1 /******************************************************************************
3 * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
5 * Portions of this file are derived from the ipw3945 project, as well
6 * as portions of the ieee80211 subsystem header files.
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of version 2 of the GNU General Public License as
10 * published by the Free Software Foundation.
12 * This program is distributed in the hope that it will be useful, but WITHOUT
13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
17 * You should have received a copy of the GNU General Public License along with
18 * this program; if not, write to the Free Software Foundation, Inc.,
19 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
21 * The full GNU General Public License is included in this distribution in the
22 * file called LICENSE.
24 * Contact Information:
25 * Intel Linux Wireless <ilw@linux.intel.com>
26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
28 *****************************************************************************/
30 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
32 #include <linux/kernel.h>
33 #include <linux/module.h>
34 #include <linux/init.h>
35 #include <linux/slab.h>
36 #include <linux/dma-mapping.h>
37 #include <linux/delay.h>
38 #include <linux/sched.h>
39 #include <linux/skbuff.h>
40 #include <linux/netdevice.h>
41 #include <linux/wireless.h>
42 #include <linux/firmware.h>
43 #include <linux/etherdevice.h>
44 #include <linux/if_arp.h>
46 #include <net/mac80211.h>
48 #include <asm/div64.h>
50 #include "iwl-eeprom.h"
54 #include "iwl-helpers.h"
56 #include "iwl-agn-calib.h"
59 #include "iwl-trans.h"
61 /******************************************************************************
65 ******************************************************************************/
68 * module name, copyright, version, etc.
70 #define DRV_DESCRIPTION "Intel(R) Wireless WiFi Link AGN driver for Linux"
72 #ifdef CONFIG_IWLWIFI_DEBUG
78 #define DRV_VERSION IWLWIFI_VERSION VD
81 MODULE_DESCRIPTION(DRV_DESCRIPTION
);
82 MODULE_VERSION(DRV_VERSION
);
83 MODULE_AUTHOR(DRV_COPYRIGHT
" " DRV_AUTHOR
);
84 MODULE_LICENSE("GPL");
86 static int iwlagn_ant_coupling
;
87 static bool iwlagn_bt_ch_announce
= 1;
89 void iwl_update_chain_flags(struct iwl_priv
*priv
)
91 struct iwl_rxon_context
*ctx
;
93 for_each_context(priv
, ctx
) {
94 iwlagn_set_rxon_chain(priv
, ctx
);
95 if (ctx
->active
.rx_chain
!= ctx
->staging
.rx_chain
)
96 iwlagn_commit_rxon(priv
, ctx
);
100 /* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */
101 static void iwl_set_beacon_tim(struct iwl_priv
*priv
,
102 struct iwl_tx_beacon_cmd
*tx_beacon_cmd
,
103 u8
*beacon
, u32 frame_size
)
106 struct ieee80211_mgmt
*mgmt
= (struct ieee80211_mgmt
*)beacon
;
109 * The index is relative to frame start but we start looking at the
110 * variable-length part of the beacon.
112 tim_idx
= mgmt
->u
.beacon
.variable
- beacon
;
114 /* Parse variable-length elements of beacon to find WLAN_EID_TIM */
115 while ((tim_idx
< (frame_size
- 2)) &&
116 (beacon
[tim_idx
] != WLAN_EID_TIM
))
117 tim_idx
+= beacon
[tim_idx
+1] + 2;
119 /* If TIM field was found, set variables */
120 if ((tim_idx
< (frame_size
- 1)) && (beacon
[tim_idx
] == WLAN_EID_TIM
)) {
121 tx_beacon_cmd
->tim_idx
= cpu_to_le16(tim_idx
);
122 tx_beacon_cmd
->tim_size
= beacon
[tim_idx
+1];
124 IWL_WARN(priv
, "Unable to find TIM Element in beacon\n");
127 int iwlagn_send_beacon_cmd(struct iwl_priv
*priv
)
129 struct iwl_tx_beacon_cmd
*tx_beacon_cmd
;
130 struct iwl_host_cmd cmd
= {
131 .id
= REPLY_TX_BEACON
,
134 struct ieee80211_tx_info
*info
;
140 * We have to set up the TX command, the TX Beacon command, and the
144 lockdep_assert_held(&priv
->mutex
);
146 if (!priv
->beacon_ctx
) {
147 IWL_ERR(priv
, "trying to build beacon w/o beacon context!\n");
151 if (WARN_ON(!priv
->beacon_skb
))
154 /* Allocate beacon command */
155 if (!priv
->beacon_cmd
)
156 priv
->beacon_cmd
= kzalloc(sizeof(*tx_beacon_cmd
), GFP_KERNEL
);
157 tx_beacon_cmd
= priv
->beacon_cmd
;
161 frame_size
= priv
->beacon_skb
->len
;
163 /* Set up TX command fields */
164 tx_beacon_cmd
->tx
.len
= cpu_to_le16((u16
)frame_size
);
165 tx_beacon_cmd
->tx
.sta_id
= priv
->beacon_ctx
->bcast_sta_id
;
166 tx_beacon_cmd
->tx
.stop_time
.life_time
= TX_CMD_LIFE_TIME_INFINITE
;
167 tx_beacon_cmd
->tx
.tx_flags
= TX_CMD_FLG_SEQ_CTL_MSK
|
168 TX_CMD_FLG_TSF_MSK
| TX_CMD_FLG_STA_RATE_MSK
;
170 /* Set up TX beacon command fields */
171 iwl_set_beacon_tim(priv
, tx_beacon_cmd
, priv
->beacon_skb
->data
,
174 /* Set up packet rate and flags */
175 info
= IEEE80211_SKB_CB(priv
->beacon_skb
);
178 * Let's set up the rate at least somewhat correctly;
179 * it will currently not actually be used by the uCode,
180 * it uses the broadcast station's rate instead.
182 if (info
->control
.rates
[0].idx
< 0 ||
183 info
->control
.rates
[0].flags
& IEEE80211_TX_RC_MCS
)
186 rate
= info
->control
.rates
[0].idx
;
188 priv
->mgmt_tx_ant
= iwl_toggle_tx_ant(priv
, priv
->mgmt_tx_ant
,
189 priv
->hw_params
.valid_tx_ant
);
190 rate_flags
= iwl_ant_idx_to_flags(priv
->mgmt_tx_ant
);
192 /* In mac80211, rates for 5 GHz start at 0 */
193 if (info
->band
== IEEE80211_BAND_5GHZ
)
194 rate
+= IWL_FIRST_OFDM_RATE
;
195 else if (rate
>= IWL_FIRST_CCK_RATE
&& rate
<= IWL_LAST_CCK_RATE
)
196 rate_flags
|= RATE_MCS_CCK_MSK
;
198 tx_beacon_cmd
->tx
.rate_n_flags
=
199 iwl_hw_set_rate_n_flags(rate
, rate_flags
);
202 cmd
.len
[0] = sizeof(*tx_beacon_cmd
);
203 cmd
.data
[0] = tx_beacon_cmd
;
204 cmd
.dataflags
[0] = IWL_HCMD_DFL_NOCOPY
;
205 cmd
.len
[1] = frame_size
;
206 cmd
.data
[1] = priv
->beacon_skb
->data
;
207 cmd
.dataflags
[1] = IWL_HCMD_DFL_NOCOPY
;
209 return trans_send_cmd(priv
, &cmd
);
212 static void iwl_bg_beacon_update(struct work_struct
*work
)
214 struct iwl_priv
*priv
=
215 container_of(work
, struct iwl_priv
, beacon_update
);
216 struct sk_buff
*beacon
;
218 mutex_lock(&priv
->mutex
);
219 if (!priv
->beacon_ctx
) {
220 IWL_ERR(priv
, "updating beacon w/o beacon context!\n");
224 if (priv
->beacon_ctx
->vif
->type
!= NL80211_IFTYPE_AP
) {
226 * The ucode will send beacon notifications even in
227 * IBSS mode, but we don't want to process them. But
228 * we need to defer the type check to here due to
229 * requiring locking around the beacon_ctx access.
234 /* Pull updated AP beacon from mac80211. will fail if not in AP mode */
235 beacon
= ieee80211_beacon_get(priv
->hw
, priv
->beacon_ctx
->vif
);
237 IWL_ERR(priv
, "update beacon failed -- keeping old\n");
241 /* new beacon skb is allocated every time; dispose previous.*/
242 dev_kfree_skb(priv
->beacon_skb
);
244 priv
->beacon_skb
= beacon
;
246 iwlagn_send_beacon_cmd(priv
);
248 mutex_unlock(&priv
->mutex
);
251 static void iwl_bg_bt_runtime_config(struct work_struct
*work
)
253 struct iwl_priv
*priv
=
254 container_of(work
, struct iwl_priv
, bt_runtime_config
);
256 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
259 /* dont send host command if rf-kill is on */
260 if (!iwl_is_ready_rf(priv
))
262 iwlagn_send_advance_bt_config(priv
);
265 static void iwl_bg_bt_full_concurrency(struct work_struct
*work
)
267 struct iwl_priv
*priv
=
268 container_of(work
, struct iwl_priv
, bt_full_concurrency
);
269 struct iwl_rxon_context
*ctx
;
271 mutex_lock(&priv
->mutex
);
273 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
276 /* dont send host command if rf-kill is on */
277 if (!iwl_is_ready_rf(priv
))
280 IWL_DEBUG_INFO(priv
, "BT coex in %s mode\n",
281 priv
->bt_full_concurrent
?
282 "full concurrency" : "3-wire");
285 * LQ & RXON updated cmds must be sent before BT Config cmd
286 * to avoid 3-wire collisions
288 for_each_context(priv
, ctx
) {
289 iwlagn_set_rxon_chain(priv
, ctx
);
290 iwlagn_commit_rxon(priv
, ctx
);
293 iwlagn_send_advance_bt_config(priv
);
295 mutex_unlock(&priv
->mutex
);
299 * iwl_bg_statistics_periodic - Timer callback to queue statistics
301 * This callback is provided in order to send a statistics request.
303 * This timer function is continually reset to execute within
304 * REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION
305 * was received. We need to ensure we receive the statistics in order
306 * to update the temperature used for calibrating the TXPOWER.
308 static void iwl_bg_statistics_periodic(unsigned long data
)
310 struct iwl_priv
*priv
= (struct iwl_priv
*)data
;
312 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
315 /* dont send host command if rf-kill is on */
316 if (!iwl_is_ready_rf(priv
))
319 iwl_send_statistics_request(priv
, CMD_ASYNC
, false);
323 static void iwl_print_cont_event_trace(struct iwl_priv
*priv
, u32 base
,
324 u32 start_idx
, u32 num_events
,
328 u32 ptr
; /* SRAM byte address of log data */
329 u32 ev
, time
, data
; /* event log data */
330 unsigned long reg_flags
;
333 ptr
= base
+ (4 * sizeof(u32
)) + (start_idx
* 2 * sizeof(u32
));
335 ptr
= base
+ (4 * sizeof(u32
)) + (start_idx
* 3 * sizeof(u32
));
337 /* Make sure device is powered up for SRAM reads */
338 spin_lock_irqsave(&priv
->reg_lock
, reg_flags
);
339 if (iwl_grab_nic_access(priv
)) {
340 spin_unlock_irqrestore(&priv
->reg_lock
, reg_flags
);
344 /* Set starting address; reads will auto-increment */
345 iwl_write32(priv
, HBUS_TARG_MEM_RADDR
, ptr
);
349 * "time" is actually "data" for mode 0 (no timestamp).
350 * place event id # at far right for easier visual parsing.
352 for (i
= 0; i
< num_events
; i
++) {
353 ev
= iwl_read32(priv
, HBUS_TARG_MEM_RDAT
);
354 time
= iwl_read32(priv
, HBUS_TARG_MEM_RDAT
);
356 trace_iwlwifi_dev_ucode_cont_event(priv
,
359 data
= iwl_read32(priv
, HBUS_TARG_MEM_RDAT
);
360 trace_iwlwifi_dev_ucode_cont_event(priv
,
364 /* Allow device to power down */
365 iwl_release_nic_access(priv
);
366 spin_unlock_irqrestore(&priv
->reg_lock
, reg_flags
);
369 static void iwl_continuous_event_trace(struct iwl_priv
*priv
)
371 u32 capacity
; /* event log capacity in # entries */
372 u32 base
; /* SRAM byte address of event log header */
373 u32 mode
; /* 0 - no timestamp, 1 - timestamp recorded */
374 u32 num_wraps
; /* # times uCode wrapped to top of log */
375 u32 next_entry
; /* index of next entry to be written by uCode */
377 base
= priv
->device_pointers
.error_event_table
;
378 if (priv
->cfg
->ops
->lib
->is_valid_rtc_data_addr(base
)) {
379 capacity
= iwl_read_targ_mem(priv
, base
);
380 num_wraps
= iwl_read_targ_mem(priv
, base
+ (2 * sizeof(u32
)));
381 mode
= iwl_read_targ_mem(priv
, base
+ (1 * sizeof(u32
)));
382 next_entry
= iwl_read_targ_mem(priv
, base
+ (3 * sizeof(u32
)));
386 if (num_wraps
== priv
->event_log
.num_wraps
) {
387 iwl_print_cont_event_trace(priv
,
388 base
, priv
->event_log
.next_entry
,
389 next_entry
- priv
->event_log
.next_entry
,
391 priv
->event_log
.non_wraps_count
++;
393 if ((num_wraps
- priv
->event_log
.num_wraps
) > 1)
394 priv
->event_log
.wraps_more_count
++;
396 priv
->event_log
.wraps_once_count
++;
397 trace_iwlwifi_dev_ucode_wrap_event(priv
,
398 num_wraps
- priv
->event_log
.num_wraps
,
399 next_entry
, priv
->event_log
.next_entry
);
400 if (next_entry
< priv
->event_log
.next_entry
) {
401 iwl_print_cont_event_trace(priv
, base
,
402 priv
->event_log
.next_entry
,
403 capacity
- priv
->event_log
.next_entry
,
406 iwl_print_cont_event_trace(priv
, base
, 0,
409 iwl_print_cont_event_trace(priv
, base
,
410 next_entry
, capacity
- next_entry
,
413 iwl_print_cont_event_trace(priv
, base
, 0,
417 priv
->event_log
.num_wraps
= num_wraps
;
418 priv
->event_log
.next_entry
= next_entry
;
422 * iwl_bg_ucode_trace - Timer callback to log ucode event
424 * The timer is continually set to execute every
425 * UCODE_TRACE_PERIOD milliseconds after the last timer expired
426 * this function is to perform continuous uCode event logging operation
429 static void iwl_bg_ucode_trace(unsigned long data
)
431 struct iwl_priv
*priv
= (struct iwl_priv
*)data
;
433 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
436 if (priv
->event_log
.ucode_trace
) {
437 iwl_continuous_event_trace(priv
);
438 /* Reschedule the timer to occur in UCODE_TRACE_PERIOD */
439 mod_timer(&priv
->ucode_trace
,
440 jiffies
+ msecs_to_jiffies(UCODE_TRACE_PERIOD
));
444 static void iwl_bg_tx_flush(struct work_struct
*work
)
446 struct iwl_priv
*priv
=
447 container_of(work
, struct iwl_priv
, tx_flush
);
449 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
452 /* do nothing if rf-kill is on */
453 if (!iwl_is_ready_rf(priv
))
456 IWL_DEBUG_INFO(priv
, "device request: flush all tx frames\n");
457 iwlagn_dev_txfifo_flush(priv
, IWL_DROP_ALL
);
461 * iwl_rx_handle - Main entry function for receiving responses from uCode
463 * Uses the priv->rx_handlers callback function array to invoke
464 * the appropriate handlers, including command responses,
465 * frame-received notifications, and other notifications.
467 static void iwl_rx_handle(struct iwl_priv
*priv
)
469 struct iwl_rx_mem_buffer
*rxb
;
470 struct iwl_rx_packet
*pkt
;
471 struct iwl_rx_queue
*rxq
= &priv
->rxq
;
479 /* uCode's read index (stored in shared DRAM) indicates the last Rx
480 * buffer that the driver may process (last buffer filled by ucode). */
481 r
= le16_to_cpu(rxq
->rb_stts
->closed_rb_num
) & 0x0FFF;
484 /* Rx interrupt, but nothing sent from uCode */
486 IWL_DEBUG_RX(priv
, "r = %d, i = %d\n", r
, i
);
488 /* calculate total frames need to be restock after handling RX */
489 total_empty
= r
- rxq
->write_actual
;
491 total_empty
+= RX_QUEUE_SIZE
;
493 if (total_empty
> (RX_QUEUE_SIZE
/ 2))
501 /* If an RXB doesn't have a Rx queue slot associated with it,
502 * then a bug has been introduced in the queue refilling
503 * routines -- catch it here */
504 if (WARN_ON(rxb
== NULL
)) {
505 i
= (i
+ 1) & RX_QUEUE_MASK
;
509 rxq
->queue
[i
] = NULL
;
511 dma_unmap_page(priv
->bus
.dev
, rxb
->page_dma
,
512 PAGE_SIZE
<< priv
->hw_params
.rx_page_order
,
516 len
= le32_to_cpu(pkt
->len_n_flags
) & FH_RSCSR_FRAME_SIZE_MSK
;
517 len
+= sizeof(u32
); /* account for status word */
518 trace_iwlwifi_dev_rx(priv
, pkt
, len
);
520 /* Reclaim a command buffer only if this packet is a response
521 * to a (driver-originated) command.
522 * If the packet (e.g. Rx frame) originated from uCode,
523 * there is no command buffer to reclaim.
524 * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
525 * but apparently a few don't get set; catch them here. */
526 reclaim
= !(pkt
->hdr
.sequence
& SEQ_RX_FRAME
) &&
527 (pkt
->hdr
.cmd
!= REPLY_RX_PHY_CMD
) &&
528 (pkt
->hdr
.cmd
!= REPLY_RX
) &&
529 (pkt
->hdr
.cmd
!= REPLY_RX_MPDU_CMD
) &&
530 (pkt
->hdr
.cmd
!= REPLY_COMPRESSED_BA
) &&
531 (pkt
->hdr
.cmd
!= STATISTICS_NOTIFICATION
) &&
532 (pkt
->hdr
.cmd
!= REPLY_TX
);
535 * Do the notification wait before RX handlers so
536 * even if the RX handler consumes the RXB we have
537 * access to it in the notification wait entry.
