2 * QLogic Fibre Channel HBA Driver
3 * Copyright (c) 2003-2008 QLogic Corporation
5 * See LICENSE.qla2xxx for copyright and licensing details.
9 #include <linux/delay.h>
13 * qla2x00_mailbox_command
14 * Issue mailbox command and waits for completion.
17 * ha = adapter block pointer.
18 * mcp = driver internal mbx struct pointer.
21 * mb[MAX_MAILBOX_REGISTER_COUNT] = returned mailbox data.
24 * 0 : QLA_SUCCESS = cmd performed success
25 * 1 : QLA_FUNCTION_FAILED (error encountered)
26 * 6 : QLA_FUNCTION_TIMEOUT (timeout condition encountered)
32 qla2x00_mailbox_command(scsi_qla_host_t
*vha
, mbx_cmd_t
*mcp
)
35 unsigned long flags
= 0;
36 device_reg_t __iomem
*reg
;
41 uint16_t __iomem
*optr
;
44 unsigned long wait_time
;
45 struct qla_hw_data
*ha
= vha
->hw
;
46 scsi_qla_host_t
*base_vha
= pci_get_drvdata(ha
->pdev
);
48 if (ha
->pdev
->error_state
> pci_channel_io_frozen
)
49 return QLA_FUNCTION_TIMEOUT
;
52 io_lock_on
= base_vha
->flags
.init_done
;
55 abort_active
= test_bit(ABORT_ISP_ACTIVE
, &base_vha
->dpc_flags
);
57 DEBUG11(printk("%s(%ld): entered.\n", __func__
, base_vha
->host_no
));
60 * Wait for active mailbox commands to finish by waiting at most tov
61 * seconds. This is to serialize actual issuing of mailbox cmds during
64 if (!wait_for_completion_timeout(&ha
->mbx_cmd_comp
, mcp
->tov
* HZ
)) {
65 /* Timeout occurred. Return error. */
66 DEBUG2_3_11(printk("%s(%ld): cmd access timeout. "
67 "Exiting.\n", __func__
, base_vha
->host_no
));
68 return QLA_FUNCTION_TIMEOUT
;
71 ha
->flags
.mbox_busy
= 1;
72 /* Save mailbox command for debug */
75 DEBUG11(printk("scsi(%ld): prepare to issue mbox cmd=0x%x.\n",
76 base_vha
->host_no
, mcp
->mb
[0]));
78 spin_lock_irqsave(&ha
->hardware_lock
, flags
);
80 /* Load mailbox registers. */
81 if (IS_FWI2_CAPABLE(ha
))
82 optr
= (uint16_t __iomem
*)®
->isp24
.mailbox0
;
84 optr
= (uint16_t __iomem
*)MAILBOX_REG(ha
, ®
->isp
, 0);
90 for (cnt
= 0; cnt
< ha
->mbx_count
; cnt
++) {
91 if (IS_QLA2200(ha
) && cnt
== 8)
93 (uint16_t __iomem
*)MAILBOX_REG(ha
, ®
->isp
, 8);
95 WRT_REG_WORD(optr
, *iptr
);
102 #if defined(QL_DEBUG_LEVEL_1)
103 printk("%s(%ld): Loaded MBX registers (displayed in bytes) = \n",
104 __func__
, base_vha
->host_no
);
105 qla2x00_dump_buffer((uint8_t *)mcp
->mb
, 16);
107 qla2x00_dump_buffer(((uint8_t *)mcp
->mb
+ 0x10), 16);
109 qla2x00_dump_buffer(((uint8_t *)mcp
->mb
+ 0x20), 8);
111 printk("%s(%ld): I/O address = %p.\n", __func__
, base_vha
->host_no
,
113 qla2x00_dump_regs(base_vha
);
116 /* Issue set host interrupt command to send cmd out. */
117 ha
->flags
.mbox_int
= 0;
118 clear_bit(MBX_INTERRUPT
, &ha
->mbx_cmd_flags
);
120 /* Unlock mbx registers and wait for interrupt */
121 DEBUG11(printk("%s(%ld): going to unlock irq & waiting for interrupt. "
122 "jiffies=%lx.\n", __func__
, base_vha
->host_no
, jiffies
));
124 /* Wait for mbx cmd completion until timeout */
126 if ((!abort_active
&& io_lock_on
) || IS_NOPOLLING_TYPE(ha
)) {
127 set_bit(MBX_INTR_WAIT
, &ha
->mbx_cmd_flags
);
129 if (IS_FWI2_CAPABLE(ha
))
130 WRT_REG_DWORD(®
->isp24
.hccr
, HCCRX_SET_HOST_INT
);
132 WRT_REG_WORD(®
->isp
.hccr
, HCCR_SET_HOST_INT
);
133 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
135 wait_for_completion_timeout(&ha
->mbx_intr_comp
, mcp
->tov
* HZ
);
137 clear_bit(MBX_INTR_WAIT
, &ha
->mbx_cmd_flags
);
140 DEBUG3_11(printk("%s(%ld): cmd=%x POLLING MODE.\n", __func__
,
141 base_vha
->host_no
, command
));
143 if (IS_FWI2_CAPABLE(ha
))
144 WRT_REG_DWORD(®
->isp24
.hccr
, HCCRX_SET_HOST_INT
);
146 WRT_REG_WORD(®
->isp
.hccr
, HCCR_SET_HOST_INT
);
147 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
149 wait_time
= jiffies
+ mcp
->tov
* HZ
; /* wait at most tov secs */
150 while (!ha
->flags
.mbox_int
) {
151 if (time_after(jiffies
, wait_time
))
154 /* Check for pending interrupts. */
155 qla2x00_poll(ha
->rsp_q_map
[0]);
157 if (command
!= MBC_LOAD_RISC_RAM_EXTENDED
&&
163 /* Check whether we timed out */
164 if (ha
->flags
.mbox_int
) {
167 DEBUG3_11(printk("%s(%ld): cmd %x completed.\n", __func__
,
168 base_vha
->host_no
, command
));
170 /* Got interrupt. Clear the flag. */
171 ha
->flags
.mbox_int
= 0;
172 clear_bit(MBX_INTERRUPT
, &ha
->mbx_cmd_flags
);
174 if (ha
->mailbox_out
[0] != MBS_COMMAND_COMPLETE
)
175 rval
= QLA_FUNCTION_FAILED
;
177 /* Load return mailbox registers. */
179 iptr
= (uint16_t *)&ha
->mailbox_out
[0];
181 for (cnt
= 0; cnt
< ha
->mbx_count
; cnt
++) {
191 #if defined(QL_DEBUG_LEVEL_2) || defined(QL_DEBUG_LEVEL_3) || \
192 defined(QL_DEBUG_LEVEL_11)
196 if (IS_FWI2_CAPABLE(ha
)) {
197 mb0
= RD_REG_WORD(®
->isp24
.mailbox0
);
198 ictrl
= RD_REG_DWORD(®
->isp24
.ictrl
);
200 mb0
= RD_MAILBOX_REG(ha
, ®
->isp
, 0);
201 ictrl
= RD_REG_WORD(®
->isp
.ictrl
);
203 printk("%s(%ld): **** MB Command Timeout for cmd %x ****\n",
204 __func__
, base_vha
->host_no
, command
);
205 printk("%s(%ld): icontrol=%x jiffies=%lx\n", __func__
,
206 base_vha
->host_no
, ictrl
, jiffies
);
207 printk("%s(%ld): *** mailbox[0] = 0x%x ***\n", __func__
,
208 base_vha
->host_no
, mb0
);
209 qla2x00_dump_regs(base_vha
);
212 rval
= QLA_FUNCTION_TIMEOUT
;
215 ha
->flags
.mbox_busy
= 0;
220 if ((abort_active
|| !io_lock_on
) && !IS_NOPOLLING_TYPE(ha
)) {
221 DEBUG11(printk("%s(%ld): checking for additional resp "
222 "interrupt.\n", __func__
, base_vha
->host_no
));
224 /* polling mode for non isp_abort commands. */
225 qla2x00_poll(ha
->rsp_q_map
[0]);
228 if (rval
== QLA_FUNCTION_TIMEOUT
&&
229 mcp
->mb
[0] != MBC_GEN_SYSTEM_ERROR
) {
230 if (!io_lock_on
|| (mcp
->flags
& IOCTL_CMD
)) {
231 /* not in dpc. schedule it for dpc to take over. */
232 DEBUG(printk("%s(%ld): timeout schedule "
233 "isp_abort_needed.\n", __func__
,
235 DEBUG2_3_11(printk("%s(%ld): timeout schedule "
236 "isp_abort_needed.\n", __func__
,
238 qla_printk(KERN_WARNING
, ha
,
239 "Mailbox command timeout occurred. Scheduling ISP "
241 set_bit(ISP_ABORT_NEEDED
, &base_vha
->dpc_flags
);
242 qla2xxx_wake_dpc(vha
);
243 } else if (!abort_active
) {
244 /* call abort directly since we are in the DPC thread */
245 DEBUG(printk("%s(%ld): timeout calling abort_isp\n",
246 __func__
, base_vha
->host_no
));
247 DEBUG2_3_11(printk("%s(%ld): timeout calling "
248 "abort_isp\n", __func__
, base_vha
->host_no
));
249 qla_printk(KERN_WARNING
, ha
,
250 "Mailbox command timeout occurred. Issuing ISP "
253 set_bit(ABORT_ISP_ACTIVE
, &base_vha
->dpc_flags
);
254 clear_bit(ISP_ABORT_NEEDED
, &base_vha
->dpc_flags
);
255 if (qla2x00_abort_isp(base_vha
)) {
256 /* Failed. retry later. */
257 set_bit(ISP_ABORT_NEEDED
, &base_vha
->dpc_flags
);
259 clear_bit(ABORT_ISP_ACTIVE
, &base_vha
->dpc_flags
);
260 DEBUG(printk("%s(%ld): finished abort_isp\n", __func__
,
262 DEBUG2_3_11(printk("%s(%ld): finished abort_isp\n",
263 __func__
, base_vha
->host_no
));
267 /* Allow next mbx cmd to come in. */
268 complete(&ha
->mbx_cmd_comp
);
271 DEBUG2_3_11(printk("%s(%ld): **** FAILED. mbx0=%x, mbx1=%x, "
272 "mbx2=%x, cmd=%x ****\n", __func__
, base_vha
->host_no
,
273 mcp
->mb
[0], mcp
->mb
[1], mcp
->mb
[2], command
));
275 DEBUG11(printk("%s(%ld): done.\n", __func__
,
283 qla2x00_load_ram(scsi_qla_host_t
*vha
, dma_addr_t req_dma
, uint32_t risc_addr
,
284 uint32_t risc_code_size
)
287 struct qla_hw_data
*ha
= vha
->hw
;
289 mbx_cmd_t
*mcp
= &mc
;
291 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
293 if (MSW(risc_addr
) || IS_FWI2_CAPABLE(ha
)) {
294 mcp
->mb
[0] = MBC_LOAD_RISC_RAM_EXTENDED
;
295 mcp
->mb
[8] = MSW(risc_addr
);
296 mcp
->out_mb
= MBX_8
|MBX_0
;
298 mcp
->mb
[0] = MBC_LOAD_RISC_RAM
;
301 mcp
->mb
[1] = LSW(risc_addr
);
302 mcp
->mb
[2] = MSW(req_dma
);
303 mcp
->mb
[3] = LSW(req_dma
);
304 mcp
->mb
[6] = MSW(MSD(req_dma
));
305 mcp
->mb
[7] = LSW(MSD(req_dma
));
306 mcp
->out_mb
|= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
;
307 if (IS_FWI2_CAPABLE(ha
)) {
308 mcp
->mb
[4] = MSW(risc_code_size
);
309 mcp
->mb
[5] = LSW(risc_code_size
);
310 mcp
->out_mb
|= MBX_5
|MBX_4
;
312 mcp
->mb
[4] = LSW(risc_code_size
);
313 mcp
->out_mb
|= MBX_4
;
317 mcp
->tov
= MBX_TOV_SECONDS
;
319 rval
= qla2x00_mailbox_command(vha
, mcp
);
321 if (rval
!= QLA_SUCCESS
) {
322 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__
,
323 vha
->host_no
, rval
, mcp
->mb
[0]));
325 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
333 * Start adapter firmware.
336 * ha = adapter block pointer.
337 * TARGET_QUEUE_LOCK must be released.
338 * ADAPTER_STATE_LOCK must be released.
341 * qla2x00 local function return status code.
347 qla2x00_execute_fw(scsi_qla_host_t
*vha
, uint32_t risc_addr
)
350 struct qla_hw_data
*ha
= vha
->hw
;
352 mbx_cmd_t
*mcp
= &mc
;
354 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
356 mcp
->mb
[0] = MBC_EXECUTE_FIRMWARE
;
359 if (IS_FWI2_CAPABLE(ha
)) {
360 mcp
->mb
[1] = MSW(risc_addr
);
361 mcp
->mb
[2] = LSW(risc_addr
);
364 mcp
->out_mb
|= MBX_4
|MBX_3
|MBX_2
|MBX_1
;
367 mcp
->mb
[1] = LSW(risc_addr
);
368 mcp
->out_mb
|= MBX_1
;
369 if (IS_QLA2322(ha
) || IS_QLA6322(ha
)) {
371 mcp
->out_mb
|= MBX_2
;
375 mcp
->tov
= MBX_TOV_SECONDS
;
377 rval
= qla2x00_mailbox_command(vha
, mcp
);
379 if (rval
!= QLA_SUCCESS
) {
380 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__
,
381 vha
->host_no
, rval
, mcp
->mb
[0]));
383 if (IS_FWI2_CAPABLE(ha
)) {
384 DEBUG11(printk("%s(%ld): done exchanges=%x.\n",
385 __func__
, vha
->host_no
, mcp
->mb
[1]));
387 DEBUG11(printk("%s(%ld): done.\n", __func__
,
396 * qla2x00_get_fw_version
397 * Get firmware version.
400 * ha: adapter state pointer.
401 * major: pointer for major number.
402 * minor: pointer for minor number.
403 * subminor: pointer for subminor number.
406 * qla2x00 local function return status code.
412 qla2x00_get_fw_version(scsi_qla_host_t
*vha
, uint16_t *major
, uint16_t *minor
,
413 uint16_t *subminor
, uint16_t *attributes
, uint32_t *memory
, uint8_t *mpi
,
414 uint32_t *mpi_caps
, uint8_t *phy
)
418 mbx_cmd_t
*mcp
= &mc
;
420 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
422 mcp
->mb
[0] = MBC_GET_FIRMWARE_VERSION
;
424 mcp
->in_mb
= MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
425 if (IS_QLA81XX(vha
->hw
))
426 mcp
->in_mb
|= MBX_13
|MBX_12
|MBX_11
|MBX_10
|MBX_9
|MBX_8
;
428 mcp
->tov
= MBX_TOV_SECONDS
;
429 rval
= qla2x00_mailbox_command(vha
, mcp
);
430 if (rval
!= QLA_SUCCESS
)
433 /* Return mailbox data. */
436 *subminor
= mcp
->mb
[3];
437 *attributes
= mcp
->mb
[6];
438 if (IS_QLA2100(vha
->hw
) || IS_QLA2200(vha
->hw
))
439 *memory
= 0x1FFFF; /* Defaults to 128KB. */
441 *memory
= (mcp
->mb
[5] << 16) | mcp
->mb
[4];
442 if (IS_QLA81XX(vha
->hw
)) {
443 mpi
[0] = mcp
->mb
[10] & 0xff;
444 mpi
[1] = mcp
->mb
[11] >> 8;
445 mpi
[2] = mcp
->mb
[11] & 0xff;
446 *mpi_caps
= (mcp
->mb
[12] << 16) | mcp
->mb
[13];
447 phy
[0] = mcp
->mb
[8] & 0xff;
448 phy
[1] = mcp
->mb
[9] >> 8;
449 phy
[2] = mcp
->mb
[9] & 0xff;
452 if (rval
!= QLA_SUCCESS
) {
454 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
455 vha
->host_no
, rval
));
458 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
464 * qla2x00_get_fw_options
465 * Set firmware options.
