include/acpi/actypes.h

   1 /******************************************************************************
   2  *
   3  * Name: actypes.h - Common data types for the entire ACPI subsystem
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2010, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #ifndef __ACTYPES_H__
  45 #define __ACTYPES_H__
  46
  47 /* acpisrc:struct_defs -- for acpisrc conversion */
  48
  49 /*
  50  * ACPI_MACHINE_WIDTH must be specified in an OS- or compiler-dependent header
  51  * and must be either 32 or 64. 16-bit ACPICA is no longer supported, as of
  52  * 12/2006.
  53  */
  54 #ifndef ACPI_MACHINE_WIDTH
  55 #error ACPI_MACHINE_WIDTH not defined
  56 #endif
  57
  58 /*! [Begin] no source code translation */
  59
  60 /*
  61  * Data type ranges
  62  * Note: These macros are designed to be compiler independent as well as
  63  * working around problems that some 32-bit compilers have with 64-bit
  64  * constants.
  65  */
  66 #define ACPI_UINT8_MAX                  (UINT8) (~((UINT8)  0)) /* 0xFF               */
  67 #define ACPI_UINT16_MAX                 (UINT16)(~((UINT16) 0)) /* 0xFFFF             */
  68 #define ACPI_UINT32_MAX                 (UINT32)(~((UINT32) 0)) /* 0xFFFFFFFF         */
  69 #define ACPI_UINT64_MAX                 (UINT64)(~((UINT64) 0)) /* 0xFFFFFFFFFFFFFFFF */
  70 #define ACPI_ASCII_MAX                  0x7F
  71
  72 /*
  73  * Architecture-specific ACPICA Subsystem Data Types
  74  *
  75  * The goal of these types is to provide source code portability across
  76  * 16-bit, 32-bit, and 64-bit targets.
  77  *
  78  * 1) The following types are of fixed size for all targets (16/32/64):
  79  *
  80  * BOOLEAN      Logical boolean
  81  *
  82  * UINT8        8-bit  (1 byte) unsigned value
  83  * UINT16       16-bit (2 byte) unsigned value
  84  * UINT32       32-bit (4 byte) unsigned value
  85  * UINT64       64-bit (8 byte) unsigned value
  86  *
  87  * INT16        16-bit (2 byte) signed value
  88  * INT32        32-bit (4 byte) signed value
  89  * INT64        64-bit (8 byte) signed value
  90  *
  91  * COMPILER_DEPENDENT_UINT64/INT64 - These types are defined in the
  92  * compiler-dependent header(s) and were introduced because there is no common
  93  * 64-bit integer type across the various compilation models, as shown in
  94  * the table below.
  95  *
  96  * Datatype  LP64 ILP64 LLP64 ILP32 LP32 16bit
  97  * char      8    8     8     8     8    8
  98  * short     16   16    16    16    16   16
  99  * _int32         32
 100  * int       32   64    32    32    16   16
 101  * long      64   64    32    32    32   32
 102  * long long            64    64
 103  * pointer   64   64    64    32    32   32
 104  *
 105  * Note: ILP64 and LP32 are currently not supported.
 106  *
 107  *
 108  * 2) These types represent the native word size of the target mode of the
 109  * processor, and may be 16-bit, 32-bit, or 64-bit as required. They are
 110  * usually used for memory allocation, efficient loop counters, and array
 111  * indexes. The types are similar to the size_t type in the C library and are
 112  * required because there is no C type that consistently represents the native
 113  * data width. ACPI_SIZE is needed because there is no guarantee that a
 114  * kernel-level C library is present.
 115  *
 116  * ACPI_SIZE        16/32/64-bit unsigned value
 117  * ACPI_NATIVE_INT  16/32/64-bit signed value
 118  */
 119
 120 /*******************************************************************************
 121  *
 122  * Common types for all compilers, all targets
 123  *
 124  ******************************************************************************/
 125
 126 typedef unsigned char BOOLEAN;
 127 typedef unsigned char UINT8;
 128 typedef unsigned short UINT16;
 129 typedef COMPILER_DEPENDENT_UINT64 UINT64;
 130 typedef COMPILER_DEPENDENT_INT64 INT64;
 131
 132 /*! [End] no source code translation !*/
 133
 134 /*
 135  * Value returned by acpi_os_get_thread_id. There is no standard "thread_id"
 136  * across operating systems or even the various UNIX systems. Since ACPICA
 137  * only needs the thread ID as a unique thread identifier, we use a u64
 138  * as the only common data type - it will accommodate any type of pointer or
 139  * any type of integer. It is up to the host-dependent OSL to cast the
 140  * native thread ID type to a u64 (in acpi_os_get_thread_id).
 141  */
 142 #define acpi_thread_id                  u64
 143
 144 /*******************************************************************************
 145  *
 146  * Types specific to 64-bit targets
 147  *
 148  ******************************************************************************/
 149
 150 #if ACPI_MACHINE_WIDTH == 64
 151
 152 /*! [Begin] no source code translation (keep the typedefs as-is) */
 153
 154 typedef unsigned int UINT32;
 155 typedef int INT32;
 156
 157 /*! [End] no source code translation !*/
 158
 159 typedef s64 acpi_native_int;
 160
 161 typedef u64 acpi_size;
 162 typedef u64 acpi_io_address;
 163 typedef u64 acpi_physical_address;
 164
 165 #define ACPI_MAX_PTR                    ACPI_UINT64_MAX
 166 #define ACPI_SIZE_MAX                   ACPI_UINT64_MAX
 167
 168 #define ACPI_USE_NATIVE_DIVIDE  /* Has native 64-bit integer support */
 169
 170 /*
 171  * In the case of the Itanium Processor Family (IPF), the hardware does not
 172  * support misaligned memory transfers. Set the MISALIGNMENT_NOT_SUPPORTED flag
 173  * to indicate that special precautions must be taken to avoid alignment faults.
