?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
ALSA: ymfpci: use enum control info helper
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / serial / bfin_sport_uart.c
blobe95c524d9d18839f552c03cf1ba060de0b84631e
1 /*
2 * Blackfin On-Chip Sport Emulated UART Driver
3 *
4 * Copyright 2006-2009 Analog Devices Inc.
5 *
6 * Enter bugs at http://blackfin.uclinux.org/
7 *
8 * Licensed under the GPL-2 or later.
9 */
10
11 /*
12 * This driver and the hardware supported are in term of EE-191 of ADI.
13 * http://www.analog.com/static/imported-files/application_notes/EE191.pdf
14 * This application note describe how to implement a UART on a Sharc DSP,
15 * but this driver is implemented on Blackfin Processor.
16 * Transmit Frame Sync is not used by this driver to transfer data out.
17 */
18
19 /* #define DEBUG */
20
21 #define DRV_NAME "bfin-sport-uart"
22 #define DEVICE_NAME "ttySS"
23 #define pr_fmt(fmt) DRV_NAME ": " fmt
24
25 #include <linux/module.h>
26 #include <linux/ioport.h>
27 #include <linux/io.h>
28 #include <linux/init.h>
29 #include <linux/console.h>
30 #include <linux/sysrq.h>
31 #include <linux/slab.h>
32 #include <linux/platform_device.h>
33 #include <linux/tty.h>
34 #include <linux/tty_flip.h>
35 #include <linux/serial_core.h>
36
37 #include <asm/bfin_sport.h>
38 #include <asm/delay.h>
39 #include <asm/portmux.h>
40
41 #include "bfin_sport_uart.h"
42
43 struct sport_uart_port {
44 struct uart_port port;
45 int err_irq;
46 unsigned short csize;
47 unsigned short rxmask;
48 unsigned short txmask1;
49 unsigned short txmask2;
50 unsigned char stopb;
51 /* unsigned char parib; */
52 #ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS
53 int cts_pin;
54 int rts_pin;
55 #endif
56 };
57
58 static int sport_uart_tx_chars(struct sport_uart_port *up);
59 static void sport_stop_tx(struct uart_port *port);
60
61 static inline void tx_one_byte(struct sport_uart_port *up, unsigned int value)
62 {
63 pr_debug("%s value:%x, mask1=0x%x, mask2=0x%x\n", __func__, value,
64 up->txmask1, up->txmask2);
65
66 /* Place Start and Stop bits */
67 __asm__ __volatile__ (
68 "%[val] <<= 1;"
69 "%[val] = %[val] & %[mask1];"
70 "%[val] = %[val] | %[mask2];"
71 : [val]"+d"(value)
72 : [mask1]"d"(up->txmask1), [mask2]"d"(up->txmask2)
73 : "ASTAT"
74 );
75 pr_debug("%s value:%x\n", __func__, value);
76
77 SPORT_PUT_TX(up, value);
78 }
79
80 static inline unsigned char rx_one_byte(struct sport_uart_port *up)
81 {
82 unsigned int value;
83 unsigned char extract;
84 u32 tmp_mask1, tmp_mask2, tmp_shift, tmp;
85
86 if ((up->csize + up->stopb) > 7)
87 value = SPORT_GET_RX32(up);
88 else
89 value = SPORT_GET_RX(up);
90
91 pr_debug("%s value:%x, cs=%d, mask=0x%x\n", __func__, value,
92 up->csize, up->rxmask);
93
94 /* Extract data */
95 __asm__ __volatile__ (
96 "%[extr] = 0;"
97 "%[mask1] = %[rxmask];"
98 "%[mask2] = 0x0200(Z);"
99 "%[shift] = 0;"
100 "LSETUP(.Lloop_s, .Lloop_e) LC0 = %[lc];"
101 ".Lloop_s:"
102 "%[tmp] = extract(%[val], %[mask1].L)(Z);"
103 "%[tmp] <<= %[shift];"
104 "%[extr] = %[extr] | %[tmp];"
105 "%[mask1] = %[mask1] - %[mask2];"
106 ".Lloop_e:"
