2 * Copyright (C) 2000 Deep Blue Solutions Ltd
3 * Copyright (C) 2002 Shane Nay (shane@minirl.com)
4 * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
5 * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
18 #include <linux/types.h>
19 #include <linux/init.h>
20 #include <linux/kernel.h>
21 #include <linux/memory.h>
22 #include <linux/platform_device.h>
23 #include <linux/gpio.h>
24 #include <linux/smsc911x.h>
25 #include <linux/mfd/mc13783.h>
26 #include <linux/spi/spi.h>
27 #include <linux/usb/otg.h>
28 #include <linux/usb/ulpi.h>
29 #include <linux/mtd/physmap.h>
31 #include <asm/mach-types.h>
32 #include <asm/mach/arch.h>
33 #include <asm/mach/time.h>
34 #include <asm/mach/map.h>
36 #include <asm/setup.h>
38 #include <mach/hardware.h>
39 #include <mach/common.h>
40 #include <mach/board-mx31lite.h>
41 #include <mach/iomux-mx3.h>
42 #include <mach/irqs.h>
43 #include <mach/mxc_ehci.h>
44 #include <mach/ulpi.h>
46 #include "devices-imx31.h"
50 * This file contains the module-specific initialization routines.
53 static unsigned int mx31lite_pins
[] = {
55 IOMUX_MODE(MX31_PIN_SFS6
, IOMUX_CONFIG_GPIO
),
57 MX31_PIN_CSPI2_SCLK__SCLK
,
58 MX31_PIN_CSPI2_MOSI__MOSI
,
59 MX31_PIN_CSPI2_MISO__MISO
,
60 MX31_PIN_CSPI2_SPI_RDY__SPI_RDY
,
61 MX31_PIN_CSPI2_SS0__SS0
,
62 MX31_PIN_CSPI2_SS1__SS1
,
63 MX31_PIN_CSPI2_SS2__SS2
,
66 static const struct mxc_nand_platform_data
67 mx31lite_nand_board_info __initconst
= {
72 static struct smsc911x_platform_config smsc911x_config
= {
73 .irq_polarity
= SMSC911X_IRQ_POLARITY_ACTIVE_LOW
,
74 .irq_type
= SMSC911X_IRQ_TYPE_PUSH_PULL
,
75 .flags
= SMSC911X_USE_16BIT
,
78 static struct resource smsc911x_resources
[] = {
80 .start
= MX31_CS4_BASE_ADDR
,
81 .end
= MX31_CS4_BASE_ADDR
+ 0x100,
82 .flags
= IORESOURCE_MEM
,
84 .start
= IOMUX_TO_IRQ(MX31_PIN_SFS6
),
85 .end
= IOMUX_TO_IRQ(MX31_PIN_SFS6
),
86 .flags
= IORESOURCE_IRQ
,
90 static struct platform_device smsc911x_device
= {
93 .num_resources
= ARRAY_SIZE(smsc911x_resources
),
94 .resource
= smsc911x_resources
,
96 .platform_data
= &smsc911x_config
,
103 * The MC13783 is the only hard-wired SPI device on the module.
106 static int spi_internal_chipselect
[] = {
110 static const struct spi_imx_master spi1_pdata __initconst
= {
111 .chipselect
= spi_internal_chipselect
,
112 .num_chipselect
= ARRAY_SIZE(spi_internal_chipselect
),
115 static struct mc13783_platform_data mc13783_pdata __initdata
= {
116 .flags
= MC13783_USE_RTC
|
117 MC13783_USE_REGULATOR
,
120 static struct spi_board_info mc13783_spi_dev __initdata
= {
121 .modalias
= "mc13783",
122 .max_speed_hz
= 1000000,
125 .platform_data
= &mc13783_pdata
,
126 .irq
= IOMUX_TO_IRQ(MX31_PIN_GPIO1_3
),
133 #if defined(CONFIG_USB_ULPI)
134 #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
135 PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
137 static int usbh2_init(struct platform_device
*pdev
)
140 MX31_PIN_USBH2_DATA0__USBH2_DATA0
,
141 MX31_PIN_USBH2_DATA1__USBH2_DATA1
,
142 MX31_PIN_USBH2_CLK__USBH2_CLK
,
143 MX31_PIN_USBH2_DIR__USBH2_DIR
,
144 MX31_PIN_USBH2_NXT__USBH2_NXT
,
145 MX31_PIN_USBH2_STP__USBH2_STP
,
148 mxc_iomux_setup_multiple_pins(pins
, ARRAY_SIZE(pins
), "USB H2");
150 mxc_iomux_set_pad(MX31_PIN_USBH2_CLK
, USB_PAD_CFG
);
151 mxc_iomux_set_pad(MX31_PIN_USBH2_DIR
, USB_PAD_CFG
);
152 mxc_iomux_set_pad(MX31_PIN_USBH2_NXT
, USB_PAD_CFG
);
153 mxc_iomux_set_pad(MX31_PIN_USBH2_STP
, USB_PAD_CFG
);
154 mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0
, USB_PAD_CFG
);
155 mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1
, USB_PAD_CFG
);
156 mxc_iomux_set_pad(MX31_PIN_SRXD6
, USB_PAD_CFG
);
157 mxc_iomux_set_pad(MX31_PIN_STXD6
, USB_PAD_CFG
);
158 mxc_iomux_set_pad(MX31_PIN_SFS3
, USB_PAD_CFG
);
159 mxc_iomux_set_pad(MX31_PIN_SCK3
, USB_PAD_CFG
);
160 mxc_iomux_set_pad(MX31_PIN_SRXD3
, USB_PAD_CFG
);
161 mxc_iomux_set_pad(MX31_PIN_STXD3
, USB_PAD_CFG
);
163 mxc_iomux_set_gpr(MUX_PGP_UH2
, true);
166 mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1
, IOMUX_CONFIG_GPIO
),
168 gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1
), "USBH2 CS");
169 gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1
), 0);
174 static struct mxc_usbh_platform_data usbh2_pdata
= {
176 .portsc
= MXC_EHCI_MODE_ULPI
| MXC_EHCI_UTMI_8BIT
,
177 .flags
= MXC_EHCI_POWER_PINS_ENABLED
,
185 static struct physmap_flash_data nor_flash_data
= {
189 static struct resource nor_flash_resource
= {
192 .flags
= IORESOURCE_MEM
,
195 static struct platform_device physmap_flash_device
= {
196 .name
= "physmap-flash",
199 .platform_data
= &nor_flash_data
,
201 .resource
= &nor_flash_resource
,
208 * This structure defines the MX31 memory map.
210 static struct map_desc mx31lite_io_desc
[] __initdata
= {
212 .virtual = MX31_CS4_BASE_ADDR_VIRT
,
213 .pfn
= __phys_to_pfn(MX31_CS4_BASE_ADDR
),
214 .length
= MX31_CS4_SIZE
,
220 * Set up static virtual mappings.
222 void __init
mx31lite_map_io(void)
225 iotable_init(mx31lite_io_desc
, ARRAY_SIZE(mx31lite_io_desc
));
228 static int mx31lite_baseboard
;
229 core_param(mx31lite_baseboard
, mx31lite_baseboard
, int, 0444);
231 static void __init
mxc_board_init(void)
235 switch (mx31lite_baseboard
) {
236 case MX31LITE_NOBOARD
:
242 printk(KERN_ERR
"Illegal mx31lite_baseboard type %d\n",
246 mxc_iomux_setup_multiple_pins(mx31lite_pins
, ARRAY_SIZE(mx31lite_pins
),
249 /* NOR and NAND flash */
250 platform_device_register(&physmap_flash_device
);
251 imx31_add_mxc_nand(&mx31lite_nand_board_info
);
253 imx31_add_spi_imx1(&spi1_pdata
);
254 spi_register_board_info(&mc13783_spi_dev
, 1);
256 #if defined(CONFIG_USB_ULPI)
258 usbh2_pdata
.otg
= otg_ulpi_create(&mxc_ulpi_access_ops
,
259 ULPI_OTG_DRVVBUS
| ULPI_OTG_DRVVBUS_EXT
);
261 mxc_register_device(&mxc_usbh2
, &usbh2_pdata
);
264 /* SMSC9117 IRQ pin */
265 ret
= gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6
), "sms9117-irq");
267 pr_warning("could not get LAN irq gpio\n");
269 gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6
));
270 platform_device_register(&smsc911x_device
);
274 static void __init
mx31lite_timer_init(void)
276 mx31_clocks_init(26000000);
279 struct sys_timer mx31lite_timer
= {
280 .init
= mx31lite_timer_init
,
283 MACHINE_START(MX31LITE
, "LogicPD i.MX31 SOM")
284 /* Maintainer: Freescale Semiconductor, Inc. */
285 .phys_io
= MX31_AIPS1_BASE_ADDR
,
286 .io_pg_offst
= (MX31_AIPS1_BASE_ADDR_VIRT
>> 18) & 0xfffc,
287 .boot_params
= MX3x_PHYS_OFFSET
+ 0x100,
288 .map_io
= mx31lite_map_io
,
289 .init_irq
= mx31_init_irq
,
290 .init_machine
= mxc_board_init
,
291 .timer
= &mx31lite_timer
,