drivers/ata/sata_sis.c

   1 /*
   2  *  sata_sis.c - Silicon Integrated Systems SATA
   3  *
   4  *  Maintained by:  Uwe Koziolek
   5  *                  Please ALWAYS copy linux-ide@vger.kernel.org
   6  *                  on emails.
   7  *
   8  *  Copyright 2004 Uwe Koziolek
   9  *
  10  *
  11  *  This program is free software; you can redistribute it and/or modify
  12  *  it under the terms of the GNU General Public License as published by
  13  *  the Free Software Foundation; either version 2, or (at your option)
  14  *  any later version.
  15  *
  16  *  This program is distributed in the hope that it will be useful,
  17  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  *  GNU General Public License for more details.
  20  *
  21  *  You should have received a copy of the GNU General Public License
  22  *  along with this program; see the file COPYING.  If not, write to
  23  *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  24  *
  25  *
  26  *  libata documentation is available via 'make {ps|pdf}docs',
  27  *  as Documentation/DocBook/libata.*
  28  *
  29  *  Hardware documentation available under NDA.
  30  *
  31  */
  32
  33 #include <linux/kernel.h>
  34 #include <linux/module.h>
  35 #include <linux/pci.h>
  36 #include <linux/init.h>
  37 #include <linux/blkdev.h>
  38 #include <linux/delay.h>
  39 #include <linux/interrupt.h>
  40 #include <linux/device.h>
  41 #include <scsi/scsi_host.h>
  42 #include <linux/libata.h>
  43 #include "sis.h"
  44
  45 #define DRV_NAME        "sata_sis"
  46 #define DRV_VERSION     "1.0"
  47
  48 enum {
  49         sis_180                 = 0,
  50         SIS_SCR_PCI_BAR         = 5,
  51
  52         /* PCI configuration registers */
  53         SIS_GENCTL              = 0x54, /* IDE General Control register */
  54         SIS_SCR_BASE            = 0xc0, /* sata0 phy SCR registers */
  55         SIS180_SATA1_OFS        = 0x10, /* offset from sata0->sata1 phy regs */
  56         SIS182_SATA1_OFS        = 0x20, /* offset from sata0->sata1 phy regs */
  57         SIS_PMR                 = 0x90, /* port mapping register */
  58         SIS_PMR_COMBINED        = 0x30,
  59
  60         /* random bits */
  61         SIS_FLAG_CFGSCR         = (1 << 30), /* host flag: SCRs via PCI cfg */
  62
  63         GENCTL_IOMAPPED_SCR     = (1 << 26), /* if set, SCRs are in IO space */
  64 };
  65
  66 static int sis_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
  67 static int sis_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
  68 static int sis_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
  69
  70 static const struct pci_device_id sis_pci_tbl[] = {
  71         { PCI_VDEVICE(SI, 0x0180), sis_180 },   /* SiS 964/180 */
  72         { PCI_VDEVICE(SI, 0x0181), sis_180 },   /* SiS 964/180 */
  73         { PCI_VDEVICE(SI, 0x0182), sis_180 },   /* SiS 965/965L */
  74         { PCI_VDEVICE(SI, 0x0183), sis_180 },   /* SiS 965/965L */
  75         { PCI_VDEVICE(SI, 0x1182), sis_180 },   /* SiS 966/680 */
  76         { PCI_VDEVICE(SI, 0x1183), sis_180 },   /* SiS 966/966L/968/680 */
  77
  78         { }     /* terminate list */
  79 };
  80
  81 static struct pci_driver sis_pci_driver = {
  82         .name                   = DRV_NAME,
  83         .id_table               = sis_pci_tbl,
  84         .probe                  = sis_init_one,
  85         .remove                 = ata_pci_remove_one,
  86 };
  87
  88 static struct scsi_host_template sis_sht = {
  89         ATA_BMDMA_SHT(DRV_NAME),
  90 };
  91
  92 static struct ata_port_operations sis_ops = {
  93         .inherits               = &ata_bmdma_port_ops,
  94         .scr_read               = sis_scr_read,
  95         .scr_write              = sis_scr_write,
  96 };
  97
  98 static const struct ata_port_info sis_port_info = {
  99         .flags          = ATA_FLAG_SATA,
 100         .pio_mask       = ATA_PIO4,
 101         .mwdma_mask     = ATA_MWDMA2,
 102         .udma_mask      = ATA_UDMA6,
 103         .port_ops       = &sis_ops,
 104 };
 105
 106 MODULE_AUTHOR("Uwe Koziolek");
 107 MODULE_DESCRIPTION("low-level driver for Silicon Integrated Systems SATA controller");
 108 MODULE_LICENSE("GPL");
 109 MODULE_DEVICE_TABLE(pci, sis_pci_tbl);
 110 MODULE_VERSION(DRV_VERSION);
 111
 112 static unsigned int get_scr_cfg_addr(struct ata_link *link, unsigned int sc_reg)
 113 {
 114         struct ata_port *ap = link->ap;
 115         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 116         unsigned int addr = SIS_SCR_BASE + (4 * sc_reg);
 117         u8 pmr;
 118
 119         if (ap->port_no)  {
 120                 switch (pdev->device) {
 121                 case 0x0180:
 122                 case 0x0181:
 123                         pci_read_config_byte(pdev, SIS_PMR, &pmr);
 124                         if ((pmr & SIS_PMR_COMBINED) == 0)
 125                                 addr += SIS180_SATA1_OFS;
 126                         break;
 127
 128                 case 0x0182:
 129                 case 0x0183:
 130                 case 0x1182:
 131                         addr += SIS182_SATA1_OFS;
 132                         break;
 133                 }
 134         }
 135         if (link->pmp)
 136                 addr += 0x10;
 137
 138         return addr;
 139 }
 140
 141 static u32 sis_scr_cfg_read(struct ata_link *link,
 142                             unsigned int sc_reg, u32 *val)
 143 {
 144         struct pci_dev *pdev = to_pci_dev(link->ap->host->dev);
 145         unsigned int cfg_addr = get_scr_cfg_addr(link, sc_reg);
 146
 147         if (sc_reg == SCR_ERROR) /* doesn't exist in PCI cfg space */
 148                 return -EINVAL;
 149
 150         pci_read_config_dword(pdev, cfg_addr, val);
 151         return 0;
 152 }
 153
 154 static int sis_scr_cfg_write(struct ata_link *link,
 155                              unsigned int sc_reg, u32 val)
 156 {
 157         struct pci_dev *pdev = to_pci_dev(link->ap->host->dev);
 158         unsigned int cfg_addr = get_scr_cfg_addr(link, sc_reg);
 159
 160         pci_write_config_dword(pdev, cfg_addr, val);
 161         return 0;
 162 }
 163
 164 static int sis_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val)
 165 {
 166         struct ata_port *ap = link->ap;
 167         void __iomem *base = ap->ioaddr.scr_addr + link->pmp * 0x10;
 168
 169         if (sc_reg > SCR_CONTROL)
 170                 return -EINVAL;
 171
 172         if (ap->flags & SIS_FLAG_CFGSCR)
 173                 return sis_scr_cfg_read(link, sc_reg, val);
 174
 175         *val = ioread32(base + sc_reg * 4);
 176         return 0;
 177 }
 178
 179 static int sis_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
 180 {
 181         struct ata_port *ap = link->ap;
 182         void __iomem *base = ap->ioaddr.scr_addr + link->pmp * 0x10;
 183
 184         if (sc_reg > SCR_CONTROL)
 185                 return -EINVAL;
 186
 187         if (ap->flags & SIS_FLAG_CFGSCR)
 188                 return sis_scr_cfg_write(link, sc_reg, val);
 189
 190         iowrite32(val, base + (sc_reg * 4));
 191         return 0;
 192 }
 193
 194 static int sis_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 195 {
 196         struct ata_port_info pi = sis_port_info;
 197         const struct ata_port_info *ppi[] = { &pi, &pi };
 198         struct ata_host *host;
 199         u32 genctl, val;
 200         u8 pmr;
 201         u8 port2_start = 0x20;
 202         int i, rc;
 203
 204         ata_print_version_once(&pdev->dev, DRV_VERSION);
 205
 206         rc = pcim_enable_device(pdev);
 207         if (rc)
 208                 return rc;
 209
 210         /* check and see if the SCRs are in IO space or PCI cfg space */
 211         pci_read_config_dword(pdev, SIS_GENCTL, &genctl);
 212         if ((genctl & GENCTL_IOMAPPED_SCR) == 0)
 213                 pi.flags |= SIS_FLAG_CFGSCR;
 214
 215         /* if hardware thinks SCRs are in IO space, but there are
 216          * no IO resources assigned, change to PCI cfg space.