539 if (!list_empty(&priv
->_agn
.notif_waits
)) {
540 struct iwl_notification_wait
*w
;
542 spin_lock(&priv
->_agn
.notif_wait_lock
);
543 list_for_each_entry(w
, &priv
->_agn
.notif_waits
, list
) {
544 if (w
->cmd
== pkt
->hdr
.cmd
) {
547 w
->fn(priv
, pkt
, w
->fn_data
);
550 spin_unlock(&priv
->_agn
.notif_wait_lock
);
552 wake_up_all(&priv
->_agn
.notif_waitq
);
554 if (priv
->pre_rx_handler
)
555 priv
->pre_rx_handler(priv
, rxb
);
557 /* Based on type of command response or notification,
558 * handle those that need handling via function in
559 * rx_handlers table. See iwl_setup_rx_handlers() */
560 if (priv
->rx_handlers
[pkt
->hdr
.cmd
]) {
561 IWL_DEBUG_RX(priv
, "r = %d, i = %d, %s, 0x%02x\n", r
,
562 i
, get_cmd_string(pkt
->hdr
.cmd
), pkt
->hdr
.cmd
);
563 priv
->isr_stats
.rx_handlers
[pkt
->hdr
.cmd
]++;
564 priv
->rx_handlers
[pkt
->hdr
.cmd
] (priv
, rxb
);
566 /* No handling needed */
568 "r %d i %d No handler needed for %s, 0x%02x\n",
569 r
, i
, get_cmd_string(pkt
->hdr
.cmd
),
574 * XXX: After here, we should always check rxb->page
575 * against NULL before touching it or its virtual
576 * memory (pkt). Because some rx_handler might have
577 * already taken or freed the pages.
581 /* Invoke any callbacks, transfer the buffer to caller,
582 * and fire off the (possibly) blocking
584 * as we reclaim the driver command queue */
586 iwl_tx_cmd_complete(priv
, rxb
);
588 IWL_WARN(priv
, "Claim null rxb?\n");
591 /* Reuse the page if possible. For notification packets and
592 * SKBs that fail to Rx correctly, add them back into the
593 * rx_free list for reuse later. */
594 spin_lock_irqsave(&rxq
->lock
, flags
);
595 if (rxb
->page
!= NULL
) {
596 rxb
->page_dma
= dma_map_page(priv
->bus
.dev
, rxb
->page
,
597 0, PAGE_SIZE
<< priv
->hw_params
.rx_page_order
,
599 list_add_tail(&rxb
->list
, &rxq
->rx_free
);
602 list_add_tail(&rxb
->list
, &rxq
->rx_used
);
604 spin_unlock_irqrestore(&rxq
->lock
, flags
);
606 i
= (i
+ 1) & RX_QUEUE_MASK
;
607 /* If there are a lot of unused frames,
608 * restock the Rx queue so ucode wont assert. */
613 iwlagn_rx_replenish_now(priv
);
619 /* Backtrack one entry */
622 iwlagn_rx_replenish_now(priv
);
624 iwlagn_rx_queue_restock(priv
);
627 /* tasklet for iwlagn interrupt */
628 static void iwl_irq_tasklet(struct iwl_priv
*priv
)
634 #ifdef CONFIG_IWLWIFI_DEBUG
638 spin_lock_irqsave(&priv
->lock
, flags
);
640 /* Ack/clear/reset pending uCode interrupts.
641 * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
643 /* There is a hardware bug in the interrupt mask function that some
644 * interrupts (i.e. CSR_INT_BIT_SCD) can still be generated even if
645 * they are disabled in the CSR_INT_MASK register. Furthermore the
646 * ICT interrupt handling mechanism has another bug that might cause
647 * these unmasked interrupts fail to be detected. We workaround the
648 * hardware bugs here by ACKing all the possible interrupts so that
649 * interrupt coalescing can still be achieved.
651 iwl_write32(priv
, CSR_INT
, priv
->_agn
.inta
| ~priv
->inta_mask
);
653 inta
= priv
->_agn
.inta
;
655 #ifdef CONFIG_IWLWIFI_DEBUG
656 if (iwl_get_debug_level(priv
) & IWL_DL_ISR
) {
658 inta_mask
= iwl_read32(priv
, CSR_INT_MASK
);
659 IWL_DEBUG_ISR(priv
, "inta 0x%08x, enabled 0x%08x\n ",
664 spin_unlock_irqrestore(&priv
->lock
, flags
);
666 /* saved interrupt in inta variable now we can reset priv->_agn.inta */
669 /* Now service all interrupt bits discovered above. */
670 if (inta
& CSR_INT_BIT_HW_ERR
) {
671 IWL_ERR(priv
, "Hardware error detected. Restarting.\n");
673 /* Tell the device to stop sending interrupts */
674 iwl_disable_interrupts(priv
);
676 priv
->isr_stats
.hw
++;
677 iwl_irq_handle_error(priv
);
679 handled
|= CSR_INT_BIT_HW_ERR
;
684 #ifdef CONFIG_IWLWIFI_DEBUG
685 if (iwl_get_debug_level(priv
) & (IWL_DL_ISR
)) {
686 /* NIC fires this, but we don't use it, redundant with WAKEUP */
687 if (inta
& CSR_INT_BIT_SCD
) {
688 IWL_DEBUG_ISR(priv
, "Scheduler finished to transmit "
689 "the frame/frames.\n");
690 priv
->isr_stats
.sch
++;
693 /* Alive notification via Rx interrupt will do the real work */
694 if (inta
& CSR_INT_BIT_ALIVE
) {
695 IWL_DEBUG_ISR(priv
, "Alive interrupt\n");
696 priv
->isr_stats
.alive
++;
700 /* Safely ignore these bits for debug checks below */
701 inta
&= ~(CSR_INT_BIT_SCD
| CSR_INT_BIT_ALIVE
);
703 /* HW RF KILL switch toggled */
704 if (inta
& CSR_INT_BIT_RF_KILL
) {
706 if (!(iwl_read32(priv
, CSR_GP_CNTRL
) &
707 CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW
))
710 IWL_WARN(priv
, "RF_KILL bit toggled to %s.\n",
711 hw_rf_kill
? "disable radio" : "enable radio");
713 priv
->isr_stats
.rfkill
++;
715 /* driver only loads ucode once setting the interface up.
716 * the driver allows loading the ucode even if the radio
717 * is killed. Hence update the killswitch state here. The
718 * rfkill handler will care about restarting if needed.
720 if (!test_bit(STATUS_ALIVE
, &priv
->status
)) {
722 set_bit(STATUS_RF_KILL_HW
, &priv
->status
);
724 clear_bit(STATUS_RF_KILL_HW
, &priv
->status
);
725 wiphy_rfkill_set_hw_state(priv
->hw
->wiphy
, hw_rf_kill
);
728 handled
|= CSR_INT_BIT_RF_KILL
;
731 /* Chip got too hot and stopped itself */
732 if (inta
& CSR_INT_BIT_CT_KILL
) {
733 IWL_ERR(priv
, "Microcode CT kill error detected.\n");
734 priv
->isr_stats
.ctkill
++;
735 handled
|= CSR_INT_BIT_CT_KILL
;
738 /* Error detected by uCode */
739 if (inta
& CSR_INT_BIT_SW_ERR
) {
740 IWL_ERR(priv
, "Microcode SW error detected. "
741 " Restarting 0x%X.\n", inta
);
742 priv
->isr_stats
.sw
++;
743 iwl_irq_handle_error(priv
);
744 handled
|= CSR_INT_BIT_SW_ERR
;
747 /* uCode wakes up after power-down sleep */
748 if (inta
& CSR_INT_BIT_WAKEUP
) {
749 IWL_DEBUG_ISR(priv
, "Wakeup interrupt\n");
750 iwl_rx_queue_update_write_ptr(priv
, &priv
->rxq
);
751 for (i
= 0; i
< priv
->hw_params
.max_txq_num
; i
++)
752 iwl_txq_update_write_ptr(priv
, &priv
->txq
[i
]);
754 priv
->isr_stats
.wakeup
++;
756 handled
|= CSR_INT_BIT_WAKEUP
;
759 /* All uCode command responses, including Tx command responses,
760 * Rx "responses" (frame-received notification), and other
761 * notifications from uCode come through here*/
762 if (inta
& (CSR_INT_BIT_FH_RX
| CSR_INT_BIT_SW_RX
|
763 CSR_INT_BIT_RX_PERIODIC
)) {
764 IWL_DEBUG_ISR(priv
, "Rx interrupt\n");
765 if (inta
& (CSR_INT_BIT_FH_RX
| CSR_INT_BIT_SW_RX
)) {
766 handled
|= (CSR_INT_BIT_FH_RX
| CSR_INT_BIT_SW_RX
);
767 iwl_write32(priv
, CSR_FH_INT_STATUS
,
770 if (inta
& CSR_INT_BIT_RX_PERIODIC
) {
771 handled
|= CSR_INT_BIT_RX_PERIODIC
;
772 iwl_write32(priv
, CSR_INT
, CSR_INT_BIT_RX_PERIODIC
);
774 /* Sending RX interrupt require many steps to be done in the
776 * 1- write interrupt to current index in ICT table.
778 * 3- update RX shared data to indicate last write index.
780 * This could lead to RX race, driver could receive RX interrupt
781 * but the shared data changes does not reflect this;
782 * periodic interrupt will detect any dangling Rx activity.
785 /* Disable periodic interrupt; we use it as just a one-shot. */
786 iwl_write8(priv
, CSR_INT_PERIODIC_REG
,
787 CSR_INT_PERIODIC_DIS
);
791 * Enable periodic interrupt in 8 msec only if we received
792 * real RX interrupt (instead of just periodic int), to catch
793 * any dangling Rx interrupt. If it was just the periodic
794 * interrupt, there was no dangling Rx activity, and no need
795 * to extend the periodic interrupt; one-shot is enough.
797 if (inta
& (CSR_INT_BIT_FH_RX
| CSR_INT_BIT_SW_RX
))
798 iwl_write8(priv
, CSR_INT_PERIODIC_REG
,
799 CSR_INT_PERIODIC_ENA
);
801 priv
->isr_stats
.rx
++;
804 /* This "Tx" DMA channel is used only for loading uCode */
805 if (inta
& CSR_INT_BIT_FH_TX
) {
806 iwl_write32(priv
, CSR_FH_INT_STATUS
, CSR_FH_INT_TX_MASK
);
807 IWL_DEBUG_ISR(priv
, "uCode load interrupt\n");
808 priv
->isr_stats
.tx
++;
809 handled
|= CSR_INT_BIT_FH_TX
;
810 /* Wake up uCode load routine, now that load is complete */
811 priv
->ucode_write_complete
= 1;
812 wake_up_interruptible(&priv
->wait_command_queue
);
815 if (inta
& ~handled
) {
816 IWL_ERR(priv
, "Unhandled INTA bits 0x%08x\n", inta
& ~handled
);
817 priv
->isr_stats
.unhandled
++;
820 if (inta
& ~(priv
->inta_mask
)) {
821 IWL_WARN(priv
, "Disabled INTA bits 0x%08x were pending\n",
822 inta
& ~priv
->inta_mask
);
825 /* Re-enable all interrupts */
826 /* only Re-enable if disabled by irq */
827 if (test_bit(STATUS_INT_ENABLED
, &priv
->status
))
828 iwl_enable_interrupts(priv
);
829 /* Re-enable RF_KILL if it occurred */
830 else if (handled
& CSR_INT_BIT_RF_KILL
)
831 iwl_enable_rfkill_int(priv
);
834 /*****************************************************************************
838 *****************************************************************************/
840 #ifdef CONFIG_IWLWIFI_DEBUG
843 * The following adds a new attribute to the sysfs representation
844 * of this device driver (i.e. a new file in /sys/class/net/wlan0/device/)
845 * used for controlling the debug level.
847 * See the level definitions in iwl for details.
849 * The debug_level being managed using sysfs below is a per device debug
850 * level that is used instead of the global debug level if it (the per
851 * device debug level) is set.
853 static ssize_t
show_debug_level(struct device
*d
,
854 struct device_attribute
*attr
, char *buf
)
856 struct iwl_priv
*priv
= dev_get_drvdata(d
);
857 return sprintf(buf
, "0x%08X\n", iwl_get_debug_level(priv
));
859 static ssize_t
store_debug_level(struct device
*d
,
860 struct device_attribute
*attr
,
861 const char *buf
, size_t count
)
863 struct iwl_priv
*priv
= dev_get_drvdata(d
);
867 ret
= strict_strtoul(buf
, 0, &val
);
869 IWL_ERR(priv
, "%s is not in hex or decimal form.\n", buf
);
871 priv
->debug_level
= val
;
872 if (iwl_alloc_traffic_mem(priv
))
874 "Not enough memory to generate traffic log\n");
876 return strnlen(buf
, count
);
879 static DEVICE_ATTR(debug_level
, S_IWUSR
| S_IRUGO
,
880 show_debug_level
, store_debug_level
);
883 #endif /* CONFIG_IWLWIFI_DEBUG */
886 static ssize_t
show_temperature(struct device
*d
,
887 struct device_attribute
*attr
, char *buf
)
889 struct iwl_priv
*priv
= dev_get_drvdata(d
);
891 if (!iwl_is_alive(priv
))
894 return sprintf(buf
, "%d\n", priv
->temperature
);
897 static DEVICE_ATTR(temperature
, S_IRUGO
, show_temperature
, NULL
);
899 static ssize_t
show_tx_power(struct device
*d
,
900 struct device_attribute
*attr
, char *buf
)
902 struct iwl_priv
*priv
= dev_get_drvdata(d
);
904 if (!iwl_is_ready_rf(priv
))
905 return sprintf(buf
, "off\n");
907 return sprintf(buf
, "%d\n", priv
->tx_power_user_lmt
);
910 static ssize_t
store_tx_power(struct device
*d
,
911 struct device_attribute
*attr
,
912 const char *buf
, size_t count
)
914 struct iwl_priv
*priv
= dev_get_drvdata(d
);
918 ret
= strict_strtoul(buf
, 10, &val
);
920 IWL_INFO(priv
, "%s is not in decimal form.\n", buf
);
922 ret
= iwl_set_tx_power(priv
, val
, false);
924 IWL_ERR(priv
, "failed setting tx power (0x%d).\n",
932 static DEVICE_ATTR(tx_power
, S_IWUSR
| S_IRUGO
, show_tx_power
, store_tx_power
);
934 static struct attribute
*iwl_sysfs_entries
[] = {
935 &dev_attr_temperature
.attr
,
936 &dev_attr_tx_power
.attr
,
937 #ifdef CONFIG_IWLWIFI_DEBUG
938 &dev_attr_debug_level
.attr
,
943 static struct attribute_group iwl_attribute_group
= {
944 .name
= NULL
, /* put in device directory */
945 .attrs
= iwl_sysfs_entries
,
948 /******************************************************************************
950 * uCode download functions
952 ******************************************************************************/
954 static void iwl_free_fw_desc(struct iwl_priv
*priv
, struct fw_desc
*desc
)
957 dma_free_coherent(priv
->bus
.dev
, desc
->len
,
958 desc
->v_addr
, desc
->p_addr
);
963 static void iwl_free_fw_img(struct iwl_priv
*priv
, struct fw_img
*img
)
965 iwl_free_fw_desc(priv
, &img
->code
);
966 iwl_free_fw_desc(priv
, &img
->data
);
969 static void iwl_dealloc_ucode(struct iwl_priv
*priv
)
971 iwl_free_fw_img(priv
, &priv
->ucode_rt
);
972 iwl_free_fw_img(priv
, &priv
->ucode_init
);
975 static int iwl_alloc_fw_desc(struct iwl_priv
*priv
, struct fw_desc
*desc
,
976 const void *data
, size_t len
)
983 desc
->v_addr
= dma_alloc_coherent(priv
->bus
.dev
, len
,
984 &desc
->p_addr
, GFP_KERNEL
);
989 memcpy(desc
->v_addr
, data
, len
);
993 struct iwlagn_ucode_capabilities
{
994 u32 max_probe_length
;
995 u32 standard_phy_calibration_size
;
999 static void iwl_ucode_callback(const struct firmware
*ucode_raw
, void *context
);
1000 static int iwl_mac_setup_register(struct iwl_priv
*priv
,
1001 struct iwlagn_ucode_capabilities
*capa
);
1003 #define UCODE_EXPERIMENTAL_INDEX 100
1004 #define UCODE_EXPERIMENTAL_TAG "exp"
1006 static int __must_check
iwl_request_firmware(struct iwl_priv
*priv
, bool first
)
1008 const char *name_pre
= priv
->cfg
->fw_name_pre
;
1012 #ifdef CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE
1013 priv
->fw_index
= UCODE_EXPERIMENTAL_INDEX
;
1014 strcpy(tag
, UCODE_EXPERIMENTAL_TAG
);
1015 } else if (priv
->fw_index
== UCODE_EXPERIMENTAL_INDEX
) {
1017 priv
->fw_index
= priv
->cfg
->ucode_api_max
;
1018 sprintf(tag
, "%d", priv
->fw_index
);
1021 sprintf(tag
, "%d", priv
->fw_index
);
1024 if (priv
->fw_index
< priv
->cfg
->ucode_api_min
) {
1025 IWL_ERR(priv
, "no suitable firmware found!\n");
1029 sprintf(priv
->firmware_name
, "%s%s%s", name_pre
, tag
, ".ucode");
1031 IWL_DEBUG_INFO(priv
, "attempting to load firmware %s'%s'\n",
1032 (priv
->fw_index
== UCODE_EXPERIMENTAL_INDEX
)
1033 ? "EXPERIMENTAL " : "",
1034 priv
->firmware_name
);
1036 return request_firmware_nowait(THIS_MODULE
, 1, priv
->firmware_name
,
1038 GFP_KERNEL
, priv
, iwl_ucode_callback
);
1041 struct iwlagn_firmware_pieces
{
1042 const void *inst
, *data
, *init
, *init_data
;
1043 size_t inst_size
, data_size
, init_size
, init_data_size
;
1047 u32 init_evtlog_ptr
, init_evtlog_size
, init_errlog_ptr
;
1048 u32 inst_evtlog_ptr
, inst_evtlog_size
, inst_errlog_ptr
;
1051 static int iwlagn_load_legacy_firmware(struct iwl_priv
*priv
,
1052 const struct firmware
*ucode_raw
,
1053 struct iwlagn_firmware_pieces
*pieces
)
1055 struct iwl_ucode_header
*ucode
= (void *)ucode_raw
->data
;
1056 u32 api_ver
, hdr_size
;
1059 priv
->ucode_ver
= le32_to_cpu(ucode
->ver
);
1060 api_ver
= IWL_UCODE_API(priv
->ucode_ver
);
1065 if (ucode_raw
->size
< hdr_size
) {
1066 IWL_ERR(priv
, "File size too small!\n");
1069 pieces
->build
= le32_to_cpu(ucode
->u
.v2
.build
);
1070 pieces
->inst_size
= le32_to_cpu(ucode
->u
.v2
.inst_size
);
1071 pieces
->data_size
= le32_to_cpu(ucode
->u
.v2
.data_size
);
1072 pieces
->init_size
= le32_to_cpu(ucode
->u
.v2
.init_size
);
1073 pieces
->init_data_size
= le32_to_cpu(ucode
->u
.v2
.init_data_size
);
1074 src
= ucode
->u
.v2
.data
;
1080 if (ucode_raw
->size
< hdr_size
) {
1081 IWL_ERR(priv
, "File size too small!\n");
1085 pieces
->inst_size
= le32_to_cpu(ucode
->u
.v1
.inst_size
);
1086 pieces
->data_size
= le32_to_cpu(ucode
->u
.v1
.data_size
);
1087 pieces
->init_size
= le32_to_cpu(ucode
->u
.v1
.init_size
);
1088 pieces
->init_data_size
= le32_to_cpu(ucode
->u
.v1
.init_data_size
);
1089 src
= ucode
->u
.v1
.data
;
1093 /* Verify size of file vs. image size info in file's header */
1094 if (ucode_raw
->size
!= hdr_size
+ pieces
->inst_size
+
1095 pieces
->data_size
+ pieces
->init_size
+
1096 pieces
->init_data_size
) {
1099 "uCode file size %d does not match expected size\n",
1100 (int)ucode_raw
->size
);
1105 src
+= pieces
->inst_size
;
1107 src
+= pieces
->data_size
;
1109 src
+= pieces
->init_size
;
1110 pieces
->init_data
= src
;
1111 src
+= pieces
->init_data_size
;
1116 static int iwlagn_wanted_ucode_alternative
= 1;
1118 static int iwlagn_load_firmware(struct iwl_priv
*priv
,
1119 const struct firmware
*ucode_raw
,
1120 struct iwlagn_firmware_pieces
*pieces
,
1121 struct iwlagn_ucode_capabilities
*capa
)
1123 struct iwl_tlv_ucode_header
*ucode
= (void *)ucode_raw
->data
;
1124 struct iwl_ucode_tlv
*tlv
;
1125 size_t len
= ucode_raw
->size
;
1127 int wanted_alternative
= iwlagn_wanted_ucode_alternative
, tmp
;
1130 enum iwl_ucode_tlv_type tlv_type
;
1133 if (len
< sizeof(*ucode
)) {
1134 IWL_ERR(priv
, "uCode has invalid length: %zd\n", len
);
1138 if (ucode
->magic
!= cpu_to_le32(IWL_TLV_UCODE_MAGIC
)) {
1139 IWL_ERR(priv
, "invalid uCode magic: 0X%x\n",
1140 le32_to_cpu(ucode
->magic
));
1145 * Check which alternatives are present, and "downgrade"
1146 * when the chosen alternative is not present, warning
1147 * the user when that happens. Some files may not have
1148 * any alternatives, so don't warn in that case.