107 "%[shift] += 1;"
108 : [extr]"=&d"(extract), [shift]"=&d"(tmp_shift), [tmp]"=&d"(tmp),
109 [mask1]"=&d"(tmp_mask1), [mask2]"=&d"(tmp_mask2)
110 : [val]"d"(value), [rxmask]"d"(up->rxmask), [lc]"a"(up->csize)
111 : "ASTAT", "LB0", "LC0", "LT0"
112 );
113
114 pr_debug(" extract:%x\n", extract);
115 return extract;
116 }
117
118 static int sport_uart_setup(struct sport_uart_port *up, int size, int baud_rate)
119 {
120 int tclkdiv, rclkdiv;
121 unsigned int sclk = get_sclk();
122
123 /* Set TCR1 and TCR2, TFSR is not enabled for uart */
124 SPORT_PUT_TCR1(up, (LATFS | ITFS | TFSR | TLSBIT | ITCLK));
125 SPORT_PUT_TCR2(up, size + 1);
126 pr_debug("%s TCR1:%x, TCR2:%x\n", __func__, SPORT_GET_TCR1(up), SPORT_GET_TCR2(up));
127
128 /* Set RCR1 and RCR2 */
129 SPORT_PUT_RCR1(up, (RCKFE | LARFS | LRFS | RFSR | IRCLK));
130 SPORT_PUT_RCR2(up, (size + 1) * 2 - 1);
131 pr_debug("%s RCR1:%x, RCR2:%x\n", __func__, SPORT_GET_RCR1(up), SPORT_GET_RCR2(up));
132
133 tclkdiv = sclk / (2 * baud_rate) - 1;
134 /* The actual uart baud rate of devices vary between +/-2%. The sport
135 * RX sample rate should be faster than the double of the worst case,
136 * otherwise, wrong data are received. So, set sport RX clock to be
137 * 3% faster.
138 */
139 rclkdiv = sclk / (2 * baud_rate * 2 * 97 / 100) - 1;
140 SPORT_PUT_TCLKDIV(up, tclkdiv);
141 SPORT_PUT_RCLKDIV(up, rclkdiv);
142 SSYNC();
143 pr_debug("%s sclk:%d, baud_rate:%d, tclkdiv:%d, rclkdiv:%d\n",
144 __func__, sclk, baud_rate, tclkdiv, rclkdiv);
145
146 return 0;
147 }
148
149 static irqreturn_t sport_uart_rx_irq(int irq, void *dev_id)
150 {
151 struct sport_uart_port *up = dev_id;
152 struct tty_struct *tty = up->port.state->port.tty;
153 unsigned int ch;
154
155 spin_lock(&up->port.lock);
156
157 while (SPORT_GET_STAT(up) & RXNE) {
158 ch = rx_one_byte(up);
159 up->port.icount.rx++;
160
161 if (!uart_handle_sysrq_char(&up->port, ch))
162 tty_insert_flip_char(tty, ch, TTY_NORMAL);
163 }
164 tty_flip_buffer_push(tty);
165
166 spin_unlock(&up->port.lock);
167
168 return IRQ_HANDLED;
169 }
170
171 static irqreturn_t sport_uart_tx_irq(int irq, void *dev_id)
172 {
173 struct sport_uart_port *up = dev_id;
174
175 spin_lock(&up->port.lock);
176 sport_uart_tx_chars(up);
177 spin_unlock(&up->port.lock);
178
179 return IRQ_HANDLED;
180 }
181
182 static irqreturn_t sport_uart_err_irq(int irq, void *dev_id)
183 {
184 struct sport_uart_port *up = dev_id;
185 struct tty_struct *tty = up->port.state->port.tty;
186 unsigned int stat = SPORT_GET_STAT(up);
187
188 spin_lock(&up->port.lock);
189
190 /* Overflow in RX FIFO */
191 if (stat & ROVF) {
192 up->port.icount.overrun++;
193 tty_insert_flip_char(tty, 0, TTY_OVERRUN);
194 SPORT_PUT_STAT(up, ROVF); /* Clear ROVF bit */
195 }
196 /* These should not happen */
197 if (stat & (TOVF | TUVF | RUVF)) {
198 pr_err("SPORT Error:%s %s %s\n",
199 (stat & TOVF) ? "TX overflow" : "",
200 (stat & TUVF) ? "TX underflow" : "",
201 (stat & RUVF) ? "RX underflow" : "");
202 SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN);
203 SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) & ~RSPEN);
204 }
