arch/x86/kernel/irqinit.c

   1 #include <linux/linkage.h>
   2 #include <linux/errno.h>
   3 #include <linux/signal.h>
   4 #include <linux/sched.h>
   5 #include <linux/ioport.h>
   6 #include <linux/interrupt.h>
   7 #include <linux/timex.h>
   8 #include <linux/random.h>
   9 #include <linux/kprobes.h>
  10 #include <linux/init.h>
  11 #include <linux/kernel_stat.h>
  12 #include <linux/sysdev.h>
  13 #include <linux/bitops.h>
  14 #include <linux/acpi.h>
  15 #include <linux/io.h>
  16 #include <linux/delay.h>
  17
  18 #include <asm/atomic.h>
  19 #include <asm/system.h>
  20 #include <asm/timer.h>
  21 #include <asm/hw_irq.h>
  22 #include <asm/pgtable.h>
  23 #include <asm/desc.h>
  24 #include <asm/apic.h>
  25 #include <asm/setup.h>
  26 #include <asm/i8259.h>
  27 #include <asm/traps.h>
  28
  29 /*
  30  * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts:
  31  * (these are usually mapped to vectors 0x30-0x3f)
  32  */
  33
  34 /*
  35  * The IO-APIC gives us many more interrupt sources. Most of these
  36  * are unused but an SMP system is supposed to have enough memory ...
  37  * sometimes (mostly wrt. hw bugs) we get corrupted vectors all
  38  * across the spectrum, so we really want to be prepared to get all
  39  * of these. Plus, more powerful systems might have more than 64
  40  * IO-APIC registers.
  41  *
  42  * (these are usually mapped into the 0x30-0xff vector range)
  43  */
  44
  45 #ifdef CONFIG_X86_32
  46 /*
  47  * Note that on a 486, we don't want to do a SIGFPE on an irq13
  48  * as the irq is unreliable, and exception 16 works correctly
  49  * (ie as explained in the intel literature). On a 386, you
  50  * can't use exception 16 due to bad IBM design, so we have to
  51  * rely on the less exact irq13.
  52  *
  53  * Careful.. Not only is IRQ13 unreliable, but it is also
  54  * leads to races. IBM designers who came up with it should
  55  * be shot.
  56  */
  57
  58 static irqreturn_t math_error_irq(int cpl, void *dev_id)
  59 {
  60         outb(0, 0xF0);
  61         if (ignore_fpu_irq || !boot_cpu_data.hard_math)
  62                 return IRQ_NONE;
  63         math_error(get_irq_regs(), 0, 16);
  64         return IRQ_HANDLED;
  65 }
  66
  67 /*
  68  * New motherboards sometimes make IRQ 13 be a PCI interrupt,
  69  * so allow interrupt sharing.
  70  */
  71 static struct irqaction fpu_irq = {
  72         .handler = math_error_irq,
  73         .name = "fpu",
  74 };
  75 #endif
  76
  77 /*
  78  * IRQ2 is cascade interrupt to second interrupt controller
  79  */
  80 static struct irqaction irq2 = {
  81         .handler = no_action,
  82         .name = "cascade",
  83 };
  84
  85 DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
  86         [0 ... NR_VECTORS - 1] = -1,
  87 };
  88
  89 int vector_used_by_percpu_irq(unsigned int vector)
  90 {
  91         int cpu;
  92
  93         for_each_online_cpu(cpu) {
  94                 if (per_cpu(vector_irq, cpu)[vector] != -1)
  95                         return 1;
  96         }
  97
  98         return 0;
  99 }
 100
 101 void __init init_ISA_irqs(void)
 102 {
 103         struct irq_chip *chip = legacy_pic->chip;
 104         const char *name = chip->name;
 105         int i;
 106
 107 #if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)
 108         init_bsp_APIC();
 109 #endif
 110         legacy_pic->init(0);
 111
 112         for (i = 0; i < legacy_pic->nr_legacy_irqs; i++)
 113                 set_irq_chip_and_handler_name(i, chip, handle_level_irq, name);
 114 }
 115
 116 void __init init_IRQ(void)
 117 {
 118         int i;
 119
 120         /*
 121          * On cpu 0, Assign IRQ0_VECTOR..IRQ15_VECTOR's to IRQ 0..15.
 122          * If these IRQ's are handled by legacy interrupt-controllers like PIC,
 123          * then this configuration will likely be static after the boot. If
 124          * these IRQ's are handled by more mordern controllers like IO-APIC,
 125          * then this vector space can be freed and re-used dynamically as the
 126          * irq's migrate etc.
