2 * OMAP hardware spinlock driver
4 * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
6 * Contact: Simon Que <sque@ti.com>
7 * Hari Kanigeri <h-kanigeri2@ti.com>
8 * Ohad Ben-Cohen <ohad@wizery.com>
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License
12 * version 2 as published by the Free Software Foundation.
14 * This program is distributed in the hope that it will be useful, but
15 * WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
17 * General Public License for more details.
20 #include <linux/kernel.h>
21 #include <linux/module.h>
22 #include <linux/device.h>
23 #include <linux/delay.h>
25 #include <linux/bitops.h>
26 #include <linux/pm_runtime.h>
27 #include <linux/slab.h>
28 #include <linux/spinlock.h>
29 #include <linux/hwspinlock.h>
30 #include <linux/platform_device.h>
32 #include "hwspinlock_internal.h"
34 /* Spinlock register offsets */
35 #define SYSSTATUS_OFFSET 0x0014
36 #define LOCK_BASE_OFFSET 0x0800
38 #define SPINLOCK_NUMLOCKS_BIT_OFFSET (24)
40 /* Possible values of SPINLOCK_LOCK_REG */
41 #define SPINLOCK_NOTTAKEN (0) /* free */
42 #define SPINLOCK_TAKEN (1) /* locked */
44 #define to_omap_hwspinlock(lock) \
45 container_of(lock, struct omap_hwspinlock, lock)
47 struct omap_hwspinlock
{
48 struct hwspinlock lock
;
52 struct omap_hwspinlock_state
{
53 int num_locks
; /* Total number of locks in system */
54 void __iomem
*io_base
; /* Mapped base address */
57 static int omap_hwspinlock_trylock(struct hwspinlock
*lock
)
59 struct omap_hwspinlock
*omap_lock
= to_omap_hwspinlock(lock
);
61 /* attempt to acquire the lock by reading its value */
62 return (SPINLOCK_NOTTAKEN
== readl(omap_lock
->addr
));
65 static void omap_hwspinlock_unlock(struct hwspinlock
*lock
)
67 struct omap_hwspinlock
*omap_lock
= to_omap_hwspinlock(lock
);
69 /* release the lock by writing 0 to it */
70 writel(SPINLOCK_NOTTAKEN
, omap_lock
->addr
);
74 * relax the OMAP interconnect while spinning on it.
76 * The specs recommended that the retry delay time will be
77 * just over half of the time that a requester would be
78 * expected to hold the lock.
80 * The number below is taken from an hardware specs example,
81 * obviously it is somewhat arbitrary.
83 static void omap_hwspinlock_relax(struct hwspinlock
*lock
)
88 static const struct hwspinlock_ops omap_hwspinlock_ops
= {
89 .trylock
= omap_hwspinlock_trylock
,
90 .unlock
= omap_hwspinlock_unlock
,
91 .relax
= omap_hwspinlock_relax
,
94 static int __devinit
omap_hwspinlock_probe(struct platform_device
*pdev
)
96 struct omap_hwspinlock
*omap_lock
;
97 struct omap_hwspinlock_state
*state
;
98 struct hwspinlock
*lock
;
100 void __iomem
*io_base
;
103 res
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
107 state
= kzalloc(sizeof(*state
), GFP_KERNEL
);
111 io_base
= ioremap(res
->start
, resource_size(res
));
117 /* Determine number of locks */
118 i
= readl(io_base
+ SYSSTATUS_OFFSET
);
119 i
>>= SPINLOCK_NUMLOCKS_BIT_OFFSET
;
121 /* one of the four lsb's must be set, and nothing else */
122 if (hweight_long(i
& 0xf) != 1 || i
> 8) {
127 state
->num_locks
= i
* 32;
128 state
->io_base
= io_base
;
130 platform_set_drvdata(pdev
, state
);
133 * runtime PM will make sure the clock of this module is
134 * enabled iff at least one lock is requested
136 pm_runtime_enable(&pdev
->dev
);
138 for (i
= 0; i
< state
->num_locks
; i
++) {
139 omap_lock
= kzalloc(sizeof(*omap_lock
), GFP_KERNEL
);
145 omap_lock
->lock
.dev
= &pdev
->dev
;
146 omap_lock
->lock
.owner
= THIS_MODULE
;
147 omap_lock
->lock
.id
= i
;
148 omap_lock
->lock
.ops
= &omap_hwspinlock_ops
;
149 omap_lock
->addr
= io_base
+ LOCK_BASE_OFFSET
+ sizeof(u32
) * i
;
151 ret
= hwspin_lock_register(&omap_lock
->lock
);
162 lock
= hwspin_lock_unregister(i
);
163 /* this should't happen, but let's give our best effort */
165 dev_err(&pdev
->dev
, "%s: cleanups failed\n", __func__
);
168 omap_lock
= to_omap_hwspinlock(lock
);
171 pm_runtime_disable(&pdev
->dev
);
179 static int omap_hwspinlock_remove(struct platform_device
*pdev
)
181 struct omap_hwspinlock_state
*state
= platform_get_drvdata(pdev
);
182 struct hwspinlock
*lock
;
183 struct omap_hwspinlock
*omap_lock
;
186 for (i
= 0; i
< state
->num_locks
; i
++) {
187 lock
= hwspin_lock_unregister(i
);
188 /* this shouldn't happen at this point. if it does, at least
189 * don't continue with the remove */
191 dev_err(&pdev
->dev
, "%s: failed on %d\n", __func__
, i
);
195 omap_lock
= to_omap_hwspinlock(lock
);
199 pm_runtime_disable(&pdev
->dev
);
200 iounmap(state
->io_base
);
206 static struct platform_driver omap_hwspinlock_driver
= {
207 .probe
= omap_hwspinlock_probe
,
208 .remove
= omap_hwspinlock_remove
,
210 .name
= "omap_hwspinlock",
214 static int __init
omap_hwspinlock_init(void)
216 return platform_driver_register(&omap_hwspinlock_driver
);
218 /* board init code might need to reserve hwspinlocks for predefined purposes */
219 postcore_initcall(omap_hwspinlock_init
);
221 static void __exit
omap_hwspinlock_exit(void)
223 platform_driver_unregister(&omap_hwspinlock_driver
);
225 module_exit(omap_hwspinlock_exit
);
227 MODULE_LICENSE("GPL v2");
228 MODULE_DESCRIPTION("Hardware spinlock driver for OMAP");
229 MODULE_AUTHOR("Simon Que <sque@ti.com>");
230 MODULE_AUTHOR("Hari Kanigeri <h-kanigeri2@ti.com>");
231 MODULE_AUTHOR("Ohad Ben-Cohen <ohad@wizery.com>");