205 SSYNC();
206
207 spin_unlock(&up->port.lock);
208 return IRQ_HANDLED;
209 }
210
211 #ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS
212 static unsigned int sport_get_mctrl(struct uart_port *port)
213 {
214 struct sport_uart_port *up = (struct sport_uart_port *)port;
215 if (up->cts_pin < 0)
216 return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
217
218 /* CTS PIN is negative assertive. */
219 if (SPORT_UART_GET_CTS(up))
220 return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
221 else
222 return TIOCM_DSR | TIOCM_CAR;
223 }
224
225 static void sport_set_mctrl(struct uart_port *port, unsigned int mctrl)
226 {
227 struct sport_uart_port *up = (struct sport_uart_port *)port;
228 if (up->rts_pin < 0)
229 return;
230
231 /* RTS PIN is negative assertive. */
232 if (mctrl & TIOCM_RTS)
233 SPORT_UART_ENABLE_RTS(up);
234 else
235 SPORT_UART_DISABLE_RTS(up);
236 }
237
238 /*
239 * Handle any change of modem status signal.
240 */
241 static irqreturn_t sport_mctrl_cts_int(int irq, void *dev_id)
242 {
243 struct sport_uart_port *up = (struct sport_uart_port *)dev_id;
244 unsigned int status;
245
246 status = sport_get_mctrl(&up->port);
247 uart_handle_cts_change(&up->port, status & TIOCM_CTS);
248
249 return IRQ_HANDLED;
250 }
251 #else
252 static unsigned int sport_get_mctrl(struct uart_port *port)
253 {
254 pr_debug("%s enter\n", __func__);
255 return TIOCM_CTS | TIOCM_CD | TIOCM_DSR;
256 }
257
258 static void sport_set_mctrl(struct uart_port *port, unsigned int mctrl)
259 {
260 pr_debug("%s enter\n", __func__);
261 }
262 #endif
263
264 /* Reqeust IRQ, Setup clock */
265 static int sport_startup(struct uart_port *port)
266 {
267 struct sport_uart_port *up = (struct sport_uart_port *)port;
268 int ret;
269
270 pr_debug("%s enter\n", __func__);
271 ret = request_irq(up->port.irq, sport_uart_rx_irq, 0,
272 "SPORT_UART_RX", up);
273 if (ret) {
274 dev_err(port->dev, "unable to request SPORT RX interrupt\n");
275 return ret;
276 }
277
278 ret = request_irq(up->port.irq+1, sport_uart_tx_irq, 0,
279 "SPORT_UART_TX", up);
280 if (ret) {
281 dev_err(port->dev, "unable to request SPORT TX interrupt\n");
282 goto fail1;
283 }
284
285 ret = request_irq(up->err_irq, sport_uart_err_irq, 0,
286 "SPORT_UART_STATUS", up);
287 if (ret) {
288 dev_err(port->dev, "unable to request SPORT status interrupt\n");
289 goto fail2;
290 }
291
292 #ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS
293 if (up->cts_pin >= 0) {
294 if (request_irq(gpio_to_irq(up->cts_pin),
295 sport_mctrl_cts_int,
296 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
297 IRQF_DISABLED, "BFIN_SPORT_UART_CTS", up)) {
298 up->cts_pin = -1;
299 dev_info(port->dev, "Unable to attach BlackFin UART \
300 over SPORT CTS interrupt. So, disable it.\n");
301 }
302 }
303 if (up->rts_pin >= 0)
304 gpio_direction_output(up->rts_pin, 0);
305 #endif
306
307 return 0;
308 fail2:
309 free_irq(up->port.irq+1, up);
310 fail1:
311 free_irq(up->port.irq, up);
312
313 return ret;
314 }
315
316 /*
317 * sport_uart_tx_chars
318 *
319 * ret 1 means need to enable sport.
320 * ret 0 means do nothing.
321 */
322 static int sport_uart_tx_chars(struct sport_uart_port *up)
323 {
324 struct circ_buf *xmit = &up->port.state->xmit;
325
326 if (SPORT_GET_STAT(up) & TXF)
327 return 0;
328
329 if (up->port.x_char) {
330 tx_one_byte(up, up->port.x_char);
331 up->port.icount.tx++;
332 up->port.x_char = 0;
333 return 1;
334 }
335
336 if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
337 /* The waiting loop to stop SPORT TX from TX interrupt is
338 * too long. This may block SPORT RX interrupts and cause
339 * RX FIFO overflow. So, do stop sport TX only after the last
340 * char in TX FIFO is moved into the shift register.
341 */
342 if (SPORT_GET_STAT(up) & TXHRE)
343 sport_stop_tx(&up->port);
344 return 0;
345 }
346
347 while(!(SPORT_GET_STAT(up) & TXF) && !uart_circ_empty(xmit)) {
348 tx_one_byte(up, xmit->buf[xmit->tail]);
349 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE -1);
350 up->port.icount.tx++;
351 }
352
353 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
354 uart_write_wakeup(&up->port);
355
356 return 1;
357 }
358
359 static unsigned int sport_tx_empty(struct uart_port *port)
360 {
361 struct sport_uart_port *up = (struct sport_uart_port *)port;
362 unsigned int stat;
363
364 stat = SPORT_GET_STAT(up);
365 pr_debug("%s stat:%04x\n", __func__, stat);
366 if (stat & TXHRE) {
367 return TIOCSER_TEMT;
368 } else
369 return 0;
370 }
371
372 static void sport_stop_tx(struct uart_port *port)
373 {
374 struct sport_uart_port *up = (struct sport_uart_port *)port;
375
376 pr_debug("%s enter\n", __func__);
377
378 if (!(SPORT_GET_TCR1(up) & TSPEN))
379 return;
380
381 /* Although the hold register is empty, last byte is still in shift
382 * register and not sent out yet. So, put a dummy data into TX FIFO.
383 * Then, sport tx stops when last byte is shift out and the dummy
384 * data is moved into the shift register.
385 */
386 SPORT_PUT_TX(up, 0xffff);
387 while (!(SPORT_GET_STAT(up) & TXHRE))
388 cpu_relax();
389
390 SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN));
391 SSYNC();
392
393 return;
394 }
395
396 static void sport_start_tx(struct uart_port *port)
397 {
398 struct sport_uart_port *up = (struct sport_uart_port *)port;
399
400 pr_debug("%s enter\n", __func__);
401
402 /* Write data into SPORT FIFO before enable SPROT to transmit */
403 if (sport_uart_tx_chars(up)) {
404 /* Enable transmit, then an interrupt will generated */
405 SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN));
406 SSYNC();
407 }
408
409 pr_debug("%s exit\n", __func__);
410 }
411
412 static void sport_stop_rx(struct uart_port *port)
413 {
414 struct sport_uart_port *up = (struct sport_uart_port *)port;
415
416 pr_debug("%s enter\n", __func__);
417 /* Disable sport to stop rx */
418 SPORT_PUT_RCR1(up, (SPORT_GET_RCR1(up) & ~RSPEN));
419 SSYNC();
420 }
421
422 static void sport_enable_ms(struct uart_port *port)
423 {
424 pr_debug("%s enter\n", __func__);
425 }
426
427 static void sport_break_ctl(struct uart_port *port, int break_state)
428 {
429 pr_debug("%s enter\n", __func__);
430 }
431
432 static void sport_shutdown(struct uart_port *port)
433 {
434 struct sport_uart_port *up = (struct sport_uart_port *)port;
435
436 dev_dbg(port->dev, "%s enter\n", __func__);
437
