2_device,
815 &smc_device,
816 &mpmc_device,
817 &clcd_device,
818 &sctl_device,
819 &wdog_device,
820 &gpio0_device,
821 &gpio1_device,
822 &rtc_device,
823 &sci0_device,
824 &ssp0_device,
825 &aaci_device,
826 &mmc0_device,
827 &kmi0_device,
828 &kmi1_device,
829 };
830
831 #ifdef CONFIG_LEDS
832 #define VA_LEDS_BASE (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET)
833
834 static void versatile_leds_event(led_event_t ledevt)
835 {
836 unsigned long flags;
837 u32 val;
838
839 local_irq_save(flags);
840 val = readl(VA_LEDS_BASE);
841
842 switch (ledevt) {
843 case led_idle_start:
844 val = val & ~VERSATILE_SYS_LED0;
845 break;
846
847 case led_idle_end:
848 val = val | VERSATILE_SYS_LED0;
849 break;
850
851 case led_timer:
852 val = val ^ VERSATILE_SYS_LED1;
853 break;
854
855 case led_halted:
856 val = 0;
857 break;
858
859 default:
860 break;
861 }
862
863 writel(val, VA_LEDS_BASE);
864 local_irq_restore(flags);
865 }
866 #endif /* CONFIG_LEDS */
867
868 void __init versatile_init(void)
869 {
870 int i;
871
872 osc4_clk.vcoreg = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSCCLCD_OFFSET;
873
874 clkdev_add_table(lookups, ARRAY_SIZE(lookups));
875
876 platform_device_register(&versatile_flash_device);
877 platform_device_register(&versatile_i2c_device);
878 platform_device_register(&smc91x_device);
879 platform_device_register(&char_lcd_device);
880
881 for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
882 struct amba_device *d = amba_devs[i];
883 amba_device_register(d, &iomem_resource);
884 }
885
886 #ifdef CONFIG_LEDS
887 leds_event = versatile_leds_event;
888 #endif
889 }
890
891 /*
892 * The sched_clock counter
893 */
894 #define REFCOUNTER (__io_address(VERSATILE_SYS_BASE) + \
895 VERSATILE_SYS_24MHz_OFFSET)
896
897 /*
898 * Where is the timer (VA)?
899 */
900 #define TIMER0_VA_BASE __io_address(VERSATILE_TIMER0_1_BASE)
901 #define TIMER1_VA_BASE (__io_address(VERSATILE_TIMER0_1_BASE) + 0x20)
902 #define TIMER2_VA_BASE __io_address(VERSATILE_TIMER2_3_BASE)
903 #define TIMER3_VA_BASE (__io_address(VERSATILE_TIMER2_3_BASE) + 0x20)
904
905 /*
906 * Set up timer interrupt, and return the current time in seconds.
907 */
908 static void __init versatile_timer_init(void)
909 {
910 u32 val;
911
912 versatile_sched_clock_init(REFCOUNTER, 24000000);
913
914 /*
915 * set clock frequency:
916 * VERSATILE_REFCLK is 32KHz
917 * VERSATILE_TIMCLK is 1MHz
918 */
919 val = readl(__io_address(VERSATILE_SCTL_BASE));
920 writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) |
921 (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) |
922 (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) |
923 (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val,
924 __io_address(VERSATILE_SCTL_BASE));
925
926 /*
927 * Initialise to a known state (all timers off)
928 */
929 writel(0, TIMER0_VA_BASE + TIMER_CTRL);
930 writel(0, TIMER1_VA_BASE + TIMER_CTRL);
931 writel(0, TIMER2_VA_BASE + TIMER_CTRL);
932 writel(0, TIMER3_VA_BASE + TIMER_CTRL);
933
934 sp804_clocksource_init(TIMER3_VA_BASE);
935 sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMERINT0_1);
936 }
937
938 struct sys_timer versatile_timer = {
939 .init = versatile_timer_init,
940 };
941
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree