USB: ftdi_sio: fix initial baud rate
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / arch / mips / pci / pci-lantiq.c
blob603d7493e9660308cd63e0343c41911a932b5b9c
1 /*
2 * This program is free software; you can redistribute it and/or modify it
3 * under the terms of the GNU General Public License version 2 as published
4 * by the Free Software Foundation.
6 * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
7 */
9 #include <linux/types.h>
10 #include <linux/pci.h>
11 #include <linux/kernel.h>
12 #include <linux/init.h>
13 #include <linux/delay.h>
14 #include <linux/mm.h>
15 #include <linux/vmalloc.h>
16 #include <linux/platform_device.h>
18 #include <asm/pci.h>
19 #include <asm/gpio.h>
20 #include <asm/addrspace.h>
22 #include <lantiq_soc.h>
23 #include <lantiq_irq.h>
24 #include <lantiq_platform.h>
26 #include "pci-lantiq.h"
28 #define LTQ_PCI_CFG_BASE 0x17000000
29 #define LTQ_PCI_CFG_SIZE 0x00008000
30 #define LTQ_PCI_MEM_BASE 0x18000000
31 #define LTQ_PCI_MEM_SIZE 0x02000000
32 #define LTQ_PCI_IO_BASE 0x1AE00000
33 #define LTQ_PCI_IO_SIZE 0x00200000
35 #define PCI_CR_FCI_ADDR_MAP0 0x00C0
36 #define PCI_CR_FCI_ADDR_MAP1 0x00C4
37 #define PCI_CR_FCI_ADDR_MAP2 0x00C8
38 #define PCI_CR_FCI_ADDR_MAP3 0x00CC
39 #define PCI_CR_FCI_ADDR_MAP4 0x00D0
40 #define PCI_CR_FCI_ADDR_MAP5 0x00D4
41 #define PCI_CR_FCI_ADDR_MAP6 0x00D8
42 #define PCI_CR_FCI_ADDR_MAP7 0x00DC
43 #define PCI_CR_CLK_CTRL 0x0000
44 #define PCI_CR_PCI_MOD 0x0030
45 #define PCI_CR_PC_ARB 0x0080
46 #define PCI_CR_FCI_ADDR_MAP11hg 0x00E4
47 #define PCI_CR_BAR11MASK 0x0044
48 #define PCI_CR_BAR12MASK 0x0048
49 #define PCI_CR_BAR13MASK 0x004C
50 #define PCI_CS_BASE_ADDR1 0x0010
51 #define PCI_CR_PCI_ADDR_MAP11 0x0064
52 #define PCI_CR_FCI_BURST_LENGTH 0x00E8
53 #define PCI_CR_PCI_EOI 0x002C
54 #define PCI_CS_STS_CMD 0x0004
56 #define PCI_MASTER0_REQ_MASK_2BITS 8
57 #define PCI_MASTER1_REQ_MASK_2BITS 10
58 #define PCI_MASTER2_REQ_MASK_2BITS 12
59 #define INTERNAL_ARB_ENABLE_BIT 0
61 #define LTQ_CGU_IFCCR 0x0018
62 #define LTQ_CGU_PCICR 0x0034
64 #define ltq_pci_w32(x, y) ltq_w32((x), ltq_pci_membase + (y))
65 #define ltq_pci_r32(x) ltq_r32(ltq_pci_membase + (x))
67 #define ltq_pci_cfg_w32(x, y) ltq_w32((x), ltq_pci_mapped_cfg + (y))
68 #define ltq_pci_cfg_r32(x) ltq_r32(ltq_pci_mapped_cfg + (x))
70 struct ltq_pci_gpio_map {
71 int pin;
72 int alt0;
73 int alt1;
74 int dir;
75 char *name;
78 /* the pci core can make use of the following gpios */
79 static struct ltq_pci_gpio_map ltq_pci_gpio_map[] = {
80 { 0, 1, 0, 0, "pci-exin0" },
81 { 1, 1, 0, 0, "pci-exin1" },
82 { 2, 1, 0, 0, "pci-exin2" },
83 { 39, 1, 0, 0, "pci-exin3" },
84 { 10, 1, 0, 0, "pci-exin4" },
85 { 9, 1, 0, 0, "pci-exin5" },
86 { 30, 1, 0, 1, "pci-gnt1" },
87 { 23, 1, 0, 1, "pci-gnt2" },
88 { 19, 1, 0, 1, "pci-gnt3" },
89 { 38, 1, 0, 1, "pci-gnt4" },
90 { 29, 1, 0, 0, "pci-req1" },
91 { 31, 1, 0, 0, "pci-req2" },
92 { 3, 1, 0, 0, "pci-req3" },
93 { 37, 1, 0, 0, "pci-req4" },
96 __iomem void *ltq_pci_mapped_cfg;
97 static __iomem void *ltq_pci_membase;
