tuntap: switch to use rtnl_dereference()
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / watchdog / nv_tco.h
blobc2d1d04e055b242889f4751172b214d211199259
1 /*
2 * nv_tco: TCO timer driver for nVidia chipsets.
4 * (c) Copyright 2005 Google Inc., All Rights Reserved.
6 * Supported Chipsets:
7 * - MCP51/MCP55
9 * (c) Copyright 2000 kernel concepts <nils@kernelconcepts.de>, All Rights
10 * Reserved.
11 * http://www.kernelconcepts.de
13 * This program is free software; you can redistribute it and/or
14 * modify it under the terms of the GNU General Public License
15 * as published by the Free Software Foundation; either version
16 * 2 of the License, or (at your option) any later version.
18 * Neither kernel concepts nor Nils Faerber admit liability nor provide
19 * warranty for any of this software. This material is provided
20 * "AS-IS" and at no charge.
22 * (c) Copyright 2000 kernel concepts <nils@kernelconcepts.de>
23 * developed for
24 * Jentro AG, Haar/Munich (Germany)
26 * TCO timer driver for NV chipsets
27 * based on softdog.c by Alan Cox <alan@redhat.com>
31 * Some address definitions for the TCO
34 #define TCO_RLD(base) ((base) + 0x00) /* TCO Timer Reload and Current Value */
35 #define TCO_TMR(base) ((base) + 0x01) /* TCO Timer Initial Value */
37 #define TCO_STS(base) ((base) + 0x04) /* TCO Status Register */
39 * TCO Boot Status bit: set on TCO reset, reset by software or standby
40 * power-good (survives reboots), unfortunately this bit is never
41 * set.
43 # define TCO_STS_BOOT_STS (1 << 9)
45 * first and 2nd timeout status bits, these also survive a warm boot,
46 * and they work, so we use them.
48 # define TCO_STS_TCO_INT_STS (1 << 1)
49 # define TCO_STS_TCO2TO_STS (1 << 10)
50 # define TCO_STS_RESET (TCO_STS_BOOT_STS | TCO_STS_TCO2TO_STS | \
51 TCO_STS_TCO_INT_STS)
53 #define TCO_CNT(base) ((base) + 0x08) /* TCO Control Register */
54 # define TCO_CNT_TCOHALT (1 << 12)
56 #define MCP51_SMBUS_SETUP_B 0xe8
57 # define MCP51_SMBUS_SETUP_B_TCO_REBOOT (1 << 25)
60 * The SMI_EN register is at the base io address + 0x04,
61 * while TCOBASE is + 0x40.
63 #define MCP51_SMI_EN(base) ((base) - 0x40 + 0x04)
64 # define MCP51_SMI_EN_TCO ((1 << 4) | (1 << 5))