1150 alternatives
= le64_to_cpu(ucode
->alternatives
);
1151 tmp
= wanted_alternative
;
1152 if (wanted_alternative
> 63)
1153 wanted_alternative
= 63;
1154 while (wanted_alternative
&& !(alternatives
& BIT(wanted_alternative
)))
1155 wanted_alternative
--;
1156 if (wanted_alternative
&& wanted_alternative
!= tmp
)
1158 "uCode alternative %d not available, choosing %d\n",
1159 tmp
, wanted_alternative
);
1161 priv
->ucode_ver
= le32_to_cpu(ucode
->ver
);
1162 pieces
->build
= le32_to_cpu(ucode
->build
);
1165 len
-= sizeof(*ucode
);
1167 while (len
>= sizeof(*tlv
)) {
1170 len
-= sizeof(*tlv
);
1173 tlv_len
= le32_to_cpu(tlv
->length
);
1174 tlv_type
= le16_to_cpu(tlv
->type
);
1175 tlv_alt
= le16_to_cpu(tlv
->alternative
);
1176 tlv_data
= tlv
->data
;
1178 if (len
< tlv_len
) {
1179 IWL_ERR(priv
, "invalid TLV len: %zd/%u\n",
1183 len
-= ALIGN(tlv_len
, 4);
1184 data
+= sizeof(*tlv
) + ALIGN(tlv_len
, 4);
1187 * Alternative 0 is always valid.
1189 * Skip alternative TLVs that are not selected.
1191 if (tlv_alt
!= 0 && tlv_alt
!= wanted_alternative
)
1195 case IWL_UCODE_TLV_INST
:
1196 pieces
->inst
= tlv_data
;
1197 pieces
->inst_size
= tlv_len
;
1199 case IWL_UCODE_TLV_DATA
:
1200 pieces
->data
= tlv_data
;
1201 pieces
->data_size
= tlv_len
;
1203 case IWL_UCODE_TLV_INIT
:
1204 pieces
->init
= tlv_data
;
1205 pieces
->init_size
= tlv_len
;
1207 case IWL_UCODE_TLV_INIT_DATA
:
1208 pieces
->init_data
= tlv_data
;
1209 pieces
->init_data_size
= tlv_len
;
1211 case IWL_UCODE_TLV_BOOT
:
1212 IWL_ERR(priv
, "Found unexpected BOOT ucode\n");
1214 case IWL_UCODE_TLV_PROBE_MAX_LEN
:
1215 if (tlv_len
!= sizeof(u32
))
1216 goto invalid_tlv_len
;
1217 capa
->max_probe_length
=
1218 le32_to_cpup((__le32
*)tlv_data
);
1220 case IWL_UCODE_TLV_PAN
:
1222 goto invalid_tlv_len
;
1223 capa
->flags
|= IWL_UCODE_TLV_FLAGS_PAN
;
1225 case IWL_UCODE_TLV_FLAGS
:
1226 /* must be at least one u32 */
1227 if (tlv_len
< sizeof(u32
))
1228 goto invalid_tlv_len
;
1229 /* and a proper number of u32s */
1230 if (tlv_len
% sizeof(u32
))
1231 goto invalid_tlv_len
;
1233 * This driver only reads the first u32 as
1234 * right now no more features are defined,
1235 * if that changes then either the driver
1236 * will not work with the new firmware, or
1237 * it'll not take advantage of new features.
1239 capa
->flags
= le32_to_cpup((__le32
*)tlv_data
);
1241 case IWL_UCODE_TLV_INIT_EVTLOG_PTR
:
1242 if (tlv_len
!= sizeof(u32
))
1243 goto invalid_tlv_len
;
1244 pieces
->init_evtlog_ptr
=
1245 le32_to_cpup((__le32
*)tlv_data
);
1247 case IWL_UCODE_TLV_INIT_EVTLOG_SIZE
:
1248 if (tlv_len
!= sizeof(u32
))
1249 goto invalid_tlv_len
;
1250 pieces
->init_evtlog_size
=
1251 le32_to_cpup((__le32
*)tlv_data
);
1253 case IWL_UCODE_TLV_INIT_ERRLOG_PTR
:
1254 if (tlv_len
!= sizeof(u32
))
1255 goto invalid_tlv_len
;
1256 pieces
->init_errlog_ptr
=
1257 le32_to_cpup((__le32
*)tlv_data
);
1259 case IWL_UCODE_TLV_RUNT_EVTLOG_PTR
:
1260 if (tlv_len
!= sizeof(u32
))
1261 goto invalid_tlv_len
;
1262 pieces
->inst_evtlog_ptr
=
1263 le32_to_cpup((__le32
*)tlv_data
);
1265 case IWL_UCODE_TLV_RUNT_EVTLOG_SIZE
:
1266 if (tlv_len
!= sizeof(u32
))
1267 goto invalid_tlv_len
;
1268 pieces
->inst_evtlog_size
=
1269 le32_to_cpup((__le32
*)tlv_data
);
1271 case IWL_UCODE_TLV_RUNT_ERRLOG_PTR
:
1272 if (tlv_len
!= sizeof(u32
))
1273 goto invalid_tlv_len
;
1274 pieces
->inst_errlog_ptr
=
1275 le32_to_cpup((__le32
*)tlv_data
);
1277 case IWL_UCODE_TLV_ENHANCE_SENS_TBL
:
1279 goto invalid_tlv_len
;
1280 priv
->enhance_sensitivity_table
= true;
1282 case IWL_UCODE_TLV_PHY_CALIBRATION_SIZE
:
1283 if (tlv_len
!= sizeof(u32
))
1284 goto invalid_tlv_len
;
1285 capa
->standard_phy_calibration_size
=
1286 le32_to_cpup((__le32
*)tlv_data
);
1289 IWL_DEBUG_INFO(priv
, "unknown TLV: %d\n", tlv_type
);
1295 IWL_ERR(priv
, "invalid TLV after parsing: %zd\n", len
);
1296 iwl_print_hex_dump(priv
, IWL_DL_FW
, (u8
*)data
, len
);
1303 IWL_ERR(priv
, "TLV %d has invalid size: %u\n", tlv_type
, tlv_len
);
1304 iwl_print_hex_dump(priv
, IWL_DL_FW
, tlv_data
, tlv_len
);
1310 * iwl_ucode_callback - callback when firmware was loaded
1312 * If loaded successfully, copies the firmware into buffers
1313 * for the card to fetch (via DMA).
1315 static void iwl_ucode_callback(const struct firmware
*ucode_raw
, void *context
)
1317 struct iwl_priv
*priv
= context
;
1318 struct iwl_ucode_header
*ucode
;
1320 struct iwlagn_firmware_pieces pieces
;
1321 const unsigned int api_max
= priv
->cfg
->ucode_api_max
;
1322 const unsigned int api_min
= priv
->cfg
->ucode_api_min
;
1326 struct iwlagn_ucode_capabilities ucode_capa
= {
1327 .max_probe_length
= 200,
1328 .standard_phy_calibration_size
=
1329 IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE
,
1332 memset(&pieces
, 0, sizeof(pieces
));
1335 if (priv
->fw_index
<= priv
->cfg
->ucode_api_max
)
1337 "request for firmware file '%s' failed.\n",
1338 priv
->firmware_name
);
1342 IWL_DEBUG_INFO(priv
, "Loaded firmware file '%s' (%zd bytes).\n",
1343 priv
->firmware_name
, ucode_raw
->size
);
1345 /* Make sure that we got at least the API version number */
1346 if (ucode_raw
->size
< 4) {
1347 IWL_ERR(priv
, "File size way too small!\n");
1351 /* Data from ucode file: header followed by uCode images */
1352 ucode
= (struct iwl_ucode_header
*)ucode_raw
->data
;
1355 err
= iwlagn_load_legacy_firmware(priv
, ucode_raw
, &pieces
);
1357 err
= iwlagn_load_firmware(priv
, ucode_raw
, &pieces
,
1363 api_ver
= IWL_UCODE_API(priv
->ucode_ver
);
1364 build
= pieces
.build
;
1367 * api_ver should match the api version forming part of the
1368 * firmware filename ... but we don't check for that and only rely
1369 * on the API version read from firmware header from here on forward
1371 /* no api version check required for experimental uCode */
1372 if (priv
->fw_index
!= UCODE_EXPERIMENTAL_INDEX
) {
1373 if (api_ver
< api_min
|| api_ver
> api_max
) {
1375 "Driver unable to support your firmware API. "
1376 "Driver supports v%u, firmware is v%u.\n",
1381 if (api_ver
!= api_max
)
1383 "Firmware has old API version. Expected v%u, "
1384 "got v%u. New firmware can be obtained "
1385 "from http://www.intellinuxwireless.org.\n",
1390 sprintf(buildstr
, " build %u%s", build
,
1391 (priv
->fw_index
== UCODE_EXPERIMENTAL_INDEX
)
1396 IWL_INFO(priv
, "loaded firmware version %u.%u.%u.%u%s\n",
1397 IWL_UCODE_MAJOR(priv
->ucode_ver
),
1398 IWL_UCODE_MINOR(priv
->ucode_ver
),
1399 IWL_UCODE_API(priv
->ucode_ver
),
1400 IWL_UCODE_SERIAL(priv
->ucode_ver
),
1403 snprintf(priv
->hw
->wiphy
->fw_version
,
1404 sizeof(priv
->hw
->wiphy
->fw_version
),
1406 IWL_UCODE_MAJOR(priv
->ucode_ver
),
1407 IWL_UCODE_MINOR(priv
->ucode_ver
),
1408 IWL_UCODE_API(priv
->ucode_ver
),
1409 IWL_UCODE_SERIAL(priv
->ucode_ver
),
1413 * For any of the failures below (before allocating pci memory)
1414 * we will try to load a version with a smaller API -- maybe the
1415 * user just got a corrupted version of the latest API.
1418 IWL_DEBUG_INFO(priv
, "f/w package hdr ucode version raw = 0x%x\n",
1420 IWL_DEBUG_INFO(priv
, "f/w package hdr runtime inst size = %Zd\n",
1422 IWL_DEBUG_INFO(priv
, "f/w package hdr runtime data size = %Zd\n",
1424 IWL_DEBUG_INFO(priv
, "f/w package hdr init inst size = %Zd\n",
1426 IWL_DEBUG_INFO(priv
, "f/w package hdr init data size = %Zd\n",
1427 pieces
.init_data_size
);
1429 /* Verify that uCode images will fit in card's SRAM */
1430 if (pieces
.inst_size
> priv
->hw_params
.max_inst_size
) {
1431 IWL_ERR(priv
, "uCode instr len %Zd too large to fit in\n",
1436 if (pieces
.data_size
> priv
->hw_params
.max_data_size
) {
1437 IWL_ERR(priv
, "uCode data len %Zd too large to fit in\n",
1442 if (pieces
.init_size
> priv
->hw_params
.max_inst_size
) {
1443 IWL_ERR(priv
, "uCode init instr len %Zd too large to fit in\n",
1448 if (pieces
.init_data_size
> priv
->hw_params
.max_data_size
) {
1449 IWL_ERR(priv
, "uCode init data len %Zd too large to fit in\n",
1450 pieces
.init_data_size
);
1454 /* Allocate ucode buffers for card's bus-master loading ... */
1456 /* Runtime instructions and 2 copies of data:
1457 * 1) unmodified from disk
1458 * 2) backup cache for save/restore during power-downs */
1459 if (iwl_alloc_fw_desc(priv
, &priv
->ucode_rt
.code
,
1460 pieces
.inst
, pieces
.inst_size
))
1462 if (iwl_alloc_fw_desc(priv
, &priv
->ucode_rt
.data
,
1463 pieces
.data
, pieces
.data_size
))
1466 /* Initialization instructions and data */
1467 if (pieces
.init_size
&& pieces
.init_data_size
) {
1468 if (iwl_alloc_fw_desc(priv
, &priv
->ucode_init
.code
,
1469 pieces
.init
, pieces
.init_size
))
1471 if (iwl_alloc_fw_desc(priv
, &priv
->ucode_init
.data
,
1472 pieces
.init_data
, pieces
.init_data_size
))
1476 /* Now that we can no longer fail, copy information */
1479 * The (size - 16) / 12 formula is based on the information recorded
1480 * for each event, which is of mode 1 (including timestamp) for all
1481 * new microcodes that include this information.
1483 priv
->_agn
.init_evtlog_ptr
= pieces
.init_evtlog_ptr
;
1484 if (pieces
.init_evtlog_size
)
1485 priv
->_agn
.init_evtlog_size
= (pieces
.init_evtlog_size
- 16)/12;
1487 priv
->_agn
.init_evtlog_size
=
1488 priv
->cfg
->base_params
->max_event_log_size
;
1489 priv
->_agn
.init_errlog_ptr
= pieces
.init_errlog_ptr
;
1490 priv
->_agn
.inst_evtlog_ptr
= pieces
.inst_evtlog_ptr
;
1491 if (pieces
.inst_evtlog_size
)
1492 priv
->_agn
.inst_evtlog_size
= (pieces
.inst_evtlog_size
- 16)/12;
1494 priv
->_agn
.inst_evtlog_size
=
1495 priv
->cfg
->base_params
->max_event_log_size
;
1496 priv
->_agn
.inst_errlog_ptr
= pieces
.inst_errlog_ptr
;
1498 priv
->new_scan_threshold_behaviour
=
1499 !!(ucode_capa
.flags
& IWL_UCODE_TLV_FLAGS_NEWSCAN
);
1501 if ((priv
->cfg
->sku
& EEPROM_SKU_CAP_IPAN_ENABLE
) &&
1502 (ucode_capa
.flags
& IWL_UCODE_TLV_FLAGS_PAN
)) {
1503 priv
->valid_contexts
|= BIT(IWL_RXON_CTX_PAN
);
1504 priv
->sta_key_max_num
= STA_KEY_MAX_NUM_PAN
;
1506 priv
->sta_key_max_num
= STA_KEY_MAX_NUM
;
1508 if (priv
->valid_contexts
!= BIT(IWL_RXON_CTX_BSS
))
1509 priv
->cmd_queue
= IWL_IPAN_CMD_QUEUE_NUM
;
1511 priv
->cmd_queue
= IWL_DEFAULT_CMD_QUEUE_NUM
;
1514 * figure out the offset of chain noise reset and gain commands
1515 * base on the size of standard phy calibration commands table size
1517 if (ucode_capa
.standard_phy_calibration_size
>
1518 IWL_MAX_PHY_CALIBRATE_TBL_SIZE
)
1519 ucode_capa
.standard_phy_calibration_size
=
1520 IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE
;
1522 priv
->_agn
.phy_calib_chain_noise_reset_cmd
=
1523 ucode_capa
.standard_phy_calibration_size
;
1524 priv
->_agn
.phy_calib_chain_noise_gain_cmd
=
1525 ucode_capa
.standard_phy_calibration_size
+ 1;
1527 /**************************************************
1528 * This is still part of probe() in a sense...