438 /* Disable sport */
439 SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN));
440 SPORT_PUT_RCR1(up, (SPORT_GET_RCR1(up) & ~RSPEN));
441 SSYNC();
442
443 free_irq(up->port.irq, up);
444 free_irq(up->port.irq+1, up);
445 free_irq(up->err_irq, up);
446 #ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS
447 if (up->cts_pin >= 0)
448 free_irq(gpio_to_irq(up->cts_pin), up);
449 #endif
450 }
451
452 static const char *sport_type(struct uart_port *port)
453 {
454 struct sport_uart_port *up = (struct sport_uart_port *)port;
455
456 pr_debug("%s enter\n", __func__);
457 return up->port.type == PORT_BFIN_SPORT ? "BFIN-SPORT-UART" : NULL;
458 }
459
460 static void sport_release_port(struct uart_port *port)
461 {
462 pr_debug("%s enter\n", __func__);
463 }
464
465 static int sport_request_port(struct uart_port *port)
466 {
467 pr_debug("%s enter\n", __func__);
468 return 0;
469 }
470
471 static void sport_config_port(struct uart_port *port, int flags)
472 {
473 struct sport_uart_port *up = (struct sport_uart_port *)port;
474
475 pr_debug("%s enter\n", __func__);
476 up->port.type = PORT_BFIN_SPORT;
477 }
478
479 static int sport_verify_port(struct uart_port *port, struct serial_struct *ser)
480 {
481 pr_debug("%s enter\n", __func__);
482 return 0;
483 }
484
485 static void sport_set_termios(struct uart_port *port,
486 struct ktermios *termios, struct ktermios *old)
487 {
488 struct sport_uart_port *up = (struct sport_uart_port *)port;
489 unsigned long flags;
490 int i;
491
492 pr_debug("%s enter, c_cflag:%08x\n", __func__, termios->c_cflag);
493
494 switch (termios->c_cflag & CSIZE) {
495 case CS8:
496 up->csize = 8;
497 break;
498 case CS7:
499 up->csize = 7;
500 break;
501 case CS6:
502 up->csize = 6;
503 break;
504 case CS5:
505 up->csize = 5;
506 break;
507 default:
508 pr_warning("requested word length not supported\n");
509 }
510
511 if (termios->c_cflag & CSTOPB) {
512 up->stopb = 1;
513 }
514 if (termios->c_cflag & PARENB) {
515 pr_warning("PAREN bits is not supported yet\n");
516 /* up->parib = 1; */
517 }
518
519 spin_lock_irqsave(&up->port.lock, flags);
520
521 port->read_status_mask = 0;
522
523 /*
524 * Characters to ignore
525 */
526 port->ignore_status_mask = 0;
527
528 /* RX extract mask */
529 up->rxmask = 0x01 | (((up->csize + up->stopb) * 2 - 1) << 0x8);
530 /* TX masks, 8 bit data and 1 bit stop for example:
531 * mask1 = b#0111111110
532 * mask2 = b#1000000000
533 */
534 for (i = 0, up->txmask1 = 0; i < up->csize; i++)
535 up->txmask1 |= (1<<i);
536 up->txmask2 = (1<<i);
537 if (up->stopb) {
538 ++i;
539 up->txmask2 |= (1<<i);
540 }
541 up->txmask1 <<= 1;
542 up->txmask2 <<= 1;
543 /* uart baud rate */
544 port->uartclk = uart_get_baud_rate(port, termios, old, 0, get_sclk()/16);
545
546 /* Disable UART */
547 SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN);
548 SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) & ~RSPEN);
549
550 sport_uart_setup(up, up->csize + up->stopb, port->uartclk);
551
552 /* driver TX line high after config, one dummy data is
553 * necessary to stop sport after shift one byte
554 */
555 SPORT_PUT_TX(up, 0xffff);
556 SPORT_PUT_TX(up, 0xffff);
557 SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN));
558 SSYNC();