468 * ha = adapter block pointer.
469 * fwopt = pointer for firmware options.
472 * qla2x00 local function return status code.
478 qla2x00_get_fw_options(scsi_qla_host_t
*vha
, uint16_t *fwopts
)
482 mbx_cmd_t
*mcp
= &mc
;
484 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
486 mcp
->mb
[0] = MBC_GET_FIRMWARE_OPTION
;
488 mcp
->in_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
489 mcp
->tov
= MBX_TOV_SECONDS
;
491 rval
= qla2x00_mailbox_command(vha
, mcp
);
493 if (rval
!= QLA_SUCCESS
) {
495 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
496 vha
->host_no
, rval
));
498 fwopts
[0] = mcp
->mb
[0];
499 fwopts
[1] = mcp
->mb
[1];
500 fwopts
[2] = mcp
->mb
[2];
501 fwopts
[3] = mcp
->mb
[3];
503 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
511 * qla2x00_set_fw_options
512 * Set firmware options.
515 * ha = adapter block pointer.
516 * fwopt = pointer for firmware options.
519 * qla2x00 local function return status code.
525 qla2x00_set_fw_options(scsi_qla_host_t
*vha
, uint16_t *fwopts
)
529 mbx_cmd_t
*mcp
= &mc
;
531 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
533 mcp
->mb
[0] = MBC_SET_FIRMWARE_OPTION
;
534 mcp
->mb
[1] = fwopts
[1];
535 mcp
->mb
[2] = fwopts
[2];
536 mcp
->mb
[3] = fwopts
[3];
537 mcp
->out_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
539 if (IS_FWI2_CAPABLE(vha
->hw
)) {
542 mcp
->mb
[10] = fwopts
[10];
543 mcp
->mb
[11] = fwopts
[11];
544 mcp
->mb
[12] = 0; /* Undocumented, but used */
545 mcp
->out_mb
|= MBX_12
|MBX_11
|MBX_10
;
547 mcp
->tov
= MBX_TOV_SECONDS
;
549 rval
= qla2x00_mailbox_command(vha
, mcp
);
551 fwopts
[0] = mcp
->mb
[0];
553 if (rval
!= QLA_SUCCESS
) {
555 DEBUG2_3_11(printk("%s(%ld): failed=%x (%x/%x).\n", __func__
,
556 vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
559 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
566 * qla2x00_mbx_reg_test
567 * Mailbox register wrap test.
570 * ha = adapter block pointer.
571 * TARGET_QUEUE_LOCK must be released.
572 * ADAPTER_STATE_LOCK must be released.
575 * qla2x00 local function return status code.
581 qla2x00_mbx_reg_test(scsi_qla_host_t
*vha
)
585 mbx_cmd_t
*mcp
= &mc
;
587 DEBUG11(printk("qla2x00_mbx_reg_test(%ld): entered.\n", vha
->host_no
));
589 mcp
->mb
[0] = MBC_MAILBOX_REGISTER_TEST
;
597 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
598 mcp
->in_mb
= MBX_7
|MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
599 mcp
->tov
= MBX_TOV_SECONDS
;
601 rval
= qla2x00_mailbox_command(vha
, mcp
);
603 if (rval
== QLA_SUCCESS
) {
604 if (mcp
->mb
[1] != 0xAAAA || mcp
->mb
[2] != 0x5555 ||
605 mcp
->mb
[3] != 0xAA55 || mcp
->mb
[4] != 0x55AA)
606 rval
= QLA_FUNCTION_FAILED
;
607 if (mcp
->mb
[5] != 0xA5A5 || mcp
->mb
[6] != 0x5A5A ||
608 mcp
->mb
[7] != 0x2525)
609 rval
= QLA_FUNCTION_FAILED
;
612 if (rval
!= QLA_SUCCESS
) {
614 DEBUG2_3_11(printk("qla2x00_mbx_reg_test(%ld): failed=%x.\n",
615 vha
->host_no
, rval
));
618 DEBUG11(printk("qla2x00_mbx_reg_test(%ld): done.\n",
626 * qla2x00_verify_checksum
627 * Verify firmware checksum.
630 * ha = adapter block pointer.
631 * TARGET_QUEUE_LOCK must be released.
632 * ADAPTER_STATE_LOCK must be released.
635 * qla2x00 local function return status code.
641 qla2x00_verify_checksum(scsi_qla_host_t
*vha
, uint32_t risc_addr
)
645 mbx_cmd_t
*mcp
= &mc
;
647 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
649 mcp
->mb
[0] = MBC_VERIFY_CHECKSUM
;
652 if (IS_FWI2_CAPABLE(vha
->hw
)) {
653 mcp
->mb
[1] = MSW(risc_addr
);
654 mcp
->mb
[2] = LSW(risc_addr
);
655 mcp
->out_mb
|= MBX_2
|MBX_1
;
656 mcp
->in_mb
|= MBX_2
|MBX_1
;
658 mcp
->mb
[1] = LSW(risc_addr
);
659 mcp
->out_mb
|= MBX_1
;
663 mcp
->tov
= MBX_TOV_SECONDS
;
665 rval
= qla2x00_mailbox_command(vha
, mcp
);
667 if (rval
!= QLA_SUCCESS
) {
668 DEBUG2_3_11(printk("%s(%ld): failed=%x chk sum=%x.\n", __func__
,
669 vha
->host_no
, rval
, IS_FWI2_CAPABLE(vha
->hw
) ?
670 (mcp
->mb
[2] << 16) | mcp
->mb
[1]: mcp
->mb
[1]));
672 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
680 * Issue IOCB using mailbox command
683 * ha = adapter state pointer.
684 * buffer = buffer pointer.
685 * phys_addr = physical address of buffer.
686 * size = size of buffer.
687 * TARGET_QUEUE_LOCK must be released.
688 * ADAPTER_STATE_LOCK must be released.
691 * qla2x00 local function return status code.
697 qla2x00_issue_iocb_timeout(scsi_qla_host_t
*vha
, void *buffer
,
698 dma_addr_t phys_addr
, size_t size
, uint32_t tov
)
702 mbx_cmd_t
*mcp
= &mc
;
704 mcp
->mb
[0] = MBC_IOCB_COMMAND_A64
;
706 mcp
->mb
[2] = MSW(phys_addr
);
707 mcp
->mb
[3] = LSW(phys_addr
);
708 mcp
->mb
[6] = MSW(MSD(phys_addr
));
709 mcp
->mb
[7] = LSW(MSD(phys_addr
));
710 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
711 mcp
->in_mb
= MBX_2
|MBX_0
;
714 rval
= qla2x00_mailbox_command(vha
, mcp
);
716 if (rval
!= QLA_SUCCESS
) {
718 DEBUG(printk("qla2x00_issue_iocb(%ld): failed rval 0x%x\n",
719 vha
->host_no
, rval
));
721 sts_entry_t
*sts_entry
= (sts_entry_t
*) buffer
;
723 /* Mask reserved bits. */
724 sts_entry
->entry_status
&=
725 IS_FWI2_CAPABLE(vha
->hw
) ? RF_MASK_24XX
: RF_MASK
;
732 qla2x00_issue_iocb(scsi_qla_host_t
*vha
, void *buffer
, dma_addr_t phys_addr
,
735 return qla2x00_issue_iocb_timeout(vha
, buffer
, phys_addr
, size
,
740 * qla2x00_abort_command
741 * Abort command aborts a specified IOCB.
744 * ha = adapter block pointer.
745 * sp = SB structure pointer.
748 * qla2x00 local function return status code.
754 qla2x00_abort_command(srb_t
*sp
)
756 unsigned long flags
= 0;
760 mbx_cmd_t
*mcp
= &mc
;
761 fc_port_t
*fcport
= sp
->fcport
;
762 scsi_qla_host_t
*vha
= fcport
->vha
;
763 struct qla_hw_data
*ha
= vha
->hw
;
764 struct req_que
*req
= vha
->req
;
766 DEBUG11(printk("qla2x00_abort_command(%ld): entered.\n", vha
->host_no
));
768 spin_lock_irqsave(&ha
->hardware_lock
, flags
);
769 for (handle
= 1; handle
< MAX_OUTSTANDING_COMMANDS
; handle
++) {
770 if (req
->outstanding_cmds
[handle
] == sp
)
773 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
775 if (handle
== MAX_OUTSTANDING_COMMANDS
) {
776 /* command not found */
777 return QLA_FUNCTION_FAILED
;
780 mcp
->mb
[0] = MBC_ABORT_COMMAND
;
781 if (HAS_EXTENDED_IDS(ha
))
782 mcp
->mb
[1] = fcport
->loop_id
;
784 mcp
->mb
[1] = fcport
->loop_id
<< 8;
785 mcp
->mb
[2] = (uint16_t)handle
;
786 mcp
->mb
[3] = (uint16_t)(handle
>> 16);
787 mcp
->mb
[6] = (uint16_t)sp
->cmd
->device
->lun
;
788 mcp
->out_mb
= MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
790 mcp
->tov
= MBX_TOV_SECONDS
;
792 rval
= qla2x00_mailbox_command(vha
, mcp
);
794 if (rval
!= QLA_SUCCESS
) {
795 DEBUG2_3_11(printk("qla2x00_abort_command(%ld): failed=%x.\n",
796 vha
->host_no
, rval
));
798 DEBUG11(printk("qla2x00_abort_command(%ld): done.\n",
806 qla2x00_abort_target(struct fc_port
*fcport
, unsigned int l
, int tag
)
810 mbx_cmd_t
*mcp
= &mc
;
811 scsi_qla_host_t
*vha
;
815 DEBUG11(printk("%s(%ld): entered.\n", __func__
, fcport
->vha
->host_no
));
819 req
= vha
->hw
->req_q_map
[tag
];
820 rsp
= vha
->hw
->rsp_q_map
[tag
];
821 mcp
->mb
[0] = MBC_ABORT_TARGET
;
822 mcp
->out_mb
= MBX_9
|MBX_2
|MBX_1
|MBX_0
;
823 if (HAS_EXTENDED_IDS(vha
->hw
)) {
824 mcp
->mb
[1] = fcport
->loop_id
;
826 mcp
->out_mb
|= MBX_10
;
828 mcp
->mb
[1] = fcport
->loop_id
<< 8;
830 mcp
->mb
[2] = vha
->hw
->loop_reset_delay
;
831 mcp
->mb
[9] = vha
->vp_idx
;
834 mcp
->tov
= MBX_TOV_SECONDS
;
836 rval
= qla2x00_mailbox_command(vha
, mcp
);
837 if (rval
!= QLA_SUCCESS
) {
838 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
839 vha
->host_no
, rval
));
842 /* Issue marker IOCB. */
843 rval2
= qla2x00_marker(vha
, req
, rsp
, fcport
->loop_id
, 0,
845 if (rval2
!= QLA_SUCCESS
) {
846 DEBUG2_3_11(printk("%s(%ld): failed to issue Marker IOCB "
847 "(%x).\n", __func__
, vha
->host_no
, rval2
));
849 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
856 qla2x00_lun_reset(struct fc_port
*fcport
, unsigned int l
, int tag
)
860 mbx_cmd_t
*mcp
= &mc
;
861 scsi_qla_host_t
*vha
;
865 DEBUG11(printk("%s(%ld): entered.\n", __func__
, fcport
->vha
->host_no
));
868 req
= vha
->hw
->req_q_map
[tag
];
869 rsp
= vha
->hw
->rsp_q_map
[tag
];
870 mcp
->mb
[0] = MBC_LUN_RESET
;
871 mcp
->out_mb
= MBX_9
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
872 if (HAS_EXTENDED_IDS(vha
->hw
))
873 mcp
->mb
[1] = fcport
->loop_id
;
875 mcp
->mb
[1] = fcport
->loop_id
<< 8;
878 mcp
->mb
[9] = vha
->vp_idx
;
881 mcp
->tov
= MBX_TOV_SECONDS
;
883 rval
= qla2x00_mailbox_command(vha
, mcp
);
884 if (rval
!= QLA_SUCCESS
) {
885 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
886 vha
->host_no
, rval
));
889 /* Issue marker IOCB. */
890 rval2
= qla2x00_marker(vha
, req
, rsp
, fcport
->loop_id
, l
,
892 if (rval2
!= QLA_SUCCESS
) {
893 DEBUG2_3_11(printk("%s(%ld): failed to issue Marker IOCB "
894 "(%x).\n", __func__
, vha
->host_no
, rval2
));
896 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
903 * qla2x00_get_adapter_id
904 * Get adapter ID and topology.
907 * ha = adapter block pointer.
908 * id = pointer for loop ID.
909 * al_pa = pointer for AL_PA.
910 * area = pointer for area.
911 * domain = pointer for domain.
912 * top = pointer for topology.
913 * TARGET_QUEUE_LOCK must be released.
914 * ADAPTER_STATE_LOCK must be released.
917 * qla2x00 local function return status code.
923 qla2x00_get_adapter_id(scsi_qla_host_t
*vha
, uint16_t *id
, uint8_t *al_pa
,
924 uint8_t *area
, uint8_t *domain
, uint16_t *top
, uint16_t *sw_cap
)
928 mbx_cmd_t
*mcp
= &mc
;
930 DEBUG11(printk("qla2x00_get_adapter_id(%ld): entered.\n",
933 mcp
->mb
[0] = MBC_GET_ADAPTER_LOOP_ID
;
934 mcp
->mb
[9] = vha
->vp_idx
;
935 mcp
->out_mb
= MBX_9
|MBX_0
;
936 mcp
->in_mb
= MBX_9
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
937 if (IS_QLA81XX(vha
->hw
))
938 mcp
->in_mb
|= MBX_13
|MBX_12
|MBX_11
|MBX_10
;
939 mcp
->tov
= MBX_TOV_SECONDS
;
941 rval
= qla2x00_mailbox_command(vha
, mcp
);
942 if (mcp
->mb
[0] == MBS_COMMAND_ERROR
)
943 rval
= QLA_COMMAND_ERROR
;
944 else if (mcp
->mb
[0] == MBS_INVALID_COMMAND
)
945 rval
= QLA_INVALID_COMMAND
;
949 *al_pa
= LSB(mcp
->mb
[2]);
950 *area
= MSB(mcp
->mb
[2]);
951 *domain
= LSB(mcp
->mb
[3]);
953 *sw_cap
= mcp
->mb
[7];
955 if (rval
!= QLA_SUCCESS
) {
957 DEBUG2_3_11(printk("qla2x00_get_adapter_id(%ld): failed=%x.\n",
958 vha
->host_no
, rval
));
960 DEBUG11(printk("qla2x00_get_adapter_id(%ld): done.\n",
963 if (IS_QLA81XX(vha
->hw
)) {
964 vha
->fcoe_vlan_id
= mcp
->mb
[9] & 0xfff;
965 vha
->fcoe_fcf_idx
= mcp
->mb
[10];
966 vha
->fcoe_vn_port_mac
[5] = mcp
->mb
[11] >> 8;
967 vha
->fcoe_vn_port_mac
[4] = mcp
->mb
[11] & 0xff;
968 vha
->fcoe_vn_port_mac
[3] = mcp
->mb
[12] >> 8;
969 vha
->fcoe_vn_port_mac
[2] = mcp
->mb
[12] & 0xff;
970 vha
->fcoe_vn_port_mac
[1] = mcp
->mb
[13] >> 8;
971 vha
->fcoe_vn_port_mac
[0] = mcp
->mb
[13] & 0xff;
979 * qla2x00_get_retry_cnt
980 * Get current firmware login retry count and delay.