1530 * 9. Setup and register with mac80211 and debugfs
1531 **************************************************/
1532 err
= iwl_mac_setup_register(priv
, &ucode_capa
);
1536 err
= iwl_dbgfs_register(priv
, DRV_NAME
);
1538 IWL_ERR(priv
, "failed to create debugfs files. Ignoring error: %d\n", err
);
1540 err
= sysfs_create_group(&(priv
->bus
.dev
->kobj
),
1541 &iwl_attribute_group
);
1543 IWL_ERR(priv
, "failed to create sysfs device attributes\n");
1547 /* We have our copies now, allow OS release its copies */
1548 release_firmware(ucode_raw
);
1549 complete(&priv
->_agn
.firmware_loading_complete
);
1553 /* try next, if any */
1554 if (iwl_request_firmware(priv
, false))
1556 release_firmware(ucode_raw
);
1560 IWL_ERR(priv
, "failed to allocate pci memory\n");
1561 iwl_dealloc_ucode(priv
);
1563 complete(&priv
->_agn
.firmware_loading_complete
);
1564 device_release_driver(priv
->bus
.dev
);
1565 release_firmware(ucode_raw
);
1568 static const char *desc_lookup_text
[] = {
1573 "NMI_INTERRUPT_WDG",
1577 "HW_ERROR_TUNE_LOCK",
1578 "HW_ERROR_TEMPERATURE",
1579 "ILLEGAL_CHAN_FREQ",
1582 "NMI_INTERRUPT_HOST",
1583 "NMI_INTERRUPT_ACTION_PT",
1584 "NMI_INTERRUPT_UNKNOWN",
1585 "UCODE_VERSION_MISMATCH",
1586 "HW_ERROR_ABS_LOCK",
1587 "HW_ERROR_CAL_LOCK_FAIL",
1588 "NMI_INTERRUPT_INST_ACTION_PT",
1589 "NMI_INTERRUPT_DATA_ACTION_PT",
1591 "NMI_INTERRUPT_TRM",
1592 "NMI_INTERRUPT_BREAK_POINT"
1599 static struct { char *name
; u8 num
; } advanced_lookup
[] = {
1600 { "NMI_INTERRUPT_WDG", 0x34 },
1601 { "SYSASSERT", 0x35 },
1602 { "UCODE_VERSION_MISMATCH", 0x37 },
1603 { "BAD_COMMAND", 0x38 },
1604 { "NMI_INTERRUPT_DATA_ACTION_PT", 0x3C },
1605 { "FATAL_ERROR", 0x3D },
1606 { "NMI_TRM_HW_ERR", 0x46 },
1607 { "NMI_INTERRUPT_TRM", 0x4C },
1608 { "NMI_INTERRUPT_BREAK_POINT", 0x54 },
1609 { "NMI_INTERRUPT_WDG_RXF_FULL", 0x5C },
1610 { "NMI_INTERRUPT_WDG_NO_RBD_RXF_FULL", 0x64 },
1611 { "NMI_INTERRUPT_HOST", 0x66 },
1612 { "NMI_INTERRUPT_ACTION_PT", 0x7C },
1613 { "NMI_INTERRUPT_UNKNOWN", 0x84 },
1614 { "NMI_INTERRUPT_INST_ACTION_PT", 0x86 },
1615 { "ADVANCED_SYSASSERT", 0 },
1618 static const char *desc_lookup(u32 num
)
1621 int max
= ARRAY_SIZE(desc_lookup_text
);
1624 return desc_lookup_text
[num
];
1626 max
= ARRAY_SIZE(advanced_lookup
) - 1;
1627 for (i
= 0; i
< max
; i
++) {
1628 if (advanced_lookup
[i
].num
== num
)
1631 return advanced_lookup
[i
].name
;
1634 #define ERROR_START_OFFSET (1 * sizeof(u32))
1635 #define ERROR_ELEM_SIZE (7 * sizeof(u32))
1637 void iwl_dump_nic_error_log(struct iwl_priv
*priv
)
1640 struct iwl_error_event_table table
;
1642 base
= priv
->device_pointers
.error_event_table
;
1643 if (priv
->ucode_type
== IWL_UCODE_INIT
) {
1645 base
= priv
->_agn
.init_errlog_ptr
;
1648 base
= priv
->_agn
.inst_errlog_ptr
;
1651 if (!priv
->cfg
->ops
->lib
->is_valid_rtc_data_addr(base
)) {
1653 "Not valid error log pointer 0x%08X for %s uCode\n",
1655 (priv
->ucode_type
== IWL_UCODE_INIT
)
1660 iwl_read_targ_mem_words(priv
, base
, &table
, sizeof(table
));
1662 if (ERROR_START_OFFSET
<= table
.valid
* ERROR_ELEM_SIZE
) {
1663 IWL_ERR(priv
, "Start IWL Error Log Dump:\n");
1664 IWL_ERR(priv
, "Status: 0x%08lX, count: %d\n",
1665 priv
->status
, table
.valid
);
1668 priv
->isr_stats
.err_code
= table
.error_id
;
1670 trace_iwlwifi_dev_ucode_error(priv
, table
.error_id
, table
.tsf_low
,
1671 table
.data1
, table
.data2
, table
.line
,
1672 table
.blink1
, table
.blink2
, table
.ilink1
,
1673 table
.ilink2
, table
.bcon_time
, table
.gp1
,
1674 table
.gp2
, table
.gp3
, table
.ucode_ver
,
1675 table
.hw_ver
, table
.brd_ver
);
1676 IWL_ERR(priv
, "0x%08X | %-28s\n", table
.error_id
,
1677 desc_lookup(table
.error_id
));
1678 IWL_ERR(priv
, "0x%08X | uPc\n", table
.pc
);
1679 IWL_ERR(priv
, "0x%08X | branchlink1\n", table
.blink1
);
1680 IWL_ERR(priv
, "0x%08X | branchlink2\n", table
.blink2
);
1681 IWL_ERR(priv
, "0x%08X | interruptlink1\n", table
.ilink1
);
1682 IWL_ERR(priv
, "0x%08X | interruptlink2\n", table
.ilink2
);
1683 IWL_ERR(priv
, "0x%08X | data1\n", table
.data1
);
1684 IWL_ERR(priv
, "0x%08X | data2\n", table
.data2
);
1685 IWL_ERR(priv
, "0x%08X | line\n", table
.line
);
1686 IWL_ERR(priv
, "0x%08X | beacon time\n", table
.bcon_time
);
1687 IWL_ERR(priv
, "0x%08X | tsf low\n", table
.tsf_low
);
1688 IWL_ERR(priv
, "0x%08X | tsf hi\n", table
.tsf_hi
);
1689 IWL_ERR(priv
, "0x%08X | time gp1\n", table
.gp1
);
1690 IWL_ERR(priv
, "0x%08X | time gp2\n", table
.gp2
);
1691 IWL_ERR(priv
, "0x%08X | time gp3\n", table
.gp3
);
1692 IWL_ERR(priv
, "0x%08X | uCode version\n", table
.ucode_ver
);
1693 IWL_ERR(priv
, "0x%08X | hw version\n", table
.hw_ver
);
1694 IWL_ERR(priv
, "0x%08X | board version\n", table
.brd_ver
);
1695 IWL_ERR(priv
, "0x%08X | hcmd\n", table
.hcmd
);
1698 #define EVENT_START_OFFSET (4 * sizeof(u32))
1701 * iwl_print_event_log - Dump error event log to syslog
1704 static int iwl_print_event_log(struct iwl_priv
*priv
, u32 start_idx
,
1705 u32 num_events
, u32 mode
,
1706 int pos
, char **buf
, size_t bufsz
)
1709 u32 base
; /* SRAM byte address of event log header */
1710 u32 event_size
; /* 2 u32s, or 3 u32s if timestamp recorded */
1711 u32 ptr
; /* SRAM byte address of log data */
1712 u32 ev
, time
, data
; /* event log data */
1713 unsigned long reg_flags
;
1715 if (num_events
== 0)
1718 base
= priv
->device_pointers
.log_event_table
;
1719 if (priv
->ucode_type
== IWL_UCODE_INIT
) {
1721 base
= priv
->_agn
.init_evtlog_ptr
;
1724 base
= priv
->_agn
.inst_evtlog_ptr
;
1728 event_size
= 2 * sizeof(u32
);
1730 event_size
= 3 * sizeof(u32
);
1732 ptr
= base
+ EVENT_START_OFFSET
+ (start_idx
* event_size
);
1734 /* Make sure device is powered up for SRAM reads */
1735 spin_lock_irqsave(&priv
->reg_lock
, reg_flags
);
1736 iwl_grab_nic_access(priv
);
1738 /* Set starting address; reads will auto-increment */
1739 iwl_write32(priv
, HBUS_TARG_MEM_RADDR
, ptr
);
1742 /* "time" is actually "data" for mode 0 (no timestamp).
1743 * place event id # at far right for easier visual parsing. */
1744 for (i
= 0; i
< num_events
; i
++) {
1745 ev
= iwl_read32(priv
, HBUS_TARG_MEM_RDAT
);
1746 time
= iwl_read32(priv
, HBUS_TARG_MEM_RDAT
);
1750 pos
+= scnprintf(*buf
+ pos
, bufsz
- pos
,
1751 "EVT_LOG:0x%08x:%04u\n",
1754 trace_iwlwifi_dev_ucode_event(priv
, 0,
1756 IWL_ERR(priv
, "EVT_LOG:0x%08x:%04u\n",
1760 data
= iwl_read32(priv
, HBUS_TARG_MEM_RDAT
);
1762 pos
+= scnprintf(*buf
+ pos
, bufsz
- pos
,
1763 "EVT_LOGT:%010u:0x%08x:%04u\n",
1766 IWL_ERR(priv
, "EVT_LOGT:%010u:0x%08x:%04u\n",
1768 trace_iwlwifi_dev_ucode_event(priv
, time
,
1774 /* Allow device to power down */
1775 iwl_release_nic_access(priv
);
1776 spin_unlock_irqrestore(&priv
->reg_lock
, reg_flags
);
1781 * iwl_print_last_event_logs - Dump the newest # of event log to syslog
1783 static int iwl_print_last_event_logs(struct iwl_priv
*priv
, u32 capacity
,
1784 u32 num_wraps
, u32 next_entry
,
1786 int pos
, char **buf
, size_t bufsz
)
1789 * display the newest DEFAULT_LOG_ENTRIES entries
1790 * i.e the entries just before the next ont that uCode would fill.
1793 if (next_entry
< size
) {
1794 pos
= iwl_print_event_log(priv
,
1795 capacity
- (size
- next_entry
),
1796 size
- next_entry
, mode
,
1798 pos
= iwl_print_event_log(priv
, 0,
1802 pos
= iwl_print_event_log(priv
, next_entry
- size
,
1803 size
, mode
, pos
, buf
, bufsz
);
1805 if (next_entry
< size
) {
1806 pos
= iwl_print_event_log(priv
, 0, next_entry
,
1807 mode
, pos
, buf
, bufsz
);
1809 pos
= iwl_print_event_log(priv
, next_entry
- size
,
1810 size
, mode
, pos
, buf
, bufsz
);
1816 #define DEFAULT_DUMP_EVENT_LOG_ENTRIES (20)
1818 int iwl_dump_nic_event_log(struct iwl_priv
*priv
, bool full_log
,
1819 char **buf
, bool display
)
1821 u32 base
; /* SRAM byte address of event log header */
1822 u32 capacity
; /* event log capacity in # entries */
1823 u32 mode
; /* 0 - no timestamp, 1 - timestamp recorded */
1824 u32 num_wraps
; /* # times uCode wrapped to top of log */
1825 u32 next_entry
; /* index of next entry to be written by uCode */
1826 u32 size
; /* # entries that we'll print */
1831 base
= priv
->device_pointers
.log_event_table
;
1832 if (priv
->ucode_type
== IWL_UCODE_INIT
) {
1833 logsize
= priv
->_agn
.init_evtlog_size
;
1835 base
= priv
->_agn
.init_evtlog_ptr
;
1837 logsize
= priv
->_agn
.inst_evtlog_size
;
1839 base
= priv
->_agn
.inst_evtlog_ptr
;
1842 if (!priv
->cfg
->ops
->lib
->is_valid_rtc_data_addr(base
)) {
1844 "Invalid event log pointer 0x%08X for %s uCode\n",
1846 (priv
->ucode_type
== IWL_UCODE_INIT
)
1851 /* event log header */
1852 capacity
= iwl_read_targ_mem(priv
, base
);
1853 mode
= iwl_read_targ_mem(priv
, base
+ (1 * sizeof(u32
)));
1854 num_wraps
= iwl_read_targ_mem(priv
, base
+ (2 * sizeof(u32
)));
1855 next_entry
= iwl_read_targ_mem(priv
, base
+ (3 * sizeof(u32
)));
1857 if (capacity
> logsize
) {
1858 IWL_ERR(priv
, "Log capacity %d is bogus, limit to %d entries\n",
1863 if (next_entry
> logsize
) {
1864 IWL_ERR(priv
, "Log write index %d is bogus, limit to %d\n",
1865 next_entry
, logsize
);
1866 next_entry
= logsize
;
1869 size
= num_wraps
? capacity
: next_entry
;
1871 /* bail out if nothing in log */
1873 IWL_ERR(priv
, "Start IWL Event Log Dump: nothing in log\n");
1877 /* enable/disable bt channel inhibition */
1878 priv
->bt_ch_announce
= iwlagn_bt_ch_announce
;
1880 #ifdef CONFIG_IWLWIFI_DEBUG
1881 if (!(iwl_get_debug_level(priv
) & IWL_DL_FW_ERRORS
) && !full_log
)
1882 size
= (size
> DEFAULT_DUMP_EVENT_LOG_ENTRIES
)
1883 ? DEFAULT_DUMP_EVENT_LOG_ENTRIES
: size
;
1885 size
= (size
> DEFAULT_DUMP_EVENT_LOG_ENTRIES
)
1886 ? DEFAULT_DUMP_EVENT_LOG_ENTRIES
: size
;
1888 IWL_ERR(priv
, "Start IWL Event Log Dump: display last %u entries\n",
1891 #ifdef CONFIG_IWLWIFI_DEBUG
1894 bufsz
= capacity
* 48;
1897 *buf
= kmalloc(bufsz
, GFP_KERNEL
);
1901 if ((iwl_get_debug_level(priv
) & IWL_DL_FW_ERRORS
) || full_log
) {
1903 * if uCode has wrapped back to top of log,
1904 * start at the oldest entry,
1905 * i.e the next one that uCode would fill.
1908 pos
= iwl_print_event_log(priv
, next_entry
,
1909 capacity
- next_entry
, mode
,
1911 /* (then/else) start at top of log */
1912 pos
= iwl_print_event_log(priv
, 0,
1913 next_entry
, mode
, pos
, buf
, bufsz
);
1915 pos
= iwl_print_last_event_logs(priv
, capacity
, num_wraps
,
1916 next_entry
, size
, mode
,
1919 pos
= iwl_print_last_event_logs(priv
, capacity
, num_wraps
,
1920 next_entry
, size
, mode
,
1926 static void iwl_rf_kill_ct_config(struct iwl_priv
*priv
)
1928 struct iwl_ct_kill_config cmd
;
1929 struct iwl_ct_kill_throttling_config adv_cmd
;
1930 unsigned long flags
;
1933 spin_lock_irqsave(&priv
->lock
, flags
);
1934 iwl_write32(priv
, CSR_UCODE_DRV_GP1_CLR
,
1935 CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT
);
1936 spin_unlock_irqrestore(&priv
->lock
, flags
);
1937 priv
->thermal_throttle
.ct_kill_toggle
= false;
1939 if (priv
->cfg
->base_params
->support_ct_kill_exit
) {
1940 adv_cmd
.critical_temperature_enter
=
1941 cpu_to_le32(priv
->hw_params
.ct_kill_threshold
);
1942 adv_cmd
.critical_temperature_exit
=
1943 cpu_to_le32(priv
->hw_params
.ct_kill_exit_threshold
);
1945 ret
= trans_send_cmd_pdu(priv
,
1946 REPLY_CT_KILL_CONFIG_CMD
,
1947 CMD_SYNC
, sizeof(adv_cmd
), &adv_cmd
);
1949 IWL_ERR(priv
, "REPLY_CT_KILL_CONFIG_CMD failed\n");
1951 IWL_DEBUG_INFO(priv
, "REPLY_CT_KILL_CONFIG_CMD "
1953 "critical temperature enter is %d,"
1955 priv
->hw_params
.ct_kill_threshold
,
1956 priv
->hw_params
.ct_kill_exit_threshold
);
1958 cmd
.critical_temperature_R
=
1959 cpu_to_le32(priv
->hw_params
.ct_kill_threshold
);
1961 ret
= trans_send_cmd_pdu(priv
,
1962 REPLY_CT_KILL_CONFIG_CMD
,
1963 CMD_SYNC
, sizeof(cmd
), &cmd
);
1965 IWL_ERR(priv
, "REPLY_CT_KILL_CONFIG_CMD failed\n");
1967 IWL_DEBUG_INFO(priv
, "REPLY_CT_KILL_CONFIG_CMD "
1969 "critical temperature is %d\n",
1970 priv
->hw_params
.ct_kill_threshold
);
1974 static int iwlagn_send_calib_cfg_rt(struct iwl_priv
*priv
, u32 cfg
)
1976 struct iwl_calib_cfg_cmd calib_cfg_cmd
;
1977 struct iwl_host_cmd cmd
= {
1978 .id
= CALIBRATION_CFG_CMD
,
1979 .len
= { sizeof(struct iwl_calib_cfg_cmd
), },
1980 .data
= { &calib_cfg_cmd
, },
1983 memset(&calib_cfg_cmd
, 0, sizeof(calib_cfg_cmd
));
1984 calib_cfg_cmd
.ucd_calib_cfg
.once
.is_enable
= IWL_CALIB_INIT_CFG_ALL
;
1985 calib_cfg_cmd
.ucd_calib_cfg
.once
.start
= cpu_to_le32(cfg
);
1987 return trans_send_cmd(priv
, &cmd
);
1992 * iwl_alive_start - called after REPLY_ALIVE notification received
1993 * from protocol/runtime uCode (initialization uCode's
1994 * Alive gets handled by iwl_init_alive_start()).