559 while (!(SPORT_GET_STAT(up) & TXHRE))
560 cpu_relax();
561 SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN);
562 SSYNC();
563
564 /* Port speed changed, update the per-port timeout. */
565 uart_update_timeout(port, termios->c_cflag, port->uartclk);
566
567 /* Enable sport rx */
568 SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) | RSPEN);
569 SSYNC();
570
571 spin_unlock_irqrestore(&up->port.lock, flags);
572 }
573
574 struct uart_ops sport_uart_ops = {
575 .tx_empty = sport_tx_empty,
576 .set_mctrl = sport_set_mctrl,
577 .get_mctrl = sport_get_mctrl,
578 .stop_tx = sport_stop_tx,
579 .start_tx = sport_start_tx,
580 .stop_rx = sport_stop_rx,
581 .enable_ms = sport_enable_ms,
582 .break_ctl = sport_break_ctl,
583 .startup = sport_startup,
584 .shutdown = sport_shutdown,
585 .set_termios = sport_set_termios,
586 .type = sport_type,
587 .release_port = sport_release_port,
588 .request_port = sport_request_port,
589 .config_port = sport_config_port,
590 .verify_port = sport_verify_port,
591 };
592
593 #define BFIN_SPORT_UART_MAX_PORTS 4
594
595 static struct sport_uart_port *bfin_sport_uart_ports[BFIN_SPORT_UART_MAX_PORTS];
596
597 #ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE
598 #define CLASS_BFIN_SPORT_CONSOLE "bfin-sport-console"
599
600 static int __init
601 sport_uart_console_setup(struct console *co, char *options)
602 {
603 struct sport_uart_port *up;
604 int baud = 57600;
605 int bits = 8;
606 int parity = 'n';
607 # ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS
608 int flow = 'r';
609 # else
610 int flow = 'n';
611 # endif
612
613 /* Check whether an invalid uart number has been specified */
614 if (co->index < 0 || co->index >= BFIN_SPORT_UART_MAX_PORTS)
615 return -ENODEV;
616
617 up = bfin_sport_uart_ports[co->index];
618 if (!up)
619 return -ENODEV;
620
621 if (options)
622 uart_parse_options(options, &baud, &parity, &bits, &flow);
623
624 return uart_set_options(&up->port, co, baud, parity, bits, flow);
625 }
626
627 static void sport_uart_console_putchar(struct uart_port *port, int ch)
628 {
629 struct sport_uart_port *up = (struct sport_uart_port *)port;
630
631 while (SPORT_GET_STAT(up) & TXF)
632 barrier();
633
634 tx_one_byte(up, ch);
635 }
636
637 /*
638 * Interrupts are disabled on entering
639 */
640 static void
641 sport_uart_console_write(struct console *co, const char *s, unsigned int count)
642 {
643 struct sport_uart_port *up = bfin_sport_uart_ports[co->index];
644 unsigned long flags;
645
646 spin_lock_irqsave(&up->port.lock, flags);
647
648 if (SPORT_GET_TCR1(up) & TSPEN)
649 uart_console_write(&up->port, s, count, sport_uart_console_putchar);
650 else {
651 /* dummy data to start sport */
652 while (SPORT_GET_STAT(up) & TXF)
653 barrier();
654 SPORT_PUT_TX(up, 0xffff);
655 /* Enable transmit, then an interrupt will generated */
656 SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN));
657 SSYNC();
658
659 uart_console_write(&up->port, s, count, sport_uart_console_putchar);
660
661 /* Although the hold register is empty, last byte is still in shift
662 * register and not sent out yet. So, put a dummy data into TX FIFO.
663 * Then, sport tx stops when last byte is shift out and the dummy
664 * data is moved into the shift register.
