drivers/net/enic/vnic_devcmd.h

   1 /*
   2  * Copyright 2008-2010 Cisco Systems, Inc.  All rights reserved.
   3  * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
   4  *
   5  * This program is free software; you may redistribute it and/or modify
   6  * it under the terms of the GNU General Public License as published by
   7  * the Free Software Foundation; version 2 of the License.
   8  *
   9  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  10  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
  11  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  12  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
  13  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
  14  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
  15  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  16  * SOFTWARE.
  17  *
  18  */
  19
  20 #ifndef _VNIC_DEVCMD_H_
  21 #define _VNIC_DEVCMD_H_
  22
  23 #define _CMD_NBITS      14
  24 #define _CMD_VTYPEBITS  10
  25 #define _CMD_FLAGSBITS  6
  26 #define _CMD_DIRBITS    2
  27
  28 #define _CMD_NMASK      ((1 << _CMD_NBITS)-1)
  29 #define _CMD_VTYPEMASK  ((1 << _CMD_VTYPEBITS)-1)
  30 #define _CMD_FLAGSMASK  ((1 << _CMD_FLAGSBITS)-1)
  31 #define _CMD_DIRMASK    ((1 << _CMD_DIRBITS)-1)
  32
  33 #define _CMD_NSHIFT     0
  34 #define _CMD_VTYPESHIFT (_CMD_NSHIFT+_CMD_NBITS)
  35 #define _CMD_FLAGSSHIFT (_CMD_VTYPESHIFT+_CMD_VTYPEBITS)
  36 #define _CMD_DIRSHIFT   (_CMD_FLAGSSHIFT+_CMD_FLAGSBITS)
  37
  38 /*
  39  * Direction bits (from host perspective).
  40  */
  41 #define _CMD_DIR_NONE   0U
  42 #define _CMD_DIR_WRITE  1U
  43 #define _CMD_DIR_READ   2U
  44 #define _CMD_DIR_RW     (_CMD_DIR_WRITE | _CMD_DIR_READ)
  45
  46 /*
  47  * Flag bits.
  48  */
  49 #define _CMD_FLAGS_NONE 0U
  50 #define _CMD_FLAGS_NOWAIT 1U
  51
  52 /*
  53  * vNIC type bits.
  54  */
  55 #define _CMD_VTYPE_NONE  0U
  56 #define _CMD_VTYPE_ENET  1U
  57 #define _CMD_VTYPE_FC    2U
  58 #define _CMD_VTYPE_SCSI  4U
  59 #define _CMD_VTYPE_ALL   (_CMD_VTYPE_ENET | _CMD_VTYPE_FC | _CMD_VTYPE_SCSI)
  60
  61 /*
  62  * Used to create cmds..
  63 */
  64 #define _CMDCF(dir, flags, vtype, nr)  \
  65         (((dir)   << _CMD_DIRSHIFT) | \
  66         ((flags) << _CMD_FLAGSSHIFT) | \
  67         ((vtype) << _CMD_VTYPESHIFT) | \
  68         ((nr)    << _CMD_NSHIFT))
  69 #define _CMDC(dir, vtype, nr)    _CMDCF(dir, 0, vtype, nr)
  70 #define _CMDCNW(dir, vtype, nr)  _CMDCF(dir, _CMD_FLAGS_NOWAIT, vtype, nr)
  71
  72 /*
  73  * Used to decode cmds..
  74 */
  75 #define _CMD_DIR(cmd)            (((cmd) >> _CMD_DIRSHIFT) & _CMD_DIRMASK)
  76 #define _CMD_FLAGS(cmd)          (((cmd) >> _CMD_FLAGSSHIFT) & _CMD_FLAGSMASK)
  77 #define _CMD_VTYPE(cmd)          (((cmd) >> _CMD_VTYPESHIFT) & _CMD_VTYPEMASK)
  78 #define _CMD_N(cmd)              (((cmd) >> _CMD_NSHIFT) & _CMD_NMASK)
  79
  80 enum vnic_devcmd_cmd {
  81         CMD_NONE                = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_NONE, 0),
  82
  83         /*
  84          * mcpu fw info in mem:
  85          * in:
  86          *   (u64)a0=paddr to struct vnic_devcmd_fw_info
  87          * action:
  88          *   Fills in struct vnic_devcmd_fw_info (128 bytes)
  89          * note:
  90          *   An old definition of CMD_MCPU_FW_INFO
  91          */
  92         CMD_MCPU_FW_INFO_OLD    = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 1),
  93
  94         /*
  95          * mcpu fw info in mem:
  96          * in:
  97          *   (u64)a0=paddr to struct vnic_devcmd_fw_info
  98          *   (u16)a1=size of the structure
  99          * out:
 100          *       (u16)a1=0                          for in:a1 = 0,
 101          *               data size actually written for other values.