1996 int iwl_alive_start(struct iwl_priv
*priv
)
1999 struct iwl_rxon_context
*ctx
= &priv
->contexts
[IWL_RXON_CTX_BSS
];
2001 iwl_reset_ict(priv
);
2003 IWL_DEBUG_INFO(priv
, "Runtime Alive received.\n");
2005 /* After the ALIVE response, we can send host commands to the uCode */
2006 set_bit(STATUS_ALIVE
, &priv
->status
);
2008 /* Enable watchdog to monitor the driver tx queues */
2009 iwl_setup_watchdog(priv
);
2011 if (iwl_is_rfkill(priv
))
2014 /* download priority table before any calibration request */
2015 if (priv
->cfg
->bt_params
&&
2016 priv
->cfg
->bt_params
->advanced_bt_coexist
) {
2017 /* Configure Bluetooth device coexistence support */
2018 priv
->bt_valid
= IWLAGN_BT_ALL_VALID_MSK
;
2019 priv
->kill_ack_mask
= IWLAGN_BT_KILL_ACK_MASK_DEFAULT
;
2020 priv
->kill_cts_mask
= IWLAGN_BT_KILL_CTS_MASK_DEFAULT
;
2021 iwlagn_send_advance_bt_config(priv
);
2022 priv
->bt_valid
= IWLAGN_BT_VALID_ENABLE_FLAGS
;
2023 iwlagn_send_prio_tbl(priv
);
2025 /* FIXME: w/a to force change uCode BT state machine */
2026 ret
= iwlagn_send_bt_env(priv
, IWL_BT_COEX_ENV_OPEN
,
2027 BT_COEX_PRIO_TBL_EVT_INIT_CALIB2
);
2030 ret
= iwlagn_send_bt_env(priv
, IWL_BT_COEX_ENV_CLOSE
,
2031 BT_COEX_PRIO_TBL_EVT_INIT_CALIB2
);
2036 * default is 2-wire BT coexexistence support
2038 iwl_send_bt_config(priv
);
2041 if (priv
->hw_params
.calib_rt_cfg
)
2042 iwlagn_send_calib_cfg_rt(priv
, priv
->hw_params
.calib_rt_cfg
);
2044 ieee80211_wake_queues(priv
->hw
);
2046 priv
->active_rate
= IWL_RATES_MASK
;
2048 /* Configure Tx antenna selection based on H/W config */
2049 iwlagn_send_tx_ant_config(priv
, priv
->cfg
->valid_tx_ant
);
2051 if (iwl_is_associated_ctx(ctx
)) {
2052 struct iwl_rxon_cmd
*active_rxon
=
2053 (struct iwl_rxon_cmd
*)&ctx
->active
;
2054 /* apply any changes in staging */
2055 ctx
->staging
.filter_flags
|= RXON_FILTER_ASSOC_MSK
;
2056 active_rxon
->filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
2058 struct iwl_rxon_context
*tmp
;
2059 /* Initialize our rx_config data */
2060 for_each_context(priv
, tmp
)
2061 iwl_connection_init_rx_config(priv
, tmp
);
2063 iwlagn_set_rxon_chain(priv
, ctx
);
2066 iwl_reset_run_time_calib(priv
);
2068 set_bit(STATUS_READY
, &priv
->status
);
2070 /* Configure the adapter for unassociated operation */
2071 ret
= iwlagn_commit_rxon(priv
, ctx
);
2075 /* At this point, the NIC is initialized and operational */
2076 iwl_rf_kill_ct_config(priv
);
2078 IWL_DEBUG_INFO(priv
, "ALIVE processing complete.\n");
2080 return iwl_power_update_mode(priv
, true);
2083 static void iwl_cancel_deferred_work(struct iwl_priv
*priv
);
2085 static void __iwl_down(struct iwl_priv
*priv
)
2089 IWL_DEBUG_INFO(priv
, DRV_NAME
" is going down\n");
2091 iwl_scan_cancel_timeout(priv
, 200);
2093 exit_pending
= test_and_set_bit(STATUS_EXIT_PENDING
, &priv
->status
);
2095 /* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set
2096 * to prevent rearm timer */
2097 del_timer_sync(&priv
->watchdog
);
2099 iwl_clear_ucode_stations(priv
, NULL
);
2100 iwl_dealloc_bcast_stations(priv
);
2101 iwl_clear_driver_stations(priv
);
2103 /* reset BT coex data */
2104 priv
->bt_status
= 0;
2105 if (priv
->cfg
->bt_params
)
2106 priv
->bt_traffic_load
=
2107 priv
->cfg
->bt_params
->bt_init_traffic_load
;
2109 priv
->bt_traffic_load
= 0;
2110 priv
->bt_full_concurrent
= false;
2111 priv
->bt_ci_compliance
= 0;
2113 /* Wipe out the EXIT_PENDING status bit if we are not actually
2114 * exiting the module */
2116 clear_bit(STATUS_EXIT_PENDING
, &priv
->status
);
2118 if (priv
->mac80211_registered
)
2119 ieee80211_stop_queues(priv
->hw
);
2121 /* Clear out all status bits but a few that are stable across reset */
2122 priv
->status
&= test_bit(STATUS_RF_KILL_HW
, &priv
->status
) <<
2124 test_bit(STATUS_GEO_CONFIGURED
, &priv
->status
) <<
2125 STATUS_GEO_CONFIGURED
|
2126 test_bit(STATUS_FW_ERROR
, &priv
->status
) <<
2128 test_bit(STATUS_EXIT_PENDING
, &priv
->status
) <<
2129 STATUS_EXIT_PENDING
;
2131 iwlagn_stop_device(priv
);
2133 dev_kfree_skb(priv
->beacon_skb
);
2134 priv
->beacon_skb
= NULL
;
2137 static void iwl_down(struct iwl_priv
*priv
)
2139 mutex_lock(&priv
->mutex
);
2141 mutex_unlock(&priv
->mutex
);
2143 iwl_cancel_deferred_work(priv
);
2146 #define HW_READY_TIMEOUT (50)
2148 /* Note: returns poll_bit return value, which is >= 0 if success */
2149 static int iwl_set_hw_ready(struct iwl_priv
*priv
)
2153 iwl_set_bit(priv
, CSR_HW_IF_CONFIG_REG
,
2154 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY
);
2156 /* See if we got it */
2157 ret
= iwl_poll_bit(priv
, CSR_HW_IF_CONFIG_REG
,
2158 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY
,
2159 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY
,
2162 IWL_DEBUG_INFO(priv
, "hardware%s ready\n", ret
< 0 ? " not" : "");
2166 /* Note: returns standard 0/-ERROR code */
2167 int iwl_prepare_card_hw(struct iwl_priv
*priv
)
2171 IWL_DEBUG_INFO(priv
, "iwl_prepare_card_hw enter\n");
2173 ret
= iwl_set_hw_ready(priv
);
2177 /* If HW is not ready, prepare the conditions to check again */
2178 iwl_set_bit(priv
, CSR_HW_IF_CONFIG_REG
,
2179 CSR_HW_IF_CONFIG_REG_PREPARE
);
2181 ret
= iwl_poll_bit(priv
, CSR_HW_IF_CONFIG_REG
,
2182 ~CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE
,
2183 CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE
, 150000);
2188 /* HW should be ready by now, check again. */
2189 ret
= iwl_set_hw_ready(priv
);
2195 #define MAX_HW_RESTARTS 5
2197 static int __iwl_up(struct iwl_priv
*priv
)
2199 struct iwl_rxon_context
*ctx
;
2202 lockdep_assert_held(&priv
->mutex
);
2204 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
)) {
2205 IWL_WARN(priv
, "Exit pending; will not bring the NIC up\n");
2209 for_each_context(priv
, ctx
) {
2210 ret
= iwlagn_alloc_bcast_station(priv
, ctx
);
2212 iwl_dealloc_bcast_stations(priv
);
2217 ret
= iwlagn_run_init_ucode(priv
);
2219 IWL_ERR(priv
, "Failed to run INIT ucode: %d\n", ret
);
2223 ret
= iwlagn_load_ucode_wait_alive(priv
,
2227 IWL_ERR(priv
, "Failed to start RT ucode: %d\n", ret
);
2231 ret
= iwl_alive_start(priv
);
2237 set_bit(STATUS_EXIT_PENDING
, &priv
->status
);
2239 clear_bit(STATUS_EXIT_PENDING
, &priv
->status
);
2241 IWL_ERR(priv
, "Unable to initialize device.\n");
2246 /*****************************************************************************
2248 * Workqueue callbacks
2250 *****************************************************************************/
2252 static void iwl_bg_run_time_calib_work(struct work_struct
*work
)
2254 struct iwl_priv
*priv
= container_of(work
, struct iwl_priv
,
2255 run_time_calib_work
);
2257 mutex_lock(&priv
->mutex
);
2259 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
) ||
2260 test_bit(STATUS_SCANNING
, &priv
->status
)) {
2261 mutex_unlock(&priv
->mutex
);
2265 if (priv
->start_calib
) {
2266 iwl_chain_noise_calibration(priv
);
2267 iwl_sensitivity_calibration(priv
);
2270 mutex_unlock(&priv
->mutex
);
2273 static void iwlagn_prepare_restart(struct iwl_priv
*priv
)
2275 struct iwl_rxon_context
*ctx
;
2276 bool bt_full_concurrent
;
2277 u8 bt_ci_compliance
;
2281 lockdep_assert_held(&priv
->mutex
);
2283 for_each_context(priv
, ctx
)
2288 * __iwl_down() will clear the BT status variables,
2289 * which is correct, but when we restart we really
2290 * want to keep them so restore them afterwards.
2292 * The restart process will later pick them up and
2293 * re-configure the hw when we reconfigure the BT
2296 bt_full_concurrent
= priv
->bt_full_concurrent
;
2297 bt_ci_compliance
= priv
->bt_ci_compliance
;
2298 bt_load
= priv
->bt_traffic_load
;
2299 bt_status
= priv
->bt_status
;
2303 priv
->bt_full_concurrent
= bt_full_concurrent
;
2304 priv
->bt_ci_compliance
= bt_ci_compliance
;
2305 priv
->bt_traffic_load
= bt_load
;
2306 priv
->bt_status
= bt_status
;
2309 static void iwl_bg_restart(struct work_struct
*data
)
2311 struct iwl_priv
*priv
= container_of(data
, struct iwl_priv
, restart
);
2313 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
2316 if (test_and_clear_bit(STATUS_FW_ERROR
, &priv
->status
)) {
2317 mutex_lock(&priv
->mutex
);
2318 iwlagn_prepare_restart(priv
);
2319 mutex_unlock(&priv
->mutex
);
2320 iwl_cancel_deferred_work(priv
);
2321 ieee80211_restart_hw(priv
->hw
);
2327 static void iwl_bg_rx_replenish(struct work_struct
*data
)
2329 struct iwl_priv
*priv
=
2330 container_of(data
, struct iwl_priv
, rx_replenish
);
2332 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
2335 mutex_lock(&priv
->mutex
);
2336 iwlagn_rx_replenish(priv
);
2337 mutex_unlock(&priv
->mutex
);
2340 static int iwl_mac_offchannel_tx(struct ieee80211_hw
*hw
, struct sk_buff
*skb
,
2341 struct ieee80211_channel
*chan
,
2342 enum nl80211_channel_type channel_type
,
2345 struct iwl_priv
*priv
= hw
->priv
;
2348 /* Not supported if we don't have PAN */
2349 if (!(priv
->valid_contexts
& BIT(IWL_RXON_CTX_PAN
))) {
2354 /* Not supported on pre-P2P firmware */
2355 if (!(priv
->contexts
[IWL_RXON_CTX_PAN
].interface_modes
&
2356 BIT(NL80211_IFTYPE_P2P_CLIENT
))) {
2361 mutex_lock(&priv
->mutex
);
2363 if (!priv
->contexts
[IWL_RXON_CTX_PAN
].is_active
) {
2365 * If the PAN context is free, use the normal
2366 * way of doing remain-on-channel offload + TX.
2372 /* TODO: queue up if scanning? */
2373 if (test_bit(STATUS_SCANNING
, &priv
->status
) ||
2374 priv
->_agn
.offchan_tx_skb
) {
2380 * max_scan_ie_len doesn't include the blank SSID or the header,
2381 * so need to add that again here.
2383 if (skb
->len
> hw
->wiphy
->max_scan_ie_len
+ 24 + 2) {
2388 priv
->_agn
.offchan_tx_skb
= skb
;
2389 priv
->_agn
.offchan_tx_timeout
= wait
;
2390 priv
->_agn
.offchan_tx_chan
= chan
;
2392 ret
= iwl_scan_initiate(priv
, priv
->contexts
[IWL_RXON_CTX_PAN
].vif
,
2393 IWL_SCAN_OFFCH_TX
, chan
->band
);
2395 priv
->_agn
.offchan_tx_skb
= NULL
;
2397 mutex_unlock(&priv
->mutex
);
2405 static int iwl_mac_offchannel_tx_cancel_wait(struct ieee80211_hw
*hw
)
2407 struct iwl_priv
*priv
= hw
->priv
;
2410 mutex_lock(&priv
->mutex
);
2412 if (!priv
->_agn
.offchan_tx_skb
) {
2417 priv
->_agn
.offchan_tx_skb
= NULL
;
2419 ret
= iwl_scan_cancel_timeout(priv
, 200);
2423 mutex_unlock(&priv
->mutex
);
2428 /*****************************************************************************
2430 * mac80211 entry point functions
2432 *****************************************************************************/
2434 static const struct ieee80211_iface_limit iwlagn_sta_ap_limits
[] = {
2437 .types
= BIT(NL80211_IFTYPE_STATION
),
2441 .types
= BIT(NL80211_IFTYPE_AP
),
2445 static const struct ieee80211_iface_limit iwlagn_2sta_limits
[] = {
2448 .types
= BIT(NL80211_IFTYPE_STATION
),
2452 static const struct ieee80211_iface_limit iwlagn_p2p_sta_go_limits
[] = {
2455 .types
= BIT(NL80211_IFTYPE_STATION
),
2459 .types
= BIT(NL80211_IFTYPE_P2P_GO
) |
2460 BIT(NL80211_IFTYPE_AP
),
2464 static const struct ieee80211_iface_limit iwlagn_p2p_2sta_limits
[] = {
2467 .types
= BIT(NL80211_IFTYPE_STATION
),
2471 .types
= BIT(NL80211_IFTYPE_P2P_CLIENT
),
2475 static const struct ieee80211_iface_combination
2476 iwlagn_iface_combinations_dualmode
[] = {
2477 { .num_different_channels
= 1,
2478 .max_interfaces
= 2,
2479 .beacon_int_infra_match
= true,
2480 .limits
= iwlagn_sta_ap_limits
,
2481 .n_limits
= ARRAY_SIZE(iwlagn_sta_ap_limits
),
2483 { .num_different_channels
= 1,
2484 .max_interfaces
= 2,
2485 .limits
= iwlagn_2sta_limits
,
2486 .n_limits
= ARRAY_SIZE(iwlagn_2sta_limits
),
2490 static const struct ieee80211_iface_combination
2491 iwlagn_iface_combinations_p2p
[] = {
2492 { .num_different_channels
= 1,
2493 .max_interfaces
= 2,
2494 .beacon_int_infra_match
= true,
2495 .limits
= iwlagn_p2p_sta_go_limits
,
2496 .n_limits
= ARRAY_SIZE(iwlagn_p2p_sta_go_limits
),
2498 { .num_different_channels
= 1,
2499 .max_interfaces
= 2,
2500 .limits
= iwlagn_p2p_2sta_limits
,
2501 .n_limits
= ARRAY_SIZE(iwlagn_p2p_2sta_limits
),
2506 * Not a mac80211 entry point function, but it fits in with all the
2507 * other mac80211 functions grouped here.