983 * ha = adapter block pointer.
984 * retry_cnt = pointer to login retry count.
985 * tov = pointer to login timeout value.
988 * qla2x00 local function return status code.
994 qla2x00_get_retry_cnt(scsi_qla_host_t
*vha
, uint8_t *retry_cnt
, uint8_t *tov
,
1000 mbx_cmd_t
*mcp
= &mc
;
1002 DEBUG11(printk("qla2x00_get_retry_cnt(%ld): entered.\n",
1005 mcp
->mb
[0] = MBC_GET_RETRY_COUNT
;
1006 mcp
->out_mb
= MBX_0
;
1007 mcp
->in_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1008 mcp
->tov
= MBX_TOV_SECONDS
;
1010 rval
= qla2x00_mailbox_command(vha
, mcp
);
1012 if (rval
!= QLA_SUCCESS
) {
1014 DEBUG2_3_11(printk("qla2x00_get_retry_cnt(%ld): failed = %x.\n",
1015 vha
->host_no
, mcp
->mb
[0]));
1017 /* Convert returned data and check our values. */
1018 *r_a_tov
= mcp
->mb
[3] / 2;
1019 ratov
= (mcp
->mb
[3]/2) / 10; /* mb[3] value is in 100ms */
1020 if (mcp
->mb
[1] * ratov
> (*retry_cnt
) * (*tov
)) {
1021 /* Update to the larger values */
1022 *retry_cnt
= (uint8_t)mcp
->mb
[1];
1026 DEBUG11(printk("qla2x00_get_retry_cnt(%ld): done. mb3=%d "
1027 "ratov=%d.\n", vha
->host_no
, mcp
->mb
[3], ratov
));
1034 * qla2x00_init_firmware
1035 * Initialize adapter firmware.
1038 * ha = adapter block pointer.
1039 * dptr = Initialization control block pointer.
1040 * size = size of initialization control block.
1041 * TARGET_QUEUE_LOCK must be released.
1042 * ADAPTER_STATE_LOCK must be released.
1045 * qla2x00 local function return status code.
1051 qla2x00_init_firmware(scsi_qla_host_t
*vha
, uint16_t size
)
1055 mbx_cmd_t
*mcp
= &mc
;
1056 struct qla_hw_data
*ha
= vha
->hw
;
1058 DEBUG11(printk("qla2x00_init_firmware(%ld): entered.\n",
1061 if (ha
->flags
.npiv_supported
)
1062 mcp
->mb
[0] = MBC_MID_INITIALIZE_FIRMWARE
;
1064 mcp
->mb
[0] = MBC_INITIALIZE_FIRMWARE
;
1067 mcp
->mb
[2] = MSW(ha
->init_cb_dma
);
1068 mcp
->mb
[3] = LSW(ha
->init_cb_dma
);
1069 mcp
->mb
[6] = MSW(MSD(ha
->init_cb_dma
));
1070 mcp
->mb
[7] = LSW(MSD(ha
->init_cb_dma
));
1071 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1072 if (IS_QLA81XX(ha
) && ha
->ex_init_cb
->ex_version
) {
1074 mcp
->mb
[10] = MSW(ha
->ex_init_cb_dma
);
1075 mcp
->mb
[11] = LSW(ha
->ex_init_cb_dma
);
1076 mcp
->mb
[12] = MSW(MSD(ha
->ex_init_cb_dma
));
1077 mcp
->mb
[13] = LSW(MSD(ha
->ex_init_cb_dma
));
1078 mcp
->mb
[14] = sizeof(*ha
->ex_init_cb
);
1079 mcp
->out_mb
|= MBX_14
|MBX_13
|MBX_12
|MBX_11
|MBX_10
;
1082 mcp
->buf_size
= size
;
1083 mcp
->flags
= MBX_DMA_OUT
;
1084 mcp
->tov
= MBX_TOV_SECONDS
;
1085 rval
= qla2x00_mailbox_command(vha
, mcp
);
1087 if (rval
!= QLA_SUCCESS
) {
1089 DEBUG2_3_11(printk("qla2x00_init_firmware(%ld): failed=%x "
1091 vha
->host_no
, rval
, mcp
->mb
[0]));
1094 DEBUG11(printk("qla2x00_init_firmware(%ld): done.\n",
1102 * qla2x00_get_port_database
1103 * Issue normal/enhanced get port database mailbox command
1104 * and copy device name as necessary.
1107 * ha = adapter state pointer.
1108 * dev = structure pointer.
1109 * opt = enhanced cmd option byte.
1112 * qla2x00 local function return status code.
1118 qla2x00_get_port_database(scsi_qla_host_t
*vha
, fc_port_t
*fcport
, uint8_t opt
)
1122 mbx_cmd_t
*mcp
= &mc
;
1123 port_database_t
*pd
;
1124 struct port_database_24xx
*pd24
;
1126 struct qla_hw_data
*ha
= vha
->hw
;
1128 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
1131 pd
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &pd_dma
);
1133 DEBUG2_3(printk("%s(%ld): failed to allocate Port Database "
1134 "structure.\n", __func__
, vha
->host_no
));
1135 return QLA_MEMORY_ALLOC_FAILED
;
1137 memset(pd
, 0, max(PORT_DATABASE_SIZE
, PORT_DATABASE_24XX_SIZE
));
1139 mcp
->mb
[0] = MBC_GET_PORT_DATABASE
;
1140 if (opt
!= 0 && !IS_FWI2_CAPABLE(ha
))
1141 mcp
->mb
[0] = MBC_ENHANCED_GET_PORT_DATABASE
;
1142 mcp
->mb
[2] = MSW(pd_dma
);
1143 mcp
->mb
[3] = LSW(pd_dma
);
1144 mcp
->mb
[6] = MSW(MSD(pd_dma
));
1145 mcp
->mb
[7] = LSW(MSD(pd_dma
));
1146 mcp
->mb
[9] = vha
->vp_idx
;
1147 mcp
->out_mb
= MBX_9
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_0
;
1149 if (IS_FWI2_CAPABLE(ha
)) {
1150 mcp
->mb
[1] = fcport
->loop_id
;
1152 mcp
->out_mb
|= MBX_10
|MBX_1
;
1153 mcp
->in_mb
|= MBX_1
;
1154 } else if (HAS_EXTENDED_IDS(ha
)) {
1155 mcp
->mb
[1] = fcport
->loop_id
;
1157 mcp
->out_mb
|= MBX_10
|MBX_1
;
1159 mcp
->mb
[1] = fcport
->loop_id
<< 8 | opt
;
1160 mcp
->out_mb
|= MBX_1
;
1162 mcp
->buf_size
= IS_FWI2_CAPABLE(ha
) ?
1163 PORT_DATABASE_24XX_SIZE
: PORT_DATABASE_SIZE
;
1164 mcp
->flags
= MBX_DMA_IN
;
1165 mcp
->tov
= (ha
->login_timeout
* 2) + (ha
->login_timeout
/ 2);
1166 rval
= qla2x00_mailbox_command(vha
, mcp
);
1167 if (rval
!= QLA_SUCCESS
)
1170 if (IS_FWI2_CAPABLE(ha
)) {
1171 pd24
= (struct port_database_24xx
*) pd
;
1173 /* Check for logged in state. */
1174 if (pd24
->current_login_state
!= PDS_PRLI_COMPLETE
&&
1175 pd24
->last_login_state
!= PDS_PRLI_COMPLETE
) {
1176 DEBUG2(printk("%s(%ld): Unable to verify "
1177 "login-state (%x/%x) for loop_id %x\n",
1178 __func__
, vha
->host_no
,
1179 pd24
->current_login_state
,
1180 pd24
->last_login_state
, fcport
->loop_id
));
1181 rval
= QLA_FUNCTION_FAILED
;
1185 /* Names are little-endian. */
1186 memcpy(fcport
->node_name
, pd24
->node_name
, WWN_SIZE
);
1187 memcpy(fcport
->port_name
, pd24
->port_name
, WWN_SIZE
);
1189 /* Get port_id of device. */
1190 fcport
->d_id
.b
.domain
= pd24
->port_id
[0];
1191 fcport
->d_id
.b
.area
= pd24
->port_id
[1];
1192 fcport
->d_id
.b
.al_pa
= pd24
->port_id
[2];
1193 fcport
->d_id
.b
.rsvd_1
= 0;
1195 /* If not target must be initiator or unknown type. */
1196 if ((pd24
->prli_svc_param_word_3
[0] & BIT_4
) == 0)
1197 fcport
->port_type
= FCT_INITIATOR
;
1199 fcport
->port_type
= FCT_TARGET
;
1201 /* Check for logged in state. */
1202 if (pd
->master_state
!= PD_STATE_PORT_LOGGED_IN
&&
1203 pd
->slave_state
!= PD_STATE_PORT_LOGGED_IN
) {
1204 rval
= QLA_FUNCTION_FAILED
;
1208 /* Names are little-endian. */
1209 memcpy(fcport
->node_name
, pd
->node_name
, WWN_SIZE
);
1210 memcpy(fcport
->port_name
, pd
->port_name
, WWN_SIZE
);
1212 /* Get port_id of device. */
1213 fcport
->d_id
.b
.domain
= pd
->port_id
[0];
1214 fcport
->d_id
.b
.area
= pd
->port_id
[3];
1215 fcport
->d_id
.b
.al_pa
= pd
->port_id
[2];
1216 fcport
->d_id
.b
.rsvd_1
= 0;
1218 /* If not target must be initiator or unknown type. */
1219 if ((pd
->prli_svc_param_word_3
[0] & BIT_4
) == 0)
1220 fcport
->port_type
= FCT_INITIATOR
;
1222 fcport
->port_type
= FCT_TARGET
;
1224 /* Passback COS information. */
1225 fcport
->supported_classes
= (pd
->options
& BIT_4
) ?
1226 FC_COS_CLASS2
: FC_COS_CLASS3
;
1230 dma_pool_free(ha
->s_dma_pool
, pd
, pd_dma
);
1232 if (rval
!= QLA_SUCCESS
) {
1233 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
1234 __func__
, vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
1236 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
1243 * qla2x00_get_firmware_state
1244 * Get adapter firmware state.
1247 * ha = adapter block pointer.
1248 * dptr = pointer for firmware state.
1249 * TARGET_QUEUE_LOCK must be released.
1250 * ADAPTER_STATE_LOCK must be released.
1253 * qla2x00 local function return status code.
1259 qla2x00_get_firmware_state(scsi_qla_host_t
*vha
, uint16_t *states
)
1263 mbx_cmd_t
*mcp
= &mc
;
1265 DEBUG11(printk("qla2x00_get_firmware_state(%ld): entered.\n",
1268 mcp
->mb
[0] = MBC_GET_FIRMWARE_STATE
;
1269 mcp
->out_mb
= MBX_0
;
1270 if (IS_FWI2_CAPABLE(vha
->hw
))
1271 mcp
->in_mb
= MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1273 mcp
->in_mb
= MBX_1
|MBX_0
;
1274 mcp
->tov
= MBX_TOV_SECONDS
;
1276 rval
= qla2x00_mailbox_command(vha
, mcp
);
1278 /* Return firmware states. */
1279 states
[0] = mcp
->mb
[1];
1280 if (IS_FWI2_CAPABLE(vha
->hw
)) {
1281 states
[1] = mcp
->mb
[2];
1282 states
[2] = mcp
->mb
[3];
1283 states
[3] = mcp
->mb
[4];
1284 states
[4] = mcp
->mb
[5];
1287 if (rval
!= QLA_SUCCESS
) {
1289 DEBUG2_3_11(printk("qla2x00_get_firmware_state(%ld): "
1290 "failed=%x.\n", vha
->host_no
, rval
));
1293 DEBUG11(printk("qla2x00_get_firmware_state(%ld): done.\n",
1301 * qla2x00_get_port_name
1302 * Issue get port name mailbox command.
1303 * Returned name is in big endian format.
1306 * ha = adapter block pointer.
1307 * loop_id = loop ID of device.
1308 * name = pointer for name.
1309 * TARGET_QUEUE_LOCK must be released.
1310 * ADAPTER_STATE_LOCK must be released.
1313 * qla2x00 local function return status code.
1319 qla2x00_get_port_name(scsi_qla_host_t
*vha
, uint16_t loop_id
, uint8_t *name
,
1324 mbx_cmd_t
*mcp
= &mc
;
1326 DEBUG11(printk("qla2x00_get_port_name(%ld): entered.\n",
1329 mcp
->mb
[0] = MBC_GET_PORT_NAME
;
1330 mcp
->mb
[9] = vha
->vp_idx
;
1331 mcp
->out_mb
= MBX_9
|MBX_1
|MBX_0
;
1332 if (HAS_EXTENDED_IDS(vha
->hw
)) {
1333 mcp
->mb
[1] = loop_id
;
1335 mcp
->out_mb
|= MBX_10
;
1337 mcp
->mb
[1] = loop_id
<< 8 | opt
;
1340 mcp
->in_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1341 mcp
->tov
= MBX_TOV_SECONDS
;
1343 rval
= qla2x00_mailbox_command(vha
, mcp
);
1345 if (rval
!= QLA_SUCCESS
) {
1347 DEBUG2_3_11(printk("qla2x00_get_port_name(%ld): failed=%x.\n",
1348 vha
->host_no
, rval
));
1351 /* This function returns name in big endian. */
1352 name
[0] = MSB(mcp
->mb
[2]);
1353 name
[1] = LSB(mcp
->mb
[2]);
1354 name
[2] = MSB(mcp
->mb
[3]);
1355 name
[3] = LSB(mcp
->mb
[3]);
1356 name
[4] = MSB(mcp
->mb
[6]);
1357 name
[5] = LSB(mcp
->mb
[6]);
1358 name
[6] = MSB(mcp
->mb
[7]);
1359 name
[7] = LSB(mcp
->mb
[7]);
1362 DEBUG11(printk("qla2x00_get_port_name(%ld): done.\n",
1371 * Issue LIP reset mailbox command.
1374 * ha = adapter block pointer.
1375 * TARGET_QUEUE_LOCK must be released.
1376 * ADAPTER_STATE_LOCK must be released.
1379 * qla2x00 local function return status code.
1385 qla2x00_lip_reset(scsi_qla_host_t
*vha
)
1389 mbx_cmd_t
*mcp
= &mc
;
1391 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
1393 if (IS_QLA81XX(vha
->hw
)) {
1394 /* Logout across all FCFs. */
1395 mcp
->mb
[0] = MBC_LIP_FULL_LOGIN
;
1398 mcp
->out_mb
= MBX_2
|MBX_1
|MBX_0
;
1399 } else if (IS_FWI2_CAPABLE(vha
->hw
)) {
1400 mcp
->mb
[0] = MBC_LIP_FULL_LOGIN
;
1403 mcp
->mb
[3] = vha
->hw
->loop_reset_delay
;
1404 mcp
->out_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1406 mcp
->mb
[0] = MBC_LIP_RESET
;
1407 mcp
->out_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1408 if (HAS_EXTENDED_IDS(vha
->hw
)) {
1409 mcp
->mb
[1] = 0x00ff;
1411 mcp
->out_mb
|= MBX_10
;
1413 mcp
->mb
[1] = 0xff00;
1415 mcp
->mb
[2] = vha
->hw
->loop_reset_delay
;
1419 mcp
->tov
= MBX_TOV_SECONDS
;
1421 rval
= qla2x00_mailbox_command(vha
, mcp
);
1423 if (rval
!= QLA_SUCCESS
) {
1425 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n",
1426 __func__
, vha
->host_no
, rval
));
1429 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
1440 * ha = adapter block pointer.