 102          * action:
 103          *   Fills in first 128 bytes of vnic_devcmd_fw_info for in:a1 = 0,
 104          *            first in:a1 bytes               for 0 < in:a1 <= 132,
 105          *            132 bytes                       for other values of in:a1.
 106          * note:
 107          *   CMD_MCPU_FW_INFO and CMD_MCPU_FW_INFO_OLD have the same enum 1
 108          *   for source compatibility.
 109          */
 110         CMD_MCPU_FW_INFO        = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 1),
 111
 112         /* dev-specific block member:
 113          *    in: (u16)a0=offset,(u8)a1=size
 114          *    out: a0=value */
 115         CMD_DEV_SPEC            = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 2),
 116
 117         /* stats clear */
 118         CMD_STATS_CLEAR         = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 3),
 119
 120         /* stats dump in mem: (u64)a0=paddr to stats area,
 121          *                    (u16)a1=sizeof stats area */
 122         CMD_STATS_DUMP          = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 4),
 123
 124         /* set Rx packet filter: (u32)a0=filters (see CMD_PFILTER_*) */
 125         CMD_PACKET_FILTER       = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 7),
 126
 127         /* set Rx packet filter for all: (u32)a0=filters (see CMD_PFILTER_*) */
 128         CMD_PACKET_FILTER_ALL   = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 7),
 129
 130         /* hang detection notification */
 131         CMD_HANG_NOTIFY         = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 8),
 132
 133         /* MAC address in (u48)a0 */
 134         CMD_MAC_ADDR            = _CMDC(_CMD_DIR_READ,
 135                                         _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 9),
 136
 137         /* add addr from (u48)a0 */
 138         CMD_ADDR_ADD            = _CMDCNW(_CMD_DIR_WRITE,
 139                                         _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 12),
 140
 141         /* del addr from (u48)a0 */
 142         CMD_ADDR_DEL            = _CMDCNW(_CMD_DIR_WRITE,
 143                                         _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 13),
 144
 145         /* add VLAN id in (u16)a0 */
 146         CMD_VLAN_ADD            = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 14),
 147
 148         /* del VLAN id in (u16)a0 */
 149         CMD_VLAN_DEL            = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 15),
 150
 151         /* nic_cfg in (u32)a0 */
 152         CMD_NIC_CFG             = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 16),
 153
 154         /* union vnic_rss_key in mem: (u64)a0=paddr, (u16)a1=len */
 155         CMD_RSS_KEY             = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 17),
 156
 157         /* union vnic_rss_cpu in mem: (u64)a0=paddr, (u16)a1=len */
 158         CMD_RSS_CPU             = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 18),
 159
 160         /* initiate softreset */
 161         CMD_SOFT_RESET          = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 19),
 162
 163         /* softreset status:
 164          *    out: a0=0 reset complete, a0=1 reset in progress */
 165         CMD_SOFT_RESET_STATUS   = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 20),
 166
 167         /* set struct vnic_devcmd_notify buffer in mem:
 168          * in:
 169          *   (u64)a0=paddr to notify (set paddr=0 to unset)
 170          *   (u32)a1 & 0x00000000ffffffff=sizeof(struct vnic_devcmd_notify)
 171          *   (u16)a1 & 0x0000ffff00000000=intr num (-1 for no intr)
 172          * out:
 173          *   (u32)a1 = effective size
 174          */
 175         CMD_NOTIFY              = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 21),
 176
 177         /* UNDI API: (u64)a0=paddr to s_PXENV_UNDI_ struct,
 178          *           (u8)a1=PXENV_UNDI_xxx */
 179         CMD_UNDI                = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 22),
 180
 181         /* initiate open sequence (u32)a0=flags (see CMD_OPENF_*) */
 182         CMD_OPEN                = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 23),
 183
 184         /* open status:
 185          *    out: a0=0 open complete, a0=1 open in progress */
 186         CMD_OPEN_STATUS         = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 24),
 187
 188         /* close vnic */
 189         CMD_CLOSE               = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 25),
 190
 191         /* initialize virtual link: (u32)a0=flags (see CMD_INITF_*) */
 192 /***** Replaced by CMD_INIT *****/
 193         CMD_INIT_v1             = _CMDCNW(_CMD_DIR_READ, _CMD_VTYPE_ALL, 26),
 194
 195         /* variant of CMD_INIT, with provisioning info
 196          *     (u64)a0=paddr of vnic_devcmd_provinfo
 197          *     (u32)a1=sizeof provision info */
 198         CMD_INIT_PROV_INFO      = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 27),
 199
 200         /* enable virtual link */
 201         CMD_ENABLE              = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 28),
 202
 203         /* enable virtual link, waiting variant. */
 204         CMD_ENABLE_WAIT         = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 28),
 205
 206         /* disable virtual link */
 207         CMD_DISABLE             = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 29),
 208
 209         /* stats dump sum of all vnic stats on same uplink in mem:
 210          *     (u64)a0=paddr
 211          *     (u16)a1=sizeof stats area */
 212         CMD_STATS_DUMP_ALL      = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 30),
 213
 214         /* init status:
 215          *    out: a0=0 init complete, a0=1 init in progress
 216          *         if a0=0, a1=errno */
 217         CMD_INIT_STATUS         = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 31),
 218
 219         /* INT13 API: (u64)a0=paddr to vnic_int13_params struct
 220          *            (u32)a1=INT13_CMD_xxx */
 221         CMD_INT13               = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_FC, 32),
 222
 223         /* logical uplink enable/disable: (u64)a0: 0/1=disable/enable */
 224         CMD_LOGICAL_UPLINK      = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 33),
 225
 226         /* undo initialize of virtual link */
 227         CMD_DEINIT              = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 34),
 228
 229         /* initialize virtual link: (u32)a0=flags (see CMD_INITF_*) */
 230         CMD_INIT                = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 35),
 231
 232         /* check fw capability of a cmd:
 233          * in:  (u32)a0=cmd
 234          * out: (u32)a0=errno, 0:valid cmd, a1=supported VNIC_STF_* bits */
 235         CMD_CAPABILITY          = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 36),
 236
 237         /* persistent binding info
 238          * in:  (u64)a0=paddr of arg
 239          *      (u32)a1=CMD_PERBI_XXX */
 240         CMD_PERBI               = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_FC, 37),
 241
 242         /* Interrupt Assert Register functionality
 243          * in: (u16)a0=interrupt number to assert
 244          */
 245         CMD_IAR                 = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 38),
 246
 247         /* initiate hangreset, like softreset after hang detected */
 248         CMD_HANG_RESET          = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 39),
 249
 250         /* hangreset status:
 251          *    out: a0=0 reset complete, a0=1 reset in progress */
 252         CMD_HANG_RESET_STATUS   = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 40),
 253
 254         /*
 255          * Set hw ingress packet vlan rewrite mode:
 256          * in:  (u32)a0=new vlan rewrite mode
 257          * out: (u32)a0=old vlan rewrite mode */
 258         CMD_IG_VLAN_REWRITE_MODE = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ENET, 41),
 259
 260         /*
 261          * in:  (u16)a0=bdf of target vnic
 262          *      (u32)a1=cmd to proxy
 263          *      a2-a15=args to cmd in a1
 264          * out: (u32)a0=status of proxied cmd
 265          *      a1-a15=out args of proxied cmd */
 266         CMD_PROXY_BY_BDF =      _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 42),
 267
 268         /*
 269          * As for BY_BDF except a0 is index of hvnlink subordinate vnic
 270          * or SR-IOV virtual vnic
 271          */
 272         CMD_PROXY_BY_INDEX =    _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 43),
 273
 274         /*
 275          * For HPP toggle:
 276          * adapter-info-get
 277          * in:  (u64)a0=phsical address of buffer passed in from caller.
 278          *      (u16)a1=size of buffer specified in a0.
 279          * out: (u64)a0=phsical address of buffer passed in from caller.
 280          *      (u16)a1=actual bytes from VIF-CONFIG-INFO TLV, or
 281          *              0 if no VIF-CONFIG-INFO TLV was ever received. */
 282         CMD_CONFIG_INFO_GET     = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 44),
 283
 284         /* init_prov_info2:
 285          * Variant of CMD_INIT_PROV_INFO, where it will not try to enable
 286          * the vnic until CMD_ENABLE2 is issued.
 287          *     (u64)a0=paddr of vnic_devcmd_provinfo
 288          *     (u32)a1=sizeof provision info */
 289         CMD_INIT_PROV_INFO2  = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 47),
 290
 291         /* enable2:
 292          *      (u32)a0=0                  ==> standby
 293          *             =CMD_ENABLE2_ACTIVE ==> active
 294          */
 295         CMD_ENABLE2 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 48),
 296
 297         /*
 298          * cmd_status:
 299          *     Returns the status of the specified command
 300          * Input:
 301          *     a0 = command for which status is being queried.
 302          *          Possible values are:
 303          *              CMD_SOFT_RESET
 304          *              CMD_HANG_RESET
 305          *              CMD_OPEN
 306          *              CMD_INIT
 307          *              CMD_INIT_PROV_INFO
 308          *              CMD_DEINIT
 309          *              CMD_INIT_PROV_INFO2
 310          *              CMD_ENABLE2
 311          * Output:
 312          *     if status == STAT_ERROR
 313          *        a0 = ERR_ENOTSUPPORTED - status for command in a0 is
 314          *                                 not supported
 315          *     if status == STAT_NONE
 316          *        a0 = status of the devcmd specified in a0 as follows.
 317          *             ERR_SUCCESS   - command in a0 completed successfully
 318          *             ERR_EINPROGRESS - command in a0 is still in progress
 319          */
 320         CMD_STATUS = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 49),
 321
 322         /*
 323          * Returns interrupt coalescing timer conversion factors.
 324          * After calling this devcmd, ENIC driver can convert
 325          * interrupt coalescing timer in usec into CPU cycles as follows:
 326          *
 327          *   intr_timer_cycles = intr_timer_usec * multiplier / divisor
 328          *
 329          * Interrupt coalescing timer in usecs can be obtained from
 330          * CPU cycles as follows:
 331          *
 332          *   intr_timer_usec = intr_timer_cycles * divisor / multiplier
 333          *
 334          * in: none
 335          * out: (u32)a0 = multiplier
 336          *      (u32)a1 = divisor
 337          *      (u32)a2 = maximum timer value in usec
 338          */
 339         CMD_INTR_COAL_CONVERT = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 50),
 340 };
 341
 342 /* CMD_ENABLE2 flags */
 343 #define CMD_ENABLE2_ACTIVE  0x1
 344
 345 /* flags for CMD_OPEN */
 346 #define CMD_OPENF_OPROM         0x1     /* open coming from option rom */
 347
 348 /* flags for CMD_INIT */
 349 #define CMD_INITF_DEFAULT_MAC   0x1     /* init with default mac addr */
 350
 351 /* flags for CMD_PACKET_FILTER */
 352 #define CMD_PFILTER_DIRECTED            0x01
 353 #define CMD_PFILTER_MULTICAST           0x02
 354 #define CMD_PFILTER_BROADCAST           0x04
 355 #define CMD_PFILTER_PROMISCUOUS         0x08
 356 #define CMD_PFILTER_ALL_MULTICAST       0x10
 357
 358 /* rewrite modes for CMD_IG_VLAN_REWRITE_MODE */
 359 #define IG_VLAN_REWRITE_MODE_DEFAULT_TRUNK              0
 360 #define IG_VLAN_REWRITE_MODE_UNTAG_DEFAULT_VLAN         1
 361 #define IG_VLAN_REWRITE_MODE_PRIORITY_TAG_DEFAULT_VLAN  2
 362 #define IG_VLAN_REWRITE_MODE_PASS_THRU                  3
 363
 364 enum vnic_devcmd_status {
 365         STAT_NONE = 0,
 366         STAT_BUSY = 1 << 0,     /* cmd in progress */
 367         STAT_ERROR = 1 << 1,    /* last cmd caused error (code in a0) */
 368 };
 369
 370 enum vnic_devcmd_error {
 371         ERR_SUCCESS = 0,
 372         ERR_EINVAL = 1,
 373         ERR_EFAULT = 2,
 374         ERR_EPERM = 3,
 375         ERR_EBUSY = 4,
 376         ERR_ECMDUNKNOWN = 5,
 377         ERR_EBADSTATE = 6,
 378         ERR_ENOMEM = 7,
 379         ERR_ETIMEDOUT = 8,
 380         ERR_ELINKDOWN = 9,
 381         ERR_EMAXRES = 10,
 382         ERR_ENOTSUPPORTED = 11,
 383         ERR_EINPROGRESS = 12,
 384 };
 385
 386 /*
 387  * note: hw_version and asic_rev refer to the same thing,
 388  *       but have different formats. hw_version is
 389  *       a 32-byte string (e.g. "A2") and asic_rev is
 390  *       a 16-bit integer (e.g. 0xA2).
 391  */
 392 struct vnic_devcmd_fw_info {
 393         char fw_version[32];
 394         char fw_build[32];
 395         char hw_version[32];
 396         char hw_serial_number[32];
 397         u16 asic_type;
 398         u16 asic_rev;
 399 };
 400
 401 struct vnic_devcmd_notify {
 402         u32 csum;               /* checksum over following words */
 403
 404         u32 link_state;         /* link up == 1 */
 405         u32 port_speed;         /* effective port speed (rate limit) */
 406         u32 mtu;                /* MTU */
 407         u32 msglvl;             /* requested driver msg lvl */
 408         u32 uif;                /* uplink interface */
 409         u32 status;             /* status bits (see VNIC_STF_*) */
 410         u32 error;              /* error code (see ERR_*) for first ERR */
 411         u32 link_down_cnt;      /* running count of link down transitions */
 412         u32 perbi_rebuild_cnt;  /* running count of perbi rebuilds */
 413 };
 414 #define VNIC_STF_FATAL_ERR      0x0001  /* fatal fw error */
 415 #define VNIC_STF_STD_PAUSE      0x0002  /* standard link-level pause on */
 416 #define VNIC_STF_PFC_PAUSE      0x0004  /* priority flow control pause on */
 417 /* all supported status flags */
 418 #define VNIC_STF_ALL            (VNIC_STF_FATAL_ERR |\
 419                                  VNIC_STF_STD_PAUSE |\
 420                                  VNIC_STF_PFC_PAUSE |\
 421                                  0)
 422
 423 struct vnic_devcmd_provinfo {
 424         u8 oui[3];
 425         u8 type;
 426         u8 data[0];
 427 };
 428
 429 /*
 430  * Writing cmd register causes STAT_BUSY to get set in status register.
 431  * When cmd completes, STAT_BUSY will be cleared.
 432  *
 433  * If cmd completed successfully STAT_ERROR will be clear
 434  * and args registers contain cmd-specific results.
 435  *
 436  * If cmd error, STAT_ERROR will be set and args[0] contains error code.
 437  *
 438  * status register is read-only.  While STAT_BUSY is set,
 439  * all other register contents are read-only.
 440  */
 441
 442 /* Make sizeof(vnic_devcmd) a power-of-2 for I/O BAR. */
 443 #define VNIC_DEVCMD_NARGS 15
 444 struct vnic_devcmd {
 445         u32 status;                     /* RO */
 446         u32 cmd;                        /* RW */
 447         u64 args[VNIC_DEVCMD_NARGS];    /* RW cmd args (little-endian) */
 448 };
 449
 450 #endif /* _VNIC_DEVCMD_H_ */