 217          */
 218         if ((!(pi.flags & SIS_FLAG_CFGSCR)) &&
 219             ((pci_resource_start(pdev, SIS_SCR_PCI_BAR) == 0) ||
 220              (pci_resource_len(pdev, SIS_SCR_PCI_BAR) < 128))) {
 221                 genctl &= ~GENCTL_IOMAPPED_SCR;
 222                 pci_write_config_dword(pdev, SIS_GENCTL, genctl);
 223                 pi.flags |= SIS_FLAG_CFGSCR;
 224         }
 225
 226         pci_read_config_byte(pdev, SIS_PMR, &pmr);
 227         switch (ent->device) {
 228         case 0x0180:
 229         case 0x0181:
 230
 231                 /* The PATA-handling is provided by pata_sis */
 232                 switch (pmr & 0x30) {
 233                 case 0x10:
 234                         ppi[1] = &sis_info133_for_sata;
 235                         break;
 236
 237                 case 0x30:
 238                         ppi[0] = &sis_info133_for_sata;
 239                         break;
 240                 }
 241                 if ((pmr & SIS_PMR_COMBINED) == 0) {
 242                         dev_info(&pdev->dev,
 243                                  "Detected SiS 180/181/964 chipset in SATA mode\n");
 244                         port2_start = 64;
 245                 } else {
 246                         dev_info(&pdev->dev,
 247                                  "Detected SiS 180/181 chipset in combined mode\n");
 248                         port2_start = 0;
 249                         pi.flags |= ATA_FLAG_SLAVE_POSS;
 250                 }
 251                 break;
 252
 253         case 0x0182:
 254         case 0x0183:
 255                 pci_read_config_dword(pdev, 0x6C, &val);
 256                 if (val & (1L << 31)) {
 257                         dev_info(&pdev->dev, "Detected SiS 182/965 chipset\n");
 258                         pi.flags |= ATA_FLAG_SLAVE_POSS;
 259                 } else {
 260                         dev_info(&pdev->dev, "Detected SiS 182/965L chipset\n");
 261                 }
 262                 break;
 263
 264         case 0x1182:
 265                 dev_info(&pdev->dev,
 266                          "Detected SiS 1182/966/680 SATA controller\n");
 267                 pi.flags |= ATA_FLAG_SLAVE_POSS;
 268                 break;
 269
 270         case 0x1183:
 271                 dev_info(&pdev->dev,
 272                          "Detected SiS 1183/966/966L/968/680 controller in PATA mode\n");
 273                 ppi[0] = &sis_info133_for_sata;
 274                 ppi[1] = &sis_info133_for_sata;
 275                 break;
 276         }
 277
 278         rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
 279         if (rc)
 280                 return rc;
 281
 282         for (i = 0; i < 2; i++) {
 283                 struct ata_port *ap = host->ports[i];
 284
 285                 if (ap->flags & ATA_FLAG_SATA &&
 286                     ap->flags & ATA_FLAG_SLAVE_POSS) {
 287                         rc = ata_slave_link_init(ap);
 288                         if (rc)
 289                                 return rc;
 290                 }
 291         }
 292
 293         if (!(pi.flags & SIS_FLAG_CFGSCR)) {
 294                 void __iomem *mmio;
 295
 296                 rc = pcim_iomap_regions(pdev, 1 << SIS_SCR_PCI_BAR, DRV_NAME);
 297                 if (rc)
 298                         return rc;
 299                 mmio = host->iomap[SIS_SCR_PCI_BAR];
 300
 301                 host->ports[0]->ioaddr.scr_addr = mmio;
 302                 host->ports[1]->ioaddr.scr_addr = mmio + port2_start;
 303         }
 304
 305         pci_set_master(pdev);
 306         pci_intx(pdev, 1);
 307         return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
 308                                  IRQF_SHARED, &sis_sht);
 309 }
 310
 311 static int __init sis_init(void)
 312 {
 313         return pci_register_driver(&sis_pci_driver);
 314 }
 315
 316 static void __exit sis_exit(void)
 317 {
 318         pci_unregister_driver(&sis_pci_driver);
 319 }
 320
 321 module_init(sis_init);
 322 module_exit(sis_exit);