1441 * sns = pointer for command.
1442 * cmd_size = command size.
1443 * buf_size = response/command size.
1444 * TARGET_QUEUE_LOCK must be released.
1445 * ADAPTER_STATE_LOCK must be released.
1448 * qla2x00 local function return status code.
1454 qla2x00_send_sns(scsi_qla_host_t
*vha
, dma_addr_t sns_phys_address
,
1455 uint16_t cmd_size
, size_t buf_size
)
1459 mbx_cmd_t
*mcp
= &mc
;
1461 DEBUG11(printk("qla2x00_send_sns(%ld): entered.\n",
1464 DEBUG11(printk("qla2x00_send_sns: retry cnt=%d ratov=%d total "
1465 "tov=%d.\n", vha
->hw
->retry_count
, vha
->hw
->login_timeout
,
1468 mcp
->mb
[0] = MBC_SEND_SNS_COMMAND
;
1469 mcp
->mb
[1] = cmd_size
;
1470 mcp
->mb
[2] = MSW(sns_phys_address
);
1471 mcp
->mb
[3] = LSW(sns_phys_address
);
1472 mcp
->mb
[6] = MSW(MSD(sns_phys_address
));
1473 mcp
->mb
[7] = LSW(MSD(sns_phys_address
));
1474 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1475 mcp
->in_mb
= MBX_0
|MBX_1
;
1476 mcp
->buf_size
= buf_size
;
1477 mcp
->flags
= MBX_DMA_OUT
|MBX_DMA_IN
;
1478 mcp
->tov
= (vha
->hw
->login_timeout
* 2) + (vha
->hw
->login_timeout
/ 2);
1479 rval
= qla2x00_mailbox_command(vha
, mcp
);
1481 if (rval
!= QLA_SUCCESS
) {
1483 DEBUG(printk("qla2x00_send_sns(%ld): failed=%x mb[0]=%x "
1484 "mb[1]=%x.\n", vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
1485 DEBUG2_3_11(printk("qla2x00_send_sns(%ld): failed=%x mb[0]=%x "
1486 "mb[1]=%x.\n", vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
1489 DEBUG11(printk("qla2x00_send_sns(%ld): done.\n", vha
->host_no
));
1496 qla24xx_login_fabric(scsi_qla_host_t
*vha
, uint16_t loop_id
, uint8_t domain
,
1497 uint8_t area
, uint8_t al_pa
, uint16_t *mb
, uint8_t opt
)
1501 struct logio_entry_24xx
*lg
;
1504 struct qla_hw_data
*ha
= vha
->hw
;
1505 struct req_que
*req
;
1506 struct rsp_que
*rsp
;
1508 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
1510 if (ql2xmultique_tag
)
1511 req
= ha
->req_q_map
[0];
1516 lg
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &lg_dma
);
1518 DEBUG2_3(printk("%s(%ld): failed to allocate Login IOCB.\n",
1519 __func__
, vha
->host_no
));
1520 return QLA_MEMORY_ALLOC_FAILED
;
1522 memset(lg
, 0, sizeof(struct logio_entry_24xx
));
1524 lg
->entry_type
= LOGINOUT_PORT_IOCB_TYPE
;
1525 lg
->entry_count
= 1;
1526 lg
->handle
= MAKE_HANDLE(req
->id
, lg
->handle
);
1527 lg
->nport_handle
= cpu_to_le16(loop_id
);
1528 lg
->control_flags
= __constant_cpu_to_le16(LCF_COMMAND_PLOGI
);
1530 lg
->control_flags
|= __constant_cpu_to_le16(LCF_COND_PLOGI
);
1532 lg
->control_flags
|= __constant_cpu_to_le16(LCF_SKIP_PRLI
);
1533 lg
->port_id
[0] = al_pa
;
1534 lg
->port_id
[1] = area
;
1535 lg
->port_id
[2] = domain
;
1536 lg
->vp_index
= vha
->vp_idx
;
1537 rval
= qla2x00_issue_iocb(vha
, lg
, lg_dma
, 0);
1538 if (rval
!= QLA_SUCCESS
) {
1539 DEBUG2_3_11(printk("%s(%ld): failed to issue Login IOCB "
1540 "(%x).\n", __func__
, vha
->host_no
, rval
));
1541 } else if (lg
->entry_status
!= 0) {
1542 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
1543 "-- error status (%x).\n", __func__
, vha
->host_no
,
1545 rval
= QLA_FUNCTION_FAILED
;
1546 } else if (lg
->comp_status
!= __constant_cpu_to_le16(CS_COMPLETE
)) {
1547 iop
[0] = le32_to_cpu(lg
->io_parameter
[0]);
1548 iop
[1] = le32_to_cpu(lg
->io_parameter
[1]);
1550 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
1551 "-- completion status (%x) ioparam=%x/%x.\n", __func__
,
1552 vha
->host_no
, le16_to_cpu(lg
->comp_status
), iop
[0],
1556 case LSC_SCODE_PORTID_USED
:
1557 mb
[0] = MBS_PORT_ID_USED
;
1558 mb
[1] = LSW(iop
[1]);
1560 case LSC_SCODE_NPORT_USED
:
1561 mb
[0] = MBS_LOOP_ID_USED
;
1563 case LSC_SCODE_NOLINK
:
1564 case LSC_SCODE_NOIOCB
:
1565 case LSC_SCODE_NOXCB
:
1566 case LSC_SCODE_CMD_FAILED
:
1567 case LSC_SCODE_NOFABRIC
:
1568 case LSC_SCODE_FW_NOT_READY
:
1569 case LSC_SCODE_NOT_LOGGED_IN
:
1570 case LSC_SCODE_NOPCB
:
1571 case LSC_SCODE_ELS_REJECT
:
1572 case LSC_SCODE_CMD_PARAM_ERR
:
1573 case LSC_SCODE_NONPORT
:
1574 case LSC_SCODE_LOGGED_IN
:
1575 case LSC_SCODE_NOFLOGI_ACC
:
1577 mb
[0] = MBS_COMMAND_ERROR
;
1581 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
1583 iop
[0] = le32_to_cpu(lg
->io_parameter
[0]);
1585 mb
[0] = MBS_COMMAND_COMPLETE
;
1587 if (iop
[0] & BIT_4
) {
1593 /* Passback COS information. */
1595 if (lg
->io_parameter
[7] || lg
->io_parameter
[8])
1596 mb
[10] |= BIT_0
; /* Class 2. */
1597 if (lg
->io_parameter
[9] || lg
->io_parameter
[10])
1598 mb
[10] |= BIT_1
; /* Class 3. */
1601 dma_pool_free(ha
->s_dma_pool
, lg
, lg_dma
);
1607 * qla2x00_login_fabric
1608 * Issue login fabric port mailbox command.
1611 * ha = adapter block pointer.
1612 * loop_id = device loop ID.
1613 * domain = device domain.
1614 * area = device area.
1615 * al_pa = device AL_PA.
1616 * status = pointer for return status.
1617 * opt = command options.
1618 * TARGET_QUEUE_LOCK must be released.
1619 * ADAPTER_STATE_LOCK must be released.
1622 * qla2x00 local function return status code.
1628 qla2x00_login_fabric(scsi_qla_host_t
*vha
, uint16_t loop_id
, uint8_t domain
,
1629 uint8_t area
, uint8_t al_pa
, uint16_t *mb
, uint8_t opt
)
1633 mbx_cmd_t
*mcp
= &mc
;
1634 struct qla_hw_data
*ha
= vha
->hw
;
1636 DEBUG11(printk("qla2x00_login_fabric(%ld): entered.\n", vha
->host_no
));
1638 mcp
->mb
[0] = MBC_LOGIN_FABRIC_PORT
;
1639 mcp
->out_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1640 if (HAS_EXTENDED_IDS(ha
)) {
1641 mcp
->mb
[1] = loop_id
;
1643 mcp
->out_mb
|= MBX_10
;
1645 mcp
->mb
[1] = (loop_id
<< 8) | opt
;
1647 mcp
->mb
[2] = domain
;
1648 mcp
->mb
[3] = area
<< 8 | al_pa
;
1650 mcp
->in_mb
= MBX_7
|MBX_6
|MBX_2
|MBX_1
|MBX_0
;
1651 mcp
->tov
= (ha
->login_timeout
* 2) + (ha
->login_timeout
/ 2);
1653 rval
= qla2x00_mailbox_command(vha
, mcp
);
1655 /* Return mailbox statuses. */
1662 /* COS retrieved from Get-Port-Database mailbox command. */
1666 if (rval
!= QLA_SUCCESS
) {
1667 /* RLU tmp code: need to change main mailbox_command function to
1668 * return ok even when the mailbox completion value is not
1669 * SUCCESS. The caller needs to be responsible to interpret
1670 * the return values of this mailbox command if we're not
1671 * to change too much of the existing code.
1673 if (mcp
->mb
[0] == 0x4001 || mcp
->mb
[0] == 0x4002 ||
1674 mcp
->mb
[0] == 0x4003 || mcp
->mb
[0] == 0x4005 ||
1675 mcp
->mb
[0] == 0x4006)
1679 DEBUG2_3_11(printk("qla2x00_login_fabric(%ld): failed=%x "
1680 "mb[0]=%x mb[1]=%x mb[2]=%x.\n", vha
->host_no
, rval
,
1681 mcp
->mb
[0], mcp
->mb
[1], mcp
->mb
[2]));
1684 DEBUG11(printk("qla2x00_login_fabric(%ld): done.\n",
1692 * qla2x00_login_local_device
1693 * Issue login loop port mailbox command.
1696 * ha = adapter block pointer.
1697 * loop_id = device loop ID.
1698 * opt = command options.
1701 * Return status code.
1708 qla2x00_login_local_device(scsi_qla_host_t
*vha
, fc_port_t
*fcport
,
1709 uint16_t *mb_ret
, uint8_t opt
)
1713 mbx_cmd_t
*mcp
= &mc
;
1714 struct qla_hw_data
*ha
= vha
->hw
;
1716 if (IS_FWI2_CAPABLE(ha
))
1717 return qla24xx_login_fabric(vha
, fcport
->loop_id
,
1718 fcport
->d_id
.b
.domain
, fcport
->d_id
.b
.area
,
1719 fcport
->d_id
.b
.al_pa
, mb_ret
, opt
);
1721 DEBUG3(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
1723 mcp
->mb
[0] = MBC_LOGIN_LOOP_PORT
;
1724 if (HAS_EXTENDED_IDS(ha
))
1725 mcp
->mb
[1] = fcport
->loop_id
;
1727 mcp
->mb
[1] = fcport
->loop_id
<< 8;
1729 mcp
->out_mb
= MBX_2
|MBX_1
|MBX_0
;
1730 mcp
->in_mb
= MBX_7
|MBX_6
|MBX_1
|MBX_0
;
1731 mcp
->tov
= (ha
->login_timeout
* 2) + (ha
->login_timeout
/ 2);
1733 rval
= qla2x00_mailbox_command(vha
, mcp
);
1735 /* Return mailbox statuses. */
1736 if (mb_ret
!= NULL
) {
1737 mb_ret
[0] = mcp
->mb
[0];
1738 mb_ret
[1] = mcp
->mb
[1];
1739 mb_ret
[6] = mcp
->mb
[6];
1740 mb_ret
[7] = mcp
->mb
[7];
1743 if (rval
!= QLA_SUCCESS
) {
1744 /* AV tmp code: need to change main mailbox_command function to
1745 * return ok even when the mailbox completion value is not
1746 * SUCCESS. The caller needs to be responsible to interpret
1747 * the return values of this mailbox command if we're not
1748 * to change too much of the existing code.
1750 if (mcp
->mb
[0] == 0x4005 || mcp
->mb
[0] == 0x4006)
1753 DEBUG(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x "
1754 "mb[6]=%x mb[7]=%x.\n", __func__
, vha
->host_no
, rval
,
1755 mcp
->mb
[0], mcp
->mb
[1], mcp
->mb
[6], mcp
->mb
[7]));
1756 DEBUG2_3(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x "
1757 "mb[6]=%x mb[7]=%x.\n", __func__
, vha
->host_no
, rval
,
1758 mcp
->mb
[0], mcp
->mb
[1], mcp
->mb
[6], mcp
->mb
[7]));
1761 DEBUG3(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
1768 qla24xx_fabric_logout(scsi_qla_host_t
*vha
, uint16_t loop_id
, uint8_t domain
,
1769 uint8_t area
, uint8_t al_pa
)
1772 struct logio_entry_24xx
*lg
;
1774 struct qla_hw_data
*ha
= vha
->hw
;
1775 struct req_que
*req
;
1776 struct rsp_que
*rsp
;
1778 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
1780 lg
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &lg_dma
);
1782 DEBUG2_3(printk("%s(%ld): failed to allocate Logout IOCB.\n",
1783 __func__
, vha
->host_no
));
1784 return QLA_MEMORY_ALLOC_FAILED
;
1786 memset(lg
, 0, sizeof(struct logio_entry_24xx
));
1788 if (ql2xmaxqueues
> 1)
1789 req
= ha
->req_q_map
[0];
1793 lg
->entry_type
= LOGINOUT_PORT_IOCB_TYPE
;
1794 lg
->entry_count
= 1;
1795 lg
->handle
= MAKE_HANDLE(req
->id
, lg
->handle
);
1796 lg
->nport_handle
= cpu_to_le16(loop_id
);
1798 __constant_cpu_to_le16(LCF_COMMAND_LOGO
|LCF_IMPL_LOGO
);
1799 lg
->port_id
[0] = al_pa
;
1800 lg
->port_id
[1] = area
;
1801 lg
->port_id
[2] = domain
;
1802 lg
->vp_index
= vha
->vp_idx
;
1804 rval
= qla2x00_issue_iocb(vha
, lg
, lg_dma
, 0);
1805 if (rval
!= QLA_SUCCESS
) {
1806 DEBUG2_3_11(printk("%s(%ld): failed to issue Logout IOCB "
1807 "(%x).\n", __func__
, vha
->host_no
, rval
));
1808 } else if (lg
->entry_status
!= 0) {
1809 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
1810 "-- error status (%x).\n", __func__
, vha
->host_no
,
1812 rval
= QLA_FUNCTION_FAILED
;
1813 } else if (lg
->comp_status
!= __constant_cpu_to_le16(CS_COMPLETE
)) {
1814 DEBUG2_3_11(printk("%s(%ld %d): failed to complete IOCB "
1815 "-- completion status (%x) ioparam=%x/%x.\n", __func__
,
1816 vha
->host_no
, vha
->vp_idx
, le16_to_cpu(lg
->comp_status
),
1817 le32_to_cpu(lg
->io_parameter
[0]),
1818 le32_to_cpu(lg
->io_parameter
[1])));
1821 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
1824 dma_pool_free(ha
->s_dma_pool
, lg
, lg_dma
);
1830 * qla2x00_fabric_logout
1831 * Issue logout fabric port mailbox command.
1834 * ha = adapter block pointer.
1835 * loop_id = device loop ID.
1836 * TARGET_QUEUE_LOCK must be released.
1837 * ADAPTER_STATE_LOCK must be released.
1840 * qla2x00 local function return status code.