665 */
666 while (SPORT_GET_STAT(up) & TXF)
667 barrier();
668 SPORT_PUT_TX(up, 0xffff);
669 while (!(SPORT_GET_STAT(up) & TXHRE))
670 barrier();
671
672 /* Stop sport tx transfer */
673 SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN));
674 SSYNC();
675 }
676
677 spin_unlock_irqrestore(&up->port.lock, flags);
678 }
679
680 static struct uart_driver sport_uart_reg;
681
682 static struct console sport_uart_console = {
683 .name = DEVICE_NAME,
684 .write = sport_uart_console_write,
685 .device = uart_console_device,
686 .setup = sport_uart_console_setup,
687 .flags = CON_PRINTBUFFER,
688 .index = -1,
689 .data = &sport_uart_reg,
690 };
691
692 #define SPORT_UART_CONSOLE (&sport_uart_console)
693 #else
694 #define SPORT_UART_CONSOLE NULL
695 #endif /* CONFIG_SERIAL_BFIN_SPORT_CONSOLE */
696
697
698 static struct uart_driver sport_uart_reg = {
699 .owner = THIS_MODULE,
700 .driver_name = DRV_NAME,
701 .dev_name = DEVICE_NAME,
702 .major = 204,
703 .minor = 84,
704 .nr = BFIN_SPORT_UART_MAX_PORTS,
705 .cons = SPORT_UART_CONSOLE,
706 };
707
708 #ifdef CONFIG_PM
709 static int sport_uart_suspend(struct device *dev)
710 {
711 struct sport_uart_port *sport = dev_get_drvdata(dev);
712
713 dev_dbg(dev, "%s enter\n", __func__);
714 if (sport)
715 uart_suspend_port(&sport_uart_reg, &sport->port);
716
717 return 0;
718 }
719
720 static int sport_uart_resume(struct device *dev)
721 {
722 struct sport_uart_port *sport = dev_get_drvdata(dev);
723
724 dev_dbg(dev, "%s enter\n", __func__);
725 if (sport)
726 uart_resume_port(&sport_uart_reg, &sport->port);
727
728 return 0;
729 }
730
731 static struct dev_pm_ops bfin_sport_uart_dev_pm_ops = {
732 .suspend = sport_uart_suspend,
733 .resume = sport_uart_resume,
734 };
735 #endif
736
737 static int __devinit sport_uart_probe(struct platform_device *pdev)
738 {
739 struct resource *res;
740 struct sport_uart_port *sport;
741 int ret = 0;
742
743 dev_dbg(&pdev->dev, "%s enter\n", __func__);
744
745 if (pdev->id < 0 || pdev->id >= BFIN_SPORT_UART_MAX_PORTS) {
746 dev_err(&pdev->dev, "Wrong sport uart platform device id.\n");
747 return -ENOENT;
748 }
749
750 if (bfin_sport_uart_ports[pdev->id] == NULL) {
751 bfin_sport_uart_ports[pdev->id] =
752 kzalloc(sizeof(struct sport_uart_port), GFP_KERNEL);
753 sport = bfin_sport_uart_ports[pdev->id];
754 if (!sport) {
755 dev_err(&pdev->dev,
756 "Fail to malloc sport_uart_port\n");
757 return -ENOMEM;
758 }
759
760 ret = peripheral_request_list(
761 (unsigned short *)pdev->dev.platform_data, DRV_NAME);
762 if (ret) {
763 dev_err(&pdev->dev,
764 "Fail to request SPORT peripherals\n");
765 goto out_error_free_mem;
766 }
767
768 spin_lock_init(&sport->port.lock);
769 sport->port.fifosize = SPORT_TX_FIFO_SIZE,
770 sport->port.ops = &sport_uart_ops;
771 sport->port.line = pdev->id;
772 sport->port.iotype = UPIO_MEM;
773 sport->port.flags = UPF_BOOT_AUTOCONF;
774
775 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
776 if (res == NULL) {
777 dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n");
778 ret = -ENOENT;
779 goto out_error_free_peripherals;
780 }
781
782 sport->port.membase = ioremap(res->start, resource_size(res));
783 if (!sport->port.membase) {
784 dev_err(&pdev->dev, "Cannot map sport IO\n");
785 ret = -ENXIO;
786 goto out_error_free_peripherals;
787 }
788 sport->port.mapbase = res->start;
789
790 sport->port.irq = platform_get_irq(pdev, 0);
791 if (sport->port.irq < 0) {
792 dev_err(&pdev->dev, "No sport RX/TX IRQ specified\n");
793 ret = -ENOENT;
794 goto out_error_unmap;
795 }
796
797 sport->err_irq = platform_get_irq(pdev, 1);
798 if (sport->err_irq < 0) {
799 dev_err(&pdev->dev, "No sport status IRQ specified\n");