2509 static int iwl_mac_setup_register(struct iwl_priv
*priv
,
2510 struct iwlagn_ucode_capabilities
*capa
)
2513 struct ieee80211_hw
*hw
= priv
->hw
;
2514 struct iwl_rxon_context
*ctx
;
2516 hw
->rate_control_algorithm
= "iwl-agn-rs";
2518 /* Tell mac80211 our characteristics */
2519 hw
->flags
= IEEE80211_HW_SIGNAL_DBM
|
2520 IEEE80211_HW_AMPDU_AGGREGATION
|
2521 IEEE80211_HW_NEED_DTIM_PERIOD
|
2522 IEEE80211_HW_SPECTRUM_MGMT
|
2523 IEEE80211_HW_REPORTS_TX_ACK_STATUS
;
2525 hw
->max_tx_aggregation_subframes
= LINK_QUAL_AGG_FRAME_LIMIT_DEF
;
2527 hw
->flags
|= IEEE80211_HW_SUPPORTS_PS
|
2528 IEEE80211_HW_SUPPORTS_DYNAMIC_PS
;
2530 if (priv
->cfg
->sku
& EEPROM_SKU_CAP_11N_ENABLE
)
2531 hw
->flags
|= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS
|
2532 IEEE80211_HW_SUPPORTS_STATIC_SMPS
;
2534 if (capa
->flags
& IWL_UCODE_TLV_FLAGS_MFP
)
2535 hw
->flags
|= IEEE80211_HW_MFP_CAPABLE
;
2537 hw
->sta_data_size
= sizeof(struct iwl_station_priv
);
2538 hw
->vif_data_size
= sizeof(struct iwl_vif_priv
);
2540 for_each_context(priv
, ctx
) {
2541 hw
->wiphy
->interface_modes
|= ctx
->interface_modes
;
2542 hw
->wiphy
->interface_modes
|= ctx
->exclusive_interface_modes
;
2545 BUILD_BUG_ON(NUM_IWL_RXON_CTX
!= 2);
2547 if (hw
->wiphy
->interface_modes
& BIT(NL80211_IFTYPE_P2P_CLIENT
)) {
2548 hw
->wiphy
->iface_combinations
= iwlagn_iface_combinations_p2p
;
2549 hw
->wiphy
->n_iface_combinations
=
2550 ARRAY_SIZE(iwlagn_iface_combinations_p2p
);
2551 } else if (hw
->wiphy
->interface_modes
& BIT(NL80211_IFTYPE_AP
)) {
2552 hw
->wiphy
->iface_combinations
= iwlagn_iface_combinations_dualmode
;
2553 hw
->wiphy
->n_iface_combinations
=
2554 ARRAY_SIZE(iwlagn_iface_combinations_dualmode
);
2557 hw
->wiphy
->max_remain_on_channel_duration
= 1000;
2559 hw
->wiphy
->flags
|= WIPHY_FLAG_CUSTOM_REGULATORY
|
2560 WIPHY_FLAG_DISABLE_BEACON_HINTS
|
2561 WIPHY_FLAG_IBSS_RSN
;
2563 if (iwlagn_mod_params
.power_save
)
2564 hw
->wiphy
->flags
|= WIPHY_FLAG_PS_ON_BY_DEFAULT
;
2566 hw
->wiphy
->flags
&= ~WIPHY_FLAG_PS_ON_BY_DEFAULT
;
2568 hw
->wiphy
->max_scan_ssids
= PROBE_OPTION_MAX
;
2569 /* we create the 802.11 header and a zero-length SSID element */
2570 hw
->wiphy
->max_scan_ie_len
= capa
->max_probe_length
- 24 - 2;
2572 /* Default value; 4 EDCA QOS priorities */
2575 hw
->max_listen_interval
= IWL_CONN_MAX_LISTEN_INTERVAL
;
2577 if (priv
->bands
[IEEE80211_BAND_2GHZ
].n_channels
)
2578 priv
->hw
->wiphy
->bands
[IEEE80211_BAND_2GHZ
] =
2579 &priv
->bands
[IEEE80211_BAND_2GHZ
];
2580 if (priv
->bands
[IEEE80211_BAND_5GHZ
].n_channels
)
2581 priv
->hw
->wiphy
->bands
[IEEE80211_BAND_5GHZ
] =
2582 &priv
->bands
[IEEE80211_BAND_5GHZ
];
2584 iwl_leds_init(priv
);
2586 ret
= ieee80211_register_hw(priv
->hw
);
2588 IWL_ERR(priv
, "Failed to register hw (error %d)\n", ret
);
2591 priv
->mac80211_registered
= 1;
2597 static int iwlagn_mac_start(struct ieee80211_hw
*hw
)
2599 struct iwl_priv
*priv
= hw
->priv
;
2602 IWL_DEBUG_MAC80211(priv
, "enter\n");
2604 /* we should be verifying the device is ready to be opened */
2605 mutex_lock(&priv
->mutex
);
2606 ret
= __iwl_up(priv
);
2607 mutex_unlock(&priv
->mutex
);
2611 IWL_DEBUG_INFO(priv
, "Start UP work done.\n");
2613 /* Now we should be done, and the READY bit should be set. */
2614 if (WARN_ON(!test_bit(STATUS_READY
, &priv
->status
)))
2617 iwlagn_led_enable(priv
);
2620 IWL_DEBUG_MAC80211(priv
, "leave\n");
2624 static void iwlagn_mac_stop(struct ieee80211_hw
*hw
)
2626 struct iwl_priv
*priv
= hw
->priv
;
2628 IWL_DEBUG_MAC80211(priv
, "enter\n");
2637 flush_workqueue(priv
->workqueue
);
2639 /* User space software may expect getting rfkill changes
2640 * even if interface is down */
2641 iwl_write32(priv
, CSR_INT
, 0xFFFFFFFF);
2642 iwl_enable_rfkill_int(priv
);
2644 IWL_DEBUG_MAC80211(priv
, "leave\n");
2647 static void iwlagn_mac_tx(struct ieee80211_hw
*hw
, struct sk_buff
*skb
)
2649 struct iwl_priv
*priv
= hw
->priv
;
2651 IWL_DEBUG_MACDUMP(priv
, "enter\n");
2653 IWL_DEBUG_TX(priv
, "dev->xmit(%d bytes) at rate 0x%02x\n", skb
->len
,
2654 ieee80211_get_tx_rate(hw
, IEEE80211_SKB_CB(skb
))->bitrate
);
2656 if (iwlagn_tx_skb(priv
, skb
))
2657 dev_kfree_skb_any(skb
);
2659 IWL_DEBUG_MACDUMP(priv
, "leave\n");
2662 static void iwlagn_mac_update_tkip_key(struct ieee80211_hw
*hw
,
2663 struct ieee80211_vif
*vif
,
2664 struct ieee80211_key_conf
*keyconf
,
2665 struct ieee80211_sta
*sta
,
2666 u32 iv32
, u16
*phase1key
)
2668 struct iwl_priv
*priv
= hw
->priv
;
2669 struct iwl_vif_priv
*vif_priv
= (void *)vif
->drv_priv
;
2671 IWL_DEBUG_MAC80211(priv
, "enter\n");
2673 iwl_update_tkip_key(priv
, vif_priv
->ctx
, keyconf
, sta
,
2676 IWL_DEBUG_MAC80211(priv
, "leave\n");
2679 static int iwlagn_mac_set_key(struct ieee80211_hw
*hw
, enum set_key_cmd cmd
,
2680 struct ieee80211_vif
*vif
,
2681 struct ieee80211_sta
*sta
,
2682 struct ieee80211_key_conf
*key
)
2684 struct iwl_priv
*priv
= hw
->priv
;
2685 struct iwl_vif_priv
*vif_priv
= (void *)vif
->drv_priv
;
2686 struct iwl_rxon_context
*ctx
= vif_priv
->ctx
;
2689 bool is_default_wep_key
= false;
2691 IWL_DEBUG_MAC80211(priv
, "enter\n");
2693 if (iwlagn_mod_params
.sw_crypto
) {
2694 IWL_DEBUG_MAC80211(priv
, "leave - hwcrypto disabled\n");
2699 * To support IBSS RSN, don't program group keys in IBSS, the
2700 * hardware will then not attempt to decrypt the frames.
2702 if (vif
->type
== NL80211_IFTYPE_ADHOC
&&
2703 !(key
->flags
& IEEE80211_KEY_FLAG_PAIRWISE
))
2706 sta_id
= iwl_sta_id_or_broadcast(priv
, vif_priv
->ctx
, sta
);
2707 if (sta_id
== IWL_INVALID_STATION
)
2710 mutex_lock(&priv
->mutex
);
2711 iwl_scan_cancel_timeout(priv
, 100);
2714 * If we are getting WEP group key and we didn't receive any key mapping
2715 * so far, we are in legacy wep mode (group key only), otherwise we are
2717 * In legacy wep mode, we use another host command to the uCode.
2719 if ((key
->cipher
== WLAN_CIPHER_SUITE_WEP40
||
2720 key
->cipher
== WLAN_CIPHER_SUITE_WEP104
) &&
2723 is_default_wep_key
= !ctx
->key_mapping_keys
;
2725 is_default_wep_key
=
2726 (key
->hw_key_idx
== HW_KEY_DEFAULT
);
2731 if (is_default_wep_key
)
2732 ret
= iwl_set_default_wep_key(priv
, vif_priv
->ctx
, key
);
2734 ret
= iwl_set_dynamic_key(priv
, vif_priv
->ctx
,
2737 IWL_DEBUG_MAC80211(priv
, "enable hwcrypto key\n");
2740 if (is_default_wep_key
)
2741 ret
= iwl_remove_default_wep_key(priv
, ctx
, key
);
2743 ret
= iwl_remove_dynamic_key(priv
, ctx
, key
, sta_id
);
2745 IWL_DEBUG_MAC80211(priv
, "disable hwcrypto key\n");
2751 mutex_unlock(&priv
->mutex
);
2752 IWL_DEBUG_MAC80211(priv
, "leave\n");
2757 static int iwlagn_mac_ampdu_action(struct ieee80211_hw
*hw
,
2758 struct ieee80211_vif
*vif
,
2759 enum ieee80211_ampdu_mlme_action action
,
2760 struct ieee80211_sta
*sta
, u16 tid
, u16
*ssn
,
2763 struct iwl_priv
*priv
= hw
->priv
;
2765 struct iwl_station_priv
*sta_priv
= (void *) sta
->drv_priv
;
2767 IWL_DEBUG_HT(priv
, "A-MPDU action on addr %pM tid %d\n",
2770 if (!(priv
->cfg
->sku
& EEPROM_SKU_CAP_11N_ENABLE
))
2773 mutex_lock(&priv
->mutex
);
2776 case IEEE80211_AMPDU_RX_START
:
2777 IWL_DEBUG_HT(priv
, "start Rx\n");
2778 ret
= iwl_sta_rx_agg_start(priv
, sta
, tid
, *ssn
);
2780 case IEEE80211_AMPDU_RX_STOP
:
2781 IWL_DEBUG_HT(priv
, "stop Rx\n");
2782 ret
= iwl_sta_rx_agg_stop(priv
, sta
, tid
);
2783 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
2786 case IEEE80211_AMPDU_TX_START
:
2787 IWL_DEBUG_HT(priv
, "start Tx\n");
2788 ret
= iwlagn_tx_agg_start(priv
, vif
, sta
, tid
, ssn
);
2790 priv
->_agn
.agg_tids_count
++;
2791 IWL_DEBUG_HT(priv
, "priv->_agn.agg_tids_count = %u\n",
2792 priv
->_agn
.agg_tids_count
);
2795 case IEEE80211_AMPDU_TX_STOP
:
2796 IWL_DEBUG_HT(priv
, "stop Tx\n");
2797 ret
= iwlagn_tx_agg_stop(priv
, vif
, sta
, tid
);
2798 if ((ret
== 0) && (priv
->_agn
.agg_tids_count
> 0)) {
2799 priv
->_agn
.agg_tids_count
--;
2800 IWL_DEBUG_HT(priv
, "priv->_agn.agg_tids_count = %u\n",
2801 priv
->_agn
.agg_tids_count
);
2803 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
2805 if (priv
->cfg
->ht_params
&&
2806 priv
->cfg
->ht_params
->use_rts_for_aggregation
) {
2808 * switch off RTS/CTS if it was previously enabled
2810 sta_priv
->lq_sta
.lq
.general_params
.flags
&=
2811 ~LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK
;
2812 iwl_send_lq_cmd(priv
, iwl_rxon_ctx_from_vif(vif
),
2813 &sta_priv
->lq_sta
.lq
, CMD_ASYNC
, false);
2816 case IEEE80211_AMPDU_TX_OPERATIONAL
:
2817 buf_size
= min_t(int, buf_size
, LINK_QUAL_AGG_FRAME_LIMIT_DEF
);
2819 iwlagn_txq_agg_queue_setup(priv
, sta
, tid
, buf_size
);
2822 * If the limit is 0, then it wasn't initialised yet,
2823 * use the default. We can do that since we take the
2824 * minimum below, and we don't want to go above our
2825 * default due to hardware restrictions.
2827 if (sta_priv
->max_agg_bufsize
== 0)
2828 sta_priv
->max_agg_bufsize
=
2829 LINK_QUAL_AGG_FRAME_LIMIT_DEF
;
2832 * Even though in theory the peer could have different
2833 * aggregation reorder buffer sizes for different sessions,
2834 * our ucode doesn't allow for that and has a global limit
2835 * for each station. Therefore, use the minimum of all the
2836 * aggregation sessions and our default value.
2838 sta_priv
->max_agg_bufsize
=
2839 min(sta_priv
->max_agg_bufsize
, buf_size
);
2841 if (priv
->cfg
->ht_params
&&
2842 priv
->cfg
->ht_params
->use_rts_for_aggregation
) {
2844 * switch to RTS/CTS if it is the prefer protection
2845 * method for HT traffic
2848 sta_priv
->lq_sta
.lq
.general_params
.flags
|=
2849 LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK
;
2852 sta_priv
->lq_sta
.lq
.agg_params
.agg_frame_cnt_limit
=
2853 sta_priv
->max_agg_bufsize
;
2855 iwl_send_lq_cmd(priv
, iwl_rxon_ctx_from_vif(vif
),
2856 &sta_priv
->lq_sta
.lq
, CMD_ASYNC
, false);
2858 IWL_INFO(priv
, "Tx aggregation enabled on ra = %pM tid = %d\n",
2863 mutex_unlock(&priv
->mutex
);
2868 static int iwlagn_mac_sta_add(struct ieee80211_hw
*hw
,
2869 struct ieee80211_vif
*vif
,
2870 struct ieee80211_sta
*sta
)
2872 struct iwl_priv
*priv
= hw
->priv
;
2873 struct iwl_station_priv
*sta_priv
= (void *)sta
->drv_priv
;
2874 struct iwl_vif_priv
*vif_priv
= (void *)vif
->drv_priv
;
2875 bool is_ap
= vif
->type
== NL80211_IFTYPE_STATION
;
2879 IWL_DEBUG_INFO(priv
, "received request to add station %pM\n",
2881 mutex_lock(&priv
->mutex
);
2882 IWL_DEBUG_INFO(priv
, "proceeding to add station %pM\n",
2884 sta_priv
->common
.sta_id
= IWL_INVALID_STATION
;
2886 atomic_set(&sta_priv
->pending_frames
, 0);
2887 if (vif
->type
== NL80211_IFTYPE_AP
)
2888 sta_priv
->client
= true;
2890 ret
= iwl_add_station_common(priv
, vif_priv
->ctx
, sta
->addr
,
2891 is_ap
, sta
, &sta_id
);
2893 IWL_ERR(priv
, "Unable to add station %pM (%d)\n",
2895 /* Should we return success if return code is EEXIST ? */
2896 mutex_unlock(&priv
->mutex
);
2900 sta_priv
->common
.sta_id
= sta_id
;
2902 /* Initialize rate scaling */
2903 IWL_DEBUG_INFO(priv
, "Initializing rate scaling for station %pM\n",
2905 iwl_rs_rate_init(priv
, sta
, sta_id
);
2906 mutex_unlock(&priv
->mutex
);
2911 static void iwlagn_mac_channel_switch(struct ieee80211_hw
*hw
,
2912 struct ieee80211_channel_switch
*ch_switch
)
2914 struct iwl_priv
*priv
= hw
->priv
;
2915 const struct iwl_channel_info
*ch_info
;
2916 struct ieee80211_conf
*conf
= &hw
->conf
;
2917 struct ieee80211_channel
*channel
= ch_switch
->channel
;
2918 struct iwl_ht_config
*ht_conf
= &priv
->current_ht_config
;
2921 * When we add support for multiple interfaces, we need to
2922 * revisit this. The channel switch command in the device
2923 * only affects the BSS context, but what does that really
2924 * mean? And what if we get a CSA on the second interface?
2925 * This needs a lot of work.
2927 struct iwl_rxon_context
*ctx
= &priv
->contexts
[IWL_RXON_CTX_BSS
];
2930 IWL_DEBUG_MAC80211(priv
, "enter\n");
2932 mutex_lock(&priv
->mutex
);
2934 if (iwl_is_rfkill(priv
))
2937 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
) ||
2938 test_bit(STATUS_SCANNING
, &priv
->status
) ||
2939 test_bit(STATUS_CHANNEL_SWITCH_PENDING
, &priv
->status
))
2942 if (!iwl_is_associated_ctx(ctx
))
2945 if (!priv
->cfg
->ops
->lib
->set_channel_switch
)
2948 ch
= channel
->hw_value
;
2949 if (le16_to_cpu(ctx
->active
.channel
) == ch
)
2952 ch_info
= iwl_get_channel_info(priv
, channel
->band
, ch
);
2953 if (!is_channel_valid(ch_info
)) {
2954 IWL_DEBUG_MAC80211(priv
, "invalid channel\n");
2958 spin_lock_irq(&priv
->lock
);
2960 priv
->current_ht_config
.smps
= conf
->smps_mode
;
2962 /* Configure HT40 channels */
2963 ctx
->ht
.enabled
= conf_is_ht(conf
);
2964 if (ctx
->ht
.enabled
) {
2965 if (conf_is_ht40_minus(conf
)) {
2966 ctx
->ht
.extension_chan_offset
=
2967 IEEE80211_HT_PARAM_CHA_SEC_BELOW
;
2968 ctx
->ht
.is_40mhz
= true;
2969 } else if (conf_is_ht40_plus(conf
)) {
2970 ctx
->ht
.extension_chan_offset
=
2971 IEEE80211_HT_PARAM_CHA_SEC_ABOVE
;
2972 ctx
->ht
.is_40mhz
= true;
2974 ctx
->ht
.extension_chan_offset
=
2975 IEEE80211_HT_PARAM_CHA_SEC_NONE
;
2976 ctx
->ht
.is_40mhz
= false;
2979 ctx
->ht
.is_40mhz
= false;
2981 if ((le16_to_cpu(ctx
->staging
.channel
) != ch
))
2982 ctx
->staging
.flags
= 0;
2984 iwl_set_rxon_channel(priv
, channel
, ctx
);
2985 iwl_set_rxon_ht(priv
, ht_conf
);
2986 iwl_set_flags_for_band(priv
, ctx
, channel
->band
, ctx
->vif
);
2988 spin_unlock_irq(&priv
->lock
);
2992 * at this point, staging_rxon has the
2993 * configuration for channel switch
2995 set_bit(STATUS_CHANNEL_SWITCH_PENDING
, &priv
->status
);
2996 priv
->switch_channel
= cpu_to_le16(ch
);
2997 if (priv
->cfg
->ops
->lib
->set_channel_switch(priv
, ch_switch
)) {
2998 clear_bit(STATUS_CHANNEL_SWITCH_PENDING
, &priv
->status
);
2999 priv
->switch_channel
= 0;
3000 ieee80211_chswitch_done(ctx
->vif
, false);
3004 mutex_unlock(&priv
->mutex
);
3005 IWL_DEBUG_MAC80211(priv
, "leave\n");
3008 static void iwlagn_configure_filter(struct ieee80211_hw
*hw
,
3009 unsigned int changed_flags
,
3010 unsigned int *total_flags
,
3013 struct iwl_priv
*priv
= hw
->priv
;
3014 __le32 filter_or
= 0, filter_nand
= 0;
3015 struct iwl_rxon_context
*ctx
;
3017 #define CHK(test, flag) do { \
3018 if (*total_flags & (test)) \
3019 filter_or |= (flag); \
3021 filter_nand |= (flag); \
3024 IWL_DEBUG_MAC80211(priv
, "Enter: changed: 0x%x, total: 0x%x\n",
3025 changed_flags
, *total_flags
);
3027 CHK(FIF_OTHER_BSS
| FIF_PROMISC_IN_BSS
, RXON_FILTER_PROMISC_MSK
);
3028 /* Setting _just_ RXON_FILTER_CTL2HOST_MSK causes FH errors */
3029 CHK(FIF_CONTROL
, RXON_FILTER_CTL2HOST_MSK
| RXON_FILTER_PROMISC_MSK
);
3030 CHK(FIF_BCN_PRBRESP_PROMISC
, RXON_FILTER_BCON_AWARE_MSK
);
3034 mutex_lock(&priv
->mutex
);
3036 for_each_context(priv
, ctx
) {
3037 ctx
->staging
.filter_flags
&= ~filter_nand
;
3038 ctx
->staging
.filter_flags
|= filter_or
;
3041 * Not committing directly because hardware can perform a scan,
3042 * but we'll eventually commit the filter flags change anyway.
3046 mutex_unlock(&priv
->mutex
);
3049 * Receiving all multicast frames is always enabled by the
3050 * default flags setup in iwl_connection_init_rx_config()
3051 * since we currently do not support programming multicast
3052 * filters into the device.
3054 *total_flags
&= FIF_OTHER_BSS
| FIF_ALLMULTI
| FIF_PROMISC_IN_BSS
|
3055 FIF_BCN_PRBRESP_PROMISC
| FIF_CONTROL
;
3058 static void iwlagn_mac_flush(struct ieee80211_hw
*hw
, bool drop
)
3060 struct iwl_priv
*priv
= hw
->priv
;
3062 mutex_lock(&priv
->mutex
);
3063 IWL_DEBUG_MAC80211(priv
, "enter\n");
3065 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
)) {
3066 IWL_DEBUG_TX(priv
, "Aborting flush due to device shutdown\n");
3069 if (iwl_is_rfkill(priv
)) {
3070 IWL_DEBUG_TX(priv
, "Aborting flush due to RF Kill\n");
3075 * mac80211 will not push any more frames for transmit
3076 * until the flush is completed
3079 IWL_DEBUG_MAC80211(priv
, "send flush command\n");
3080 if (iwlagn_txfifo_flush(priv
, IWL_DROP_ALL
)) {
3081 IWL_ERR(priv
, "flush request fail\n");
3085 IWL_DEBUG_MAC80211(priv
, "wait transmit/flush all frames\n");
3086 iwlagn_wait_tx_queue_empty(priv
);
3088 mutex_unlock(&priv
->mutex
);
3089 IWL_DEBUG_MAC80211(priv
, "leave\n");
3092 static void iwlagn_disable_roc(struct iwl_priv
*priv
)
3094 struct iwl_rxon_context
*ctx
= &priv
->contexts
[IWL_RXON_CTX_PAN
];
3095 struct ieee80211_channel
*chan
= ACCESS_ONCE(priv
->hw
->conf
.channel
);
3097 lockdep_assert_held(&priv
->mutex
);
3099 if (!ctx
->is_active
)
3102 ctx
->staging
.dev_type
= RXON_DEV_TYPE_2STA
;
3103 ctx
->staging
.filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
3104 iwl_set_rxon_channel(priv
, chan
, ctx
);
3105 iwl_set_flags_for_band(priv
, ctx
, chan
->band
, NULL
);
3107 priv
->_agn
.hw_roc_channel
= NULL
;
3109 iwlagn_commit_rxon(priv
, ctx
);
3111 ctx
->is_active
= false;
3114 static void iwlagn_bg_roc_done(struct work_struct
*work
)
3116 struct iwl_priv
*priv
= container_of(work
, struct iwl_priv
,
3117 _agn
.hw_roc_work
.work
);
3119 mutex_lock(&priv
->mutex
);
3120 ieee80211_remain_on_channel_expired(priv
->hw
);
3121 iwlagn_disable_roc(priv
);
3122 mutex_unlock(&priv
->mutex
);
3125 static int iwl_mac_remain_on_channel(struct ieee80211_hw
*hw
,
3126 struct ieee80211_channel
*channel
,
3127 enum nl80211_channel_type channel_type
,
3130 struct iwl_priv
*priv
= hw
->priv
;
3133 if (!(priv
->valid_contexts
& BIT(IWL_RXON_CTX_PAN
)))
3136 if (!(priv
->contexts
[IWL_RXON_CTX_PAN
].interface_modes
&
3137 BIT(NL80211_IFTYPE_P2P_CLIENT
)))
3140 mutex_lock(&priv
->mutex
);
3142 if (priv
->contexts
[IWL_RXON_CTX_PAN
].is_active
||
3143 test_bit(STATUS_SCAN_HW
, &priv
->status
)) {
3148 priv
->contexts
[IWL_RXON_CTX_PAN
].is_active
= true;
3149 priv
->_agn
.hw_roc_channel
= channel
;
3150 priv
->_agn
.hw_roc_chantype
= channel_type
;
3151 priv
->_agn
.hw_roc_duration
= DIV_ROUND_UP(duration
* 1000, 1024);
3152 iwlagn_commit_rxon(priv
, &priv
->contexts
[IWL_RXON_CTX_PAN
]);
3153 queue_delayed_work(priv
->workqueue
, &priv
->_agn
.hw_roc_work
,
3154 msecs_to_jiffies(duration
+ 20));
3156 msleep(IWL_MIN_SLOT_TIME
); /* TU is almost ms */
3157 ieee80211_ready_on_channel(priv
->hw
);
3160 mutex_unlock(&priv
->mutex
);
3165 static int iwl_mac_cancel_remain_on_channel(struct ieee80211_hw
*hw
)
3167 struct iwl_priv
*priv
= hw
->priv
;
3169 if (!(priv
->valid_contexts
& BIT(IWL_RXON_CTX_PAN
)))
3172 cancel_delayed_work_sync(&priv
->_agn
.hw_roc_work
);
3174 mutex_lock(&priv
->mutex
);
3175 iwlagn_disable_roc(priv
);
3176 mutex_unlock(&priv
->mutex
);
3181 /*****************************************************************************
3183 * driver setup and teardown
3185 *****************************************************************************/
3187 static void iwl_setup_deferred_work(struct iwl_priv
*priv
)
3189 priv
->workqueue
= create_singlethread_workqueue(DRV_NAME
);
3191 init_waitqueue_head(&priv
->wait_command_queue
);
3193 INIT_WORK(&priv
->restart
, iwl_bg_restart
);
3194 INIT_WORK(&priv
->rx_replenish
, iwl_bg_rx_replenish
);
3195 INIT_WORK(&priv
->beacon_update
, iwl_bg_beacon_update
);
3196 INIT_WORK(&priv
->run_time_calib_work
, iwl_bg_run_time_calib_work
);
3197 INIT_WORK(&priv
->tx_flush
, iwl_bg_tx_flush
);
3198 INIT_WORK(&priv
->bt_full_concurrency
, iwl_bg_bt_full_concurrency
);
3199 INIT_WORK(&priv
->bt_runtime_config
, iwl_bg_bt_runtime_config
);
3200 INIT_DELAYED_WORK(&priv
->_agn
.hw_roc_work
, iwlagn_bg_roc_done
);
3202 iwl_setup_scan_deferred_work(priv
);
3204 if (priv
->cfg
->ops
->lib
->setup_deferred_work
)
3205 priv
->cfg
->ops
->lib
->setup_deferred_work(priv
);
3207 init_timer(&priv
->statistics_periodic
);
3208 priv
->statistics_periodic
.data
= (unsigned long)priv
;
3209 priv
->statistics_periodic
.function
= iwl_bg_statistics_periodic
;
3211 init_timer(&priv
->ucode_trace
);
3212 priv
->ucode_trace
.data
= (unsigned long)priv
;
3213 priv
->ucode_trace
.function
= iwl_bg_ucode_trace
;
3215 init_timer(&priv
->watchdog
);
3216 priv
->watchdog
.data
= (unsigned long)priv
;
3217 priv
->watchdog
.function
= iwl_bg_watchdog
;
3219 tasklet_init(&priv
->irq_tasklet
, (void (*)(unsigned long))
3220 iwl_irq_tasklet
, (unsigned long)priv
);
3223 static void iwl_cancel_deferred_work(struct iwl_priv
*priv
)
3225 if (priv
->cfg
->ops
->lib
->cancel_deferred_work
)
3226 priv
->cfg
->ops
->lib
->cancel_deferred_work(priv
);
3228 cancel_work_sync(&priv
->run_time_calib_work
);
3229 cancel_work_sync(&priv
->beacon_update
);
3231 iwl_cancel_scan_deferred_work(priv
);
3233 cancel_work_sync(&priv
->bt_full_concurrency
);
3234 cancel_work_sync(&priv
->bt_runtime_config
);
3236 del_timer_sync(&priv
->statistics_periodic
);
3237 del_timer_sync(&priv
->ucode_trace
);
3240 static void iwl_init_hw_rates(struct iwl_priv
*priv
,
3241 struct ieee80211_rate
*rates
)
3245 for (i
= 0; i
< IWL_RATE_COUNT_LEGACY
; i
++) {
3246 rates
[i
].bitrate
= iwl_rates
[i
].ieee
* 5;
3247 rates
[i
].hw_value
= i
; /* Rate scaling will work on indexes */
3248 rates
[i
].hw_value_short
= i
;
3250 if ((i
>= IWL_FIRST_CCK_RATE
) && (i
<= IWL_LAST_CCK_RATE
)) {
3252 * If CCK != 1M then set short preamble rate flag.
3255 (iwl_rates
[i
].plcp
== IWL_RATE_1M_PLCP
) ?
3256 0 : IEEE80211_RATE_SHORT_PREAMBLE
;
3261 static int iwl_init_drv(struct iwl_priv
*priv
)
3265 spin_lock_init(&priv
->sta_lock
);
3266 spin_lock_init(&priv
->hcmd_lock
);
3268 mutex_init(&priv
->mutex
);
3270 priv
->ieee_channels
= NULL
;
3271 priv
->ieee_rates
= NULL
;
3272 priv
->band
= IEEE80211_BAND_2GHZ
;
3274 priv
->iw_mode
= NL80211_IFTYPE_STATION
;
3275 priv
->current_ht_config
.smps
= IEEE80211_SMPS_STATIC
;
3276 priv
->missed_beacon_threshold
= IWL_MISSED_BEACON_THRESHOLD_DEF
;
3277 priv
->_agn
.agg_tids_count
= 0;
3279 /* initialize force reset */
3280 priv
->force_reset
[IWL_RF_RESET
].reset_duration
=
3281 IWL_DELAY_NEXT_FORCE_RF_RESET
;
3282 priv
->force_reset
[IWL_FW_RESET
].reset_duration
=
3283 IWL_DELAY_NEXT_FORCE_FW_RELOAD
;
3285 priv
->rx_statistics_jiffies
= jiffies
;
3287 /* Choose which receivers/antennas to use */
3288 iwlagn_set_rxon_chain(priv
, &priv
->contexts
[IWL_RXON_CTX_BSS
]);
3290 iwl_init_scan_params(priv
);
3293 if (priv
->cfg
->bt_params
&&
3294 priv
->cfg
->bt_params
->advanced_bt_coexist
) {
3295 priv
->kill_ack_mask
= IWLAGN_BT_KILL_ACK_MASK_DEFAULT
;
3296 priv
->kill_cts_mask
= IWLAGN_BT_KILL_CTS_MASK_DEFAULT
;
3297 priv
->bt_valid
= IWLAGN_BT_ALL_VALID_MSK
;
3298 priv
->bt_on_thresh
= BT_ON_THRESHOLD_DEF
;
3299 priv
->bt_duration
= BT_DURATION_LIMIT_DEF
;
3300 priv
->dynamic_frag_thresh
= BT_FRAG_THRESHOLD_DEF
;
3303 ret
= iwl_init_channel_map(priv
);
3305 IWL_ERR(priv
, "initializing regulatory failed: %d\n", ret
);
3309 ret
= iwlcore_init_geos(priv
);
3311 IWL_ERR(priv
, "initializing geos failed: %d\n", ret
);
3312 goto err_free_channel_map
;
3314 iwl_init_hw_rates(priv
, priv
->ieee_rates
);
3318 err_free_channel_map
:
3319 iwl_free_channel_map(priv
);
3324 static void iwl_uninit_drv(struct iwl_priv
*priv
)
3326 iwl_calib_free_results(priv
);
3327 iwlcore_free_geos(priv
);
3328 iwl_free_channel_map(priv
);
3329 kfree(priv
->scan_cmd
);
3330 kfree(priv
->beacon_cmd
);
3333 struct ieee80211_ops iwlagn_hw_ops
= {
3334 .tx
= iwlagn_mac_tx
,
3335 .start
= iwlagn_mac_start
,
3336 .stop
= iwlagn_mac_stop
,
3337 .add_interface
= iwl_mac_add_interface
,
3338 .remove_interface
= iwl_mac_remove_interface
,
3339 .change_interface
= iwl_mac_change_interface
,
3340 .config
= iwlagn_mac_config
,
3341 .configure_filter
= iwlagn_configure_filter
,
3342 .set_key
= iwlagn_mac_set_key
,
3343 .update_tkip_key
= iwlagn_mac_update_tkip_key
,
3344 .conf_tx
= iwl_mac_conf_tx
,
3345 .bss_info_changed
= iwlagn_bss_info_changed
,
3346 .ampdu_action
= iwlagn_mac_ampdu_action
,
3347 .hw_scan
= iwl_mac_hw_scan
,
3348 .sta_notify
= iwlagn_mac_sta_notify
,
3349 .sta_add
= iwlagn_mac_sta_add
,
3350 .sta_remove
= iwl_mac_sta_remove
,
3351 .channel_switch
= iwlagn_mac_channel_switch
,
3352 .flush
= iwlagn_mac_flush
,
3353 .tx_last_beacon
= iwl_mac_tx_last_beacon
,
3354 .remain_on_channel
= iwl_mac_remain_on_channel
,
3355 .cancel_remain_on_channel
= iwl_mac_cancel_remain_on_channel
,
3356 .offchannel_tx
= iwl_mac_offchannel_tx
,
3357 .offchannel_tx_cancel_wait
= iwl_mac_offchannel_tx_cancel_wait
,
3358 CFG80211_TESTMODE_CMD(iwl_testmode_cmd
)
3359 CFG80211_TESTMODE_DUMP(iwl_testmode_dump
)
3362 static u32
iwl_hw_detect(struct iwl_priv
*priv
)
3364 return iwl_read32(priv
, CSR_HW_REV
);
3367 static int iwl_set_hw_params(struct iwl_priv
*priv
)
3369 priv
->hw_params
.max_rxq_size
= RX_QUEUE_SIZE
;
3370 priv
->hw_params
.max_rxq_log
= RX_QUEUE_SIZE_LOG
;
3371 if (iwlagn_mod_params
.amsdu_size_8K
)
3372 priv
->hw_params
.rx_page_order
= get_order(IWL_RX_BUF_SIZE_8K
);
3374 priv
->hw_params
.rx_page_order
= get_order(IWL_RX_BUF_SIZE_4K
);
3376 priv
->hw_params
.max_beacon_itrvl
= IWL_MAX_UCODE_BEACON_INTERVAL
;
3378 if (iwlagn_mod_params
.disable_11n
)
3379 priv
->cfg
->sku
&= ~EEPROM_SKU_CAP_11N_ENABLE
;
3381 /* Device-specific setup */
3382 return priv
->cfg
->ops
->lib
->set_hw_params(priv
);
3385 static const u8 iwlagn_bss_ac_to_fifo
[] = {
3392 static const u8 iwlagn_bss_ac_to_queue
[] = {
3396 static const u8 iwlagn_pan_ac_to_fifo
[] = {
3397 IWL_TX_FIFO_VO_IPAN
,
3398 IWL_TX_FIFO_VI_IPAN
,
3399 IWL_TX_FIFO_BE_IPAN
,
3400 IWL_TX_FIFO_BK_IPAN
,
3403 static const u8 iwlagn_pan_ac_to_queue
[] = {
3407 /* This function both allocates and initializes hw and priv. */
3408 static struct ieee80211_hw
*iwl_alloc_all(struct iwl_cfg
*cfg
)
3410 struct iwl_priv
*priv
;
3411 /* mac80211 allocates memory for this device instance, including
3412 * space for this driver's private structure */
3413 struct ieee80211_hw
*hw
;
3415 hw
= ieee80211_alloc_hw(sizeof(struct iwl_priv
), &iwlagn_hw_ops
);
3417 pr_err("%s: Can not allocate network device\n",
3429 static void iwl_init_context(struct iwl_priv
*priv
)
3434 * The default context is always valid,
3435 * more may be discovered when firmware
3438 priv
->valid_contexts
= BIT(IWL_RXON_CTX_BSS
);
3440 for (i
= 0; i
< NUM_IWL_RXON_CTX
; i
++)
3441 priv
->contexts
[i
].ctxid
= i
;
3443 priv
->contexts
[IWL_RXON_CTX_BSS
].always_active
= true;
3444 priv
->contexts
[IWL_RXON_CTX_BSS
].is_active
= true;
3445 priv
->contexts
[IWL_RXON_CTX_BSS
].rxon_cmd
= REPLY_RXON
;
3446 priv
->contexts
[IWL_RXON_CTX_BSS
].rxon_timing_cmd
= REPLY_RXON_TIMING
;
3447 priv
->contexts
[IWL_RXON_CTX_BSS
].rxon_assoc_cmd
= REPLY_RXON_ASSOC
;
3448 priv
->contexts
[IWL_RXON_CTX_BSS
].qos_cmd
= REPLY_QOS_PARAM
;
3449 priv
->contexts
[IWL_RXON_CTX_BSS
].ap_sta_id
= IWL_AP_ID
;
3450 priv
->contexts
[IWL_RXON_CTX_BSS
].wep_key_cmd
= REPLY_WEPKEY
;
3451 priv
->contexts
[IWL_RXON_CTX_BSS
].ac_to_fifo
= iwlagn_bss_ac_to_fifo
;
3452 priv
->contexts
[IWL_RXON_CTX_BSS
].ac_to_queue
= iwlagn_bss_ac_to_queue
;
3453 priv
->contexts
[IWL_RXON_CTX_BSS
].exclusive_interface_modes
=
3454 BIT(NL80211_IFTYPE_ADHOC
);
3455 priv
->contexts
[IWL_RXON_CTX_BSS
].interface_modes
=
3456 BIT(NL80211_IFTYPE_STATION
);
3457 priv
->contexts
[IWL_RXON_CTX_BSS
].ap_devtype
= RXON_DEV_TYPE_AP
;
3458 priv
->contexts
[IWL_RXON_CTX_BSS
].ibss_devtype
= RXON_DEV_TYPE_IBSS
;
3459 priv
->contexts
[IWL_RXON_CTX_BSS
].station_devtype
= RXON_DEV_TYPE_ESS
;
3460 priv
->contexts
[IWL_RXON_CTX_BSS
].unused_devtype
= RXON_DEV_TYPE_ESS
;
3462 priv
->contexts
[IWL_RXON_CTX_PAN
].rxon_cmd
= REPLY_WIPAN_RXON
;
3463 priv
->contexts
[IWL_RXON_CTX_PAN
].rxon_timing_cmd
=
3464 REPLY_WIPAN_RXON_TIMING
;
3465 priv
->contexts
[IWL_RXON_CTX_PAN
].rxon_assoc_cmd
=
3466 REPLY_WIPAN_RXON_ASSOC
;
3467 priv
->contexts
[IWL_RXON_CTX_PAN
].qos_cmd
= REPLY_WIPAN_QOS_PARAM
;
3468 priv
->contexts
[IWL_RXON_CTX_PAN
].ap_sta_id
= IWL_AP_ID_PAN
;
3469 priv
->contexts
[IWL_RXON_CTX_PAN
].wep_key_cmd
= REPLY_WIPAN_WEPKEY
;
3470 priv
->contexts
[IWL_RXON_CTX_PAN
].bcast_sta_id
= IWLAGN_PAN_BCAST_ID
;
3471 priv
->contexts
[IWL_RXON_CTX_PAN
].station_flags
= STA_FLG_PAN_STATION
;
3472 priv
->contexts
[IWL_RXON_CTX_PAN
].ac_to_fifo
= iwlagn_pan_ac_to_fifo
;
3473 priv
->contexts
[IWL_RXON_CTX_PAN
].ac_to_queue
= iwlagn_pan_ac_to_queue
;
3474 priv
->contexts
[IWL_RXON_CTX_PAN
].mcast_queue
= IWL_IPAN_MCAST_QUEUE
;
3475 priv
->contexts
[IWL_RXON_CTX_PAN
].interface_modes
=
3476 BIT(NL80211_IFTYPE_STATION
) | BIT(NL80211_IFTYPE_AP
);
3477 #ifdef CONFIG_IWL_P2P
3478 priv
->contexts
[IWL_RXON_CTX_PAN
].interface_modes
|=
3479 BIT(NL80211_IFTYPE_P2P_CLIENT
) | BIT(NL80211_IFTYPE_P2P_GO
);
3481 priv
->contexts
[IWL_RXON_CTX_PAN
].ap_devtype
= RXON_DEV_TYPE_CP
;
3482 priv
->contexts
[IWL_RXON_CTX_PAN
].station_devtype
= RXON_DEV_TYPE_2STA
;
3483 priv
->contexts
[IWL_RXON_CTX_PAN
].unused_devtype
= RXON_DEV_TYPE_P2P
;
3485 BUILD_BUG_ON(NUM_IWL_RXON_CTX
!= 2);
3488 int iwl_probe(void *bus_specific
, struct iwl_bus_ops
*bus_ops
,
3489 struct iwl_cfg
*cfg
)
3492 struct iwl_priv
*priv
;
3493 struct ieee80211_hw
*hw
;
3497 /************************
3498 * 1. Allocating HW data
3499 ************************/
3500 hw
= iwl_alloc_all(cfg
);
3508 priv
->bus
.priv
= priv
;
3509 priv
->bus
.bus_specific
= bus_specific
;
3510 priv
->bus
.ops
= bus_ops
;
3511 priv
->bus
.irq
= priv
->bus
.ops
->get_irq(&priv
->bus
);
3512 priv
->bus
.ops
->set_drv_data(&priv
->bus
, priv
);
3513 priv
->bus
.dev
= priv
->bus
.ops
->get_dev(&priv
->bus
);
3515 iwl_trans_register(&priv
->trans
);
3517 /* At this point both hw and priv are allocated. */
3519 SET_IEEE80211_DEV(hw
, priv
->bus
.dev
);
3521 IWL_DEBUG_INFO(priv
, "*** LOAD DRIVER ***\n");
3523 priv
->inta_mask
= CSR_INI_SET_MASK
;
3525 /* is antenna coupling more than 35dB ? */
3526 priv
->bt_ant_couple_ok
=
3527 (iwlagn_ant_coupling
> IWL_BT_ANTENNA_COUPLING_THRESHOLD
) ?
3530 /* enable/disable bt channel inhibition */
3531 priv
->bt_ch_announce
= iwlagn_bt_ch_announce
;
3532 IWL_DEBUG_INFO(priv
, "BT channel inhibition is %s\n",
3533 (priv
->bt_ch_announce
) ? "On" : "Off");
3535 if (iwl_alloc_traffic_mem(priv
))
3536 IWL_ERR(priv
, "Not enough memory to generate traffic log\n");
3539 /* these spin locks will be used in apm_ops.init and EEPROM access
3540 * we should init now
3542 spin_lock_init(&priv
->reg_lock
);
3543 spin_lock_init(&priv
->lock
);
3546 * stop and reset the on-board processor just in case it is in a
3547 * strange state ... like being left stranded by a primary kernel
3548 * and this is now the kdump kernel trying to start up
3550 iwl_write32(priv
, CSR_RESET
, CSR_RESET_REG_FLAG_NEVO_RESET
);
3552 /***********************
3553 * 3. Read REV register
3554 ***********************/
3555 hw_rev
= iwl_hw_detect(priv
);
3556 IWL_INFO(priv
, "Detected %s, REV=0x%X\n",
3557 priv
->cfg
->name
, hw_rev
);
3559 if (iwl_prepare_card_hw(priv
)) {
3561 IWL_WARN(priv
, "Failed, HW not ready\n");
3562 goto out_free_traffic_mem
;
3568 /* Read the EEPROM */
3569 err
= iwl_eeprom_init(priv
, hw_rev
);
3571 IWL_ERR(priv
, "Unable to init EEPROM\n");
3572 goto out_free_traffic_mem
;
3574 err
= iwl_eeprom_check_version(priv
);
3576 goto out_free_eeprom
;
3578 err
= iwl_eeprom_check_sku(priv
);
3580 goto out_free_eeprom
;
3582 /* extract MAC Address */
3583 iwl_eeprom_get_mac(priv
, priv
->addresses
[0].addr
);
3584 IWL_DEBUG_INFO(priv
, "MAC address: %pM\n", priv
->addresses
[0].addr
);
3585 priv
->hw
->wiphy
->addresses
= priv
->addresses
;
3586 priv
->hw
->wiphy
->n_addresses
= 1;
3587 num_mac
= iwl_eeprom_query16(priv
, EEPROM_NUM_MAC_ADDRESS
);
3589 memcpy(priv
->addresses
[1].addr
, priv
->addresses
[0].addr
,
3591 priv
->addresses
[1].addr
[5]++;
3592 priv
->hw
->wiphy
->n_addresses
++;
3595 /* initialize all valid contexts */
3596 iwl_init_context(priv
);
3598 /************************
3599 * 5. Setup HW constants
3600 ************************/
3601 if (iwl_set_hw_params(priv
)) {
3603 IWL_ERR(priv
, "failed to set hw parameters\n");
3604 goto out_free_eeprom
;
3607 /*******************
3609 *******************/
3611 err
= iwl_init_drv(priv
);
3613 goto out_free_eeprom
;
3614 /* At this point both hw and priv are initialized. */
3616 /********************
3618 ********************/
3619 iwl_alloc_isr_ict(priv
);
3621 err
= request_irq(priv
->bus
.irq
, iwl_isr_ict
, IRQF_SHARED
,
3624 IWL_ERR(priv
, "Error allocating IRQ %d\n", priv
->bus
.irq
);
3625 goto out_uninit_drv
;
3628 iwl_setup_deferred_work(priv
);
3629 iwl_setup_rx_handlers(priv
);
3630 iwl_testmode_init(priv
);
3632 /*********************************************
3633 * 8. Enable interrupts
3634 *********************************************/
3636 iwl_enable_rfkill_int(priv
);
3638 /* If platform's RF_KILL switch is NOT set to KILL */
3639 if (iwl_read32(priv
, CSR_GP_CNTRL
) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW
)
3640 clear_bit(STATUS_RF_KILL_HW
, &priv
->status
);
3642 set_bit(STATUS_RF_KILL_HW
, &priv
->status
);
3644 wiphy_rfkill_set_hw_state(priv
->hw
->wiphy
,
3645 test_bit(STATUS_RF_KILL_HW
, &priv
->status
));
3647 iwl_power_initialize(priv
);
3648 iwl_tt_initialize(priv
);
3650 init_completion(&priv
->_agn
.firmware_loading_complete
);
3652 err
= iwl_request_firmware(priv
, true);
3654 goto out_destroy_workqueue
;
3658 out_destroy_workqueue
:
3659 destroy_workqueue(priv
->workqueue
);
3660 priv
->workqueue
= NULL
;
3661 free_irq(priv
->bus
.irq
, priv
);
3662 iwl_free_isr_ict(priv
);
3664 iwl_uninit_drv(priv
);
3666 iwl_eeprom_free(priv
);
3667 out_free_traffic_mem
:
3668 iwl_free_traffic_mem(priv
);
3669 ieee80211_free_hw(priv
->hw
);
3674 void __devexit
iwl_remove(struct iwl_priv
* priv
)
3676 unsigned long flags
;
3678 wait_for_completion(&priv
->_agn
.firmware_loading_complete
);
3680 IWL_DEBUG_INFO(priv
, "*** UNLOAD DRIVER ***\n");
3682 iwl_dbgfs_unregister(priv
);
3683 sysfs_remove_group(&priv
->bus
.dev
->kobj
,
3684 &iwl_attribute_group
);
3686 /* ieee80211_unregister_hw call wil cause iwl_mac_stop to
3687 * to be called and iwl_down since we are removing the device
3688 * we need to set STATUS_EXIT_PENDING bit.
3690 set_bit(STATUS_EXIT_PENDING
, &priv
->status
);
3692 iwl_testmode_cleanup(priv
);
3693 iwl_leds_exit(priv
);
3695 if (priv
->mac80211_registered
) {
3696 ieee80211_unregister_hw(priv
->hw
);
3697 priv
->mac80211_registered
= 0;
3700 /* Reset to low power before unloading driver. */
3705 /* make sure we flush any pending irq or
3706 * tasklet for the driver
3708 spin_lock_irqsave(&priv
->lock
, flags
);
3709 iwl_disable_interrupts(priv
);
3710 spin_unlock_irqrestore(&priv
->lock
, flags
);
3712 iwl_synchronize_irq(priv
);
3714 iwl_dealloc_ucode(priv
);
3716 trans_rx_free(priv
);
3717 trans_tx_free(priv
);
3719 iwl_eeprom_free(priv
);
3722 /*netif_stop_queue(dev); */
3723 flush_workqueue(priv
->workqueue
);
3725 /* ieee80211_unregister_hw calls iwl_mac_stop, which flushes
3726 * priv->workqueue... so we can't take down the workqueue
3728 destroy_workqueue(priv
->workqueue
);
3729 priv
->workqueue
= NULL
;
3730 iwl_free_traffic_mem(priv
);
3732 free_irq(priv
->bus
.irq
, priv
);
3733 priv
->bus
.ops
->set_drv_data(&priv
->bus
, NULL
);
3735 iwl_uninit_drv(priv
);
3737 iwl_free_isr_ict(priv
);
3739 dev_kfree_skb(priv
->beacon_skb
);
3741 ieee80211_free_hw(priv
->hw
);
3745 /*****************************************************************************
3747 * driver and module entry point
3749 *****************************************************************************/
3750 static int __init
iwl_init(void)
3754 pr_info(DRV_DESCRIPTION
", " DRV_VERSION
"\n");
3755 pr_info(DRV_COPYRIGHT
"\n");
3757 ret
= iwlagn_rate_control_register();
3759 pr_err("Unable to register rate control algorithm: %d\n", ret
);
3763 ret
= iwl_pci_register_driver();
3766 goto error_register
;
3770 iwlagn_rate_control_unregister();
3774 static void __exit
iwl_exit(void)
3776 iwl_pci_unregister_driver();
3777 iwlagn_rate_control_unregister();
3780 module_exit(iwl_exit
);
3781 module_init(iwl_init
);
3783 #ifdef CONFIG_IWLWIFI_DEBUG
3784 module_param_named(debug
, iwl_debug_level
, uint
, S_IRUGO
| S_IWUSR
);
3785 MODULE_PARM_DESC(debug
, "debug output mask");
3788 module_param_named(swcrypto
, iwlagn_mod_params
.sw_crypto
, int, S_IRUGO
);
3789 MODULE_PARM_DESC(swcrypto
, "using crypto in software (default 0 [hardware])");
3790 module_param_named(queues_num
, iwlagn_mod_params
.num_of_queues
, int, S_IRUGO
);
3791 MODULE_PARM_DESC(queues_num
, "number of hw queues.");
3792 module_param_named(11n_disable
, iwlagn_mod_params
.disable_11n
, int, S_IRUGO
);
3793 MODULE_PARM_DESC(11n_disable
, "disable 11n functionality");
3794 module_param_named(amsdu_size_8K
, iwlagn_mod_params
.amsdu_size_8K
,
3796 MODULE_PARM_DESC(amsdu_size_8K
, "enable 8K amsdu size");
3797 module_param_named(fw_restart
, iwlagn_mod_params
.restart_fw
, int, S_IRUGO
);
3798 MODULE_PARM_DESC(fw_restart
, "restart firmware in case of error");
3800 module_param_named(ucode_alternative
, iwlagn_wanted_ucode_alternative
, int,
3802 MODULE_PARM_DESC(ucode_alternative
,
3803 "specify ucode alternative to use from ucode file");
3805 module_param_named(antenna_coupling
, iwlagn_ant_coupling
, int, S_IRUGO
);
3806 MODULE_PARM_DESC(antenna_coupling
,
3807 "specify antenna coupling in dB (defualt: 0 dB)");
3809 module_param_named(bt_ch_inhibition
, iwlagn_bt_ch_announce
, bool, S_IRUGO
);
3810 MODULE_PARM_DESC(bt_ch_inhibition
,
3811 "Disable BT channel inhibition (default: enable)");
3813 module_param_named(plcp_check
, iwlagn_mod_params
.plcp_check
, bool, S_IRUGO
);
3814 MODULE_PARM_DESC(plcp_check
, "Check plcp health (default: 1 [enabled])");
3816 module_param_named(ack_check
, iwlagn_mod_params
.ack_check
, bool, S_IRUGO
);
3817 MODULE_PARM_DESC(ack_check
, "Check ack health (default: 0 [disabled])");
3819 module_param_named(wd_disable
, iwlagn_mod_params
.wd_disable
, bool, S_IRUGO
);
3820 MODULE_PARM_DESC(wd_disable
,
3821 "Disable stuck queue watchdog timer (default: 0 [enabled])");
3824 * set bt_coex_active to true, uCode will do kill/defer
3825 * every time the priority line is asserted (BT is sending signals on the
3826 * priority line in the PCIx).
3827 * set bt_coex_active to false, uCode will ignore the BT activity and
3828 * perform the normal operation
3830 * User might experience transmit issue on some platform due to WiFi/BT
3831 * co-exist problem. The possible behaviors are:
3832 * Able to scan and finding all the available AP
3833 * Not able to associate with any AP
3834 * On those platforms, WiFi communication can be restored by set
3835 * "bt_coex_active" module parameter to "false"
3837 * default: bt_coex_active = true (BT_COEX_ENABLE)
3839 module_param_named(bt_coex_active
, iwlagn_mod_params
.bt_coex_active
,
3841 MODULE_PARM_DESC(bt_coex_active
, "enable wifi/bt co-exist (default: enable)");
3843 module_param_named(led_mode
, iwlagn_mod_params
.led_mode
, int, S_IRUGO
);
3844 MODULE_PARM_DESC(led_mode
, "0=system default, "
3845 "1=On(RF On)/Off(RF Off), 2=blinking (default: 0)");
3847 module_param_named(power_save
, iwlagn_mod_params
.power_save
,
3849 MODULE_PARM_DESC(power_save
,
3850 "enable WiFi power management (default: disable)");
3852 module_param_named(power_level
, iwlagn_mod_params
.power_level
,
3854 MODULE_PARM_DESC(power_level
,
3855 "default power save level (range from 1 - 5, default: 1)");
3858 * For now, keep using power level 1 instead of automatically
3861 module_param_named(no_sleep_autoadjust
, iwlagn_mod_params
.no_sleep_autoadjust
,
3863 MODULE_PARM_DESC(no_sleep_autoadjust
,
3864 "don't automatically adjust sleep level "
3865 "according to maximum network latency (default: true)");