1846 qla2x00_fabric_logout(scsi_qla_host_t
*vha
, uint16_t loop_id
, uint8_t domain
,
1847 uint8_t area
, uint8_t al_pa
)
1851 mbx_cmd_t
*mcp
= &mc
;
1853 DEBUG11(printk("qla2x00_fabric_logout(%ld): entered.\n",
1856 mcp
->mb
[0] = MBC_LOGOUT_FABRIC_PORT
;
1857 mcp
->out_mb
= MBX_1
|MBX_0
;
1858 if (HAS_EXTENDED_IDS(vha
->hw
)) {
1859 mcp
->mb
[1] = loop_id
;
1861 mcp
->out_mb
|= MBX_10
;
1863 mcp
->mb
[1] = loop_id
<< 8;
1866 mcp
->in_mb
= MBX_1
|MBX_0
;
1867 mcp
->tov
= MBX_TOV_SECONDS
;
1869 rval
= qla2x00_mailbox_command(vha
, mcp
);
1871 if (rval
!= QLA_SUCCESS
) {
1873 DEBUG2_3_11(printk("qla2x00_fabric_logout(%ld): failed=%x "
1874 "mbx1=%x.\n", vha
->host_no
, rval
, mcp
->mb
[1]));
1877 DEBUG11(printk("qla2x00_fabric_logout(%ld): done.\n",
1885 * qla2x00_full_login_lip
1886 * Issue full login LIP mailbox command.
1889 * ha = adapter block pointer.
1890 * TARGET_QUEUE_LOCK must be released.
1891 * ADAPTER_STATE_LOCK must be released.
1894 * qla2x00 local function return status code.
1900 qla2x00_full_login_lip(scsi_qla_host_t
*vha
)
1904 mbx_cmd_t
*mcp
= &mc
;
1906 DEBUG11(printk("qla2x00_full_login_lip(%ld): entered.\n",
1909 mcp
->mb
[0] = MBC_LIP_FULL_LOGIN
;
1910 mcp
->mb
[1] = IS_FWI2_CAPABLE(vha
->hw
) ? BIT_3
: 0;
1913 mcp
->out_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1915 mcp
->tov
= MBX_TOV_SECONDS
;
1917 rval
= qla2x00_mailbox_command(vha
, mcp
);
1919 if (rval
!= QLA_SUCCESS
) {
1921 DEBUG2_3_11(printk("qla2x00_full_login_lip(%ld): failed=%x.\n",
1922 vha
->host_no
, rval
));
1925 DEBUG11(printk("qla2x00_full_login_lip(%ld): done.\n",
1933 * qla2x00_get_id_list
1936 * ha = adapter block pointer.
1939 * qla2x00 local function return status code.
1945 qla2x00_get_id_list(scsi_qla_host_t
*vha
, void *id_list
, dma_addr_t id_list_dma
,
1950 mbx_cmd_t
*mcp
= &mc
;
1952 DEBUG11(printk("qla2x00_get_id_list(%ld): entered.\n",
1955 if (id_list
== NULL
)
1956 return QLA_FUNCTION_FAILED
;
1958 mcp
->mb
[0] = MBC_GET_ID_LIST
;
1959 mcp
->out_mb
= MBX_0
;
1960 if (IS_FWI2_CAPABLE(vha
->hw
)) {
1961 mcp
->mb
[2] = MSW(id_list_dma
);
1962 mcp
->mb
[3] = LSW(id_list_dma
);
1963 mcp
->mb
[6] = MSW(MSD(id_list_dma
));
1964 mcp
->mb
[7] = LSW(MSD(id_list_dma
));
1966 mcp
->mb
[9] = vha
->vp_idx
;
1967 mcp
->out_mb
|= MBX_9
|MBX_8
|MBX_7
|MBX_6
|MBX_3
|MBX_2
;
1969 mcp
->mb
[1] = MSW(id_list_dma
);
1970 mcp
->mb
[2] = LSW(id_list_dma
);
1971 mcp
->mb
[3] = MSW(MSD(id_list_dma
));
1972 mcp
->mb
[6] = LSW(MSD(id_list_dma
));
1973 mcp
->out_mb
|= MBX_6
|MBX_3
|MBX_2
|MBX_1
;
1975 mcp
->in_mb
= MBX_1
|MBX_0
;
1976 mcp
->tov
= MBX_TOV_SECONDS
;
1978 rval
= qla2x00_mailbox_command(vha
, mcp
);
1980 if (rval
!= QLA_SUCCESS
) {
1982 DEBUG2_3_11(printk("qla2x00_get_id_list(%ld): failed=%x.\n",
1983 vha
->host_no
, rval
));
1985 *entries
= mcp
->mb
[1];
1986 DEBUG11(printk("qla2x00_get_id_list(%ld): done.\n",
1994 * qla2x00_get_resource_cnts
1995 * Get current firmware resource counts.
1998 * ha = adapter block pointer.
2001 * qla2x00 local function return status code.
2007 qla2x00_get_resource_cnts(scsi_qla_host_t
*vha
, uint16_t *cur_xchg_cnt
,
2008 uint16_t *orig_xchg_cnt
, uint16_t *cur_iocb_cnt
,
2009 uint16_t *orig_iocb_cnt
, uint16_t *max_npiv_vports
)
2013 mbx_cmd_t
*mcp
= &mc
;
2015 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2017 mcp
->mb
[0] = MBC_GET_RESOURCE_COUNTS
;
2018 mcp
->out_mb
= MBX_0
;
2019 mcp
->in_mb
= MBX_11
|MBX_10
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
2020 mcp
->tov
= MBX_TOV_SECONDS
;
2022 rval
= qla2x00_mailbox_command(vha
, mcp
);
2024 if (rval
!= QLA_SUCCESS
) {
2026 DEBUG2_3_11(printk("%s(%ld): failed = %x.\n", __func__
,
2027 vha
->host_no
, mcp
->mb
[0]));
2029 DEBUG11(printk("%s(%ld): done. mb1=%x mb2=%x mb3=%x mb6=%x "
2030 "mb7=%x mb10=%x mb11=%x.\n", __func__
, vha
->host_no
,
2031 mcp
->mb
[1], mcp
->mb
[2], mcp
->mb
[3], mcp
->mb
[6], mcp
->mb
[7],
2032 mcp
->mb
[10], mcp
->mb
[11]));
2035 *cur_xchg_cnt
= mcp
->mb
[3];
2037 *orig_xchg_cnt
= mcp
->mb
[6];
2039 *cur_iocb_cnt
= mcp
->mb
[7];
2041 *orig_iocb_cnt
= mcp
->mb
[10];
2042 if (vha
->hw
->flags
.npiv_supported
&& max_npiv_vports
)
2043 *max_npiv_vports
= mcp
->mb
[11];
2049 #if defined(QL_DEBUG_LEVEL_3)
2051 * qla2x00_get_fcal_position_map
2052 * Get FCAL (LILP) position map using mailbox command
2055 * ha = adapter state pointer.
2056 * pos_map = buffer pointer (can be NULL).
2059 * qla2x00 local function return status code.
2065 qla2x00_get_fcal_position_map(scsi_qla_host_t
*vha
, char *pos_map
)
2069 mbx_cmd_t
*mcp
= &mc
;
2071 dma_addr_t pmap_dma
;
2072 struct qla_hw_data
*ha
= vha
->hw
;
2074 pmap
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &pmap_dma
);
2076 DEBUG2_3_11(printk("%s(%ld): **** Mem Alloc Failed ****",
2077 __func__
, vha
->host_no
));
2078 return QLA_MEMORY_ALLOC_FAILED
;
2080 memset(pmap
, 0, FCAL_MAP_SIZE
);
2082 mcp
->mb
[0] = MBC_GET_FC_AL_POSITION_MAP
;
2083 mcp
->mb
[2] = MSW(pmap_dma
);
2084 mcp
->mb
[3] = LSW(pmap_dma
);
2085 mcp
->mb
[6] = MSW(MSD(pmap_dma
));
2086 mcp
->mb
[7] = LSW(MSD(pmap_dma
));
2087 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_0
;
2088 mcp
->in_mb
= MBX_1
|MBX_0
;
2089 mcp
->buf_size
= FCAL_MAP_SIZE
;
2090 mcp
->flags
= MBX_DMA_IN
;
2091 mcp
->tov
= (ha
->login_timeout
* 2) + (ha
->login_timeout
/ 2);
2092 rval
= qla2x00_mailbox_command(vha
, mcp
);
2094 if (rval
== QLA_SUCCESS
) {
2095 DEBUG11(printk("%s(%ld): (mb0=%x/mb1=%x) FC/AL Position Map "
2096 "size (%x)\n", __func__
, vha
->host_no
, mcp
->mb
[0],
2097 mcp
->mb
[1], (unsigned)pmap
[0]));
2098 DEBUG11(qla2x00_dump_buffer(pmap
, pmap
[0] + 1));
2101 memcpy(pos_map
, pmap
, FCAL_MAP_SIZE
);
2103 dma_pool_free(ha
->s_dma_pool
, pmap
, pmap_dma
);
2105 if (rval
!= QLA_SUCCESS
) {
2106 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
2107 vha
->host_no
, rval
));
2109 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2117 * qla2x00_get_link_status
2120 * ha = adapter block pointer.
2121 * loop_id = device loop ID.
2122 * ret_buf = pointer to link status return buffer.
2126 * BIT_0 = mem alloc error.
2127 * BIT_1 = mailbox error.
2130 qla2x00_get_link_status(scsi_qla_host_t
*vha
, uint16_t loop_id
,
2131 struct link_statistics
*stats
, dma_addr_t stats_dma
)
2135 mbx_cmd_t
*mcp
= &mc
;
2136 uint32_t *siter
, *diter
, dwords
;
2137 struct qla_hw_data
*ha
= vha
->hw
;
2139 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2141 mcp
->mb
[0] = MBC_GET_LINK_STATUS
;
2142 mcp
->mb
[2] = MSW(stats_dma
);
2143 mcp
->mb
[3] = LSW(stats_dma
);
2144 mcp
->mb
[6] = MSW(MSD(stats_dma
));
2145 mcp
->mb
[7] = LSW(MSD(stats_dma
));
2146 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_0
;
2148 if (IS_FWI2_CAPABLE(ha
)) {
2149 mcp
->mb
[1] = loop_id
;
2152 mcp
->out_mb
|= MBX_10
|MBX_4
|MBX_1
;
2153 mcp
->in_mb
|= MBX_1
;
2154 } else if (HAS_EXTENDED_IDS(ha
)) {
2155 mcp
->mb
[1] = loop_id
;
2157 mcp
->out_mb
|= MBX_10
|MBX_1
;
2159 mcp
->mb
[1] = loop_id
<< 8;
2160 mcp
->out_mb
|= MBX_1
;
2162 mcp
->tov
= MBX_TOV_SECONDS
;
2163 mcp
->flags
= IOCTL_CMD
;
2164 rval
= qla2x00_mailbox_command(vha
, mcp
);
2166 if (rval
== QLA_SUCCESS
) {
2167 if (mcp
->mb
[0] != MBS_COMMAND_COMPLETE
) {
2168 DEBUG2_3_11(printk("%s(%ld): cmd failed. mbx0=%x.\n",
2169 __func__
, vha
->host_no
, mcp
->mb
[0]));
2170 rval
= QLA_FUNCTION_FAILED
;
2172 /* Copy over data -- firmware data is LE. */
2173 dwords
= offsetof(struct link_statistics
, unused1
) / 4;
2174 siter
= diter
= &stats
->link_fail_cnt
;
2176 *diter
++ = le32_to_cpu(*siter
++);
2180 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
2181 vha
->host_no
, rval
));
2188 qla24xx_get_isp_stats(scsi_qla_host_t
*vha
, struct link_statistics
*stats
,
2189 dma_addr_t stats_dma
)
2193 mbx_cmd_t
*mcp
= &mc
;
2194 uint32_t *siter
, *diter
, dwords
;
2196 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2198 mcp
->mb
[0] = MBC_GET_LINK_PRIV_STATS
;
2199 mcp
->mb
[2] = MSW(stats_dma
);
2200 mcp
->mb
[3] = LSW(stats_dma
);
2201 mcp
->mb
[6] = MSW(MSD(stats_dma
));
2202 mcp
->mb
[7] = LSW(MSD(stats_dma
));
2203 mcp
->mb
[8] = sizeof(struct link_statistics
) / 4;
2204 mcp
->mb
[9] = vha
->vp_idx
;
2206 mcp
->out_mb
= MBX_10
|MBX_9
|MBX_8
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_0
;
2207 mcp
->in_mb
= MBX_2
|MBX_1
|MBX_0
;
2208 mcp
->tov
= MBX_TOV_SECONDS
;
2209 mcp
->flags
= IOCTL_CMD
;
2210 rval
= qla2x00_mailbox_command(vha
, mcp
);
2212 if (rval
== QLA_SUCCESS
) {
2213 if (mcp
->mb
[0] != MBS_COMMAND_COMPLETE
) {
2214 DEBUG2_3_11(printk("%s(%ld): cmd failed. mbx0=%x.\n",
2215 __func__
, vha
->host_no
, mcp
->mb
[0]));
2216 rval
= QLA_FUNCTION_FAILED
;
2218 /* Copy over data -- firmware data is LE. */
2219 dwords
= sizeof(struct link_statistics
) / 4;
2220 siter
= diter
= &stats
->link_fail_cnt
;
2222 *diter
++ = le32_to_cpu(*siter
++);
2226 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
2227 vha
->host_no
, rval
));
2234 qla24xx_abort_command(srb_t
*sp
)
2237 unsigned long flags
= 0;
2239 struct abort_entry_24xx
*abt
;
2242 fc_port_t
*fcport
= sp
->fcport
;
2243 struct scsi_qla_host
*vha
= fcport
->vha
;
2244 struct qla_hw_data
*ha
= vha
->hw
;
2245 struct req_que
*req
= vha
->req
;
2247 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2249 spin_lock_irqsave(&ha
->hardware_lock
, flags
);
2250 for (handle
= 1; handle
< MAX_OUTSTANDING_COMMANDS
; handle
++) {
2251 if (req
->outstanding_cmds
[handle
] == sp
)
2254 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
2255 if (handle
== MAX_OUTSTANDING_COMMANDS
) {
2256 /* Command not found. */
2257 return QLA_FUNCTION_FAILED
;
2260 abt
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &abt_dma
);
2262 DEBUG2_3(printk("%s(%ld): failed to allocate Abort IOCB.\n",
2263 __func__
, vha
->host_no
));
2264 return QLA_MEMORY_ALLOC_FAILED
;
2266 memset(abt
, 0, sizeof(struct abort_entry_24xx
));
2268 abt
->entry_type
= ABORT_IOCB_TYPE
;
2269 abt
->entry_count
= 1;
2270 abt
->handle
= MAKE_HANDLE(req
->id
, abt
->handle
);
2271 abt
->nport_handle
= cpu_to_le16(fcport
->loop_id
);
2272 abt
->handle_to_abort
= handle
;
2273 abt
->port_id
[0] = fcport
->d_id
.b
.al_pa
;
2274 abt
->port_id
[1] = fcport
->d_id
.b
.area
;
2275 abt
->port_id
[2] = fcport
->d_id
.b
.domain
;
2276 abt
->vp_index
= fcport
->vp_idx
;
2278 abt
->req_que_no
= cpu_to_le16(req
->id
);
2280 rval
= qla2x00_issue_iocb(vha
, abt
, abt_dma
, 0);
2281 if (rval
!= QLA_SUCCESS
) {
2282 DEBUG2_3_11(printk("%s(%ld): failed to issue IOCB (%x).\n",
2283 __func__
, vha
->host_no
, rval
));
2284 } else if (abt
->entry_status
!= 0) {
2285 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2286 "-- error status (%x).\n", __func__
, vha
->host_no
,
2287 abt
->entry_status
));
2288 rval
= QLA_FUNCTION_FAILED
;
2289 } else if (abt
->nport_handle
!= __constant_cpu_to_le16(0)) {
2290 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2291 "-- completion status (%x).\n", __func__
, vha
->host_no
,
2292 le16_to_cpu(abt
->nport_handle
)));
2293 rval
= QLA_FUNCTION_FAILED
;
2295 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2298 dma_pool_free(ha
->s_dma_pool
, abt
, abt_dma
);
2303 struct tsk_mgmt_cmd
{
2305 struct tsk_mgmt_entry tsk
;
2306 struct sts_entry_24xx sts
;
2311 __qla24xx_issue_tmf(char *name
, uint32_t type
, struct fc_port
*fcport
,
2312 unsigned int l
, int tag
)
2315 struct tsk_mgmt_cmd
*tsk
;
2317 scsi_qla_host_t
*vha
;
2318 struct qla_hw_data
*ha
;
2319 struct req_que
*req
;
2320 struct rsp_que
*rsp
;
2322 DEBUG11(printk("%s(%ld): entered.\n", __func__
, fcport
->vha
->host_no
));
2327 if (ql2xmultique_tag
)
2328 rsp
= ha
->rsp_q_map
[tag
+ 1];