800 ret = -ENOENT;
801 goto out_error_unmap;
802 }
803 #ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS
804 res = platform_get_resource(pdev, IORESOURCE_IO, 0);
805 if (res == NULL)
806 sport->cts_pin = -1;
807 else
808 sport->cts_pin = res->start;
809
810 res = platform_get_resource(pdev, IORESOURCE_IO, 1);
811 if (res == NULL)
812 sport->rts_pin = -1;
813 else
814 sport->rts_pin = res->start;
815
816 if (sport->rts_pin >= 0)
817 gpio_request(sport->rts_pin, DRV_NAME);
818 #endif
819 }
820
821 #ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE
822 if (!is_early_platform_device(pdev)) {
823 #endif
824 sport = bfin_sport_uart_ports[pdev->id];
825 sport->port.dev = &pdev->dev;
826 dev_set_drvdata(&pdev->dev, sport);
827 ret = uart_add_one_port(&sport_uart_reg, &sport->port);
828 #ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE
829 }
830 #endif
831 if (!ret)
832 return 0;
833
834 if (sport) {
835 out_error_unmap:
836 iounmap(sport->port.membase);
837 out_error_free_peripherals:
838 peripheral_free_list(
839 (unsigned short *)pdev->dev.platform_data);
840 out_error_free_mem:
841 kfree(sport);
842 bfin_sport_uart_ports[pdev->id] = NULL;
843 }
844
845 return ret;
846 }
847
848 static int __devexit sport_uart_remove(struct platform_device *pdev)
849 {
850 struct sport_uart_port *sport = platform_get_drvdata(pdev);
851
852 dev_dbg(&pdev->dev, "%s enter\n", __func__);
853 dev_set_drvdata(&pdev->dev, NULL);
854
855 if (sport) {
856 uart_remove_one_port(&sport_uart_reg, &sport->port);
857 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
858 if (sport->rts_pin >= 0)
859 gpio_free(sport->rts_pin);
860 #endif
861 iounmap(sport->port.membase);
862 peripheral_free_list(
863 (unsigned short *)pdev->dev.platform_data);
864 kfree(sport);
865 bfin_sport_uart_ports[pdev->id] = NULL;
866 }
867
868 return 0;
869 }
870
871 static struct platform_driver sport_uart_driver = {
872 .probe = sport_uart_probe,
873 .remove = __devexit_p(sport_uart_remove),
874 .driver = {
875 .name = DRV_NAME,
876 #ifdef CONFIG_PM
877 .pm = &bfin_sport_uart_dev_pm_ops,
878 #endif
879 },
880 };
881
882 #ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE
883 static __initdata struct early_platform_driver early_sport_uart_driver = {
884 .class_str = CLASS_BFIN_SPORT_CONSOLE,
885 .pdrv = &sport_uart_driver,
886 .requested_id = EARLY_PLATFORM_ID_UNSET,
887 };
888
889 static int __init sport_uart_rs_console_init(void)
890 {
891 early_platform_driver_register(&early_sport_uart_driver, DRV_NAME);
892
893 early_platform_driver_probe(CLASS_BFIN_SPORT_CONSOLE,
894 BFIN_SPORT_UART_MAX_PORTS, 0);
895
896 register_console(&sport_uart_console);
897
898 return 0;
899 }
900 console_initcall(sport_uart_rs_console_init);
901 #endif
902
903 static int __init sport_uart_init(void)
904 {
905 int ret;
906
907 pr_info("Blackfin uart over sport driver\n");
908
909 ret = uart_register_driver(&sport_uart_reg);
910 if (ret) {
911 pr_err("failed to register %s:%d\n",
912 sport_uart_reg.driver_name, ret);
913 return ret;
914 }
915
916 ret = platform_driver_register(&sport_uart_driver);
917 if (ret) {
918 pr_err("failed to register sport uart driver:%d\n", ret);
919 uart_unregister_driver(&sport_uart_reg);
920 }
921
922 return ret;
923 }
924 module_init(sport_uart_init);
925
926 static void __exit sport_uart_exit(void)
927 {
928 platform_driver_unregister(&sport_uart_driver);
929 uart_unregister_driver(&sport_uart_reg);
930 }
931 module_exit(sport_uart_exit);
932
933 MODULE_AUTHOR("Sonic Zhang, Roy Huang");
934 MODULE_DESCRIPTION("Blackfin serial over SPORT driver");
935 MODULE_LICENSE("GPL");
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree