arch/arm/mach-pxa/pxa3xx-ulpi.c

   1 /*
   2  * linux/arch/arm/mach-pxa/pxa3xx-ulpi.c
   3  *
   4  * code specific to pxa3xx aka Monahans
   5  *
   6  * Copyright (C) 2010 CompuLab Ltd.
   7  *
   8  * 2010-13-07: Igor Grinberg <grinberg@compulab.co.il>
   9  *             initial version: pxa310 USB Host mode support
  10  *
  11  * This program is free software; you can redistribute it and/or modify
  12  * it under the terms of the GNU General Public License version 2 as
  13  * published by the Free Software Foundation.
  14  */
  15
  16 #include <linux/module.h>
  17 #include <linux/kernel.h>
  18 #include <linux/slab.h>
  19 #include <linux/device.h>
  20 #include <linux/platform_device.h>
  21 #include <linux/err.h>
  22 #include <linux/io.h>
  23 #include <linux/delay.h>
  24 #include <linux/clk.h>
  25 #include <linux/usb.h>
  26 #include <linux/usb/otg.h>
  27
  28 #include <mach/hardware.h>
  29 #include <mach/regs-u2d.h>
  30 #include <mach/pxa3xx-u2d.h>
  31
  32 struct pxa3xx_u2d_ulpi {
  33         struct clk              *clk;
  34         void __iomem            *mmio_base;
  35
  36         struct otg_transceiver  *otg;
  37         unsigned int            ulpi_mode;
  38 };
  39
  40 static struct pxa3xx_u2d_ulpi *u2d;
  41
  42 static inline u32 u2d_readl(u32 reg)
  43 {
  44         return __raw_readl(u2d->mmio_base + reg);
  45 }
  46
  47 static inline void u2d_writel(u32 reg, u32 val)
  48 {
  49         __raw_writel(val, u2d->mmio_base + reg);
  50 }
  51
  52 #if defined(CONFIG_PXA310_ULPI)
  53 enum u2d_ulpi_phy_mode {
  54         SYNCH           = 0,
  55         CARKIT          = (1 << 0),
  56         SER_3PIN        = (1 << 1),
  57         SER_6PIN        = (1 << 2),
  58         LOWPOWER        = (1 << 3),
  59 };
  60
  61 static inline enum u2d_ulpi_phy_mode pxa310_ulpi_get_phymode(void)
  62 {
  63         return (u2d_readl(U2DOTGUSR) >> 28) & 0xF;
  64 }
  65
  66 static int pxa310_ulpi_poll(void)
  67 {
  68         int timeout = 50000;
  69
  70         while (timeout--) {
  71                 if (!(u2d_readl(U2DOTGUCR) & U2DOTGUCR_RUN))
  72                         return 0;
  73
  74                 cpu_relax();
  75         }
  76
  77         pr_warning("%s: ULPI access timed out!\n", __func__);
  78
  79         return -ETIMEDOUT;
  80 }
  81
  82 static int pxa310_ulpi_read(struct otg_transceiver *otg, u32 reg)
  83 {
  84         int err;
  85
  86         if (pxa310_ulpi_get_phymode() != SYNCH) {
  87                 pr_warning("%s: PHY is not in SYNCH mode!\n", __func__);
  88                 return -EBUSY;
  89         }
  90
  91         u2d_writel(U2DOTGUCR, U2DOTGUCR_RUN | U2DOTGUCR_RNW | (reg << 16));
  92         msleep(5);
  93
  94         err = pxa310_ulpi_poll();
  95         if (err)
  96                 return err;
  97
  98         return u2d_readl(U2DOTGUCR) & U2DOTGUCR_RDATA;
  99 }
 100
 101 static int pxa310_ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg)
 102 {
 103         if (pxa310_ulpi_get_phymode() != SYNCH) {
 104                 pr_warning("%s: PHY is not in SYNCH mode!\n", __func__);
 105                 return -EBUSY;
 106         }
 107
 108         u2d_writel(U2DOTGUCR, U2DOTGUCR_RUN | (reg << 16) | (val << 8));
 109         msleep(5);
 110
 111         return pxa310_ulpi_poll();
 112 }
 113
 114 struct otg_io_access_ops pxa310_ulpi_access_ops = {
 115         .read   = pxa310_ulpi_read,
 116         .write  = pxa310_ulpi_write,
 117 };
 118
 119 static void pxa310_otg_transceiver_rtsm(void)
 120 {
 121         u32 u2dotgcr;
 122
 123         /* put PHY to sync mode */
 124         u2dotgcr = u2d_readl(U2DOTGCR);
 125         u2dotgcr |=  U2DOTGCR_RTSM | U2DOTGCR_UTMID;
 126         u2d_writel(U2DOTGCR, u2dotgcr);
 127         msleep(10);
 128
 129         /* setup OTG sync mode */
 130         u2dotgcr = u2d_readl(U2DOTGCR);
 131         u2dotgcr |= U2DOTGCR_ULAF;
 132         u2dotgcr &= ~(U2DOTGCR_SMAF | U2DOTGCR_CKAF);
 133         u2d_writel(U2DOTGCR, u2dotgcr);
 134 }
 135
 136 static int pxa310_start_otg_host_transcvr(struct usb_bus *host)
 137 {
 138         int err;
 139
 140         pxa310_otg_transceiver_rtsm();
 141
 142         err = otg_init(u2d->otg);
 143         if (err) {
 144                 pr_err("OTG transceiver init failed");
 145                 return err;
 146         }
 147
 148         err = otg_set_vbus(u2d->otg, 1);
 149         if (err) {
 150                 pr_err("OTG transceiver VBUS set failed");
 151                 return err;
 152         }
 153
 154         err = otg_set_host(u2d->otg, host);
 155         if (err)
 156                 pr_err("OTG transceiver Host mode set failed");
 157
 158         return err;
 159 }
 160
 161 static int pxa310_start_otg_hc(struct usb_bus *host)
 162 {
 163         u32 u2dotgcr;
 164         int err;
 165
 166         /* disable USB device controller */
 167         u2d_writel(U2DCR, u2d_readl(U2DCR) & ~U2DCR_UDE);
 168         u2d_writel(U2DOTGCR, u2d_readl(U2DOTGCR) | U2DOTGCR_UTMID);
 169         u2d_writel(U2DOTGICR, u2d_readl(U2DOTGICR) & ~0x37F7F);
 170
 171         err = pxa310_start_otg_host_transcvr(host);
 172         if (err)
 173                 return err;
 174
 175         /* set xceiver mode */
 176         if (u2d->ulpi_mode & ULPI_IC_6PIN_SERIAL)
 177                 u2d_writel(U2DP3CR, u2d_readl(U2DP3CR) & ~U2DP3CR_P2SS);
 178         else if (u2d->ulpi_mode & ULPI_IC_3PIN_SERIAL)
 179                 u2d_writel(U2DP3CR, u2d_readl(U2DP3CR) | U2DP3CR_P2SS);
 180
 181         /* start OTG host controller */
 182         u2dotgcr = u2d_readl(U2DOTGCR) | U2DOTGCR_SMAF;
 183         u2d_writel(U2DOTGCR, u2dotgcr & ~(U2DOTGCR_ULAF | U2DOTGCR_CKAF));
 184
 185         return 0;
 186 }
 187
 188 static void pxa310_stop_otg_hc(void)
 189 {
 190         pxa310_otg_transceiver_rtsm();
 191
 192         otg_set_host(u2d->otg, NULL);
 193         otg_set_vbus(u2d->otg, 0);
 194         otg_shutdown(u2d->otg);
 195 }
 196
 197 static void pxa310_u2d_setup_otg_hc(void)
 198 {
 199         u32 u2dotgcr;
 200
 201         u2dotgcr = u2d_readl(U2DOTGCR);
 202         u2dotgcr |= U2DOTGCR_ULAF | U2DOTGCR_UTMID;
 203         u2dotgcr &= ~(U2DOTGCR_SMAF | U2DOTGCR_CKAF);
 204         u2d_writel(U2DOTGCR, u2dotgcr);
 205         msleep(5);
 206         u2d_writel(U2DOTGCR, u2dotgcr | U2DOTGCR_ULE);
 207         msleep(5);
 208         u2d_writel(U2DOTGICR, u2d_readl(U2DOTGICR) & ~0x37F7F);
 209 }
 210
 211 static int pxa310_otg_init(struct pxa3xx_u2d_platform_data *pdata)
 212 {
 213         unsigned int ulpi_mode = ULPI_OTG_DRVVBUS;
 214
 215         if (pdata) {
 216                 if (pdata->ulpi_mode & ULPI_SER_6PIN)
 217                         ulpi_mode |= ULPI_IC_6PIN_SERIAL;
 218                 else if (pdata->ulpi_mode & ULPI_SER_3PIN)
 219                         ulpi_mode |= ULPI_IC_3PIN_SERIAL;
 220         }
 221
 222         u2d->ulpi_mode = ulpi_mode;
 223
 224         u2d->otg = otg_ulpi_create(&pxa310_ulpi_access_ops, ulpi_mode);
 225         if (!u2d->otg)
 226                 return -ENOMEM;
 227
 228         u2d->otg->io_priv = u2d->mmio_base;
 229
 230         return 0;
 231 }
 232
 233 static void pxa310_otg_exit(void)
 234 {
 235         kfree(u2d->otg);
 236 }
 237 #else
 238 static inline void pxa310_u2d_setup_otg_hc(void) {}
 239 static inline int pxa310_start_otg_hc(struct usb_bus *host)
 240 {
 241         return 0;
 242 }
 243 static inline void pxa310_stop_otg_hc(void) {}
 244 static inline int pxa310_otg_init(struct pxa3xx_u2d_platform_data *pdata)
 245 {
 246         return 0;
 247 }
 248 static inline void pxa310_otg_exit(void) {}
 249 #endif /* CONFIG_PXA310_ULPI */
 250
 251 int pxa3xx_u2d_start_hc(struct usb_bus *host)
 252 {
 253         int err = 0;
 254
 255         /* In case the PXA3xx ULPI isn't used, do nothing. */
 256         if (!u2d)
 257                 return 0;
 258
 259         clk_enable(u2d->clk);
 260
 261         if (cpu_is_pxa310()) {
 262                 pxa310_u2d_setup_otg_hc();
 263                 err = pxa310_start_otg_hc(host);
 264         }
 265
 266         return err;
 267 }
 268 EXPORT_SYMBOL_GPL(pxa3xx_u2d_start_hc);
 269
 270 void pxa3xx_u2d_stop_hc(struct usb_bus *host)
 271 {
 272         /* In case the PXA3xx ULPI isn't used, do nothing. */
 273         if (!u2d)
 274                 return;
 275
 276         if (cpu_is_pxa310())
 277                 pxa310_stop_otg_hc();
 278
 279         clk_disable(u2d->clk);
 280 }
 281 EXPORT_SYMBOL_GPL(pxa3xx_u2d_stop_hc);
 282
 283 static int pxa3xx_u2d_probe(struct platform_device *pdev)
 284 {
 285         struct pxa3xx_u2d_platform_data *pdata = pdev->dev.platform_data;
 286         struct resource *r;
 287         int err;
 288
 289         u2d = kzalloc(sizeof(struct pxa3xx_u2d_ulpi), GFP_KERNEL);
 290         if (!u2d) {
 291                 dev_err(&pdev->dev, "failed to allocate memory\n");
 292                 return -ENOMEM;
 293         }
 294
 295         u2d->clk = clk_get(&pdev->dev, NULL);
 296         if (IS_ERR(u2d->clk)) {
 297                 dev_err(&pdev->dev, "failed to get u2d clock\n");
 298                 err = PTR_ERR(u2d->clk);
 299                 goto err_free_mem;
 300         }
 301
 302         r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 303         if (!r) {