2331 tsk
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &tsk_dma
);
2333 DEBUG2_3(printk("%s(%ld): failed to allocate Task Management "
2334 "IOCB.\n", __func__
, vha
->host_no
));
2335 return QLA_MEMORY_ALLOC_FAILED
;
2337 memset(tsk
, 0, sizeof(struct tsk_mgmt_cmd
));
2339 tsk
->p
.tsk
.entry_type
= TSK_MGMT_IOCB_TYPE
;
2340 tsk
->p
.tsk
.entry_count
= 1;
2341 tsk
->p
.tsk
.handle
= MAKE_HANDLE(req
->id
, tsk
->p
.tsk
.handle
);
2342 tsk
->p
.tsk
.nport_handle
= cpu_to_le16(fcport
->loop_id
);
2343 tsk
->p
.tsk
.timeout
= cpu_to_le16(ha
->r_a_tov
/ 10 * 2);
2344 tsk
->p
.tsk
.control_flags
= cpu_to_le32(type
);
2345 tsk
->p
.tsk
.port_id
[0] = fcport
->d_id
.b
.al_pa
;
2346 tsk
->p
.tsk
.port_id
[1] = fcport
->d_id
.b
.area
;
2347 tsk
->p
.tsk
.port_id
[2] = fcport
->d_id
.b
.domain
;
2348 tsk
->p
.tsk
.vp_index
= fcport
->vp_idx
;
2349 if (type
== TCF_LUN_RESET
) {
2350 int_to_scsilun(l
, &tsk
->p
.tsk
.lun
);
2351 host_to_fcp_swap((uint8_t *)&tsk
->p
.tsk
.lun
,
2352 sizeof(tsk
->p
.tsk
.lun
));
2355 rval
= qla2x00_issue_iocb(vha
, tsk
, tsk_dma
, 0);
2356 if (rval
!= QLA_SUCCESS
) {
2357 DEBUG2_3_11(printk("%s(%ld): failed to issue %s Reset IOCB "
2358 "(%x).\n", __func__
, vha
->host_no
, name
, rval
));
2359 } else if (tsk
->p
.sts
.entry_status
!= 0) {
2360 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2361 "-- error status (%x).\n", __func__
, vha
->host_no
,
2362 tsk
->p
.sts
.entry_status
));
2363 rval
= QLA_FUNCTION_FAILED
;
2364 } else if (tsk
->p
.sts
.comp_status
!=
2365 __constant_cpu_to_le16(CS_COMPLETE
)) {
2366 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2367 "-- completion status (%x).\n", __func__
,
2368 vha
->host_no
, le16_to_cpu(tsk
->p
.sts
.comp_status
)));
2369 rval
= QLA_FUNCTION_FAILED
;
2372 /* Issue marker IOCB. */
2373 rval2
= qla2x00_marker(vha
, req
, rsp
, fcport
->loop_id
, l
,
2374 type
== TCF_LUN_RESET
? MK_SYNC_ID_LUN
: MK_SYNC_ID
);
2375 if (rval2
!= QLA_SUCCESS
) {
2376 DEBUG2_3_11(printk("%s(%ld): failed to issue Marker IOCB "
2377 "(%x).\n", __func__
, vha
->host_no
, rval2
));
2379 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2382 dma_pool_free(ha
->s_dma_pool
, tsk
, tsk_dma
);
2388 qla24xx_abort_target(struct fc_port
*fcport
, unsigned int l
, int tag
)
2390 return __qla24xx_issue_tmf("Target", TCF_TARGET_RESET
, fcport
, l
, tag
);
2394 qla24xx_lun_reset(struct fc_port
*fcport
, unsigned int l
, int tag
)
2396 return __qla24xx_issue_tmf("Lun", TCF_LUN_RESET
, fcport
, l
, tag
);
2400 qla2x00_system_error(scsi_qla_host_t
*vha
)
2404 mbx_cmd_t
*mcp
= &mc
;
2405 struct qla_hw_data
*ha
= vha
->hw
;
2407 if (!IS_QLA23XX(ha
) && !IS_FWI2_CAPABLE(ha
))
2408 return QLA_FUNCTION_FAILED
;
2410 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2412 mcp
->mb
[0] = MBC_GEN_SYSTEM_ERROR
;
2413 mcp
->out_mb
= MBX_0
;
2417 rval
= qla2x00_mailbox_command(vha
, mcp
);
2419 if (rval
!= QLA_SUCCESS
) {
2420 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
2421 vha
->host_no
, rval
));
2423 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2430 * qla2x00_set_serdes_params() -
2436 qla2x00_set_serdes_params(scsi_qla_host_t
*vha
, uint16_t sw_em_1g
,
2437 uint16_t sw_em_2g
, uint16_t sw_em_4g
)
2441 mbx_cmd_t
*mcp
= &mc
;
2443 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2445 mcp
->mb
[0] = MBC_SERDES_PARAMS
;
2447 mcp
->mb
[2] = sw_em_1g
| BIT_15
;
2448 mcp
->mb
[3] = sw_em_2g
| BIT_15
;
2449 mcp
->mb
[4] = sw_em_4g
| BIT_15
;
2450 mcp
->out_mb
= MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
2452 mcp
->tov
= MBX_TOV_SECONDS
;
2454 rval
= qla2x00_mailbox_command(vha
, mcp
);
2456 if (rval
!= QLA_SUCCESS
) {
2458 DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__
,
2459 vha
->host_no
, rval
, mcp
->mb
[0]));
2462 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2469 qla2x00_stop_firmware(scsi_qla_host_t
*vha
)
2473 mbx_cmd_t
*mcp
= &mc
;
2475 if (!IS_FWI2_CAPABLE(vha
->hw
))
2476 return QLA_FUNCTION_FAILED
;
2478 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2480 mcp
->mb
[0] = MBC_STOP_FIRMWARE
;
2481 mcp
->out_mb
= MBX_0
;
2485 rval
= qla2x00_mailbox_command(vha
, mcp
);
2487 if (rval
!= QLA_SUCCESS
) {
2488 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
2489 vha
->host_no
, rval
));
2490 if (mcp
->mb
[0] == MBS_INVALID_COMMAND
)
2491 rval
= QLA_INVALID_COMMAND
;
2493 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2500 qla2x00_enable_eft_trace(scsi_qla_host_t
*vha
, dma_addr_t eft_dma
,
2505 mbx_cmd_t
*mcp
= &mc
;
2507 if (!IS_FWI2_CAPABLE(vha
->hw
))
2508 return QLA_FUNCTION_FAILED
;
2510 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2512 mcp
->mb
[0] = MBC_TRACE_CONTROL
;
2513 mcp
->mb
[1] = TC_EFT_ENABLE
;
2514 mcp
->mb
[2] = LSW(eft_dma
);
2515 mcp
->mb
[3] = MSW(eft_dma
);
2516 mcp
->mb
[4] = LSW(MSD(eft_dma
));
2517 mcp
->mb
[5] = MSW(MSD(eft_dma
));
2518 mcp
->mb
[6] = buffers
;
2519 mcp
->mb
[7] = TC_AEN_DISABLE
;
2520 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
2521 mcp
->in_mb
= MBX_1
|MBX_0
;
2522 mcp
->tov
= MBX_TOV_SECONDS
;
2524 rval
= qla2x00_mailbox_command(vha
, mcp
);
2525 if (rval
!= QLA_SUCCESS
) {
2526 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
2527 __func__
, vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
2529 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2536 qla2x00_disable_eft_trace(scsi_qla_host_t
*vha
)
2540 mbx_cmd_t
*mcp
= &mc
;
2542 if (!IS_FWI2_CAPABLE(vha
->hw
))
2543 return QLA_FUNCTION_FAILED
;
2545 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2547 mcp
->mb
[0] = MBC_TRACE_CONTROL
;
2548 mcp
->mb
[1] = TC_EFT_DISABLE
;
2549 mcp
->out_mb
= MBX_1
|MBX_0
;
2550 mcp
->in_mb
= MBX_1
|MBX_0
;
2551 mcp
->tov
= MBX_TOV_SECONDS
;
2553 rval
= qla2x00_mailbox_command(vha
, mcp
);
2554 if (rval
!= QLA_SUCCESS
) {
2555 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
2556 __func__
, vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
2558 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2565 qla2x00_enable_fce_trace(scsi_qla_host_t
*vha
, dma_addr_t fce_dma
,
2566 uint16_t buffers
, uint16_t *mb
, uint32_t *dwords
)
2570 mbx_cmd_t
*mcp
= &mc
;
2572 if (!IS_QLA25XX(vha
->hw
) && !IS_QLA81XX(vha
->hw
))
2573 return QLA_FUNCTION_FAILED
;
2575 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2577 mcp
->mb
[0] = MBC_TRACE_CONTROL
;
2578 mcp
->mb
[1] = TC_FCE_ENABLE
;
2579 mcp
->mb
[2] = LSW(fce_dma
);
2580 mcp
->mb
[3] = MSW(fce_dma
);
2581 mcp
->mb
[4] = LSW(MSD(fce_dma
));
2582 mcp
->mb
[5] = MSW(MSD(fce_dma
));
2583 mcp
->mb
[6] = buffers
;
2584 mcp
->mb
[7] = TC_AEN_DISABLE
;
2586 mcp
->mb
[9] = TC_FCE_DEFAULT_RX_SIZE
;
2587 mcp
->mb
[10] = TC_FCE_DEFAULT_TX_SIZE
;
2588 mcp
->out_mb
= MBX_10
|MBX_9
|MBX_8
|MBX_7
|MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|
2590 mcp
->in_mb
= MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
2591 mcp
->tov
= MBX_TOV_SECONDS
;
2593 rval
= qla2x00_mailbox_command(vha
, mcp
);
2594 if (rval
!= QLA_SUCCESS
) {
2595 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
2596 __func__
, vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
2598 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2601 memcpy(mb
, mcp
->mb
, 8 * sizeof(*mb
));
2610 qla2x00_disable_fce_trace(scsi_qla_host_t
*vha
, uint64_t *wr
, uint64_t *rd
)
2614 mbx_cmd_t
*mcp
= &mc
;
2616 if (!IS_FWI2_CAPABLE(vha
->hw
))
2617 return QLA_FUNCTION_FAILED
;
2619 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2621 mcp
->mb
[0] = MBC_TRACE_CONTROL
;
2622 mcp
->mb
[1] = TC_FCE_DISABLE
;
2623 mcp
->mb
[2] = TC_FCE_DISABLE_TRACE
;
2624 mcp
->out_mb
= MBX_2
|MBX_1
|MBX_0
;
2625 mcp
->in_mb
= MBX_9
|MBX_8
|MBX_7
|MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|
2627 mcp
->tov
= MBX_TOV_SECONDS
;
2629 rval
= qla2x00_mailbox_command(vha
, mcp
);
2630 if (rval
!= QLA_SUCCESS
) {
2631 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
2632 __func__
, vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
2634 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2637 *wr
= (uint64_t) mcp
->mb
[5] << 48 |
2638 (uint64_t) mcp
->mb
[4] << 32 |
2639 (uint64_t) mcp
->mb
[3] << 16 |
2640 (uint64_t) mcp
->mb
[2];
2642 *rd
= (uint64_t) mcp
->mb
[9] << 48 |
2643 (uint64_t) mcp
->mb
[8] << 32 |
2644 (uint64_t) mcp
->mb
[7] << 16 |
2645 (uint64_t) mcp
->mb
[6];
2652 qla2x00_read_sfp(scsi_qla_host_t
*vha
, dma_addr_t sfp_dma
, uint16_t addr
,
2653 uint16_t off
, uint16_t count
)
2657 mbx_cmd_t
*mcp
= &mc
;
2659 if (!IS_FWI2_CAPABLE(vha
->hw
))
2660 return QLA_FUNCTION_FAILED
;
2662 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2664 mcp
->mb
[0] = MBC_READ_SFP
;
2666 mcp
->mb
[2] = MSW(sfp_dma
);
2667 mcp
->mb
[3] = LSW(sfp_dma
);
2668 mcp
->mb
[6] = MSW(MSD(sfp_dma
));
2669 mcp
->mb
[7] = LSW(MSD(sfp_dma
));
2673 mcp
->out_mb
= MBX_10
|MBX_9
|MBX_8
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
2675 mcp
->tov
= MBX_TOV_SECONDS
;
2677 rval
= qla2x00_mailbox_command(vha
, mcp
);
2679 if (rval
!= QLA_SUCCESS
) {
2680 DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__
,
2681 vha
->host_no
, rval
, mcp
->mb
[0]));
2683 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2690 qla2x00_set_idma_speed(scsi_qla_host_t
*vha
, uint16_t loop_id
,
2691 uint16_t port_speed
, uint16_t *mb
)
2695 mbx_cmd_t
*mcp
= &mc
;
2697 if (!IS_IIDMA_CAPABLE(vha
->hw
))
2698 return QLA_FUNCTION_FAILED
;
2700 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2702 mcp
->mb
[0] = MBC_PORT_PARAMS
;
2703 mcp
->mb
[1] = loop_id
;
2705 if (IS_QLA81XX(vha
->hw
))
2706 mcp
->mb
[3] = port_speed
& (BIT_5
|BIT_4
|BIT_3
|BIT_2
|BIT_1
|BIT_0
);
2708 mcp
->mb
[3] = port_speed
& (BIT_2
|BIT_1
|BIT_0
);
2709 mcp
->mb
[9] = vha
->vp_idx
;
2710 mcp
->out_mb
= MBX_9
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
2711 mcp
->in_mb
= MBX_3
|MBX_1
|MBX_0
;
2712 mcp
->tov
= MBX_TOV_SECONDS
;
2714 rval
= qla2x00_mailbox_command(vha
, mcp
);
2716 /* Return mailbox statuses. */
2723 if (rval
!= QLA_SUCCESS
) {
2724 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
2725 vha
->host_no
, rval
));
2727 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2734 qla24xx_report_id_acquisition(scsi_qla_host_t
*vha
,
2735 struct vp_rpt_id_entry_24xx
*rptid_entry
)
2738 uint16_t stat
= le16_to_cpu(rptid_entry
->vp_idx
);
2739 struct qla_hw_data
*ha
= vha
->hw
;
2740 scsi_qla_host_t
*vp
;
2741 scsi_qla_host_t
*tvp
;
2743 if (rptid_entry
->entry_status
!= 0)
2746 if (rptid_entry
->format
== 0) {
2747 DEBUG15(printk("%s:format 0 : scsi(%ld) number of VPs setup %d,"
2748 " number of VPs acquired %d\n", __func__
, vha
->host_no
,
2749 MSB(rptid_entry
->vp_count
), LSB(rptid_entry
->vp_count
)));
2750 DEBUG15(printk("%s primary port id %02x%02x%02x\n", __func__
,
2751 rptid_entry
->port_id
[2], rptid_entry
->port_id
[1],
2752 rptid_entry
->port_id
[0]));
2753 } else if (rptid_entry
->format
== 1) {
2755 DEBUG15(printk("%s:format 1: scsi(%ld): VP[%d] enabled "
2757 "with port id %02x%02x%02x\n", __func__
, vha
->host_no
,
2759 rptid_entry
->port_id
[2], rptid_entry
->port_id
[1],
2760 rptid_entry
->port_id
[0]));
2764 if (MSB(stat
) == 1) {
2765 DEBUG2(printk("scsi(%ld): Could not acquire ID for "
2766 "VP[%d].\n", vha
->host_no
, vp_idx
));
2770 list_for_each_entry_safe(vp
, tvp
, &ha
->vp_list
, list
)
2771 if (vp_idx
== vp
->vp_idx
)
2776 vp
->d_id
.b
.domain
= rptid_entry
->port_id
[2];
2777 vp
->d_id
.b
.area
= rptid_entry
->port_id
[1];
2778 vp
->d_id
.b
.al_pa
= rptid_entry
->port_id
[0];
2781 * Cannot configure here as we are still sitting on the
2782 * response queue. Handle it in dpc context.
