?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
thinkpad-acpi: make driver events work in NVRAM poll mode
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / char / synclinkmp.c
blob26de60efe4b247162c3be863bb3a3c66d86d6c49
1 /*
2 * $Id: synclinkmp.c,v 4.38 2005/07/15 13:29:44 paulkf Exp $
3 *
4 * Device driver for Microgate SyncLink Multiport
5 * high speed multiprotocol serial adapter.
6 *
7 * written by Paul Fulghum for Microgate Corporation
8 * paulkf@microgate.com
9 *
10 * Microgate and SyncLink are trademarks of Microgate Corporation
11 *
12 * Derived from serial.c written by Theodore Ts'o and Linus Torvalds
13 * This code is released under the GNU General Public License (GPL)
14 *
15 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
16 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
18 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
19 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
20 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
21 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
23 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
24 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
25 * OF THE POSSIBILITY OF SUCH DAMAGE.
26 */
27
28 #define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq))
29 #if defined(__i386__)
30 # define BREAKPOINT() asm(" int $3");
31 #else
32 # define BREAKPOINT() { }
33 #endif
34
35 #define MAX_DEVICES 12
36
37 #include <linux/module.h>
38 #include <linux/errno.h>
39 #include <linux/signal.h>
40 #include <linux/sched.h>
41 #include <linux/timer.h>
42 #include <linux/interrupt.h>
43 #include <linux/pci.h>
44 #include <linux/tty.h>
45 #include <linux/tty_flip.h>
46 #include <linux/serial.h>
47 #include <linux/major.h>
48 #include <linux/string.h>
49 #include <linux/fcntl.h>
50 #include <linux/ptrace.h>
51 #include <linux/ioport.h>
52 #include <linux/mm.h>
53 #include <linux/seq_file.h>
54 #include <linux/slab.h>
55 #include <linux/netdevice.h>
56 #include <linux/vmalloc.h>
57 #include <linux/init.h>
58 #include <linux/delay.h>
59 #include <linux/ioctl.h>
60
61 #include <asm/system.h>
62 #include <asm/io.h>
63 #include <asm/irq.h>
64 #include <asm/dma.h>
65 #include <linux/bitops.h>
66 #include <asm/types.h>
67 #include <linux/termios.h>
68 #include <linux/workqueue.h>
69 #include <linux/hdlc.h>
70 #include <linux/synclink.h>
71
72 #if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINKMP_MODULE))
73 #define SYNCLINK_GENERIC_HDLC 1
74 #else
75 #define SYNCLINK_GENERIC_HDLC 0
76 #endif
77
78 #define GET_USER(error,value,addr) error = get_user(value,addr)
79 #define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
80 #define PUT_USER(error,value,addr) error = put_user(value,addr)
81 #define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0
82
83 #include <asm/uaccess.h>
84
85 static MGSL_PARAMS default_params = {
86 MGSL_MODE_HDLC, /* unsigned long mode */
87 0, /* unsigned char loopback; */
88 HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */
89 HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */
90 0, /* unsigned long clock_speed; */
91 0xff, /* unsigned char addr_filter; */
92 HDLC_CRC_16_CCITT, /* unsigned short crc_type; */
93 HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */
94 HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */
95 9600, /* unsigned long data_rate; */
96 8, /* unsigned char data_bits; */
97 1, /* unsigned char stop_bits; */
98 ASYNC_PARITY_NONE /* unsigned char parity; */
99 };
100
101 /* size in bytes of DMA data buffers */
102 #define SCABUFSIZE 1024
103 #define SCA_MEM_SIZE 0x40000
104 #define SCA_BASE_SIZE 512
105 #define SCA_REG_SIZE 16
106 #define SCA_MAX_PORTS 4
107 #define SCAMAXDESC 128
108
109 #define BUFFERLISTSIZE 4096
110
111 /* SCA-I style DMA buffer descriptor */
112 typedef struct _SCADESC
113 {
114 u16 next; /* lower l6 bits of next descriptor addr */
115 u16 buf_ptr; /* lower 16 bits of buffer addr */
116 u8 buf_base; /* upper 8 bits of buffer addr */
117 u8 pad1;
118 u16 length; /* length of buffer */
119 u8 status; /* status of buffer */
120 u8 pad2;
121 } SCADESC, *PSCADESC;
122
123 typedef struct _SCADESC_EX
124 {
125 /* device driver bookkeeping section */
126 char *virt_addr; /* virtual address of data buffer */
127 u16 phys_entry; /* lower 16-bits of physical address of this descriptor */
128 } SCADESC_EX, *PSCADESC_EX;
129
130 /* The queue of BH actions to be performed */
131
132 #define BH_RECEIVE 1
133 #define BH_TRANSMIT 2
134 #define BH_STATUS 4
135
136 #define IO_PIN_SHUTDOWN_LIMIT 100
137
138 struct _input_signal_events {
139 int ri_up;
140 int ri_down;
141 int dsr_up;
142 int dsr_down;
143 int dcd_up;
144 int dcd_down;
145 int cts_up;
146 int cts_down;
147 };
148
149 /*
150 * Device instance data structure
151 */
152 typedef struct _synclinkmp_info {
153 void *if_ptr; /* General purpose pointer (used by SPPP) */
154 int magic;
155 struct tty_port port;
156 int line;
157 unsigned short close_delay;
158 unsigned short closing_wait; /* time to wait before closing */
159
160 struct mgsl_icount icount;
161
162 int timeout;
163 int x_char; /* xon/xoff character */
164 u16 read_status_mask1; /* break detection (SR1 indications) */
165 u16 read_status_mask2; /* parity/framing/overun (SR2 indications) */
166 unsigned char ignore_status_mask1; /* break detection (SR1 indications) */
167 unsigned char ignore_status_mask2; /* parity/framing/overun (SR2 indications) */
168 unsigned char *tx_buf;
169 int tx_put;
170 int tx_get;
171 int tx_count;
172
173 wait_queue_head_t status_event_wait_q;
174 wait_queue_head_t event_wait_q;
175 struct timer_list tx_timer; /* HDLC transmit timeout timer */
176 struct _synclinkmp_info *next_device; /* device list link */
177 struct timer_list status_timer; /* input signal status check timer */
178
179 spinlock_t lock; /* spinlock for synchronizing with ISR */
180 struct work_struct task; /* task structure for scheduling bh */
181
182 u32 max_frame_size; /* as set by device config */
183
184 u32 pending_bh;
185
186 bool bh_running; /* Protection from multiple */
187 int isr_overflow;
188 bool bh_requested;
189
190 int dcd_chkcount; /* check counts to prevent */
191 int cts_chkcount; /* too many IRQs if a signal */
192 int dsr_chkcount; /* is floating */
193 int ri_chkcount;
194
195 char *buffer_list; /* virtual address of Rx & Tx buffer lists */
196 unsigned long buffer_list_phys;
197
198 unsigned int rx_buf_count; /* count of total allocated Rx buffers */
199 SCADESC *rx_buf_list; /* list of receive buffer entries */
200 SCADESC_EX rx_buf_list_ex[SCAMAXDESC]; /* list of receive buffer entries */
201 unsigned int current_rx_buf;
202
203 unsigned int tx_buf_count; /* count of total allocated Tx buffers */
204 SCADESC *tx_buf_list; /* list of transmit buffer entries */
205 SCADESC_EX tx_buf_list_ex[SCAMAXDESC]; /* list of transmit buffer entries */
206 unsigned int last_tx_buf;
207
208 unsigned char *tmp_rx_buf;
209 unsigned int tmp_rx_buf_count;
210
211 bool rx_enabled;
212 bool rx_overflow;
213
214 bool tx_enabled;
215 bool tx_active;
216 u32 idle_mode;
217
218 unsigned char ie0_value;
219 unsigned char ie1_value;
220 unsigned char ie2_value;
221 unsigned char ctrlreg_value;
222 unsigned char old_signals;
223
224 char device_name[25]; /* device instance name */
225
226 int port_count;
227 int adapter_num;
228 int port_num;
229
230 struct _synclinkmp_info *port_array[SCA_MAX_PORTS];
231
232 unsigned int bus_type; /* expansion bus type (ISA,EISA,PCI) */
233
234 unsigned int irq_level; /* interrupt level */
235 unsigned long irq_flags;
236 bool irq_requested; /* true if IRQ requested */
237
238 MGSL_PARAMS params; /* communications parameters */
239
240 unsigned char serial_signals; /* current serial signal states */
241
242 bool irq_occurred; /* for diagnostics use */
243 unsigned int init_error; /* Initialization startup error */
244
245 u32 last_mem_alloc;
246 unsigned char* memory_base; /* shared memory address (PCI only) */
247 u32 phys_memory_base;
248 int shared_mem_requested;
249
250 unsigned char* sca_base; /* HD64570 SCA Memory address */
251 u32 phys_sca_base;
252 u32 sca_offset;
253 bool sca_base_requested;
254
255 unsigned char* lcr_base; /* local config registers (PCI only) */
256 u32 phys_lcr_base;
257 u32 lcr_offset;
258 int lcr_mem_requested;
259
260 unsigned char* statctrl_base; /* status/control register memory */
261 u32 phys_statctrl_base;
262 u32 statctrl_offset;
263 bool sca_statctrl_requested;
264
265 u32 misc_ctrl_value;
266 char flag_buf[MAX_ASYNC_BUFFER_SIZE];
267 char char_buf[MAX_ASYNC_BUFFER_SIZE];
268 bool drop_rts_on_tx_done;
269
270 struct _input_signal_events input_signal_events;
271
272 /* SPPP/Cisco HDLC device parts */
273 int netcount;
274 spinlock_t netlock;
275
276 #if SYNCLINK_GENERIC_HDLC
277 struct net_device *netdev;
278 #endif
279
280 } SLMP_INFO;
281
282 #define MGSL_MAGIC 0x5401
283
284 /*
285 * define serial signal status change macros
286 */
287 #define MISCSTATUS_DCD_LATCHED (SerialSignal_DCD<<8) /* indicates change in DCD */
288 #define MISCSTATUS_RI_LATCHED (SerialSignal_RI<<8) /* indicates change in RI */
289 #define MISCSTATUS_CTS_LATCHED (SerialSignal_CTS<<8) /* indicates change in CTS */
290 #define MISCSTATUS_DSR_LATCHED (SerialSignal_DSR<<8) /* change in DSR */
291
292 /* Common Register macros */
293 #define LPR 0x00
294 #define PABR0 0x02
295 #define PABR1 0x03
296 #define WCRL 0x04
297 #define WCRM 0x05
298 #define WCRH 0x06
299 #define DPCR 0x08
300 #define DMER 0x09
301 #define ISR0 0x10
302 #define ISR1 0x11
303 #define ISR2 0x12
304 #define IER0 0x14
305 #define IER1 0x15
306 #define IER2 0x16
307 #define ITCR 0x18
308 #define INTVR 0x1a
309 #define IMVR 0x1c
310
311 /* MSCI Register macros */
312 #define TRB 0x20
313 #define TRBL 0x20
314 #define TRBH 0x21
315 #define SR0 0x22
316 #define SR1 0x23
317 #define SR2 0x24
318 #define SR3 0x25
319 #define FST 0x26
320 #define IE0 0x28
321 #define IE1 0x29
322 #define IE2 0x2a
323 #define FIE 0x2b
324 #define CMD 0x2c
325 #define MD0 0x2e
326 #define MD1 0x2f
327 #define MD2 0x30
328 #define CTL 0x31
329 #define SA0 0x32
330 #define SA1 0x33
331 #define IDL 0x34
332 #define TMC 0x35
333 #define RXS 0x36
334 #define TXS 0x37
335 #define TRC0 0x38
336 #define TRC1 0x39
337 #define RRC 0x3a
338 #define CST0 0x3c
339 #define CST1 0x3d
340
341 /* Timer Register Macros */
342 #define TCNT 0x60
343 #define TCNTL 0x60
344 #define TCNTH 0x61
345 #define TCONR 0x62
346 #define TCONRL 0x62
347 #define TCONRH 0x63
348 #define TMCS 0x64
349 #define TEPR 0x65
350
351 /* DMA Controller Register macros */
352 #define DARL 0x80
353 #define DARH 0x81
354 #define DARB 0x82
355 #define BAR 0x80
356 #define BARL 0x80
357 #define BARH 0x81
358 #define BARB 0x82
359 #define SAR 0x84
360 #define SARL 0x84
361 #define SARH 0x85
362 #define SARB 0x86
363 #define CPB 0x86
364 #define CDA 0x88
365 #define CDAL 0x88
366 #define CDAH 0x89
367 #define EDA 0x8a
368 #define EDAL 0x8a
369 #define EDAH 0x8b
370 #define BFL 0x8c
371 #define BFLL 0x8c
372 #define BFLH 0x8d
373 #define BCR 0x8e
374 #define BCRL 0x8e
375 #define BCRH 0x8f
376 #define DSR 0x90
377 #define DMR 0x91
378 #define FCT 0x93
379 #define DIR 0x94
380 #define DCMD 0x95
381
382 /* combine with timer or DMA register address */
383 #define TIMER0 0x00
384 #define TIMER1 0x08
385 #define TIMER2 0x10
386 #define TIMER3 0x18
387 #define RXDMA 0x00
388 #define TXDMA 0x20
389
390 /* SCA Command Codes */
391 #define NOOP 0x00
392 #define TXRESET 0x01
393 #define TXENABLE 0x02
394 #define TXDISABLE 0x03
395 #define TXCRCINIT 0x04
396 #define TXCRCEXCL 0x05
397 #define TXEOM 0x06
398 #define TXABORT 0x07
399 #define MPON 0x08
400 #define TXBUFCLR 0x09
401 #define RXRESET 0x11
402 #define RXENABLE 0x12
403 #define RXDISABLE 0x13
404 #define RXCRCINIT 0x14
405 #define RXREJECT 0x15
406 #define SEARCHMP 0x16
407 #define RXCRCEXCL 0x17
408 #define RXCRCCALC 0x18
409 #define CHRESET 0x21
410 #define HUNT 0x31
411
412 /* DMA command codes */
413 #define SWABORT 0x01
414 #define FEICLEAR 0x02
415
416 /* IE0 */
417 #define TXINTE BIT7
418 #define RXINTE BIT6
419 #define TXRDYE BIT1
420 #define RXRDYE BIT0
421
422 /* IE1 & SR1 */
423 #define UDRN BIT7
424 #define IDLE BIT6
425 #define SYNCD BIT4
426 #define FLGD BIT4
427 #define CCTS BIT3
428 #define CDCD BIT2
429 #define BRKD BIT1
430 #define ABTD BIT1
431 #define GAPD BIT1
432 #define BRKE BIT0
433 #define IDLD BIT0
434
435 /* IE2 & SR2 */
436 #define EOM BIT7
437 #define PMP BIT6
438 #define SHRT BIT6
439 #define PE BIT5
440 #define ABT BIT5
441 #define FRME BIT4
442 #define RBIT BIT4
443 #define OVRN BIT3
444 #define CRCE BIT2
445
446
447 /*
448 * Global linked list of SyncLink devices
449 */
450 static SLMP_INFO *synclinkmp_device_list = NULL;
451 static int synclinkmp_adapter_count = -1;
452 static int synclinkmp_device_count = 0;
453
454 /*
455 * Set this param to non-zero to load eax with the
456 * .text section address and breakpoint on module load.
457 * This is useful for use with gdb and add-symbol-file command.
458 */
459 static int break_on_load = 0;
460
461 /*
462 * Driver major number, defaults to zero to get auto
463 * assigned major number. May be forced as module parameter.
464 */
465 static int ttymajor = 0;
466
467 /*
468 * Array of user specified options for ISA adapters.
469 */
470 static int debug_level = 0;
471 static int maxframe[MAX_DEVICES] = {0,};
472
473 module_param(break_on_load, bool, 0);
474 module_param(ttymajor, int, 0);
475 module_param(debug_level, int, 0);
476 module_param_array(maxframe, int, NULL, 0);
477
478 static char *driver_name = "SyncLink MultiPort driver";
479 static char *driver_version = "$Revision: 4.38 $";
480
481 static int synclinkmp_init_one(struct pci_dev *dev,const struct pci_device_id *ent);
482 static void synclinkmp_remove_one(struct pci_dev *dev);
483
484 static struct pci_device_id synclinkmp_pci_tbl[] = {
485 { PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_SCA, PCI_ANY_ID, PCI_ANY_ID, },
486 { 0, }, /* terminate list */
487 };
488 MODULE_DEVICE_TABLE(pci, synclinkmp_pci_tbl);
489
490 MODULE_LICENSE("GPL");
491
492 static struct pci_driver synclinkmp_pci_driver = {
493 .name = "synclinkmp",
494 .id_table = synclinkmp_pci_tbl,
495 .probe = synclinkmp_init_one,
496 .remove = __devexit_p(synclinkmp_remove_one),
497 };
498
499
500 static struct tty_driver *serial_driver;
501
502 /* number of characters left in xmit buffer before we ask for more */
503 #define WAKEUP_CHARS 256
504
505
506 /* tty callbacks */
507
508 static int open(struct tty_struct *tty, struct file * filp);
509 static void close(struct tty_struct *tty, struct file * filp);
510 static void hangup(struct tty_struct *tty);
511 static void set_termios(struct tty_struct *tty, struct ktermios *old_termios);
512
513 static int write(struct tty_struct *tty, const unsigned char *buf, int count);
514 static int put_char(struct tty_struct *tty, unsigned char ch);
515 static void send_xchar(struct tty_struct *tty, char ch);
516 static void wait_until_sent(struct tty_struct *tty, int timeout);
517 static int write_room(struct tty_struct *tty);
518 static void flush_chars(struct tty_struct *tty);
519 static void flush_buffer(struct tty_struct *tty);
520 static void tx_hold(struct tty_struct *tty);
521 static void tx_release(struct tty_struct *tty);
522
523 static int ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
524 static int chars_in_buffer(struct tty_struct *tty);
525 static void throttle(struct tty_struct * tty);
526 static void unthrottle(struct tty_struct * tty);
527 static int set_break(struct tty_struct *tty, int break_state);
528
529 #if SYNCLINK_GENERIC_HDLC
530 #define dev_to_port(D) (dev_to_hdlc(D)->priv)
531 static void hdlcdev_tx_done(SLMP_INFO *info);
532 static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size);
533 static int hdlcdev_init(SLMP_INFO *info);
534 static void hdlcdev_exit(SLMP_INFO *info);
535 #endif
536
537 /* ioctl handlers */
538
539 static int get_stats(SLMP_INFO *info, struct mgsl_icount __user *user_icount);
540 static int get_params(SLMP_INFO *info, MGSL_PARAMS __user *params);
541 static int set_params(SLMP_INFO *info, MGSL_PARAMS __user *params);
542 static int get_txidle(SLMP_INFO *info, int __user *idle_mode);
543 static int set_txidle(SLMP_INFO *info, int idle_mode);
544 static int tx_enable(SLMP_INFO *info, int enable);
545 static int tx_abort(SLMP_INFO *info);
546 static int rx_enable(SLMP_INFO *info, int enable);
547 static int modem_input_wait(SLMP_INFO *info,int arg);
548 static int wait_mgsl_event(SLMP_INFO *info, int __user *mask_ptr);
549 static int tiocmget(struct tty_struct *tty, struct file *file);
550 static int tiocmset(struct tty_struct *tty, struct file *file,
551 unsigned int set, unsigned int clear);
552 static int set_break(struct tty_struct *tty, int break_state);
553
554 static void add_device(SLMP_INFO *info);
555 static void device_init(int adapter_num, struct pci_dev *pdev);
556 static int claim_resources(SLMP_INFO *info);
557 static void release_resources(SLMP_INFO *info);
558
559 static int startup(SLMP_INFO *info);
560 static int block_til_ready(struct tty_struct *tty, struct file * filp,SLMP_INFO *info);
561 static int carrier_raised(struct tty_port *port);
562 static void shutdown(SLMP_INFO *info);
563 static void program_hw(SLMP_INFO *info);
564 static void change_params(SLMP_INFO *info);
565
566 static bool init_adapter(SLMP_INFO *info);
567 static bool register_test(SLMP_INFO *info);
568 static bool irq_test(SLMP_INFO *info);
569 static bool loopback_test(SLMP_INFO *info);
570 static int adapter_test(SLMP_INFO *info);
571 static bool memory_test(SLMP_INFO *info);
572
573 static void reset_adapter(SLMP_INFO *info);
574 static void reset_port(SLMP_INFO *info);
575 static void async_mode(SLMP_INFO *info);
576 static void hdlc_mode(SLMP_INFO *info);
577
578 static void rx_stop(SLMP_INFO *info);
579 static void rx_start(SLMP_INFO *info);
580 static void rx_reset_buffers(SLMP_INFO *info);
581 static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last);
582 static bool rx_get_frame(SLMP_INFO *info);
583
584 static void tx_start(SLMP_INFO *info);
585 static void tx_stop(SLMP_INFO *info);
586 static void tx_load_fifo(SLMP_INFO *info);
587 static void tx_set_idle(SLMP_INFO *info);
588 static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count);
589
590 static void get_signals(SLMP_INFO *info);
591 static void set_signals(SLMP_INFO *info);
592 static void enable_loopback(SLMP_INFO *info, int enable);
593 static void set_rate(SLMP_INFO *info, u32 data_rate);
594
595 static int bh_action(SLMP_INFO *info);
596 static void bh_handler(struct work_struct *work);
597 static void bh_receive(SLMP_INFO *info);
598 static void bh_transmit(SLMP_INFO *info);
599 static void bh_status(SLMP_INFO *info);
600 static void isr_timer(SLMP_INFO *info);
601 static void isr_rxint(SLMP_INFO *info);
602 static void isr_rxrdy(SLMP_INFO *info);
603 static void isr_txint(SLMP_INFO *info);
604 static void isr_txrdy(SLMP_INFO *info);
605 static void isr_rxdmaok(SLMP_INFO *info);
606 static void isr_rxdmaerror(SLMP_INFO *info);
607 static void isr_txdmaok(SLMP_INFO *info);
608 static void isr_txdmaerror(SLMP_INFO *info);
609 static void isr_io_pin(SLMP_INFO *info, u16 status);
610
611 static int alloc_dma_bufs(SLMP_INFO *info);
612 static void free_dma_bufs(SLMP_INFO *info);
613 static int alloc_buf_list(SLMP_INFO *info);
614 static int alloc_frame_bufs(SLMP_INFO *info, SCADESC *list, SCADESC_EX *list_ex,int count);
615 static int alloc_tmp_rx_buf(SLMP_INFO *info);
616 static void free_tmp_rx_buf(SLMP_INFO *info);
617
618 static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count);
619 static void trace_block(SLMP_INFO *info, const char* data, int count, int xmit);
620 static void tx_timeout(unsigned long context);
621 static void status_timeout(unsigned long context);
622
623 static unsigned char read_reg(SLMP_INFO *info, unsigned char addr);
624 static void write_reg(SLMP_INFO *info, unsigned char addr, unsigned char val);
625 static u16 read_reg16(SLMP_INFO *info, unsigned char addr);
626 static void write_reg16(SLMP_INFO *info, unsigned char addr, u16 val);
627 static unsigned char read_status_reg(SLMP_INFO * info);
628 static void write_control_reg(SLMP_INFO * info);
629
630
631 static unsigned char rx_active_fifo_level = 16; // rx request FIFO activation level in bytes
632 static unsigned char tx_active_fifo_level = 16; // tx request FIFO activation level in bytes
633 static unsigned char tx_negate_fifo_level = 32; // tx request FIFO negation level in bytes
634
635 static u32 misc_ctrl_value = 0x007e4040;
636 static u32 lcr1_brdr_value = 0x00800028;
637
638 static u32 read_ahead_count = 8;
639
640 /* DPCR, DMA Priority Control
641 *
642 * 07..05 Not used, must be 0
643 * 04 BRC, bus release condition: 0=all transfers complete
644 * 1=release after 1 xfer on all channels
645 * 03 CCC, channel change condition: 0=every cycle
646 * 1=after each channel completes all xfers
647 * 02..00 PR<2..0>, priority 100=round robin
648 *
649 * 00000100 = 0x00
650 */
651 static unsigned char dma_priority = 0x04;
652
653 // Number of bytes that can be written to shared RAM
654 // in a single write operation
655 static u32 sca_pci_load_interval = 64;
656
657 /*
658 * 1st function defined in .text section. Calling this function in
659 * init_module() followed by a breakpoint allows a remote debugger
660 * (gdb) to get the .text address for the add-symbol-file command.
661 * This allows remote debugging of dynamically loadable modules.
662 */
663 static void* synclinkmp_get_text_ptr(void);
664 static void* synclinkmp_get_text_ptr(void) {return synclinkmp_get_text_ptr;}
665
666 static inline int sanity_check(SLMP_INFO *info,
667 char *name, const char *routine)
668 {
669 #ifdef SANITY_CHECK
670 static const char *badmagic =
671 "Warning: bad magic number for synclinkmp_struct (%s) in %s\n";
672 static const char *badinfo =
673 "Warning: null synclinkmp_struct for (%s) in %s\n";
674
675 if (!info) {
676 printk(badinfo, name, routine);
677 return 1;
678 }
679 if (info->magic != MGSL_MAGIC) {
680 printk(badmagic, name, routine);
681 return 1;
682 }
683 #else
684 if (!info)
685 return 1;
686 #endif
687 return 0;
688 }
689
690 /**
691 * line discipline callback wrappers
692 *
693 * The wrappers maintain line discipline references
694 * while calling into the line discipline.
695 *
696 * ldisc_receive_buf - pass receive data to line discipline
697 */
698
699 static void ldisc_receive_buf(struct tty_struct *tty,
700 const __u8 *data, char *flags, int count)
701 {
702 struct tty_ldisc *ld;
703 if (!tty)
704 return;
705 ld = tty_ldisc_ref(tty);
706 if (ld) {
707 if (ld->ops->receive_buf)
708 ld->ops->receive_buf(tty, data, flags, count);
709 tty_ldisc_deref(ld);
710 }
711 }
712
713 /* tty callbacks */
714
715 /* Called when a port is opened. Init and enable port.
716 */
717 static int open(struct tty_struct *tty, struct file *filp)
718 {
719 SLMP_INFO *info;
720 int retval, line;
721 unsigned long flags;
722
723 line = tty->index;
724 if ((line < 0) || (line >= synclinkmp_device_count)) {
725 printk("%s(%d): open with invalid line #%d.\n",
726 __FILE__,__LINE__,line);
727 return -ENODEV;
728 }
729
730 info = synclinkmp_device_list;
731 while(info && info->line != line)
732 info = info->next_device;
733 if (sanity_check(info, tty->name, "open"))
734 return -ENODEV;
735 if ( info->init_error ) {
736 printk("%s(%d):%s device is not allocated, init error=%d\n",
737 __FILE__,__LINE__,info->device_name,info->init_error);
738 return -ENODEV;
739 }
740
741 tty->driver_data = info;
742 info->port.tty = tty;
743
744 if (debug_level >= DEBUG_LEVEL_INFO)
745 printk("%s(%d):%s open(), old ref count = %d\n",
746 __FILE__,__LINE__,tty->driver->name, info->port.count);
747
748 /* If port is closing, signal caller to try again */
749 if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){
750 if (info->port.flags & ASYNC_CLOSING)
751 interruptible_sleep_on(&info->port.close_wait);
752 retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
753 -EAGAIN : -ERESTARTSYS);
754 goto cleanup;
755 }
756
757 info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
758
759 spin_lock_irqsave(&info->netlock, flags);
760 if (info->netcount) {
761 retval = -EBUSY;
762 spin_unlock_irqrestore(&info->netlock, flags);
763 goto cleanup;
764 }
765 info->port.count++;
766 spin_unlock_irqrestore(&info->netlock, flags);
767
768 if (info->port.count == 1) {
769 /* 1st open on this device, init hardware */
770 retval = startup(info);
771 if (retval < 0)
772 goto cleanup;
773 }
774
775 retval = block_til_ready(tty, filp, info);
776 if (retval) {
777 if (debug_level >= DEBUG_LEVEL_INFO)
778 printk("%s(%d):%s block_til_ready() returned %d\n",
779 __FILE__,__LINE__, info->device_name, retval);
780 goto cleanup;
781 }
782
783 if (debug_level >= DEBUG_LEVEL_INFO)
784 printk("%s(%d):%s open() success\n",
785 __FILE__,__LINE__, info->device_name);
786 retval = 0;
787
788 cleanup:
789 if (retval) {
790 if (tty->count == 1)
791 info->port.tty = NULL; /* tty layer will release tty struct */
792 if(info->port.count)
793 info->port.count--;
794 }
795
796 return retval;
797 }
798
799 /* Called when port is closed. Wait for remaining data to be
800 * sent. Disable port and free resources.
801 */
802 static void close(struct tty_struct *tty, struct file *filp)
803 {
804 SLMP_INFO * info = tty->driver_data;
805
806 if (sanity_check(info, tty->name, "close"))
807 return;
808
809 if (debug_level >= DEBUG_LEVEL_INFO)
810 printk("%s(%d):%s close() entry, count=%d\n",
811 __FILE__,__LINE__, info->device_name, info->port.count);
812
813 if (tty_port_close_start(&info->port, tty, filp) == 0)
814 goto cleanup;
815
816 if (info->port.flags & ASYNC_INITIALIZED)
817 wait_until_sent(tty, info->timeout);
818
819 flush_buffer(tty);
820 tty_ldisc_flush(tty);
821 shutdown(info);
822
823 tty_port_close_end(&info->port, tty);
824 info->port.tty = NULL;
825 cleanup:
826 if (debug_level >= DEBUG_LEVEL_INFO)
827 printk("%s(%d):%s close() exit, count=%d\n", __FILE__,__LINE__,
828 tty->driver->name, info->port.count);
829 }
830
831 /* Called by tty_hangup() when a hangup is signaled.
832 * This is the same as closing all open descriptors for the port.
833 */
834 static void hangup(struct tty_struct *tty)
835 {
836 SLMP_INFO *info = tty->driver_data;
837
838 if (debug_level >= DEBUG_LEVEL_INFO)
839 printk("%s(%d):%s hangup()\n",
840 __FILE__,__LINE__, info->device_name );
841
842 if (sanity_check(info, tty->name, "hangup"))
843 return;
844
845 flush_buffer(tty);
846 shutdown(info);
847
848 info->port.count = 0;
849 info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
850 info->port.tty = NULL;
851
852 wake_up_interruptible(&info->port.open_wait);
853 }
854
855 /* Set new termios settings
856 */
857 static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
858 {
859 SLMP_INFO *info = tty->driver_data;
860 unsigned long flags;
861
862 if (debug_level >= DEBUG_LEVEL_INFO)
863 printk("%s(%d):%s set_termios()\n", __FILE__,__LINE__,
864 tty->driver->name );
865
866 change_params(info);
867
868 /* Handle transition to B0 status */
869 if (old_termios->c_cflag & CBAUD &&
870 !(tty->termios->c_cflag & CBAUD)) {
871 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
872 spin_lock_irqsave(&info->lock,flags);
873 set_signals(info);
874 spin_unlock_irqrestore(&info->lock,flags);
875 }
876
877 /* Handle transition away from B0 status */
878 if (!(old_termios->c_cflag & CBAUD) &&
879 tty->termios->c_cflag & CBAUD) {
880 info->serial_signals |= SerialSignal_DTR;
881 if (!(tty->termios->c_cflag & CRTSCTS) ||
882 !test_bit(TTY_THROTTLED, &tty->flags)) {
883 info->serial_signals |= SerialSignal_RTS;
884 }
885 spin_lock_irqsave(&info->lock,flags);
886 set_signals(info);
887 spin_unlock_irqrestore(&info->lock,flags);
888 }
889
890 /* Handle turning off CRTSCTS */
891 if (old_termios->c_cflag & CRTSCTS &&
892 !(tty->termios->c_cflag & CRTSCTS)) {
893 tty->hw_stopped = 0;
894 tx_release(tty);
895 }
896 }
897
898 /* Send a block of data
899 *
900 * Arguments:
901 *
902 * tty pointer to tty information structure
903 * buf pointer to buffer containing send data
904 * count size of send data in bytes
905 *
906 * Return Value: number of characters written
907 */
908 static int write(struct tty_struct *tty,
909 const unsigned char *buf, int count)
910 {
911 int c, ret = 0;
912 SLMP_INFO *info = tty->driver_data;
913 unsigned long flags;
914
915 if (debug_level >= DEBUG_LEVEL_INFO)
916 printk("%s(%d):%s write() count=%d\n",
917 __FILE__,__LINE__,info->device_name,count);
918
919 if (sanity_check(info, tty->name, "write"))
920 goto cleanup;
921
922 if (!info->tx_buf)
923 goto cleanup;
924
925 if (info->params.mode == MGSL_MODE_HDLC) {
926 if (count > info->max_frame_size) {
927 ret = -EIO;
928 goto cleanup;
929 }
930 if (info->tx_active)
931 goto cleanup;
932 if (info->tx_count) {
933 /* send accumulated data from send_char() calls */
934 /* as frame and wait before accepting more data. */
935 tx_load_dma_buffer(info, info->tx_buf, info->tx_count);
936 goto start;
937 }
938 ret = info->tx_count = count;
939 tx_load_dma_buffer(info, buf, count);
940 goto start;
941 }
942
943 for (;;) {
944 c = min_t(int, count,
945 min(info->max_frame_size - info->tx_count - 1,
946 info->max_frame_size - info->tx_put));
947 if (c <= 0)
948 break;
949
950 memcpy(info->tx_buf + info->tx_put, buf, c);
951
952 spin_lock_irqsave(&info->lock,flags);
953 info->tx_put += c;
954 if (info->tx_put >= info->max_frame_size)
955 info->tx_put -= info->max_frame_size;
956 info->tx_count += c;
957 spin_unlock_irqrestore(&info->lock,flags);
958
959 buf += c;
960 count -= c;
961 ret += c;
962 }
963
964 if (info->params.mode == MGSL_MODE_HDLC) {
965 if (count) {
966 ret = info->tx_count = 0;
967 goto cleanup;
968 }
969 tx_load_dma_buffer(info, info->tx_buf, info->tx_count);
970 }
971 start:
972 if (info->tx_count && !tty->stopped && !tty->hw_stopped) {
973 spin_lock_irqsave(&info->lock,flags);
974 if (!info->tx_active)
975 tx_start(info);
976 spin_unlock_irqrestore(&info->lock,flags);
977 }
978
979 cleanup:
980 if (debug_level >= DEBUG_LEVEL_INFO)
981 printk( "%s(%d):%s write() returning=%d\n",
982 __FILE__,__LINE__,info->device_name,ret);
983 return ret;
984 }
985
986 /* Add a character to the transmit buffer.
987 */
988 static int put_char(struct tty_struct *tty, unsigned char ch)
989 {
990 SLMP_INFO *info = tty->driver_data;
991 unsigned long flags;
992 int ret = 0;
993
994 if ( debug_level >= DEBUG_LEVEL_INFO ) {
995 printk( "%s(%d):%s put_char(%d)\n",
996 __FILE__,__LINE__,info->device_name,ch);
997 }
998
999 if (sanity_check(info, tty->name, "put_char"))
1000 return 0;
1001
1002 if (!info->tx_buf)
1003 return 0;
1004
1005 spin_lock_irqsave(&info->lock,flags);
1006
1007 if ( (info->params.mode != MGSL_MODE_HDLC) ||
1008 !info->tx_active ) {
1009
1010 if (info->tx_count < info->max_frame_size - 1) {
1011 info->tx_buf[info->tx_put++] = ch;
1012 if (info->tx_put >= info->max_frame_size)
1013 info->tx_put -= info->max_frame_size;
1014 info->tx_count++;
1015 ret = 1;
1016 }
1017 }
1018
1019 spin_unlock_irqrestore(&info->lock,flags);
1020 return ret;
1021 }
1022
1023 /* Send a high-priority XON/XOFF character
1024 */
1025 static void send_xchar(struct tty_struct *tty, char ch)
1026 {
1027 SLMP_INFO *info = tty->driver_data;
1028 unsigned long flags;
1029
1030 if (debug_level >= DEBUG_LEVEL_INFO)
1031 printk("%s(%d):%s send_xchar(%d)\n",
1032 __FILE__,__LINE__, info->device_name, ch );
1033
1034 if (sanity_check(info, tty->name, "send_xchar"))
1035 return;
1036
1037 info->x_char = ch;
1038 if (ch) {
1039 /* Make sure transmit interrupts are on */
1040 spin_lock_irqsave(&info->lock,flags);
1041 if (!info->tx_enabled)
1042 tx_start(info);
1043 spin_unlock_irqrestore(&info->lock,flags);
1044 }
1045 }
1046
1047 /* Wait until the transmitter is empty.
1048 */
1049 static void wait_until_sent(struct tty_struct *tty, int timeout)
1050 {
1051 SLMP_INFO * info = tty->driver_data;
1052 unsigned long orig_jiffies, char_time;
1053
1054 if (!info )
1055 return;
1056
1057 if (debug_level >= DEBUG_LEVEL_INFO)
1058 printk("%s(%d):%s wait_until_sent() entry\n",
1059 __FILE__,__LINE__, info->device_name );
1060
1061 if (sanity_check(info, tty->name, "wait_until_sent"))
1062 return;
1063
1064 lock_kernel();
1065
1066 if (!(info->port.flags & ASYNC_INITIALIZED))
1067 goto exit;
1068
1069 orig_jiffies = jiffies;
1070
1071 /* Set check interval to 1/5 of estimated time to
1072 * send a character, and make it at least 1. The check
1073 * interval should also be less than the timeout.
1074 * Note: use tight timings here to satisfy the NIST-PCTS.
1075 */
1076
1077 if ( info->params.data_rate ) {
1078 char_time = info->timeout/(32 * 5);
1079 if (!char_time)
1080 char_time++;
1081 } else
1082 char_time = 1;
1083
1084 if (timeout)
1085 char_time = min_t(unsigned long, char_time, timeout);
1086
1087 if ( info->params.mode == MGSL_MODE_HDLC ) {
1088 while (info->tx_active) {
1089 msleep_interruptible(jiffies_to_msecs(char_time));
1090 if (signal_pending(current))
1091 break;
1092 if (timeout && time_after(jiffies, orig_jiffies + timeout))
1093 break;
1094 }
1095 } else {
1096 //TODO: determine if there is something similar to USC16C32
1097 // TXSTATUS_ALL_SENT status
1098 while ( info->tx_active && info->tx_enabled) {
1099 msleep_interruptible(jiffies_to_msecs(char_time));
1100 if (signal_pending(current))
1101 break;
1102 if (timeout && time_after(jiffies, orig_jiffies + timeout))
1103 break;
1104 }
1105 }
1106
1107 exit:
1108 unlock_kernel();
1109 if (debug_level >= DEBUG_LEVEL_INFO)
1110 printk("%s(%d):%s wait_until_sent() exit\n",
1111 __FILE__,__LINE__, info->device_name );
1112 }
1113
1114 /* Return the count of free bytes in transmit buffer
1115 */
1116 static int write_room(struct tty_struct *tty)
1117 {
1118 SLMP_INFO *info = tty->driver_data;
1119 int ret;
1120
1121 if (sanity_check(info, tty->name, "write_room"))
1122 return 0;
1123
1124 lock_kernel();
1125 if (info->params.mode == MGSL_MODE_HDLC) {
1126 ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE;
1127 } else {
1128 ret = info->max_frame_size - info->tx_count - 1;
1129 if (ret < 0)
1130 ret = 0;
1131 }
1132 unlock_kernel();
1133
1134 if (debug_level >= DEBUG_LEVEL_INFO)
1135 printk("%s(%d):%s write_room()=%d\n",
1136 __FILE__, __LINE__, info->device_name, ret);
1137
1138 return ret;
1139 }
1140
1141 /* enable transmitter and send remaining buffered characters
1142 */
1143 static void flush_chars(struct tty_struct *tty)
1144 {
1145 SLMP_INFO *info = tty->driver_data;
1146 unsigned long flags;
1147
1148 if ( debug_level >= DEBUG_LEVEL_INFO )
1149 printk( "%s(%d):%s flush_chars() entry tx_count=%d\n",
1150 __FILE__,__LINE__,info->device_name,info->tx_count);
1151
1152 if (sanity_check(info, tty->name, "flush_chars"))
1153 return;
1154
1155 if (info->tx_count <= 0 || tty->stopped || tty->hw_stopped ||
1156 !info->tx_buf)
1157 return;
1158
1159 if ( debug_level >= DEBUG_LEVEL_INFO )
1160 printk( "%s(%d):%s flush_chars() entry, starting transmitter\n",
1161 __FILE__,__LINE__,info->device_name );
1162
1163 spin_lock_irqsave(&info->lock,flags);
1164
1165 if (!info->tx_active) {
1166 if ( (info->params.mode == MGSL_MODE_HDLC) &&
1167 info->tx_count ) {
1168 /* operating in synchronous (frame oriented) mode */
1169 /* copy data from circular tx_buf to */
1170 /* transmit DMA buffer. */
1171 tx_load_dma_buffer(info,
1172 info->tx_buf,info->tx_count);
1173 }
1174 tx_start(info);
1175 }
1176
1177 spin_unlock_irqrestore(&info->lock,flags);
1178 }
1179
1180 /* Discard all data in the send buffer
1181 */
1182 static void flush_buffer(struct tty_struct *tty)
1183 {
1184 SLMP_INFO *info = tty->driver_data;
1185 unsigned long flags;
1186
1187 if (debug_level >= DEBUG_LEVEL_INFO)
1188 printk("%s(%d):%s flush_buffer() entry\n",
1189 __FILE__,__LINE__, info->device_name );
1190
1191 if (sanity_check(info, tty->name, "flush_buffer"))
1192 return;
1193
1194 spin_lock_irqsave(&info->lock,flags);
1195 info->tx_count = info->tx_put = info->tx_get = 0;
1196 del_timer(&info->tx_timer);
1197 spin_unlock_irqrestore(&info->lock,flags);
1198
1199 tty_wakeup(tty);
1200 }
1201
1202 /* throttle (stop) transmitter
1203 */
1204 static void tx_hold(struct tty_struct *tty)
1205 {
1206 SLMP_INFO *info = tty->driver_data;
1207 unsigned long flags;
1208
1209 if (sanity_check(info, tty->name, "tx_hold"))
1210 return;
1211
1212 if ( debug_level >= DEBUG_LEVEL_INFO )
1213 printk("%s(%d):%s tx_hold()\n",
1214 __FILE__,__LINE__,info->device_name);
1215
1216 spin_lock_irqsave(&info->lock,flags);
1217 if (info->tx_enabled)
1218 tx_stop(info);
1219 spin_unlock_irqrestore(&info->lock,flags);
1220 }
1221
1222 /* release (start) transmitter
1223 */
1224 static void tx_release(struct tty_struct *tty)
1225 {
1226 SLMP_INFO *info = tty->driver_data;
1227 unsigned long flags;
1228
1229 if (sanity_check(info, tty->name, "tx_release"))
1230 return;
1231
1232 if ( debug_level >= DEBUG_LEVEL_INFO )
1233 printk("%s(%d):%s tx_release()\n",
1234 __FILE__,__LINE__,info->device_name);
1235
1236 spin_lock_irqsave(&info->lock,flags);
1237 if (!info->tx_enabled)
1238 tx_start(info);
1239 spin_unlock_irqrestore(&info->lock,flags);
1240 }
1241
1242 /* Service an IOCTL request
1243 *
1244 * Arguments:
1245 *
1246 * tty pointer to tty instance data
1247 * file pointer to associated file object for device
1248 * cmd IOCTL command code
1249 * arg command argument/context
1250 *
1251 * Return Value: 0 if success, otherwise error code
1252 */
1253 static int do_ioctl(struct tty_struct *tty, struct file *file,
1254 unsigned int cmd, unsigned long arg)
1255 {
1256 SLMP_INFO *info = tty->driver_data;
1257 int error;
1258 struct mgsl_icount cnow; /* kernel counter temps */
1259 struct serial_icounter_struct __user *p_cuser; /* user space */
1260 unsigned long flags;
1261 void __user *argp = (void __user *)arg;
1262
1263 if (debug_level >= DEBUG_LEVEL_INFO)
1264 printk("%s(%d):%s ioctl() cmd=%08X\n", __FILE__,__LINE__,
1265 info->device_name, cmd );
1266
1267 if (sanity_check(info, tty->name, "ioctl"))
1268 return -ENODEV;
1269
1270 if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
1271 (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
1272 if (tty->flags & (1 << TTY_IO_ERROR))
1273 return -EIO;
1274 }
1275
1276 switch (cmd) {
1277 case MGSL_IOCGPARAMS:
1278 return get_params(info, argp);
1279 case MGSL_IOCSPARAMS:
1280 return set_params(info, argp);
1281 case MGSL_IOCGTXIDLE:
1282 return get_txidle(info, argp);
1283 case MGSL_IOCSTXIDLE:
1284 return set_txidle(info, (int)arg);
1285 case MGSL_IOCTXENABLE:
1286 return tx_enable(info, (int)arg);
1287 case MGSL_IOCRXENABLE:
1288 return rx_enable(info, (int)arg);
1289 case MGSL_IOCTXABORT:
1290 return tx_abort(info);
1291 case MGSL_IOCGSTATS:
1292 return get_stats(info, argp);
1293 case MGSL_IOCWAITEVENT:
1294 return wait_mgsl_event(info, argp);
1295 case MGSL_IOCLOOPTXDONE:
1296 return 0; // TODO: Not supported, need to document
1297 /* Wait for modem input (DCD,RI,DSR,CTS) change
1298 * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS)
1299 */
1300 case TIOCMIWAIT:
1301 return modem_input_wait(info,(int)arg);
1302
1303 /*
1304 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
1305 * Return: write counters to the user passed counter struct
1306 * NB: both 1->0 and 0->1 transitions are counted except for
1307 * RI where only 0->1 is counted.
1308 */
1309 case TIOCGICOUNT:
1310 spin_lock_irqsave(&info->lock,flags);
1311 cnow = info->icount;
1312 spin_unlock_irqrestore(&info->lock,flags);
1313 p_cuser = argp;
1314 PUT_USER(error,cnow.cts, &p_cuser->cts);
1315 if (error) return error;
1316 PUT_USER(error,cnow.dsr, &p_cuser->dsr);
1317 if (error) return error;
1318 PUT_USER(error,cnow.rng, &p_cuser->rng);
1319 if (error) return error;
1320 PUT_USER(error,cnow.dcd, &p_cuser->dcd);
1321 if (error) return error;
1322 PUT_USER(error,cnow.rx, &p_cuser->rx);
1323 if (error) return error;
1324 PUT_USER(error,cnow.tx, &p_cuser->tx);
1325 if (error) return error;
1326 PUT_USER(error,cnow.frame, &p_cuser->frame);
1327 if (error) return error;
1328 PUT_USER(error,cnow.overrun, &p_cuser->overrun);
1329 if (error) return error;
1330 PUT_USER(error,cnow.parity, &p_cuser->parity);
1331 if (error) return error;
1332 PUT_USER(error,cnow.brk, &p_cuser->brk);
1333 if (error) return error;
1334 PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun);
1335 if (error) return error;
1336 return 0;
1337 default:
1338 return -ENOIOCTLCMD;
1339 }
1340 return 0;
1341 }
1342
1343 static int ioctl(struct tty_struct *tty, struct file *file,
1344 unsigned int cmd, unsigned long arg)
1345 {
1346 int ret;
1347 lock_kernel();
1348 ret = do_ioctl(tty, file, cmd, arg);
1349 unlock_kernel();
1350 return ret;
1351 }
1352
1353 /*
1354 * /proc fs routines....
1355 */
1356
1357 static inline void line_info(struct seq_file *m, SLMP_INFO *info)
1358 {
1359 char stat_buf[30];
1360 unsigned long flags;
1361
1362 seq_printf(m, "%s: SCABase=%08x Mem=%08X StatusControl=%08x LCR=%08X\n"
1363 "\tIRQ=%d MaxFrameSize=%u\n",
1364 info->device_name,
1365 info->phys_sca_base,
1366 info->phys_memory_base,
1367 info->phys_statctrl_base,
1368 info->phys_lcr_base,
1369 info->irq_level,
1370 info->max_frame_size );
1371
1372 /* output current serial signal states */
1373 spin_lock_irqsave(&info->lock,flags);
1374 get_signals(info);
1375 spin_unlock_irqrestore(&info->lock,flags);
1376
1377 stat_buf[0] = 0;
1378 stat_buf[1] = 0;
1379 if (info->serial_signals & SerialSignal_RTS)
1380 strcat(stat_buf, "|RTS");
1381 if (info->serial_signals & SerialSignal_CTS)
1382 strcat(stat_buf, "|CTS");
1383 if (info->serial_signals & SerialSignal_DTR)
1384 strcat(stat_buf, "|DTR");
1385 if (info->serial_signals & SerialSignal_DSR)
1386 strcat(stat_buf, "|DSR");
1387 if (info->serial_signals & SerialSignal_DCD)
1388 strcat(stat_buf, "|CD");
1389 if (info->serial_signals & SerialSignal_RI)
1390 strcat(stat_buf, "|RI");
1391
1392 if (info->params.mode == MGSL_MODE_HDLC) {
1393 seq_printf(m, "\tHDLC txok:%d rxok:%d",
1394 info->icount.txok, info->icount.rxok);
1395 if (info->icount.txunder)
1396 seq_printf(m, " txunder:%d", info->icount.txunder);
1397 if (info->icount.txabort)
1398 seq_printf(m, " txabort:%d", info->icount.txabort);
1399 if (info->icount.rxshort)
1400 seq_printf(m, " rxshort:%d", info->icount.rxshort);
1401 if (info->icount.rxlong)
1402 seq_printf(m, " rxlong:%d", info->icount.rxlong);
1403 if (info->icount.rxover)
1404 seq_printf(m, " rxover:%d", info->icount.rxover);
1405 if (info->icount.rxcrc)
1406 seq_printf(m, " rxlong:%d", info->icount.rxcrc);
1407 } else {
1408 seq_printf(m, "\tASYNC tx:%d rx:%d",
1409 info->icount.tx, info->icount.rx);
1410 if (info->icount.frame)
1411 seq_printf(m, " fe:%d", info->icount.frame);
1412 if (info->icount.parity)
1413 seq_printf(m, " pe:%d", info->icount.parity);
1414 if (info->icount.brk)
1415 seq_printf(m, " brk:%d", info->icount.brk);
1416 if (info->icount.overrun)
1417 seq_printf(m, " oe:%d", info->icount.overrun);
1418 }
1419
1420 /* Append serial signal status to end */
1421 seq_printf(m, " %s\n", stat_buf+1);
1422
1423 seq_printf(m, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
1424 info->tx_active,info->bh_requested,info->bh_running,
1425 info->pending_bh);
1426 }
1427
1428 /* Called to print information about devices
1429 */
1430 static int synclinkmp_proc_show(struct seq_file *m, void *v)
1431 {
1432 SLMP_INFO *info;
1433
1434 seq_printf(m, "synclinkmp driver:%s\n", driver_version);
1435
1436 info = synclinkmp_device_list;
1437 while( info ) {
1438 line_info(m, info);
1439 info = info->next_device;
1440 }
1441 return 0;
1442 }
1443
1444 static int synclinkmp_proc_open(struct inode *inode, struct file *file)
1445 {
1446 return single_open(file, synclinkmp_proc_show, NULL);
1447 }
1448
1449 static const struct file_operations synclinkmp_proc_fops = {
1450 .owner = THIS_MODULE,
1451 .open = synclinkmp_proc_open,
1452 .read = seq_read,
1453 .llseek = seq_lseek,
1454 .release = single_release,
1455 };
1456
1457 /* Return the count of bytes in transmit buffer
1458 */
1459 static int chars_in_buffer(struct tty_struct *tty)
1460 {
1461 SLMP_INFO *info = tty->driver_data;
1462
1463 if (sanity_check(info, tty->name, "chars_in_buffer"))
1464 return 0;
1465
1466 if (debug_level >= DEBUG_LEVEL_INFO)
1467 printk("%s(%d):%s chars_in_buffer()=%d\n",
1468 __FILE__, __LINE__, info->device_name, info->tx_count);
1469
1470 return info->tx_count;
1471 }
1472
1473 /* Signal remote device to throttle send data (our receive data)
1474 */
1475 static void throttle(struct tty_struct * tty)
1476 {
1477 SLMP_INFO *info = tty->driver_data;
1478 unsigned long flags;
1479
1480 if (debug_level >= DEBUG_LEVEL_INFO)
1481 printk("%s(%d):%s throttle() entry\n",
1482 __FILE__,__LINE__, info->device_name );
1483
1484 if (sanity_check(info, tty->name, "throttle"))
1485 return;
1486
1487 if (I_IXOFF(tty))
1488 send_xchar(tty, STOP_CHAR(tty));
1489
1490 if (tty->termios->c_cflag & CRTSCTS) {
1491 spin_lock_irqsave(&info->lock,flags);
1492 info->serial_signals &= ~SerialSignal_RTS;
1493 set_signals(info);
1494 spin_unlock_irqrestore(&info->lock,flags);
1495 }
1496 }
1497
1498 /* Signal remote device to stop throttling send data (our receive data)
1499 */
1500 static void unthrottle(struct tty_struct * tty)
1501 {
1502 SLMP_INFO *info = tty->driver_data;
1503 unsigned long flags;
1504
1505 if (debug_level >= DEBUG_LEVEL_INFO)
1506 printk("%s(%d):%s unthrottle() entry\n",
1507 __FILE__,__LINE__, info->device_name );
1508
1509 if (sanity_check(info, tty->name, "unthrottle"))
1510 return;
1511
1512 if (I_IXOFF(tty)) {
1513 if (info->x_char)
1514 info->x_char = 0;
1515 else
1516 send_xchar(tty, START_CHAR(tty));
1517 }
1518
1519 if (tty->termios->c_cflag & CRTSCTS) {
1520 spin_lock_irqsave(&info->lock,flags);
1521 info->serial_signals |= SerialSignal_RTS;
1522 set_signals(info);
1523 spin_unlock_irqrestore(&info->lock,flags);
1524 }
1525 }
1526
1527 /* set or clear transmit break condition
1528 * break_state -1=set break condition, 0=clear
1529 */
1530 static int set_break(struct tty_struct *tty, int break_state)
1531 {
1532 unsigned char RegValue;
1533 SLMP_INFO * info = tty->driver_data;
1534 unsigned long flags;
1535
1536 if (debug_level >= DEBUG_LEVEL_INFO)
1537 printk("%s(%d):%s set_break(%d)\n",
1538 __FILE__,__LINE__, info->device_name, break_state);
1539
1540 if (sanity_check(info, tty->name, "set_break"))
1541 return -EINVAL;
1542
1543 spin_lock_irqsave(&info->lock,flags);
1544 RegValue = read_reg(info, CTL);
1545 if (break_state == -1)
1546 RegValue |= BIT3;
1547 else
1548 RegValue &= ~BIT3;
1549 write_reg(info, CTL, RegValue);
1550 spin_unlock_irqrestore(&info->lock,flags);
1551 return 0;
1552 }
1553
1554 #if SYNCLINK_GENERIC_HDLC
1555
1556 /**
1557 * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
1558 * set encoding and frame check sequence (FCS) options
1559 *
1560 * dev pointer to network device structure
1561 * encoding serial encoding setting
1562 * parity FCS setting
1563 *
1564 * returns 0 if success, otherwise error code
1565 */
1566 static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
1567 unsigned short parity)
1568 {
1569 SLMP_INFO *info = dev_to_port(dev);
1570 unsigned char new_encoding;
1571 unsigned short new_crctype;
1572
1573 /* return error if TTY interface open */
1574 if (info->port.count)
1575 return -EBUSY;
1576
1577 switch (encoding)
1578 {
1579 case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break;
1580 case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
1581 case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
1582 case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
1583 case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
1584 default: return -EINVAL;
1585 }
1586
1587 switch (parity)
1588 {
1589 case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break;
1590 case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
1591 case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
1592 default: return -EINVAL;
1593 }
1594
1595 info->params.encoding = new_encoding;
1596 info->params.crc_type = new_crctype;
1597
1598 /* if network interface up, reprogram hardware */
1599 if (info->netcount)
1600 program_hw(info);
1601
1602 return 0;
1603 }
1604
1605 /**
1606 * called by generic HDLC layer to send frame
1607 *
1608 * skb socket buffer containing HDLC frame
1609 * dev pointer to network device structure
1610 *
1611 * returns 0 if success, otherwise error code
1612 */
1613 static int hdlcdev_xmit(struct sk_buff *skb, struct net_device *dev)
1614 {
1615 SLMP_INFO *info = dev_to_port(dev);
1616 unsigned long flags;
1617
1618 if (debug_level >= DEBUG_LEVEL_INFO)
1619 printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name);
1620
1621 /* stop sending until this frame completes */
1622 netif_stop_queue(dev);
1623
1624 /* copy data to device buffers */
1625 info->tx_count = skb->len;
1626 tx_load_dma_buffer(info, skb->data, skb->len);
1627
1628 /* update network statistics */
1629 dev->stats.tx_packets++;
1630 dev->stats.tx_bytes += skb->len;
1631
1632 /* done with socket buffer, so free it */
1633 dev_kfree_skb(skb);
1634
1635 /* save start time for transmit timeout detection */
1636 dev->trans_start = jiffies;
1637
1638 /* start hardware transmitter if necessary */
1639 spin_lock_irqsave(&info->lock,flags);
1640 if (!info->tx_active)
1641 tx_start(info);
1642 spin_unlock_irqrestore(&info->lock,flags);
1643
1644 return 0;
1645 }
1646
1647 /**
1648 * called by network layer when interface enabled
1649 * claim resources and initialize hardware
1650 *
1651 * dev pointer to network device structure
1652 *
1653 * returns 0 if success, otherwise error code
1654 */
1655 static int hdlcdev_open(struct net_device *dev)
1656 {
1657 SLMP_INFO *info = dev_to_port(dev);
1658 int rc;
1659 unsigned long flags;
1660
1661 if (debug_level >= DEBUG_LEVEL_INFO)
1662 printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name);
1663
1664 /* generic HDLC layer open processing */
1665 if ((rc = hdlc_open(dev)))
1666 return rc;
1667
1668 /* arbitrate between network and tty opens */
1669 spin_lock_irqsave(&info->netlock, flags);
1670 if (info->port.count != 0 || info->netcount != 0) {
1671 printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
1672 spin_unlock_irqrestore(&info->netlock, flags);
1673 return -EBUSY;
1674 }
1675 info->netcount=1;
1676 spin_unlock_irqrestore(&info->netlock, flags);
1677
1678 /* claim resources and init adapter */
1679 if ((rc = startup(info)) != 0) {
1680 spin_lock_irqsave(&info->netlock, flags);
1681 info->netcount=0;
1682 spin_unlock_irqrestore(&info->netlock, flags);
1683 return rc;
1684 }
1685
1686 /* assert DTR and RTS, apply hardware settings */
1687 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
1688 program_hw(info);
1689
1690 /* enable network layer transmit */
1691 dev->trans_start = jiffies;
1692 netif_start_queue(dev);
1693
1694 /* inform generic HDLC layer of current DCD status */
1695 spin_lock_irqsave(&info->lock, flags);
1696 get_signals(info);
1697 spin_unlock_irqrestore(&info->lock, flags);
1698 if (info->serial_signals & SerialSignal_DCD)
1699 netif_carrier_on(dev);
1700 else
1701 netif_carrier_off(dev);
1702 return 0;
1703 }
1704
1705 /**
1706 * called by network layer when interface is disabled
1707 * shutdown hardware and release resources
1708 *
1709 * dev pointer to network device structure
1710 *
1711 * returns 0 if success, otherwise error code
1712 */
1713 static int hdlcdev_close(struct net_device *dev)
1714 {
1715 SLMP_INFO *info = dev_to_port(dev);
1716 unsigned long flags;
1717
1718 if (debug_level >= DEBUG_LEVEL_INFO)
1719 printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name);
1720
1721 netif_stop_queue(dev);
1722
1723 /* shutdown adapter and release resources */
1724 shutdown(info);
1725
1726 hdlc_close(dev);
1727
1728 spin_lock_irqsave(&info->netlock, flags);
1729 info->netcount=0;
1730 spin_unlock_irqrestore(&info->netlock, flags);
1731
1732 return 0;
1733 }
1734
1735 /**
1736 * called by network layer to process IOCTL call to network device
1737 *
1738 * dev pointer to network device structure
1739 * ifr pointer to network interface request structure
1740 * cmd IOCTL command code
1741 *
1742 * returns 0 if success, otherwise error code
1743 */
1744 static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1745 {
1746 const size_t size = sizeof(sync_serial_settings);
1747 sync_serial_settings new_line;
1748 sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
1749 SLMP_INFO *info = dev_to_port(dev);
1750 unsigned int flags;
1751
1752 if (debug_level >= DEBUG_LEVEL_INFO)
1753 printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name);
1754
1755 /* return error if TTY interface open */
1756 if (info->port.count)
1757 return -EBUSY;
1758
1759 if (cmd != SIOCWANDEV)
1760 return hdlc_ioctl(dev, ifr, cmd);
1761
1762 switch(ifr->ifr_settings.type) {
1763 case IF_GET_IFACE: /* return current sync_serial_settings */
1764
1765 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
1766 if (ifr->ifr_settings.size < size) {
1767 ifr->ifr_settings.size = size; /* data size wanted */
1768 return -ENOBUFS;
1769 }
1770
1771 flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1772 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1773 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1774 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
1775
1776 switch (flags){
1777 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
1778 case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break;
1779 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break;
1780 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
1781 default: new_line.clock_type = CLOCK_DEFAULT;
1782 }
1783
1784 new_line.clock_rate = info->params.clock_speed;
1785 new_line.loopback = info->params.loopback ? 1:0;
1786
1787 if (copy_to_user(line, &new_line, size))
1788 return -EFAULT;
1789 return 0;
1790
1791 case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
1792
1793 if(!capable(CAP_NET_ADMIN))
1794 return -EPERM;
1795 if (copy_from_user(&new_line, line, size))
1796 return -EFAULT;
1797
1798 switch (new_line.clock_type)
1799 {
1800 case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
1801 case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
1802 case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break;
1803 case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break;
1804 case CLOCK_DEFAULT: flags = info->params.flags &
1805 (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1806 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1807 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1808 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break;
1809 default: return -EINVAL;
1810 }
1811
1812 if (new_line.loopback != 0 && new_line.loopback != 1)
1813 return -EINVAL;
1814
1815 info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1816 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1817 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1818 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
1819 info->params.flags |= flags;
1820
1821 info->params.loopback = new_line.loopback;
1822
1823 if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
1824 info->params.clock_speed = new_line.clock_rate;
1825 else
1826 info->params.clock_speed = 0;
1827
1828 /* if network interface up, reprogram hardware */
1829 if (info->netcount)
1830 program_hw(info);
1831 return 0;
1832
1833 default:
1834 return hdlc_ioctl(dev, ifr, cmd);
1835 }
1836 }
1837
1838 /**
1839 * called by network layer when transmit timeout is detected
1840 *
1841 * dev pointer to network device structure
1842 */
1843 static void hdlcdev_tx_timeout(struct net_device *dev)
1844 {
1845 SLMP_INFO *info = dev_to_port(dev);
1846 unsigned long flags;
1847
1848 if (debug_level >= DEBUG_LEVEL_INFO)
1849 printk("hdlcdev_tx_timeout(%s)\n",dev->name);
1850
1851 dev->stats.tx_errors++;
1852 dev->stats.tx_aborted_errors++;
1853
1854 spin_lock_irqsave(&info->lock,flags);
1855 tx_stop(info);
1856 spin_unlock_irqrestore(&info->lock,flags);
1857
1858 netif_wake_queue(dev);
1859 }
1860
1861 /**
1862 * called by device driver when transmit completes
1863 * reenable network layer transmit if stopped
1864 *
1865 * info pointer to device instance information
1866 */
1867 static void hdlcdev_tx_done(SLMP_INFO *info)
1868 {
1869 if (netif_queue_stopped(info->netdev))
1870 netif_wake_queue(info->netdev);
1871 }
1872
1873 /**
1874 * called by device driver when frame received
1875 * pass frame to network layer
1876 *
1877 * info pointer to device instance information
1878 * buf pointer to buffer contianing frame data
1879 * size count of data bytes in buf
1880 */
1881 static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size)
1882 {
1883 struct sk_buff *skb = dev_alloc_skb(size);
1884 struct net_device *dev = info->netdev;
1885
1886 if (debug_level >= DEBUG_LEVEL_INFO)
1887 printk("hdlcdev_rx(%s)\n",dev->name);
1888
1889 if (skb == NULL) {
1890 printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n",
1891 dev->name);
1892 dev->stats.rx_dropped++;
1893 return;
1894 }
1895
1896 memcpy(skb_put(skb, size), buf, size);
1897
1898 skb->protocol = hdlc_type_trans(skb, dev);
1899
1900 dev->stats.rx_packets++;
1901 dev->stats.rx_bytes += size;
1902
1903 netif_rx(skb);
1904 }
1905
1906 static const struct net_device_ops hdlcdev_ops = {
1907 .ndo_open = hdlcdev_open,
1908 .ndo_stop = hdlcdev_close,
1909 .ndo_change_mtu = hdlc_change_mtu,
1910 .ndo_start_xmit = hdlc_start_xmit,
1911 .ndo_do_ioctl = hdlcdev_ioctl,
1912 .ndo_tx_timeout = hdlcdev_tx_timeout,
1913 };
1914
1915 /**
1916 * called by device driver when adding device instance
1917 * do generic HDLC initialization
1918 *
1919 * info pointer to device instance information
1920 *
1921 * returns 0 if success, otherwise error code
1922 */
1923 static int hdlcdev_init(SLMP_INFO *info)
1924 {
1925 int rc;
1926 struct net_device *dev;
1927 hdlc_device *hdlc;
1928
1929 /* allocate and initialize network and HDLC layer objects */
1930
1931 if (!(dev = alloc_hdlcdev(info))) {
1932 printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__);
1933 return -ENOMEM;
1934 }
1935
1936 /* for network layer reporting purposes only */
1937 dev->mem_start = info->phys_sca_base;
1938 dev->mem_end = info->phys_sca_base + SCA_BASE_SIZE - 1;
1939 dev->irq = info->irq_level;
1940
1941 /* network layer callbacks and settings */
1942 dev->netdev_ops = &hdlcdev_ops;
1943 dev->watchdog_timeo = 10 * HZ;
1944 dev->tx_queue_len = 50;
1945
1946 /* generic HDLC layer callbacks and settings */
1947 hdlc = dev_to_hdlc(dev);
1948 hdlc->attach = hdlcdev_attach;
1949 hdlc->xmit = hdlcdev_xmit;
1950
1951 /* register objects with HDLC layer */
1952 if ((rc = register_hdlc_device(dev))) {
1953 printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
1954 free_netdev(dev);
1955 return rc;
1956 }
1957
1958 info->netdev = dev;
1959 return 0;
1960 }
1961
1962 /**
1963 * called by device driver when removing device instance
1964 * do generic HDLC cleanup
1965 *
1966 * info pointer to device instance information
1967 */
1968 static void hdlcdev_exit(SLMP_INFO *info)
1969 {
1970 unregister_hdlc_device(info->netdev);
1971 free_netdev(info->netdev);
1972 info->netdev = NULL;
1973 }
1974
1975 #endif /* CONFIG_HDLC */
1976
1977
1978 /* Return next bottom half action to perform.
1979 * Return Value: BH action code or 0 if nothing to do.
1980 */
1981 static int bh_action(SLMP_INFO *info)
1982 {
1983 unsigned long flags;
1984 int rc = 0;
1985
1986 spin_lock_irqsave(&info->lock,flags);
1987
1988 if (info->pending_bh & BH_RECEIVE) {
1989 info->pending_bh &= ~BH_RECEIVE;
1990 rc = BH_RECEIVE;
1991 } else if (info->pending_bh & BH_TRANSMIT) {
1992 info->pending_bh &= ~BH_TRANSMIT;
1993 rc = BH_TRANSMIT;
1994 } else if (info->pending_bh & BH_STATUS) {
1995 info->pending_bh &= ~BH_STATUS;
1996 rc = BH_STATUS;
1997 }
1998
1999 if (!rc) {
2000 /* Mark BH routine as complete */
2001 info->bh_running = false;
2002 info->bh_requested = false;
2003 }
2004
2005 spin_unlock_irqrestore(&info->lock,flags);
2006
2007 return rc;
2008 }
2009
2010 /* Perform bottom half processing of work items queued by ISR.
2011 */
2012 static void bh_handler(struct work_struct *work)
2013 {
2014 SLMP_INFO *info = container_of(work, SLMP_INFO, task);
2015 int action;
2016
2017 if (!info)
2018 return;
2019
2020 if ( debug_level >= DEBUG_LEVEL_BH )
2021 printk( "%s(%d):%s bh_handler() entry\n",
2022 __FILE__,__LINE__,info->device_name);
2023
2024 info->bh_running = true;
2025
2026 while((action = bh_action(info)) != 0) {
2027
2028 /* Process work item */
2029 if ( debug_level >= DEBUG_LEVEL_BH )
2030 printk( "%s(%d):%s bh_handler() work item action=%d\n",
2031 __FILE__,__LINE__,info->device_name, action);
2032
2033 switch (action) {
2034
2035 case BH_RECEIVE:
2036 bh_receive(info);
2037 break;
2038 case BH_TRANSMIT:
2039 bh_transmit(info);
2040 break;
2041 case BH_STATUS:
2042 bh_status(info);
2043 break;
2044 default:
2045 /* unknown work item ID */
2046 printk("%s(%d):%s Unknown work item ID=%08X!\n",
2047 __FILE__,__LINE__,info->device_name,action);
2048 break;
2049 }
2050 }
2051
2052 if ( debug_level >= DEBUG_LEVEL_BH )
2053 printk( "%s(%d):%s bh_handler() exit\n",
2054 __FILE__,__LINE__,info->device_name);
2055 }
2056
2057 static void bh_receive(SLMP_INFO *info)
2058 {
2059 if ( debug_level >= DEBUG_LEVEL_BH )
2060 printk( "%s(%d):%s bh_receive()\n",
2061 __FILE__,__LINE__,info->device_name);
2062
2063 while( rx_get_frame(info) );
2064 }
2065
2066 static void bh_transmit(SLMP_INFO *info)
2067 {
2068 struct tty_struct *tty = info->port.tty;
2069
2070 if ( debug_level >= DEBUG_LEVEL_BH )
2071 printk( "%s(%d):%s bh_transmit() entry\n",
2072 __FILE__,__LINE__,info->device_name);
2073
2074 if (tty)
2075 tty_wakeup(tty);
2076 }
2077
2078 static void bh_status(SLMP_INFO *info)
2079 {
2080 if ( debug_level >= DEBUG_LEVEL_BH )
2081 printk( "%s(%d):%s bh_status() entry\n",
2082 __FILE__,__LINE__,info->device_name);
2083
2084 info->ri_chkcount = 0;
2085 info->dsr_chkcount = 0;
2086 info->dcd_chkcount = 0;
2087 info->cts_chkcount = 0;
2088 }
2089
2090 static void isr_timer(SLMP_INFO * info)
2091 {
2092 unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0;
2093
2094 /* IER2<7..4> = timer<3..0> interrupt enables (0=disabled) */
2095 write_reg(info, IER2, 0);
2096
2097 /* TMCS, Timer Control/Status Register
2098 *
2099 * 07 CMF, Compare match flag (read only) 1=match
2100 * 06 ECMI, CMF Interrupt Enable: 0=disabled
2101 * 05 Reserved, must be 0
2102 * 04 TME, Timer Enable
2103 * 03..00 Reserved, must be 0
2104 *
2105 * 0000 0000
2106 */
2107 write_reg(info, (unsigned char)(timer + TMCS), 0);
2108
2109 info->irq_occurred = true;
2110
2111 if ( debug_level >= DEBUG_LEVEL_ISR )
2112 printk("%s(%d):%s isr_timer()\n",
2113 __FILE__,__LINE__,info->device_name);
2114 }
2115
2116 static void isr_rxint(SLMP_INFO * info)
2117 {
2118 struct tty_struct *tty = info->port.tty;
2119 struct mgsl_icount *icount = &info->icount;
2120 unsigned char status = read_reg(info, SR1) & info->ie1_value & (FLGD + IDLD + CDCD + BRKD);
2121 unsigned char status2 = read_reg(info, SR2) & info->ie2_value & OVRN;
2122
2123 /* clear status bits */
2124 if (status)
2125 write_reg(info, SR1, status);
2126
2127 if (status2)
2128 write_reg(info, SR2, status2);
2129
2130 if ( debug_level >= DEBUG_LEVEL_ISR )
2131 printk("%s(%d):%s isr_rxint status=%02X %02x\n",
2132 __FILE__,__LINE__,info->device_name,status,status2);
2133
2134 if (info->params.mode == MGSL_MODE_ASYNC) {
2135 if (status & BRKD) {
2136 icount->brk++;
2137
2138 /* process break detection if tty control
2139 * is not set to ignore it
2140 */
2141 if ( tty ) {
2142 if (!(status & info->ignore_status_mask1)) {
2143 if (info->read_status_mask1 & BRKD) {
2144 tty_insert_flip_char(tty, 0, TTY_BREAK);
2145 if (info->port.flags & ASYNC_SAK)
2146 do_SAK(tty);
2147 }
2148 }
2149 }
2150 }
2151 }
2152 else {
2153 if (status & (FLGD|IDLD)) {
2154 if (status & FLGD)
2155 info->icount.exithunt++;
2156 else if (status & IDLD)
2157 info->icount.rxidle++;
2158 wake_up_interruptible(&info->event_wait_q);
2159 }
2160 }
2161
2162 if (status & CDCD) {
2163 /* simulate a common modem status change interrupt
2164 * for our handler
2165 */
2166 get_signals( info );
2167 isr_io_pin(info,
2168 MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD));
2169 }
2170 }
2171
2172 /*
2173 * handle async rx data interrupts
2174 */
2175 static void isr_rxrdy(SLMP_INFO * info)
2176 {
2177 u16 status;
2178 unsigned char DataByte;
2179 struct tty_struct *tty = info->port.tty;
2180 struct mgsl_icount *icount = &info->icount;
2181
2182 if ( debug_level >= DEBUG_LEVEL_ISR )
2183 printk("%s(%d):%s isr_rxrdy\n",
2184 __FILE__,__LINE__,info->device_name);
2185
2186 while((status = read_reg(info,CST0)) & BIT0)
2187 {
2188 int flag = 0;
2189 bool over = false;
2190 DataByte = read_reg(info,TRB);
2191
2192 icount->rx++;
2193
2194 if ( status & (PE + FRME + OVRN) ) {
2195 printk("%s(%d):%s rxerr=%04X\n",
2196 __FILE__,__LINE__,info->device_name,status);
2197
2198 /* update error statistics */
2199 if (status & PE)
2200 icount->parity++;
2201 else if (status & FRME)
2202 icount->frame++;
2203 else if (status & OVRN)
2204 icount->overrun++;
2205
2206 /* discard char if tty control flags say so */
2207 if (status & info->ignore_status_mask2)
2208 continue;
2209
2210 status &= info->read_status_mask2;
2211
2212 if ( tty ) {
2213 if (status & PE)
2214 flag = TTY_PARITY;
2215 else if (status & FRME)
2216 flag = TTY_FRAME;
2217 if (status & OVRN) {
2218 /* Overrun is special, since it's
2219 * reported immediately, and doesn't
2220 * affect the current character
2221 */
2222 over = true;
2223 }
2224 }
2225 } /* end of if (error) */
2226
2227 if ( tty ) {
2228 tty_insert_flip_char(tty, DataByte, flag);
2229 if (over)
2230 tty_insert_flip_char(tty, 0, TTY_OVERRUN);
2231 }
2232 }
2233
2234 if ( debug_level >= DEBUG_LEVEL_ISR ) {
2235 printk("%s(%d):%s rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
2236 __FILE__,__LINE__,info->device_name,
2237 icount->rx,icount->brk,icount->parity,
2238 icount->frame,icount->overrun);
2239 }
2240
2241 if ( tty )
2242 tty_flip_buffer_push(tty);
2243 }
2244
2245 static void isr_txeom(SLMP_INFO * info, unsigned char status)
2246 {
2247 if ( debug_level >= DEBUG_LEVEL_ISR )
2248 printk("%s(%d):%s isr_txeom status=%02x\n",
2249 __FILE__,__LINE__,info->device_name,status);
2250
2251 write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */
2252 write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */
2253 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
2254
2255 if (status & UDRN) {
2256 write_reg(info, CMD, TXRESET);
2257 write_reg(info, CMD, TXENABLE);
2258 } else
2259 write_reg(info, CMD, TXBUFCLR);
2260
2261 /* disable and clear tx interrupts */
2262 info->ie0_value &= ~TXRDYE;
2263 info->ie1_value &= ~(IDLE + UDRN);
2264 write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value));
2265 write_reg(info, SR1, (unsigned char)(UDRN + IDLE));
2266
2267 if ( info->tx_active ) {
2268 if (info->params.mode != MGSL_MODE_ASYNC) {
2269 if (status & UDRN)
2270 info->icount.txunder++;
2271 else if (status & IDLE)
2272 info->icount.txok++;
2273 }
2274
2275 info->tx_active = false;
2276 info->tx_count = info->tx_put = info->tx_get = 0;
2277
2278 del_timer(&info->tx_timer);
2279
2280 if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done ) {
2281 info->serial_signals &= ~SerialSignal_RTS;
2282 info->drop_rts_on_tx_done = false;
2283 set_signals(info);
2284 }
2285
2286 #if SYNCLINK_GENERIC_HDLC
2287 if (info->netcount)
2288 hdlcdev_tx_done(info);
2289 else
2290 #endif
2291 {
2292 if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
2293 tx_stop(info);
2294 return;
2295 }
2296 info->pending_bh |= BH_TRANSMIT;
2297 }
2298 }
2299 }
2300
2301
2302 /*
2303 * handle tx status interrupts
2304 */
2305 static void isr_txint(SLMP_INFO * info)
2306 {
2307 unsigned char status = read_reg(info, SR1) & info->ie1_value & (UDRN + IDLE + CCTS);
2308
2309 /* clear status bits */
2310 write_reg(info, SR1, status);
2311
2312 if ( debug_level >= DEBUG_LEVEL_ISR )
2313 printk("%s(%d):%s isr_txint status=%02x\n",
2314 __FILE__,__LINE__,info->device_name,status);
2315
2316 if (status & (UDRN + IDLE))
2317 isr_txeom(info, status);
2318
2319 if (status & CCTS) {
2320 /* simulate a common modem status change interrupt
2321 * for our handler
2322 */
2323 get_signals( info );
2324 isr_io_pin(info,
2325 MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS));
2326
2327 }
2328 }
2329
2330 /*
2331 * handle async tx data interrupts
2332 */
2333 static void isr_txrdy(SLMP_INFO * info)
2334 {
2335 if ( debug_level >= DEBUG_LEVEL_ISR )
2336 printk("%s(%d):%s isr_txrdy() tx_count=%d\n",
2337 __FILE__,__LINE__,info->device_name,info->tx_count);
2338
2339 if (info->params.mode != MGSL_MODE_ASYNC) {
2340 /* disable TXRDY IRQ, enable IDLE IRQ */
2341 info->ie0_value &= ~TXRDYE;
2342 info->ie1_value |= IDLE;
2343 write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value));
2344 return;
2345 }
2346
2347 if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
2348 tx_stop(info);
2349 return;
2350 }
2351
2352 if ( info->tx_count )
2353 tx_load_fifo( info );
2354 else {
2355 info->tx_active = false;
2356 info->ie0_value &= ~TXRDYE;
2357 write_reg(info, IE0, info->ie0_value);
2358 }
2359
2360 if (info->tx_count < WAKEUP_CHARS)
2361 info->pending_bh |= BH_TRANSMIT;
2362 }
2363
2364 static void isr_rxdmaok(SLMP_INFO * info)
2365 {
2366 /* BIT7 = EOT (end of transfer)
2367 * BIT6 = EOM (end of message/frame)
2368 */
2369 unsigned char status = read_reg(info,RXDMA + DSR) & 0xc0;
2370
2371 /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
2372 write_reg(info, RXDMA + DSR, (unsigned char)(status | 1));
2373
2374 if ( debug_level >= DEBUG_LEVEL_ISR )
2375 printk("%s(%d):%s isr_rxdmaok(), status=%02x\n",
2376 __FILE__,__LINE__,info->device_name,status);
2377
2378 info->pending_bh |= BH_RECEIVE;
2379 }
2380
2381 static void isr_rxdmaerror(SLMP_INFO * info)
2382 {
2383 /* BIT5 = BOF (buffer overflow)
2384 * BIT4 = COF (counter overflow)
2385 */
2386 unsigned char status = read_reg(info,RXDMA + DSR) & 0x30;
2387
2388 /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
2389 write_reg(info, RXDMA + DSR, (unsigned char)(status | 1));
2390
2391 if ( debug_level >= DEBUG_LEVEL_ISR )
2392 printk("%s(%d):%s isr_rxdmaerror(), status=%02x\n",
2393 __FILE__,__LINE__,info->device_name,status);
2394
2395 info->rx_overflow = true;
2396 info->pending_bh |= BH_RECEIVE;
2397 }
2398
2399 static void isr_txdmaok(SLMP_INFO * info)
2400 {
2401 unsigned char status_reg1 = read_reg(info, SR1);
2402
2403 write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */
2404 write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */
2405 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
2406
2407 if ( debug_level >= DEBUG_LEVEL_ISR )
2408 printk("%s(%d):%s isr_txdmaok(), status=%02x\n",
2409 __FILE__,__LINE__,info->device_name,status_reg1);
2410
2411 /* program TXRDY as FIFO empty flag, enable TXRDY IRQ */
2412 write_reg16(info, TRC0, 0);
2413 info->ie0_value |= TXRDYE;
2414 write_reg(info, IE0, info->ie0_value);
2415 }
2416
2417 static void isr_txdmaerror(SLMP_INFO * info)
2418 {
2419 /* BIT5 = BOF (buffer overflow)
2420 * BIT4 = COF (counter overflow)
2421 */
2422 unsigned char status = read_reg(info,TXDMA + DSR) & 0x30;
2423
2424 /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
2425 write_reg(info, TXDMA + DSR, (unsigned char)(status | 1));
2426
2427 if ( debug_level >= DEBUG_LEVEL_ISR )
2428 printk("%s(%d):%s isr_txdmaerror(), status=%02x\n",
2429 __FILE__,__LINE__,info->device_name,status);
2430 }
2431
2432 /* handle input serial signal changes
2433 */
2434 static void isr_io_pin( SLMP_INFO *info, u16 status )
2435 {
2436 struct mgsl_icount *icount;
2437
2438 if ( debug_level >= DEBUG_LEVEL_ISR )
2439 printk("%s(%d):isr_io_pin status=%04X\n",
2440 __FILE__,__LINE__,status);
2441
2442 if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED |
2443 MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) {
2444 icount = &info->icount;
2445 /* update input line counters */
2446 if (status & MISCSTATUS_RI_LATCHED) {
2447 icount->rng++;
2448 if ( status & SerialSignal_RI )
2449 info->input_signal_events.ri_up++;
2450 else
2451 info->input_signal_events.ri_down++;
2452 }
2453 if (status & MISCSTATUS_DSR_LATCHED) {
2454 icount->dsr++;
2455 if ( status & SerialSignal_DSR )
2456 info->input_signal_events.dsr_up++;
2457 else
2458 info->input_signal_events.dsr_down++;
2459 }
2460 if (status & MISCSTATUS_DCD_LATCHED) {
2461 if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) {
2462 info->ie1_value &= ~CDCD;
2463 write_reg(info, IE1, info->ie1_value);
2464 }
2465 icount->dcd++;
2466 if (status & SerialSignal_DCD) {
2467 info->input_signal_events.dcd_up++;
2468 } else
2469 info->input_signal_events.dcd_down++;
2470 #if SYNCLINK_GENERIC_HDLC
2471 if (info->netcount) {
2472 if (status & SerialSignal_DCD)
2473 netif_carrier_on(info->netdev);
2474 else
2475 netif_carrier_off(info->netdev);
2476 }
2477 #endif
2478 }
2479 if (status & MISCSTATUS_CTS_LATCHED)
2480 {
2481 if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) {
2482 info->ie1_value &= ~CCTS;
2483 write_reg(info, IE1, info->ie1_value);
2484 }
2485 icount->cts++;
2486 if ( status & SerialSignal_CTS )
2487 info->input_signal_events.cts_up++;
2488 else
2489 info->input_signal_events.cts_down++;
2490 }
2491 wake_up_interruptible(&info->status_event_wait_q);
2492 wake_up_interruptible(&info->event_wait_q);
2493
2494 if ( (info->port.flags & ASYNC_CHECK_CD) &&
2495 (status & MISCSTATUS_DCD_LATCHED) ) {
2496 if ( debug_level >= DEBUG_LEVEL_ISR )
2497 printk("%s CD now %s...", info->device_name,
2498 (status & SerialSignal_DCD) ? "on" : "off");
2499 if (status & SerialSignal_DCD)
2500 wake_up_interruptible(&info->port.open_wait);
2501 else {
2502 if ( debug_level >= DEBUG_LEVEL_ISR )
2503 printk("doing serial hangup...");
2504 if (info->port.tty)
2505 tty_hangup(info->port.tty);
2506 }
2507 }
2508
2509 if ( (info->port.flags & ASYNC_CTS_FLOW) &&
2510 (status & MISCSTATUS_CTS_LATCHED) ) {
2511 if ( info->port.tty ) {
2512 if (info->port.tty->hw_stopped) {
2513 if (status & SerialSignal_CTS) {
2514 if ( debug_level >= DEBUG_LEVEL_ISR )
2515 printk("CTS tx start...");
2516 info->port.tty->hw_stopped = 0;
2517 tx_start(info);
2518 info->pending_bh |= BH_TRANSMIT;
2519 return;
2520 }
2521 } else {
2522 if (!(status & SerialSignal_CTS)) {
2523 if ( debug_level >= DEBUG_LEVEL_ISR )
2524 printk("CTS tx stop...");
2525 info->port.tty->hw_stopped = 1;
2526 tx_stop(info);
2527 }
2528 }
2529 }
2530 }
2531 }
2532
2533 info->pending_bh |= BH_STATUS;
2534 }
2535
2536 /* Interrupt service routine entry point.
2537 *
2538 * Arguments:
2539 * irq interrupt number that caused interrupt
2540 * dev_id device ID supplied during interrupt registration
2541 * regs interrupted processor context
2542 */
2543 static irqreturn_t synclinkmp_interrupt(int dummy, void *dev_id)
2544 {
2545 SLMP_INFO *info = dev_id;
2546 unsigned char status, status0, status1=0;
2547 unsigned char dmastatus, dmastatus0, dmastatus1=0;
2548 unsigned char timerstatus0, timerstatus1=0;
2549 unsigned char shift;
2550 unsigned int i;
2551 unsigned short tmp;
2552
2553 if ( debug_level >= DEBUG_LEVEL_ISR )
2554 printk(KERN_DEBUG "%s(%d): synclinkmp_interrupt(%d)entry.\n",
2555 __FILE__, __LINE__, info->irq_level);
2556
2557 spin_lock(&info->lock);
2558
2559 for(;;) {
2560
2561 /* get status for SCA0 (ports 0-1) */
2562 tmp = read_reg16(info, ISR0); /* get ISR0 and ISR1 in one read */
2563 status0 = (unsigned char)tmp;
2564 dmastatus0 = (unsigned char)(tmp>>8);
2565 timerstatus0 = read_reg(info, ISR2);
2566
2567 if ( debug_level >= DEBUG_LEVEL_ISR )
2568 printk(KERN_DEBUG "%s(%d):%s status0=%02x, dmastatus0=%02x, timerstatus0=%02x\n",
2569 __FILE__, __LINE__, info->device_name,
2570 status0, dmastatus0, timerstatus0);
2571
2572 if (info->port_count == 4) {
2573 /* get status for SCA1 (ports 2-3) */
2574 tmp = read_reg16(info->port_array[2], ISR0);
2575 status1 = (unsigned char)tmp;
2576 dmastatus1 = (unsigned char)(tmp>>8);
2577 timerstatus1 = read_reg(info->port_array[2], ISR2);
2578
2579 if ( debug_level >= DEBUG_LEVEL_ISR )
2580 printk("%s(%d):%s status1=%02x, dmastatus1=%02x, timerstatus1=%02x\n",
2581 __FILE__,__LINE__,info->device_name,
2582 status1,dmastatus1,timerstatus1);
2583 }
2584
2585 if (!status0 && !dmastatus0 && !timerstatus0 &&
2586 !status1 && !dmastatus1 && !timerstatus1)
2587 break;
2588
2589 for(i=0; i < info->port_count ; i++) {
2590 if (info->port_array[i] == NULL)
2591 continue;
2592 if (i < 2) {
2593 status = status0;
2594 dmastatus = dmastatus0;
2595 } else {
2596 status = status1;
2597 dmastatus = dmastatus1;
2598 }
2599
2600 shift = i & 1 ? 4 :0;
2601
2602 if (status & BIT0 << shift)
2603 isr_rxrdy(info->port_array[i]);
2604 if (status & BIT1 << shift)
2605 isr_txrdy(info->port_array[i]);
2606 if (status & BIT2 << shift)
2607 isr_rxint(info->port_array[i]);
2608 if (status & BIT3 << shift)
2609 isr_txint(info->port_array[i]);
2610
2611 if (dmastatus & BIT0 << shift)
2612 isr_rxdmaerror(info->port_array[i]);
2613 if (dmastatus & BIT1 << shift)
2614 isr_rxdmaok(info->port_array[i]);
2615 if (dmastatus & BIT2 << shift)
2616 isr_txdmaerror(info->port_array[i]);
2617 if (dmastatus & BIT3 << shift)
2618 isr_txdmaok(info->port_array[i]);
2619 }
2620
2621 if (timerstatus0 & (BIT5 | BIT4))
2622 isr_timer(info->port_array[0]);
2623 if (timerstatus0 & (BIT7 | BIT6))
2624 isr_timer(info->port_array[1]);
2625 if (timerstatus1 & (BIT5 | BIT4))
2626 isr_timer(info->port_array[2]);
2627 if (timerstatus1 & (BIT7 | BIT6))
2628 isr_timer(info->port_array[3]);
2629 }
2630
2631 for(i=0; i < info->port_count ; i++) {
2632 SLMP_INFO * port = info->port_array[i];
2633
2634 /* Request bottom half processing if there's something
2635 * for it to do and the bh is not already running.
2636 *
2637 * Note: startup adapter diags require interrupts.
2638 * do not request bottom half processing if the
2639 * device is not open in a normal mode.
2640 */
2641 if ( port && (port->port.count || port->netcount) &&
2642 port->pending_bh && !port->bh_running &&
2643 !port->bh_requested ) {
2644 if ( debug_level >= DEBUG_LEVEL_ISR )
2645 printk("%s(%d):%s queueing bh task.\n",
2646 __FILE__,__LINE__,port->device_name);
2647 schedule_work(&port->task);
2648 port->bh_requested = true;
2649 }
2650 }
2651
2652 spin_unlock(&info->lock);
2653
2654 if ( debug_level >= DEBUG_LEVEL_ISR )
2655 printk(KERN_DEBUG "%s(%d):synclinkmp_interrupt(%d)exit.\n",
2656 __FILE__, __LINE__, info->irq_level);
2657 return IRQ_HANDLED;
2658 }
2659
2660 /* Initialize and start device.
2661 */
2662 static int startup(SLMP_INFO * info)
2663 {
2664 if ( debug_level >= DEBUG_LEVEL_INFO )
2665 printk("%s(%d):%s tx_releaseup()\n",__FILE__,__LINE__,info->device_name);
2666
2667 if (info->port.flags & ASYNC_INITIALIZED)
2668 return 0;
2669
2670 if (!info->tx_buf) {
2671 info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
2672 if (!info->tx_buf) {
2673 printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
2674 __FILE__,__LINE__,info->device_name);
2675 return -ENOMEM;
2676 }
2677 }
2678
2679 info->pending_bh = 0;
2680
2681 memset(&info->icount, 0, sizeof(info->icount));
2682
2683 /* program hardware for current parameters */
2684 reset_port(info);
2685
2686 change_params(info);
2687
2688 mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10));
2689
2690 if (info->port.tty)
2691 clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
2692
2693 info->port.flags |= ASYNC_INITIALIZED;
2694
2695 return 0;
2696 }
2697
2698 /* Called by close() and hangup() to shutdown hardware
2699 */
2700 static void shutdown(SLMP_INFO * info)
2701 {
2702 unsigned long flags;
2703
2704 if (!(info->port.flags & ASYNC_INITIALIZED))
2705 return;
2706
2707 if (debug_level >= DEBUG_LEVEL_INFO)
2708 printk("%s(%d):%s synclinkmp_shutdown()\n",
2709 __FILE__,__LINE__, info->device_name );
2710
2711 /* clear status wait queue because status changes */
2712 /* can't happen after shutting down the hardware */
2713 wake_up_interruptible(&info->status_event_wait_q);
2714 wake_up_interruptible(&info->event_wait_q);
2715
2716 del_timer(&info->tx_timer);
2717 del_timer(&info->status_timer);
2718
2719 kfree(info->tx_buf);
2720 info->tx_buf = NULL;
2721
2722 spin_lock_irqsave(&info->lock,flags);
2723
2724 reset_port(info);
2725
2726 if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
2727 info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
2728 set_signals(info);
2729 }
2730
2731 spin_unlock_irqrestore(&info->lock,flags);
2732
2733 if (info->port.tty)
2734 set_bit(TTY_IO_ERROR, &info->port.tty->flags);
2735
2736 info->port.flags &= ~ASYNC_INITIALIZED;
2737 }
2738
2739 static void program_hw(SLMP_INFO *info)
2740 {
2741 unsigned long flags;
2742
2743 spin_lock_irqsave(&info->lock,flags);
2744
2745 rx_stop(info);
2746 tx_stop(info);
2747
2748 info->tx_count = info->tx_put = info->tx_get = 0;
2749
2750 if (info->params.mode == MGSL_MODE_HDLC || info->netcount)
2751 hdlc_mode(info);
2752 else
2753 async_mode(info);
2754
2755 set_signals(info);
2756
2757 info->dcd_chkcount = 0;
2758 info->cts_chkcount = 0;
2759 info->ri_chkcount = 0;
2760 info->dsr_chkcount = 0;
2761
2762 info->ie1_value |= (CDCD|CCTS);
2763 write_reg(info, IE1, info->ie1_value);
2764
2765 get_signals(info);
2766
2767 if (info->netcount || (info->port.tty && info->port.tty->termios->c_cflag & CREAD) )
2768 rx_start(info);
2769
2770 spin_unlock_irqrestore(&info->lock,flags);
2771 }
2772
2773 /* Reconfigure adapter based on new parameters
2774 */
2775 static void change_params(SLMP_INFO *info)
2776 {
2777 unsigned cflag;
2778 int bits_per_char;
2779
2780 if (!info->port.tty || !info->port.tty->termios)
2781 return;
2782
2783 if (debug_level >= DEBUG_LEVEL_INFO)
2784 printk("%s(%d):%s change_params()\n",
2785 __FILE__,__LINE__, info->device_name );
2786
2787 cflag = info->port.tty->termios->c_cflag;
2788
2789 /* if B0 rate (hangup) specified then negate DTR and RTS */
2790 /* otherwise assert DTR and RTS */
2791 if (cflag & CBAUD)
2792 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
2793 else
2794 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
2795
2796 /* byte size and parity */
2797
2798 switch (cflag & CSIZE) {
2799 case CS5: info->params.data_bits = 5; break;
2800 case CS6: info->params.data_bits = 6; break;
2801 case CS7: info->params.data_bits = 7; break;
2802 case CS8: info->params.data_bits = 8; break;
2803 /* Never happens, but GCC is too dumb to figure it out */
2804 default: info->params.data_bits = 7; break;
2805 }
2806
2807 if (cflag & CSTOPB)
2808 info->params.stop_bits = 2;
2809 else
2810 info->params.stop_bits = 1;
2811
2812 info->params.parity = ASYNC_PARITY_NONE;
2813 if (cflag & PARENB) {
2814 if (cflag & PARODD)
2815 info->params.parity = ASYNC_PARITY_ODD;
2816 else
2817 info->params.parity = ASYNC_PARITY_EVEN;
2818 #ifdef CMSPAR
2819 if (cflag & CMSPAR)
2820 info->params.parity = ASYNC_PARITY_SPACE;
2821 #endif
2822 }
2823
2824 /* calculate number of jiffies to transmit a full
2825 * FIFO (32 bytes) at specified data rate
2826 */
2827 bits_per_char = info->params.data_bits +
2828 info->params.stop_bits + 1;
2829
2830 /* if port data rate is set to 460800 or less then
2831 * allow tty settings to override, otherwise keep the
2832 * current data rate.
2833 */
2834 if (info->params.data_rate <= 460800) {
2835 info->params.data_rate = tty_get_baud_rate(info->port.tty);
2836 }
2837
2838 if ( info->params.data_rate ) {
2839 info->timeout = (32*HZ*bits_per_char) /
2840 info->params.data_rate;
2841 }
2842 info->timeout += HZ/50; /* Add .02 seconds of slop */
2843
2844 if (cflag & CRTSCTS)
2845 info->port.flags |= ASYNC_CTS_FLOW;
2846 else
2847 info->port.flags &= ~ASYNC_CTS_FLOW;
2848
2849 if (cflag & CLOCAL)
2850 info->port.flags &= ~ASYNC_CHECK_CD;
2851 else
2852 info->port.flags |= ASYNC_CHECK_CD;
2853
2854 /* process tty input control flags */
2855
2856 info->read_status_mask2 = OVRN;
2857 if (I_INPCK(info->port.tty))
2858 info->read_status_mask2 |= PE | FRME;
2859 if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
2860 info->read_status_mask1 |= BRKD;
2861 if (I_IGNPAR(info->port.tty))
2862 info->ignore_status_mask2 |= PE | FRME;
2863 if (I_IGNBRK(info->port.tty)) {
2864 info->ignore_status_mask1 |= BRKD;
2865 /* If ignoring parity and break indicators, ignore
2866 * overruns too. (For real raw support).