 174  * (IA64 or ia64 is currently used by existing compilers to indicate IPF.)
 175  *
 176  * Note: Em64_t and other X86-64 processors support misaligned transfers,
 177  * so there is no need to define this flag.
 178  */
 179 #if defined (__IA64__) || defined (__ia64__)
 180 #define ACPI_MISALIGNMENT_NOT_SUPPORTED
 181 #endif
 182
 183 /*******************************************************************************
 184  *
 185  * Types specific to 32-bit targets
 186  *
 187  ******************************************************************************/
 188
 189 #elif ACPI_MACHINE_WIDTH == 32
 190
 191 /*! [Begin] no source code translation (keep the typedefs as-is) */
 192
 193 typedef unsigned int UINT32;
 194 typedef int INT32;
 195
 196 /*! [End] no source code translation !*/
 197
 198 typedef s32 acpi_native_int;
 199
 200 typedef u32 acpi_size;
 201 typedef u32 acpi_io_address;
 202 typedef u32 acpi_physical_address;
 203
 204 #define ACPI_MAX_PTR                    ACPI_UINT32_MAX
 205 #define ACPI_SIZE_MAX                   ACPI_UINT32_MAX
 206
 207 #else
 208
 209 /* ACPI_MACHINE_WIDTH must be either 64 or 32 */
 210
 211 #error unknown ACPI_MACHINE_WIDTH
 212 #endif
 213
 214 /*******************************************************************************
 215  *
 216  * OS-dependent types
 217  *
 218  * If the defaults below are not appropriate for the host system, they can
 219  * be defined in the OS-specific header, and this will take precedence.
 220  *
 221  ******************************************************************************/
 222
 223 /* Flags for acpi_os_acquire_lock/acpi_os_release_lock */
 224
 225 #ifndef acpi_cpu_flags
 226 #define acpi_cpu_flags                  acpi_size
 227 #endif
 228
 229 /* Object returned from acpi_os_create_cache */
 230
 231 #ifndef acpi_cache_t
 232 #ifdef ACPI_USE_LOCAL_CACHE
 233 #define acpi_cache_t                    struct acpi_memory_list
 234 #else
 235 #define acpi_cache_t                    void *
 236 #endif
 237 #endif
 238
 239 /*
 240  * Synchronization objects - Mutexes, Semaphores, and spin_locks
 241  */
 242 #if (ACPI_MUTEX_TYPE == ACPI_BINARY_SEMAPHORE)
 243 /*
 244  * These macros are used if the host OS does not support a mutex object.
 245  * Map the OSL Mutex interfaces to binary semaphores.
 246  */
 247 #define acpi_mutex                      acpi_semaphore
 248 #define acpi_os_create_mutex(out_handle) acpi_os_create_semaphore (1, 1, out_handle)
 249 #define acpi_os_delete_mutex(handle)    (void) acpi_os_delete_semaphore (handle)
 250 #define acpi_os_acquire_mutex(handle,time) acpi_os_wait_semaphore (handle, 1, time)
 251 #define acpi_os_release_mutex(handle)   (void) acpi_os_signal_semaphore (handle, 1)
 252 #endif
 253
 254 /* Configurable types for synchronization objects */
 255
 256 #ifndef acpi_spinlock
 257 #define acpi_spinlock                   void *
 258 #endif
 259
 260 #ifndef acpi_semaphore
 261 #define acpi_semaphore                  void *
 262 #endif
 263
 264 #ifndef acpi_mutex
 265 #define acpi_mutex                      void *
 266 #endif
 267
 268 /*******************************************************************************
 269  *
 270  * Compiler-dependent types
 271  *
 272  * If the defaults below are not appropriate for the host compiler, they can
 273  * be defined in the compiler-specific header, and this will take precedence.
 274  *
 275  ******************************************************************************/
 276
 277 /* Use C99 uintptr_t for pointer casting if available, "void *" otherwise */
 278
 279 #ifndef acpi_uintptr_t
 280 #define acpi_uintptr_t                  void *
 281 #endif
 282
 283 /*
 284  * ACPI_PRINTF_LIKE is used to tag functions as "printf-like" because
 285  * some compilers can catch printf format string problems
 286  */
 287 #ifndef ACPI_PRINTF_LIKE
 288 #define ACPI_PRINTF_LIKE(c)
 289 #endif
 290
 291 /*
 292  * Some compilers complain about unused variables. Sometimes we don't want to
 293  * use all the variables (for example, _acpi_module_name). This allows us
 294  * to tell the compiler in a per-variable manner that a variable
 295  * is unused
 296  */
 297 #ifndef ACPI_UNUSED_VAR
 298 #define ACPI_UNUSED_VAR
 299 #endif
 300
 301 /*
 302  * All ACPICA functions that are available to the rest of the kernel are
 303  * tagged with this macro which can be defined as appropriate for the host.
 304  */
 305 #ifndef ACPI_EXPORT_SYMBOL
 306 #define ACPI_EXPORT_SYMBOL(symbol)
 307 #endif
 308
 309 /******************************************************************************
 310  *
 311  * ACPI Specification constants (Do not change unless the specification changes)
 312  *
 313  *****************************************************************************/
 314
 315 /* Number of distinct FADT-based GPE register blocks (GPE0 and GPE1) */
 316
 317 #define ACPI_MAX_GPE_BLOCKS             2
 318
 319 /* Default ACPI register widths */
 320
 321 #define ACPI_GPE_REGISTER_WIDTH         8
 322 #define ACPI_PM1_REGISTER_WIDTH         16
 323 #define ACPI_PM2_REGISTER_WIDTH         8
 324 #define ACPI_PM_TIMER_WIDTH             32
 325
 326 /* Names within the namespace are 4 bytes long */
 327
 328 #define ACPI_NAME_SIZE                  4
 329 #define ACPI_PATH_SEGMENT_LENGTH        5       /* 4 chars for name + 1 char for separator */
 330 #define ACPI_PATH_SEPARATOR             '.'
 331
 332 /* Sizes for ACPI table headers */
 333
 334 #define ACPI_OEM_ID_SIZE                6
 335 #define ACPI_OEM_TABLE_ID_SIZE          8
 336
 337 /* ACPI/PNP hardware IDs */
 338
 339 #define PCI_ROOT_HID_STRING             "PNP0A03"
 340 #define PCI_EXPRESS_ROOT_HID_STRING     "PNP0A08"
 341
 342 /* PM Timer ticks per second (HZ) */
 343
 344 #define PM_TIMER_FREQUENCY              3579545
 345
 346 /*******************************************************************************
 347  *
 348  * Independent types
 349  *
 350  ******************************************************************************/
 351
 352 /* Logical defines and NULL */
 353
 354 #ifdef FALSE
 355 #undef FALSE
 356 #endif
 357 #define FALSE                           (1 == 0)
 358
 359 #ifdef TRUE
 360 #undef TRUE
 361 #endif
 362 #define TRUE                            (1 == 1)
 363
 364 #ifndef NULL
 365 #define NULL                            (void *) 0
 366 #endif
 367
 368 /*
 369  * Miscellaneous types
 370  */
 371 typedef u32 acpi_status;        /* All ACPI Exceptions */
 372 typedef u32 acpi_name;          /* 4-byte ACPI name */
 373 typedef char *acpi_string;      /* Null terminated ASCII string */
 374 typedef void *acpi_handle;      /* Actually a ptr to a NS Node */
 375
 376 /* Owner IDs are used to track namespace nodes for selective deletion */
 377
 378 typedef u8 acpi_owner_id;
 379 #define ACPI_OWNER_ID_MAX               0xFF
 380
 381 #define ACPI_INTEGER_BIT_SIZE           64
 382 #define ACPI_MAX_DECIMAL_DIGITS         20      /* 2^64 = 18,446,744,073,709,551,616 */
 383
 384 #if ACPI_MACHINE_WIDTH == 64
 385 #define ACPI_USE_NATIVE_DIVIDE  /* Use compiler native 64-bit divide */
 386 #endif
 387
 388 #define ACPI_MAX64_DECIMAL_DIGITS       20
 389 #define ACPI_MAX32_DECIMAL_DIGITS       10
 390 #define ACPI_MAX16_DECIMAL_DIGITS        5
 391 #define ACPI_MAX8_DECIMAL_DIGITS         3
 392
 393 /* PM Timer ticks per second (HZ) */
 394
 395 #define PM_TIMER_FREQUENCY  3579545
 396
 397 /*
 398  * Constants with special meanings
 399  */
 400 #define ACPI_ROOT_OBJECT                ACPI_ADD_PTR (acpi_handle, NULL, ACPI_MAX_PTR)
 401 #define ACPI_WAIT_FOREVER               0xFFFF  /* u16, as per ACPI spec */
 402 #define ACPI_DO_NOT_WAIT                0
 403
 404 /*
 405  * Obsolete: Acpi integer width. In ACPI version 1 (1996), integers are 32 bits.
 406  * In ACPI version 2 (2000) and later, integers are 64 bits. Note that this
 407  * pertains to the ACPI integer type only, not to other integers used in the
 408  * implementation of the ACPICA subsystem.
 409  *
 410  * 01/2010: This type is obsolete and has been removed from the entire ACPICA
 411  * code base. It remains here for compatibility with device drivers that use
 412  * the type. However, it will be removed in the future.
 413  */
 414 typedef u64 acpi_integer;
 415 #define ACPI_INTEGER_MAX                ACPI_UINT64_MAX
 416
 417 /*******************************************************************************
 418  *
 419  * Commonly used macros
 420  *
 421  ******************************************************************************/
 422
 423 /* Data manipulation */
 424
 425 #define ACPI_LOBYTE(integer)            ((u8)   (u16)(integer))
 426 #define ACPI_HIBYTE(integer)            ((u8) (((u16)(integer)) >> 8))
 427 #define ACPI_LOWORD(integer)            ((u16)  (u32)(integer))
 428 #define ACPI_HIWORD(integer)            ((u16)(((u32)(integer)) >> 16))
 429 #define ACPI_LODWORD(integer64)         ((u32)  (u64)(integer64))
 430 #define ACPI_HIDWORD(integer64)         ((u32)(((u64)(integer64)) >> 32))
 431
 432 #define ACPI_SET_BIT(target,bit)        ((target) |= (bit))
 433 #define ACPI_CLEAR_BIT(target,bit)      ((target) &= ~(bit))
 434 #define ACPI_MIN(a,b)                   (((a)<(b))?(a):(b))
 435 #define ACPI_MAX(a,b)                   (((a)>(b))?(a):(b))
 436
 437 /* Size calculation */
 438
 439 #define ACPI_ARRAY_LENGTH(x)            (sizeof(x) / sizeof((x)[0]))
 440
 441 /* Pointer manipulation */
 442
 443 #define ACPI_CAST_PTR(t, p)             ((t *) (acpi_uintptr_t) (p))
 444 #define ACPI_CAST_INDIRECT_PTR(t, p)    ((t **) (acpi_uintptr_t) (p))
 445 #define ACPI_ADD_PTR(t, a, b)           ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8, (a)) + (acpi_size)(b)))
 446 #define ACPI_PTR_DIFF(a, b)             (acpi_size) (ACPI_CAST_PTR (u8, (a)) - ACPI_CAST_PTR (u8, (b)))
 447
 448 /* Pointer/Integer type conversions */
 449
 450 #define ACPI_TO_POINTER(i)              ACPI_ADD_PTR (void, (void *) NULL,(acpi_size) i)
 451 #define ACPI_TO_INTEGER(p)              ACPI_PTR_DIFF (p, (void *) NULL)
 452 #define ACPI_OFFSET(d, f)               (acpi_size) ACPI_PTR_DIFF (&(((d *)0)->f), (void *) NULL)
 453 #define ACPI_PHYSADDR_TO_PTR(i)         ACPI_TO_POINTER(i)
 454 #define ACPI_PTR_TO_PHYSADDR(i)         ACPI_TO_INTEGER(i)
 455
 456 #ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
 457 #define ACPI_COMPARE_NAME(a,b)          (*ACPI_CAST_PTR (u32, (a)) == *ACPI_CAST_PTR (u32, (b)))
 458 #else
 459 #define ACPI_COMPARE_NAME(a,b)          (!ACPI_STRNCMP (ACPI_CAST_PTR (char, (a)), ACPI_CAST_PTR (char, (b)), ACPI_NAME_SIZE))
 460 #endif
 461
 462 /*******************************************************************************
 463  *
 464  * Miscellaneous constants
 465  *
 466  ******************************************************************************/
 467
 468 /*
 469  * Initialization sequence
 470  */
 471 #define ACPI_FULL_INITIALIZATION        0x00
 472 #define ACPI_NO_ADDRESS_SPACE_INIT      0x01
 473 #define ACPI_NO_HARDWARE_INIT           0x02
 474 #define ACPI_NO_EVENT_INIT              0x04
 475 #define ACPI_NO_HANDLER_INIT            0x08
 476 #define ACPI_NO_ACPI_ENABLE             0x10
 477 #define ACPI_NO_DEVICE_INIT             0x20
 478 #define ACPI_NO_OBJECT_INIT             0x40
 479
 480 /*
 481  * Initialization state
 482  */
 483 #define ACPI_SUBSYSTEM_INITIALIZE       0x01
 484 #define ACPI_INITIALIZED_OK             0x02
 485
 486 /*
 487  * Power state values
 488  */
 489 #define ACPI_STATE_UNKNOWN              (u8) 0xFF
 490
 491 #define ACPI_STATE_S0                   (u8) 0
 492 #define ACPI_STATE_S1                   (u8) 1
 493 #define ACPI_STATE_S2                   (u8) 2
 494 #define ACPI_STATE_S3                   (u8) 3
 495 #define ACPI_STATE_S4                   (u8) 4
 496 #define ACPI_STATE_S5                   (u8) 5
 497 #define ACPI_S_STATES_MAX               ACPI_STATE_S5
 498 #define ACPI_S_STATE_COUNT              6
 499
 500 #define ACPI_STATE_D0                   (u8) 0
 501 #define ACPI_STATE_D1                   (u8) 1
 502 #define ACPI_STATE_D2                   (u8) 2
 503 #define ACPI_STATE_D3                   (u8) 3
 504 #define ACPI_D_STATES_MAX               ACPI_STATE_D3
 505 #define ACPI_D_STATE_COUNT              4
 506
 507 #define ACPI_STATE_C0                   (u8) 0
 508 #define ACPI_STATE_C1                   (u8) 1
 509 #define ACPI_STATE_C2                   (u8) 2
 510 #define ACPI_STATE_C3                   (u8) 3
 511 #define ACPI_C_STATES_MAX               ACPI_STATE_C3
 512 #define ACPI_C_STATE_COUNT              4
 513
 514 /*
 515  * Sleep type invalid value
 516  */
 517 #define ACPI_SLEEP_TYPE_MAX             0x7
 518 #define ACPI_SLEEP_TYPE_INVALID         0xFF
 519
 520 /*
 521  * Standard notify values
 522  */
 523 #define ACPI_NOTIFY_BUS_CHECK           (u8) 0x00
 524 #define ACPI_NOTIFY_DEVICE_CHECK        (u8) 0x01
 525 #define ACPI_NOTIFY_DEVICE_WAKE         (u8) 0x02
 526 #define ACPI_NOTIFY_EJECT_REQUEST       (u8) 0x03
 527 #define ACPI_NOTIFY_DEVICE_CHECK_LIGHT  (u8) 0x04
 528 #define ACPI_NOTIFY_FREQUENCY_MISMATCH  (u8) 0x05
 529 #define ACPI_NOTIFY_BUS_MODE_MISMATCH   (u8) 0x06
 530 #define ACPI_NOTIFY_POWER_FAULT         (u8) 0x07
 531 #define ACPI_NOTIFY_CAPABILITIES_CHECK  (u8) 0x08
 532 #define ACPI_NOTIFY_DEVICE_PLD_CHECK    (u8) 0x09
 533 #define ACPI_NOTIFY_RESERVED            (u8) 0x0A
 534 #define ACPI_NOTIFY_LOCALITY_UPDATE     (u8) 0x0B
 535
 536 #define ACPI_NOTIFY_MAX                 0x0B
 537
 538 /*
 539  * Types associated with ACPI names and objects. The first group of
 540  * values (up to ACPI_TYPE_EXTERNAL_MAX) correspond to the definition
 541  * of the ACPI object_type() operator (See the ACPI Spec). Therefore,
 542  * only add to the first group if the spec changes.
 543  *
 544  * NOTE: Types must be kept in sync with the global acpi_ns_properties
 545  * and acpi_ns_type_names arrays.
 546  */
 547 typedef u32 acpi_object_type;
 548
 549 #define ACPI_TYPE_ANY                   0x00
 550 #define ACPI_TYPE_INTEGER               0x01    /* Byte/Word/Dword/Zero/One/Ones */
 551 #define ACPI_TYPE_STRING                0x02
 552 #define ACPI_TYPE_BUFFER                0x03
 553 #define ACPI_TYPE_PACKAGE               0x04    /* byte_const, multiple data_term/Constant/super_name */
 554 #define ACPI_TYPE_FIELD_UNIT            0x05
 555 #define ACPI_TYPE_DEVICE                0x06    /* Name, multiple Node */
 556 #define ACPI_TYPE_EVENT                 0x07
 557 #define ACPI_TYPE_METHOD                0x08    /* Name, byte_const, multiple Code */
 558 #define ACPI_TYPE_MUTEX                 0x09
 559 #define ACPI_TYPE_REGION                0x0A
 560 #define ACPI_TYPE_POWER                 0x0B    /* Name,byte_const,word_const,multi Node */
 561 #define ACPI_TYPE_PROCESSOR             0x0C    /* Name,byte_const,Dword_const,byte_const,multi nm_o */
 562 #define ACPI_TYPE_THERMAL               0x0D    /* Name, multiple Node */
 563 #define ACPI_TYPE_BUFFER_FIELD          0x0E
 564 #define ACPI_TYPE_DDB_HANDLE            0x0F
 565 #define ACPI_TYPE_DEBUG_OBJECT          0x10
 566
 567 #define ACPI_TYPE_EXTERNAL_MAX          0x10
 568
 569 /*
 570  * These are object types that do not map directly to the ACPI
 571  * object_type() operator. They are used for various internal purposes only.
 572  * If new predefined ACPI_TYPEs are added (via the ACPI specification), these
 573  * internal types must move upwards. (There is code that depends on these
 574  * values being contiguous with the external types above.)
 575  */
 576 #define ACPI_TYPE_LOCAL_REGION_FIELD    0x11
 577 #define ACPI_TYPE_LOCAL_BANK_FIELD      0x12
 578 #define ACPI_TYPE_LOCAL_INDEX_FIELD     0x13
 579 #define ACPI_TYPE_LOCAL_REFERENCE       0x14    /* Arg#, Local#, Name, Debug, ref_of, Index */
 580 #define ACPI_TYPE_LOCAL_ALIAS           0x15
 581 #define ACPI_TYPE_LOCAL_METHOD_ALIAS    0x16
 582 #define ACPI_TYPE_LOCAL_NOTIFY          0x17
 583 #define ACPI_TYPE_LOCAL_ADDRESS_HANDLER 0x18
 584 #define ACPI_TYPE_LOCAL_RESOURCE        0x19
 585 #define ACPI_TYPE_LOCAL_RESOURCE_FIELD  0x1A
 586 #define ACPI_TYPE_LOCAL_SCOPE           0x1B    /* 1 Name, multiple object_list Nodes */
 587
 588 #define ACPI_TYPE_NS_NODE_MAX           0x1B    /* Last typecode used within a NS Node */
 589
 590 /*
 591  * These are special object types that never appear in
 592  * a Namespace node, only in a union acpi_operand_object
 593  */
 594 #define ACPI_TYPE_LOCAL_EXTRA           0x1C
 595 #define ACPI_TYPE_LOCAL_DATA            0x1D
 596
 597 #define ACPI_TYPE_LOCAL_MAX             0x1D
 598
 599 /* All types above here are invalid */
 600
 601 #define ACPI_TYPE_INVALID               0x1E
 602 #define ACPI_TYPE_NOT_FOUND             0xFF
 603
 604 #define ACPI_NUM_NS_TYPES               (ACPI_TYPE_INVALID + 1)
 605
 606 /*
 607  * All I/O
 608  */
 609 #define ACPI_READ                       0
 610 #define ACPI_WRITE                      1
 611 #define ACPI_IO_MASK                    1
 612
 613 /*
 614  * Event Types: Fixed & General Purpose
 615  */
 616 typedef u32 acpi_event_type;
 617
 618 /*
 619  * Fixed events
 620  */
 621 #define ACPI_EVENT_PMTIMER              0
 622 #define ACPI_EVENT_GLOBAL               1
 623 #define ACPI_EVENT_POWER_BUTTON         2
 624 #define ACPI_EVENT_SLEEP_BUTTON         3
 625 #define ACPI_EVENT_RTC                  4
 626 #define ACPI_EVENT_MAX                  4
 627 #define ACPI_NUM_FIXED_EVENTS           ACPI_EVENT_MAX + 1
 628
 629 /*
 630  * Event Status - Per event
 631  * -------------
 632  * The encoding of acpi_event_status is illustrated below.
 633  * Note that a set bit (1) indicates the property is TRUE
 634  * (e.g. if bit 0 is set then the event is enabled).
 635  * +-------------+-+-+-+
 636  * |   Bits 31:3 |2|1|0|
 637  * +-------------+-+-+-+
 638  *          |     | | |
 639  *          |     | | +- Enabled?
 640  *          |     | +--- Enabled for wake?
 641  *          |     +----- Set?
 642  *          +----------- <Reserved>
 643  */
 644 typedef u32 acpi_event_status;
 645
 646 #define ACPI_EVENT_FLAG_DISABLED        (acpi_event_status) 0x00
 647 #define ACPI_EVENT_FLAG_ENABLED         (acpi_event_status) 0x01
 648 #define ACPI_EVENT_FLAG_WAKE_ENABLED    (acpi_event_status) 0x02
 649 #define ACPI_EVENT_FLAG_SET             (acpi_event_status) 0x04
 650 #define ACPI_EVENT_FLAG_HANDLE          (acpi_event_status) 0x08
 651
 652 /*
 653  * General Purpose Events (GPE)
 654  */
 655 #define ACPI_GPE_INVALID                0xFF
 656 #define ACPI_GPE_MAX                    0xFF
 657 #define ACPI_NUM_GPE                    256
 658
 659 /* Actions for acpi_gpe_wakeup, acpi_hw_low_set_gpe */
 660
 661 #define ACPI_GPE_ENABLE                 0
 662 #define ACPI_GPE_DISABLE                1
 663 #define ACPI_GPE_COND_ENABLE            2
 664
 665 /*
 666  * GPE info flags - Per GPE
 667  * +-------+---+-+-+
 668  * |  7:4  |3:2|1|0|
 669  * +-------+---+-+-+
 670  *     |     |  | |
 671  *     |     |  | +--- Interrupt type: edge or level triggered
 672  *     |     |  +----- GPE can wake the system
 673  *     |     +-------- Type of dispatch:to method, handler, or none
 674  *     +-------------- <Reserved>
 675  */
 676 #define ACPI_GPE_XRUPT_TYPE_MASK        (u8) 0x01
 677 #define ACPI_GPE_LEVEL_TRIGGERED        (u8) 0x01
 678 #define ACPI_GPE_EDGE_TRIGGERED         (u8) 0x00
 679
 680 #define ACPI_GPE_CAN_WAKE               (u8) 0x02
 681
 682 #define ACPI_GPE_DISPATCH_MASK          (u8) 0x0C
 683 #define ACPI_GPE_DISPATCH_HANDLER       (u8) 0x04
 684 #define ACPI_GPE_DISPATCH_METHOD        (u8) 0x08
 685 #define ACPI_GPE_DISPATCH_NOT_USED      (u8) 0x00
 686
 687 /*
 688  * Flags for GPE and Lock interfaces
 689  */
 690 #define ACPI_NOT_ISR                    0x1
 691 #define ACPI_ISR                        0x0
 692
 693 /* Notify types */
 694
 695 #define ACPI_SYSTEM_NOTIFY              0x1
 696 #define ACPI_DEVICE_NOTIFY              0x2
 697 #define ACPI_ALL_NOTIFY                 (ACPI_SYSTEM_NOTIFY | ACPI_DEVICE_NOTIFY)
 698 #define ACPI_MAX_NOTIFY_HANDLER_TYPE    0x3
 699
 700 #define ACPI_MAX_SYS_NOTIFY             0x7f
 701
 702 /* Address Space (Operation Region) Types */
 703
 704 typedef u8 acpi_adr_space_type;
 705
 706 #define ACPI_ADR_SPACE_SYSTEM_MEMORY    (acpi_adr_space_type) 0
 707 #define ACPI_ADR_SPACE_SYSTEM_IO        (acpi_adr_space_type) 1
 708 #define ACPI_ADR_SPACE_PCI_CONFIG       (acpi_adr_space_type) 2
 709 #define ACPI_ADR_SPACE_EC               (acpi_adr_space_type) 3
 710 #define ACPI_ADR_SPACE_SMBUS            (acpi_adr_space_type) 4
 711 #define ACPI_ADR_SPACE_CMOS             (acpi_adr_space_type) 5
 712 #define ACPI_ADR_SPACE_PCI_BAR_TARGET   (acpi_adr_space_type) 6
 713 #define ACPI_ADR_SPACE_IPMI             (acpi_adr_space_type) 7
 714 #define ACPI_ADR_SPACE_DATA_TABLE       (acpi_adr_space_type) 8
 715 #define ACPI_ADR_SPACE_FIXED_HARDWARE   (acpi_adr_space_type) 127
 716
 717 /*
 718  * bit_register IDs
 719  *
 720  * These values are intended to be used by the hardware interfaces
 721  * and are mapped to individual bitfields defined within the ACPI
 722  * registers. See the acpi_gbl_bit_register_info global table in utglobal.c
 723  * for this mapping.
 724  */
 725
 726 /* PM1 Status register */
 727
 728 #define ACPI_BITREG_TIMER_STATUS                0x00
 729 #define ACPI_BITREG_BUS_MASTER_STATUS           0x01
 730 #define ACPI_BITREG_GLOBAL_LOCK_STATUS          0x02
 731 #define ACPI_BITREG_POWER_BUTTON_STATUS         0x03
 732 #define ACPI_BITREG_SLEEP_BUTTON_STATUS         0x04
 733 #define ACPI_BITREG_RT_CLOCK_STATUS             0x05
 734 #define ACPI_BITREG_WAKE_STATUS                 0x06
 735 #define ACPI_BITREG_PCIEXP_WAKE_STATUS          0x07
 736
 737 /* PM1 Enable register */
 738
 739 #define ACPI_BITREG_TIMER_ENABLE                0x08
 740 #define ACPI_BITREG_GLOBAL_LOCK_ENABLE          0x09
 741 #define ACPI_BITREG_POWER_BUTTON_ENABLE         0x0A
 742 #define ACPI_BITREG_SLEEP_BUTTON_ENABLE         0x0B
 743 #define ACPI_BITREG_RT_CLOCK_ENABLE             0x0C
 744 #define ACPI_BITREG_PCIEXP_WAKE_DISABLE         0x0D
 745
 746 /* PM1 Control register */
 747
 748 #define ACPI_BITREG_SCI_ENABLE                  0x0E
 749 #define ACPI_BITREG_BUS_MASTER_RLD              0x0F
 750 #define ACPI_BITREG_GLOBAL_LOCK_RELEASE         0x10
 751 #define ACPI_BITREG_SLEEP_TYPE                  0x11
 752 #define ACPI_BITREG_SLEEP_ENABLE                0x12
 753
 754 /* PM2 Control register */
 755
 756 #define ACPI_BITREG_ARB_DISABLE                 0x13
 757
 758 #define ACPI_BITREG_MAX                         0x13
 759 #define ACPI_NUM_BITREG                         ACPI_BITREG_MAX + 1
 760
 761 /* Status register values. A 1 clears a status bit. 0 = no effect */
 762
 763 #define ACPI_CLEAR_STATUS                       1
 764
 765 /* Enable and Control register values */
 766
 767 #define ACPI_ENABLE_EVENT                       1
 768 #define ACPI_DISABLE_EVENT                      0
 769
 770 /*
 771  * External ACPI object definition
 772  */
 773
 774 /*
 775  * Note: Type == ACPI_TYPE_ANY (0) is used to indicate a NULL package element
 776  * or an unresolved named reference.
 777  */
 778 union acpi_object {
 779         acpi_object_type type;  /* See definition of acpi_ns_type for values */
 780         struct {
 781                 acpi_object_type type;  /* ACPI_TYPE_INTEGER */
 782                 u64 value;      /* The actual number */
 783         } integer;
 784
 785         struct {
 786                 acpi_object_type type;  /* ACPI_TYPE_STRING */
 787                 u32 length;     /* # of bytes in string, excluding trailing null */
 788                 char *pointer;  /* points to the string value */
 789         } string;
 790
 791         struct {
 792                 acpi_object_type type;  /* ACPI_TYPE_BUFFER */
 793                 u32 length;     /* # of bytes in buffer */
 794                 u8 *pointer;    /* points to the buffer */
 795         } buffer;
 796
 797         struct {
 798                 acpi_object_type type;  /* ACPI_TYPE_PACKAGE */
 799                 u32 count;      /* # of elements in package */
 800                 union acpi_object *elements;    /* Pointer to an array of ACPI_OBJECTs */
 801         } package;
 802
 803         struct {
 804                 acpi_object_type type;  /* ACPI_TYPE_LOCAL_REFERENCE */
 805                 acpi_object_type actual_type;   /* Type associated with the Handle */
 806                 acpi_handle handle;     /* object reference */
 807         } reference;
 808
 809         struct {
 810                 acpi_object_type type;  /* ACPI_TYPE_PROCESSOR */
 811                 u32 proc_id;
 812                 acpi_io_address pblk_address;
 813                 u32 pblk_length;
 814         } processor;
 815
 816         struct {
 817                 acpi_object_type type;  /* ACPI_TYPE_POWER */
 818                 u32 system_level;
 819                 u32 resource_order;
 820         } power_resource;
 821 };
 822
 823 /*
 824  * List of objects, used as a parameter list for control method evaluation
 825  */
 826 struct acpi_object_list {
 827         u32 count;
 828         union acpi_object *pointer;
 829 };
 830
 831 /*
 832  * Miscellaneous common Data Structures used by the interfaces
 833  */
 834 #define ACPI_NO_BUFFER              0
 835 #define ACPI_ALLOCATE_BUFFER        (acpi_size) (-1)
 836 #define ACPI_ALLOCATE_LOCAL_BUFFER  (acpi_size) (-2)
 837
 838 struct acpi_buffer {
 839         acpi_size length;       /* Length in bytes of the buffer */
 840         void *pointer;          /* pointer to buffer */
 841 };
 842
 843 /*
 844  * name_type for acpi_get_name
 845  */
 846 #define ACPI_FULL_PATHNAME              0
 847 #define ACPI_SINGLE_NAME                1
 848 #define ACPI_NAME_TYPE_MAX              1
 849
 850 /*
 851  * Predefined Namespace items
 852  */
 853 struct acpi_predefined_names {
 854         char *name;
 855         u8 type;
 856         char *val;
 857 };
 858
 859 /*
 860  * Structure and flags for acpi_get_system_info
 861  */
 862 #define ACPI_SYS_MODE_UNKNOWN           0x0000
 863 #define ACPI_SYS_MODE_ACPI              0x0001
 864 #define ACPI_SYS_MODE_LEGACY            0x0002
 865 #define ACPI_SYS_MODES_MASK             0x0003
 866
 867 /*
 868  * System info returned by acpi_get_system_info()
 869  */
 870 struct acpi_system_info {
 871         u32 acpi_ca_version;
 872         u32 flags;
 873         u32 timer_resolution;
 874         u32 reserved1;
 875         u32 reserved2;
 876         u32 debug_level;
 877         u32 debug_layer;
 878 };
 879
 880 /* Table Event Types */
 881
 882 #define ACPI_TABLE_EVENT_LOAD           0x0
 883 #define ACPI_TABLE_EVENT_UNLOAD         0x1
 884 #define ACPI_NUM_TABLE_EVENTS           2
 885
 886 /*
 887  * Types specific to the OS service interfaces
 888  */
 889 typedef u32(ACPI_SYSTEM_XFACE * acpi_osd_handler) (void *context);
 890
 891 typedef void
 892  (ACPI_SYSTEM_XFACE * acpi_osd_exec_callback) (void *context);
 893
 894 /*
 895  * Various handlers and callback procedures
 896  */
 897 typedef u32(*acpi_event_handler) (void *context);
 898
 899 typedef
 900 void (*acpi_notify_handler) (acpi_handle device, u32 value, void *context);
 901
 902 typedef
 903 void (*acpi_object_handler) (acpi_handle object, void *data);
 904
 905 typedef acpi_status(*acpi_init_handler) (acpi_handle object, u32 function);
 906
 907 #define ACPI_INIT_DEVICE_INI        1
 908
 909 typedef
 910 acpi_status(*acpi_exception_handler) (acpi_status aml_status,
 911                                       acpi_name name,
 912                                       u16 opcode,
 913                                       u32 aml_offset, void *context);
 914
 915 /* Table Event handler (Load, load_table, etc.) and types */
 916
 917 typedef
 918 acpi_status(*acpi_tbl_handler) (u32 event, void *table, void *context);
 919
 920 /* Address Spaces (For Operation Regions) */
 921
 922 typedef
 923 acpi_status(*acpi_adr_space_handler) (u32 function,
 924                                       acpi_physical_address address,
 925                                       u32 bit_width,
 926                                       u64 *value,
 927                                       void *handler_context,
 928                                       void *region_context);
 929
 930 #define ACPI_DEFAULT_HANDLER            NULL
 931
 932 typedef
 933 acpi_status(*acpi_adr_space_setup) (acpi_handle region_handle,
 934                                     u32 function,
 935                                     void *handler_context,
 936                                     void **region_context);
 937
 938 #define ACPI_REGION_ACTIVATE    0
 939 #define ACPI_REGION_DEACTIVATE  1
 940
 941 typedef
 942 acpi_status(*acpi_walk_callback) (acpi_handle object,
 943                                   u32 nesting_level,
 944                                   void *context, void **return_value);
 945
 946 typedef
 947 u32 (*acpi_interface_handler) (acpi_string interface_name, u32 supported);
 948
 949 /* Interrupt handler return values */
 950
 951 #define ACPI_INTERRUPT_NOT_HANDLED      0x00
 952 #define ACPI_INTERRUPT_HANDLED          0x01
 953
 954 /* Length of 32-bit EISAID values when converted back to a string */
 955
 956 #define ACPI_EISAID_STRING_SIZE         8       /* Includes null terminator */
 957
 958 /* Length of UUID (string) values */
 959
 960 #define ACPI_UUID_LENGTH                16
 961
 962 /* Structures used for device/processor HID, UID, CID */
 963
 964 struct acpica_device_id {
 965         u32 length;             /* Length of string + null */
 966         char *string;
 967 };
 968
 969 struct acpica_device_id_list {
 970         u32 count;              /* Number of IDs in Ids array */
 971         u32 list_size;          /* Size of list, including ID strings */
 972         struct acpica_device_id ids[1]; /* ID array */
 973 };
 974
 975 /*
 976  * Structure returned from acpi_get_object_info.
 977  * Optimized for both 32- and 64-bit builds
 978  */
 979 struct acpi_device_info {
 980         u32 info_size;          /* Size of info, including ID strings */
 981         u32 name;               /* ACPI object Name */
 982         acpi_object_type type;  /* ACPI object Type */
 983         u8 param_count;         /* If a method, required parameter count */
 984         u8 valid;               /* Indicates which optional fields are valid */
 985         u8 flags;               /* Miscellaneous info */
 986         u8 highest_dstates[4];  /* _sx_d values: 0xFF indicates not valid */
 987         u8 lowest_dstates[5];   /* _sx_w values: 0xFF indicates not valid */
 988         u32 current_status;     /* _STA value */
 989         u64 address;    /* _ADR value */
 990         struct acpica_device_id hardware_id;    /* _HID value */
 991         struct acpica_device_id unique_id;      /* _UID value */
 992         struct acpica_device_id_list compatible_id_list;        /* _CID list <must be last> */
 993 };
 994
 995 /* Values for Flags field above (acpi_get_object_info) */
 996
 997 #define ACPI_PCI_ROOT_BRIDGE            0x01
 998
 999 /* Flags for Valid field above (acpi_get_object_info) */
1000
1001 #define ACPI_VALID_STA                  0x01
1002 #define ACPI_VALID_ADR                  0x02
1003 #define ACPI_VALID_HID                  0x04
1004 #define ACPI_VALID_UID                  0x08
1005 #define ACPI_VALID_CID                  0x10
1006 #define ACPI_VALID_SXDS                 0x20
1007 #define ACPI_VALID_SXWS                 0x40
1008
1009 /* Flags for _STA method */
1010
1011 #define ACPI_STA_DEVICE_PRESENT         0x01
1012 #define ACPI_STA_DEVICE_ENABLED         0x02
1013 #define ACPI_STA_DEVICE_UI              0x04
1014 #define ACPI_STA_DEVICE_FUNCTIONING     0x08
1015 #define ACPI_STA_DEVICE_OK              0x08    /* Synonym */
1016 #define ACPI_STA_BATTERY_PRESENT        0x10
1017
1018 /* Context structs for address space handlers */
1019
1020 struct acpi_pci_id {
1021         u16 segment;
1022         u16 bus;
1023         u16 device;
1024         u16 function;
1025 };
1026
1027 struct acpi_mem_space_context {
1028         u32 length;
1029         acpi_physical_address address;
1030         acpi_physical_address mapped_physical_address;
1031         u8 *mapped_logical_address;
1032         acpi_size mapped_length;
1033 };
1034
1035 /*
1036  * struct acpi_memory_list is used only if the ACPICA local cache is enabled
1037  */
1038 struct acpi_memory_list {
1039         char *list_name;
1040         void *list_head;
1041         u16 object_size;
1042         u16 max_depth;
1043         u16 current_depth;
1044         u16 link_offset;
1045
1046 #ifdef ACPI_DBG_TRACK_ALLOCATIONS
1047
1048         /* Statistics for debug memory tracking only */
1049
1050         u32 total_allocated;
1051         u32 total_freed;
1052         u32 max_occupied;
1053         u32 total_size;
1054         u32 current_total_size;
1055         u32 requests;
1056         u32 hits;
1057 #endif
1058 };
1059
1060 #endif                          /* __ACTYPES_H__ */