 304                 dev_err(&pdev->dev, "no IO memory resource defined\n");
 305                 err = -ENODEV;
 306                 goto err_put_clk;
 307         }
 308
 309         r = request_mem_region(r->start, resource_size(r), pdev->name);
 310         if (!r) {
 311                 dev_err(&pdev->dev, "failed to request memory resource\n");
 312                 err = -EBUSY;
 313                 goto err_put_clk;
 314         }
 315
 316         u2d->mmio_base = ioremap(r->start, resource_size(r));
 317         if (!u2d->mmio_base) {
 318                 dev_err(&pdev->dev, "ioremap() failed\n");
 319                 err = -ENODEV;
 320                 goto err_free_res;
 321         }
 322
 323         if (pdata->init) {
 324                 err = pdata->init(&pdev->dev);
 325                 if (err)
 326                         goto err_free_io;
 327         }
 328
 329         /* Only PXA310 U2D has OTG functionality */
 330         if (cpu_is_pxa310()) {
 331                 err = pxa310_otg_init(pdata);
 332                 if (err)
 333                         goto err_free_plat;
 334         }
 335
 336         platform_set_drvdata(pdev, &u2d);
 337
 338         return 0;
 339
 340 err_free_plat:
 341         if (pdata->exit)
 342                 pdata->exit(&pdev->dev);
 343 err_free_io:
 344         iounmap(u2d->mmio_base);
 345 err_free_res:
 346         release_mem_region(r->start, resource_size(r));
 347 err_put_clk:
 348         clk_put(u2d->clk);
 349 err_free_mem:
 350         kfree(u2d);
 351         return err;
 352 }
 353
 354 static int pxa3xx_u2d_remove(struct platform_device *pdev)
 355 {
 356         struct pxa3xx_u2d_platform_data *pdata = pdev->dev.platform_data;
 357         struct resource *r;
 358
 359         if (cpu_is_pxa310()) {
 360                 pxa310_stop_otg_hc();
 361                 pxa310_otg_exit();
 362         }
 363
 364         if (pdata->exit)
 365                 pdata->exit(&pdev->dev);
 366
 367         platform_set_drvdata(pdev, NULL);
 368         iounmap(u2d->mmio_base);
 369         r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 370         release_mem_region(r->start, resource_size(r));
 371
 372         clk_put(u2d->clk);
 373
 374         kfree(u2d);
 375
 376         return 0;
 377 }
 378
 379 static struct platform_driver pxa3xx_u2d_ulpi_driver = {
 380         .driver         = {
 381                 .name   = "pxa3xx-u2d",
 382                 .owner  = THIS_MODULE,
 383         },
 384         .probe          = pxa3xx_u2d_probe,
 385         .remove         = pxa3xx_u2d_remove,
 386 };
 387
 388 static int pxa3xx_u2d_ulpi_init(void)
 389 {
 390         return platform_driver_register(&pxa3xx_u2d_ulpi_driver);
 391 }
 392 module_init(pxa3xx_u2d_ulpi_init);
 393
 394 static void __exit pxa3xx_u2d_ulpi_exit(void)
 395 {
 396         platform_driver_unregister(&pxa3xx_u2d_ulpi_driver);
 397 }
 398 module_exit(pxa3xx_u2d_ulpi_exit);
 399
 400 MODULE_DESCRIPTION("PXA3xx U2D ULPI driver");
 401 MODULE_AUTHOR("Igor Grinberg");
 402 MODULE_LICENSE("GPL v2");