99 int (*ltqpci_plat_dev_init)(struct pci_dev *dev) = NULL;
101 /* Since the PCI REQ pins can be reused for other functionality, make it
102 possible to exclude those from interpretation by the PCI controller */
103 static int ltq_pci_req_mask = 0xf;
105 static int *ltq_pci_irq_map;
107 struct pci_ops ltq_pci_ops = {
108 .read = ltq_pci_read_config_dword,
109 .write = ltq_pci_write_config_dword
112 static struct resource pci_io_resource = {
113 .name = "pci io space",
114 .start = LTQ_PCI_IO_BASE,
115 .end = LTQ_PCI_IO_BASE + LTQ_PCI_IO_SIZE - 1,
116 .flags = IORESOURCE_IO
119 static struct resource pci_mem_resource = {
120 .name = "pci memory space",
121 .start = LTQ_PCI_MEM_BASE,
122 .end = LTQ_PCI_MEM_BASE + LTQ_PCI_MEM_SIZE - 1,
123 .flags = IORESOURCE_MEM
126 static struct pci_controller ltq_pci_controller = {
127 .pci_ops = &ltq_pci_ops,
128 .mem_resource = &pci_mem_resource,
129 .mem_offset = 0x00000000UL,
130 .io_resource = &pci_io_resource,
131 .io_offset = 0x00000000UL,
134 int pcibios_plat_dev_init(struct pci_dev *dev)
136 if (ltqpci_plat_dev_init)
137 return ltqpci_plat_dev_init(dev);
139 return 0;
142 static u32 ltq_calc_bar11mask(void)
144 u32 mem, bar11mask;
146 /* BAR11MASK value depends on available memory on system. */
147 mem = num_physpages * PAGE_SIZE;
148 bar11mask = (0x0ffffff0 & ~((1 << (fls(mem) - 1)) - 1)) | 8;
150 return bar11mask;
153 static void ltq_pci_setup_gpio(int gpio)
155 int i;
156 for (i = 0; i < ARRAY_SIZE(ltq_pci_gpio_map); i++) {
157 if (gpio & (1 << i)) {
158 ltq_gpio_request(ltq_pci_gpio_map[i].pin,
159 ltq_pci_gpio_map[i].alt0,
160 ltq_pci_gpio_map[i].alt1,
161 ltq_pci_gpio_map[i].dir,
162 ltq_pci_gpio_map[i].name);
165 ltq_gpio_request(21, 0, 0, 1, "pci-reset");
166 ltq_pci_req_mask = (gpio >> PCI_REQ_SHIFT) & PCI_REQ_MASK;
169 static int __devinit ltq_pci_startup(struct ltq_pci_data *conf)
171 u32 temp_buffer;
173 /* set clock to 33Mhz */
174 ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) & ~0xf00000, LTQ_CGU_IFCCR);
175 ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | 0x800000, LTQ_CGU_IFCCR);
177 /* external or internal clock ? */
178 if (conf->clock) {
179 ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) & ~(1 << 16),
180 LTQ_CGU_IFCCR);
181 ltq_cgu_w32((1 << 30), LTQ_CGU_PCICR);
182 } else {
183 ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | (1 << 16),
184 LTQ_CGU_IFCCR);
185 ltq_cgu_w32((1 << 31) | (1 << 30), LTQ_CGU_PCICR);
188 /* setup pci clock and gpis used by pci */
189 ltq_pci_setup_gpio(conf->gpio);
191 /* enable auto-switching between PCI and EBU */
192 ltq_pci_w32(0xa, PCI_CR_CLK_CTRL);
194 /* busy, i.e. configuration is not done, PCI access has to be retried */
195 ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) & ~(1 << 24), PCI_CR_PCI_MOD);
196 wmb();
197 /* BUS Master/IO/MEM access */
198 ltq_pci_cfg_w32(ltq_pci_cfg_r32(PCI_CS_STS_CMD) | 7, PCI_CS_STS_CMD);
200 /* enable external 2 PCI masters */
201 temp_buffer = ltq_pci_r32(PCI_CR_PC_ARB);
202 temp_buffer &= (~(ltq_pci_req_mask << 16));
203 /* enable internal arbiter */
204 temp_buffer |= (1 << INTERNAL_ARB_ENABLE_BIT);
205 /* enable internal PCI master reqest */
206 temp_buffer &= (~(3 << PCI_MASTER0_REQ_MASK_2BITS));
208 /* enable EBU request */
209 temp_buffer &= (~(3 << PCI_MASTER1_REQ_MASK_2BITS));
211 /* enable all external masters request */
212 temp_buffer &= (~(3 << PCI_MASTER2_REQ_MASK_2BITS));
213 ltq_pci_w32(temp_buffer, PCI_CR_PC_ARB);
214 wmb();
216 /* setup BAR memory regions */
217 ltq_pci_w32(0x18000000, PCI_CR_FCI_ADDR_MAP0);
218 ltq_pci_w32(0x18400000, PCI_CR_FCI_ADDR_MAP1);
219 ltq_pci_w32(0x18800000, PCI_CR_FCI_ADDR_MAP2);
220 ltq_pci_w32(0x18c00000, PCI_CR_FCI_ADDR_MAP3);
221 ltq_pci_w32(0x19000000, PCI_CR_FCI_ADDR_MAP4);
222 ltq_pci_w32(0x19400000, PCI_CR_FCI_ADDR_MAP5);
223 ltq_pci_w32(0x19800000, PCI_CR_FCI_ADDR_MAP6);
224 ltq_pci_w32(0x19c00000, PCI_CR_FCI_ADDR_MAP7);
225 ltq_pci_w32(0x1ae00000, PCI_CR_FCI_ADDR_MAP11hg);
226 ltq_pci_w32(ltq_calc_bar11mask(), PCI_CR_BAR11MASK);
227 ltq_pci_w32(0, PCI_CR_PCI_ADDR_MAP11);
228 ltq_pci_w32(0, PCI_CS_BASE_ADDR1);
229 /* both TX and RX endian swap are enabled */
230 ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_EOI) | 3, PCI_CR_PCI_EOI);
231 wmb();
232 ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR12MASK) | 0x80000000,
233 PCI_CR_BAR12MASK);
234 ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR13MASK) | 0x80000000,
235 PCI_CR_BAR13MASK);
236 /*use 8 dw burst length */
237 ltq_pci_w32(0x303, PCI_CR_FCI_BURST_LENGTH);
238 ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) | (1 << 24), PCI_CR_PCI_MOD);
239 wmb();
241 /* setup irq line */
242 ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_CON) | 0xc, LTQ_EBU_PCC_CON);
243 ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_IEN) | 0x10, LTQ_EBU_PCC_IEN);
245 /* toggle reset pin */
246 __gpio_set_value(21, 0);
247 wmb();
248 mdelay(1);
249 __gpio_set_value(21, 1);
250 return 0;
253 int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
255 if (ltq_pci_irq_map[slot])
256 return ltq_pci_irq_map[slot];
257 printk(KERN_ERR "lq_pci: trying to map irq for unknown slot %d\n",
258 slot);
260 return 0;
263 static int __devinit ltq_pci_probe(struct platform_device *pdev)
265 struct ltq_pci_data *ltq_pci_data =
266 (struct ltq_pci_data *) pdev->dev.platform_data;
267 pci_probe_only = 0;
268 ltq_pci_irq_map = ltq_pci_data->irq;
269 ltq_pci_membase = ioremap_nocache(PCI_CR_BASE_ADDR, PCI_CR_SIZE);
270 ltq_pci_mapped_cfg =
271 ioremap_nocache(LTQ_PCI_CFG_BASE, LTQ_PCI_CFG_BASE);
272 ltq_pci_controller.io_map_base =
273 (unsigned long)ioremap(LTQ_PCI_IO_BASE, LTQ_PCI_IO_SIZE - 1);
274 ltq_pci_startup(ltq_pci_data);
275 register_pci_controller(&ltq_pci_controller);
277 return 0;
280 static struct platform_driver
281 ltq_pci_driver = {
282 .probe = ltq_pci_probe,
283 .driver = {
284 .name = "ltq_pci",
285 .owner = THIS_MODULE,
289 int __init pcibios_init(void)
291 int ret = platform_driver_register(&ltq_pci_driver);
292 if (ret)
293 printk(KERN_INFO "ltq_pci: Error registering platfom driver!");
294 return ret;
297 arch_initcall(pcibios_init);