2867 */
2868 if (I_IGNPAR(info->port.tty))
2869 info->ignore_status_mask2 |= OVRN;
2870 }
2871
2872 program_hw(info);
2873 }
2874
2875 static int get_stats(SLMP_INFO * info, struct mgsl_icount __user *user_icount)
2876 {
2877 int err;
2878
2879 if (debug_level >= DEBUG_LEVEL_INFO)
2880 printk("%s(%d):%s get_params()\n",
2881 __FILE__,__LINE__, info->device_name);
2882
2883 if (!user_icount) {
2884 memset(&info->icount, 0, sizeof(info->icount));
2885 } else {
2886 COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
2887 if (err)
2888 return -EFAULT;
2889 }
2890
2891 return 0;
2892 }
2893
2894 static int get_params(SLMP_INFO * info, MGSL_PARAMS __user *user_params)
2895 {
2896 int err;
2897 if (debug_level >= DEBUG_LEVEL_INFO)
2898 printk("%s(%d):%s get_params()\n",
2899 __FILE__,__LINE__, info->device_name);
2900
2901 COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
2902 if (err) {
2903 if ( debug_level >= DEBUG_LEVEL_INFO )
2904 printk( "%s(%d):%s get_params() user buffer copy failed\n",
2905 __FILE__,__LINE__,info->device_name);
2906 return -EFAULT;
2907 }
2908
2909 return 0;
2910 }
2911
2912 static int set_params(SLMP_INFO * info, MGSL_PARAMS __user *new_params)
2913 {
2914 unsigned long flags;
2915 MGSL_PARAMS tmp_params;
2916 int err;
2917
2918 if (debug_level >= DEBUG_LEVEL_INFO)
2919 printk("%s(%d):%s set_params\n",
2920 __FILE__,__LINE__,info->device_name );
2921 COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS));
2922 if (err) {
2923 if ( debug_level >= DEBUG_LEVEL_INFO )
2924 printk( "%s(%d):%s set_params() user buffer copy failed\n",
2925 __FILE__,__LINE__,info->device_name);
2926 return -EFAULT;
2927 }
2928
2929 spin_lock_irqsave(&info->lock,flags);
2930 memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
2931 spin_unlock_irqrestore(&info->lock,flags);
2932
2933 change_params(info);
2934
2935 return 0;
2936 }
2937
2938 static int get_txidle(SLMP_INFO * info, int __user *idle_mode)
2939 {
2940 int err;
2941
2942 if (debug_level >= DEBUG_LEVEL_INFO)
2943 printk("%s(%d):%s get_txidle()=%d\n",
2944 __FILE__,__LINE__, info->device_name, info->idle_mode);
2945
2946 COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
2947 if (err) {
2948 if ( debug_level >= DEBUG_LEVEL_INFO )
2949 printk( "%s(%d):%s get_txidle() user buffer copy failed\n",
2950 __FILE__,__LINE__,info->device_name);
2951 return -EFAULT;
2952 }
2953
2954 return 0;
2955 }
2956
2957 static int set_txidle(SLMP_INFO * info, int idle_mode)
2958 {
2959 unsigned long flags;
2960
2961 if (debug_level >= DEBUG_LEVEL_INFO)
2962 printk("%s(%d):%s set_txidle(%d)\n",
2963 __FILE__,__LINE__,info->device_name, idle_mode );
2964
2965 spin_lock_irqsave(&info->lock,flags);
2966 info->idle_mode = idle_mode;
2967 tx_set_idle( info );
2968 spin_unlock_irqrestore(&info->lock,flags);
2969 return 0;
2970 }
2971
2972 static int tx_enable(SLMP_INFO * info, int enable)
2973 {
2974 unsigned long flags;
2975
2976 if (debug_level >= DEBUG_LEVEL_INFO)
2977 printk("%s(%d):%s tx_enable(%d)\n",
2978 __FILE__,__LINE__,info->device_name, enable);
2979
2980 spin_lock_irqsave(&info->lock,flags);
2981 if ( enable ) {
2982 if ( !info->tx_enabled ) {
2983 tx_start(info);
2984 }
2985 } else {
2986 if ( info->tx_enabled )
2987 tx_stop(info);
2988 }
2989 spin_unlock_irqrestore(&info->lock,flags);
2990 return 0;
2991 }
2992
2993 /* abort send HDLC frame
2994 */
2995 static int tx_abort(SLMP_INFO * info)
2996 {
2997 unsigned long flags;
2998
2999 if (debug_level >= DEBUG_LEVEL_INFO)
3000 printk("%s(%d):%s tx_abort()\n",
3001 __FILE__,__LINE__,info->device_name);
3002
3003 spin_lock_irqsave(&info->lock,flags);
3004 if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC ) {
3005 info->ie1_value &= ~UDRN;
3006 info->ie1_value |= IDLE;
3007 write_reg(info, IE1, info->ie1_value); /* disable tx status interrupts */
3008 write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); /* clear pending */
3009
3010 write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */
3011 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
3012
3013 write_reg(info, CMD, TXABORT);
3014 }
3015 spin_unlock_irqrestore(&info->lock,flags);
3016 return 0;
3017 }
3018
3019 static int rx_enable(SLMP_INFO * info, int enable)
3020 {
3021 unsigned long flags;
3022
3023 if (debug_level >= DEBUG_LEVEL_INFO)
3024 printk("%s(%d):%s rx_enable(%d)\n",
3025 __FILE__,__LINE__,info->device_name,enable);
3026
3027 spin_lock_irqsave(&info->lock,flags);
3028 if ( enable ) {
3029 if ( !info->rx_enabled )
3030 rx_start(info);
3031 } else {
3032 if ( info->rx_enabled )
3033 rx_stop(info);
3034 }
3035 spin_unlock_irqrestore(&info->lock,flags);
3036 return 0;
3037 }
3038
3039 /* wait for specified event to occur
3040 */
3041 static int wait_mgsl_event(SLMP_INFO * info, int __user *mask_ptr)
3042 {
3043 unsigned long flags;
3044 int s;
3045 int rc=0;
3046 struct mgsl_icount cprev, cnow;
3047 int events;
3048 int mask;
3049 struct _input_signal_events oldsigs, newsigs;
3050 DECLARE_WAITQUEUE(wait, current);
3051
3052 COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int));
3053 if (rc) {
3054 return -EFAULT;
3055 }
3056
3057 if (debug_level >= DEBUG_LEVEL_INFO)
3058 printk("%s(%d):%s wait_mgsl_event(%d)\n",
3059 __FILE__,__LINE__,info->device_name,mask);
3060
3061 spin_lock_irqsave(&info->lock,flags);
3062
3063 /* return immediately if state matches requested events */
3064 get_signals(info);
3065 s = info->serial_signals;
3066
3067 events = mask &
3068 ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
3069 ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
3070 ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
3071 ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) );
3072 if (events) {
3073 spin_unlock_irqrestore(&info->lock,flags);
3074 goto exit;
3075 }
3076
3077 /* save current irq counts */
3078 cprev = info->icount;
3079 oldsigs = info->input_signal_events;
3080
3081 /* enable hunt and idle irqs if needed */
3082 if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) {
3083 unsigned char oldval = info->ie1_value;
3084 unsigned char newval = oldval +
3085 (mask & MgslEvent_ExitHuntMode ? FLGD:0) +
3086 (mask & MgslEvent_IdleReceived ? IDLD:0);
3087 if ( oldval != newval ) {
3088 info->ie1_value = newval;
3089 write_reg(info, IE1, info->ie1_value);
3090 }
3091 }
3092
3093 set_current_state(TASK_INTERRUPTIBLE);
3094 add_wait_queue(&info->event_wait_q, &wait);
3095
3096 spin_unlock_irqrestore(&info->lock,flags);
3097
3098 for(;;) {
3099 schedule();
3100 if (signal_pending(current)) {
3101 rc = -ERESTARTSYS;
3102 break;
3103 }
3104
3105 /* get current irq counts */
3106 spin_lock_irqsave(&info->lock,flags);
3107 cnow = info->icount;
3108 newsigs = info->input_signal_events;
3109 set_current_state(TASK_INTERRUPTIBLE);
3110 spin_unlock_irqrestore(&info->lock,flags);
3111
3112 /* if no change, wait aborted for some reason */
3113 if (newsigs.dsr_up == oldsigs.dsr_up &&
3114 newsigs.dsr_down == oldsigs.dsr_down &&
3115 newsigs.dcd_up == oldsigs.dcd_up &&
3116 newsigs.dcd_down == oldsigs.dcd_down &&
3117 newsigs.cts_up == oldsigs.cts_up &&
3118 newsigs.cts_down == oldsigs.cts_down &&
3119 newsigs.ri_up == oldsigs.ri_up &&
3120 newsigs.ri_down == oldsigs.ri_down &&
3121 cnow.exithunt == cprev.exithunt &&
3122 cnow.rxidle == cprev.rxidle) {
3123 rc = -EIO;
3124 break;
3125 }
3126
3127 events = mask &
3128 ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) +
3129 (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
3130 (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) +
3131 (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
3132 (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) +
3133 (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
3134 (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) +
3135 (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) +
3136 (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) +
3137 (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) );
3138 if (events)
3139 break;
3140
3141 cprev = cnow;
3142 oldsigs = newsigs;
3143 }
3144
3145 remove_wait_queue(&info->event_wait_q, &wait);
3146 set_current_state(TASK_RUNNING);
3147
3148
3149 if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
3150 spin_lock_irqsave(&info->lock,flags);
3151 if (!waitqueue_active(&info->event_wait_q)) {
3152 /* disable enable exit hunt mode/idle rcvd IRQs */
3153 info->ie1_value &= ~(FLGD|IDLD);
3154 write_reg(info, IE1, info->ie1_value);
3155 }
3156 spin_unlock_irqrestore(&info->lock,flags);
3157 }
3158 exit:
3159 if ( rc == 0 )
3160 PUT_USER(rc, events, mask_ptr);
3161
3162 return rc;
3163 }
3164
3165 static int modem_input_wait(SLMP_INFO *info,int arg)
3166 {
3167 unsigned long flags;
3168 int rc;
3169 struct mgsl_icount cprev, cnow;
3170 DECLARE_WAITQUEUE(wait, current);
3171
3172 /* save current irq counts */
3173 spin_lock_irqsave(&info->lock,flags);
3174 cprev = info->icount;
3175 add_wait_queue(&info->status_event_wait_q, &wait);
3176 set_current_state(TASK_INTERRUPTIBLE);
3177 spin_unlock_irqrestore(&info->lock,flags);
3178
3179 for(;;) {
3180 schedule();
3181 if (signal_pending(current)) {
3182 rc = -ERESTARTSYS;
3183 break;
3184 }
3185
3186 /* get new irq counts */
3187 spin_lock_irqsave(&info->lock,flags);
3188 cnow = info->icount;
3189 set_current_state(TASK_INTERRUPTIBLE);
3190 spin_unlock_irqrestore(&info->lock,flags);
3191
3192 /* if no change, wait aborted for some reason */
3193 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
3194 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
3195 rc = -EIO;
3196 break;
3197 }
3198
3199 /* check for change in caller specified modem input */
3200 if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
3201 (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
3202 (arg & TIOCM_CD && cnow.dcd != cprev.dcd) ||
3203 (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
3204 rc = 0;
3205 break;
3206 }
3207
3208 cprev = cnow;
3209 }
3210 remove_wait_queue(&info->status_event_wait_q, &wait);
3211 set_current_state(TASK_RUNNING);
3212 return rc;
3213 }
3214
3215 /* return the state of the serial control and status signals
3216 */
3217 static int tiocmget(struct tty_struct *tty, struct file *file)
3218 {
3219 SLMP_INFO *info = tty->driver_data;
3220 unsigned int result;
3221 unsigned long flags;
3222
3223 spin_lock_irqsave(&info->lock,flags);
3224 get_signals(info);
3225 spin_unlock_irqrestore(&info->lock,flags);
3226
3227 result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
3228 ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
3229 ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
3230 ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG:0) +
3231 ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
3232 ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0);
3233
3234 if (debug_level >= DEBUG_LEVEL_INFO)
3235 printk("%s(%d):%s tiocmget() value=%08X\n",
3236 __FILE__,__LINE__, info->device_name, result );
3237 return result;
3238 }
3239
3240 /* set modem control signals (DTR/RTS)
3241 */
3242 static int tiocmset(struct tty_struct *tty, struct file *file,
3243 unsigned int set, unsigned int clear)
3244 {
3245 SLMP_INFO *info = tty->driver_data;
3246 unsigned long flags;
3247
3248 if (debug_level >= DEBUG_LEVEL_INFO)
3249 printk("%s(%d):%s tiocmset(%x,%x)\n",
3250 __FILE__,__LINE__,info->device_name, set, clear);
3251
3252 if (set & TIOCM_RTS)
3253 info->serial_signals |= SerialSignal_RTS;
3254 if (set & TIOCM_DTR)
3255 info->serial_signals |= SerialSignal_DTR;
3256 if (clear & TIOCM_RTS)
3257 info->serial_signals &= ~SerialSignal_RTS;
3258 if (clear & TIOCM_DTR)
3259 info->serial_signals &= ~SerialSignal_DTR;
3260
3261 spin_lock_irqsave(&info->lock,flags);
3262 set_signals(info);
3263 spin_unlock_irqrestore(&info->lock,flags);
3264
3265 return 0;
3266 }
3267
3268 static int carrier_raised(struct tty_port *port)
3269 {
3270 SLMP_INFO *info = container_of(port, SLMP_INFO, port);
3271 unsigned long flags;
3272
3273 spin_lock_irqsave(&info->lock,flags);
3274 get_signals(info);
3275 spin_unlock_irqrestore(&info->lock,flags);
3276
3277 return (info->serial_signals & SerialSignal_DCD) ? 1 : 0;
3278 }
3279
3280 static void raise_dtr_rts(struct tty_port *port)
3281 {
3282 SLMP_INFO *info = container_of(port, SLMP_INFO, port);
3283 unsigned long flags;
3284
3285 spin_lock_irqsave(&info->lock,flags);
3286 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
3287 set_signals(info);
3288 spin_unlock_irqrestore(&info->lock,flags);
3289 }
3290
3291 /* Block the current process until the specified port is ready to open.
3292 */
3293 static int block_til_ready(struct tty_struct *tty, struct file *filp,
3294 SLMP_INFO *info)
3295 {
3296 DECLARE_WAITQUEUE(wait, current);
3297 int retval;
3298 bool do_clocal = false;
3299 bool extra_count = false;
3300 unsigned long flags;
3301 int cd;
3302 struct tty_port *port = &info->port;
3303
3304 if (debug_level >= DEBUG_LEVEL_INFO)
3305 printk("%s(%d):%s block_til_ready()\n",
3306 __FILE__,__LINE__, tty->driver->name );
3307
3308 if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
3309 /* nonblock mode is set or port is not enabled */
3310 /* just verify that callout device is not active */
3311 port->flags |= ASYNC_NORMAL_ACTIVE;
3312 return 0;
3313 }
3314
3315 if (tty->termios->c_cflag & CLOCAL)
3316 do_clocal = true;
3317
3318 /* Wait for carrier detect and the line to become
3319 * free (i.e., not in use by the callout). While we are in
3320 * this loop, port->count is dropped by one, so that
3321 * close() knows when to free things. We restore it upon
3322 * exit, either normal or abnormal.
3323 */
3324
3325 retval = 0;
3326 add_wait_queue(&port->open_wait, &wait);
3327
3328 if (debug_level >= DEBUG_LEVEL_INFO)
3329 printk("%s(%d):%s block_til_ready() before block, count=%d\n",
3330 __FILE__,__LINE__, tty->driver->name, port->count );
3331
3332 spin_lock_irqsave(&info->lock, flags);
3333 if (!tty_hung_up_p(filp)) {
3334 extra_count = true;
3335 port->count--;
3336 }
3337 spin_unlock_irqrestore(&info->lock, flags);
3338 port->blocked_open++;
3339
3340 while (1) {
3341 if (tty->termios->c_cflag & CBAUD)
3342 tty_port_raise_dtr_rts(port);
3343
3344 set_current_state(TASK_INTERRUPTIBLE);
3345
3346 if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){
3347 retval = (port->flags & ASYNC_HUP_NOTIFY) ?
3348 -EAGAIN : -ERESTARTSYS;
3349 break;
3350 }
3351
3352 cd = tty_port_carrier_raised(port);
3353
3354 if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd))
3355 break;
3356
3357 if (signal_pending(current)) {
3358 retval = -ERESTARTSYS;
3359 break;
3360 }
3361
3362 if (debug_level >= DEBUG_LEVEL_INFO)
3363 printk("%s(%d):%s block_til_ready() count=%d\n",
3364 __FILE__,__LINE__, tty->driver->name, port->count );
3365
3366 schedule();
3367 }
3368
3369 set_current_state(TASK_RUNNING);
3370 remove_wait_queue(&port->open_wait, &wait);
3371
3372 if (extra_count)
3373 port->count++;
3374 port->blocked_open--;
3375
3376 if (debug_level >= DEBUG_LEVEL_INFO)
3377 printk("%s(%d):%s block_til_ready() after, count=%d\n",
3378 __FILE__,__LINE__, tty->driver->name, port->count );
3379
3380 if (!retval)
3381 port->flags |= ASYNC_NORMAL_ACTIVE;
3382
3383 return retval;
3384 }
3385
3386 static int alloc_dma_bufs(SLMP_INFO *info)
3387 {
3388 unsigned short BuffersPerFrame;
3389 unsigned short BufferCount;
3390
3391 // Force allocation to start at 64K boundary for each port.
3392 // This is necessary because *all* buffer descriptors for a port
3393 // *must* be in the same 64K block. All descriptors on a port
3394 // share a common 'base' address (upper 8 bits of 24 bits) programmed
3395 // into the CBP register.
3396 info->port_array[0]->last_mem_alloc = (SCA_MEM_SIZE/4) * info->port_num;
3397
3398 /* Calculate the number of DMA buffers necessary to hold the */
3399 /* largest allowable frame size. Note: If the max frame size is */
3400 /* not an even multiple of the DMA buffer size then we need to */
3401 /* round the buffer count per frame up one. */
3402
3403 BuffersPerFrame = (unsigned short)(info->max_frame_size/SCABUFSIZE);
3404 if ( info->max_frame_size % SCABUFSIZE )
3405 BuffersPerFrame++;
3406
3407 /* calculate total number of data buffers (SCABUFSIZE) possible
3408 * in one ports memory (SCA_MEM_SIZE/4) after allocating memory
3409 * for the descriptor list (BUFFERLISTSIZE).
3410 */
3411 BufferCount = (SCA_MEM_SIZE/4 - BUFFERLISTSIZE)/SCABUFSIZE;
3412
3413 /* limit number of buffers to maximum amount of descriptors */
3414 if (BufferCount > BUFFERLISTSIZE/sizeof(SCADESC))
3415 BufferCount = BUFFERLISTSIZE/sizeof(SCADESC);
3416
3417 /* use enough buffers to transmit one max size frame */
3418 info->tx_buf_count = BuffersPerFrame + 1;
3419
3420 /* never use more than half the available buffers for transmit */
3421 if (info->tx_buf_count > (BufferCount/2))
3422 info->tx_buf_count = BufferCount/2;
3423
3424 if (info->tx_buf_count > SCAMAXDESC)
3425 info->tx_buf_count = SCAMAXDESC;
3426
3427 /* use remaining buffers for receive */
3428 info->rx_buf_count = BufferCount - info->tx_buf_count;
3429
3430 if (info->rx_buf_count > SCAMAXDESC)
3431 info->rx_buf_count = SCAMAXDESC;
3432
3433 if ( debug_level >= DEBUG_LEVEL_INFO )
3434 printk("%s(%d):%s Allocating %d TX and %d RX DMA buffers.\n",
3435 __FILE__,__LINE__, info->device_name,
3436 info->tx_buf_count,info->rx_buf_count);
3437
3438 if ( alloc_buf_list( info ) < 0 ||
3439 alloc_frame_bufs(info,
3440 info->rx_buf_list,
3441 info->rx_buf_list_ex,
3442 info->rx_buf_count) < 0 ||
3443 alloc_frame_bufs(info,
3444 info->tx_buf_list,
3445 info->tx_buf_list_ex,
3446 info->tx_buf_count) < 0 ||
3447 alloc_tmp_rx_buf(info) < 0 ) {
3448 printk("%s(%d):%s Can't allocate DMA buffer memory\n",
3449 __FILE__,__LINE__, info->device_name);
3450 return -ENOMEM;
3451 }
3452
3453 rx_reset_buffers( info );
3454
3455 return 0;
3456 }
3457
3458 /* Allocate DMA buffers for the transmit and receive descriptor lists.
3459 */
3460 static int alloc_buf_list(SLMP_INFO *info)
3461 {
3462 unsigned int i;
3463
3464 /* build list in adapter shared memory */
3465 info->buffer_list = info->memory_base + info->port_array[0]->last_mem_alloc;
3466 info->buffer_list_phys = info->port_array[0]->last_mem_alloc;
3467 info->port_array[0]->last_mem_alloc += BUFFERLISTSIZE;
3468
3469 memset(info->buffer_list, 0, BUFFERLISTSIZE);
3470
3471 /* Save virtual address pointers to the receive and */
3472 /* transmit buffer lists. (Receive 1st). These pointers will */
3473 /* be used by the processor to access the lists. */
3474 info->rx_buf_list = (SCADESC *)info->buffer_list;
3475
3476 info->tx_buf_list = (SCADESC *)info->buffer_list;
3477 info->tx_buf_list += info->rx_buf_count;
3478
3479 /* Build links for circular buffer entry lists (tx and rx)
3480 *
3481 * Note: links are physical addresses read by the SCA device
3482 * to determine the next buffer entry to use.
3483 */
3484
3485 for ( i = 0; i < info->rx_buf_count; i++ ) {
3486 /* calculate and store physical address of this buffer entry */
3487 info->rx_buf_list_ex[i].phys_entry =
3488 info->buffer_list_phys + (i * sizeof(SCABUFSIZE));
3489
3490 /* calculate and store physical address of */
3491 /* next entry in cirular list of entries */
3492 info->rx_buf_list[i].next = info->buffer_list_phys;
3493 if ( i < info->rx_buf_count - 1 )
3494 info->rx_buf_list[i].next += (i + 1) * sizeof(SCADESC);
3495
3496 info->rx_buf_list[i].length = SCABUFSIZE;
3497 }
3498
3499 for ( i = 0; i < info->tx_buf_count; i++ ) {
3500 /* calculate and store physical address of this buffer entry */
3501 info->tx_buf_list_ex[i].phys_entry = info->buffer_list_phys +
3502 ((info->rx_buf_count + i) * sizeof(SCADESC));
3503
3504 /* calculate and store physical address of */
3505 /* next entry in cirular list of entries */
3506
3507 info->tx_buf_list[i].next = info->buffer_list_phys +
3508 info->rx_buf_count * sizeof(SCADESC);
3509
3510 if ( i < info->tx_buf_count - 1 )
3511 info->tx_buf_list[i].next += (i + 1) * sizeof(SCADESC);
3512 }
3513
3514 return 0;
3515 }
3516
3517 /* Allocate the frame DMA buffers used by the specified buffer list.
3518 */
3519 static int alloc_frame_bufs(SLMP_INFO *info, SCADESC *buf_list,SCADESC_EX *buf_list_ex,int count)
3520 {
3521 int i;
3522 unsigned long phys_addr;
3523
3524 for ( i = 0; i < count; i++ ) {
3525 buf_list_ex[i].virt_addr = info->memory_base + info->port_array[0]->last_mem_alloc;
3526 phys_addr = info->port_array[0]->last_mem_alloc;
3527 info->port_array[0]->last_mem_alloc += SCABUFSIZE;
3528
3529 buf_list[i].buf_ptr = (unsigned short)phys_addr;
3530 buf_list[i].buf_base = (unsigned char)(phys_addr >> 16);
3531 }
3532
3533 return 0;
3534 }
3535
3536 static void free_dma_bufs(SLMP_INFO *info)
3537 {
3538 info->buffer_list = NULL;
3539 info->rx_buf_list = NULL;
3540 info->tx_buf_list = NULL;
3541 }
3542
3543 /* allocate buffer large enough to hold max_frame_size.
3544 * This buffer is used to pass an assembled frame to the line discipline.