2784 set_bit(VP_IDX_ACQUIRED
, &vp
->vp_flags
);
2785 set_bit(VP_DPC_NEEDED
, &vha
->dpc_flags
);
2787 qla2xxx_wake_dpc(vha
);
2792 * qla24xx_modify_vp_config
2793 * Change VP configuration for vha
2796 * vha = adapter block pointer.
2799 * qla2xxx local function return status code.
2805 qla24xx_modify_vp_config(scsi_qla_host_t
*vha
)
2808 struct vp_config_entry_24xx
*vpmod
;
2809 dma_addr_t vpmod_dma
;
2810 struct qla_hw_data
*ha
= vha
->hw
;
2811 struct scsi_qla_host
*base_vha
= pci_get_drvdata(ha
->pdev
);
2813 /* This can be called by the parent */
2815 vpmod
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &vpmod_dma
);
2817 DEBUG2_3(printk("%s(%ld): failed to allocate Modify VP "
2818 "IOCB.\n", __func__
, vha
->host_no
));
2819 return QLA_MEMORY_ALLOC_FAILED
;
2822 memset(vpmod
, 0, sizeof(struct vp_config_entry_24xx
));
2823 vpmod
->entry_type
= VP_CONFIG_IOCB_TYPE
;
2824 vpmod
->entry_count
= 1;
2825 vpmod
->command
= VCT_COMMAND_MOD_ENABLE_VPS
;
2826 vpmod
->vp_count
= 1;
2827 vpmod
->vp_index1
= vha
->vp_idx
;
2828 vpmod
->options_idx1
= BIT_3
|BIT_4
|BIT_5
;
2829 memcpy(vpmod
->node_name_idx1
, vha
->node_name
, WWN_SIZE
);
2830 memcpy(vpmod
->port_name_idx1
, vha
->port_name
, WWN_SIZE
);
2831 vpmod
->entry_count
= 1;
2833 rval
= qla2x00_issue_iocb(base_vha
, vpmod
, vpmod_dma
, 0);
2834 if (rval
!= QLA_SUCCESS
) {
2835 DEBUG2_3_11(printk("%s(%ld): failed to issue VP config IOCB"
2836 "(%x).\n", __func__
, base_vha
->host_no
, rval
));
2837 } else if (vpmod
->comp_status
!= 0) {
2838 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2839 "-- error status (%x).\n", __func__
, base_vha
->host_no
,
2840 vpmod
->comp_status
));
2841 rval
= QLA_FUNCTION_FAILED
;
2842 } else if (vpmod
->comp_status
!= __constant_cpu_to_le16(CS_COMPLETE
)) {
2843 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2844 "-- completion status (%x).\n", __func__
, base_vha
->host_no
,
2845 le16_to_cpu(vpmod
->comp_status
)));
2846 rval
= QLA_FUNCTION_FAILED
;
2849 DEBUG11(printk("%s(%ld): done.\n", __func__
,
2850 base_vha
->host_no
));
2851 fc_vport_set_state(vha
->fc_vport
, FC_VPORT_INITIALIZING
);
2853 dma_pool_free(ha
->s_dma_pool
, vpmod
, vpmod_dma
);
2859 * qla24xx_control_vp
2860 * Enable a virtual port for given host
2863 * ha = adapter block pointer.
2864 * vhba = virtual adapter (unused)
2865 * index = index number for enabled VP
2868 * qla2xxx local function return status code.
2874 qla24xx_control_vp(scsi_qla_host_t
*vha
, int cmd
)
2878 struct vp_ctrl_entry_24xx
*vce
;
2880 struct qla_hw_data
*ha
= vha
->hw
;
2881 int vp_index
= vha
->vp_idx
;
2882 struct scsi_qla_host
*base_vha
= pci_get_drvdata(ha
->pdev
);
2884 DEBUG11(printk("%s(%ld): entered. Enabling index %d\n", __func__
,
2885 vha
->host_no
, vp_index
));
2887 if (vp_index
== 0 || vp_index
>= ha
->max_npiv_vports
)
2888 return QLA_PARAMETER_ERROR
;
2890 vce
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &vce_dma
);
2892 DEBUG2_3(printk("%s(%ld): "
2893 "failed to allocate VP Control IOCB.\n", __func__
,
2894 base_vha
->host_no
));
2895 return QLA_MEMORY_ALLOC_FAILED
;
2897 memset(vce
, 0, sizeof(struct vp_ctrl_entry_24xx
));
2899 vce
->entry_type
= VP_CTRL_IOCB_TYPE
;
2900 vce
->entry_count
= 1;
2901 vce
->command
= cpu_to_le16(cmd
);
2902 vce
->vp_count
= __constant_cpu_to_le16(1);
2904 /* index map in firmware starts with 1; decrement index
2905 * this is ok as we never use index 0
2907 map
= (vp_index
- 1) / 8;
2908 pos
= (vp_index
- 1) & 7;
2909 mutex_lock(&ha
->vport_lock
);
2910 vce
->vp_idx_map
[map
] |= 1 << pos
;
2911 mutex_unlock(&ha
->vport_lock
);
2913 rval
= qla2x00_issue_iocb(base_vha
, vce
, vce_dma
, 0);
2914 if (rval
!= QLA_SUCCESS
) {
2915 DEBUG2_3_11(printk("%s(%ld): failed to issue VP control IOCB"
2916 "(%x).\n", __func__
, base_vha
->host_no
, rval
));
2917 printk("%s(%ld): failed to issue VP control IOCB"
2918 "(%x).\n", __func__
, base_vha
->host_no
, rval
);
2919 } else if (vce
->entry_status
!= 0) {
2920 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2921 "-- error status (%x).\n", __func__
, base_vha
->host_no
,
2922 vce
->entry_status
));
2923 printk("%s(%ld): failed to complete IOCB "
2924 "-- error status (%x).\n", __func__
, base_vha
->host_no
,
2926 rval
= QLA_FUNCTION_FAILED
;
2927 } else if (vce
->comp_status
!= __constant_cpu_to_le16(CS_COMPLETE
)) {
2928 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2929 "-- completion status (%x).\n", __func__
, base_vha
->host_no
,
2930 le16_to_cpu(vce
->comp_status
)));
2931 printk("%s(%ld): failed to complete IOCB "
2932 "-- completion status (%x).\n", __func__
, base_vha
->host_no
,
2933 le16_to_cpu(vce
->comp_status
));
2934 rval
= QLA_FUNCTION_FAILED
;
2936 DEBUG2(printk("%s(%ld): done.\n", __func__
, base_vha
->host_no
));
2939 dma_pool_free(ha
->s_dma_pool
, vce
, vce_dma
);
2945 * qla2x00_send_change_request
2946 * Receive or disable RSCN request from fabric controller
2949 * ha = adapter block pointer
2950 * format = registration format:
2952 * 1 - Fabric detected registration
2953 * 2 - N_port detected registration
2954 * 3 - Full registration
2955 * FF - clear registration
2956 * vp_idx = Virtual port index
2959 * qla2x00 local function return status code.
2966 qla2x00_send_change_request(scsi_qla_host_t
*vha
, uint16_t format
,
2971 mbx_cmd_t
*mcp
= &mc
;
2974 * This command is implicitly executed by firmware during login for the
2978 return QLA_FUNCTION_FAILED
;
2980 mcp
->mb
[0] = MBC_SEND_CHANGE_REQUEST
;
2981 mcp
->mb
[1] = format
;
2982 mcp
->mb
[9] = vp_idx
;
2983 mcp
->out_mb
= MBX_9
|MBX_1
|MBX_0
;
2984 mcp
->in_mb
= MBX_0
|MBX_1
;
2985 mcp
->tov
= MBX_TOV_SECONDS
;
2987 rval
= qla2x00_mailbox_command(vha
, mcp
);
2989 if (rval
== QLA_SUCCESS
) {
2990 if (mcp
->mb
[0] != MBS_COMMAND_COMPLETE
) {
3000 qla2x00_dump_ram(scsi_qla_host_t
*vha
, dma_addr_t req_dma
, uint32_t addr
,
3005 mbx_cmd_t
*mcp
= &mc
;
3007 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3009 if (MSW(addr
) || IS_FWI2_CAPABLE(vha
->hw
)) {
3010 mcp
->mb
[0] = MBC_DUMP_RISC_RAM_EXTENDED
;
3011 mcp
->mb
[8] = MSW(addr
);
3012 mcp
->out_mb
= MBX_8
|MBX_0
;
3014 mcp
->mb
[0] = MBC_DUMP_RISC_RAM
;
3015 mcp
->out_mb
= MBX_0
;
3017 mcp
->mb
[1] = LSW(addr
);
3018 mcp
->mb
[2] = MSW(req_dma
);
3019 mcp
->mb
[3] = LSW(req_dma
);
3020 mcp
->mb
[6] = MSW(MSD(req_dma
));
3021 mcp
->mb
[7] = LSW(MSD(req_dma
));
3022 mcp
->out_mb
|= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
;
3023 if (IS_FWI2_CAPABLE(vha
->hw
)) {
3024 mcp
->mb
[4] = MSW(size
);
3025 mcp
->mb
[5] = LSW(size
);
3026 mcp
->out_mb
|= MBX_5
|MBX_4
;
3028 mcp
->mb
[4] = LSW(size
);
3029 mcp
->out_mb
|= MBX_4
;
3033 mcp
->tov
= MBX_TOV_SECONDS
;
3035 rval
= qla2x00_mailbox_command(vha
, mcp
);
3037 if (rval
!= QLA_SUCCESS
) {
3038 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__
,
3039 vha
->host_no
, rval
, mcp
->mb
[0]));
3041 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
3047 /* 84XX Support **************************************************************/
3049 struct cs84xx_mgmt_cmd
{
3051 struct verify_chip_entry_84xx req
;
3052 struct verify_chip_rsp_84xx rsp
;
3057 qla84xx_verify_chip(struct scsi_qla_host
*vha
, uint16_t *status
)
3060 struct cs84xx_mgmt_cmd
*mn
;
3063 unsigned long flags
;
3064 struct qla_hw_data
*ha
= vha
->hw
;
3066 DEBUG16(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3068 mn
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &mn_dma
);
3070 DEBUG2_3(printk("%s(%ld): failed to allocate Verify ISP84XX "
3071 "IOCB.\n", __func__
, vha
->host_no
));
3072 return QLA_MEMORY_ALLOC_FAILED
;
3076 options
= ha
->cs84xx
->fw_update
? VCO_FORCE_UPDATE
: 0;
3077 /* Diagnostic firmware? */
3078 /* options |= MENLO_DIAG_FW; */
3079 /* We update the firmware with only one data sequence. */
3080 options
|= VCO_END_OF_DATA
;
3084 memset(mn
, 0, sizeof(*mn
));
3085 mn
->p
.req
.entry_type
= VERIFY_CHIP_IOCB_TYPE
;
3086 mn
->p
.req
.entry_count
= 1;
3087 mn
->p
.req
.options
= cpu_to_le16(options
);
3089 DEBUG16(printk("%s(%ld): Dump of Verify Request.\n", __func__
,
3091 DEBUG16(qla2x00_dump_buffer((uint8_t *)mn
,
3094 rval
= qla2x00_issue_iocb_timeout(vha
, mn
, mn_dma
, 0, 120);
3095 if (rval
!= QLA_SUCCESS
) {
3096 DEBUG2_16(printk("%s(%ld): failed to issue Verify "
3097 "IOCB (%x).\n", __func__
, vha
->host_no
, rval
));
3101 DEBUG16(printk("%s(%ld): Dump of Verify Response.\n", __func__
,
3103 DEBUG16(qla2x00_dump_buffer((uint8_t *)mn
,
3106 status
[0] = le16_to_cpu(mn
->p
.rsp
.comp_status
);
3107 status
[1] = status
[0] == CS_VCS_CHIP_FAILURE
?