 127          */
 128         for (i = 0; i < legacy_pic->nr_legacy_irqs; i++)
 129                 per_cpu(vector_irq, 0)[IRQ0_VECTOR + i] = i;
 130
 131         x86_init.irqs.intr_init();
 132 }
 133
 134 /*
 135  * Setup the vector to irq mappings.
 136  */
 137 void setup_vector_irq(int cpu)
 138 {
 139 #ifndef CONFIG_X86_IO_APIC
 140         int irq;
 141
 142         /*
 143          * On most of the platforms, legacy PIC delivers the interrupts on the
 144          * boot cpu. But there are certain platforms where PIC interrupts are
 145          * delivered to multiple cpu's. If the legacy IRQ is handled by the
 146          * legacy PIC, for the new cpu that is coming online, setup the static
 147          * legacy vector to irq mapping:
 148          */
 149         for (irq = 0; irq < legacy_pic->nr_legacy_irqs; irq++)
 150                 per_cpu(vector_irq, cpu)[IRQ0_VECTOR + irq] = irq;
 151 #endif
 152
 153         __setup_vector_irq(cpu);
 154 }
 155
 156 static void __init smp_intr_init(void)
 157 {
 158 #ifdef CONFIG_SMP
 159 #if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)
 160         /*
 161          * The reschedule interrupt is a CPU-to-CPU reschedule-helper
 162          * IPI, driven by wakeup.
 163          */
 164         alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
 165
 166         /* IPIs for invalidation */
 167         alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0);
 168         alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1);
 169         alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2);
 170         alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3);
 171         alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4);
 172         alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5);
 173         alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6);
 174         alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7);
 175
 176         /* IPI for generic function call */
 177         alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
 178
 179         /* IPI for generic single function call */
 180         alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR,
 181                         call_function_single_interrupt);
 182
 183         /* Low priority IPI to cleanup after moving an irq */
 184         set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt);
 185         set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors);
 186
 187         /* IPI used for rebooting/stopping */
 188         alloc_intr_gate(REBOOT_VECTOR, reboot_interrupt);
 189 #endif
 190 #endif /* CONFIG_SMP */
 191 }
 192
 193 static void __init apic_intr_init(void)
 194 {
 195         smp_intr_init();
 196
 197 #ifdef CONFIG_X86_THERMAL_VECTOR
 198         alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
 199 #endif
 200 #ifdef CONFIG_X86_MCE_THRESHOLD
 201         alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
 202 #endif
 203 #if defined(CONFIG_X86_MCE) && defined(CONFIG_X86_LOCAL_APIC)
 204         alloc_intr_gate(MCE_SELF_VECTOR, mce_self_interrupt);
 205 #endif
 206
 207 #if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)
 208         /* self generated IPI for local APIC timer */
 209         alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
 210
 211         /* IPI for X86 platform specific use */
 212         alloc_intr_gate(X86_PLATFORM_IPI_VECTOR, x86_platform_ipi);
 213
 214         /* IPI vectors for APIC spurious and error interrupts */
 215         alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
 216         alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
 217
 218         /* IRQ work interrupts: */
 219 # ifdef CONFIG_IRQ_WORK
 220         alloc_intr_gate(IRQ_WORK_VECTOR, irq_work_interrupt);
 221 # endif
 222
 223 #endif
 224 }
 225
 226 void __init native_init_IRQ(void)
 227 {
 228         int i;
 229
 230         /* Execute any quirks before the call gates are initialised: */
 231         x86_init.irqs.pre_vector_init();
 232
 233         apic_intr_init();
 234
 235         /*
 236          * Cover the whole vector space, no vector can escape
 237          * us. (some of these will be overridden and become
 238          * 'special' SMP interrupts)
 239          */
 240         for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) {
 241                 /* IA32_SYSCALL_VECTOR could be used in trap_init already. */
 242                 if (!test_bit(i, used_vectors))
 243                         set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]);
 244         }
 245
 246         if (!acpi_ioapic)
 247                 setup_irq(2, &irq2);
 248
 249 #ifdef CONFIG_X86_32
 250         /*
 251          * External FPU? Set up irq13 if so, for
 252          * original braindamaged IBM FERR coupling.
 253          */
 254         if (boot_cpu_data.hard_math && !cpu_has_fpu)
 255                 setup_irq(FPU_IRQ, &fpu_irq);
 256
 257         irq_ctx_init(smp_processor_id());
 258 #endif
 259 }