3545 */
3546 static int alloc_tmp_rx_buf(SLMP_INFO *info)
3547 {
3548 info->tmp_rx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
3549 if (info->tmp_rx_buf == NULL)
3550 return -ENOMEM;
3551 return 0;
3552 }
3553
3554 static void free_tmp_rx_buf(SLMP_INFO *info)
3555 {
3556 kfree(info->tmp_rx_buf);
3557 info->tmp_rx_buf = NULL;
3558 }
3559
3560 static int claim_resources(SLMP_INFO *info)
3561 {
3562 if (request_mem_region(info->phys_memory_base,SCA_MEM_SIZE,"synclinkmp") == NULL) {
3563 printk( "%s(%d):%s mem addr conflict, Addr=%08X\n",
3564 __FILE__,__LINE__,info->device_name, info->phys_memory_base);
3565 info->init_error = DiagStatus_AddressConflict;
3566 goto errout;
3567 }
3568 else
3569 info->shared_mem_requested = true;
3570
3571 if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclinkmp") == NULL) {
3572 printk( "%s(%d):%s lcr mem addr conflict, Addr=%08X\n",
3573 __FILE__,__LINE__,info->device_name, info->phys_lcr_base);
3574 info->init_error = DiagStatus_AddressConflict;
3575 goto errout;
3576 }
3577 else
3578 info->lcr_mem_requested = true;
3579
3580 if (request_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE,"synclinkmp") == NULL) {
3581 printk( "%s(%d):%s sca mem addr conflict, Addr=%08X\n",
3582 __FILE__,__LINE__,info->device_name, info->phys_sca_base);
3583 info->init_error = DiagStatus_AddressConflict;
3584 goto errout;
3585 }
3586 else
3587 info->sca_base_requested = true;
3588
3589 if (request_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE,"synclinkmp") == NULL) {
3590 printk( "%s(%d):%s stat/ctrl mem addr conflict, Addr=%08X\n",
3591 __FILE__,__LINE__,info->device_name, info->phys_statctrl_base);
3592 info->init_error = DiagStatus_AddressConflict;
3593 goto errout;
3594 }
3595 else
3596 info->sca_statctrl_requested = true;
3597
3598 info->memory_base = ioremap_nocache(info->phys_memory_base,
3599 SCA_MEM_SIZE);
3600 if (!info->memory_base) {
3601 printk( "%s(%d):%s Cant map shared memory, MemAddr=%08X\n",
3602 __FILE__,__LINE__,info->device_name, info->phys_memory_base );
3603 info->init_error = DiagStatus_CantAssignPciResources;
3604 goto errout;
3605 }
3606
3607 info->lcr_base = ioremap_nocache(info->phys_lcr_base, PAGE_SIZE);
3608 if (!info->lcr_base) {
3609 printk( "%s(%d):%s Cant map LCR memory, MemAddr=%08X\n",
3610 __FILE__,__LINE__,info->device_name, info->phys_lcr_base );
3611 info->init_error = DiagStatus_CantAssignPciResources;
3612 goto errout;
3613 }
3614 info->lcr_base += info->lcr_offset;
3615
3616 info->sca_base = ioremap_nocache(info->phys_sca_base, PAGE_SIZE);
3617 if (!info->sca_base) {
3618 printk( "%s(%d):%s Cant map SCA memory, MemAddr=%08X\n",
3619 __FILE__,__LINE__,info->device_name, info->phys_sca_base );
3620 info->init_error = DiagStatus_CantAssignPciResources;
3621 goto errout;
3622 }
3623 info->sca_base += info->sca_offset;
3624
3625 info->statctrl_base = ioremap_nocache(info->phys_statctrl_base,
3626 PAGE_SIZE);
3627 if (!info->statctrl_base) {
3628 printk( "%s(%d):%s Cant map SCA Status/Control memory, MemAddr=%08X\n",
3629 __FILE__,__LINE__,info->device_name, info->phys_statctrl_base );
3630 info->init_error = DiagStatus_CantAssignPciResources;
3631 goto errout;
3632 }
3633 info->statctrl_base += info->statctrl_offset;
3634
3635 if ( !memory_test(info) ) {
3636 printk( "%s(%d):Shared Memory Test failed for device %s MemAddr=%08X\n",
3637 __FILE__,__LINE__,info->device_name, info->phys_memory_base );
3638 info->init_error = DiagStatus_MemoryError;
3639 goto errout;
3640 }
3641
3642 return 0;
3643
3644 errout:
3645 release_resources( info );
3646 return -ENODEV;
3647 }
3648
3649 static void release_resources(SLMP_INFO *info)
3650 {
3651 if ( debug_level >= DEBUG_LEVEL_INFO )
3652 printk( "%s(%d):%s release_resources() entry\n",
3653 __FILE__,__LINE__,info->device_name );
3654
3655 if ( info->irq_requested ) {
3656 free_irq(info->irq_level, info);
3657 info->irq_requested = false;
3658 }
3659
3660 if ( info->shared_mem_requested ) {
3661 release_mem_region(info->phys_memory_base,SCA_MEM_SIZE);
3662 info->shared_mem_requested = false;
3663 }
3664 if ( info->lcr_mem_requested ) {
3665 release_mem_region(info->phys_lcr_base + info->lcr_offset,128);
3666 info->lcr_mem_requested = false;
3667 }
3668 if ( info->sca_base_requested ) {
3669 release_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE);
3670 info->sca_base_requested = false;
3671 }
3672 if ( info->sca_statctrl_requested ) {
3673 release_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE);
3674 info->sca_statctrl_requested = false;
3675 }
3676
3677 if (info->memory_base){
3678 iounmap(info->memory_base);
3679 info->memory_base = NULL;
3680 }
3681
3682 if (info->sca_base) {
3683 iounmap(info->sca_base - info->sca_offset);
3684 info->sca_base=NULL;
3685 }
3686
3687 if (info->statctrl_base) {
3688 iounmap(info->statctrl_base - info->statctrl_offset);
3689 info->statctrl_base=NULL;
3690 }
3691
3692 if (info->lcr_base){
3693 iounmap(info->lcr_base - info->lcr_offset);
3694 info->lcr_base = NULL;
3695 }
3696
3697 if ( debug_level >= DEBUG_LEVEL_INFO )
3698 printk( "%s(%d):%s release_resources() exit\n",
3699 __FILE__,__LINE__,info->device_name );
3700 }
3701
3702 /* Add the specified device instance data structure to the
3703 * global linked list of devices and increment the device count.
3704 */
3705 static void add_device(SLMP_INFO *info)
3706 {
3707 info->next_device = NULL;
3708 info->line = synclinkmp_device_count;
3709 sprintf(info->device_name,"ttySLM%dp%d",info->adapter_num,info->port_num);
3710
3711 if (info->line < MAX_DEVICES) {
3712 if (maxframe[info->line])
3713 info->max_frame_size = maxframe[info->line];
3714 }
3715
3716 synclinkmp_device_count++;
3717
3718 if ( !synclinkmp_device_list )
3719 synclinkmp_device_list = info;
3720 else {
3721 SLMP_INFO *current_dev = synclinkmp_device_list;
3722 while( current_dev->next_device )
3723 current_dev = current_dev->next_device;
3724 current_dev->next_device = info;
3725 }
3726
3727 if ( info->max_frame_size < 4096 )
3728 info->max_frame_size = 4096;
3729 else if ( info->max_frame_size > 65535 )
3730 info->max_frame_size = 65535;
3731
3732 printk( "SyncLink MultiPort %s: "
3733 "Mem=(%08x %08X %08x %08X) IRQ=%d MaxFrameSize=%u\n",
3734 info->device_name,
3735 info->phys_sca_base,
3736 info->phys_memory_base,
3737 info->phys_statctrl_base,
3738 info->phys_lcr_base,
3739 info->irq_level,
3740 info->max_frame_size );
3741
3742 #if SYNCLINK_GENERIC_HDLC
3743 hdlcdev_init(info);
3744 #endif
3745 }
3746
3747 static const struct tty_port_operations port_ops = {
3748 .carrier_raised = carrier_raised,
3749 .raise_dtr_rts = raise_dtr_rts,
3750 };
3751
3752 /* Allocate and initialize a device instance structure
3753 *
3754 * Return Value: pointer to SLMP_INFO if success, otherwise NULL
3755 */
3756 static SLMP_INFO *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev)
3757 {
3758 SLMP_INFO *info;
3759
3760 info = kzalloc(sizeof(SLMP_INFO),
3761 GFP_KERNEL);
3762
3763 if (!info) {
3764 printk("%s(%d) Error can't allocate device instance data for adapter %d, port %d\n",
3765 __FILE__,__LINE__, adapter_num, port_num);
3766 } else {
3767 tty_port_init(&info->port);
3768 info->port.ops = &port_ops;
3769 info->magic = MGSL_MAGIC;
3770 INIT_WORK(&info->task, bh_handler);
3771 info->max_frame_size = 4096;
3772 info->port.close_delay = 5*HZ/10;
3773 info->port.closing_wait = 30*HZ;
3774 init_waitqueue_head(&info->status_event_wait_q);
3775 init_waitqueue_head(&info->event_wait_q);
3776 spin_lock_init(&info->netlock);
3777 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
3778 info->idle_mode = HDLC_TXIDLE_FLAGS;
3779 info->adapter_num = adapter_num;
3780 info->port_num = port_num;
3781
3782 /* Copy configuration info to device instance data */
3783 info->irq_level = pdev->irq;
3784 info->phys_lcr_base = pci_resource_start(pdev,0);
3785 info->phys_sca_base = pci_resource_start(pdev,2);
3786 info->phys_memory_base = pci_resource_start(pdev,3);
3787 info->phys_statctrl_base = pci_resource_start(pdev,4);
3788
3789 /* Because veremap only works on page boundaries we must map
3790 * a larger area than is actually implemented for the LCR
3791 * memory range. We map a full page starting at the page boundary.
3792 */
3793 info->lcr_offset = info->phys_lcr_base & (PAGE_SIZE-1);
3794 info->phys_lcr_base &= ~(PAGE_SIZE-1);
3795
3796 info->sca_offset = info->phys_sca_base & (PAGE_SIZE-1);
3797 info->phys_sca_base &= ~(PAGE_SIZE-1);
3798
3799 info->statctrl_offset = info->phys_statctrl_base & (PAGE_SIZE-1);
3800 info->phys_statctrl_base &= ~(PAGE_SIZE-1);
3801
3802 info->bus_type = MGSL_BUS_TYPE_PCI;
3803 info->irq_flags = IRQF_SHARED;
3804
3805 setup_timer(&info->tx_timer, tx_timeout, (unsigned long)info);
3806 setup_timer(&info->status_timer, status_timeout,
3807 (unsigned long)info);
3808
3809 /* Store the PCI9050 misc control register value because a flaw
3810 * in the PCI9050 prevents LCR registers from being read if
3811 * BIOS assigns an LCR base address with bit 7 set.
3812 *
3813 * Only the misc control register is accessed for which only
3814 * write access is needed, so set an initial value and change
3815 * bits to the device instance data as we write the value
3816 * to the actual misc control register.
3817 */
3818 info->misc_ctrl_value = 0x087e4546;
3819
3820 /* initial port state is unknown - if startup errors
3821 * occur, init_error will be set to indicate the
3822 * problem. Once the port is fully initialized,
3823 * this value will be set to 0 to indicate the
3824 * port is available.
3825 */
3826 info->init_error = -1;
3827 }
3828
3829 return info;
3830 }
3831
3832 static void device_init(int adapter_num, struct pci_dev *pdev)
3833 {
3834 SLMP_INFO *port_array[SCA_MAX_PORTS];
3835 int port;
3836
3837 /* allocate device instances for up to SCA_MAX_PORTS devices */
3838 for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
3839 port_array[port] = alloc_dev(adapter_num,port,pdev);
3840 if( port_array[port] == NULL ) {
3841 for ( --port; port >= 0; --port )
3842 kfree(port_array[port]);
3843 return;
3844 }
3845 }
3846
3847 /* give copy of port_array to all ports and add to device list */
3848 for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
3849 memcpy(port_array[port]->port_array,port_array,sizeof(port_array));
3850 add_device( port_array[port] );
3851 spin_lock_init(&port_array[port]->lock);
3852 }
3853
3854 /* Allocate and claim adapter resources */
3855 if ( !claim_resources(port_array[0]) ) {
3856
3857 alloc_dma_bufs(port_array[0]);
3858
3859 /* copy resource information from first port to others */
3860 for ( port = 1; port < SCA_MAX_PORTS; ++port ) {
3861 port_array[port]->lock = port_array[0]->lock;
3862 port_array[port]->irq_level = port_array[0]->irq_level;
3863 port_array[port]->memory_base = port_array[0]->memory_base;
3864 port_array[port]->sca_base = port_array[0]->sca_base;
3865 port_array[port]->statctrl_base = port_array[0]->statctrl_base;
3866 port_array[port]->lcr_base = port_array[0]->lcr_base;
3867 alloc_dma_bufs(port_array[port]);
3868 }
3869
3870 if ( request_irq(port_array[0]->irq_level,
3871 synclinkmp_interrupt,
3872 port_array[0]->irq_flags,
3873 port_array[0]->device_name,
3874 port_array[0]) < 0 ) {
3875 printk( "%s(%d):%s Cant request interrupt, IRQ=%d\n",
3876 __FILE__,__LINE__,
3877 port_array[0]->device_name,
3878 port_array[0]->irq_level );
3879 }
3880 else {
3881 port_array[0]->irq_requested = true;
3882 adapter_test(port_array[0]);
3883 }
3884 }
3885 }
3886
3887 static const struct tty_operations ops = {
3888 .open = open,
3889 .close = close,
3890 .write = write,
3891 .put_char = put_char,
3892 .flush_chars = flush_chars,
3893 .write_room = write_room,
3894 .chars_in_buffer = chars_in_buffer,
3895 .flush_buffer = flush_buffer,
3896 .ioctl = ioctl,
3897 .throttle = throttle,
3898 .unthrottle = unthrottle,
3899 .send_xchar = send_xchar,
3900 .break_ctl = set_break,
3901 .wait_until_sent = wait_until_sent,
3902 .set_termios = set_termios,
3903 .stop = tx_hold,
3904 .start = tx_release,
3905 .hangup = hangup,
3906 .tiocmget = tiocmget,
3907 .tiocmset = tiocmset,
3908 .proc_fops = &synclinkmp_proc_fops,
3909 };
3910
3911
3912 static void synclinkmp_cleanup(void)
3913 {
3914 int rc;
3915 SLMP_INFO *info;
3916 SLMP_INFO *tmp;
3917
3918 printk("Unloading %s %s\n", driver_name, driver_version);
3919
3920 if (serial_driver) {
3921 if ((rc = tty_unregister_driver(serial_driver)))
3922 printk("%s(%d) failed to unregister tty driver err=%d\n",
3923 __FILE__,__LINE__,rc);
3924 put_tty_driver(serial_driver);
3925 }
3926
3927 /* reset devices */
3928 info = synclinkmp_device_list;
3929 while(info) {
3930 reset_port(info);
3931 info = info->next_device;
3932 }
3933
3934 /* release devices */
3935 info = synclinkmp_device_list;
3936 while(info) {
3937 #if SYNCLINK_GENERIC_HDLC
3938 hdlcdev_exit(info);
3939 #endif
3940 free_dma_bufs(info);
3941 free_tmp_rx_buf(info);
3942 if ( info->port_num == 0 ) {
3943 if (info->sca_base)
3944 write_reg(info, LPR, 1); /* set low power mode */
3945 release_resources(info);
3946 }
3947 tmp = info;
3948 info = info->next_device;
3949 kfree(tmp);
3950 }
3951
3952 pci_unregister_driver(&synclinkmp_pci_driver);
3953 }
3954
3955 /* Driver initialization entry point.
3956 */
3957
3958 static int __init synclinkmp_init(void)
3959 {
3960 int rc;
3961
3962 if (break_on_load) {
3963 synclinkmp_get_text_ptr();
3964 BREAKPOINT();
3965 }
3966
3967 printk("%s %s\n", driver_name, driver_version);
3968
3969 if ((rc = pci_register_driver(&synclinkmp_pci_driver)) < 0) {
3970 printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc);
3971 return rc;
3972 }
3973
3974 serial_driver = alloc_tty_driver(128);
3975 if (!serial_driver) {
3976 rc = -ENOMEM;
3977 goto error;
3978 }
3979
3980 /* Initialize the tty_driver structure */
3981
3982 serial_driver->owner = THIS_MODULE;
3983 serial_driver->driver_name = "synclinkmp";
3984 serial_driver->name = "ttySLM";
3985 serial_driver->major = ttymajor;
3986 serial_driver->minor_start = 64;
3987 serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
3988 serial_driver->subtype = SERIAL_TYPE_NORMAL;
3989 serial_driver->init_termios = tty_std_termios;
3990 serial_driver->init_termios.c_cflag =
3991 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
3992 serial_driver->init_termios.c_ispeed = 9600;
3993 serial_driver->init_termios.c_ospeed = 9600;
3994 serial_driver->flags = TTY_DRIVER_REAL_RAW;
3995 tty_set_operations(serial_driver, &ops);
3996 if ((rc = tty_register_driver(serial_driver)) < 0) {
3997 printk("%s(%d):Couldn't register serial driver\n",
3998 __FILE__,__LINE__);
3999 put_tty_driver(serial_driver);
4000 serial_driver = NULL;
4001 goto error;
4002 }
4003
4004 printk("%s %s, tty major#%d\n",
4005 driver_name, driver_version,
4006 serial_driver->major);
4007
4008 return 0;
4009
4010 error:
4011 synclinkmp_cleanup();
4012 return rc;
4013 }
4014
4015 static void __exit synclinkmp_exit(void)
4016 {
4017 synclinkmp_cleanup();
4018 }
4019
4020 module_init(synclinkmp_init);
4021 module_exit(synclinkmp_exit);
4022
4023 /* Set the port for internal loopback mode.
4024 * The TxCLK and RxCLK signals are generated from the BRG and
4025 * the TxD is looped back to the RxD internally.
4026 */
4027 static void enable_loopback(SLMP_INFO *info, int enable)
4028 {
4029 if (enable) {
4030 /* MD2 (Mode Register 2)
4031 * 01..00 CNCT<1..0> Channel Connection 11=Local Loopback
4032 */
4033 write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) | (BIT1 + BIT0)));
4034
4035 /* degate external TxC clock source */
4036 info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
4037 write_control_reg(info);
4038
4039 /* RXS/TXS (Rx/Tx clock source)
4040 * 07 Reserved, must be 0
4041 * 06..04 Clock Source, 100=BRG
4042 * 03..00 Clock Divisor, 0000=1
4043 */
4044 write_reg(info, RXS, 0x40);
4045 write_reg(info, TXS, 0x40);
4046
4047 } else {
4048 /* MD2 (Mode Register 2)
4049 * 01..00 CNCT<1..0> Channel connection, 0=normal
4050 */
4051 write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) & ~(BIT1 + BIT0)));
4052
4053 /* RXS/TXS (Rx/Tx clock source)
4054 * 07 Reserved, must be 0
4055 * 06..04 Clock Source, 000=RxC/TxC Pin
4056 * 03..00 Clock Divisor, 0000=1
4057 */
4058 write_reg(info, RXS, 0x00);
4059 write_reg(info, TXS, 0x00);
4060 }
4061
4062 /* set LinkSpeed if available, otherwise default to 2Mbps */
4063 if (info->params.clock_speed)
4064 set_rate(info, info->params.clock_speed);
4065 else
4066 set_rate(info, 3686400);
4067 }
4068
4069 /* Set the baud rate register to the desired speed
4070 *
4071 * data_rate data rate of clock in bits per second
4072 * A data rate of 0 disables the AUX clock.
4073 */
4074 static void set_rate( SLMP_INFO *info, u32 data_rate )
4075 {
4076 u32 TMCValue;
4077 unsigned char BRValue;
4078 u32 Divisor=0;
4079
4080 /* fBRG = fCLK/(TMC * 2^BR)
4081 */
4082 if (data_rate != 0) {
4083 Divisor = 14745600/data_rate;
4084 if (!Divisor)
4085 Divisor = 1;
4086
4087 TMCValue = Divisor;
4088
4089 BRValue = 0;
4090 if (TMCValue != 1 && TMCValue != 2) {
4091 /* BRValue of 0 provides 50/50 duty cycle *only* when
4092 * TMCValue is 1 or 2. BRValue of 1 to 9 always provides
4093 * 50/50 duty cycle.
4094 */
4095 BRValue = 1;
4096 TMCValue >>= 1;
4097 }
4098
4099 /* while TMCValue is too big for TMC register, divide
4100 * by 2 and increment BR exponent.
4101 */
4102 for(; TMCValue > 256 && BRValue < 10; BRValue++)
4103 TMCValue >>= 1;
4104
4105 write_reg(info, TXS,
4106 (unsigned char)((read_reg(info, TXS) & 0xf0) | BRValue));
4107 write_reg(info, RXS,
4108 (unsigned char)((read_reg(info, RXS) & 0xf0) | BRValue));
4109 write_reg(info, TMC, (unsigned char)TMCValue);
4110 }
4111 else {
4112 write_reg(info, TXS,0);
4113 write_reg(info, RXS,0);
4114 write_reg(info, TMC, 0);
4115 }
4116 }
4117
4118 /* Disable receiver
4119 */
4120 static void rx_stop(SLMP_INFO *info)
4121 {
4122 if (debug_level >= DEBUG_LEVEL_ISR)
4123 printk("%s(%d):%s rx_stop()\n",
4124 __FILE__,__LINE__, info->device_name );
4125
4126 write_reg(info, CMD, RXRESET);
4127
4128 info->ie0_value &= ~RXRDYE;
4129 write_reg(info, IE0, info->ie0_value); /* disable Rx data interrupts */
4130
4131 write_reg(info, RXDMA + DSR, 0); /* disable Rx DMA */
4132 write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */
4133 write_reg(info, RXDMA + DIR, 0); /* disable Rx DMA interrupts */
4134
4135 info->rx_enabled = false;
4136 info->rx_overflow = false;
4137 }
4138
4139 /* enable the receiver
4140 */
4141 static void rx_start(SLMP_INFO *info)
4142 {
4143 int i;
4144
4145 if (debug_level >= DEBUG_LEVEL_ISR)
4146 printk("%s(%d):%s rx_start()\n",
4147 __FILE__,__LINE__, info->device_name );
4148
4149 write_reg(info, CMD, RXRESET);
4150
4151 if ( info->params.mode == MGSL_MODE_HDLC ) {
4152 /* HDLC, disabe IRQ on rxdata */
4153 info->ie0_value &= ~RXRDYE;
4154 write_reg(info, IE0, info->ie0_value);
4155
4156 /* Reset all Rx DMA buffers and program rx dma */
4157 write_reg(info, RXDMA + DSR, 0); /* disable Rx DMA */
4158 write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */
4159
4160 for (i = 0; i < info->rx_buf_count; i++) {
4161 info->rx_buf_list[i].status = 0xff;
4162
4163 // throttle to 4 shared memory writes at a time to prevent
4164 // hogging local bus (keep latency time for DMA requests low).
4165 if (!(i % 4))
4166 read_status_reg(info);
4167 }
4168 info->current_rx_buf = 0;
4169
4170 /* set current/1st descriptor address */
4171 write_reg16(info, RXDMA + CDA,
4172 info->rx_buf_list_ex[0].phys_entry);
4173
4174 /* set new last rx descriptor address */
4175 write_reg16(info, RXDMA + EDA,
4176 info->rx_buf_list_ex[info->rx_buf_count - 1].phys_entry);
4177
4178 /* set buffer length (shared by all rx dma data buffers) */
4179 write_reg16(info, RXDMA + BFL, SCABUFSIZE);
4180
4181 write_reg(info, RXDMA + DIR, 0x60); /* enable Rx DMA interrupts (EOM/BOF) */
4182 write_reg(info, RXDMA + DSR, 0xf2); /* clear Rx DMA IRQs, enable Rx DMA */
4183 } else {
4184 /* async, enable IRQ on rxdata */
4185 info->ie0_value |= RXRDYE;
4186 write_reg(info, IE0, info->ie0_value);
4187 }
4188
4189 write_reg(info, CMD, RXENABLE);
4190
4191 info->rx_overflow = false;
4192 info->rx_enabled = true;
4193 }
4194
4195 /* Enable the transmitter and send a transmit frame if
4196 * one is loaded in the DMA buffers.
4197 */
4198 static void tx_start(SLMP_INFO *info)
4199 {
4200 if (debug_level >= DEBUG_LEVEL_ISR)
4201 printk("%s(%d):%s tx_start() tx_count=%d\n",
4202 __FILE__,__LINE__, info->device_name,info->tx_count );
4203
4204 if (!info->tx_enabled ) {
4205 write_reg(info, CMD, TXRESET);
4206 write_reg(info, CMD, TXENABLE);
4207 info->tx_enabled = true;
4208 }
4209
4210 if ( info->tx_count ) {
4211
4212 /* If auto RTS enabled and RTS is inactive, then assert */
4213 /* RTS and set a flag indicating that the driver should */
4214 /* negate RTS when the transmission completes. */
4215
4216 info->drop_rts_on_tx_done = false;
4217
4218 if (info->params.mode != MGSL_MODE_ASYNC) {
4219
4220 if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) {
4221 get_signals( info );
4222 if ( !(info->serial_signals & SerialSignal_RTS) ) {
4223 info->serial_signals |= SerialSignal_RTS;
4224 set_signals( info );
4225 info->drop_rts_on_tx_done = true;
4226 }
4227 }
4228
4229 write_reg16(info, TRC0,
4230 (unsigned short)(((tx_negate_fifo_level-1)<<8) + tx_active_fifo_level));
4231
4232 write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */
4233 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
4234
4235 /* set TX CDA (current descriptor address) */
4236 write_reg16(info, TXDMA + CDA,
4237 info->tx_buf_list_ex[0].phys_entry);
4238
4239 /* set TX EDA (last descriptor address) */
4240 write_reg16(info, TXDMA + EDA,
4241 info->tx_buf_list_ex[info->last_tx_buf].phys_entry);
4242
4243 /* enable underrun IRQ */
4244 info->ie1_value &= ~IDLE;
4245 info->ie1_value |= UDRN;
4246 write_reg(info, IE1, info->ie1_value);
4247 write_reg(info, SR1, (unsigned char)(IDLE + UDRN));
4248
4249 write_reg(info, TXDMA + DIR, 0x40); /* enable Tx DMA interrupts (EOM) */
4250 write_reg(info, TXDMA + DSR, 0xf2); /* clear Tx DMA IRQs, enable Tx DMA */
4251
4252 mod_timer(&info->tx_timer, jiffies +
4253 msecs_to_jiffies(5000));
4254 }
4255 else {
4256 tx_load_fifo(info);
4257 /* async, enable IRQ on txdata */
4258 info->ie0_value |= TXRDYE;
4259 write_reg(info, IE0, info->ie0_value);
4260 }
4261
4262 info->tx_active = true;
4263 }
4264 }
4265
4266 /* stop the transmitter and DMA
4267 */
4268 static void tx_stop( SLMP_INFO *info )
4269 {
4270 if (debug_level >= DEBUG_LEVEL_ISR)
4271 printk("%s(%d):%s tx_stop()\n",
4272 __FILE__,__LINE__, info->device_name );
4273
4274 del_timer(&info->tx_timer);
4275
4276 write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */
4277 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
4278
4279 write_reg(info, CMD, TXRESET);
4280
4281 info->ie1_value &= ~(UDRN + IDLE);
4282 write_reg(info, IE1, info->ie1_value); /* disable tx status interrupts */
4283 write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); /* clear pending */
4284
4285 info->ie0_value &= ~TXRDYE;
4286 write_reg(info, IE0, info->ie0_value); /* disable tx data interrupts */
4287
4288 info->tx_enabled = false;
4289 info->tx_active = false;
4290 }
4291
4292 /* Fill the transmit FIFO until the FIFO is full or
4293 * there is no more data to load.
4294 */
4295 static void tx_load_fifo(SLMP_INFO *info)
4296 {
4297 u8 TwoBytes[2];
4298
4299 /* do nothing is now tx data available and no XON/XOFF pending */
4300
4301 if ( !info->tx_count && !info->x_char )
4302 return;
4303
4304 /* load the Transmit FIFO until FIFOs full or all data sent */
4305
4306 while( info->tx_count && (read_reg(info,SR0) & BIT1) ) {
4307
4308 /* there is more space in the transmit FIFO and */
4309 /* there is more data in transmit buffer */
4310
4311 if ( (info->tx_count > 1) && !info->x_char ) {
4312 /* write 16-bits */
4313 TwoBytes[0] = info->tx_buf[info->tx_get++];
4314 if (info->tx_get >= info->max_frame_size)
4315 info->tx_get -= info->max_frame_size;
4316 TwoBytes[1] = info->tx_buf[info->tx_get++];
4317 if (info->tx_get >= info->max_frame_size)
4318 info->tx_get -= info->max_frame_size;
4319
4320 write_reg16(info, TRB, *((u16 *)TwoBytes));
4321
4322 info->tx_count -= 2;
4323 info->icount.tx += 2;
4324 } else {
4325 /* only 1 byte left to transmit or 1 FIFO slot left */
4326
4327 if (info->x_char) {
4328 /* transmit pending high priority char */
4329 write_reg(info, TRB, info->x_char);
4330 info->x_char = 0;
4331 } else {
4332 write_reg(info, TRB, info->tx_buf[info->tx_get++]);
4333 if (info->tx_get >= info->max_frame_size)
4334 info->tx_get -= info->max_frame_size;
4335 info->tx_count--;
4336 }
4337 info->icount.tx++;
4338 }
4339 }
4340 }
4341
4342 /* Reset a port to a known state
4343 */
4344 static void reset_port(SLMP_INFO *info)
4345 {
4346 if (info->sca_base) {
4347
4348 tx_stop(info);
4349 rx_stop(info);
4350
4351 info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
4352 set_signals(info);
4353
4354 /* disable all port interrupts */
4355 info->ie0_value = 0;
4356 info->ie1_value = 0;
4357 info->ie2_value = 0;
4358 write_reg(info, IE0, info->ie0_value);
4359 write_reg(info, IE1, info->ie1_value);
4360 write_reg(info, IE2, info->ie2_value);
4361
4362 write_reg(info, CMD, CHRESET);
4363 }
4364 }
4365
4366 /* Reset all the ports to a known state.
4367 */
4368 static void reset_adapter(SLMP_INFO *info)
4369 {
4370 int i;
4371
4372 for ( i=0; i < SCA_MAX_PORTS; ++i) {
4373 if (info->port_array[i])
4374 reset_port(info->port_array[i]);
4375 }
4376 }
4377
4378 /* Program port for asynchronous communications.
4379 */
4380 static void async_mode(SLMP_INFO *info)
4381 {
4382
4383 unsigned char RegValue;
4384
4385 tx_stop(info);
4386 rx_stop(info);
4387
4388 /* MD0, Mode Register 0
4389 *
4390 * 07..05 PRCTL<2..0>, Protocol Mode, 000=async
4391 * 04 AUTO, Auto-enable (RTS/CTS/DCD)
4392 * 03 Reserved, must be 0
4393 * 02 CRCCC, CRC Calculation, 0=disabled
4394 * 01..00 STOP<1..0> Stop bits (00=1,10=2)
4395 *
4396 * 0000 0000
4397 */
4398 RegValue = 0x00;
4399 if (info->params.stop_bits != 1)
4400 RegValue |= BIT1;
4401 write_reg(info, MD0, RegValue);
4402
4403 /* MD1, Mode Register 1
4404 *
4405 * 07..06 BRATE<1..0>, bit rate, 00=1/1 01=1/16 10=1/32 11=1/64
4406 * 05..04 TXCHR<1..0>, tx char size, 00=8 bits,01=7,10=6,11=5
4407 * 03..02 RXCHR<1..0>, rx char size
4408 * 01..00 PMPM<1..0>, Parity mode, 00=none 10=even 11=odd
4409 *
4410 * 0100 0000
4411 */
4412 RegValue = 0x40;
4413 switch (info->params.data_bits) {
4414 case 7: RegValue |= BIT4 + BIT2; break;
4415 case 6: RegValue |= BIT5 + BIT3; break;
4416 case 5: RegValue |= BIT5 + BIT4 + BIT3 + BIT2; break;
4417 }
4418 if (info->params.parity != ASYNC_PARITY_NONE) {
4419 RegValue |= BIT1;
4420 if (info->params.parity == ASYNC_PARITY_ODD)
4421 RegValue |= BIT0;
4422 }
4423 write_reg(info, MD1, RegValue);
4424
4425 /* MD2, Mode Register 2
4426 *
4427 * 07..02 Reserved, must be 0
4428 * 01..00 CNCT<1..0> Channel connection, 00=normal 11=local loopback
4429 *
4430 * 0000 0000
4431 */
4432 RegValue = 0x00;
4433 if (info->params.loopback)
4434 RegValue |= (BIT1 + BIT0);
4435 write_reg(info, MD2, RegValue);
4436
4437 /* RXS, Receive clock source
4438 *
4439 * 07 Reserved, must be 0
4440 * 06..04 RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL
4441 * 03..00 RXBR<3..0>, rate divisor, 0000=1
4442 */
4443 RegValue=BIT6;
4444 write_reg(info, RXS, RegValue);
4445
4446 /* TXS, Transmit clock source
4447 *
4448 * 07 Reserved, must be 0
4449 * 06..04 RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock
4450 * 03..00 RXBR<3..0>, rate divisor, 0000=1
4451 */
4452 RegValue=BIT6;
4453 write_reg(info, TXS, RegValue);
4454
4455 /* Control Register
4456 *
4457 * 6,4,2,0 CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out
4458 */
4459 info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
4460 write_control_reg(info);
4461
4462 tx_set_idle(info);
4463
4464 /* RRC Receive Ready Control 0
4465 *
4466 * 07..05 Reserved, must be 0
4467 * 04..00 RRC<4..0> Rx FIFO trigger active 0x00 = 1 byte
4468 */
4469 write_reg(info, RRC, 0x00);
4470
4471 /* TRC0 Transmit Ready Control 0
4472 *
4473 * 07..05 Reserved, must be 0
4474 * 04..00 TRC<4..0> Tx FIFO trigger active 0x10 = 16 bytes
4475 */
4476 write_reg(info, TRC0, 0x10);
4477
4478 /* TRC1 Transmit Ready Control 1
4479 *
4480 * 07..05 Reserved, must be 0
4481 * 04..00 TRC<4..0> Tx FIFO trigger inactive 0x1e = 31 bytes (full-1)
4482 */
4483 write_reg(info, TRC1, 0x1e);
4484
4485 /* CTL, MSCI control register
4486 *
4487 * 07..06 Reserved, set to 0
4488 * 05 UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC)
4489 * 04 IDLC, idle control, 0=mark 1=idle register
4490 * 03 BRK, break, 0=off 1 =on (async)
4491 * 02 SYNCLD, sync char load enable (BSC) 1=enabled
4492 * 01 GOP, go active on poll (LOOP mode) 1=enabled
4493 * 00 RTS, RTS output control, 0=active 1=inactive
4494 *
4495 * 0001 0001
4496 */
4497 RegValue = 0x10;
4498 if (!(info->serial_signals & SerialSignal_RTS))
4499 RegValue |= 0x01;
4500 write_reg(info, CTL, RegValue);
4501
4502 /* enable status interrupts */
4503 info->ie0_value |= TXINTE + RXINTE;
4504 write_reg(info, IE0, info->ie0_value);
4505
4506 /* enable break detect interrupt */
4507 info->ie1_value = BRKD;
4508 write_reg(info, IE1, info->ie1_value);
4509
4510 /* enable rx overrun interrupt */
4511 info->ie2_value = OVRN;
4512 write_reg(info, IE2, info->ie2_value);
4513
4514 set_rate( info, info->params.data_rate * 16 );
4515 }
4516
4517 /* Program the SCA for HDLC communications.
4518 */
4519 static void hdlc_mode(SLMP_INFO *info)
4520 {
4521 unsigned char RegValue;
4522 u32 DpllDivisor;
4523
4524 // Can't use DPLL because SCA outputs recovered clock on RxC when
4525 // DPLL mode selected. This causes output contention with RxC receiver.
4526 // Use of DPLL would require external hardware to disable RxC receiver
4527 // when DPLL mode selected.
4528 info->params.flags &= ~(HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL);
4529
4530 /* disable DMA interrupts */
4531 write_reg(info, TXDMA + DIR, 0);
4532 write_reg(info, RXDMA + DIR, 0);
4533
4534 /* MD0, Mode Register 0
4535 *
4536 * 07..05 PRCTL<2..0>, Protocol Mode, 100=HDLC
4537 * 04 AUTO, Auto-enable (RTS/CTS/DCD)
4538 * 03 Reserved, must be 0
4539 * 02 CRCCC, CRC Calculation, 1=enabled
4540 * 01 CRC1, CRC selection, 0=CRC-16,1=CRC-CCITT-16
4541 * 00 CRC0, CRC initial value, 1 = all 1s
4542 *
4543 * 1000 0001
4544 */
4545 RegValue = 0x81;
4546 if (info->params.flags & HDLC_FLAG_AUTO_CTS)
4547 RegValue |= BIT4;
4548 if (info->params.flags & HDLC_FLAG_AUTO_DCD)
4549 RegValue |= BIT4;
4550 if (info->params.crc_type == HDLC_CRC_16_CCITT)
4551 RegValue |= BIT2 + BIT1;
4552 write_reg(info, MD0, RegValue);
4553
4554 /* MD1, Mode Register 1
4555 *
4556 * 07..06 ADDRS<1..0>, Address detect, 00=no addr check
4557 * 05..04 TXCHR<1..0>, tx char size, 00=8 bits
4558 * 03..02 RXCHR<1..0>, rx char size, 00=8 bits
4559 * 01..00 PMPM<1..0>, Parity mode, 00=no parity
4560 *
4561 * 0000 0000
4562 */
4563 RegValue = 0x00;
4564 write_reg(info, MD1, RegValue);
4565
4566 /* MD2, Mode Register 2
4567 *
4568 * 07 NRZFM, 0=NRZ, 1=FM
4569 * 06..05 CODE<1..0> Encoding, 00=NRZ
4570 * 04..03 DRATE<1..0> DPLL Divisor, 00=8
4571 * 02 Reserved, must be 0
4572 * 01..00 CNCT<1..0> Channel connection, 0=normal
4573 *
4574 * 0000 0000
4575 */
4576 RegValue = 0x00;
4577 switch(info->params.encoding) {
4578 case HDLC_ENCODING_NRZI: RegValue |= BIT5; break;
4579 case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT7 + BIT5; break; /* aka FM1 */
4580 case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT7 + BIT6; break; /* aka FM0 */
4581 case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT7; break; /* aka Manchester */
4582 #if 0
4583 case HDLC_ENCODING_NRZB: /* not supported */
4584 case HDLC_ENCODING_NRZI_MARK: /* not supported */
4585 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: /* not supported */
4586 #endif
4587 }
4588 if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) {
4589 DpllDivisor = 16;
4590 RegValue |= BIT3;
4591 } else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) {
4592 DpllDivisor = 8;
4593 } else {
4594 DpllDivisor = 32;
4595 RegValue |= BIT4;
4596 }
4597 write_reg(info, MD2, RegValue);
4598
4599
4600 /* RXS, Receive clock source
4601 *
4602 * 07 Reserved, must be 0
4603 * 06..04 RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL
4604 * 03..00 RXBR<3..0>, rate divisor, 0000=1
4605 */
4606 RegValue=0;
4607 if (info->params.flags & HDLC_FLAG_RXC_BRG)
4608 RegValue |= BIT6;
4609 if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4610 RegValue |= BIT6 + BIT5;
4611 write_reg(info, RXS, RegValue);
4612
4613 /* TXS, Transmit clock source
4614 *
4615 * 07 Reserved, must be 0
4616 * 06..04 RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock
4617 * 03..00 RXBR<3..0>, rate divisor, 0000=1
4618 */
4619 RegValue=0;
4620 if (info->params.flags & HDLC_FLAG_TXC_BRG)
4621 RegValue |= BIT6;
4622 if (info->params.flags & HDLC_FLAG_TXC_DPLL)
4623 RegValue |= BIT6 + BIT5;
4624 write_reg(info, TXS, RegValue);
4625
4626 if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4627 set_rate(info, info->params.clock_speed * DpllDivisor);
4628 else
4629 set_rate(info, info->params.clock_speed);
4630
4631 /* GPDATA (General Purpose I/O Data Register)
4632 *
4633 * 6,4,2,0 CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out
4634 */
4635 if (info->params.flags & HDLC_FLAG_TXC_BRG)
4636 info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
4637 else
4638 info->port_array[0]->ctrlreg_value &= ~(BIT0 << (info->port_num * 2));
4639 write_control_reg(info);
4640
4641 /* RRC Receive Ready Control 0
4642 *
4643 * 07..05 Reserved, must be 0
4644 * 04..00 RRC<4..0> Rx FIFO trigger active
4645 */
4646 write_reg(info, RRC, rx_active_fifo_level);
4647
4648 /* TRC0 Transmit Ready Control 0
4649 *
4650 * 07..05 Reserved, must be 0
4651 * 04..00 TRC<4..0> Tx FIFO trigger active
4652 */
4653 write_reg(info, TRC0, tx_active_fifo_level);
4654
4655 /* TRC1 Transmit Ready Control 1
4656 *
4657 * 07..05 Reserved, must be 0
4658 * 04..00 TRC<4..0> Tx FIFO trigger inactive 0x1f = 32 bytes (full)
4659 */
4660 write_reg(info, TRC1, (unsigned char)(tx_negate_fifo_level - 1));
4661
4662 /* DMR, DMA Mode Register
4663 *
4664 * 07..05 Reserved, must be 0
4665 * 04 TMOD, Transfer Mode: 1=chained-block
4666 * 03 Reserved, must be 0
4667 * 02 NF, Number of Frames: 1=multi-frame
4668 * 01 CNTE, Frame End IRQ Counter enable: 0=disabled
4669 * 00 Reserved, must be 0
4670 *
4671 * 0001 0100
4672 */
4673 write_reg(info, TXDMA + DMR, 0x14);
4674 write_reg(info, RXDMA + DMR, 0x14);
4675
4676 /* Set chain pointer base (upper 8 bits of 24 bit addr) */
4677 write_reg(info, RXDMA + CPB,
4678 (unsigned char)(info->buffer_list_phys >> 16));
4679
4680 /* Set chain pointer base (upper 8 bits of 24 bit addr) */
4681 write_reg(info, TXDMA + CPB,
4682 (unsigned char)(info->buffer_list_phys >> 16));
4683
4684 /* enable status interrupts. other code enables/disables
4685 * the individual sources for these two interrupt classes.
4686 */
4687 info->ie0_value |= TXINTE + RXINTE;
4688 write_reg(info, IE0, info->ie0_value);
4689
4690 /* CTL, MSCI control register
4691 *
4692 * 07..06 Reserved, set to 0
4693 * 05 UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC)
4694 * 04 IDLC, idle control, 0=mark 1=idle register
4695 * 03 BRK, break, 0=off 1 =on (async)
4696 * 02 SYNCLD, sync char load enable (BSC) 1=enabled
4697 * 01 GOP, go active on poll (LOOP mode) 1=enabled
4698 * 00 RTS, RTS output control, 0=active 1=inactive
4699 *
4700 * 0001 0001
4701 */
4702 RegValue = 0x10;
4703 if (!(info->serial_signals & SerialSignal_RTS))
4704 RegValue |= 0x01;
4705 write_reg(info, CTL, RegValue);
4706
4707 /* preamble not supported ! */
4708
4709 tx_set_idle(info);
4710 tx_stop(info);
4711 rx_stop(info);
4712
4713 set_rate(info, info->params.clock_speed);
4714
4715 if (info->params.loopback)
4716 enable_loopback(info,1);
4717 }
4718
4719 /* Set the transmit HDLC idle mode
4720 */
4721 static void tx_set_idle(SLMP_INFO *info)
4722 {
4723 unsigned char RegValue = 0xff;
4724
4725 /* Map API idle mode to SCA register bits */
4726 switch(info->idle_mode) {
4727 case HDLC_TXIDLE_FLAGS: RegValue = 0x7e; break;
4728 case HDLC_TXIDLE_ALT_ZEROS_ONES: RegValue = 0xaa; break;
4729 case HDLC_TXIDLE_ZEROS: RegValue = 0x00; break;
4730 case HDLC_TXIDLE_ONES: RegValue = 0xff; break;
4731 case HDLC_TXIDLE_ALT_MARK_SPACE: RegValue = 0xaa; break;
4732 case HDLC_TXIDLE_SPACE: RegValue = 0x00; break;
4733 case HDLC_TXIDLE_MARK: RegValue = 0xff; break;
4734 }
4735
4736 write_reg(info, IDL, RegValue);
4737 }
4738
4739 /* Query the adapter for the state of the V24 status (input) signals.
4740 */
4741 static void get_signals(SLMP_INFO *info)
4742 {
4743 u16 status = read_reg(info, SR3);
4744 u16 gpstatus = read_status_reg(info);
4745 u16 testbit;
4746
4747 /* clear all serial signals except DTR and RTS */
4748 info->serial_signals &= SerialSignal_DTR + SerialSignal_RTS;
4749
4750 /* set serial signal bits to reflect MISR */
4751
4752 if (!(status & BIT3))
4753 info->serial_signals |= SerialSignal_CTS;
4754
4755 if ( !(status & BIT2))
4756 info->serial_signals |= SerialSignal_DCD;
4757
4758 testbit = BIT1 << (info->port_num * 2); // Port 0..3 RI is GPDATA<1,3,5,7>
4759 if (!(gpstatus & testbit))
4760 info->serial_signals |= SerialSignal_RI;
4761
4762 testbit = BIT0 << (info->port_num * 2); // Port 0..3 DSR is GPDATA<0,2,4,6>
4763 if (!(gpstatus & testbit))
4764 info->serial_signals |= SerialSignal_DSR;
4765 }
4766
4767 /* Set the state of DTR and RTS based on contents of
4768 * serial_signals member of device context.
4769 */
4770 static void set_signals(SLMP_INFO *info)
4771 {
4772 unsigned char RegValue;
4773 u16 EnableBit;
4774
4775 RegValue = read_reg(info, CTL);
4776 if (info->serial_signals & SerialSignal_RTS)
4777 RegValue &= ~BIT0;
4778 else
4779 RegValue |= BIT0;
4780 write_reg(info, CTL, RegValue);
4781
4782 // Port 0..3 DTR is ctrl reg <1,3,5,7>
4783 EnableBit = BIT1 << (info->port_num*2);
4784 if (info->serial_signals & SerialSignal_DTR)
4785 info->port_array[0]->ctrlreg_value &= ~EnableBit;
4786 else
4787 info->port_array[0]->ctrlreg_value |= EnableBit;
4788 write_control_reg(info);
4789 }
4790
4791 /*******************/
4792 /* DMA Buffer Code */
4793 /*******************/
4794
4795 /* Set the count for all receive buffers to SCABUFSIZE
4796 * and set the current buffer to the first buffer. This effectively
4797 * makes all buffers free and discards any data in buffers.
4798 */
4799 static void rx_reset_buffers(SLMP_INFO *info)
4800 {
4801 rx_free_frame_buffers(info, 0, info->rx_buf_count - 1);
4802 }
4803
4804 /* Free the buffers used by a received frame
4805 *
4806 * info pointer to device instance data
4807 * first index of 1st receive buffer of frame
4808 * last index of last receive buffer of frame
4809 */
4810 static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last)
4811 {
4812 bool done = false;
4813
4814 while(!done) {
4815 /* reset current buffer for reuse */
4816 info->rx_buf_list[first].status = 0xff;
4817
4818 if (first == last) {
4819 done = true;
4820 /* set new last rx descriptor address */
4821 write_reg16(info, RXDMA + EDA, info->rx_buf_list_ex[first].phys_entry);
4822 }
4823
4824 first++;
4825 if (first == info->rx_buf_count)
4826 first = 0;
4827 }
4828
4829 /* set current buffer to next buffer after last buffer of frame */
4830 info->current_rx_buf = first;
4831 }
4832
4833 /* Return a received frame from the receive DMA buffers.
4834 * Only frames received without errors are returned.
4835 *
4836 * Return Value: true if frame returned, otherwise false
4837 */
4838 static bool rx_get_frame(SLMP_INFO *info)
4839 {
4840 unsigned int StartIndex, EndIndex; /* index of 1st and last buffers of Rx frame */
4841 unsigned short status;
4842 unsigned int framesize = 0;
4843 bool ReturnCode = false;
4844 unsigned long flags;
4845 struct tty_struct *tty = info->port.tty;
4846 unsigned char addr_field = 0xff;
4847 SCADESC *desc;
4848 SCADESC_EX *desc_ex;
4849
4850 CheckAgain:
4851 /* assume no frame returned, set zero length */
4852 framesize = 0;
4853 addr_field = 0xff;
4854
4855 /*
4856 * current_rx_buf points to the 1st buffer of the next available
4857 * receive frame. To find the last buffer of the frame look for
4858 * a non-zero status field in the buffer entries. (The status
4859 * field is set by the 16C32 after completing a receive frame.
4860 */
4861 StartIndex = EndIndex = info->current_rx_buf;
4862
4863 for ( ;; ) {
4864 desc = &info->rx_buf_list[EndIndex];
4865 desc_ex = &info->rx_buf_list_ex[EndIndex];
4866
4867 if (desc->status == 0xff)
4868 goto Cleanup; /* current desc still in use, no frames available */
4869
4870 if (framesize == 0 && info->params.addr_filter != 0xff)
4871 addr_field = desc_ex->virt_addr[0];
4872
4873 framesize += desc->length;
4874
4875 /* Status != 0 means last buffer of frame */
4876 if (desc->status)
4877 break;
4878
4879 EndIndex++;
4880 if (EndIndex == info->rx_buf_count)
4881 EndIndex = 0;
4882
4883 if (EndIndex == info->current_rx_buf) {
4884 /* all buffers have been 'used' but none mark */
4885 /* the end of a frame. Reset buffers and receiver. */
4886 if ( info->rx_enabled ){
4887 spin_lock_irqsave(&info->lock,flags);
4888 rx_start(info);
4889 spin_unlock_irqrestore(&info->lock,flags);
4890 }
4891 goto Cleanup;
4892 }
4893
4894 }
4895
4896 /* check status of receive frame */
4897
4898 /* frame status is byte stored after frame data
4899 *
4900 * 7 EOM (end of msg), 1 = last buffer of frame
4901 * 6 Short Frame, 1 = short frame
4902 * 5 Abort, 1 = frame aborted
4903 * 4 Residue, 1 = last byte is partial
4904 * 3 Overrun, 1 = overrun occurred during frame reception
4905 * 2 CRC, 1 = CRC error detected
4906 *
4907 */
4908 status = desc->status;
4909
4910 /* ignore CRC bit if not using CRC (bit is undefined) */
4911 /* Note:CRC is not save to data buffer */
4912 if (info->params.crc_type == HDLC_CRC_NONE)
4913 status &= ~BIT2;
4914
4915 if (framesize == 0 ||
4916 (addr_field != 0xff && addr_field != info->params.addr_filter)) {
4917 /* discard 0 byte frames, this seems to occur sometime
4918 * when remote is idling flags.