3108 le16_to_cpu(mn
->p
.rsp
.failure_code
) : 0;
3109 DEBUG2_16(printk("%s(%ld): cs=%x fc=%x\n", __func__
,
3110 vha
->host_no
, status
[0], status
[1]));
3112 if (status
[0] != CS_COMPLETE
) {
3113 rval
= QLA_FUNCTION_FAILED
;
3114 if (!(options
& VCO_DONT_UPDATE_FW
)) {
3115 DEBUG2_16(printk("%s(%ld): Firmware update "
3116 "failed. Retrying without update "
3117 "firmware.\n", __func__
, vha
->host_no
));
3118 options
|= VCO_DONT_UPDATE_FW
;
3119 options
&= ~VCO_FORCE_UPDATE
;
3123 DEBUG2_16(printk("%s(%ld): firmware updated to %x.\n",
3124 __func__
, vha
->host_no
,
3125 le32_to_cpu(mn
->p
.rsp
.fw_ver
)));
3127 /* NOTE: we only update OP firmware. */
3128 spin_lock_irqsave(&ha
->cs84xx
->access_lock
, flags
);
3129 ha
->cs84xx
->op_fw_version
=
3130 le32_to_cpu(mn
->p
.rsp
.fw_ver
);
3131 spin_unlock_irqrestore(&ha
->cs84xx
->access_lock
,
3137 dma_pool_free(ha
->s_dma_pool
, mn
, mn_dma
);
3139 if (rval
!= QLA_SUCCESS
) {
3140 DEBUG2_16(printk("%s(%ld): failed=%x.\n", __func__
,
3141 vha
->host_no
, rval
));
3143 DEBUG16(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
3150 qla25xx_init_req_que(struct scsi_qla_host
*vha
, struct req_que
*req
)
3153 unsigned long flags
;
3155 mbx_cmd_t
*mcp
= &mc
;
3156 struct device_reg_25xxmq __iomem
*reg
;
3157 struct qla_hw_data
*ha
= vha
->hw
;
3159 mcp
->mb
[0] = MBC_INITIALIZE_MULTIQ
;
3160 mcp
->mb
[1] = req
->options
;
3161 mcp
->mb
[2] = MSW(LSD(req
->dma
));
3162 mcp
->mb
[3] = LSW(LSD(req
->dma
));
3163 mcp
->mb
[6] = MSW(MSD(req
->dma
));
3164 mcp
->mb
[7] = LSW(MSD(req
->dma
));
3165 mcp
->mb
[5] = req
->length
;
3167 mcp
->mb
[10] = req
->rsp
->id
;
3168 mcp
->mb
[12] = req
->qos
;
3169 mcp
->mb
[11] = req
->vp_idx
;
3170 mcp
->mb
[13] = req
->rid
;
3172 reg
= (struct device_reg_25xxmq
*)((void *)(ha
->mqiobase
) +
3173 QLA_QUE_PAGE
* req
->id
);
3175 mcp
->mb
[4] = req
->id
;
3176 /* que in ptr index */
3178 /* que out ptr index */
3180 mcp
->out_mb
= MBX_14
|MBX_13
|MBX_12
|MBX_11
|MBX_10
|MBX_9
|MBX_8
|MBX_7
|
3181 MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
3183 mcp
->flags
= MBX_DMA_OUT
;
3186 spin_lock_irqsave(&ha
->hardware_lock
, flags
);
3187 if (!(req
->options
& BIT_0
)) {
3188 WRT_REG_DWORD(®
->req_q_in
, 0);
3189 WRT_REG_DWORD(®
->req_q_out
, 0);
3191 req
->req_q_in
= ®
->req_q_in
;
3192 req
->req_q_out
= ®
->req_q_out
;
3193 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
3195 rval
= qla2x00_mailbox_command(vha
, mcp
);
3196 if (rval
!= QLA_SUCCESS
)
3197 DEBUG2_3_11(printk(KERN_WARNING
"%s(%ld): failed=%x mb0=%x.\n",
3198 __func__
, vha
->host_no
, rval
, mcp
->mb
[0]));
3203 qla25xx_init_rsp_que(struct scsi_qla_host
*vha
, struct rsp_que
*rsp
)
3206 unsigned long flags
;
3208 mbx_cmd_t
*mcp
= &mc
;
3209 struct device_reg_25xxmq __iomem
*reg
;
3210 struct qla_hw_data
*ha
= vha
->hw
;
3212 mcp
->mb
[0] = MBC_INITIALIZE_MULTIQ
;
3213 mcp
->mb
[1] = rsp
->options
;
3214 mcp
->mb
[2] = MSW(LSD(rsp
->dma
));
3215 mcp
->mb
[3] = LSW(LSD(rsp
->dma
));
3216 mcp
->mb
[6] = MSW(MSD(rsp
->dma
));
3217 mcp
->mb
[7] = LSW(MSD(rsp
->dma
));
3218 mcp
->mb
[5] = rsp
->length
;
3219 mcp
->mb
[14] = rsp
->msix
->entry
;
3220 mcp
->mb
[13] = rsp
->rid
;
3222 reg
= (struct device_reg_25xxmq
*)((void *)(ha
->mqiobase
) +
3223 QLA_QUE_PAGE
* rsp
->id
);
3225 mcp
->mb
[4] = rsp
->id
;
3226 /* que in ptr index */
3228 /* que out ptr index */
3230 mcp
->out_mb
= MBX_14
|MBX_13
|MBX_9
|MBX_8
|MBX_7
3231 |MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
3233 mcp
->flags
= MBX_DMA_OUT
;
3236 spin_lock_irqsave(&ha
->hardware_lock
, flags
);
3237 if (!(rsp
->options
& BIT_0
)) {
3238 WRT_REG_DWORD(®
->rsp_q_out
, 0);
3239 WRT_REG_DWORD(®
->rsp_q_in
, 0);
3242 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
3244 rval
= qla2x00_mailbox_command(vha
, mcp
);
3245 if (rval
!= QLA_SUCCESS
)
3246 DEBUG2_3_11(printk(KERN_WARNING
"%s(%ld): failed=%x "
3247 "mb0=%x.\n", __func__
,
3248 vha
->host_no
, rval
, mcp
->mb
[0]));
3253 qla81xx_idc_ack(scsi_qla_host_t
*vha
, uint16_t *mb
)
3257 mbx_cmd_t
*mcp
= &mc
;
3259 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3261 mcp
->mb
[0] = MBC_IDC_ACK
;
3262 memcpy(&mcp
->mb
[1], mb
, QLA_IDC_ACK_REGS
* sizeof(uint16_t));
3263 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
3265 mcp
->tov
= MBX_TOV_SECONDS
;
3267 rval
= qla2x00_mailbox_command(vha
, mcp
);
3269 if (rval
!= QLA_SUCCESS
) {
3270 DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__
,
3271 vha
->host_no
, rval
, mcp
->mb
[0]));
3273 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
3280 qla81xx_fac_get_sector_size(scsi_qla_host_t
*vha
, uint32_t *sector_size
)
3284 mbx_cmd_t
*mcp
= &mc
;
3286 if (!IS_QLA81XX(vha
->hw
))
3287 return QLA_FUNCTION_FAILED
;
3289 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3291 mcp
->mb
[0] = MBC_FLASH_ACCESS_CTRL
;
3292 mcp
->mb
[1] = FAC_OPT_CMD_GET_SECTOR_SIZE
;
3293 mcp
->out_mb
= MBX_1
|MBX_0
;
3294 mcp
->in_mb
= MBX_1
|MBX_0
;
3295 mcp
->tov
= MBX_TOV_SECONDS
;
3297 rval
= qla2x00_mailbox_command(vha
, mcp
);
3299 if (rval
!= QLA_SUCCESS
) {
3300 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
3301 __func__
, vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
3303 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
3304 *sector_size
= mcp
->mb
[1];
3311 qla81xx_fac_do_write_enable(scsi_qla_host_t
*vha
, int enable
)
3315 mbx_cmd_t
*mcp
= &mc
;
3317 if (!IS_QLA81XX(vha
->hw
))
3318 return QLA_FUNCTION_FAILED
;
3320 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3322 mcp
->mb
[0] = MBC_FLASH_ACCESS_CTRL
;
3323 mcp
->mb
[1] = enable
? FAC_OPT_CMD_WRITE_ENABLE
:
3324 FAC_OPT_CMD_WRITE_PROTECT
;
3325 mcp
->out_mb
= MBX_1
|MBX_0
;
3326 mcp
->in_mb
= MBX_1
|MBX_0
;
3327 mcp
->tov
= MBX_TOV_SECONDS
;
3329 rval
= qla2x00_mailbox_command(vha
, mcp
);
3331 if (rval
!= QLA_SUCCESS
) {
3332 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
3333 __func__
, vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
3335 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
3342 qla81xx_fac_erase_sector(scsi_qla_host_t
*vha
, uint32_t start
, uint32_t finish
)
3346 mbx_cmd_t
*mcp
= &mc
;
3348 if (!IS_QLA81XX(vha
->hw
))
3349 return QLA_FUNCTION_FAILED
;
3351 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3353 mcp
->mb
[0] = MBC_FLASH_ACCESS_CTRL
;
3354 mcp
->mb
[1] = FAC_OPT_CMD_ERASE_SECTOR
;
3355 mcp
->mb
[2] = LSW(start
);
3356 mcp
->mb
[3] = MSW(start
);
3357 mcp
->mb
[4] = LSW(finish
);
3358 mcp
->mb
[5] = MSW(finish
);
3359 mcp
->out_mb
= MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
3360 mcp
->in_mb
= MBX_2
|MBX_1
|MBX_0
;
3361 mcp
->tov
= MBX_TOV_SECONDS
;
3363 rval
= qla2x00_mailbox_command(vha
, mcp
);
3365 if (rval
!= QLA_SUCCESS
) {
3366 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x "
3367 "mb[2]=%x.\n", __func__
, vha
->host_no
, rval
, mcp
->mb
[0],
3368 mcp
->mb
[1], mcp
->mb
[2]));
3370 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
3377 qla81xx_restart_mpi_firmware(scsi_qla_host_t
*vha
)
3381 mbx_cmd_t
*mcp
= &mc
;
3383 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3385 mcp
->mb
[0] = MBC_RESTART_MPI_FW
;
3386 mcp
->out_mb
= MBX_0
;
3387 mcp
->in_mb
= MBX_0
|MBX_1
;
3388 mcp
->tov
= MBX_TOV_SECONDS
;
3390 rval
= qla2x00_mailbox_command(vha
, mcp
);
3392 if (rval
!= QLA_SUCCESS
) {
3393 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=0x%x mb[1]=0x%x.\n",
3394 __func__
, vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
3396 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
3403 qla2x00_read_edc(scsi_qla_host_t
*vha
, uint16_t dev
, uint16_t adr
,
3404 dma_addr_t sfp_dma
, uint8_t *sfp
, uint16_t len
, uint16_t opt
)
3408 mbx_cmd_t
*mcp
= &mc
;
3410 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3412 mcp
->mb
[0] = MBC_READ_SFP
;
3414 mcp
->mb
[2] = MSW(sfp_dma
);
3415 mcp
->mb
[3] = LSW(sfp_dma
);
3416 mcp
->mb
[6] = MSW(MSD(sfp_dma
));
3417 mcp
->mb
[7] = LSW(MSD(sfp_dma
));
3421 mcp
->out_mb
= MBX_10
|MBX_9
|MBX_8
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
3423 mcp
->tov
= MBX_TOV_SECONDS
;
3425 rval
= qla2x00_mailbox_command(vha
, mcp
);
3431 if (rval
!= QLA_SUCCESS
) {
3432 DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__
,
3433 vha
->host_no
, rval
, mcp
->mb
[0]));
3435 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
3442 qla2x00_write_edc(scsi_qla_host_t
*vha
, uint16_t dev
, uint16_t adr
,
3443 dma_addr_t sfp_dma
, uint8_t *sfp
, uint16_t len
, uint16_t opt
)
3447 mbx_cmd_t
*mcp
= &mc
;
3449 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3455 mcp
->mb
[0] = MBC_WRITE_SFP
;
3457 mcp
->mb
[2] = MSW(sfp_dma
);
3458 mcp
->mb
[3] = LSW(sfp_dma
);
3459 mcp
->mb
[6] = MSW(MSD(sfp_dma
));
3460 mcp
->mb
[7] = LSW(MSD(sfp_dma
));
3464 mcp
->out_mb
= MBX_10
|MBX_9
|MBX_8
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
3466 mcp
->tov
= MBX_TOV_SECONDS
;
3468 rval
= qla2x00_mailbox_command(vha
, mcp
);
3470 if (rval
!= QLA_SUCCESS
) {
3471 DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__
,
3472 vha
->host_no
, rval
, mcp
->mb
[0]));
3474 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
3481 qla2x00_get_xgmac_stats(scsi_qla_host_t
*vha
, dma_addr_t stats_dma
,
3482 uint16_t size_in_bytes
, uint16_t *actual_size
)
3486 mbx_cmd_t
*mcp
= &mc
;
3488 if (!IS_QLA81XX(vha
->hw
))
3489 return QLA_FUNCTION_FAILED
;
3491 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3493 mcp
->mb
[0] = MBC_GET_XGMAC_STATS
;
3494 mcp
->mb
[2] = MSW(stats_dma
);
3495 mcp
->mb
[3] = LSW(stats_dma
);
3496 mcp
->mb
[6] = MSW(MSD(stats_dma
));
3497 mcp
->mb
[7] = LSW(MSD(stats_dma
));
3498 mcp
->mb
[8] = size_in_bytes
>> 2;
3499 mcp
->out_mb
= MBX_8
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_0
;
3500 mcp
->in_mb
= MBX_2
|MBX_1
|MBX_0
;
3501 mcp
->tov
= MBX_TOV_SECONDS
;
3503 rval
= qla2x00_mailbox_command(vha
, mcp
);
3505 if (rval
!= QLA_SUCCESS
) {
3506 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=0x%x "
3507 "mb[1]=0x%x mb[2]=0x%x.\n", __func__
, vha
->host_no
, rval
,
3508 mcp
->mb
[0], mcp
->mb
[1], mcp
->mb
[2]));
3510 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
3512 *actual_size
= mcp
->mb
[2] << 2;
3519 qla2x00_get_dcbx_params(scsi_qla_host_t
*vha
, dma_addr_t tlv_dma
,
3524 mbx_cmd_t
*mcp
= &mc
;
3526 if (!IS_QLA81XX(vha
->hw
))
3527 return QLA_FUNCTION_FAILED
;
3529 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3531 mcp
->mb
[0] = MBC_GET_DCBX_PARAMS
;
3533 mcp
->mb
[2] = MSW(tlv_dma
);
3534 mcp
->mb
[3] = LSW(tlv_dma
);
3535 mcp
->mb
[6] = MSW(MSD(tlv_dma
));
3536 mcp
->mb
[7] = LSW(MSD(tlv_dma
));
3538 mcp
->out_mb
= MBX_8
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
3539 mcp
->in_mb
= MBX_2
|MBX_1
|MBX_0
;
3540 mcp
->tov
= MBX_TOV_SECONDS
;
3542 rval
= qla2x00_mailbox_command(vha
, mcp
);
3544 if (rval
!= QLA_SUCCESS
) {
3545 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=0x%x "
3546 "mb[1]=0x%x mb[2]=0x%x.\n", __func__
, vha
->host_no
, rval
,
3547 mcp
->mb
[0], mcp
->mb
[1], mcp
->mb
[2]));
3549 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
3556 qla2x00_read_ram_word(scsi_qla_host_t
*vha
, uint32_t risc_addr
, uint32_t *data
)
3560 mbx_cmd_t
*mcp
= &mc
;
3562 if (!IS_FWI2_CAPABLE(vha
->hw
))
3563 return QLA_FUNCTION_FAILED
;
3565 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3567 mcp
->mb
[0] = MBC_READ_RAM_EXTENDED
;
3568 mcp
->mb
[1] = LSW(risc_addr
);
3569 mcp
->mb
[8] = MSW(risc_addr
);
3570 mcp
->out_mb
= MBX_8
|MBX_1
|MBX_0
;
3571 mcp
->in_mb
= MBX_3
|MBX_2
|MBX_0
;
3574 rval
= qla2x00_mailbox_command(vha
, mcp
);
3575 if (rval
!= QLA_SUCCESS
) {
3576 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__
,
3577 vha
->host_no
, rval
, mcp
->mb
[0]));
3579 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
3580 *data
= mcp
->mb
[3] << 16 | mcp
->mb
[2];
3587 qla2x00_write_ram_word(scsi_qla_host_t
*vha
, uint32_t risc_addr
, uint32_t data
)
3591 mbx_cmd_t
*mcp
= &mc
;
3593 if (!IS_FWI2_CAPABLE(vha
->hw
))
3594 return QLA_FUNCTION_FAILED
;
3596 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3598 mcp
->mb
[0] = MBC_WRITE_RAM_WORD_EXTENDED
;
3599 mcp
->mb
[1] = LSW(risc_addr
);
3600 mcp
->mb
[2] = LSW(data
);
3601 mcp
->mb
[3] = MSW(data
);
3602 mcp
->mb
[8] = MSW(risc_addr
);
3603 mcp
->out_mb
= MBX_8
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
3607 rval
= qla2x00_mailbox_command(vha
, mcp
);
3608 if (rval
!= QLA_SUCCESS
) {
3609 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__
,
3610 vha
->host_no
, rval
, mcp
->mb
[0]));
3612 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));