1 /* linux/arch/arm/mach-s3c2410/s3c2410.c
3 * Copyright (c) 2003-2005 Simtec Electronics
4 * Ben Dooks <ben@simtec.co.uk>
6 * http://www.simtec.co.uk/products/EB2410ITX/
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
13 #include <linux/kernel.h>
14 #include <linux/types.h>
15 #include <linux/interrupt.h>
16 #include <linux/list.h>
17 #include <linux/timer.h>
18 #include <linux/init.h>
19 #include <linux/gpio.h>
20 #include <linux/clk.h>
21 #include <linux/sysdev.h>
22 #include <linux/serial_core.h>
23 #include <linux/platform_device.h>
26 #include <asm/mach/arch.h>
27 #include <asm/mach/map.h>
28 #include <asm/mach/irq.h>
30 #include <mach/hardware.h>
33 #include <plat/cpu-freq.h>
35 #include <mach/regs-clock.h>
36 #include <plat/regs-serial.h>
38 #include <plat/s3c2410.h>
40 #include <plat/devs.h>
41 #include <plat/clock.h>
44 #include <plat/gpio-core.h>
45 #include <plat/gpio-cfg.h>
46 #include <plat/gpio-cfg-helpers.h>
48 /* Initial IO mappings */
50 static struct map_desc s3c2410_iodesc
[] __initdata
= {
56 /* our uart devices */
58 /* uart registration process */
60 void __init
s3c2410_init_uarts(struct s3c2410_uartcfg
*cfg
, int no
)
62 s3c24xx_init_uartdevs("s3c2410-uart", s3c2410_uart_resources
, cfg
, no
);
67 * register the standard cpu IO areas, and any passed in from the
68 * machine specific initialisation.
71 void __init
s3c2410_map_io(void)
73 s3c24xx_gpiocfg_default
.set_pull
= s3c_gpio_setpull_1up
;
74 s3c24xx_gpiocfg_default
.get_pull
= s3c_gpio_getpull_1up
;
76 iotable_init(s3c2410_iodesc
, ARRAY_SIZE(s3c2410_iodesc
));
79 void __init_or_cpufreq
s3c2410_setup_clocks(void)
88 xtal_clk
= clk_get(NULL
, "xtal");
89 xtal
= clk_get_rate(xtal_clk
);
92 /* now we've got our machine bits initialised, work out what
95 fclk
= s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON
), xtal
);
97 tmp
= __raw_readl(S3C2410_CLKDIVN
);
99 /* work out clock scalings */
101 hclk
= fclk
/ ((tmp
& S3C2410_CLKDIVN_HDIVN
) ? 2 : 1);
102 pclk
= hclk
/ ((tmp
& S3C2410_CLKDIVN_PDIVN
) ? 2 : 1);
104 /* print brieft summary of clocks, etc */
106 printk("S3C2410: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
107 print_mhz(fclk
), print_mhz(hclk
), print_mhz(pclk
));
109 /* initialise the clocks here, to allow other things like the
110 * console to use them
113 s3c24xx_setup_clocks(fclk
, hclk
, pclk
);
116 /* fake ARMCLK for use with cpufreq, etc. */
118 static struct clk s3c2410_armclk
= {
124 void __init
s3c2410_init_clocks(int xtal
)
126 s3c24xx_register_baseclocks(xtal
);
127 s3c2410_setup_clocks();
128 s3c2410_baseclk_add();
129 s3c24xx_register_clock(&s3c2410_armclk
);
132 struct sysdev_class s3c2410_sysclass
= {
133 .name
= "s3c2410-core",
136 /* Note, we would have liked to name this s3c2410-core, but we cannot
137 * register two sysdev_class with the same name.
139 struct sysdev_class s3c2410a_sysclass
= {
140 .name
= "s3c2410a-core",
143 static struct sys_device s3c2410_sysdev
= {
144 .cls
= &s3c2410_sysclass
,
147 /* need to register class before we actually register the device, and
148 * we also need to ensure that it has been initialised before any of the
149 * drivers even try to use it (even if not on an s3c2410 based system)
150 * as a driver which may support both 2410 and 2440 may try and use it.
153 static int __init
s3c2410_core_init(void)
155 return sysdev_class_register(&s3c2410_sysclass
);
158 core_initcall(s3c2410_core_init
);
160 static int __init
s3c2410a_core_init(void)
162 return sysdev_class_register(&s3c2410a_sysclass
);
165 core_initcall(s3c2410a_core_init
);
167 int __init
s3c2410_init(void)
169 printk("S3C2410: Initialising architecture\n");
171 return sysdev_register(&s3c2410_sysdev
);
174 int __init
s3c2410a_init(void)
176 s3c2410_sysdev
.cls
= &s3c2410a_sysclass
;
177 return s3c2410_init();