4919 */
4920 rx_free_frame_buffers(info, StartIndex, EndIndex);
4921 goto CheckAgain;
4922 }
4923
4924 if (framesize < 2)
4925 status |= BIT6;
4926
4927 if (status & (BIT6+BIT5+BIT3+BIT2)) {
4928 /* received frame has errors,
4929 * update counts and mark frame size as 0
4930 */
4931 if (status & BIT6)
4932 info->icount.rxshort++;
4933 else if (status & BIT5)
4934 info->icount.rxabort++;
4935 else if (status & BIT3)
4936 info->icount.rxover++;
4937 else
4938 info->icount.rxcrc++;
4939
4940 framesize = 0;
4941 #if SYNCLINK_GENERIC_HDLC
4942 {
4943 info->netdev->stats.rx_errors++;
4944 info->netdev->stats.rx_frame_errors++;
4945 }
4946 #endif
4947 }
4948
4949 if ( debug_level >= DEBUG_LEVEL_BH )
4950 printk("%s(%d):%s rx_get_frame() status=%04X size=%d\n",
4951 __FILE__,__LINE__,info->device_name,status,framesize);
4952
4953 if ( debug_level >= DEBUG_LEVEL_DATA )
4954 trace_block(info,info->rx_buf_list_ex[StartIndex].virt_addr,
4955 min_t(int, framesize,SCABUFSIZE),0);
4956
4957 if (framesize) {
4958 if (framesize > info->max_frame_size)
4959 info->icount.rxlong++;
4960 else {
4961 /* copy dma buffer(s) to contiguous intermediate buffer */
4962 int copy_count = framesize;
4963 int index = StartIndex;
4964 unsigned char *ptmp = info->tmp_rx_buf;
4965 info->tmp_rx_buf_count = framesize;
4966
4967 info->icount.rxok++;
4968
4969 while(copy_count) {
4970 int partial_count = min(copy_count,SCABUFSIZE);
4971 memcpy( ptmp,
4972 info->rx_buf_list_ex[index].virt_addr,
4973 partial_count );
4974 ptmp += partial_count;
4975 copy_count -= partial_count;
4976
4977 if ( ++index == info->rx_buf_count )
4978 index = 0;
4979 }
4980
4981 #if SYNCLINK_GENERIC_HDLC
4982 if (info->netcount)
4983 hdlcdev_rx(info,info->tmp_rx_buf,framesize);
4984 else
4985 #endif
4986 ldisc_receive_buf(tty,info->tmp_rx_buf,
4987 info->flag_buf, framesize);
4988 }
4989 }
4990 /* Free the buffers used by this frame. */
4991 rx_free_frame_buffers( info, StartIndex, EndIndex );
4992
4993 ReturnCode = true;
4994
4995 Cleanup:
4996 if ( info->rx_enabled && info->rx_overflow ) {
4997 /* Receiver is enabled, but needs to restarted due to
4998 * rx buffer overflow. If buffers are empty, restart receiver.
4999 */
5000 if (info->rx_buf_list[EndIndex].status == 0xff) {
5001 spin_lock_irqsave(&info->lock,flags);
5002 rx_start(info);
5003 spin_unlock_irqrestore(&info->lock,flags);
5004 }
5005 }
5006
5007 return ReturnCode;
5008 }
5009
5010 /* load the transmit DMA buffer with data
5011 */
5012 static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count)
5013 {
5014 unsigned short copy_count;
5015 unsigned int i = 0;
5016 SCADESC *desc;
5017 SCADESC_EX *desc_ex;
5018
5019 if ( debug_level >= DEBUG_LEVEL_DATA )
5020 trace_block(info,buf, min_t(int, count,SCABUFSIZE), 1);
5021
5022 /* Copy source buffer to one or more DMA buffers, starting with
5023 * the first transmit dma buffer.
5024 */
5025 for(i=0;;)
5026 {
5027 copy_count = min_t(unsigned short,count,SCABUFSIZE);
5028
5029 desc = &info->tx_buf_list[i];
5030 desc_ex = &info->tx_buf_list_ex[i];
5031
5032 load_pci_memory(info, desc_ex->virt_addr,buf,copy_count);
5033
5034 desc->length = copy_count;
5035 desc->status = 0;
5036
5037 buf += copy_count;
5038 count -= copy_count;
5039
5040 if (!count)
5041 break;
5042
5043 i++;
5044 if (i >= info->tx_buf_count)
5045 i = 0;
5046 }
5047
5048 info->tx_buf_list[i].status = 0x81; /* set EOM and EOT status */
5049 info->last_tx_buf = ++i;
5050 }
5051
5052 static bool register_test(SLMP_INFO *info)
5053 {
5054 static unsigned char testval[] = {0x00, 0xff, 0xaa, 0x55, 0x69, 0x96};
5055 static unsigned int count = ARRAY_SIZE(testval);
5056 unsigned int i;
5057 bool rc = true;
5058 unsigned long flags;
5059
5060 spin_lock_irqsave(&info->lock,flags);
5061 reset_port(info);
5062
5063 /* assume failure */
5064 info->init_error = DiagStatus_AddressFailure;
5065
5066 /* Write bit patterns to various registers but do it out of */
5067 /* sync, then read back and verify values. */
5068
5069 for (i = 0 ; i < count ; i++) {
5070 write_reg(info, TMC, testval[i]);
5071 write_reg(info, IDL, testval[(i+1)%count]);
5072 write_reg(info, SA0, testval[(i+2)%count]);
5073 write_reg(info, SA1, testval[(i+3)%count]);
5074
5075 if ( (read_reg(info, TMC) != testval[i]) ||
5076 (read_reg(info, IDL) != testval[(i+1)%count]) ||
5077 (read_reg(info, SA0) != testval[(i+2)%count]) ||
5078 (read_reg(info, SA1) != testval[(i+3)%count]) )
5079 {
5080 rc = false;
5081 break;
5082 }
5083 }
5084
5085 reset_port(info);
5086 spin_unlock_irqrestore(&info->lock,flags);
5087
5088 return rc;
5089 }
5090
5091 static bool irq_test(SLMP_INFO *info)
5092 {
5093 unsigned long timeout;
5094 unsigned long flags;
5095
5096 unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0;
5097
5098 spin_lock_irqsave(&info->lock,flags);
5099 reset_port(info);
5100
5101 /* assume failure */
5102 info->init_error = DiagStatus_IrqFailure;
5103 info->irq_occurred = false;
5104
5105 /* setup timer0 on SCA0 to interrupt */
5106
5107 /* IER2<7..4> = timer<3..0> interrupt enables (1=enabled) */
5108 write_reg(info, IER2, (unsigned char)((info->port_num & 1) ? BIT6 : BIT4));
5109
5110 write_reg(info, (unsigned char)(timer + TEPR), 0); /* timer expand prescale */
5111 write_reg16(info, (unsigned char)(timer + TCONR), 1); /* timer constant */
5112
5113
5114 /* TMCS, Timer Control/Status Register
5115 *
5116 * 07 CMF, Compare match flag (read only) 1=match
5117 * 06 ECMI, CMF Interrupt Enable: 1=enabled
5118 * 05 Reserved, must be 0
5119 * 04 TME, Timer Enable
5120 * 03..00 Reserved, must be 0
5121 *
5122 * 0101 0000
5123 */
5124 write_reg(info, (unsigned char)(timer + TMCS), 0x50);
5125
5126 spin_unlock_irqrestore(&info->lock,flags);
5127
5128 timeout=100;
5129 while( timeout-- && !info->irq_occurred ) {
5130 msleep_interruptible(10);
5131 }
5132
5133 spin_lock_irqsave(&info->lock,flags);
5134 reset_port(info);
5135 spin_unlock_irqrestore(&info->lock,flags);
5136
5137 return info->irq_occurred;
5138 }
5139
5140 /* initialize individual SCA device (2 ports)
5141 */
5142 static bool sca_init(SLMP_INFO *info)
5143 {
5144 /* set wait controller to single mem partition (low), no wait states */
5145 write_reg(info, PABR0, 0); /* wait controller addr boundary 0 */
5146 write_reg(info, PABR1, 0); /* wait controller addr boundary 1 */
5147 write_reg(info, WCRL, 0); /* wait controller low range */
5148 write_reg(info, WCRM, 0); /* wait controller mid range */
5149 write_reg(info, WCRH, 0); /* wait controller high range */
5150
5151 /* DPCR, DMA Priority Control
5152 *
5153 * 07..05 Not used, must be 0
5154 * 04 BRC, bus release condition: 0=all transfers complete
5155 * 03 CCC, channel change condition: 0=every cycle
5156 * 02..00 PR<2..0>, priority 100=round robin
5157 *
5158 * 00000100 = 0x04
5159 */
5160 write_reg(info, DPCR, dma_priority);
5161
5162 /* DMA Master Enable, BIT7: 1=enable all channels */
5163 write_reg(info, DMER, 0x80);
5164
5165 /* enable all interrupt classes */
5166 write_reg(info, IER0, 0xff); /* TxRDY,RxRDY,TxINT,RxINT (ports 0-1) */
5167 write_reg(info, IER1, 0xff); /* DMIB,DMIA (channels 0-3) */
5168 write_reg(info, IER2, 0xf0); /* TIRQ (timers 0-3) */
5169
5170 /* ITCR, interrupt control register
5171 * 07 IPC, interrupt priority, 0=MSCI->DMA
5172 * 06..05 IAK<1..0>, Acknowledge cycle, 00=non-ack cycle
5173 * 04 VOS, Vector Output, 0=unmodified vector
5174 * 03..00 Reserved, must be 0
5175 */
5176 write_reg(info, ITCR, 0);
5177
5178 return true;
5179 }
5180
5181 /* initialize adapter hardware
5182 */
5183 static bool init_adapter(SLMP_INFO *info)
5184 {
5185 int i;
5186
5187 /* Set BIT30 of Local Control Reg 0x50 to reset SCA */
5188 volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50);
5189 u32 readval;
5190
5191 info->misc_ctrl_value |= BIT30;
5192 *MiscCtrl = info->misc_ctrl_value;
5193
5194 /*
5195 * Force at least 170ns delay before clearing
5196 * reset bit. Each read from LCR takes at least
5197 * 30ns so 10 times for 300ns to be safe.
5198 */
5199 for(i=0;i<10;i++)
5200 readval = *MiscCtrl;
5201
5202 info->misc_ctrl_value &= ~BIT30;
5203 *MiscCtrl = info->misc_ctrl_value;
5204
5205 /* init control reg (all DTRs off, all clksel=input) */
5206 info->ctrlreg_value = 0xaa;
5207 write_control_reg(info);
5208
5209 {
5210 volatile u32 *LCR1BRDR = (u32 *)(info->lcr_base + 0x2c);
5211 lcr1_brdr_value &= ~(BIT5 + BIT4 + BIT3);
5212
5213 switch(read_ahead_count)
5214 {
5215 case 16:
5216 lcr1_brdr_value |= BIT5 + BIT4 + BIT3;
5217 break;
5218 case 8:
5219 lcr1_brdr_value |= BIT5 + BIT4;
5220 break;
5221 case 4:
5222 lcr1_brdr_value |= BIT5 + BIT3;
5223 break;
5224 case 0:
5225 lcr1_brdr_value |= BIT5;
5226 break;
5227 }
5228
5229 *LCR1BRDR = lcr1_brdr_value;
5230 *MiscCtrl = misc_ctrl_value;
5231 }
5232
5233 sca_init(info->port_array[0]);
5234 sca_init(info->port_array[2]);
5235
5236 return true;
5237 }
5238
5239 /* Loopback an HDLC frame to test the hardware
5240 * interrupt and DMA functions.
5241 */
5242 static bool loopback_test(SLMP_INFO *info)
5243 {
5244 #define TESTFRAMESIZE 20
5245
5246 unsigned long timeout;
5247 u16 count = TESTFRAMESIZE;
5248 unsigned char buf[TESTFRAMESIZE];
5249 bool rc = false;
5250 unsigned long flags;
5251
5252 struct tty_struct *oldtty = info->port.tty;
5253 u32 speed = info->params.clock_speed;
5254
5255 info->params.clock_speed = 3686400;
5256 info->port.tty = NULL;
5257
5258 /* assume failure */
5259 info->init_error = DiagStatus_DmaFailure;
5260
5261 /* build and send transmit frame */
5262 for (count = 0; count < TESTFRAMESIZE;++count)
5263 buf[count] = (unsigned char)count;
5264
5265 memset(info->tmp_rx_buf,0,TESTFRAMESIZE);
5266
5267 /* program hardware for HDLC and enabled receiver */
5268 spin_lock_irqsave(&info->lock,flags);
5269 hdlc_mode(info);
5270 enable_loopback(info,1);
5271 rx_start(info);
5272 info->tx_count = count;
5273 tx_load_dma_buffer(info,buf,count);
5274 tx_start(info);
5275 spin_unlock_irqrestore(&info->lock,flags);
5276
5277 /* wait for receive complete */
5278 /* Set a timeout for waiting for interrupt. */
5279 for ( timeout = 100; timeout; --timeout ) {
5280 msleep_interruptible(10);
5281
5282 if (rx_get_frame(info)) {
5283 rc = true;
5284 break;
5285 }
5286 }
5287
5288 /* verify received frame length and contents */
5289 if (rc &&
5290 ( info->tmp_rx_buf_count != count ||
5291 memcmp(buf, info->tmp_rx_buf,count))) {
5292 rc = false;
5293 }
5294
5295 spin_lock_irqsave(&info->lock,flags);
5296 reset_adapter(info);
5297 spin_unlock_irqrestore(&info->lock,flags);
5298
5299 info->params.clock_speed = speed;
5300 info->port.tty = oldtty;
5301
5302 return rc;
5303 }
5304
5305 /* Perform diagnostics on hardware
5306 */
5307 static int adapter_test( SLMP_INFO *info )
5308 {
5309 unsigned long flags;
5310 if ( debug_level >= DEBUG_LEVEL_INFO )
5311 printk( "%s(%d):Testing device %s\n",
5312 __FILE__,__LINE__,info->device_name );
5313
5314 spin_lock_irqsave(&info->lock,flags);
5315 init_adapter(info);
5316 spin_unlock_irqrestore(&info->lock,flags);
5317
5318 info->port_array[0]->port_count = 0;
5319
5320 if ( register_test(info->port_array[0]) &&
5321 register_test(info->port_array[1])) {
5322
5323 info->port_array[0]->port_count = 2;
5324
5325 if ( register_test(info->port_array[2]) &&
5326 register_test(info->port_array[3]) )
5327 info->port_array[0]->port_count += 2;
5328 }
5329 else {
5330 printk( "%s(%d):Register test failure for device %s Addr=%08lX\n",
5331 __FILE__,__LINE__,info->device_name, (unsigned long)(info->phys_sca_base));
5332 return -ENODEV;
5333 }
5334
5335 if ( !irq_test(info->port_array[0]) ||
5336 !irq_test(info->port_array[1]) ||
5337 (info->port_count == 4 && !irq_test(info->port_array[2])) ||
5338 (info->port_count == 4 && !irq_test(info->port_array[3]))) {
5339 printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n",
5340 __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) );
5341 return -ENODEV;
5342 }
5343
5344 if (!loopback_test(info->port_array[0]) ||
5345 !loopback_test(info->port_array[1]) ||
5346 (info->port_count == 4 && !loopback_test(info->port_array[2])) ||
5347 (info->port_count == 4 && !loopback_test(info->port_array[3]))) {
5348 printk( "%s(%d):DMA test failure for device %s\n",
5349 __FILE__,__LINE__,info->device_name);
5350 return -ENODEV;
5351 }
5352
5353 if ( debug_level >= DEBUG_LEVEL_INFO )
5354 printk( "%s(%d):device %s passed diagnostics\n",
5355 __FILE__,__LINE__,info->device_name );
5356
5357 info->port_array[0]->init_error = 0;
5358 info->port_array[1]->init_error = 0;
5359 if ( info->port_count > 2 ) {
5360 info->port_array[2]->init_error = 0;
5361 info->port_array[3]->init_error = 0;
5362 }
5363
5364 return 0;
5365 }
5366
5367 /* Test the shared memory on a PCI adapter.
5368 */
5369 static bool memory_test(SLMP_INFO *info)
5370 {
5371 static unsigned long testval[] = { 0x0, 0x55555555, 0xaaaaaaaa,
5372 0x66666666, 0x99999999, 0xffffffff, 0x12345678 };
5373 unsigned long count = ARRAY_SIZE(testval);
5374 unsigned long i;
5375 unsigned long limit = SCA_MEM_SIZE/sizeof(unsigned long);
5376 unsigned long * addr = (unsigned long *)info->memory_base;
5377
5378 /* Test data lines with test pattern at one location. */
5379
5380 for ( i = 0 ; i < count ; i++ ) {
5381 *addr = testval[i];
5382 if ( *addr != testval[i] )
5383 return false;
5384 }
5385
5386 /* Test address lines with incrementing pattern over */
5387 /* entire address range. */
5388
5389 for ( i = 0 ; i < limit ; i++ ) {
5390 *addr = i * 4;
5391 addr++;
5392 }
5393
5394 addr = (unsigned long *)info->memory_base;
5395
5396 for ( i = 0 ; i < limit ; i++ ) {
5397 if ( *addr != i * 4 )
5398 return false;
5399 addr++;
5400 }
5401
5402 memset( info->memory_base, 0, SCA_MEM_SIZE );
5403 return true;
5404 }
5405
5406 /* Load data into PCI adapter shared memory.
5407 *
5408 * The PCI9050 releases control of the local bus
5409 * after completing the current read or write operation.
5410 *
5411 * While the PCI9050 write FIFO not empty, the
5412 * PCI9050 treats all of the writes as a single transaction
5413 * and does not release the bus. This causes DMA latency problems
5414 * at high speeds when copying large data blocks to the shared memory.
5415 *
5416 * This function breaks a write into multiple transations by
5417 * interleaving a read which flushes the write FIFO and 'completes'
5418 * the write transation. This allows any pending DMA request to gain control
5419 * of the local bus in a timely fasion.
5420 */
5421 static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count)
5422 {
5423 /* A load interval of 16 allows for 4 32-bit writes at */
5424 /* 136ns each for a maximum latency of 542ns on the local bus.*/
5425
5426 unsigned short interval = count / sca_pci_load_interval;
5427 unsigned short i;
5428
5429 for ( i = 0 ; i < interval ; i++ )
5430 {
5431 memcpy(dest, src, sca_pci_load_interval);
5432 read_status_reg(info);
5433 dest += sca_pci_load_interval;
5434 src += sca_pci_load_interval;
5435 }
5436
5437 memcpy(dest, src, count % sca_pci_load_interval);
5438 }
5439
5440 static void trace_block(SLMP_INFO *info,const char* data, int count, int xmit)
5441 {
5442 int i;
5443 int linecount;
5444 if (xmit)
5445 printk("%s tx data:\n",info->device_name);
5446 else
5447 printk("%s rx data:\n",info->device_name);
5448
5449 while(count) {
5450 if (count > 16)
5451 linecount = 16;
5452 else
5453 linecount = count;
5454
5455 for(i=0;i<linecount;i++)
5456 printk("%02X ",(unsigned char)data[i]);
5457 for(;i<17;i++)
5458 printk(" ");
5459 for(i=0;i<linecount;i++) {
5460 if (data[i]>=040 && data[i]<=0176)
5461 printk("%c",data[i]);
5462 else
5463 printk(".");
5464 }
5465 printk("\n");
5466
5467 data += linecount;
5468 count -= linecount;
5469 }
5470 } /* end of trace_block() */
5471
5472 /* called when HDLC frame times out
5473 * update stats and do tx completion processing
5474 */
5475 static void tx_timeout(unsigned long context)
5476 {
5477 SLMP_INFO *info = (SLMP_INFO*)context;
5478 unsigned long flags;
5479
5480 if ( debug_level >= DEBUG_LEVEL_INFO )
5481 printk( "%s(%d):%s tx_timeout()\n",
5482 __FILE__,__LINE__,info->device_name);
5483 if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) {
5484 info->icount.txtimeout++;
5485 }
5486 spin_lock_irqsave(&info->lock,flags);
5487 info->tx_active = false;
5488 info->tx_count = info->tx_put = info->tx_get = 0;
5489
5490 spin_unlock_irqrestore(&info->lock,flags);
5491
5492 #if SYNCLINK_GENERIC_HDLC
5493 if (info->netcount)
5494 hdlcdev_tx_done(info);
5495 else
5496 #endif
5497 bh_transmit(info);
5498 }
5499
5500 /* called to periodically check the DSR/RI modem signal input status
5501 */
5502 static void status_timeout(unsigned long context)
5503 {
5504 u16 status = 0;
5505 SLMP_INFO *info = (SLMP_INFO*)context;
5506 unsigned long flags;
5507 unsigned char delta;
5508
5509
5510 spin_lock_irqsave(&info->lock,flags);
5511 get_signals(info);
5512 spin_unlock_irqrestore(&info->lock,flags);
5513
5514 /* check for DSR/RI state change */
5515
5516 delta = info->old_signals ^ info->serial_signals;
5517 info->old_signals = info->serial_signals;
5518
5519 if (delta & SerialSignal_DSR)
5520 status |= MISCSTATUS_DSR_LATCHED|(info->serial_signals&SerialSignal_DSR);
5521
5522 if (delta & SerialSignal_RI)
5523 status |= MISCSTATUS_RI_LATCHED|(info->serial_signals&SerialSignal_RI);
5524
5525 if (delta & SerialSignal_DCD)
5526 status |= MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD);
5527
5528 if (delta & SerialSignal_CTS)
5529 status |= MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS);
5530
5531 if (status)
5532 isr_io_pin(info,status);
5533
5534 mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10));
5535 }
5536
5537
5538 /* Register Access Routines -
5539 * All registers are memory mapped
5540 */
5541 #define CALC_REGADDR() \
5542 unsigned char * RegAddr = (unsigned char*)(info->sca_base + Addr); \
5543 if (info->port_num > 1) \
5544 RegAddr += 256; /* port 0-1 SCA0, 2-3 SCA1 */ \
5545 if ( info->port_num & 1) { \
5546 if (Addr > 0x7f) \
5547 RegAddr += 0x40; /* DMA access */ \
5548 else if (Addr > 0x1f && Addr < 0x60) \
5549 RegAddr += 0x20; /* MSCI access */ \
5550 }
5551
5552
5553 static unsigned char read_reg(SLMP_INFO * info, unsigned char Addr)
5554 {
5555 CALC_REGADDR();
5556 return *RegAddr;
5557 }
5558 static void write_reg(SLMP_INFO * info, unsigned char Addr, unsigned char Value)
5559 {
5560 CALC_REGADDR();
5561 *RegAddr = Value;
5562 }
5563
5564 static u16 read_reg16(SLMP_INFO * info, unsigned char Addr)
5565 {
5566 CALC_REGADDR();
5567 return *((u16 *)RegAddr);
5568 }
5569
5570 static void write_reg16(SLMP_INFO * info, unsigned char Addr, u16 Value)
5571 {
5572 CALC_REGADDR();
5573 *((u16 *)RegAddr) = Value;
5574 }
5575
5576 static unsigned char read_status_reg(SLMP_INFO * info)
5577 {
5578 unsigned char *RegAddr = (unsigned char *)info->statctrl_base;
5579 return *RegAddr;
5580 }
5581
5582 static void write_control_reg(SLMP_INFO * info)
5583 {
5584 unsigned char *RegAddr = (unsigned char *)info->statctrl_base;
5585 *RegAddr = info->port_array[0]->ctrlreg_value;
5586 }
5587
5588
5589 static int __devinit synclinkmp_init_one (struct pci_dev *dev,
5590 const struct pci_device_id *ent)
5591 {
5592 if (pci_enable_device(dev)) {
5593 printk("error enabling pci device %p\n", dev);
5594 return -EIO;
5595 }
5596 device_init( ++synclinkmp_adapter_count, dev );
5597 return 0;
5598 }
5599
5600 static void __devexit synclinkmp_remove_one (struct pci_dev *dev)
5601 {
5602 }
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree